IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ff0000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ff0000) AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:02899000 set TERM ph data[0]=0:2899000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b230 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c6e000, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0261a000 set TERM ph data[0]=0:261a000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b0fc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058740, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ef2528 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c72d00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ff0000) AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:024b2000 ph data[0]=0:24b2000 (fff) get Phys(data[n=1+1000]=f6ff1000) AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0261b000 set TERM ph data[1]=0:261b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ef2528 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c73230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ff0000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ff0000) AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0240a000 set TERM ph data[0]=0:240a000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058720, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 fixme:(dll/win32/rpcrt4/rpc_server.c:1739) (0x1000): stub TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ef2528 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9ad00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ff0000) AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:029f3000 ph data[0]=0:29f3000 (fff) get Phys(data[n=1+1000]=f6ff1000) AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0269c000 set TERM ph data[1]=0:269c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ef2528 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c6e000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0bc50000 set TERM ph data[0]=0:bc50000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ef2528 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x9, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6776000, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6776000 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6776000: cmd aligned b6776080, d=20 ahci_cmd_ptr 0xb6776080 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6776080) AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6776080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700348c ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6776000, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6776000 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000 AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080) prd_length 0x9, flags 0x45, base 8e39080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5ef2528 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9aec8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x9, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ef2528 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c731e0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0a60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0a60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:10bf2000 ph data[0]=0:10bf2000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bca3000 ph data[1]=0:bca3000 (fff) get Phys(data[n=2+1000]=f6c42000) AtapiVirtToPhysAddr_: f6c42000 -> 00000000:10bd4000 ph data[2]=0:10bd4000 (fff) get Phys(data[n=3+1000]=f6c43000) AtapiVirtToPhysAddr_: f6c43000 -> 00000000:0bca5000 ph data[3]=0:bca5000 (fff) get Phys(data[n=4+1000]=f6c44000) AtapiVirtToPhysAddr_: f6c44000 -> 00000000:10be6000 ph data[4]=0:10be6000 (fff) get Phys(data[n=5+1000]=f6c45000) AtapiVirtToPhysAddr_: f6c45000 -> 00000000:0bcff000 ph data[5]=0:bcff000 (fff) get Phys(data[n=6+1000]=f6c46000) AtapiVirtToPhysAddr_: f6c46000 -> 00000000:0c828000 ph data[6]=0:c828000 (fff) get Phys(data[n=7+1000]=f6c47000) AtapiVirtToPhysAddr_: f6c47000 -> 00000000:0bc99000 ph data[7]=0:bc99000 (fff) get Phys(data[n=8+1000]=f6c48000) AtapiVirtToPhysAddr_: f6c48000 -> 00000000:10bea000 ph data[8]=0:10bea000 (fff) get Phys(data[n=9+1000]=f6c49000) AtapiVirtToPhysAddr_: f6c49000 -> 00000000:0bc9b000 ph data[9]=0:bc9b000 (fff) get Phys(data[n=10+1000]=f6c4a000) AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:10bcc000 ph data[10]=0:10bcc000 (fff) get Phys(data[n=11+1000]=f6c4b000) AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:0bc9d000 ph data[11]=0:bc9d000 (fff) get Phys(data[n=12+1000]=f6c4c000) AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:10bde000 ph data[12]=0:10bde000 (fff) get Phys(data[n=13+1000]=f6c4d000) AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:0bcf7000 ph data[13]=0:bcf7000 (fff) get Phys(data[n=14+1000]=f6c4e000) AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:0c820000 ph data[14]=0:c820000 (fff) get Phys(data[n=15+1000]=f6c4f000) AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:0bc91000 set TERM ph data[15]=0:bc91000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0a60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c731e0 ** Ide: Command AtaReq 0xb6776000 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0ae0, OrigWordsRequested 0x4100, DevSize 0x41 IdeReadWrite (REQ): Starting sector is 38fc0ae0, Number of WORDS 0x4100, DevSize 0x41 AtaReq 0xb6776000: cmd aligned b6776080, d=20 ahci_cmd_ptr 0xb6776080 AtapiDmaSetup: mode 0x0, data f6c50000, count 8200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6776080) AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080 get Phys(data[0]=f6c50000) AtapiVirtToPhysAddr_: f6c50000 -> 00000000:10be2000 ph data[0]=0:10be2000 (fff) get Phys(data[n=1+1000]=f6c51000) AtapiVirtToPhysAddr_: f6c51000 -> 00000000:0bc93000 ph data[1]=0:bc93000 (fff) get Phys(data[n=2+1000]=f6c52000) AtapiVirtToPhysAddr_: f6c52000 -> 00000000:0c82c000 ph data[2]=0:c82c000 (fff) get Phys(data[n=3+1000]=f6c53000) AtapiVirtToPhysAddr_: f6c53000 -> 00000000:0bc95000 ph data[3]=0:bc95000 (fff) get Phys(data[n=4+1000]=f6c54000) AtapiVirtToPhysAddr_: f6c54000 -> 00000000:10bd6000 ph data[4]=0:10bd6000 (fff) get Phys(data[n=5+1000]=f6c55000) AtapiVirtToPhysAddr_: f6c55000 -> 00000000:0bcef000 ph data[5]=0:bcef000 (fff) get Phys(data[n=6+1000]=f6c56000) AtapiVirtToPhysAddr_: f6c56000 -> 00000000:0c818000 ph data[6]=0:c818000 (fff) get Phys(data[n=7+1000]=f6c57000) AtapiVirtToPhysAddr_: f6c57000 -> 00000000:0bd09000 ph data[7]=0:bd09000 (fff) get Phys(data[n=8+1000]=f6c58000) AtapiVirtToPhysAddr_: f6c58000 -> 00000000:10bda000 set TERM ph data[8]=0:10bda000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6776080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b230 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ff0000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ff0000) AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0c822000 set TERM ph data[0]=0:c822000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c92d00 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059550, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39059550, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:10be5000 ph data[0]=0:10be5000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:108ae000 set TERM ph data[1]=0:108ae000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6776000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0ae0, Count 0x41(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000 AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080) prd_length 0x9, flags 0x5, base 8e39080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4100, WordsLeft 4100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8200, full size 8200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5eb9150 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa960 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059550, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb9150, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb9150 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eb9150 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b174 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:15d02000 ph data[0]=0:15d02000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:0bcab000 set TERM ph data[1]=0:bcab000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb9150, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb9150 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eb9150 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9ad00 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:02852000 ph data[0]=0:2852000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:024d3000 set TERM ph data[1]=0:24d3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6776000, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6776000 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6776000: cmd aligned b6776080, d=20 ahci_cmd_ptr 0xb6776080 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6776080) AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6776080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb81b0, CDB 0xb5eb81e0, AtaReq 0xb67800f0, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5eb81b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb8390, CDB 0xb5eb83c0, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c931e0 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6ba6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:024c2000 ph data[0]=0:24c2000 (fff) get Phys(data[n=1+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:02613000 ph data[1]=0:2613000 (fff) get Phys(data[n=2+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:024dc000 ph data[2]=0:24dc000 (fff) get Phys(data[n=3+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:0281d000 ph data[3]=0:281d000 (fff) get Phys(data[n=4+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:0266e000 ph data[4]=0:266e000 (fff) get Phys(data[n=5+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:02627000 ph data[5]=0:2627000 (fff) get Phys(data[n=6+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:024b0000 ph data[6]=0:24b0000 (fff) get Phys(data[n=7+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:02811000 ph data[7]=0:2811000 (fff) get Phys(data[n=8+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:02652000 ph data[8]=0:2652000 (fff) get Phys(data[n=9+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:0246b000 ph data[9]=0:246b000 (fff) get Phys(data[n=10+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:024e4000 ph data[10]=0:24e4000 (fff) get Phys(data[n=11+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:0276d000 ph data[11]=0:276d000 (fff) get Phys(data[n=12+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:02666000 ph data[12]=0:2666000 (fff) get Phys(data[n=13+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:02467000 ph data[13]=0:2467000 (fff) get Phys(data[n=14+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:024b8000 ph data[14]=0:24b8000 (fff) get Phys(data[n=15+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:02809000 set TERM ph data[15]=0:2809000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5eb8390 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb9150, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb9150 AtapiInterrupt: NextRequest, srb=0xb5eb8390 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb8390, CDB 0xb5eb83c0, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93064 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059560, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x10, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb8390 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c931e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390595e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390595e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bb6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:0264a000 ph data[0]=0:264a000 (fff) get Phys(data[n=1+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:0276b000 ph data[1]=0:276b000 (fff) get Phys(data[n=2+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:024ec000 ph data[2]=0:24ec000 (fff) get Phys(data[n=3+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:02765000 ph data[3]=0:2765000 (fff) get Phys(data[n=4+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:0265e000 ph data[4]=0:265e000 (fff) get Phys(data[n=5+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:0246f000 ph data[5]=0:246f000 (fff) get Phys(data[n=6+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:02628000 ph data[6]=0:2628000 (fff) get Phys(data[n=7+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:02759000 ph data[7]=0:2759000 (fff) get Phys(data[n=8+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:02642000 ph data[8]=0:2642000 (fff) get Phys(data[n=9+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:02753000 ph data[9]=0:2753000 (fff) get Phys(data[n=10+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:0264c000 ph data[10]=0:264c000 (fff) get Phys(data[n=11+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:0275d000 ph data[11]=0:275d000 (fff) get Phys(data[n=12+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:02656000 ph data[12]=0:2656000 (fff) get Phys(data[n=13+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:02777000 ph data[13]=0:2777000 (fff) get Phys(data[n=14+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:02620000 ph data[14]=0:2620000 (fff) get Phys(data[n=15+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:02751000 set TERM ph data[15]=0:2751000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb8390, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb8390 AtapiInterrupt: NextRequest, srb=0xb5eb81b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb81b0, CDB 0xb5eb81e0, AtaReq 0xb67800f0, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x9, flags 0x45, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb81b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb8390, CDB 0xb5eb83c0, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c931e0 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6bc6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:0262a000 ph data[0]=0:262a000 (fff) get Phys(data[n=1+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:0274b000 ph data[1]=0:274b000 (fff) get Phys(data[n=2+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:0263c000 ph data[2]=0:263c000 (fff) get Phys(data[n=3+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:02755000 ph data[3]=0:2755000 (fff) get Phys(data[n=4+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:0264e000 ph data[4]=0:264e000 (fff) get Phys(data[n=5+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:0276f000 ph data[5]=0:276f000 (fff) get Phys(data[n=6+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:025d0000 ph data[6]=0:25d0000 (fff) get Phys(data[n=7+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:02741000 ph data[7]=0:2741000 (fff) get Phys(data[n=8+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:02622000 ph data[8]=0:2622000 (fff) get Phys(data[n=9+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:02743000 ph data[9]=0:2743000 (fff) get Phys(data[n=10+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:02634000 ph data[10]=0:2634000 (fff) get Phys(data[n=11+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:02745000 ph data[11]=0:2745000 (fff) get Phys(data[n=12+1000]=f6bd2000) AtapiVirtToPhysAddr_: f6bd2000 -> 00000000:02636000 ph data[12]=0:2636000 (fff) get Phys(data[n=13+1000]=f6bd3000) AtapiVirtToPhysAddr_: f6bd3000 -> 00000000:02757000 ph data[13]=0:2757000 (fff) get Phys(data[n=14+1000]=f6bd4000) AtapiVirtToPhysAddr_: f6bd4000 -> 00000000:02610000 ph data[14]=0:2610000 (fff) get Phys(data[n=15+1000]=f6bd5000) AtapiVirtToPhysAddr_: f6bd5000 -> 00000000:02731000 set TERM ph data[15]=0:2731000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5eb8390 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb81b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb81b0 AtapiInterrupt: NextRequest, srb=0xb5ef2528 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c930b0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x9, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb81b0, CDB 0xb5eb81e0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c931e0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390596e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390596e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6bd6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6bd6000) AtapiVirtToPhysAddr_: f6bd6000 -> 00000000:0261a000 ph data[0]=0:261a000 (fff) get Phys(data[n=1+1000]=f6bd7000) AtapiVirtToPhysAddr_: f6bd7000 -> 00000000:0273b000 ph data[1]=0:273b000 (fff) get Phys(data[n=2+1000]=f6bd8000) AtapiVirtToPhysAddr_: f6bd8000 -> 00000000:0262c000 ph data[2]=0:262c000 (fff) get Phys(data[n=3+1000]=f6bd9000) AtapiVirtToPhysAddr_: f6bd9000 -> 00000000:0273d000 ph data[3]=0:273d000 (fff) get Phys(data[n=4+1000]=f6bda000) AtapiVirtToPhysAddr_: f6bda000 -> 00000000:0269e000 ph data[4]=0:269e000 (fff) get Phys(data[n=5+1000]=f6bdb000) AtapiVirtToPhysAddr_: f6bdb000 -> 00000000:0274f000 ph data[5]=0:274f000 (fff) get Phys(data[n=6+1000]=f6bdc000) AtapiVirtToPhysAddr_: f6bdc000 -> 00000000:02608000 ph data[6]=0:2608000 (fff) get Phys(data[n=7+1000]=f6bdd000) AtapiVirtToPhysAddr_: f6bdd000 -> 00000000:028f1000 ph data[7]=0:28f1000 (fff) get Phys(data[n=8+1000]=f6bde000) AtapiVirtToPhysAddr_: f6bde000 -> 00000000:02692000 ph data[8]=0:2692000 (fff) get Phys(data[n=9+1000]=f6bdf000) AtapiVirtToPhysAddr_: f6bdf000 -> 00000000:026db000 ph data[9]=0:26db000 (fff) get Phys(data[n=10+1000]=f6be0000) AtapiVirtToPhysAddr_: f6be0000 -> 00000000:02624000 ph data[10]=0:2624000 (fff) get Phys(data[n=11+1000]=f6be1000) AtapiVirtToPhysAddr_: f6be1000 -> 00000000:024b5000 ph data[11]=0:24b5000 (fff) get Phys(data[n=12+1000]=f6be2000) AtapiVirtToPhysAddr_: f6be2000 -> 00000000:0268e000 ph data[12]=0:268e000 (fff) get Phys(data[n=13+1000]=f6be3000) AtapiVirtToPhysAddr_: f6be3000 -> 00000000:02427000 ph data[13]=0:2427000 (fff) get Phys(data[n=14+1000]=f6be4000) AtapiVirtToPhysAddr_: f6be4000 -> 00000000:02600000 ph data[14]=0:2600000 (fff) get Phys(data[n=15+1000]=f6be5000) AtapiVirtToPhysAddr_: f6be5000 -> 00000000:028e9000 set TERM ph data[15]=0:28e9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5eb81b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6776000, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6776000 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000 AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080) prd_length 0x9, flags 0x45, base 8e39080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fdf858 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5eb9150 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fdfa1c ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390595e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb9150, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb9150 AtapiInterrupt: NextRequest, srb=0xb5eb8390 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb8390, CDB 0xb5eb83c0, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fdf858 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059660, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x10, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb8390 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb8390, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb8390 AtapiInterrupt: NextRequest, srb=0xb5eb81b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb81b0, CDB 0xb5eb81e0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fdf6f8 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390596e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x10, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb81b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb81b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb81b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eb9150 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c731e0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0a60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0a60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c40000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:024bf000 ph data[0]=0:24bf000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02640000 ph data[1]=0:2640000 (fff) get Phys(data[n=2+1000]=f6c42000) AtapiVirtToPhysAddr_: f6c42000 -> 00000000:024b9000 ph data[2]=0:24b9000 (fff) get Phys(data[n=3+1000]=f6c43000) AtapiVirtToPhysAddr_: f6c43000 -> 00000000:029ea000 ph data[3]=0:29ea000 (fff) get Phys(data[n=4+1000]=f6c44000) AtapiVirtToPhysAddr_: f6c44000 -> 00000000:024c3000 ph data[4]=0:24c3000 (fff) get Phys(data[n=5+1000]=f6c45000) AtapiVirtToPhysAddr_: f6c45000 -> 00000000:02654000 ph data[5]=0:2654000 (fff) get Phys(data[n=6+1000]=f6c46000) AtapiVirtToPhysAddr_: f6c46000 -> 00000000:024e5000 ph data[6]=0:24e5000 (fff) get Phys(data[n=7+1000]=f6c47000) AtapiVirtToPhysAddr_: f6c47000 -> 00000000:02956000 ph data[7]=0:2956000 (fff) get Phys(data[n=8+1000]=f6c48000) AtapiVirtToPhysAddr_: f6c48000 -> 00000000:024c7000 ph data[8]=0:24c7000 (fff) get Phys(data[n=9+1000]=f6c49000) AtapiVirtToPhysAddr_: f6c49000 -> 00000000:02638000 ph data[9]=0:2638000 (fff) get Phys(data[n=10+1000]=f6c4a000) AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:028a1000 ph data[10]=0:28a1000 (fff) get Phys(data[n=11+1000]=f6c4b000) AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:029f2000 ph data[11]=0:29f2000 (fff) get Phys(data[n=12+1000]=f6c4c000) AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:024cb000 ph data[12]=0:24cb000 (fff) get Phys(data[n=13+1000]=f6c4d000) AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:029fc000 ph data[13]=0:29fc000 (fff) get Phys(data[n=14+1000]=f6c4e000) AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:024ed000 ph data[14]=0:24ed000 (fff) get Phys(data[n=15+1000]=f6c4f000) AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:0295e000 set TERM ph data[15]=0:295e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0a60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x10, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c731e0 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0ae0, OrigWordsRequested 0x4100, DevSize 0x41 IdeReadWrite (REQ): Starting sector is 38fc0ae0, Number of WORDS 0x4100, DevSize 0x41 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6c50000, count 8200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6c50000) AtapiVirtToPhysAddr_: f6c50000 -> 00000000:02847000 ph data[0]=0:2847000 (fff) get Phys(data[n=1+1000]=f6c51000) AtapiVirtToPhysAddr_: f6c51000 -> 00000000:029d0000 ph data[1]=0:29d0000 (fff) get Phys(data[n=2+1000]=f6c52000) AtapiVirtToPhysAddr_: f6c52000 -> 00000000:028a9000 ph data[2]=0:28a9000 (fff) get Phys(data[n=3+1000]=f6c53000) AtapiVirtToPhysAddr_: f6c53000 -> 00000000:029fa000 ph data[3]=0:29fa000 (fff) get Phys(data[n=4+1000]=f6c54000) AtapiVirtToPhysAddr_: f6c54000 -> 00000000:0284b000 ph data[4]=0:284b000 (fff) get Phys(data[n=5+1000]=f6c55000) AtapiVirtToPhysAddr_: f6c55000 -> 00000000:02a04000 ph data[5]=0:2a04000 (fff) get Phys(data[n=6+1000]=f6c56000) AtapiVirtToPhysAddr_: f6c56000 -> 00000000:02615000 ph data[6]=0:2615000 (fff) get Phys(data[n=7+1000]=f6c57000) AtapiVirtToPhysAddr_: f6c57000 -> 00000000:02966000 ph data[7]=0:2966000 (fff) get Phys(data[n=8+1000]=f6c58000) AtapiVirtToPhysAddr_: f6c58000 -> 00000000:028af000 set TERM ph data[8]=0:28af000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b230 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c2a000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:028d7000 set TERM ph data[0]=0:28d7000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb9150, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb9150 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b0fc ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0ae0, Count 0x41(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x9, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4100, WordsLeft 4100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8200, full size 8200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058720, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x1, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eb9150 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b1e0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd26f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd26f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6b66000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:0bc85000 ph data[0]=0:bc85000 (fff) get Phys(data[n=1+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:0262e000 ph data[1]=0:262e000 (fff) get Phys(data[n=2+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:0bc67000 ph data[2]=0:bc67000 (fff) get Phys(data[n=3+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:02898000 ph data[3]=0:2898000 (fff) get Phys(data[n=4+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:0bc81000 ph data[4]=0:bc81000 (fff) get Phys(data[n=5+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:0260a000 ph data[5]=0:260a000 (fff) get Phys(data[n=6+1000]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:0bc73000 ph data[6]=0:bc73000 (fff) get Phys(data[n=7+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:0261c000 ph data[7]=0:261c000 (fff) get Phys(data[n=8+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:0bc7d000 ph data[8]=0:bc7d000 (fff) get Phys(data[n=9+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:02476000 ph data[9]=0:2476000 (fff) get Phys(data[n=10+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:0bc5f000 ph data[10]=0:bc5f000 (fff) get Phys(data[n=11+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:028a0000 ph data[11]=0:28a0000 (fff) get Phys(data[n=12+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:0bc79000 ph data[12]=0:bc79000 (fff) get Phys(data[n=13+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:026ca000 ph data[13]=0:26ca000 (fff) get Phys(data[n=14+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:0bc6b000 ph data[14]=0:bc6b000 (fff) get Phys(data[n=15+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:0246c000 set TERM ph data[15]=0:246c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd26f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x10, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b1e0 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2770, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2770, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6b76000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:0bc75000 ph data[0]=0:bc75000 (fff) get Phys(data[n=1+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:0273e000 ph data[1]=0:273e000 (fff) get Phys(data[n=2+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:0bc57000 ph data[2]=0:bc57000 (fff) get Phys(data[n=3+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:025f8000 ph data[3]=0:25f8000 (fff) get Phys(data[n=4+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:0bc71000 ph data[4]=0:bc71000 (fff) get Phys(data[n=5+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:026c2000 ph data[5]=0:26c2000 (fff) get Phys(data[n=6+1000]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:0bc63000 ph data[6]=0:bc63000 (fff) get Phys(data[n=7+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:02474000 ph data[7]=0:2474000 (fff) get Phys(data[n=8+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:0bc6d000 ph data[8]=0:bc6d000 (fff) get Phys(data[n=9+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:026e6000 ph data[9]=0:26e6000 (fff) get Phys(data[n=10+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:0bc4f000 ph data[10]=0:bc4f000 (fff) get Phys(data[n=11+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:02438000 ph data[11]=0:2438000 (fff) get Phys(data[n=12+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:02419000 ph data[12]=0:2419000 (fff) get Phys(data[n=13+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:026b2000 ph data[13]=0:26b2000 (fff) get Phys(data[n=14+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:0bc5b000 ph data[14]=0:bc5b000 (fff) get Phys(data[n=15+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:026cc000 set TERM ph data[15]=0:26cc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b1e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd27f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd27f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b86000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:0bc65000 ph data[0]=0:bc65000 (fff) get Phys(data[n=1+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:026de000 ph data[1]=0:26de000 (fff) get Phys(data[n=2+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:0261f000 ph data[2]=0:261f000 (fff) get Phys(data[n=3+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:026a0000 ph data[3]=0:26a0000 (fff) get Phys(data[n=4+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:0bd69000 ph data[4]=0:bd69000 (fff) get Phys(data[n=5+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:026aa000 ph data[5]=0:26aa000 (fff) get Phys(data[n=6+1000]=f6b8c000) AtapiVirtToPhysAddr_: f6b8c000 -> 00000000:0bd53000 ph data[6]=0:bd53000 (fff) get Phys(data[n=7+1000]=f6b8d000) AtapiVirtToPhysAddr_: f6b8d000 -> 00000000:026c4000 ph data[7]=0:26c4000 (fff) get Phys(data[n=8+1000]=f6b8e000) AtapiVirtToPhysAddr_: f6b8e000 -> 00000000:0bc5d000 ph data[8]=0:bc5d000 (fff) get Phys(data[n=9+1000]=f6b8f000) AtapiVirtToPhysAddr_: f6b8f000 -> 00000000:026d6000 ph data[9]=0:26d6000 (fff) get Phys(data[n=10+1000]=f6b90000) AtapiVirtToPhysAddr_: f6b90000 -> 00000000:0bd77000 ph data[10]=0:bd77000 (fff) get Phys(data[n=11+1000]=f6b91000) AtapiVirtToPhysAddr_: f6b91000 -> 00000000:02698000 ph data[11]=0:2698000 (fff) get Phys(data[n=12+1000]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:0bd71000 ph data[12]=0:bd71000 (fff) get Phys(data[n=13+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:026a2000 ph data[13]=0:26a2000 (fff) get Phys(data[n=14+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:026c3000 ph data[14]=0:26c3000 (fff) get Phys(data[n=15+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:026bc000 set TERM ph data[15]=0:26bc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b1e0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2870, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2870, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b96000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:0bc4d000 ph data[0]=0:bc4d000 (fff) get Phys(data[n=1+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:026ce000 ph data[1]=0:26ce000 (fff) get Phys(data[n=2+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:0bd7f000 ph data[2]=0:bd7f000 (fff) get Phys(data[n=3+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:02690000 ph data[3]=0:2690000 (fff) get Phys(data[n=4+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:0bd79000 ph data[4]=0:bd79000 (fff) get Phys(data[n=5+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:0bc7a000 ph data[5]=0:bc7a000 (fff) get Phys(data[n=6+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:0bd63000 ph data[6]=0:bd63000 (fff) get Phys(data[n=7+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:026b4000 ph data[7]=0:26b4000 (fff) get Phys(data[n=8+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:afd55000 ph data[8]=0:afd55000 (fff) get Phys(data[n=9+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:026c6000 ph data[9]=0:26c6000 (fff) get Phys(data[n=10+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:0bd87000 ph data[10]=0:bd87000 (fff) get Phys(data[n=11+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:02688000 ph data[11]=0:2688000 (fff) get Phys(data[n=12+1000]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:0bd89000 ph data[12]=0:bd89000 (fff) get Phys(data[n=13+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:0bc72000 ph data[13]=0:bc72000 (fff) get Phys(data[n=14+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:0bd6b000 ph data[14]=0:bd6b000 (fff) get Phys(data[n=15+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:025cc000 set TERM ph data[15]=0:25cc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea5cf8, CDB 0xb5ea5d28, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b230 ** Ide: Command AtaReq 0xb6776000 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0bb0, OrigWordsRequested 0x5d00, DevSize 0x5d IdeReadWrite (REQ): Starting sector is 38fc0bb0, Number of WORDS 0x5d00, DevSize 0x5d AtaReq 0xb6776000: cmd aligned b6776080, d=20 ahci_cmd_ptr 0xb6776080 AtapiDmaSetup: mode 0x0, data f6c1a000, count ba00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6776080) AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080 get Phys(data[0]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:02865000 ph data[0]=0:2865000 (fff) get Phys(data[n=1+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:0bcbe000 ph data[1]=0:bcbe000 (fff) get Phys(data[n=2+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:02567000 ph data[2]=0:2567000 (fff) get Phys(data[n=3+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:02680000 ph data[3]=0:2680000 (fff) get Phys(data[n=4+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:02541000 ph data[4]=0:2541000 (fff) get Phys(data[n=5+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:0bc6a000 ph data[5]=0:bc6a000 (fff) get Phys(data[n=6+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:0bd7b000 ph data[6]=0:bd7b000 (fff) get Phys(data[n=7+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:0bc4c000 ph data[7]=0:bc4c000 (fff) get Phys(data[n=8+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:028fd000 ph data[8]=0:28fd000 (fff) get Phys(data[n=9+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:0bcb6000 ph data[9]=0:bcb6000 (fff) get Phys(data[n=10+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:0256f000 ph data[10]=0:256f000 (fff) get Phys(data[n=11+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:025a8000 set TERM ph data[11]=0:25a8000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6776080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5ea5cf8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4800, CDB 0xb5ea4830, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b26000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5ea4800 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4620, CDB 0xb5ea4650, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b36000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6b3a000) AtapiVirtToPhysAddr_: f6b3a000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6b3b000) AtapiVirtToPhysAddr_: f6b3b000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6b3c000) AtapiVirtToPhysAddr_: f6b3c000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6b3d000) AtapiVirtToPhysAddr_: f6b3d000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6b3e000) AtapiVirtToPhysAddr_: f6b3e000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6b3f000) AtapiVirtToPhysAddr_: f6b3f000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6b40000) AtapiVirtToPhysAddr_: f6b40000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6b41000) AtapiVirtToPhysAddr_: f6b41000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6b42000) AtapiVirtToPhysAddr_: f6b42000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6b43000) AtapiVirtToPhysAddr_: f6b43000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6b44000) AtapiVirtToPhysAddr_: f6b44000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6b45000) AtapiVirtToPhysAddr_: f6b45000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5ea4620 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677e0c0, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677e0c0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677e0c0: cmd aligned b677e180, d=60 ahci_cmd_ptr 0xb677e180 AtapiDmaSetup: mode 0x0, data f6b46000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677e180) AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180 get Phys(data[0]=f6b46000) AtapiVirtToPhysAddr_: f6b46000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6b47000) AtapiVirtToPhysAddr_: f6b47000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6b48000) AtapiVirtToPhysAddr_: f6b48000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6b49000) AtapiVirtToPhysAddr_: f6b49000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6b4a000) AtapiVirtToPhysAddr_: f6b4a000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6b4b000) AtapiVirtToPhysAddr_: f6b4b000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677e180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4260, CDB 0xb5ea4290, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b56000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5ea4260 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ebb168, CDB 0xb5ebb198, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c92c68 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c2a000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:025e5000 ph data[0]=0:25e5000 (fff) get Phys(data[n=1+1000]=f6c2b000) AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:afd0e000 set TERM ph data[1]=0:afd0e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5ebb168 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=a Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c7360c ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0a60, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fc0a60, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0bcdd000 ph data[0]=0:bcdd000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:0c7fe000 set TERM ph data[1]=0:c7fe000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 11 request(s)! AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb9150, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb9150 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: qd=a Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2770, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x10, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd27f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5ef2528 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2870, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0xb5eaefc0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0a60, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaefc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaefc0 AtapiInterrupt: NextRequest, srb=0xb5ea5cf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea5cf8, CDB 0xb5ea5d28, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa960 ** Ide: Command AtaReq 0xb6776000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0bb0, Count 0x5d(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000 AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080) prd_length 0xc, flags 0x5, base 8e39080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea5cf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5d00, WordsLeft 5d00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ba00, full size ba00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea5cf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea5cf8 AtapiInterrupt: NextRequest, srb=0xb5ebb168 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ebb168, CDB 0xb5ebb198, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b59c ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ebb168 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ebb168, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ebb168 AtapiInterrupt: NextRequest, srb=0xb5ea4800 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4800, CDB 0xb5ea4830, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b58c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x9, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4800 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4800, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4800 AtapiInterrupt: NextRequest, srb=0xb5ea4620 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4620, CDB 0xb5ea4650, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b3f8 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4620 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b60c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0bb0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fc0bb0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0253f000 ph data[0]=0:253f000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:02518000 set TERM ph data[1]=0:2518000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4620, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4620 AtapiInterrupt: NextRequest, srb=0xb5ea4440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677e0c0, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b4cc ** Ide: Command AtaReq 0xb677e0c0 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0 AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180) prd_length 0x9, flags 0x45, base 8e41180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4620, CDB 0xb5ea4650, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b60c ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd26f0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fd26f0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6ff0000) AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:02529000 ph data[0]=0:2529000 (fff) get Phys(data[n=1+1000]=f6ff1000) AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0252a000 set TERM ph data[0]=0:2529000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ea4620 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0xb5ea4260 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4260, CDB 0xb5ea4290, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c73740 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x9, flags 0x45, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4260 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4260, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4260 AtapiInterrupt: NextRequest, srb=0xb5ea4620 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4620, CDB 0xb5ea4650, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c92e30 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd26f0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x1, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4620 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4620, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4620 AtapiInterrupt: NextRequest, srb=0xb5ef2528 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0bb0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef2528 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef2528, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef2528 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ea4440 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c92c68 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059550, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39059550, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0254b000 ph data[0]=0:254b000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:0253c000 set TERM ph data[1]=0:253c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059550, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ea4440 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704acec ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0c80b000 ph data[0]=0:c80b000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:10954000 set TERM ph data[1]=0:10954000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ea4440 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c92d00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059550, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39059550, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:02622000 ph data[0]=0:2622000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:0273b000 set TERM ph data[1]=0:273b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059550, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ea4440 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b40c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ff0000, count 1c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ff0000) AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:024a2000 ph data[0]=0:24a2000 (fff) get Phys(data[n=1+1000]=f6ff1000) AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0bc83000 set TERM ph data[1]=0:bc83000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c931e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:0253a000 ph data[0]=0:253a000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:0264b000 ph data[1]=0:264b000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:0284c000 ph data[2]=0:284c000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:02665000 ph data[3]=0:2665000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:028d6000 ph data[4]=0:28d6000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:024cf000 ph data[5]=0:24cf000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:023f8000 ph data[6]=0:23f8000 (fff) get Phys(data[n=7+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:024c1000 ph data[7]=0:24c1000 (fff) get Phys(data[n=8+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:025c2000 ph data[8]=0:25c2000 (fff) get Phys(data[n=9+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:024db000 ph data[9]=0:24db000 (fff) get Phys(data[n=10+1000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:02544000 ph data[10]=0:2544000 (fff) get Phys(data[n=11+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:0266d000 ph data[11]=0:266d000 (fff) get Phys(data[n=12+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:028ce000 ph data[12]=0:28ce000 (fff) get Phys(data[n=13+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:0285f000 ph data[13]=0:285f000 (fff) get Phys(data[n=14+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:023f0000 ph data[14]=0:23f0000 (fff) get Phys(data[n=15+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:02831000 set TERM ph data[15]=0:2831000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered e00, WordsLeft e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1c00, full size 1c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93094 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059560, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eed388 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c931e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390595e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390595e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:0240a000 ph data[0]=0:240a000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:024d3000 ph data[1]=0:24d3000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:02864000 ph data[2]=0:2864000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:0283d000 ph data[3]=0:283d000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:028c6000 ph data[4]=0:28c6000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:0279f000 ph data[5]=0:279f000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:023e8000 ph data[6]=0:23e8000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:02839000 ph data[7]=0:2839000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:02402000 ph data[8]=0:2402000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:0282b000 ph data[9]=0:282b000 (fff) get Phys(data[n=10+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:0241c000 ph data[10]=0:241c000 (fff) get Phys(data[n=11+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:02845000 ph data[11]=0:2845000 (fff) get Phys(data[n=12+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:025de000 ph data[12]=0:25de000 (fff) get Phys(data[n=13+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:026d7000 ph data[13]=0:26d7000 (fff) get Phys(data[n=14+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:023e0000 ph data[14]=0:23e0000 (fff) get Phys(data[n=15+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:02841000 set TERM ph data[15]=0:2841000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390595e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c931e0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:023fa000 ph data[0]=0:23fa000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:02833000 ph data[1]=0:2833000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:02414000 ph data[2]=0:2414000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:0284d000 ph data[3]=0:284d000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:02926000 ph data[4]=0:2926000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:026df000 ph data[5]=0:26df000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:024c0000 ph data[6]=0:24c0000 (fff) get Phys(data[n=7+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:02889000 ph data[7]=0:2889000 (fff) get Phys(data[n=8+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:024da000 ph data[8]=0:24da000 (fff) get Phys(data[n=9+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:0283b000 ph data[9]=0:283b000 (fff) get Phys(data[n=10+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:0240c000 ph data[10]=0:240c000 (fff) get Phys(data[n=11+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:02855000 ph data[11]=0:2855000 (fff) get Phys(data[n=12+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:0242e000 ph data[12]=0:242e000 (fff) get Phys(data[n=13+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:026e7000 ph data[13]=0:26e7000 (fff) get Phys(data[n=14+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:02928000 ph data[14]=0:2928000 (fff) get Phys(data[n=15+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:02891000 set TERM ph data[15]=0:2891000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5ea4440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93038 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059660, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c931e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390596e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390596e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:0265a000 ph data[0]=0:265a000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:02843000 ph data[1]=0:2843000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:02404000 ph data[2]=0:2404000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:0277d000 ph data[3]=0:277d000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:0241e000 ph data[4]=0:241e000 (fff) get Phys(data[n=5+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:0273f000 ph data[5]=0:273f000 (fff) get Phys(data[n=6+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:02920000 ph data[6]=0:2920000 (fff) get Phys(data[n=7+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:026c9000 ph data[7]=0:26c9000 (fff) get Phys(data[n=8+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:0263a000 ph data[8]=0:263a000 (fff) get Phys(data[n=9+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:026cb000 ph data[9]=0:26cb000 (fff) get Phys(data[n=10+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:0266c000 ph data[10]=0:266c000 (fff) get Phys(data[n=11+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:028a5000 ph data[11]=0:28a5000 (fff) get Phys(data[n=12+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:02916000 ph data[12]=0:2916000 (fff) get Phys(data[n=13+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:028df000 ph data[13]=0:28df000 (fff) get Phys(data[n=14+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:10c00000 ph data[14]=0:10c00000 (fff) get Phys(data[n=15+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:02721000 set TERM ph data[15]=0:2721000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c930b4 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390596e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eed388 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c9360c ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059560, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39059560, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:02518000 ph data[0]=0:2518000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:02529000 set TERM ph data[1]=0:2529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059560, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eed388 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c73174 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0bcea000 ph data[0]=0:bcea000 (fff) get Phys(data[n=1+1000]=f6c6f000) AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:028c3000 set TERM ph data[1]=0:28c3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eed388 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd28f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd28f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:10bca000 ph data[0]=0:10bca000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:0bcab000 ph data[1]=0:bcab000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:0c81c000 ph data[2]=0:c81c000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:0bcbd000 ph data[3]=0:bcbd000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:10bd6000 ph data[4]=0:10bd6000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:10c0f000 ph data[5]=0:10c0f000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:0c808000 ph data[6]=0:c808000 (fff) get Phys(data[n=7+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:0bca9000 ph data[7]=0:bca9000 (fff) get Phys(data[n=8+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:10bd2000 ph data[8]=0:10bd2000 (fff) get Phys(data[n=9+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:0bceb000 ph data[9]=0:bceb000 (fff) get Phys(data[n=10+1000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:0c824000 ph data[10]=0:c824000 (fff) get Phys(data[n=11+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:0bcb5000 ph data[11]=0:bcb5000 (fff) get Phys(data[n=12+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:10bde000 ph data[12]=0:10bde000 (fff) get Phys(data[n=13+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:0bccf000 ph data[13]=0:bccf000 (fff) get Phys(data[n=14+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:0c810000 ph data[14]=0:c810000 (fff) get Phys(data[n=15+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:0bce1000 set TERM ph data[15]=0:bce1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd28f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2970, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2970, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:10bda000 ph data[0]=0:10bda000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:0bcf3000 ph data[1]=0:bcf3000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:0c82c000 ph data[2]=0:c82c000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:0bcad000 ph data[3]=0:bcad000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:10be6000 ph data[4]=0:10be6000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:0bcd7000 ph data[5]=0:bcd7000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:0c818000 ph data[6]=0:c818000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:0bce9000 ph data[7]=0:bce9000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:10be2000 ph data[8]=0:10be2000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:0bcfb000 ph data[9]=0:bcfb000 (fff) get Phys(data[n=10+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:10bcc000 ph data[10]=0:10bcc000 (fff) get Phys(data[n=11+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:0bced000 ph data[11]=0:bced000 (fff) get Phys(data[n=12+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:0bce6000 ph data[12]=0:bce6000 (fff) get Phys(data[n=13+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:0bcdf000 ph data[13]=0:bcdf000 (fff) get Phys(data[n=14+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:0c820000 ph data[14]=0:c820000 (fff) get Phys(data[n=15+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:0bcf1000 set TERM ph data[15]=0:bcf1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd29f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd29f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:10bea000 ph data[0]=0:10bea000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:0bd03000 ph data[1]=0:bd03000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:10bd4000 ph data[2]=0:10bd4000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:0bcf5000 ph data[3]=0:bcf5000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:0bcee000 ph data[4]=0:bcee000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:0bce7000 ph data[5]=0:bce7000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:0c828000 ph data[6]=0:c828000 (fff) get Phys(data[n=7+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:0bcf9000 ph data[7]=0:bcf9000 (fff) get Phys(data[n=8+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:10bf2000 ph data[8]=0:10bf2000 (fff) get Phys(data[n=9+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:0bc8b000 ph data[9]=0:bc8b000 (fff) get Phys(data[n=10+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:0bcdc000 ph data[10]=0:bcdc000 (fff) get Phys(data[n=11+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:0bcfd000 ph data[11]=0:bcfd000 (fff) get Phys(data[n=12+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:0bcf6000 ph data[12]=0:bcf6000 (fff) get Phys(data[n=13+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:0bcef000 ph data[13]=0:bcef000 (fff) get Phys(data[n=14+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:0bcd0000 ph data[14]=0:bcd0000 (fff) get Phys(data[n=15+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:0bd01000 set TERM ph data[15]=0:bd01000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5ea4440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b484 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2970, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2a70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2a70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:0bcfa000 ph data[0]=0:bcfa000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:0bc93000 ph data[1]=0:bc93000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:0bce4000 ph data[2]=0:bce4000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:0bd05000 ph data[3]=0:bd05000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:0bcfe000 ph data[4]=0:bcfe000 (fff) get Phys(data[n=5+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:0bcf7000 ph data[5]=0:bcf7000 (fff) get Phys(data[n=6+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:0bcd8000 ph data[6]=0:bcd8000 (fff) get Phys(data[n=7+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:0bd09000 ph data[7]=0:bd09000 (fff) get Phys(data[n=8+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:0bd02000 ph data[8]=0:bd02000 (fff) get Phys(data[n=9+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:0bc9b000 ph data[9]=0:bc9b000 (fff) get Phys(data[n=10+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:0bcec000 ph data[10]=0:bcec000 (fff) get Phys(data[n=11+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:0bc8d000 ph data[11]=0:bc8d000 (fff) get Phys(data[n=12+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:0bd06000 ph data[12]=0:bd06000 (fff) get Phys(data[n=13+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:0bcff000 ph data[13]=0:bcff000 (fff) get Phys(data[n=14+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:0bce0000 ph data[14]=0:bce0000 (fff) get Phys(data[n=15+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:0bc91000 set TERM ph data[15]=0:bc91000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd29f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c59460 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2a70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c59230 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c6e000, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0bc69000 set TERM ph data[0]=0:bc69000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059b60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059b60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ba6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:10bf3000 ph data[0]=0:10bf3000 (fff) get Phys(data[n=1+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:15cfc000 ph data[1]=0:15cfc000 (fff) get Phys(data[n=2+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:02945000 ph data[2]=0:2945000 (fff) get Phys(data[n=3+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:025d6000 ph data[3]=0:25d6000 (fff) get Phys(data[n=4+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:10bd7000 ph data[4]=0:10bd7000 (fff) get Phys(data[n=5+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:108b0000 ph data[5]=0:108b0000 (fff) get Phys(data[n=6+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:10bf1000 ph data[6]=0:10bf1000 (fff) get Phys(data[n=7+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:0c81a000 ph data[7]=0:c81a000 (fff) get Phys(data[n=8+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:10bfb000 ph data[8]=0:10bfb000 (fff) get Phys(data[n=9+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:0c7f4000 ph data[9]=0:c7f4000 (fff) get Phys(data[n=10+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:0294d000 ph data[10]=0:294d000 (fff) get Phys(data[n=11+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:028b6000 ph data[11]=0:28b6000 (fff) get Phys(data[n=12+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:10bdf000 ph data[12]=0:10bdf000 (fff) get Phys(data[n=13+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:15ce0000 ph data[13]=0:15ce0000 (fff) get Phys(data[n=14+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:10bf9000 ph data[14]=0:10bf9000 (fff) get Phys(data[n=15+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:0c822000 set TERM ph data[15]=0:c822000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677e0c0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb677e0c0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059be0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059be0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677e0c0: cmd aligned b677e180, d=60 ahci_cmd_ptr 0xb677e180 AtapiDmaSetup: mode 0x0, data f6bb6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677e180) AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180 get Phys(data[0]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:10c03000 ph data[0]=0:10c03000 (fff) get Phys(data[n=1+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:025bc000 ph data[1]=0:25bc000 (fff) get Phys(data[n=2+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:10bed000 ph data[2]=0:10bed000 (fff) get Phys(data[n=3+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:028ae000 ph data[3]=0:28ae000 (fff) get Phys(data[n=4+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:10be7000 ph data[4]=0:10be7000 (fff) get Phys(data[n=5+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:15db0000 ph data[5]=0:15db0000 (fff) get Phys(data[n=6+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:10c01000 ph data[6]=0:10c01000 (fff) get Phys(data[n=7+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:02832000 ph data[7]=0:2832000 (fff) get Phys(data[n=8+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:0bccb000 ph data[8]=0:bccb000 (fff) get Phys(data[n=9+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:025b4000 ph data[9]=0:25b4000 (fff) get Phys(data[n=10+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:10bf5000 ph data[10]=0:10bf5000 (fff) get Phys(data[n=11+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:028a6000 ph data[11]=0:28a6000 (fff) get Phys(data[n=12+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:10bef000 ph data[12]=0:10bef000 (fff) get Phys(data[n=13+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:02538000 ph data[13]=0:2538000 (fff) get Phys(data[n=14+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:10c09000 ph data[14]=0:10c09000 (fff) get Phys(data[n=15+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:0282a000 set TERM ph data[15]=0:282a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677e180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb6776000 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059c60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059c60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6776000: cmd aligned b6776080, d=20 ahci_cmd_ptr 0xb6776080 AtapiDmaSetup: mode 0x0, data f6bc6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6776080) AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080 get Phys(data[0]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:0bcd3000 ph data[0]=0:bcd3000 (fff) get Phys(data[n=1+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:02844000 ph data[1]=0:2844000 (fff) get Phys(data[n=2+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:10bfd000 ph data[2]=0:10bfd000 (fff) get Phys(data[n=3+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:0277e000 ph data[3]=0:277e000 (fff) get Phys(data[n=4+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:10bf7000 ph data[4]=0:10bf7000 (fff) get Phys(data[n=5+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:02588000 ph data[5]=0:2588000 (fff) get Phys(data[n=6+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:10c11000 ph data[6]=0:10c11000 (fff) get Phys(data[n=7+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:0274a000 ph data[7]=0:274a000 (fff) get Phys(data[n=8+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:0bcdb000 ph data[8]=0:bcdb000 (fff) get Phys(data[n=9+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:0283c000 ph data[9]=0:283c000 (fff) get Phys(data[n=10+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:10c05000 ph data[10]=0:10c05000 (fff) get Phys(data[n=11+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:02856000 ph data[11]=0:2856000 (fff) get Phys(data[n=12+1000]=f6bd2000) AtapiVirtToPhysAddr_: f6bd2000 -> 00000000:10bff000 ph data[12]=0:10bff000 (fff) get Phys(data[n=13+1000]=f6bd3000) AtapiVirtToPhysAddr_: f6bd3000 -> 00000000:02598000 ph data[13]=0:2598000 (fff) get Phys(data[n=14+1000]=f6bd4000) AtapiVirtToPhysAddr_: f6bd4000 -> 00000000:0bcd1000 ph data[14]=0:bcd1000 (fff) get Phys(data[n=15+1000]=f6bd5000) AtapiVirtToPhysAddr_: f6bd5000 -> 00000000:026d2000 set TERM ph data[15]=0:26d2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6776080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ebb168, CDB 0xb5ebb198, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059ce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059ce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6bd6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6bd6000) AtapiVirtToPhysAddr_: f6bd6000 -> 00000000:0bce3000 ph data[0]=0:bce3000 (fff) get Phys(data[n=1+1000]=f6bd7000) AtapiVirtToPhysAddr_: f6bd7000 -> 00000000:02834000 ph data[1]=0:2834000 (fff) get Phys(data[n=2+1000]=f6bd8000) AtapiVirtToPhysAddr_: f6bd8000 -> 00000000:0bccd000 ph data[2]=0:bccd000 (fff) get Phys(data[n=3+1000]=f6bd9000) AtapiVirtToPhysAddr_: f6bd9000 -> 00000000:0281e000 ph data[3]=0:281e000 (fff) get Phys(data[n=4+1000]=f6bda000) AtapiVirtToPhysAddr_: f6bda000 -> 00000000:10c07000 ph data[4]=0:10c07000 (fff) get Phys(data[n=5+1000]=f6bdb000) AtapiVirtToPhysAddr_: f6bdb000 -> 00000000:02828000 ph data[5]=0:2828000 (fff) get Phys(data[n=6+1000]=f6bdc000) AtapiVirtToPhysAddr_: f6bdc000 -> 00000000:0bcd9000 ph data[6]=0:bcd9000 (fff) get Phys(data[n=7+1000]=f6bdd000) AtapiVirtToPhysAddr_: f6bdd000 -> 00000000:0268a000 ph data[7]=0:268a000 (fff) get Phys(data[n=8+1000]=f6bde000) AtapiVirtToPhysAddr_: f6bde000 -> 00000000:0242b000 ph data[8]=0:242b000 (fff) get Phys(data[n=9+1000]=f6bdf000) AtapiVirtToPhysAddr_: f6bdf000 -> 00000000:02764000 ph data[9]=0:2764000 (fff) get Phys(data[n=10+1000]=f6be0000) AtapiVirtToPhysAddr_: f6be0000 -> 00000000:0bcd5000 ph data[10]=0:bcd5000 (fff) get Phys(data[n=11+1000]=f6be1000) AtapiVirtToPhysAddr_: f6be1000 -> 00000000:0274e000 ph data[11]=0:274e000 (fff) get Phys(data[n=12+1000]=f6be2000) AtapiVirtToPhysAddr_: f6be2000 -> 00000000:025bf000 ph data[12]=0:25bf000 (fff) get Phys(data[n=13+1000]=f6be3000) AtapiVirtToPhysAddr_: f6be3000 -> 00000000:02820000 ph data[13]=0:2820000 (fff) get Phys(data[n=14+1000]=f6be4000) AtapiVirtToPhysAddr_: f6be4000 -> 00000000:025a1000 ph data[14]=0:25a1000 (fff) get Phys(data[n=15+1000]=f6be5000) AtapiVirtToPhysAddr_: f6be5000 -> 00000000:0257a000 set TERM ph data[15]=0:257a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5ebb168 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c72d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c2a000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:0260b000 ph data[0]=0:260b000 (fff) get Phys(data[n=1+1000]=f6c2b000) AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:0273c000 set TERM ph data[1]=0:273c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5e9c118 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c118, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c118 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa9e8 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058740, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x1, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5ea4440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa968 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059b60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c58d00 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c2a000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:0c816000 ph data[0]=0:c816000 (fff) get Phys(data[n=1+1000]=f6c2b000) AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:0bc9f000 set TERM ph data[1]=0:bc9f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c73230 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c6e000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0c826000 set TERM ph data[0]=0:c826000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2cf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2cf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:0c819000 ph data[0]=0:c819000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:1088a000 ph data[1]=0:1088a000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:0c80b000 ph data[2]=0:c80b000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:10954000 ph data[3]=0:10954000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:0264d000 ph data[4]=0:264d000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:028de000 ph data[5]=0:28de000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:0264f000 ph data[6]=0:264f000 (fff) get Phys(data[n=7+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:025a0000 ph data[7]=0:25a0000 (fff) get Phys(data[n=8+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:024c9000 ph data[8]=0:24c9000 (fff) get Phys(data[n=9+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:02772000 ph data[9]=0:2772000 (fff) get Phys(data[n=10+1000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:0263b000 ph data[10]=0:263b000 (fff) get Phys(data[n=11+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:02854000 ph data[11]=0:2854000 (fff) get Phys(data[n=12+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:02635000 ph data[12]=0:2635000 (fff) get Phys(data[n=13+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:024b6000 ph data[13]=0:24b6000 (fff) get Phys(data[n=14+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:025ff000 ph data[14]=0:25ff000 (fff) get Phys(data[n=15+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:0bc50000 set TERM ph data[15]=0:bc50000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9b780, CDB 0xb5e9b7b0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2d70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2d70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:02639000 ph data[0]=0:2639000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:02892000 ph data[1]=0:2892000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:02633000 ph data[2]=0:2633000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:028dc000 ph data[3]=0:28dc000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:0262d000 ph data[4]=0:262d000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:024be000 ph data[5]=0:24be000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:0263f000 ph data[6]=0:263f000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:02880000 ph data[7]=0:2880000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:02631000 ph data[8]=0:2631000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:02852000 ph data[9]=0:2852000 (fff) get Phys(data[n=10+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:0262b000 ph data[10]=0:262b000 (fff) get Phys(data[n=11+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:028d4000 ph data[11]=0:28d4000 (fff) get Phys(data[n=12+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:02475000 ph data[12]=0:2475000 (fff) get Phys(data[n=13+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:024c6000 ph data[13]=0:24c6000 (fff) get Phys(data[n=14+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:02637000 ph data[14]=0:2637000 (fff) get Phys(data[n=15+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:02838000 set TERM ph data[15]=0:2838000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e9b780 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea14e8, CDB 0xb5ea1518, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2df0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2df0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:02621000 ph data[0]=0:2621000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:028ca000 ph data[1]=0:28ca000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:02623000 ph data[2]=0:2623000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:028cc000 ph data[3]=0:28cc000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:02825000 ph data[4]=0:2825000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:024ce000 ph data[5]=0:24ce000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:0262f000 ph data[6]=0:262f000 (fff) get Phys(data[n=7+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:02440000 ph data[7]=0:2440000 (fff) get Phys(data[n=8+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:02619000 ph data[8]=0:2619000 (fff) get Phys(data[n=9+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:02452000 ph data[9]=0:2452000 (fff) get Phys(data[n=10+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:0261b000 ph data[10]=0:261b000 (fff) get Phys(data[n=11+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:024b4000 ph data[11]=0:24b4000 (fff) get Phys(data[n=12+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:02835000 ph data[12]=0:2835000 (fff) get Phys(data[n=13+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:024d6000 ph data[13]=0:24d6000 (fff) get Phys(data[n=14+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:0284f000 ph data[14]=0:284f000 (fff) get Phys(data[n=15+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:02448000 set TERM ph data[15]=0:2448000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5ea14e8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9b1c0, CDB 0xb5e9b1f0, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2e70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2e70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:02611000 ph data[0]=0:2611000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:0245a000 ph data[1]=0:245a000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:02823000 ph data[2]=0:2823000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:024bc000 ph data[3]=0:24bc000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:0282d000 ph data[4]=0:282d000 (fff) get Phys(data[n=5+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:024de000 ph data[5]=0:24de000 (fff) get Phys(data[n=6+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:10bcf000 ph data[6]=0:10bcf000 (fff) get Phys(data[n=7+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:02488000 ph data[7]=0:2488000 (fff) get Phys(data[n=8+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:02609000 ph data[8]=0:2609000 (fff) get Phys(data[n=9+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:02462000 ph data[9]=0:2462000 (fff) get Phys(data[n=10+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:0281b000 ph data[10]=0:281b000 (fff) get Phys(data[n=11+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:024c4000 ph data[11]=0:24c4000 (fff) get Phys(data[n=12+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:0bd55000 ph data[12]=0:bd55000 (fff) get Phys(data[n=13+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:024e6000 ph data[13]=0:24e6000 (fff) get Phys(data[n=14+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:0269f000 ph data[14]=0:269f000 (fff) get Phys(data[n=15+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:02490000 set TERM ph data[15]=0:2490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5e9b1c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0xb5eb9150 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677e0c0, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677e0c0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059be0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0 AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180) prd_length 0x10, flags 0x5, base 8e41180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb9150, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb9150 AtapiInterrupt: NextRequest, srb=0xb5eaefc0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6776000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059c60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000 AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080) prd_length 0x10, flags 0x5, base 8e39080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaefc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaefc0 AtapiInterrupt: NextRequest, srb=0xb5ebb168 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ebb168, CDB 0xb5ebb198, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059ce0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x10, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ebb168 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ebb168, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ebb168 AtapiInterrupt: NextRequest, srb=0xb5e9c118 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c118, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c118 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa96c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2cf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ebb168, CDB 0xb5ebb198, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c551e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe0880, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe0880, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:15d01000 ph data[0]=0:15d01000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:1087a000 ph data[1]=0:1087a000 (fff) get Phys(data[n=2+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:108b3000 ph data[2]=0:108b3000 (fff) get Phys(data[n=3+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:02564000 ph data[3]=0:2564000 (fff) get Phys(data[n=4+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:0c7fd000 ph data[4]=0:c7fd000 (fff) get Phys(data[n=5+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:1096e000 ph data[5]=0:1096e000 (fff) get Phys(data[n=6+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:108b7000 ph data[6]=0:108b7000 (fff) get Phys(data[n=7+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:02558000 ph data[7]=0:2558000 (fff) get Phys(data[n=8+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:10c19000 ph data[8]=0:10c19000 (fff) get Phys(data[n=9+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:0bd92000 ph data[9]=0:bd92000 (fff) get Phys(data[n=10+1000]=f6b8c000) AtapiVirtToPhysAddr_: f6b8c000 -> 00000000:10b7b000 ph data[10]=0:10b7b000 (fff) get Phys(data[n=11+1000]=f6b8d000) AtapiVirtToPhysAddr_: f6b8d000 -> 00000000:0256c000 ph data[11]=0:256c000 (fff) get Phys(data[n=12+1000]=f6b8e000) AtapiVirtToPhysAddr_: f6b8e000 -> 00000000:0c805000 ph data[12]=0:c805000 (fff) get Phys(data[n=13+1000]=f6b8f000) AtapiVirtToPhysAddr_: f6b8f000 -> 00000000:02576000 ph data[13]=0:2576000 (fff) get Phys(data[n=14+1000]=f6b90000) AtapiVirtToPhysAddr_: f6b90000 -> 00000000:121bf000 ph data[14]=0:121bf000 (fff) get Phys(data[n=15+1000]=f6b91000) AtapiVirtToPhysAddr_: f6b91000 -> 00000000:02560000 set TERM ph data[15]=0:2560000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5ebb168 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c551e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe0900, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe0900, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:0c801000 ph data[0]=0:c801000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:02542000 ph data[1]=0:2542000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:10b6b000 ph data[2]=0:10b6b000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:02574000 ph data[3]=0:2574000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:0c80d000 ph data[4]=0:c80d000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:0257e000 ph data[5]=0:257e000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:10b67000 ph data[6]=0:10b67000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:026a8000 ph data[7]=0:26a8000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:0c809000 ph data[8]=0:c809000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:0254a000 ph data[9]=0:254a000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:15d03000 ph data[10]=0:15d03000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:0257c000 ph data[11]=0:257c000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:026dd000 ph data[12]=0:26dd000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:02586000 ph data[13]=0:2586000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:15cdf000 ph data[14]=0:15cdf000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:026b8000 set TERM ph data[15]=0:26b8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c551e0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe0980, OrigWordsRequested 0x1f00, DevSize 0x1f IdeReadWrite (REQ): Starting sector is 38fe0980, Number of WORDS 0x1f00, DevSize 0x1f AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 3e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:02421000 ph data[0]=0:2421000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:0255a000 ph data[1]=0:255a000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:0c7f3000 ph data[2]=0:c7f3000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:026d4000 set TERM ph data[3]=0:26d4000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c59230 ** Ide: Command AtaReq 0xb6776000 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6776000: cmd aligned b6776080, d=20 ahci_cmd_ptr 0xb6776080 AtapiDmaSetup: mode 0x0, data f6c2a000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6776080) AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:029f1000 set TERM ph data[0]=0:29f1000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6776080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb677e0c0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb677e0c0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677e0c0: cmd aligned b677e180, d=60 ahci_cmd_ptr 0xb677e180 AtapiDmaSetup: mode 0x0, data f6ba6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677e180) AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180 get Phys(data[0]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:024a2000 ph data[0]=0:24a2000 (fff) get Phys(data[n=1+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:0bc83000 ph data[1]=0:bc83000 (fff) get Phys(data[n=2+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:024cc000 ph data[2]=0:24cc000 (fff) get Phys(data[n=3+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:afd45000 ph data[3]=0:afd45000 (fff) get Phys(data[n=4+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:026be000 ph data[4]=0:26be000 (fff) get Phys(data[n=5+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:026a7000 ph data[5]=0:26a7000 (fff) get Phys(data[n=6+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:10948000 ph data[6]=0:10948000 (fff) get Phys(data[n=7+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:0c811000 ph data[7]=0:c811000 (fff) get Phys(data[n=8+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:10882000 ph data[8]=0:10882000 (fff) get Phys(data[n=9+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:afd43000 ph data[9]=0:afd43000 (fff) get Phys(data[n=10+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:0286c000 ph data[10]=0:286c000 (fff) get Phys(data[n=11+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:afd4d000 ph data[11]=0:afd4d000 (fff) get Phys(data[n=12+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:02516000 ph data[12]=0:2516000 (fff) get Phys(data[n=13+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:024ff000 ph data[13]=0:24ff000 (fff) get Phys(data[n=14+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:02858000 ph data[14]=0:2858000 (fff) get Phys(data[n=15+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:afd59000 set TERM ph data[15]=0:afd59000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677e180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390599e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390599e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bb6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:028da000 ph data[0]=0:28da000 (fff) get Phys(data[n=1+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:0251b000 ph data[1]=0:251b000 (fff) get Phys(data[n=2+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:026ac000 ph data[2]=0:26ac000 (fff) get Phys(data[n=3+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:026b5000 ph data[3]=0:26b5000 (fff) get Phys(data[n=4+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:0251e000 ph data[4]=0:251e000 (fff) get Phys(data[n=5+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:0251f000 ph data[4]=0:251e000 (1fff) get Phys(data[n=5+2000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:024d0000 ph data[5]=0:24d0000 (fff) get Phys(data[n=6+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:024e1000 ph data[6]=0:24e1000 (fff) get Phys(data[n=7+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:0bd12000 ph data[7]=0:bd12000 (fff) get Phys(data[n=8+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:02523000 ph data[8]=0:2523000 (fff) get Phys(data[n=9+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:02514000 ph data[9]=0:2514000 (fff) get Phys(data[n=10+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:024fd000 ph data[10]=0:24fd000 (fff) get Phys(data[n=11+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:02526000 ph data[11]=0:2526000 (fff) get Phys(data[n=12+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:02527000 ph data[11]=0:2526000 (1fff) get Phys(data[n=12+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:024f0000 ph data[12]=0:24f0000 (fff) get Phys(data[n=13+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:02501000 set TERM ph data[13]=0:2501000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9a1f0, CDB 0xb5e9a220, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=a Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059a60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059a60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6bc6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:024ea000 ph data[0]=0:24ea000 (fff) get Phys(data[n=1+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:0252b000 ph data[1]=0:252b000 (fff) get Phys(data[n=2+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:0251c000 ph data[2]=0:251c000 (fff) get Phys(data[n=3+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:02515000 ph data[3]=0:2515000 (fff) get Phys(data[n=4+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:0252e000 ph data[4]=0:252e000 (fff) get Phys(data[n=5+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:0252f000 ph data[4]=0:252e000 (1fff) get Phys(data[n=5+2000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:024f8000 ph data[5]=0:24f8000 (fff) get Phys(data[n=6+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:02509000 ph data[6]=0:2509000 (fff) get Phys(data[n=7+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:0250a000 ph data[6]=0:2509000 (1fff) get Phys(data[n=7+2000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:02533000 ph data[7]=0:2533000 (fff) get Phys(data[n=8+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:02524000 ph data[8]=0:2524000 (fff) get Phys(data[n=9+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:0251d000 ph data[9]=0:251d000 (fff) get Phys(data[n=10+1000]=f6bd2000) AtapiVirtToPhysAddr_: f6bd2000 -> 00000000:02536000 ph data[10]=0:2536000 (fff) get Phys(data[n=11+1000]=f6bd3000) AtapiVirtToPhysAddr_: f6bd3000 -> 00000000:02537000 ph data[10]=0:2536000 (1fff) get Phys(data[n=11+2000]=f6bd4000) AtapiVirtToPhysAddr_: f6bd4000 -> 00000000:02500000 ph data[11]=0:2500000 (fff) get Phys(data[n=12+1000]=f6bd5000) AtapiVirtToPhysAddr_: f6bd5000 -> 00000000:02511000 set TERM ph data[12]=0:2511000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 11 request(s)! AtapiStartIo: next Srb b5e9a1f0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c638, CDB 0xb5e9c668, AtaReq 0xb677c090, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=b Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb677c090 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059ae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059ae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677c090: cmd aligned b677c100, d=10 ahci_cmd_ptr 0xb677c100 AtapiDmaSetup: mode 0x0, data f6bd6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677c100) AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100 get Phys(data[0]=f6bd6000) AtapiVirtToPhysAddr_: f6bd6000 -> 00000000:02512000 ph data[0]=0:2512000 (fff) get Phys(data[n=1+1000]=f6bd7000) AtapiVirtToPhysAddr_: f6bd7000 -> 00000000:0253b000 ph data[1]=0:253b000 (fff) get Phys(data[n=2+1000]=f6bd8000) AtapiVirtToPhysAddr_: f6bd8000 -> 00000000:0252c000 ph data[2]=0:252c000 (fff) get Phys(data[n=3+1000]=f6bd9000) AtapiVirtToPhysAddr_: f6bd9000 -> 00000000:02525000 ph data[3]=0:2525000 (fff) get Phys(data[n=4+1000]=f6bda000) AtapiVirtToPhysAddr_: f6bda000 -> 00000000:0253e000 ph data[4]=0:253e000 (fff) get Phys(data[n=5+1000]=f6bdb000) AtapiVirtToPhysAddr_: f6bdb000 -> 00000000:108a7000 ph data[5]=0:108a7000 (fff) get Phys(data[n=6+1000]=f6bdc000) AtapiVirtToPhysAddr_: f6bdc000 -> 00000000:02508000 ph data[6]=0:2508000 (fff) get Phys(data[n=7+1000]=f6bdd000) AtapiVirtToPhysAddr_: f6bdd000 -> 00000000:02519000 ph data[7]=0:2519000 (fff) get Phys(data[n=8+1000]=f6bde000) AtapiVirtToPhysAddr_: f6bde000 -> 00000000:0251a000 ph data[7]=0:2519000 (1fff) get Phys(data[n=8+2000]=f6bdf000) AtapiVirtToPhysAddr_: f6bdf000 -> 00000000:108a3000 ph data[8]=0:108a3000 (fff) get Phys(data[n=9+1000]=f6be0000) AtapiVirtToPhysAddr_: f6be0000 -> 00000000:02534000 ph data[9]=0:2534000 (fff) get Phys(data[n=10+1000]=f6be1000) AtapiVirtToPhysAddr_: f6be1000 -> 00000000:10b75000 ph data[10]=0:10b75000 (fff) get Phys(data[n=11+1000]=f6be2000) AtapiVirtToPhysAddr_: f6be2000 -> 00000000:02546000 ph data[11]=0:2546000 (fff) get Phys(data[n=12+1000]=f6be3000) AtapiVirtToPhysAddr_: f6be3000 -> 00000000:1089f000 ph data[12]=0:1089f000 (fff) get Phys(data[n=13+1000]=f6be4000) AtapiVirtToPhysAddr_: f6be4000 -> 00000000:02510000 ph data[13]=0:2510000 (fff) get Phys(data[n=14+1000]=f6be5000) AtapiVirtToPhysAddr_: f6be5000 -> 00000000:02521000 set TERM ph data[14]=0:2521000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677c100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 12 request(s)! AtapiStartIo: next Srb b5e9c638 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5e9b780 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9b780, CDB 0xb5e9b7b0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=b Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c73748 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2d70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9b780 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9b780, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9b780 AtapiInterrupt: NextRequest, srb=0xb5ea14e8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea14e8, CDB 0xb5ea1518, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=a Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c4989c ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2df0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea14e8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea14e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea14e8 AtapiInterrupt: NextRequest, srb=0xb5e9b1c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9b1c0, CDB 0xb5e9b1f0, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700372c ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2e70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x10, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9b1c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea14e8, CDB 0xb5ea1518, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b32000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b3a000) AtapiVirtToPhysAddr_: f6b3a000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b3b000) AtapiVirtToPhysAddr_: f6b3b000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b3c000) AtapiVirtToPhysAddr_: f6b3c000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b3d000) AtapiVirtToPhysAddr_: f6b3d000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b3e000) AtapiVirtToPhysAddr_: f6b3e000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b3f000) AtapiVirtToPhysAddr_: f6b3f000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6b40000) AtapiVirtToPhysAddr_: f6b40000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6b41000) AtapiVirtToPhysAddr_: f6b41000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5ea14e8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9b780, CDB 0xb5e9b7b0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=a Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b42000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b42000) AtapiVirtToPhysAddr_: f6b42000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6b43000) AtapiVirtToPhysAddr_: f6b43000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6b44000) AtapiVirtToPhysAddr_: f6b44000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6b45000) AtapiVirtToPhysAddr_: f6b45000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6b46000) AtapiVirtToPhysAddr_: f6b46000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6b47000) AtapiVirtToPhysAddr_: f6b47000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6b48000) AtapiVirtToPhysAddr_: f6b48000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6b49000) AtapiVirtToPhysAddr_: f6b49000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6b4a000) AtapiVirtToPhysAddr_: f6b4a000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6b4b000) AtapiVirtToPhysAddr_: f6b4b000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 11 request(s)! AtapiStartIo: next Srb b5e9b780 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=b Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b52000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 12 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=c Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b62000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 13 request(s)! AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9b1c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9b1c0 AtapiInterrupt: NextRequest, srb=0xb5ebb168 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ebb168, CDB 0xb5ebb198, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=c Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe0880, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ebb168 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9b1c0, CDB 0xb5e9b1f0, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=c Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9ad00 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:1096b000 ph data[0]=0:1096b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10b24000 set TERM ph data[1]=0:10b24000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 13 request(s)! AtapiStartIo: next Srb b5e9b1c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ebb168, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ebb168 AtapiInterrupt: NextRequest, srb=0xb5eaefc0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=c Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe0900, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaefc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaefc0 AtapiInterrupt: NextRequest, srb=0xb5ea14e8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea14e8, CDB 0xb5ea1518, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=b Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x9, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea14e8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea14e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea14e8 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=a Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0xb5e94f60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=9 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x9, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0xb5e9b780 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9b780, CDB 0xb5e9b7b0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=8 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9b780 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9b780, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9b780 AtapiInterrupt: NextRequest, srb=0xb5eb9150 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe0980, Count 0x1f(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x4, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eb9150 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1f00, WordsLeft 1f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3e00, full size 3e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eb9150, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eb9150 AtapiInterrupt: NextRequest, srb=0xb5e9b1c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9b1c0, CDB 0xb5e9b1f0, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x2, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9b1c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9b1c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9b1c0 AtapiInterrupt: NextRequest, srb=0xb5ea4440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea4440, CDB 0xb5ea4470, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb6776000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000 AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080) prd_length 0x1, flags 0x5, base 8e39080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea4440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea4440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea4440 AtapiInterrupt: NextRequest, srb=0xb5e9c118 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb677e0c0, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa960 ** Ide: Command AtaReq 0xb677e0c0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059960, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0 AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180) prd_length 0x10, flags 0x5, base 8e41180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c58d00 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:028c3000 ph data[0]=0:28c3000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10bfc000 set TERM ph data[1]=0:10bfc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea14e8, CDB 0xb5ea1518, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b230 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6c2a000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:10893000 set TERM ph data[0]=0:10893000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5ea14e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c118, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c118 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390599e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xe, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5e9a1f0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9a1f0, CDB 0xb5e9a220, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059a60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0xd, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9a1f0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9a1f0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9a1f0 AtapiInterrupt: NextRequest, srb=0xb5e9c638 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c638, CDB 0xb5e9c668, AtaReq 0xb677c090, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677c090 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059ae0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090 AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100) prd_length 0xf, flags 0x5, base 8e3f100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c638 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c638, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c638 AtapiInterrupt: NextRequest, srb=0xb5ea14e8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ea14e8, CDB 0xb5ea1518, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x1, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ea14e8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ea14e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ea14e8 AtapiInterrupt: NextRequest, srb=0xb5ef24e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ef24e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ef24e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ef24e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eed388 TopLevel (3), AtaReq 0xb677f0d8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c551e0 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe0880, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe0880, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6b82000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:0260b000 ph data[0]=0:260b000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:0273c000 ph data[1]=0:273c000 (fff) get Phys(data[n=2+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:02435000 ph data[2]=0:2435000 (fff) get Phys(data[n=3+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:02746000 ph data[3]=0:2746000 (fff) get Phys(data[n=4+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:025b7000 ph data[4]=0:25b7000 (fff) get Phys(data[n=5+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:02818000 ph data[5]=0:2818000 (fff) get Phys(data[n=6+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:02599000 ph data[6]=0:2599000 (fff) get Phys(data[n=7+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:02572000 ph data[7]=0:2572000 (fff) get Phys(data[n=8+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:0c803000 ph data[8]=0:c803000 (fff) get Phys(data[n=9+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:026e4000 ph data[9]=0:26e4000 (fff) get Phys(data[n=10+1000]=f6b8c000) AtapiVirtToPhysAddr_: f6b8c000 -> 00000000:02625000 ph data[10]=0:2625000 (fff) get Phys(data[n=11+1000]=f6b8d000) AtapiVirtToPhysAddr_: f6b8d000 -> 00000000:0259e000 ph data[11]=0:259e000 (fff) get Phys(data[n=12+1000]=f6b8e000) AtapiVirtToPhysAddr_: f6b8e000 -> 00000000:025a7000 ph data[12]=0:25a7000 (fff) get Phys(data[n=13+1000]=f6b8f000) AtapiVirtToPhysAddr_: f6b8f000 -> 00000000:02810000 ph data[13]=0:2810000 (fff) get Phys(data[n=14+1000]=f6b90000) AtapiVirtToPhysAddr_: f6b90000 -> 00000000:02549000 ph data[14]=0:2549000 (fff) get Phys(data[n=15+1000]=f6b91000) AtapiVirtToPhysAddr_: f6b91000 -> 00000000:0256a000 set TERM ph data[15]=0:256a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe0880, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x10, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c551e0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe0900, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe0900, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:0c7fb000 ph data[0]=0:c7fb000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:026dc000 ph data[1]=0:26dc000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:0261d000 ph data[2]=0:261d000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:02596000 ph data[3]=0:2596000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:0243f000 ph data[4]=0:243f000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:02738000 ph data[5]=0:2738000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:02589000 ph data[6]=0:2589000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:02562000 ph data[7]=0:2562000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:0c7f3000 ph data[8]=0:c7f3000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:026d4000 ph data[9]=0:26d4000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:026e5000 ph data[10]=0:26e5000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:0258e000 ph data[11]=0:258e000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:15da7000 ph data[12]=0:15da7000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:02710000 ph data[13]=0:2710000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:02421000 ph data[14]=0:2421000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:0255a000 set TERM ph data[15]=0:255a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb677c090, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c551e0 ** Ide: Command AtaReq 0xb677c090 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe0980, OrigWordsRequested 0x1f00, DevSize 0x1f IdeReadWrite (REQ): Starting sector is 38fe0980, Number of WORDS 0x1f00, DevSize 0x1f AtaReq 0xb677c090: cmd aligned b677c100, d=10 ahci_cmd_ptr 0xb677c100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 3e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677c100) AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:15d03000 ph data[0]=0:15d03000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:0257c000 ph data[1]=0:257c000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:026dd000 ph data[2]=0:26dd000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:02586000 set TERM ph data[3]=0:2586000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677c100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5e9c118 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c550b4 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe0900, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x10, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c118, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c118 AtapiInterrupt: NextRequest, srb=0xb5eaefc0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb677c090, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c5933c ** Ide: Command AtaReq 0xb677c090 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe0980, Count 0x1f(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090 AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100) prd_length 0x4, flags 0x5, base 8e3f100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1f00, WordsLeft 1f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3e00, full size 3e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaefc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaefc0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e9c118 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c5560c ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe0880, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fe0880, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:1093f000 ph data[0]=0:1093f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10b30000 set TERM ph data[1]=0:10b30000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe0880, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c118, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c118 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e9c118 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c55230 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff8ab0, OrigWordsRequested 0x5d00, DevSize 0x5d IdeReadWrite (REQ): Starting sector is 38ff8ab0, Number of WORDS 0x5d00, DevSize 0x5d AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6b9a000, count ba00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:0bcaa000 ph data[0]=0:bcaa000 (fff) get Phys(data[n=1+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:02663000 ph data[1]=0:2663000 (fff) get Phys(data[n=2+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:1089c000 ph data[2]=0:1089c000 (fff) get Phys(data[n=3+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:02685000 ph data[3]=0:2685000 (fff) get Phys(data[n=4+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:15cde000 ph data[4]=0:15cde000 (fff) get Phys(data[n=5+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:02677000 ph data[5]=0:2677000 (fff) get Phys(data[n=6+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:0bd08000 ph data[6]=0:bd08000 (fff) get Phys(data[n=7+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:02661000 ph data[7]=0:2661000 (fff) get Phys(data[n=8+1000]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:0bcb2000 ph data[8]=0:bcb2000 (fff) get Phys(data[n=9+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:0265b000 ph data[9]=0:265b000 (fff) get Phys(data[n=10+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:108a4000 ph data[10]=0:108a4000 (fff) get Phys(data[n=11+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:0267d000 set TERM ph data[11]=0:267d000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff8ab0, Count 0x5d(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0xc, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb677c090, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c59230 ** Ide: Command AtaReq 0xb677c090 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb677c090: cmd aligned b677c100, d=10 ahci_cmd_ptr 0xb677c100 AtapiDmaSetup: mode 0x0, data f6c6e000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677c100) AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100 get Phys(data[0]=f6c6e000) AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0286b000 set TERM ph data[0]=0:286b000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677c100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93230 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:10a38000 set TERM ph data[0]=0:10a38000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ebb168, CDB 0xb5ebb198, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feef70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feef70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:10af5000 ph data[0]=0:10af5000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:10ade000 ph data[1]=0:10ade000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:10ad7000 ph data[2]=0:10ad7000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:10ad0000 ph data[3]=0:10ad0000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:10a81000 ph data[4]=0:10a81000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:10a7a000 ph data[5]=0:10a7a000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:10adb000 ph data[6]=0:10adb000 (fff) get Phys(data[n=7+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:109ec000 ph data[7]=0:109ec000 (fff) get Phys(data[n=8+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:10aed000 ph data[8]=0:10aed000 (fff) get Phys(data[n=9+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:10ad6000 ph data[9]=0:10ad6000 (fff) get Phys(data[n=10+1000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:10acf000 ph data[10]=0:10acf000 (fff) get Phys(data[n=11+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:10ac8000 ph data[11]=0:10ac8000 (fff) get Phys(data[n=12+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:10af9000 ph data[12]=0:10af9000 (fff) get Phys(data[n=13+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:10af2000 ph data[13]=0:10af2000 (fff) get Phys(data[n=14+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:10ad3000 ph data[14]=0:10ad3000 (fff) get Phys(data[n=15+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:109e4000 set TERM ph data[15]=0:109e4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ebb168 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feeff0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feeff0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:10ae5000 ph data[0]=0:10ae5000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:10ace000 ph data[1]=0:10ace000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:10ac7000 ph data[2]=0:10ac7000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:10ac0000 ph data[3]=0:10ac0000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:10af1000 ph data[4]=0:10af1000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:10aea000 ph data[5]=0:10aea000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:10acb000 ph data[6]=0:10acb000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:109dc000 ph data[7]=0:109dc000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:10add000 ph data[8]=0:10add000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:10ac6000 ph data[9]=0:10ac6000 (fff) get Phys(data[n=10+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:10abf000 ph data[10]=0:10abf000 (fff) get Phys(data[n=11+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:10ab8000 ph data[11]=0:10ab8000 (fff) get Phys(data[n=12+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:10ae9000 ph data[12]=0:10ae9000 (fff) get Phys(data[n=13+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:10ae2000 ph data[13]=0:10ae2000 (fff) get Phys(data[n=14+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:10ac3000 ph data[14]=0:10ac3000 (fff) get Phys(data[n=15+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:109d4000 set TERM ph data[15]=0:109d4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb677e0c0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb677e0c0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef070, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef070, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677e0c0: cmd aligned b677e180, d=60 ahci_cmd_ptr 0xb677e180 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677e180) AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:10ad5000 ph data[0]=0:10ad5000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:10abe000 ph data[1]=0:10abe000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:109f7000 ph data[2]=0:109f7000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:109f0000 ph data[3]=0:109f0000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:10ae1000 ph data[4]=0:10ae1000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:10ada000 ph data[5]=0:10ada000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:10abb000 ph data[6]=0:10abb000 (fff) get Phys(data[n=7+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:109cc000 ph data[7]=0:109cc000 (fff) get Phys(data[n=8+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:10acd000 ph data[8]=0:10acd000 (fff) get Phys(data[n=9+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:109f6000 ph data[9]=0:109f6000 (fff) get Phys(data[n=10+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:109ef000 ph data[10]=0:109ef000 (fff) get Phys(data[n=11+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:109e8000 ph data[11]=0:109e8000 (fff) get Phys(data[n=12+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:10ad9000 ph data[12]=0:10ad9000 (fff) get Phys(data[n=13+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:10ad2000 ph data[13]=0:10ad2000 (fff) get Phys(data[n=14+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:109f3000 ph data[14]=0:109f3000 (fff) get Phys(data[n=15+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:109c4000 set TERM ph data[15]=0:109c4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677e180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e91510, CDB 0xb5e91540, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b600 ** Ide: Command AtaReq 0xb6776000 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef0f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef0f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6776000: cmd aligned b6776080, d=20 ahci_cmd_ptr 0xb6776080 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6776080) AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:10ac5000 ph data[0]=0:10ac5000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:109ee000 ph data[1]=0:109ee000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:109e7000 ph data[2]=0:109e7000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:109e0000 ph data[3]=0:109e0000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:10ad1000 ph data[4]=0:10ad1000 (fff) get Phys(data[n=5+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:10aca000 ph data[5]=0:10aca000 (fff) get Phys(data[n=6+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:109eb000 ph data[6]=0:109eb000 (fff) get Phys(data[n=7+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:109bc000 ph data[7]=0:109bc000 (fff) get Phys(data[n=8+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:10abd000 ph data[8]=0:10abd000 (fff) get Phys(data[n=9+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:109e6000 ph data[9]=0:109e6000 (fff) get Phys(data[n=10+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:109df000 ph data[10]=0:109df000 (fff) get Phys(data[n=11+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:109d8000 ph data[11]=0:109d8000 (fff) get Phys(data[n=12+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:10ac9000 ph data[12]=0:10ac9000 (fff) get Phys(data[n=13+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:10ac2000 ph data[13]=0:10ac2000 (fff) get Phys(data[n=14+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:109e3000 ph data[14]=0:109e3000 (fff) get Phys(data[n=15+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:10a34000 set TERM ph data[15]=0:10a34000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6776080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e91510 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5d00, WordsLeft 5d00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ba00, full size ba00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c118, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c118 AtapiInterrupt: NextRequest, srb=0xb5ebb168 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ebb168, CDB 0xb5ebb198, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feef70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x10, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ebb168 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c5560c ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff8ab0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38ff8ab0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c2a000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:108a6000 ph data[0]=0:108a6000 (fff) get Phys(data[n=1+1000]=f6c2b000) AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:10aef000 set TERM ph data[1]=0:10aef000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ebb168, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ebb168 AtapiInterrupt: NextRequest, srb=0xb5e94f60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feeff0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb677e0c0, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677e0c0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef070, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0 AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180) prd_length 0x10, flags 0x5, base 8e41180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5eed388 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8 AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180) prd_length 0x1, flags 0x5, base 8e42180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eed388 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eed388, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eed388 AtapiInterrupt: NextRequest, srb=0xb5eaefc0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaefc0, CDB 0xb5eaeff0, AtaReq 0xb677c090, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb677c090 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058720, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090 AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100) prd_length 0x1, flags 0x5, base 8e3f100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaefc0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaefc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaefc0 AtapiInterrupt: NextRequest, srb=0xb5e9c118 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa930 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff8ab0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c118, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c118 AtapiInterrupt: NextRequest, srb=0xb5e91510 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e91510, CDB 0xb5e91540, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa8e8 ** Ide: Command AtaReq 0xb6776000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef0f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000 AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080) prd_length 0x10, flags 0x5, base 8e39080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e91510 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e91510, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e91510 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 DHCPCSVC: Adapter Name: [{05b4d82e-da93-4b31-a2d6-eb7925677cfd}] (dynamic) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb6776000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e9c118 TopLevel (3), AtaReq 0xb6776000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb6776000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6776000: cmd aligned b6776080, d=20 ahci_cmd_ptr 0xb6776080 AtapiDmaSetup: mode 0x0, data f6b96000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6776080) AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080 get Phys(data[0]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:10a29000 ph data[0]=0:10a29000 (fff) get Phys(data[n=1+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:10a22000 ph data[1]=0:10a22000 (fff) get Phys(data[n=2+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:109fb000 ph data[2]=0:109fb000 (fff) get Phys(data[n=3+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:108bc000 ph data[3]=0:108bc000 (fff) get Phys(data[n=4+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:10a15000 ph data[4]=0:10a15000 (fff) get Phys(data[n=5+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:108e6000 ph data[5]=0:108e6000 (fff) get Phys(data[n=6+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:109ff000 ph data[6]=0:109ff000 (fff) get Phys(data[n=7+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:109f8000 ph data[7]=0:109f8000 (fff) get Phys(data[n=8+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:10a21000 ph data[8]=0:10a21000 (fff) get Phys(data[n=9+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:10a1a000 ph data[9]=0:10a1a000 (fff) get Phys(data[n=10+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:108f3000 ph data[10]=0:108f3000 (fff) get Phys(data[n=11+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:10934000 ph data[11]=0:10934000 (fff) get Phys(data[n=12+1000]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:10a0d000 ph data[12]=0:10a0d000 (fff) get Phys(data[n=13+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:108de000 ph data[13]=0:108de000 (fff) get Phys(data[n=14+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:108f7000 ph data[14]=0:108f7000 (fff) get Phys(data[n=15+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:108f0000 set TERM ph data[15]=0:108f0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6776080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059760, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000 AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080) prd_length 0x10, flags 0x5, base 8e39080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb677f0d8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb677f0d8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390597e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390597e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677f0d8: cmd aligned b677f180, d=48 ahci_cmd_ptr 0xb677f180 AtapiDmaSetup: mode 0x0, data f6ba6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677f180) AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180 get Phys(data[0]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:10a19000 ph data[0]=0:10a19000 (fff) get Phys(data[n=1+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:10a12000 ph data[1]=0:10a12000 (fff) get Phys(data[n=2+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:108eb000 ph data[2]=0:108eb000 (fff) get Phys(data[n=3+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:1092c000 ph data[3]=0:1092c000 (fff) get Phys(data[n=4+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:10a05000 ph data[4]=0:10a05000 (fff) get Phys(data[n=5+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:108d6000 ph data[5]=0:108d6000 (fff) get Phys(data[n=6+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:108ef000 ph data[6]=0:108ef000 (fff) get Phys(data[n=7+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:108e8000 ph data[7]=0:108e8000 (fff) get Phys(data[n=8+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:10a11000 ph data[8]=0:10a11000 (fff) get Phys(data[n=9+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:10a0a000 ph data[9]=0:10a0a000 (fff) get Phys(data[n=10+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:108e3000 ph data[10]=0:108e3000 (fff) get Phys(data[n=11+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:10924000 ph data[11]=0:10924000 (fff) get Phys(data[n=12+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:109fd000 ph data[12]=0:109fd000 (fff) get Phys(data[n=13+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:108ce000 ph data[13]=0:108ce000 (fff) get Phys(data[n=14+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:108e7000 ph data[14]=0:108e7000 (fff) get Phys(data[n=15+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:108e0000 set TERM ph data[15]=0:108e0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677f180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb677c090, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93600 ** Ide: Command AtaReq 0xb677c090 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sectoTopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7c250, CDB 0xb5e7c280, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd5230 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc06d0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc06d0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:11b1f000 ph data[0]=0:11b1f000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:11b20000 ph data[0]=0:11b1f000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:11b59000 ph data[1]=0:11b59000 (fff) get Phys(data[n=2+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:11b32000 ph data[2]=0:11b32000 (fff) get Phys(data[n=3+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:11b4b000 ph data[3]=0:11b4b000 (fff) get Phys(data[n=4+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:11a64000 ph data[4]=0:11a64000 (fff) get Phys(data[n=5+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:11a25000 ph data[5]=0:11a25000 (fff) get Phys(data[n=6+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:11a7e000 ph data[6]=0:11a7e000 (fff) get Phys(data[n=7+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:11b17000 ph data[7]=0:11b17000 (fff) get Phys(data[n=8+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:11a90000 ph data[8]=0:11a90000 (fff) get Phys(data[n=9+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:11b51000 ph data[9]=0:11b51000 (fff) get Phys(data[n=10+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:11b2a000 ph data[10]=0:11b2a000 (fff) get Phys(data[n=11+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:11b43000 ph data[11]=0:11b43000 (fff) get Phys(data[n=12+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:11a5c000 ph data[12]=0:11a5c000 (fff) get Phys(data[n=13+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:11a1d000 ph data[13]=0:11a1d000 (fff) get Phys(data[n=14+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:11a76000 set TERM ph data[14]=0:11a76000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e7c250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0xb5e7d250 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7d250, CDB 0xb5e7d280, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c459b8 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd4d30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0xe, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7d250 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7d250, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7d250 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=7 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c456c8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6784150, SCmd 0x2a UniataNeedQueueing: qd=6 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77ad984 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x9, flags 0x45, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e9c118 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e9c118, CDB 0xb5e9c148, AtaReq 0xb6785168, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c45710 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x9, flags 0x45, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e9c118 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e9c118, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e9c118 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c45ad8 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 (base/services/umpnpmgr/umpnpmgr.c:3863) Installing: ACPI\PNP0C09\1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e91688 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e91688, CDB 0xb5e916b8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c45870 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd4e30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e91688 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e91688, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e91688 AtapiInterrupt: NextRequest, srb=0xb5e7d430 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7d430, CDB 0xb5e7d460, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44fcc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd4db0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7d430 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7d430, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7d430 AtapiInterrupt: NextRequest, srb=0xb5e7c250 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7c250, CDB 0xb5e7c280, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44e64 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc06d0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0xf, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7c250 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7c250, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7c250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b174 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c2a000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:11a3a000 ph data[0]=0:11a3a000 (fff) get Phys(data[n=1+1000]=f6c2b000) AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:10963000 set TERM ph data[1]=0:10963000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x2, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9ad00 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c2a000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:1089a000 ph data[0]=0:1089a000 (fff) get Phys(data[n=1+1000]=f6c2b000) AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:1093b000 set TERM ph data[1]=0:1093b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x2, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93230 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c2a000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:11a62000 set TERM ph data[0]=0:11a62000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x1, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c93230 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c2a000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:11a13000 set TERM ph data[0]=0:11a13000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x1, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b174 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c2a000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:121fc000 ph data[0]=0:121fc000 (fff) get Phys(data[n=1+1000]=f6c2b000) AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:121dd000 set TERM ph data[1]=0:121dd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x2, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd560c ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc06d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fc06d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:10a54000 ph data[0]=0:10a54000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10955000 set TERM ph data[1]=0:10955000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc06d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x2, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960bc60, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 3960bc60, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c2a000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c2a000) AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:12866000 set TERM ph data[0]=0:12866000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bc60, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x1, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9ad00 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:12106000 ph data[0]=0:12106000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:12847000 set TERM ph data[1]=0:12847000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7d250, CDB 0xb5e7d280, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7d250 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e91688, CDB 0xb5e916b8, AtaReq 0xb6785168, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e91688 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6784150, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6784150 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6784150, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa9e8 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x9, flags 0x45, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e91688 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e91688, CDB 0xb5e916b8, AtaReq 0xb6785168, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9aec8 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x9, flags 0x45, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e91688 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e91688, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e91688 AtapiInterrupt: NextRequest, srb=0xb5e94f60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44d7c ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e91688, CDB 0xb5e916b8, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44c68 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:12207000 ph data[0]=0:12207000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10a10000 set TERM ph data[1]=0:10a10000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e91688 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0xb5e7d250 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7d250, CDB 0xb5e7d280, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44b6c ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x9, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7d250 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7d250, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7d250 AtapiInterrupt: NextRequest, srb=0xb5e91688 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e91688, CDB 0xb5e916b8, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd5798 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x2, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e91688 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b230 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c92000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:10b69000 set TERM ph data[0]=0:10b69000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e91688, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e91688 AtapiInterrupt: NextRequest, srb=0xb5e94f60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x1, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e94f60 TopLevel (3), AtaReq 0xb6785168 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44c68 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4170, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4170, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:12324000 ph data[0]=0:12324000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:109d5000 set TERM ph data[1]=0:109d5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4170, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x2, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e94f60 TopLevel (3), AtaReq 0xb6785168 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44c68 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:1231c000 ph data[0]=0:1231c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:12345000 set TERM ph data[1]=0:12345000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x2, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e94f60 TopLevel (3), AtaReq 0xb6785168 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44c68 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4170, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4170, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11ae4000 ph data[0]=0:11ae4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:11ae5000 set TERM ph data[0]=0:11ae4000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4170, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x1, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e94f60 TopLevel (3), AtaReq 0xb6785168 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b693bc ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb5070, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb5070, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:10ac1000 ph data[0]=0:10ac1000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:11a1a000 ph data[1]=0:11a1a000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:12103000 ph data[2]=0:12103000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:12fd4000 ph data[3]=0:12fd4000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:1095d000 ph data[4]=0:1095d000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:11b0e000 ph data[5]=0:11b0e000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:10957000 ph data[6]=0:10957000 (fff) get Phys(data[n=7+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:10968000 ph data[7]=0:10968000 (fff) get Phys(data[n=8+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:02829000 ph data[8]=0:2829000 (fff) get Phys(data[n=9+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:11a62000 ph data[9]=0:11a62000 (fff) get Phys(data[n=10+1000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:120fb000 ph data[10]=0:120fb000 (fff) get Phys(data[n=11+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:12fdc000 ph data[11]=0:12fdc000 (fff) get Phys(data[n=12+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:120fd000 ph data[12]=0:120fd000 (fff) get Phys(data[n=13+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:10b36000 ph data[13]=0:10b36000 (fff) get Phys(data[n=14+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:10887000 ph data[14]=0:10887000 (fff) get Phys(data[n=15+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:10970000 set TERM ph data[15]=0:10970000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb5070, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x10, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b693bc ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb50f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb50f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:10889000 ph data[0]=0:10889000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:10942000 ph data[1]=0:10942000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:120f3000 ph data[2]=0:120f3000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:12fe4000 ph data[3]=0:12fe4000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:120f5000 ph data[4]=0:120f5000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:10b2e000 ph data[5]=0:10b2e000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:1094f000 ph data[6]=0:1094f000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:10878000 ph data[7]=0:10878000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:12109000 ph data[8]=0:12109000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:10b5a000 ph data[9]=0:10b5a000 (fff) get Phys(data[n=10+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:120eb000 ph data[10]=0:120eb000 (fff) get Phys(data[n=11+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:12fec000 ph data[11]=0:12fec000 (fff) get Phys(data[n=12+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:120ed000 ph data[12]=0:120ed000 (fff) get Phys(data[n=13+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:10b1e000 ph data[13]=0:10b1e000 (fff) get Phys(data[n=14+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:10947000 ph data[14]=0:10947000 (fff) get Phys(data[n=15+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:10b40000 set TERM ph data[15]=0:10b40000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b693bc ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb5170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb5170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:12101000 ph data[0]=0:12101000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:10b52000 ph data[1]=0:10b52000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:120e3000 ph data[2]=0:120e3000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:11a8c000 ph data[3]=0:11a8c000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:120e5000 ph data[4]=0:120e5000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:10b16000 ph data[5]=0:10b16000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:10b27000 ph data[6]=0:10b27000 (fff) get Phys(data[n=7+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:10b38000 ph data[7]=0:10b38000 (fff) get Phys(data[n=8+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:120f9000 ph data[8]=0:120f9000 (fff) get Phys(data[n=9+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:10b4a000 ph data[9]=0:10b4a000 (fff) get Phys(data[n=10+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:137eb000 ph data[10]=0:137eb000 (fff) get Phys(data[n=11+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:0bd04000 ph data[11]=0:bd04000 (fff) get Phys(data[n=12+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:137ed000 ph data[12]=0:137ed000 (fff) get Phys(data[n=13+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:10b06000 ph data[13]=0:10b06000 (fff) get Phys(data[n=14+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:10aff000 ph data[14]=0:10aff000 (fff) get Phys(data[n=15+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:10b28000 set TERM ph data[15]=0:10b28000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b693bc ** Ide: Command AtaReq 0xb6784150 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb51f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb51f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:120f1000 ph data[0]=0:120f1000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:10b42000 ph data[1]=0:10b42000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:137e3000 ph data[2]=0:137e3000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:10b14000 ph data[3]=0:10b14000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:137e5000 ph data[4]=0:137e5000 (fff) get Phys(data[n=5+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:10a76000 ph data[5]=0:10a76000 (fff) get Phys(data[n=6+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:120e7000 ph data[6]=0:120e7000 (fff) get Phys(data[n=7+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:10b18000 ph data[7]=0:10b18000 (fff) get Phys(data[n=8+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:120e9000 ph data[8]=0:120e9000 (fff) get Phys(data[n=9+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:10b3a000 ph data[9]=0:10b3a000 (fff) get Phys(data[n=10+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:137db000 ph data[10]=0:137db000 (fff) get Phys(data[n=11+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:10b0c000 ph data[11]=0:10b0c000 (fff) get Phys(data[n=12+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:137dd000 ph data[12]=0:137dd000 (fff) get Phys(data[n=13+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:137ce000 ph data[13]=0:137ce000 (fff) get Phys(data[n=14+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:120df000 ph data[14]=0:120df000 (fff) get Phys(data[n=15+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:10b08000 set TERM ph data[15]=0:10b08000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7d250, CDB 0xb5e7d280, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c45230 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc1f80, OrigWordsRequested 0x8400, DevSize 0x84 IdeReadWrite (REQ): Starting sector is 38fc1f80, Number of WORDS 0x8400, DevSize 0x84 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6b48000, count 10800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6b48000) AtapiVirtToPhysAddr_: f6b48000 -> 00000000:137d3000 ph data[0]=0:137d3000 (fff) get Phys(data[n=1+1000]=f6b49000) AtapiVirtToPhysAddr_: f6b49000 -> 00000000:10a74000 ph data[1]=0:10a74000 (fff) get Phys(data[n=2+1000]=f6b4a000) AtapiVirtToPhysAddr_: f6b4a000 -> 00000000:137d5000 ph data[2]=0:137d5000 (fff) get Phys(data[n=3+1000]=f6b4b000) AtapiVirtToPhysAddr_: f6b4b000 -> 00000000:137c6000 ph data[3]=0:137c6000 (fff) get Phys(data[n=4+1000]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:137e7000 ph data[4]=0:137e7000 (fff) get Phys(data[n=5+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:137d8000 ph data[5]=0:137d8000 (fff) get Phys(data[n=6+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:137e9000 ph data[6]=0:137e9000 (fff) get Phys(data[n=7+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:11a3a000 ph data[7]=0:11a3a000 (fff) get Phys(data[n=8+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:137cb000 ph data[8]=0:137cb000 (fff) get Phys(data[n=9+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:10a6c000 ph data[9]=0:10a6c000 (fff) get Phys(data[n=10+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:137cd000 ph data[10]=0:137cd000 (fff) get Phys(data[n=11+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:137be000 ph data[11]=0:137be000 (fff) get Phys(data[n=12+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:137df000 ph data[12]=0:137df000 (fff) get Phys(data[n=13+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:137d0000 ph data[13]=0:137d0000 (fff) get Phys(data[n=14+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:137e1000 ph data[14]=0:137e1000 (fff) get Phys(data[n=15+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:137e2000 ph data[14]=0:137e1000 (1fff) get Phys(data[n=15+2000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:137c3000 set TERM ph data[15]=0:137c3000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e7d250 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaeac8, CDB 0xb5eaeaf8, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5eaeac8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eca510, CDB 0xb5eca540, AtaReq 0xb677a060, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5eca510 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eca4c8, CDB 0xb5eca4f8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5eca4c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ecffc0, CDB 0xb5ecfff0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff250, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fff250, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b22000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:13793000 ph data[0]=0:13793000 (fff) get Phys(data[n=1+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:1379c000 ph data[1]=0:1379c000 (fff) get Phys(data[n=2+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:13795000 ph data[2]=0:13795000 (fff) get Phys(data[n=3+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:13786000 ph data[3]=0:13786000 (fff) get Phys(data[n=4+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:137a7000 ph data[4]=0:137a7000 (fff) get Phys(data[n=5+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:13798000 ph data[5]=0:13798000 (fff) get Phys(data[n=6+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:137a9000 ph data[6]=0:137a9000 (fff) get Phys(data[n=7+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:137a2000 ph data[7]=0:137a2000 (fff) get Phys(data[n=8+1000]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:1378b000 ph data[8]=0:1378b000 (fff) get Phys(data[n=9+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:13794000 ph data[9]=0:13794000 (fff) get Phys(data[n=10+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:1378d000 ph data[10]=0:1378d000 (fff) get Phys(data[n=11+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:1377e000 ph data[11]=0:1377e000 (fff) get Phys(data[n=12+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:1379f000 ph data[12]=0:1379f000 (fff) get Phys(data[n=13+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:13790000 ph data[13]=0:13790000 (fff) get Phys(data[n=14+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:137a1000 ph data[14]=0:137a1000 (fff) get Phys(data[n=15+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:1379a000 set TERM ph data[15]=0:1379a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5ecffc0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b038 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb50f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b1e0 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff2d0, OrigWordsRequested 0x3e00, DevSize 0x3e IdeReadWrite (REQ): Starting sector is 38fff2d0, Number of WORDS 0x3e00, DevSize 0x3e AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6b32000, count 7c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:13783000 ph data[0]=0:13783000 (fff) get Phys(data[n=1+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:1378c000 ph data[1]=0:1378c000 (fff) get Phys(data[n=2+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:13785000 ph data[2]=0:13785000 (fff) get Phys(data[n=3+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:13776000 ph data[3]=0:13776000 (fff) get Phys(data[n=4+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:13797000 ph data[4]=0:13797000 (fff) get Phys(data[n=5+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:13788000 ph data[5]=0:13788000 (fff) get Phys(data[n=6+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:13799000 ph data[6]=0:13799000 (fff) get Phys(data[n=7+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:13792000 set TERM ph data[7]=0:13792000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb5170, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb51f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x10, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e7d250 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7d250, CDB 0xb5e7d280, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc1f80, Count 0x84(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x10, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7d250 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b693bc ** Ide: Command AtaReq 0xb6784150 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb5270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb5270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:11aeb000 ph data[0]=0:11aeb000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:11aec000 ph data[0]=0:11aeb000 (1fff) get Phys(data[n=1+2000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:11aed000 ph data[0]=0:11aeb000 (2fff) get Phys(data[n=1+3000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:11ace000 ph data[1]=0:11ace000 (fff) get Phys(data[n=2+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:10bc7000 ph data[2]=0:10bc7000 (fff) get Phys(data[n=3+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:11ad8000 ph data[3]=0:11ad8000 (fff) get Phys(data[n=4+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:120e1000 ph data[4]=0:120e1000 (fff) get Phys(data[n=5+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:11aea000 ph data[5]=0:11aea000 (fff) get Phys(data[n=6+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:11af3000 ph data[6]=0:11af3000 (fff) get Phys(data[n=7+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:11af4000 ph data[6]=0:11af3000 (1fff) get Phys(data[n=7+2000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:11af5000 ph data[6]=0:11af3000 (2fff) get Phys(data[n=7+3000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:11ad6000 ph data[7]=0:11ad6000 (fff) get Phys(data[n=8+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:11ad7000 ph data[7]=0:11ad6000 (1fff) get Phys(data[n=8+2000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:11ae0000 ph data[8]=0:11ae0000 (fff) get Phys(data[n=9+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:11ae9000 ph data[9]=0:11ae9000 (fff) get Phys(data[n=10+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:11af2000 set TERM ph data[10]=0:11af2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b693bc ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb52f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb52f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:11afb000 ph data[0]=0:11afb000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:11afc000 ph data[0]=0:11afb000 (1fff) get Phys(data[n=1+2000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:11afd000 ph data[0]=0:11afb000 (2fff) get Phys(data[n=1+3000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:11ade000 ph data[1]=0:11ade000 (fff) get Phys(data[n=2+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:11adf000 ph data[1]=0:11ade000 (1fff) get Phys(data[n=2+2000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:11ae8000 ph data[2]=0:11ae8000 (fff) get Phys(data[n=3+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:11af1000 ph data[3]=0:11af1000 (fff) get Phys(data[n=4+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:11afa000 ph data[4]=0:11afa000 (fff) get Phys(data[n=5+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:11b03000 ph data[5]=0:11b03000 (fff) get Phys(data[n=6+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:11b04000 ph data[5]=0:11b03000 (1fff) get Phys(data[n=6+2000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:11b05000 ph data[5]=0:11b03000 (2fff) get Phys(data[n=6+3000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:11ae6000 ph data[6]=0:11ae6000 (fff) get Phys(data[n=7+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:11ae7000 ph data[6]=0:11ae6000 (1fff) get Phys(data[n=7+2000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:11af0000 ph data[7]=0:11af0000 (fff) get Phys(data[n=8+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:11af9000 ph data[8]=0:11af9000 (fff) get Phys(data[n=9+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:11b02000 set TERM ph data[9]=0:11b02000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b693bc ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb5370, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb5370, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:11b0b000 ph data[0]=0:11b0b000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:02664000 ph data[1]=0:2664000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:10b7d000 ph data[2]=0:10b7d000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:11aee000 ph data[3]=0:11aee000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:11aef000 ph data[3]=0:11aee000 (1fff) get Phys(data[n=4+2000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:11af8000 ph data[4]=0:11af8000 (fff) get Phys(data[n=5+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:11b01000 ph data[5]=0:11b01000 (fff) get Phys(data[n=6+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:11b0a000 ph data[6]=0:11b0a000 (fff) get Phys(data[n=7+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:0275b000 ph data[7]=0:275b000 (fff) get Phys(data[n=8+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:02774000 ph data[8]=0:2774000 (fff) get Phys(data[n=9+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:0292d000 ph data[9]=0:292d000 (fff) get Phys(data[n=10+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:11af6000 ph data[10]=0:11af6000 (fff) get Phys(data[n=11+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:11af7000 ph data[10]=0:11af6000 (1fff) get Phys(data[n=11+2000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:11b00000 ph data[11]=0:11b00000 (fff) get Phys(data[n=12+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:11b09000 ph data[12]=0:11b09000 (fff) get Phys(data[n=13+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:11b12000 set TERM ph data[13]=0:11b12000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eca638, CDB 0xb5eca668, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=a Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b693bc ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb53f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb53f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:0bd4b000 ph data[0]=0:bd4b000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:108cc000 ph data[1]=0:108cc000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:afcbd000 ph data[2]=0:afcbd000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:11afe000 ph data[3]=0:11afe000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:11aff000 ph data[3]=0:11afe000 (1fff) get Phys(data[n=4+2000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:11b08000 ph data[4]=0:11b08000 (fff) get Phys(data[n=5+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:11b11000 ph data[5]=0:11b11000 (fff) get Phys(data[n=6+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:11b1a000 ph data[6]=0:11b1a000 (fff) get Phys(data[n=7+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:02903000 ph data[7]=0:2903000 (fff) get Phys(data[n=8+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:1231c000 ph data[8]=0:1231c000 (fff) get Phys(data[n=9+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:12345000 ph data[9]=0:12345000 (fff) get Phys(data[n=10+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:11b06000 ph data[10]=0:11b06000 (fff) get Phys(data[n=11+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:11b07000 ph data[10]=0:11b06000 (1fff) get Phys(data[n=11+2000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:11b10000 ph data[11]=0:11b10000 (fff) get Phys(data[n=12+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:11b19000 ph data[12]=0:11b19000 (fff) get Phys(data[n=13+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:11a9a000 set TERM ph data[13]=0:11a9a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 11 request(s)! AtapiStartIo: next Srb b5eca638 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8400, WordsLeft 8400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10800, full size 10800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7d250, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7d250 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: qd=a Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb5270, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0xb, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7d250, CDB 0xb5e7d280, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=a Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c4560c ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc1f80, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fc1f80, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:10b9b000 ph data[0]=0:10b9b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10ba4000 set TERM ph data[1]=0:10ba4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 11 request(s)! AtapiStartIo: next Srb b5e7d250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=a Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb52f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xa, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb5370, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0xe, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5ecffc0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ecffc0, CDB 0xb5ecfff0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff250, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ecffc0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ecffc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ecffc0 AtapiInterrupt: NextRequest, srb=0xb5e94f60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e94f60, CDB 0xb5e94f90, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff2d0, Count 0x3e(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x8, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e94f60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3e00, WordsLeft 3e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 7c00, full size 7c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e94f60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e94f60 AtapiInterrupt: NextRequest, srb=0xb5eaeac8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaeac8, CDB 0xb5eaeaf8, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=6 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaeac8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaeac8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaeac8 AtapiInterrupt: NextRequest, srb=0xb5eaea80 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b45c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ecffc0, CDB 0xb5ecfff0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b60c ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff250, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fff250, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:10ba5000 ph data[0]=0:10ba5000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:10b8e000 set TERM ph data[1]=0:10b8e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5ecffc0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaea80, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaea80 AtapiInterrupt: NextRequest, srb=0xb5eca510 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eca510, CDB 0xb5eca540, AtaReq 0xb677a060, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x9, flags 0x45, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eca510 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eca510, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eca510 AtapiInterrupt: NextRequest, srb=0xb5eca4c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eca4c8, CDB 0xb5eca4f8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x9, flags 0x45, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eca4c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eca4c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eca4c8 AtapiInterrupt: NextRequest, srb=0xb5ecffc0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ecffc0, CDB 0xb5ecfff0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff250, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ecffc0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ecffc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ecffc0 AtapiInterrupt: NextRequest, srb=0xb5e7d250 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7d250, CDB 0xb5e7d280, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc1f80, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x2, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7d250 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7d250, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7d250 AtapiInterrupt: NextRequest, srb=0xb5eca638 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eca638, CDB 0xb5eca668, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb53f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xe, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eca638 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eca638, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eca638 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eaea80 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d00 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:12849000 ph data[0]=0:12849000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:1089a000 set TERM ph data[1]=0:1089a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaea80, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaea80 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eaea80 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c92000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:10a51000 set TERM ph data[0]=0:10a51000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaea80, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaea80 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eaea80 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d00 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:1304b000 ph data[0]=0:1304b000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:13044000 set TERM ph data[1]=0:13044000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaea80, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaea80 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eaea80 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c92000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:15dcb000 set TERM ph data[0]=0:15dcb000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaea80, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaea80 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5eaea80 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c44cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:15e67000 ph data[0]=0:15e67000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:15e30000 set TERM ph data[1]=0:15e30000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8e70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8e70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:15e03000 ph data[0]=0:15e03000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:15dfc000 ph data[1]=0:15dfc000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:15df5000 ph data[2]=0:15df5000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:1d39e000 ph data[3]=0:1d39e000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:15e0f000 ph data[4]=0:15e0f000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:1d3b0000 ph data[5]=0:1d3b0000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:15e11000 ph data[6]=0:15e11000 (fff) get Phys(data[n=7+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:15e3a000 ph data[7]=0:15e3a000 (fff) get Phys(data[n=8+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:15dfb000 ph data[8]=0:15dfb000 (fff) get Phys(data[n=9+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:15df4000 ph data[9]=0:15df4000 (fff) get Phys(data[n=10+1000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:15e3d000 ph data[10]=0:15e3d000 (fff) get Phys(data[n=11+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:1d3a6000 ph data[11]=0:1d3a6000 (fff) get Phys(data[n=12+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:15e07000 ph data[12]=0:15e07000 (fff) get Phys(data[n=13+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:1d3b8000 ph data[13]=0:1d3b8000 (fff) get Phys(data[n=14+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:15e09000 ph data[14]=0:15e09000 (fff) get Phys(data[n=15+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:15e32000 set TERM ph data[15]=0:15e32000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8ef0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8ef0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:15df3000 ph data[0]=0:15df3000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:15e44000 ph data[1]=0:15e44000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:15e35000 ph data[2]=0:15e35000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:1d3ae000 ph data[3]=0:1d3ae000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:15dff000 ph data[4]=0:15dff000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:1d4c8000 ph data[5]=0:1d4c8000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:15e01000 ph data[6]=0:15e01000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:1d49a000 ph data[7]=0:1d49a000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:15e3b000 ph data[8]=0:15e3b000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:15e3c000 ph data[8]=0:15e3b000 (1fff) get Phys(data[n=9+2000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:15ded000 ph data[9]=0:15ded000 (fff) get Phys(data[n=10+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:1d3b6000 ph data[10]=0:1d3b6000 (fff) get Phys(data[n=11+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:15df7000 ph data[11]=0:15df7000 (fff) get Phys(data[n=12+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:1d4c0000 ph data[12]=0:1d4c0000 (fff) get Phys(data[n=13+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:15e41000 ph data[13]=0:15e41000 (fff) get Phys(data[n=14+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:1d39a000 set TERM ph data[14]=0:1d39a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8f70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8f70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:15e33000 ph data[0]=0:15e33000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:15dec000 ph data[1]=0:15dec000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:1d38d000 ph data[2]=0:1d38d000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:15d4e000 ph data[3]=0:15d4e000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:15e37000 ph data[4]=0:15e37000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:1d4b8000 ph data[5]=0:1d4b8000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:15df9000 ph data[6]=0:15df9000 (fff) get Phys(data[n=7+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:1d3a2000 ph data[7]=0:1d3a2000 (fff) get Phys(data[n=8+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:15deb000 ph data[8]=0:15deb000 (fff) get Phys(data[n=9+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:1d38c000 ph data[9]=0:1d38c000 (fff) get Phys(data[n=10+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:1d395000 ph data[10]=0:1d395000 (fff) get Phys(data[n=11+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:1d4b6000 ph data[11]=0:1d4b6000 (fff) get Phys(data[n=12+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:15def000 ph data[12]=0:15def000 (fff) get Phys(data[n=13+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:1e880000 ph data[13]=0:1e880000 (fff) get Phys(data[n=14+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:15df1000 ph data[14]=0:15df1000 (fff) get Phys(data[n=15+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:1d3aa000 set TERM ph data[15]=0:1d3aa000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8ff0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8ff0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:1d39b000 ph data[0]=0:1d39b000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:1d394000 ph data[1]=0:1d394000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:1d39d000 ph data[2]=0:1d39d000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:1d4ae000 ph data[3]=0:1d4ae000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:1d3a7000 ph data[4]=0:1d3a7000 (fff) get Phys(data[n=5+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:1d438000 ph data[5]=0:1d438000 (fff) get Phys(data[n=6+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:1d3a1000 ph data[6]=0:1d3a1000 (fff) get Phys(data[n=7+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:1d3b2000 ph data[7]=0:1d3b2000 (fff) get Phys(data[n=8+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:1d3a3000 ph data[8]=0:1d3a3000 (fff) get Phys(data[n=9+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:1d39c000 ph data[9]=0:1d39c000 (fff) get Phys(data[n=10+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:1d3a5000 ph data[10]=0:1d3a5000 (fff) get Phys(data[n=11+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:1d4a6000 ph data[11]=0:1d4a6000 (fff) get Phys(data[n=12+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:1d3af000 ph data[12]=0:1d3af000 (fff) get Phys(data[n=13+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:1d430000 ph data[13]=0:1d430000 (fff) get Phys(data[n=14+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:1d3a9000 ph data[14]=0:1d3a9000 (fff) get Phys(data[n=15+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:1d4ba000 set TERM ph data[15]=0:1d4ba000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaea80, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaea80 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8e70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf704b40c ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c92000, count 1c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:15e63000 ph data[0]=0:15e63000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:15dcc000 set TERM ph data[1]=0:15dcc000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c4540c ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 1c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:15e63000 ph data[0]=0:15e63000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:15dcc000 set TERM ph data[1]=0:15dcc000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8ef0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0xf, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8f70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e73058 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8ff0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x10, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e73058, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e73058 AtapiInterrupt: NextRequest, srb=0xb5eaea80 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5eaea80, CDB 0xb5eaeab0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5eaea80 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered e00, WordsLeft e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1c00, full size 1c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5eaea80, status 1 AtapiInterrupt: RequestComplete, srb 0xb5eaea80 AtapiInterrupt: NextRequest, srb=0xb5e72af8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered e00, WordsLeft e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1c00, full size 1c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e72af8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e72af8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e73058 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe9e40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe9e40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:15e68000 ph data[0]=0:15e68000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:15dc9000 ph data[1]=0:15dc9000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:15e7a000 ph data[2]=0:15e7a000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:15dbb000 ph data[3]=0:15dbb000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:15dc4000 ph data[4]=0:15dc4000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:15dbd000 ph data[5]=0:15dbd000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:15e7e000 ph data[6]=0:15e7e000 (fff) get Phys(data[n=7+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:15dc7000 ph data[7]=0:15dc7000 (fff) get Phys(data[n=8+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:15e70000 ph data[8]=0:15e70000 (fff) get Phys(data[n=9+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:15dd1000 ph data[9]=0:15dd1000 (fff) get Phys(data[n=10+1000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:15daa000 ph data[10]=0:15daa000 (fff) get Phys(data[n=11+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:15dc3000 ph data[11]=0:15dc3000 (fff) get Phys(data[n=12+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:11a9c000 ph data[12]=0:11a9c000 (fff) get Phys(data[n=13+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:15dc5000 ph data[13]=0:15dc5000 (fff) get Phys(data[n=14+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:15e86000 ph data[14]=0:15e86000 (fff) get Phys(data[n=15+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:15dcf000 set TERM ph data[15]=0:15dcf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe9e40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe9ec0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe9ec0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:15e78000 ph data[0]=0:15e78000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:15dd9000 ph data[1]=0:15dd9000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:1306a000 ph data[2]=0:1306a000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:15dcb000 ph data[3]=0:15dcb000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:10a8c000 ph data[4]=0:10a8c000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:15dcd000 ph data[5]=0:15dcd000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:15db6000 ph data[6]=0:15db6000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:15dd7000 ph data[7]=0:15dd7000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:15d88000 ph data[8]=0:15d88000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:10a59000 ph data[9]=0:10a59000 (fff) get Phys(data[n=10+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:15d92000 ph data[10]=0:15d92000 (fff) get Phys(data[n=11+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:10a1b000 ph data[11]=0:10a1b000 (fff) get Phys(data[n=12+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:10a94000 ph data[12]=0:10a94000 (fff) get Phys(data[n=13+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:11b0d000 ph data[13]=0:11b0d000 (fff) get Phys(data[n=14+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:10aae000 ph data[14]=0:10aae000 (fff) get Phys(data[n=15+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:13077000 set TERM ph data[15]=0:13077000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe9f40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe9f40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:15d90000 ph data[0]=0:15d90000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:10a61000 ph data[1]=0:10a61000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:10a4a000 ph data[2]=0:10a4a000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:10a23000 ph data[3]=0:10a23000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:10a1c000 ph data[4]=0:10a1c000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:10a35000 ph data[5]=0:10a35000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:10ab6000 ph data[6]=0:10ab6000 (fff) get Phys(data[n=7+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:12367000 ph data[7]=0:12367000 (fff) get Phys(data[n=8+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:11a18000 ph data[8]=0:11a18000 (fff) get Phys(data[n=9+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:10a69000 ph data[9]=0:10a69000 (fff) get Phys(data[n=10+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:10a52000 ph data[10]=0:10a52000 (fff) get Phys(data[n=11+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:10a2b000 ph data[11]=0:10a2b000 (fff) get Phys(data[n=12+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:10964000 ph data[12]=0:10964000 (fff) get Phys(data[n=13+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:109bd000 ph data[13]=0:109bd000 (fff) get Phys(data[n=14+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:109be000 ph data[13]=0:109bd000 (1fff) get Phys(data[n=14+2000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:12faf000 set TERM ph data[14]=0:12faf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe9fc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe9fc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:10aa8000 ph data[0]=0:10aa8000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:12869000 ph data[1]=0:12869000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:10a5a000 ph data[2]=0:10a5a000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:1093b000 ph data[3]=0:1093b000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:1096c000 ph data[4]=0:1096c000 (fff) get Phys(data[n=5+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:109c5000 ph data[5]=0:109c5000 (fff) get Phys(data[n=6+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:10946000 ph data[6]=0:10946000 (fff) get Phys(data[n=7+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:12fb7000 ph data[7]=0:12fb7000 (fff) get Phys(data[n=8+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:10ab0000 ph data[8]=0:10ab0000 (fff) get Phys(data[n=9+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:12861000 ph data[9]=0:12861000 (fff) get Phys(data[n=10+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:10a62000 ph data[10]=0:10a62000 (fff) get Phys(data[n=11+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:12873000 ph data[11]=0:12873000 (fff) get Phys(data[n=12+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:10974000 ph data[12]=0:10974000 (fff) get Phys(data[n=13+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:109cd000 ph data[13]=0:109cd000 (fff) get Phys(data[n=14+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:10956000 ph data[14]=0:10956000 (fff) get Phys(data[n=15+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:12fbf000 set TERM ph data[15]=0:12fbf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9ad00 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:1283f000 ph data[0]=0:1283f000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:109c0000 set TERM ph data[1]=0:109c0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e73058, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e73058 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe9ec0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe9f40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0xf, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe9fc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e72af8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x2, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e72af8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e72af8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e72af8 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c92000, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:15dfe000 set TERM ph data[0]=0:15dfe000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058740, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b230 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c40000, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:15dfe000 set TERM ph data[0]=0:15dfe000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feeb70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feeb70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:15dd6000 ph data[0]=0:15dd6000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:13057000 ph data[1]=0:13057000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:15dd8000 ph data[2]=0:15dd8000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:13051000 ph data[3]=0:13051000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:15de2000 ph data[4]=0:15de2000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:1303b000 ph data[5]=0:1303b000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:1303c000 ph data[5]=0:1303b000 (1fff) get Phys(data[n=6+2000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:15ed5000 ph data[6]=0:15ed5000 (fff) get Phys(data[n=7+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:15dce000 ph data[7]=0:15dce000 (fff) get Phys(data[n=8+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:1304f000 ph data[8]=0:1304f000 (fff) get Phys(data[n=9+1000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:15dd0000 ph data[9]=0:15dd0000 (fff) get Phys(data[n=10+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:13049000 ph data[10]=0:13049000 (fff) get Phys(data[n=11+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:15dda000 ph data[11]=0:15dda000 (fff) get Phys(data[n=12+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:13033000 ph data[12]=0:13033000 (fff) get Phys(data[n=13+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:13034000 ph data[12]=0:13033000 (1fff) get Phys(data[n=13+2000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:15de5000 set TERM ph data[13]=0:15de5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feebf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feebf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:15dc6000 ph data[0]=0:15dc6000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:13047000 ph data[1]=0:13047000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:15dc8000 ph data[2]=0:15dc8000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:13041000 ph data[3]=0:13041000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:15dd2000 ph data[4]=0:15dd2000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:15ecb000 ph data[5]=0:15ecb000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:15ed4000 ph data[6]=0:15ed4000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:15ddd000 ph data[7]=0:15ddd000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:15dbe000 ph data[8]=0:15dbe000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:1303f000 ph data[9]=0:1303f000 (fff) get Phys(data[n=10+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:15dc0000 ph data[10]=0:15dc0000 (fff) get Phys(data[n=11+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:13031000 ph data[11]=0:13031000 (fff) get Phys(data[n=12+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:15dca000 ph data[12]=0:15dca000 (fff) get Phys(data[n=13+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:15de3000 ph data[13]=0:15de3000 (fff) get Phys(data[n=14+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:15de4000 ph data[13]=0:15de3000 (1fff) get Phys(data[n=14+2000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:15dd5000 set TERM ph data[14]=0:15dd5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feec70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feec70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:10b8e000 ph data[0]=0:10b8e000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:1382f000 ph data[1]=0:1382f000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:15db8000 ph data[2]=0:15db8000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:15de9000 ph data[3]=0:15de9000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:15dc2000 ph data[4]=0:15dc2000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:15ddb000 ph data[5]=0:15ddb000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:15ddc000 ph data[5]=0:15ddb000 (1fff) get Phys(data[n=6+2000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:15e5d000 ph data[6]=0:15e5d000 (fff) get Phys(data[n=7+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:121f6000 ph data[7]=0:121f6000 (fff) get Phys(data[n=8+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:15de7000 ph data[8]=0:15de7000 (fff) get Phys(data[n=9+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:15e80000 ph data[9]=0:15e80000 (fff) get Phys(data[n=10+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:12119000 ph data[10]=0:12119000 (fff) get Phys(data[n=11+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:15dba000 ph data[11]=0:15dba000 (fff) get Phys(data[n=12+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:15dd3000 ph data[12]=0:15dd3000 (fff) get Phys(data[n=13+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:15dd4000 ph data[12]=0:15dd3000 (1fff) get Phys(data[n=13+2000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:10ba5000 set TERM ph data[13]=0:10ba5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72700, CDB 0xb5e72730, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feecf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feecf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:120f6000 ph data[0]=0:120f6000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:10a37000 ph data[1]=0:10a37000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:120f0000 ph data[2]=0:120f0000 (fff) get Phys(data[n=3+1000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:12111000 ph data[3]=0:12111000 (fff) get Phys(data[n=4+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:1211a000 ph data[4]=0:1211a000 (fff) get Phys(data[n=5+1000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:15e63000 ph data[5]=0:15e63000 (fff) get Phys(data[n=6+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:15dcc000 ph data[6]=0:15dcc000 (fff) get Phys(data[n=7+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:12845000 ph data[7]=0:12845000 (fff) get Phys(data[n=8+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:120ee000 ph data[8]=0:120ee000 (fff) get Phys(data[n=9+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:120f7000 ph data[9]=0:120f7000 (fff) get Phys(data[n=10+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:120e8000 ph data[10]=0:120e8000 (fff) get Phys(data[n=11+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:12fd9000 ph data[11]=0:12fd9000 (fff) get Phys(data[n=12+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:12102000 ph data[12]=0:12102000 (fff) get Phys(data[n=13+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:12843000 ph data[13]=0:12843000 (fff) get Phys(data[n=14+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:137dc000 ph data[14]=0:137dc000 (fff) get Phys(data[n=15+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:1283d000 set TERM ph data[15]=0:1283d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e72700 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e72af8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e72af8 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058740, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x1, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa9e8 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feeb70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0xe, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cd00 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:120e6000 ph data[0]=0:120e6000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:120ef000 set TERM ph data[1]=0:120ef000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e73058 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feebf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e73058, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e73058 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feec70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xe, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e72700 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72700, CDB 0xb5e72730, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feecf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e72700 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e72700, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e72700 AtapiInterrupt: NextRequest, srb=0xb5e72af8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e72af8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e72af8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e92440 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:15d76000 set TERM ph data[0]=0:15d76000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d230 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c92000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:15d76000 set TERM ph data[0]=0:15d76000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e73058 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d104 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e73058, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e73058 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e92440 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b174 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:15dee000 ph data[0]=0:15dee000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:1305f000 set TERM ph data[1]=0:1305f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e92440 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9ad00 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:12206000 ph data[0]=0:12206000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:1222f000 set TERM ph data[1]=0:1222f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e92440 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6f9b230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c92000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:10bae000 set TERM ph data[0]=0:10bae000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058720, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e92440 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8420, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8420, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:12fcd000 ph data[0]=0:12fcd000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:11b16000 ph data[1]=0:11b16000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:12347000 ph data[2]=0:12347000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:11b28000 ph data[3]=0:11b28000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:12fb1000 ph data[4]=0:12fb1000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:11b52000 ph data[5]=0:11b52000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:12fe3000 ph data[6]=0:12fe3000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:11a84000 ph data[7]=0:11a84000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:12fc5000 ph data[8]=0:12fc5000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:afcb6000 ph data[9]=0:afcb6000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:1233f000 ph data[10]=0:1233f000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:11b30000 ph data[11]=0:11b30000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:12351000 ph data[12]=0:12351000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:11b4a000 ph data[13]=0:11b4a000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:12fdb000 ph data[14]=0:12fdb000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:0c814000 set TERM ph data[15]=0:c814000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8420, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe84a0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe84a0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:12fbd000 ph data[0]=0:12fbd000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:108f6000 ph data[1]=0:108f6000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:12337000 ph data[2]=0:12337000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:11b38000 ph data[3]=0:11b38000 (fff) get Phys(data[n=4+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:12349000 ph data[4]=0:12349000 (fff) get Phys(data[n=5+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:11b5a000 ph data[5]=0:11b5a000 (fff) get Phys(data[n=6+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:12fd3000 ph data[6]=0:12fd3000 (fff) get Phys(data[n=7+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:10be4000 ph data[7]=0:10be4000 (fff) get Phys(data[n=8+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:12fb5000 ph data[8]=0:12fb5000 (fff) get Phys(data[n=9+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:108ee000 ph data[9]=0:108ee000 (fff) get Phys(data[n=10+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:1232f000 ph data[10]=0:1232f000 (fff) get Phys(data[n=11+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:11b48000 ph data[11]=0:11b48000 (fff) get Phys(data[n=12+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:12341000 ph data[12]=0:12341000 (fff) get Phys(data[n=13+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:10a32000 ph data[13]=0:10a32000 (fff) get Phys(data[n=14+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:12fcb000 ph data[14]=0:12fcb000 (fff) get Phys(data[n=15+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:0c804000 set TERM ph data[15]=0:c804000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8520, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8520, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:12fad000 ph data[0]=0:12fad000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:11b26000 ph data[1]=0:11b26000 (fff) get Phys(data[n=2+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:12297000 ph data[2]=0:12297000 (fff) get Phys(data[n=3+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:10a00000 ph data[3]=0:10a00000 (fff) get Phys(data[n=4+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:11a29000 ph data[4]=0:11a29000 (fff) get Phys(data[n=5+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:10a2a000 ph data[5]=0:10a2a000 (fff) get Phys(data[n=6+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:12fc3000 ph data[6]=0:12fc3000 (fff) get Phys(data[n=7+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:10bdc000 ph data[7]=0:10bdc000 (fff) get Phys(data[n=8+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:12355000 ph data[8]=0:12355000 (fff) get Phys(data[n=9+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:0c80e000 ph data[9]=0:c80e000 (fff) get Phys(data[n=10+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:11b27000 ph data[10]=0:11b27000 (fff) get Phys(data[n=11+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:10a40000 ph data[11]=0:10a40000 (fff) get Phys(data[n=12+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:11a21000 ph data[12]=0:11a21000 (fff) get Phys(data[n=13+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:0c82a000 ph data[13]=0:c82a000 (fff) get Phys(data[n=14+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:12fbb000 ph data[14]=0:12fbb000 (fff) get Phys(data[n=15+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:0282c000 set TERM ph data[15]=0:282c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe85a0, OrigWordsRequested 0x7800, DevSize 0x78 IdeReadWrite (REQ): Starting sector is 38fe85a0, Number of WORDS 0x7800, DevSize 0x78 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bc2000, count f000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:1234d000 ph data[0]=0:1234d000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:10c06000 ph data[1]=0:10c06000 (fff) get Phys(data[n=2+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:11b37000 ph data[2]=0:11b37000 (fff) get Phys(data[n=3+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:10a08000 ph data[3]=0:10a08000 (fff) get Phys(data[n=4+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:11a31000 ph data[4]=0:11a31000 (fff) get Phys(data[n=5+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:15d02000 ph data[5]=0:15d02000 (fff) get Phys(data[n=6+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:12fb3000 ph data[6]=0:12fb3000 (fff) get Phys(data[n=7+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:02914000 ph data[7]=0:2914000 (fff) get Phys(data[n=8+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:10b25000 ph data[8]=0:10b25000 (fff) get Phys(data[n=9+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:10a3e000 ph data[9]=0:10a3e000 (fff) get Phys(data[n=10+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:11b2f000 ph data[10]=0:11b2f000 (fff) get Phys(data[n=11+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:10958000 ph data[11]=0:10958000 (fff) get Phys(data[n=12+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:afd51000 ph data[12]=0:afd51000 (fff) get Phys(data[n=13+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:10c02000 ph data[13]=0:10c02000 (fff) get Phys(data[n=14+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:afd3b000 set TERM ph data[14]=0:afd3b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d174 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11a2d000 ph data[0]=0:11a2d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c816000 set TERM ph data[1]=0:c816000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61450, CDB 0xb5e61480, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fee970, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fee970, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6be6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6be6000) AtapiVirtToPhysAddr_: f6be6000 -> 00000000:1e87a000 ph data[0]=0:1e87a000 (fff) get Phys(data[n=1+1000]=f6be7000) AtapiVirtToPhysAddr_: f6be7000 -> 00000000:26b2b000 ph data[1]=0:26b2b000 (fff) get Phys(data[n=2+1000]=f6be8000) AtapiVirtToPhysAddr_: f6be8000 -> 00000000:26b74000 ph data[2]=0:26b74000 (fff) get Phys(data[n=3+1000]=f6be9000) AtapiVirtToPhysAddr_: f6be9000 -> 00000000:1d415000 ph data[3]=0:1d415000 (fff) get Phys(data[n=4+1000]=f6bea000) AtapiVirtToPhysAddr_: f6bea000 -> 00000000:1d3ee000 ph data[4]=0:1d3ee000 (fff) get Phys(data[n=5+1000]=f6beb000) AtapiVirtToPhysAddr_: f6beb000 -> 00000000:1e87f000 ph data[5]=0:1e87f000 (fff) get Phys(data[n=6+1000]=f6bec000) AtapiVirtToPhysAddr_: f6bec000 -> 00000000:1dce0000 ph data[6]=0:1dce0000 (fff) get Phys(data[n=7+1000]=f6bed000) AtapiVirtToPhysAddr_: f6bed000 -> 00000000:1d429000 ph data[7]=0:1d429000 (fff) get Phys(data[n=8+1000]=f6bee000) AtapiVirtToPhysAddr_: f6bee000 -> 00000000:1d432000 ph data[8]=0:1d432000 (fff) get Phys(data[n=9+1000]=f6bef000) AtapiVirtToPhysAddr_: f6bef000 -> 00000000:1d433000 ph data[8]=0:1d432000 (1fff) get Phys(data[n=9+2000]=f6bf0000) AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:1d414000 ph data[9]=0:1d414000 (fff) get Phys(data[n=10+1000]=f6bf1000) AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:1d3e5000 ph data[10]=0:1d3e5000 (fff) get Phys(data[n=11+1000]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:1d3e6000 ph data[10]=0:1d3e5000 (1fff) get Phys(data[n=11+2000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:1d43f000 ph data[11]=0:1d43f000 (fff) get Phys(data[n=12+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:1e650000 ph data[12]=0:1e650000 (fff) get Phys(data[n=13+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:1d401000 set TERM ph data[13]=0:1d401000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e61450 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e60af0, CDB 0xb5e60b20, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fee9f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fee9f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:1d42a000 ph data[0]=0:1d42a000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:1d42b000 ph data[0]=0:1d42a000 (1fff) get Phys(data[n=1+2000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:1d424000 ph data[1]=0:1d424000 (fff) get Phys(data[n=2+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:1d3f5000 ph data[2]=0:1d3f5000 (fff) get Phys(data[n=3+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:1d3de000 ph data[3]=0:1d3de000 (fff) get Phys(data[n=4+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:1d437000 ph data[4]=0:1d437000 (fff) get Phys(data[n=5+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:26a40000 ph data[5]=0:26a40000 (fff) get Phys(data[n=6+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:1d3f9000 ph data[6]=0:1d3f9000 (fff) get Phys(data[n=7+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:1d402000 ph data[7]=0:1d402000 (fff) get Phys(data[n=8+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:1d423000 ph data[8]=0:1d423000 (fff) get Phys(data[n=9+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:1d41c000 ph data[9]=0:1d41c000 (fff) get Phys(data[n=10+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:1d3ed000 ph data[10]=0:1d3ed000 (fff) get Phys(data[n=11+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:1dcde000 ph data[11]=0:1dcde000 (fff) get Phys(data[n=12+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:1d42f000 ph data[12]=0:1d42f000 (fff) get Phys(data[n=13+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:26a48000 ph data[13]=0:26a48000 (fff) get Phys(data[n=14+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:1d3f1000 set TERM ph data[14]=0:1d3f1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e60af0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e60910, CDB 0xb5e60940, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feea70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feea70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c06000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:1d3fa000 ph data[0]=0:1d3fa000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:1d3fb000 ph data[0]=0:1d3fa000 (1fff) get Phys(data[n=1+2000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:1d3f4000 ph data[1]=0:1d3f4000 (fff) get Phys(data[n=2+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:1dcc5000 ph data[2]=0:1dcc5000 (fff) get Phys(data[n=3+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:1e886000 ph data[3]=0:1e886000 (fff) get Phys(data[n=4+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:1d3ff000 ph data[4]=0:1d3ff000 (fff) get Phys(data[n=5+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:1e928000 ph data[5]=0:1e928000 (fff) get Phys(data[n=6+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:1dcf9000 ph data[6]=0:1dcf9000 (fff) get Phys(data[n=7+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:1d3f2000 ph data[7]=0:1d3f2000 (fff) get Phys(data[n=8+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:1d3f3000 ph data[7]=0:1d3f2000 (1fff) get Phys(data[n=8+2000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:1d3ec000 ph data[8]=0:1d3ec000 (fff) get Phys(data[n=9+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:1e875000 ph data[9]=0:1e875000 (fff) get Phys(data[n=10+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:1e92e000 ph data[10]=0:1e92e000 (fff) get Phys(data[n=11+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:1d3f7000 ph data[11]=0:1d3f7000 (fff) get Phys(data[n=12+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:1e918000 ph data[12]=0:1e918000 (fff) get Phys(data[n=13+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:1dd01000 set TERM ph data[13]=0:1dd01000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e60910 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e60730, CDB 0xb5e60760, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feeaf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feeaf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:1e93a000 ph data[0]=0:1e93a000 (fff) get Phys(data[n=1+1000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:1d3e3000 ph data[1]=0:1d3e3000 (fff) get Phys(data[n=2+1000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:1d3e4000 ph data[1]=0:1d3e3000 (1fff) get Phys(data[n=2+2000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:1e91d000 ph data[2]=0:1e91d000 (fff) get Phys(data[n=3+1000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:1e91e000 ph data[2]=0:1e91d000 (1fff) get Phys(data[n=3+2000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:1d3ef000 ph data[3]=0:1d3ef000 (fff) get Phys(data[n=4+1000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:1e900000 ph data[4]=0:1e900000 (fff) get Phys(data[n=5+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:1dce9000 ph data[5]=0:1dce9000 (fff) get Phys(data[n=6+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:1dcfa000 ph data[6]=0:1dcfa000 (fff) get Phys(data[n=7+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:1dcf3000 ph data[7]=0:1dcf3000 (fff) get Phys(data[n=8+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:1dcf4000 ph data[7]=0:1dcf3000 (1fff) get Phys(data[n=8+2000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:1e915000 ph data[8]=0:1e915000 (fff) get Phys(data[n=9+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:1e906000 ph data[9]=0:1e906000 (fff) get Phys(data[n=10+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:1dcf7000 ph data[10]=0:1dcf7000 (fff) get Phys(data[n=11+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:2ed30000 ph data[11]=0:2ed30000 (fff) get Phys(data[n=12+1000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:1dcd9000 set TERM ph data[12]=0:1dcd9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e60730 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e73058 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe84a0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e73058, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e73058 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8520, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe85a0, Count 0x78(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7800, WordsLeft 7800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered f000, full size f000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e61450 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61450, CDB 0xb5e61480, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fee970, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0xe, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61450 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61450, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61450 AtapiInterrupt: NextRequest, srb=0xb5e60af0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e60af0, CDB 0xb5e60b20, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fee9f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0xf, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e60af0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e60af0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e60af0 AtapiInterrupt: NextRequest, srb=0xb5e60910 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e60910, CDB 0xb5e60940, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feea70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xe, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e60910 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e60910, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e60910 AtapiInterrupt: NextRequest, srb=0xb5e60730 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e60730, CDB 0xb5e60760, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feeaf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0xd, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e60730 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e60730, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e60730 AtapiInterrupt: NextRequest, srb=0xb5e72af8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e72af8, CDB 0xb5e72b28, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e72af8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e72af8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e72af8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c68 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3905c540, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3905c540, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0276e000 ph data[0]=0:276e000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02907000 set TERM ph data[1]=0:2907000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3905c540, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cd00 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:10a3e000 ph data[0]=0:10a3e000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:11b2f000 set TERM ph data[1]=0:11b2f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c68 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e750, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e750, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0276e000 ph data[0]=0:276e000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02907000 set TERM ph data[1]=0:2907000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e750, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d230 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c92000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:11aae000 set TERM ph data[0]=0:11aae000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058720, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x1, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58d00 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:1d436000 ph data[0]=0:1d436000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:11b3f000 set TERM ph data[1]=0:11b3f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c68 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39020fc0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39020fc0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:13066000 ph data[0]=0:13066000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:15d77000 set TERM ph data[1]=0:15d77000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39020fc0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c92000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:12876000 set TERM ph data[0]=0:12876000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x1, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (dll/win32/kernel32/client/loader.c:384) LoadLibraryExW(rshell.dll) failing with status c0000135 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e0c0 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960be60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960be60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6bf2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:15d87000 ph data[0]=0:15d87000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:13068000 ph data[1]=0:13068000 (fff) get Phys(data[n=2+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:10bc1000 ph data[2]=0:10bc1000 (fff) get Phys(data[n=3+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:02752000 ph data[3]=0:2752000 (fff) get Phys(data[n=4+1000]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:10ab3000 ph data[4]=0:10ab3000 (fff) get Phys(data[n=5+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:11a94000 ph data[5]=0:11a94000 (fff) get Phys(data[n=6+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:121e5000 ph data[6]=0:121e5000 (fff) get Phys(data[n=7+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:0276e000 ph data[7]=0:276e000 (fff) get Phys(data[n=8+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:15d7f000 ph data[8]=0:15d7f000 (fff) get Phys(data[n=9+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:1d3f0000 ph data[9]=0:1d3f0000 (fff) get Phys(data[n=10+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:11ae1000 ph data[10]=0:11ae1000 (fff) get Phys(data[n=11+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:1223a000 ph data[11]=0:1223a000 (fff) get Phys(data[n=12+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:10aab000 ph data[12]=0:10aab000 (fff) get Phys(data[n=13+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:12084000 ph data[13]=0:12084000 (fff) get Phys(data[n=14+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:15d7d000 ph data[14]=0:15d7d000 (fff) get Phys(data[n=15+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:12fc6000 set TERM ph data[15]=0:12fc6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960be60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x10, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960bee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c02000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:02907000 ph data[0]=0:2907000 (fff) get Phys(data[n=1+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:12fd0000 ph data[1]=0:12fd0000 (fff) get Phys(data[n=2+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:02749000 ph data[2]=0:2749000 (fff) get Phys(data[n=3+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:15e2a000 ph data[3]=0:15e2a000 (fff) get Phys(data[n=4+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:15d83000 ph data[4]=0:15d83000 (fff) get Phys(data[n=5+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:11ad4000 ph data[5]=0:11ad4000 (fff) get Phys(data[n=6+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:15d75000 ph data[6]=0:15d75000 (fff) get Phys(data[n=7+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:12fbe000 ph data[7]=0:12fbe000 (fff) get Phys(data[n=8+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:1220f000 ph data[8]=0:1220f000 (fff) get Phys(data[n=9+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:12fc8000 ph data[9]=0:12fc8000 (fff) get Phys(data[n=10+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:121c1000 ph data[10]=0:121c1000 (fff) get Phys(data[n=11+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:12fda000 ph data[11]=0:12fda000 (fff) get Phys(data[n=12+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:121cb000 ph data[12]=0:121cb000 (fff) get Phys(data[n=13+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:1234c000 ph data[13]=0:1234c000 (fff) get Phys(data[n=14+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:10955000 ph data[14]=0:10955000 (fff) get Phys(data[n=15+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:12fb6000 set TERM ph data[15]=0:12fb6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960bf60, OrigWordsRequested 0x1900, DevSize 0x19 IdeReadWrite (REQ): Starting sector is 3960bf60, Number of WORDS 0x1900, DevSize 0x19 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c12000, count 3200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:12207000 ph data[0]=0:12207000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:12fc0000 ph data[1]=0:12fc0000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:121b9000 ph data[2]=0:121b9000 (fff) get Phys(data[n=3+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:12fd2000 set TERM ph data[3]=0:12fd2000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68128 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f7c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904f7c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11a8d000 ph data[0]=0:11a8d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:15e2e000 set TERM ph data[1]=0:15e2e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61450, CDB 0xb5e61480, AtaReq 0xb67800f0, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e61450 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54240, CDB 0xb5e54270, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e54240 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e541f8, CDB 0xb5e54228, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e541f8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bee0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e73058 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bf60, Count 0x19(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1900, WordsLeft 1900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3200, full size 3200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e73058, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e73058 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa968 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f7c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x2, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0xb5e541f8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e541f8, CDB 0xb5e54228, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e541f8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e541f8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e541f8 AtapiInterrupt: NextRequest, srb=0xb5e54240 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54240, CDB 0xb5e54270, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b682f0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x9, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54240 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54240, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54240 AtapiInterrupt: NextRequest, srb=0xb5e54288 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68264 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68128 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f7d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904f7d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11b2f000 ph data[0]=0:11b2f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10bb0000 set TERM ph data[1]=0:10bb0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5e61450 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61450, CDB 0xb5e61480, AtaReq 0xb67800f0, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b6802c ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x9, flags 0x45, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61450 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61450, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61450 AtapiInterrupt: NextRequest, srb=0xb5e92440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e92440, CDB 0xb5e92470, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f7d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e92440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e92440, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e92440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e54288 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68128 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390523a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390523a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11ac7000 ph data[0]=0:11ac7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10b98000 set TERM ph data[1]=0:10b98000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390523a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e54288 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff180, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fff180, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bfc000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:1222f000 ph data[0]=0:1222f000 (fff) get Phys(data[n=1+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:12210000 ph data[1]=0:12210000 (fff) get Phys(data[n=2+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:02909000 ph data[2]=0:2909000 (fff) get Phys(data[n=3+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:12222000 ph data[3]=0:12222000 (fff) get Phys(data[n=4+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:15d6b000 ph data[4]=0:15d6b000 (fff) get Phys(data[n=5+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:12874000 ph data[5]=0:12874000 (fff) get Phys(data[n=6+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:12855000 ph data[6]=0:12855000 (fff) get Phys(data[n=7+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:121fe000 ph data[7]=0:121fe000 (fff) get Phys(data[n=8+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:1283f000 ph data[8]=0:1283f000 (fff) get Phys(data[n=9+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:12208000 ph data[9]=0:12208000 (fff) get Phys(data[n=10+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:10879000 ph data[10]=0:10879000 (fff) get Phys(data[n=11+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:1221a000 ph data[11]=0:1221a000 (fff) get Phys(data[n=12+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:15dab000 ph data[12]=0:15dab000 (fff) get Phys(data[n=13+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:15d64000 ph data[13]=0:15d64000 (fff) get Phys(data[n=14+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:15d5d000 ph data[14]=0:15d5d000 (fff) get Phys(data[n=15+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:1221e000 set TERM ph data[15]=0:1221e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff180, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d1e0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff200, OrigWordsRequested 0x4700, DevSize 0x47 IdeReadWrite (REQ): Starting sector is 38fff200, Number of WORDS 0x4700, DevSize 0x47 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c0c000, count 8e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:12117000 ph data[0]=0:12117000 (fff) get Phys(data[n=1+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:12200000 ph data[1]=0:12200000 (fff) get Phys(data[n=2+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:12851000 ph data[2]=0:12851000 (fff) get Phys(data[n=3+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:15eca000 ph data[3]=0:15eca000 (fff) get Phys(data[n=4+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:1dce3000 ph data[4]=0:1dce3000 (fff) get Phys(data[n=5+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:15d6c000 ph data[5]=0:15d6c000 (fff) get Phys(data[n=6+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:15e1d000 ph data[6]=0:15e1d000 (fff) get Phys(data[n=7+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:12216000 ph data[7]=0:12216000 (fff) get Phys(data[n=8+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:15e3f000 set TERM ph data[8]=0:15e3f000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6785168, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e522a8, CDB 0xb5e522d8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e522a8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8420, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8420, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:1e922000 ph data[0]=0:1e922000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:260fb000 ph data[1]=0:260fb000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:269dc000 ph data[2]=0:269dc000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:269e5000 ph data[3]=0:269e5000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:269f6000 ph data[4]=0:269f6000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:1e64f000 ph data[5]=0:1e64f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:269e8000 ph data[6]=0:269e8000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:15e29000 ph data[7]=0:15e29000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:1e912000 ph data[8]=0:1e912000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:269d3000 ph data[9]=0:269d3000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:269e4000 ph data[10]=0:269e4000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:269ed000 ph data[11]=0:269ed000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:269fe000 ph data[12]=0:269fe000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:26a3f000 ph data[13]=0:26a3f000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:269f0000 ph data[14]=0:269f0000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:11ad9000 set TERM ph data[15]=0:11ad9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54c20, CDB 0xb5e54c50, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe84a0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe84a0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:26122000 ph data[0]=0:26122000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:269db000 ph data[1]=0:269db000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:269ec000 ph data[2]=0:269ec000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:269f5000 ph data[3]=0:269f5000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:291e6000 ph data[4]=0:291e6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:26a47000 ph data[5]=0:26a47000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:26a00000 ph data[6]=0:26a00000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:1dcd1000 ph data[7]=0:1dcd1000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:269ca000 ph data[8]=0:269ca000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:269e3000 ph data[9]=0:269e3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:269f4000 ph data[10]=0:269f4000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:269fd000 ph data[11]=0:269fd000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:2881e000 ph data[12]=0:2881e000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:1e887000 ph data[13]=0:1e887000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:28820000 ph data[14]=0:28820000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:26a41000 set TERM ph data[15]=0:26a41000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e54c20 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55238, CDB 0xb5e55268, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8520, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8520, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:269d2000 ph data[0]=0:269d2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:269eb000 ph data[1]=0:269eb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:269fc000 ph data[2]=0:269fc000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:26a05000 ph data[3]=0:26a05000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:28816000 ph data[4]=0:28816000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:1e907000 ph data[5]=0:1e907000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:28818000 ph data[6]=0:28818000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:26a51000 ph data[7]=0:26a51000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:269da000 ph data[8]=0:269da000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:269f3000 ph data[9]=0:269f3000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:26a04000 ph data[10]=0:26a04000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:291dd000 ph data[11]=0:291dd000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:2880e000 ph data[12]=0:2880e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:1e92f000 ph data[13]=0:1e92f000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:28810000 ph data[14]=0:28810000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:1e931000 set TERM ph data[15]=0:1e931000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e55238 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e551f0, CDB 0xb5e55220, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe85a0, OrigWordsRequested 0x7800, DevSize 0x78 IdeReadWrite (REQ): Starting sector is 38fe85a0, Number of WORDS 0x7800, DevSize 0x78 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count f000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:269e2000 ph data[0]=0:269e2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:269fb000 ph data[1]=0:269fb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:26a0c000 ph data[2]=0:26a0c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:287e5000 ph data[3]=0:287e5000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:287fe000 ph data[4]=0:287fe000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:1e91f000 ph data[5]=0:1e91f000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:28808000 ph data[6]=0:28808000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:1e921000 ph data[7]=0:1e921000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:269ea000 ph data[8]=0:269ea000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:26a03000 ph data[9]=0:26a03000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:28824000 ph data[10]=0:28824000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:283fd000 ph data[11]=0:283fd000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:287f6000 ph data[12]=0:287f6000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:1f397000 ph data[13]=0:1f397000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:28800000 set TERM ph data[14]=0:28800000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5e551f0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53608, CDB 0xb5e53638, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=a Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b681c0 ** Ide: Command AtaReq 0xb6784150 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f7c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904f7c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:269f2000 ph data[0]=0:269f2000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:287e3000 set TERM ph data[1]=0:287e3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 11 request(s)! AtapiStartIo: next Srb b5e53608 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5e61bf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=a Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8420, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61bf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61bf8 AtapiInterrupt: NextRequest, srb=0xb5e54c20 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54c20, CDB 0xb5e54c50, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe84a0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x10, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54c20 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54c20, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54c20 AtapiInterrupt: NextRequest, srb=0xb5e55238 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55238, CDB 0xb5e55268, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8520, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55238 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55238, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55238 AtapiInterrupt: NextRequest, srb=0xb5e551f0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e551f0, CDB 0xb5e55220, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe85a0, Count 0x78(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xf, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e551f0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7800, WordsLeft 7800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered f000, full size f000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e551f0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e551f0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff200, Count 0x47(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x9, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4700, WordsLeft 4700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8e00, full size 8e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e73058 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e73058, CDB 0xb5e73088, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b5928c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e73058 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e73058, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e73058 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d758 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55238, CDB 0xb5e55268, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d60c ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff180, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fff180, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:137aa000 ph data[0]=0:137aa000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:15e23000 set TERM ph data[1]=0:15e23000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e55238 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e53bb0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6785168, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b5983c ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x9, flags 0x45, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b5960c ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8420, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fe8420, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:1dcd4000 ph data[0]=0:1dcd4000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:15e45000 set TERM ph data[1]=0:15e45000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0xb5e522a8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e522a8, CDB 0xb5e522d8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x9, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e522a8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e522a8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e522a8 AtapiInterrupt: NextRequest, srb=0xb5e55238 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55238, CDB 0xb5e55268, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff180, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55238 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55238, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55238 AtapiInterrupt: NextRequest, srb=0xb5e7e0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e0c0, CDB 0xb5e7e0f0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa948 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8420, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e0c0 AtapiInterrupt: NextRequest, srb=0xb5e53608 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53608, CDB 0xb5e53638, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa968 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f7c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x2, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53608 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53608, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53608 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e53bb0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b681c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f7d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904f7d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:269ce000 ph data[0]=0:269ce000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:15e4f000 set TERM ph data[1]=0:15e4f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f7d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e53bb0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b681c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390523a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390523a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11b16000 ph data[0]=0:11b16000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:109c7000 set TERM ph data[1]=0:109c7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390523a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e53bb0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:12fbc000 ph data[0]=0:12fbc000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10b95000 set TERM ph data[1]=0:10b95000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54c20, CDB 0xb5e54c50, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e54c20 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6784150, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6784150 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6785168, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b686a0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390523b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390523b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bca7000 ph data[0]=0:bca7000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:028e0000 ph data[1]=0:28e0000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bcc9000 ph data[2]=0:bcc9000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:02812000 ph data[3]=0:2812000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:10a53000 ph data[4]=0:10a53000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:108d4000 ph data[5]=0:108d4000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:026ad000 ph data[6]=0:26ad000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:1d49e000 ph data[7]=0:1d49e000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:11b3f000 ph data[8]=0:11b3f000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:1d400000 ph data[9]=0:1d400000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:1d3b1000 ph data[10]=0:1d3b1000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0273a000 ph data[11]=0:273a000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:10a03000 ph data[12]=0:10a03000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:10ba4000 ph data[13]=0:10ba4000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:024cd000 ph data[14]=0:24cd000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:1e87e000 set TERM ph data[15]=0:1e87e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a310, CDB 0xb5e4a340, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b686a0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052430, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052430, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:12217000 ph data[0]=0:12217000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:15de8000 ph data[1]=0:15de8000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:1d3b9000 ph data[2]=0:1d3b9000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:12fe2000 ph data[3]=0:12fe2000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:10b9b000 ph data[4]=0:10b9b000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:1d3a4000 ph data[5]=0:1d3a4000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:10a25000 ph data[6]=0:10a25000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:1d436000 ph data[7]=0:1d436000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:1221f000 ph data[8]=0:1221f000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:15e30000 ph data[9]=0:15e30000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:028f9000 ph data[10]=0:28f9000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:12fea000 ph data[11]=0:12fea000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:121d3000 ph data[12]=0:121d3000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:1d49c000 ph data[13]=0:1d49c000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:12225000 ph data[14]=0:12225000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:12fce000 set TERM ph data[15]=0:12fce000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e4a310 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a2c8, CDB 0xb5e4a2f8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b686a0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390524b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390524b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:12227000 ph data[0]=0:12227000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02400000 ph data[1]=0:2400000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:10bb1000 ph data[2]=0:10bb1000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:11b3a000 ph data[3]=0:11b3a000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:121db000 ph data[4]=0:121db000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:12354000 ph data[5]=0:12354000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:1222d000 ph data[6]=0:1222d000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:15dee000 ph data[7]=0:15dee000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bcbf000 ph data[8]=0:bcbf000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:10b60000 ph data[9]=0:10b60000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:10ba9000 ph data[10]=0:10ba9000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:02412000 ph data[11]=0:2412000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:121e3000 ph data[12]=0:121e3000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:15e4c000 ph data[13]=0:15e4c000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:12235000 ph data[14]=0:12235000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:12fd6000 set TERM ph data[15]=0:12fd6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e4a2c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a280, CDB 0xb5e4a2b0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b686a0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052530, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052530, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:10bbf000 ph data[0]=0:10bbf000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:10a10000 ph data[1]=0:10a10000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:10ba1000 ph data[2]=0:10ba1000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:12202000 ph data[3]=0:12202000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:121eb000 ph data[4]=0:121eb000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:12fb4000 ph data[5]=0:12fb4000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:121bd000 ph data[6]=0:121bd000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0275e000 ph data[7]=0:275e000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:10bb7000 ph data[8]=0:10bb7000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0c830000 ph data[9]=0:c830000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:10b99000 ph data[10]=0:10b99000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:1220a000 ph data[11]=0:1220a000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:10b93000 ph data[12]=0:10b93000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:137cc000 ph data[13]=0:137cc000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:11add000 ph data[14]=0:11add000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:11b2e000 set TERM ph data[15]=0:11b2e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e4a280 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390523b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x10, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6785168, SCmd 0x2a UniataNeedQueueing: qd=7 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b5933c ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x9, flags 0x45, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e54288 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=6 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59478 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x9, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5e61bf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6784150, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cf14 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x9, flags 0x45, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61bf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61bf8 AtapiInterrupt: NextRequest, srb=0xb5e54c20 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54c20, CDB 0xb5e54c50, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cf44 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54c20 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54c20, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54c20 AtapiInterrupt: NextRequest, srb=0xb5e4a310 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a310, CDB 0xb5e4a340, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cf44 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052430, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4a310 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4a310, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4a310 AtapiInterrupt: NextRequest, srb=0xb5e4a2c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a2c8, CDB 0xb5e4a2f8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bed70c ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390524b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4a2c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bed230 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0b30, OrigWordsRequested 0x7100, DevSize 0x71 IdeReadWrite (REQ): Starting sector is 38fc0b30, Number of WORDS 0x7100, DevSize 0x71 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b82000, count e200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:10baf000 ph data[0]=0:10baf000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:10b70000 ph data[1]=0:10b70000 (fff) get Phys(data[n=2+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:0bcb9000 ph data[2]=0:bcb9000 (fff) get Phys(data[n=3+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:11aca000 ph data[3]=0:11aca000 (fff) get Phys(data[n=4+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:15e23000 ph data[4]=0:15e23000 (fff) get Phys(data[n=5+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:026f4000 ph data[5]=0:26f4000 (fff) get Phys(data[n=6+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:11ad5000 ph data[6]=0:11ad5000 (fff) get Phys(data[n=7+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:afd26000 ph data[7]=0:afd26000 (fff) get Phys(data[n=8+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:287ef000 ph data[8]=0:287ef000 (fff) get Phys(data[n=9+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:12878000 ph data[9]=0:12878000 (fff) get Phys(data[n=10+1000]=f6b8c000) AtapiVirtToPhysAddr_: f6b8c000 -> 00000000:109f1000 ph data[10]=0:109f1000 (fff) get Phys(data[n=11+1000]=f6b8d000) AtapiVirtToPhysAddr_: f6b8d000 -> 00000000:137aa000 ph data[11]=0:137aa000 (fff) get Phys(data[n=12+1000]=f6b8e000) AtapiVirtToPhysAddr_: f6b8e000 -> 00000000:11ad3000 ph data[12]=0:11ad3000 (fff) get Phys(data[n=13+1000]=f6b8f000) AtapiVirtToPhysAddr_: f6b8f000 -> 00000000:10b8c000 ph data[13]=0:10b8c000 (fff) get Phys(data[n=14+1000]=f6b90000) AtapiVirtToPhysAddr_: f6b90000 -> 00000000:11acd000 set TERM ph data[14]=0:11acd000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d1e0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff5b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fff5b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ad4000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ad4000) AtapiVirtToPhysAddr_: f6ad4000 -> 00000000:2874f000 ph data[0]=0:2874f000 (fff) get Phys(data[n=1+1000]=f6ad5000) AtapiVirtToPhysAddr_: f6ad5000 -> 00000000:28790000 ph data[1]=0:28790000 (fff) get Phys(data[n=2+1000]=f6ad6000) AtapiVirtToPhysAddr_: f6ad6000 -> 00000000:28751000 ph data[2]=0:28751000 (fff) get Phys(data[n=3+1000]=f6ad7000) AtapiVirtToPhysAddr_: f6ad7000 -> 00000000:28772000 ph data[3]=0:28772000 (fff) get Phys(data[n=4+1000]=f6ad8000) AtapiVirtToPhysAddr_: f6ad8000 -> 00000000:28783000 ph data[4]=0:28783000 (fff) get Phys(data[n=5+1000]=f6ad9000) AtapiVirtToPhysAddr_: f6ad9000 -> 00000000:28764000 ph data[5]=0:28764000 (fff) get Phys(data[n=6+1000]=f6ada000) AtapiVirtToPhysAddr_: f6ada000 -> 00000000:28425000 ph data[6]=0:28425000 (fff) get Phys(data[n=7+1000]=f6adb000) AtapiVirtToPhysAddr_: f6adb000 -> 00000000:2877e000 ph data[7]=0:2877e000 (fff) get Phys(data[n=8+1000]=f6adc000) AtapiVirtToPhysAddr_: f6adc000 -> 00000000:28747000 ph data[8]=0:28747000 (fff) get Phys(data[n=9+1000]=f6add000) AtapiVirtToPhysAddr_: f6add000 -> 00000000:28788000 ph data[9]=0:28788000 (fff) get Phys(data[n=10+1000]=f6ade000) AtapiVirtToPhysAddr_: f6ade000 -> 00000000:28749000 ph data[10]=0:28749000 (fff) get Phys(data[n=11+1000]=f6adf000) AtapiVirtToPhysAddr_: f6adf000 -> 00000000:2876a000 ph data[11]=0:2876a000 (fff) get Phys(data[n=12+1000]=f6ae0000) AtapiVirtToPhysAddr_: f6ae0000 -> 00000000:2877b000 ph data[12]=0:2877b000 (fff) get Phys(data[n=13+1000]=f6ae1000) AtapiVirtToPhysAddr_: f6ae1000 -> 00000000:2875c000 ph data[13]=0:2875c000 (fff) get Phys(data[n=14+1000]=f6ae2000) AtapiVirtToPhysAddr_: f6ae2000 -> 00000000:2841d000 ph data[14]=0:2841d000 (fff) get Phys(data[n=15+1000]=f6ae3000) AtapiVirtToPhysAddr_: f6ae3000 -> 00000000:2842e000 set TERM ph data[15]=0:2842e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d1e0 ** Ide: Command AtaReq 0xb6784150 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff630, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fff630, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6ae4000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6ae4000) AtapiVirtToPhysAddr_: f6ae4000 -> 00000000:28437000 ph data[0]=0:28437000 (fff) get Phys(data[n=1+1000]=f6ae5000) AtapiVirtToPhysAddr_: f6ae5000 -> 00000000:28430000 ph data[1]=0:28430000 (fff) get Phys(data[n=2+1000]=f6ae6000) AtapiVirtToPhysAddr_: f6ae6000 -> 00000000:28741000 ph data[2]=0:28741000 (fff) get Phys(data[n=3+1000]=f6ae7000) AtapiVirtToPhysAddr_: f6ae7000 -> 00000000:28762000 ph data[3]=0:28762000 (fff) get Phys(data[n=4+1000]=f6ae8000) AtapiVirtToPhysAddr_: f6ae8000 -> 00000000:28773000 ph data[4]=0:28773000 (fff) get Phys(data[n=5+1000]=f6ae9000) AtapiVirtToPhysAddr_: f6ae9000 -> 00000000:28754000 ph data[5]=0:28754000 (fff) get Phys(data[n=6+1000]=f6aea000) AtapiVirtToPhysAddr_: f6aea000 -> 00000000:287bd000 ph data[6]=0:287bd000 (fff) get Phys(data[n=7+1000]=f6aeb000) AtapiVirtToPhysAddr_: f6aeb000 -> 00000000:28426000 ph data[7]=0:28426000 (fff) get Phys(data[n=8+1000]=f6aec000) AtapiVirtToPhysAddr_: f6aec000 -> 00000000:2879f000 ph data[8]=0:2879f000 (fff) get Phys(data[n=9+1000]=f6aed000) AtapiVirtToPhysAddr_: f6aed000 -> 00000000:28428000 ph data[9]=0:28428000 (fff) get Phys(data[n=10+1000]=f6aee000) AtapiVirtToPhysAddr_: f6aee000 -> 00000000:28439000 ph data[10]=0:28439000 (fff) get Phys(data[n=11+1000]=f6aef000) AtapiVirtToPhysAddr_: f6aef000 -> 00000000:2875a000 ph data[11]=0:2875a000 (fff) get Phys(data[n=12+1000]=f6af0000) AtapiVirtToPhysAddr_: f6af0000 -> 00000000:2842b000 ph data[12]=0:2842b000 (fff) get Phys(data[n=13+1000]=f6af1000) AtapiVirtToPhysAddr_: f6af1000 -> 00000000:2874c000 ph data[13]=0:2874c000 (fff) get Phys(data[n=14+1000]=f6af2000) AtapiVirtToPhysAddr_: f6af2000 -> 00000000:287b5000 ph data[14]=0:287b5000 (fff) get Phys(data[n=15+1000]=f6af3000) AtapiVirtToPhysAddr_: f6af3000 -> 00000000:2841e000 set TERM ph data[15]=0:2841e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d1e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff6b0, OrigWordsRequested 0x2d00, DevSize 0x2d IdeReadWrite (REQ): Starting sector is 38fff6b0, Number of WORDS 0x2d00, DevSize 0x2d AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6af4000, count 5a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6af4000) AtapiVirtToPhysAddr_: f6af4000 -> 00000000:28797000 ph data[0]=0:28797000 (fff) get Phys(data[n=1+1000]=f6af5000) AtapiVirtToPhysAddr_: f6af5000 -> 00000000:28420000 ph data[1]=0:28420000 (fff) get Phys(data[n=2+1000]=f6af6000) AtapiVirtToPhysAddr_: f6af6000 -> 00000000:28791000 ph data[2]=0:28791000 (fff) get Phys(data[n=3+1000]=f6af7000) AtapiVirtToPhysAddr_: f6af7000 -> 00000000:28752000 ph data[3]=0:28752000 (fff) get Phys(data[n=4+1000]=f6af8000) AtapiVirtToPhysAddr_: f6af8000 -> 00000000:28423000 ph data[4]=0:28423000 (fff) get Phys(data[n=5+1000]=f6af9000) AtapiVirtToPhysAddr_: f6af9000 -> 00000000:28744000 set TERM ph data[5]=0:28744000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58d00 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2842f000 ph data[0]=0:2842f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:287b0000 set TERM ph data[1]=0:287b0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4a2c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4a2c8 AtapiInterrupt: NextRequest, srb=0xb5e4a280 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a280, CDB 0xb5e4a2b0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052530, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x10, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4a280 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4a280, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4a280 AtapiInterrupt: NextRequest, srb=0xb5e61bf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x2, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61bf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61bf8 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff5b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68128 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f7c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904f7c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11b47000 ph data[0]=0:11b47000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10bc8000 set TERM ph data[1]=0:10bc8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a280, CDB 0xb5e4a2b0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c84000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:28417000 set TERM ph data[0]=0:28417000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e4a280 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a2c8, CDB 0xb5e4a2f8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e4a2c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e551f0, CDB 0xb5e55220, AtaReq 0xb67800f0, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e551f0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a958, CDB 0xb5e4a988, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e4a958 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55158, CDB 0xb5e55188, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5e55158 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff630, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x10, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e53bb0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff6b0, Count 0x2d(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x6, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2d00, WordsLeft 2d00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5a00, full size 5a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0xb5e54288 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0b30, Count 0x71(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xf, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d60c ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff5b0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fff5b0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:287f2000 ph data[0]=0:287f2000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:28743000 set TERM ph data[1]=0:28743000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7100, WordsLeft 7100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e200, full size e200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5e61bf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f7c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x2, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61bf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61bf8 AtapiInterrupt: NextRequest, srb=0xb5e4a280 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a280, CDB 0xb5e4a2b0, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa9e8 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x1, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4a280 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4a280, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4a280 AtapiInterrupt: NextRequest, srb=0xb5e53bb0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff5b0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0xb5e55158 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55158, CDB 0xb5e55188, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa968 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55158 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55158, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55158 AtapiInterrupt: NextRequest, srb=0xb5e4a958 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a958, CDB 0xb5e4a988, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bed620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4a958 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4a958, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4a958 AtapiInterrupt: NextRequest, srb=0xb5e551f0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e551f0, CDB 0xb5e55220, AtaReq 0xb67800f0, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b682f0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x9, flags 0x45, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e551f0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e551f0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e551f0 AtapiInterrupt: NextRequest, srb=0xb5e4a2c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4a2c8, CDB 0xb5e4a2f8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b6821c ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x9, flags 0x45, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4a2c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4a2c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4a2c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e54288 TopLevel (3), AtaReq 0xb67800f0 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68128 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f7d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904f7d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:287d4000 ph data[0]=0:287d4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28435000 set TERM ph data[1]=0:28435000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f7d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x2, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e54288 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68128 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390523a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390523a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11acc000 ph data[0]=0:11acc000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:1096d000 set TERM ph data[1]=0:1096d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390523a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e54288 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d1e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff520, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fff520, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c04000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:11b26000 ph data[0]=0:11b26000 (fff) get Phys(data[n=1+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:109c7000 ph data[1]=0:109c7000 (fff) get Phys(data[n=2+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:11b28000 ph data[2]=0:11b28000 (fff) get Phys(data[n=3+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:11a81000 ph data[3]=0:11a81000 (fff) get Phys(data[n=4+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:11b52000 ph data[4]=0:11b52000 (fff) get Phys(data[n=5+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:1096b000 ph data[5]=0:1096b000 (fff) get Phys(data[n=6+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:1286c000 ph data[6]=0:1286c000 (fff) get Phys(data[n=7+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:10965000 ph data[7]=0:10965000 (fff) get Phys(data[n=8+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:11b16000 ph data[8]=0:11b16000 (fff) get Phys(data[n=9+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:10bb7000 ph data[9]=0:10bb7000 (fff) get Phys(data[n=10+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:10ba0000 ph data[10]=0:10ba0000 (fff) get Phys(data[n=11+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:10b99000 ph data[11]=0:10b99000 (fff) get Phys(data[n=12+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:1220a000 ph data[12]=0:1220a000 (fff) get Phys(data[n=13+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:10b93000 ph data[13]=0:10b93000 (fff) get Phys(data[n=14+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:137cc000 ph data[14]=0:137cc000 (fff) get Phys(data[n=15+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:11add000 set TERM ph data[15]=0:11add000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff520, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d1e0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff5a0, OrigWordsRequested 0xe00, DevSize 0xe IdeReadWrite (REQ): Starting sector is 38fff5a0, Number of WORDS 0xe00, DevSize 0xe AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c14000, count 1c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:11b2e000 ph data[0]=0:11b2e000 (fff) get Phys(data[n=1+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:10bbf000 set TERM ph data[1]=0:10bbf000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bed230 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0b30, OrigWordsRequested 0x7100, DevSize 0x71 IdeReadWrite (REQ): Starting sector is 38fc0b30, Number of WORDS 0x7100, DevSize 0x71 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bf4000, count e200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:286ef000 ph data[0]=0:286ef000 (fff) get Phys(data[n=1+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:1d400000 ph data[1]=0:1d400000 (fff) get Phys(data[n=2+1000]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:286e9000 ph data[2]=0:286e9000 (fff) get Phys(data[n=3+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:02812000 ph data[3]=0:2812000 (fff) get Phys(data[n=4+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:10a53000 ph data[4]=0:10a53000 (fff) get Phys(data[n=5+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:108d4000 ph data[5]=0:108d4000 (fff) get Phys(data[n=6+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:026ad000 ph data[6]=0:26ad000 (fff) get Phys(data[n=7+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:1d49e000 ph data[7]=0:1d49e000 (fff) get Phys(data[n=8+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:286e7000 ph data[8]=0:286e7000 (fff) get Phys(data[n=9+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:28730000 ph data[9]=0:28730000 (fff) get Phys(data[n=10+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:28461000 ph data[10]=0:28461000 (fff) get Phys(data[n=11+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:28702000 ph data[11]=0:28702000 (fff) get Phys(data[n=12+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:28723000 ph data[12]=0:28723000 (fff) get Phys(data[n=13+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:28704000 ph data[13]=0:28704000 (fff) get Phys(data[n=14+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:2844d000 set TERM ph data[14]=0:2844d000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b681ac ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f7c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904f7c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bf2000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:2844f000 ph data[0]=0:2844f000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:28600000 set TERM ph data[1]=0:28600000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5e61bf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff5a0, Count 0xe(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x2, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered e00, WordsLeft e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1c00, full size 1c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61bf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61bf8 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa0c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0b30, Count 0x71(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7100, WordsLeft 7100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e200, full size e200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa968 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f7c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d60c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fff520, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fff520, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11a9f000 ph data[0]=0:11a9f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10b78000 set TERM ph data[1]=0:10b78000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fff520, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bed60c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0b30, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fc0b30, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:11ac9000 ph data[0]=0:11ac9000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10b92000 set TERM ph data[1]=0:10b92000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0b30, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b681ac ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f7d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904f7d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:10a4b000 ph data[0]=0:10a4b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:12fbc000 set TERM ph data[1]=0:12fbc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f7d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b681ac ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390523a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390523a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0c813000 ph data[0]=0:c813000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2881c000 set TERM ph data[1]=0:2881c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390523a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cc68 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390216c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390216c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:12fcf000 ph data[0]=0:12fcf000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:15e18000 set TERM ph data[1]=0:15e18000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390216c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cc68 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021710, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021710, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:12212000 ph data[0]=0:12212000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10bbb000 set TERM ph data[1]=0:10bbb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021710, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cc68 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021720, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021720, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28602000 ph data[0]=0:28602000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28663000 set TERM ph data[1]=0:28663000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021720, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cd00 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390216c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390216c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2869a000 ph data[0]=0:2869a000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:286b3000 set TERM ph data[1]=0:286b3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390216c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cd00 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021710, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021710, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:286da000 ph data[0]=0:286da000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2849b000 set TERM ph data[1]=0:2849b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021710, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cd00 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021720, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021720, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:285aa000 ph data[0]=0:285aa000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2848b000 set TERM ph data[1]=0:2848b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021720, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d230 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021730, OrigWordsRequested 0x5a00, DevSize 0x5a IdeReadWrite (REQ): Starting sector is 39021730, Number of WORDS 0x5a00, DevSize 0x5a AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c0a000, count b400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:285da000 ph data[0]=0:285da000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:2851b000 ph data[1]=0:2851b000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:285d4000 ph data[2]=0:285d4000 (fff) get Phys(data[n=3+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:284d5000 ph data[3]=0:284d5000 (fff) get Phys(data[n=4+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:28516000 ph data[4]=0:28516000 (fff) get Phys(data[n=5+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:28527000 ph data[5]=0:28527000 (fff) get Phys(data[n=6+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:28518000 ph data[6]=0:28518000 (fff) get Phys(data[n=7+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:28489000 ph data[7]=0:28489000 (fff) get Phys(data[n=8+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:285d2000 ph data[8]=0:285d2000 (fff) get Phys(data[n=9+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:28513000 ph data[9]=0:28513000 (fff) get Phys(data[n=10+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:285cc000 ph data[10]=0:285cc000 (fff) get Phys(data[n=11+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:284cd000 set TERM ph data[11]=0:284cd000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021730, Count 0x5a(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xc, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5a00, WordsLeft 5a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered b400, full size b400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cc68 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390216c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390216c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28542000 ph data[0]=0:28542000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:284bb000 set TERM ph data[1]=0:284bb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390216c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cc68 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021710, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021710, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2854a000 ph data[0]=0:2854a000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:284ab000 set TERM ph data[1]=0:284ab000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021710, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cc68 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021720, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021720, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2857a000 ph data[0]=0:2857a000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28ae3000 set TERM ph data[1]=0:28ae3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021720, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e7e108 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be8c68 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39020fc0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39020fc0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28502000 ph data[0]=0:28502000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2861b000 set TERM ph data[1]=0:2861b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39020fc0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb67800f0, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb677a060, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3b0c0, CDB 0xb5e3b0f0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b686a0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390523b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390523b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:28ae2000 ph data[0]=0:28ae2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:290c3000 ph data[1]=0:290c3000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2864c000 ph data[2]=0:2864c000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:2902d000 ph data[3]=0:2902d000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:2afd6000 ph data[4]=0:2afd6000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2912f000 ph data[5]=0:2912f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:290a0000 ph data[6]=0:290a0000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:28611000 ph data[7]=0:28611000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:2864a000 ph data[8]=0:2864a000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:290bb000 ph data[9]=0:290bb000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:28644000 ph data[10]=0:28644000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:29025000 ph data[11]=0:29025000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:2afce000 ph data[12]=0:2afce000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:29127000 ph data[13]=0:29127000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:29050000 ph data[14]=0:29050000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:28ae1000 set TERM ph data[15]=0:28ae1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e3b0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3a9c8, CDB 0xb5e3a9f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b686a0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052430, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052430, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:28642000 ph data[0]=0:28642000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:2902b000 ph data[1]=0:2902b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2863c000 ph data[2]=0:2863c000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2afcd000 ph data[3]=0:2afcd000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2afc6000 ph data[4]=0:2afc6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:2911f000 ph data[5]=0:2911f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:28fd8000 ph data[6]=0:28fd8000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:29161000 ph data[7]=0:29161000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:2863a000 ph data[8]=0:2863a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2901b000 ph data[9]=0:2901b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:28634000 ph data[10]=0:28634000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2afc5000 ph data[11]=0:2afc5000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:2afbe000 ph data[12]=0:2afbe000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:28fd7000 ph data[13]=0:28fd7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:2afd0000 ph data[14]=0:2afd0000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:29129000 set TERM ph data[15]=0:29129000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e3a9c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3a7e8, CDB 0xb5e3a818, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b686a0 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390524b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390524b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:28632000 ph data[0]=0:28632000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:2afd3000 ph data[1]=0:2afd3000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:2862c000 ph data[2]=0:2862c000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2afbd000 ph data[3]=0:2afbd000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2afb6000 ph data[4]=0:2afb6000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:290cf000 ph data[5]=0:290cf000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2afc8000 ph data[6]=0:2afc8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:29121000 ph data[7]=0:29121000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:2862a000 ph data[8]=0:2862a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:2afcb000 ph data[9]=0:2afcb000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:28624000 ph data[10]=0:28624000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:2afb5000 ph data[11]=0:2afb5000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:2afae000 ph data[12]=0:2afae000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:290c7000 ph data[13]=0:290c7000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:2afc0000 ph data[14]=0:2afc0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:29119000 set TERM ph data[15]=0:29119000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e3a7e8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3a608, CDB 0xb5e3a638, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b686a0 ** Ide: Command AtaReq 0xb6784150 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052530, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052530, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:28622000 ph data[0]=0:28622000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:2afc3000 ph data[1]=0:2afc3000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:2861c000 ph data[2]=0:2861c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2afad000 ph data[3]=0:2afad000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2afa6000 ph data[4]=0:2afa6000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:290bf000 ph data[5]=0:290bf000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2afb8000 ph data[6]=0:2afb8000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:290c1000 ph data[7]=0:290c1000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2861a000 ph data[8]=0:2861a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2afbb000 ph data[9]=0:2afbb000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:28614000 ph data[10]=0:28614000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:2afa5000 ph data[11]=0:2afa5000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2a276000 ph data[12]=0:2a276000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2903f000 ph data[13]=0:2903f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:2afb0000 ph data[14]=0:2afb0000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:290b9000 set TERM ph data[15]=0:290b9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e3a608 AtapiStartIo: query PORT for next request err:(base/services/wkssvc/rpcserver.c:61) RpcServerListen() failed (Status 6b1) AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e3b0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3b0c0, CDB 0xb5e3b0f0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390523b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3b0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3b0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3b0c0 AtapiInterrupt: NextRequest, srb=0xb5e53bb0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb677a060, SCmd 0x2a UniataNeedQueueing: qd=7 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be8e30 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x9, flags 0x45, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=6 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be9034 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e61bf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb67800f0, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665624 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x9, flags 0x45, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61bf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61bf8 AtapiInterrupt: NextRequest, srb=0xb5e54288 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59894 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x9, flags 0x45, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5e3a9c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3a9c8, CDB 0xb5e3a9f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b599c8 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052430, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3a9c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3a9c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3a9c8 AtapiInterrupt: NextRequest, srb=0xb5e3a7e8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3a7e8, CDB 0xb5e3a818, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b599c8 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390524b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x10, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3a7e8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3a7e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3a7e8 AtapiInterrupt: NextRequest, srb=0xb5e3a608 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3a608, CDB 0xb5e3a638, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b599c8 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052530, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x10, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3a608 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3a608, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3a608 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb6784150 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59174 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2859b000 ph data[0]=0:2859b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:286e4000 set TERM ph data[1]=0:286e4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x2, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb6784150 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be8d00 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39020fc0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39020fc0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:285cb000 ph data[0]=0:285cb000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:285b4000 set TERM ph data[1]=0:285b4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39020fc0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x2, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb6784150 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be9230 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021090, OrigWordsRequested 0x4000, DevSize 0x40 IdeReadWrite (REQ): Starting sector is 39021090, Number of WORDS 0x4000, DevSize 0x40 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6b8a000, count 8000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:28533000 ph data[0]=0:28533000 (fff) get Phys(data[n=1+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:285e4000 ph data[1]=0:285e4000 (fff) get Phys(data[n=2+1000]=f6b8c000) AtapiVirtToPhysAddr_: f6b8c000 -> 00000000:2854d000 ph data[2]=0:2854d000 (fff) get Phys(data[n=3+1000]=f6b8d000) AtapiVirtToPhysAddr_: f6b8d000 -> 00000000:28526000 ph data[3]=0:28526000 (fff) get Phys(data[n=4+1000]=f6b8e000) AtapiVirtToPhysAddr_: f6b8e000 -> 00000000:28487000 ph data[4]=0:28487000 (fff) get Phys(data[n=5+1000]=f6b8f000) AtapiVirtToPhysAddr_: f6b8f000 -> 00000000:28528000 ph data[5]=0:28528000 (fff) get Phys(data[n=6+1000]=f6b90000) AtapiVirtToPhysAddr_: f6b90000 -> 00000000:285b9000 ph data[6]=0:285b9000 (fff) get Phys(data[n=7+1000]=f6b91000) AtapiVirtToPhysAddr_: f6b91000 -> 00000000:2849a000 set TERM ph data[7]=0:2849a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021090, Count 0x40(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x8, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4000, WordsLeft 4000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8000, full size 8000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb6784150 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cd00 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390216c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390216c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:284d3000 ph data[0]=0:284d3000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28544000 set TERM ph data[1]=0:28544000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390216c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x2, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6abe000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6abe000) AtapiVirtToPhysAddr_: f6abe000 -> 00000000:28433000 ph data[0]=0:28433000 (fff) get Phys(data[n=1+1000]=f6abf000) AtapiVirtToPhysAddr_: f6abf000 -> 00000000:12854000 ph data[1]=0:12854000 (fff) get Phys(data[n=2+1000]=f6ac0000) AtapiVirtToPhysAddr_: f6ac0000 -> 00000000:28785000 ph data[2]=0:28785000 (fff) get Phys(data[n=3+1000]=f6ac1000) AtapiVirtToPhysAddr_: f6ac1000 -> 00000000:2879e000 ph data[3]=0:2879e000 (fff) get Phys(data[n=4+1000]=f6ac2000) AtapiVirtToPhysAddr_: f6ac2000 -> 00000000:2876f000 ph data[4]=0:2876f000 (fff) get Phys(data[n=5+1000]=f6ac3000) AtapiVirtToPhysAddr_: f6ac3000 -> 00000000:28438000 ph data[5]=0:28438000 (fff) get Phys(data[n=6+1000]=f6ac4000) AtapiVirtToPhysAddr_: f6ac4000 -> 00000000:28771000 ph data[6]=0:28771000 (fff) get Phys(data[n=7+1000]=f6ac5000) AtapiVirtToPhysAddr_: f6ac5000 -> 00000000:287ea000 ph data[7]=0:287ea000 (fff) get Phys(data[n=8+1000]=f6ac6000) AtapiVirtToPhysAddr_: f6ac6000 -> 00000000:28793000 ph data[8]=0:28793000 (fff) get Phys(data[n=9+1000]=f6ac7000) AtapiVirtToPhysAddr_: f6ac7000 -> 00000000:1285c000 ph data[9]=0:1285c000 (fff) get Phys(data[n=10+1000]=f6ac8000) AtapiVirtToPhysAddr_: f6ac8000 -> 00000000:2877d000 ph data[10]=0:2877d000 (fff) get Phys(data[n=11+1000]=f6ac9000) AtapiVirtToPhysAddr_: f6ac9000 -> 00000000:28796000 ph data[11]=0:28796000 (fff) get Phys(data[n=12+1000]=f6aca000) AtapiVirtToPhysAddr_: f6aca000 -> 00000000:28767000 ph data[12]=0:28767000 (fff) get Phys(data[n=13+1000]=f6acb000) AtapiVirtToPhysAddr_: f6acb000 -> 00000000:287a8000 ph data[13]=0:287a8000 (fff) get Phys(data[n=14+1000]=f6acc000) AtapiVirtToPhysAddr_: f6acc000 -> 00000000:28769000 ph data[14]=0:28769000 (fff) get Phys(data[n=15+1000]=f6acd000) AtapiVirtToPhysAddr_: f6acd000 -> 00000000:287da000 set TERM ph data[15]=0:287da000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3b0c0, CDB 0xb5e3b0f0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c0e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c0e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6ace000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6ace000) AtapiVirtToPhysAddr_: f6ace000 -> 00000000:2878b000 ph data[0]=0:2878b000 (fff) get Phys(data[n=1+1000]=f6acf000) AtapiVirtToPhysAddr_: f6acf000 -> 00000000:12864000 ph data[1]=0:12864000 (fff) get Phys(data[n=2+1000]=f6ad0000) AtapiVirtToPhysAddr_: f6ad0000 -> 00000000:28775000 ph data[2]=0:28775000 (fff) get Phys(data[n=3+1000]=f6ad1000) AtapiVirtToPhysAddr_: f6ad1000 -> 00000000:2878e000 ph data[3]=0:2878e000 (fff) get Phys(data[n=4+1000]=f6ad2000) AtapiVirtToPhysAddr_: f6ad2000 -> 00000000:2875f000 ph data[4]=0:2875f000 (fff) get Phys(data[n=5+1000]=f6ad3000) AtapiVirtToPhysAddr_: f6ad3000 -> 00000000:287a0000 ph data[5]=0:287a0000 (fff) get Phys(data[n=6+1000]=f6ad4000) AtapiVirtToPhysAddr_: f6ad4000 -> 00000000:28761000 ph data[6]=0:28761000 (fff) get Phys(data[n=7+1000]=f6ad5000) AtapiVirtToPhysAddr_: f6ad5000 -> 00000000:287d2000 ph data[7]=0:287d2000 (fff) get Phys(data[n=8+1000]=f6ad6000) AtapiVirtToPhysAddr_: f6ad6000 -> 00000000:11ac3000 ph data[8]=0:11ac3000 (fff) get Phys(data[n=9+1000]=f6ad7000) AtapiVirtToPhysAddr_: f6ad7000 -> 00000000:287cc000 ph data[9]=0:287cc000 (fff) get Phys(data[n=10+1000]=f6ad8000) AtapiVirtToPhysAddr_: f6ad8000 -> 00000000:2842d000 ph data[10]=0:2842d000 (fff) get Phys(data[n=11+1000]=f6ad9000) AtapiVirtToPhysAddr_: f6ad9000 -> 00000000:28786000 ph data[11]=0:28786000 (fff) get Phys(data[n=12+1000]=f6ada000) AtapiVirtToPhysAddr_: f6ada000 -> 00000000:28757000 ph data[12]=0:28757000 (fff) get Phys(data[n=13+1000]=f6adb000) AtapiVirtToPhysAddr_: f6adb000 -> 00000000:28798000 ph data[13]=0:28798000 (fff) get Phys(data[n=14+1000]=f6adc000) AtapiVirtToPhysAddr_: f6adc000 -> 00000000:28759000 ph data[14]=0:28759000 (fff) get Phys(data[n=15+1000]=f6add000) AtapiVirtToPhysAddr_: f6add000 -> 00000000:287ca000 set TERM ph data[15]=0:287ca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e3b0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6ade000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6ade000) AtapiVirtToPhysAddr_: f6ade000 -> 00000000:11abb000 ph data[0]=0:11abb000 (fff) get Phys(data[n=1+1000]=f6adf000) AtapiVirtToPhysAddr_: f6adf000 -> 00000000:2876c000 ph data[1]=0:2876c000 (fff) get Phys(data[n=2+1000]=f6ae0000) AtapiVirtToPhysAddr_: f6ae0000 -> 00000000:1096d000 ph data[2]=0:1096d000 (fff) get Phys(data[n=3+1000]=f6ae1000) AtapiVirtToPhysAddr_: f6ae1000 -> 00000000:15e2e000 ph data[3]=0:15e2e000 (fff) get Phys(data[n=4+1000]=f6ae2000) AtapiVirtToPhysAddr_: f6ae2000 -> 00000000:12fdf000 ph data[4]=0:12fdf000 (fff) get Phys(data[n=5+1000]=f6ae3000) AtapiVirtToPhysAddr_: f6ae3000 -> 00000000:15e28000 ph data[5]=0:15e28000 (fff) get Phys(data[n=6+1000]=f6ae4000) AtapiVirtToPhysAddr_: f6ae4000 -> 00000000:11ab9000 ph data[6]=0:11ab9000 (fff) get Phys(data[n=7+1000]=f6ae5000) AtapiVirtToPhysAddr_: f6ae5000 -> 00000000:120fa000 ph data[7]=0:120fa000 (fff) get Phys(data[n=8+1000]=f6ae6000) AtapiVirtToPhysAddr_: f6ae6000 -> 00000000:11ab3000 ph data[8]=0:11ab3000 (fff) get Phys(data[n=9+1000]=f6ae7000) AtapiVirtToPhysAddr_: f6ae7000 -> 00000000:11acc000 ph data[9]=0:11acc000 (fff) get Phys(data[n=10+1000]=f6ae8000) AtapiVirtToPhysAddr_: f6ae8000 -> 00000000:11a8d000 ph data[10]=0:11a8d000 (fff) get Phys(data[n=11+1000]=f6ae9000) AtapiVirtToPhysAddr_: f6ae9000 -> 00000000:15e26000 ph data[11]=0:15e26000 (fff) get Phys(data[n=12+1000]=f6aea000) AtapiVirtToPhysAddr_: f6aea000 -> 00000000:12fd7000 ph data[12]=0:12fd7000 (fff) get Phys(data[n=13+1000]=f6aeb000) AtapiVirtToPhysAddr_: f6aeb000 -> 00000000:15e20000 ph data[13]=0:15e20000 (fff) get Phys(data[n=14+1000]=f6aec000) AtapiVirtToPhysAddr_: f6aec000 -> 00000000:11ab1000 ph data[14]=0:11ab1000 (fff) get Phys(data[n=15+1000]=f6aed000) AtapiVirtToPhysAddr_: f6aed000 -> 00000000:15e22000 set TERM ph data[15]=0:15e22000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c1e0, OrigWordsRequested 0x5b00, DevSize 0x5b IdeReadWrite (REQ): Starting sector is 3960c1e0, Number of WORDS 0x5b00, DevSize 0x5b AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6aee000, count b600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6aee000) AtapiVirtToPhysAddr_: f6aee000 -> 00000000:2866b000 ph data[0]=0:2866b000 (fff) get Phys(data[n=1+1000]=f6aef000) AtapiVirtToPhysAddr_: f6aef000 -> 00000000:15e34000 ph data[1]=0:15e34000 (fff) get Phys(data[n=2+1000]=f6af0000) AtapiVirtToPhysAddr_: f6af0000 -> 00000000:12fe5000 ph data[2]=0:12fe5000 (fff) get Phys(data[n=3+1000]=f6af1000) AtapiVirtToPhysAddr_: f6af1000 -> 00000000:15e1e000 ph data[3]=0:15e1e000 (fff) get Phys(data[n=4+1000]=f6af2000) AtapiVirtToPhysAddr_: f6af2000 -> 00000000:12fcf000 ph data[4]=0:12fcf000 (fff) get Phys(data[n=5+1000]=f6af3000) AtapiVirtToPhysAddr_: f6af3000 -> 00000000:15e18000 ph data[5]=0:15e18000 (fff) get Phys(data[n=6+1000]=f6af4000) AtapiVirtToPhysAddr_: f6af4000 -> 00000000:11aa9000 ph data[6]=0:11aa9000 (fff) get Phys(data[n=7+1000]=f6af5000) AtapiVirtToPhysAddr_: f6af5000 -> 00000000:15e1a000 ph data[7]=0:15e1a000 (fff) get Phys(data[n=8+1000]=f6af6000) AtapiVirtToPhysAddr_: f6af6000 -> 00000000:28683000 ph data[8]=0:28683000 (fff) get Phys(data[n=9+1000]=f6af7000) AtapiVirtToPhysAddr_: f6af7000 -> 00000000:28604000 ph data[9]=0:28604000 (fff) get Phys(data[n=10+1000]=f6af8000) AtapiVirtToPhysAddr_: f6af8000 -> 00000000:286cd000 ph data[10]=0:286cd000 (fff) get Phys(data[n=11+1000]=f6af9000) AtapiVirtToPhysAddr_: f6af9000 -> 00000000:2867e000 set TERM ph data[11]=0:2867e000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e53bb0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c060, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x10, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cd00 ** Ide: Command AtaReq 0xb6784150 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021710, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021710, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:290cb000 ph data[0]=0:290cb000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28adc000 set TERM ph data[1]=0:28adc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0xb5e3b0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3b0c0, CDB 0xb5e3b0f0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c0e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3b0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3b0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3b0c0 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c160, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e54288 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c1e0, Count 0x5b(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0xc, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5b00, WordsLeft 5b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered b600, full size b600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021710, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x2, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e54288 TopLevel (3), AtaReq 0xb6784150 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8cd00 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021720, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021720, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2855b000 ph data[0]=0:2855b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2854c000 set TERM ph data[1]=0:2854c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021720, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0x2, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6784150, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e54288 TopLevel (3), AtaReq 0xb6784150 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6784150 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6784150: cmd aligned b6784200, d=50 ahci_cmd_ptr 0xb6784200 AtapiDmaSetup: mode 0x0, data f6c00000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6784200) AtapiVirtToPhysAddr_: b6784200 -> 00000000:08e47200 get Phys(data[0]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:28aeb000 ph data[0]=0:28aeb000 (fff) get Phys(data[n=1+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:2857c000 ph data[1]=0:2857c000 (fff) get Phys(data[n=2+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:2863d000 ph data[2]=0:2863d000 (fff) get Phys(data[n=3+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:28aee000 ph data[3]=0:28aee000 (fff) get Phys(data[n=4+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:28aff000 ph data[4]=0:28aff000 (fff) get Phys(data[n=5+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:28af0000 ph data[5]=0:28af0000 (fff) get Phys(data[n=6+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:284b1000 ph data[6]=0:284b1000 (fff) get Phys(data[n=7+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:284b2000 ph data[6]=0:284b1000 (1fff) get Phys(data[n=7+2000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:28af3000 ph data[7]=0:28af3000 (fff) get Phys(data[n=8+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:28584000 ph data[8]=0:28584000 (fff) get Phys(data[n=9+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:28645000 ph data[9]=0:28645000 (fff) get Phys(data[n=10+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:28af6000 ph data[10]=0:28af6000 (fff) get Phys(data[n=11+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:28b07000 ph data[11]=0:28b07000 (fff) get Phys(data[n=12+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:28af8000 ph data[12]=0:28af8000 (fff) get Phys(data[n=13+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:28559000 ph data[13]=0:28559000 (fff) get Phys(data[n=14+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:284ba000 set TERM ph data[14]=0:284ba000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6784200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c260, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6784150 AHCI AtaReq CMD 0xb6784200 (ph 0x8e47200) prd_length 0xf, flags 0x5, base 8e47200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb67800f0 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c2e0, OrigWordsRequested 0x2900, DevSize 0x29 IdeReadWrite (REQ): Starting sector is 3960c2e0, Number of WORDS 0x2900, DevSize 0x29 AtaReq 0xb67800f0: cmd aligned b6780180, d=30 ahci_cmd_ptr 0xb6780180 AtapiDmaSetup: mode 0x0, data f6c10000, count 5200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6780180) AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180 get Phys(data[0]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:28afb000 ph data[0]=0:28afb000 (fff) get Phys(data[n=1+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:284b4000 ph data[1]=0:284b4000 (fff) get Phys(data[n=2+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:2864d000 ph data[2]=0:2864d000 (fff) get Phys(data[n=3+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:28afe000 ph data[3]=0:28afe000 (fff) get Phys(data[n=4+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:284a7000 ph data[4]=0:284a7000 (fff) get Phys(data[n=5+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:28b00000 set TERM ph data[5]=0:28b00000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6780180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3b0c0, CDB 0xb5e3b0f0, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d230 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021730, OrigWordsRequested 0x5a00, DevSize 0x5a IdeReadWrite (REQ): Starting sector is 39021730, Number of WORDS 0x5a00, DevSize 0x5a AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6bf4000, count b400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:28623000 ph data[0]=0:28623000 (fff) get Phys(data[n=1+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:29174000 ph data[1]=0:29174000 (fff) get Phys(data[n=2+1000]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:29125000 ph data[2]=0:29125000 (fff) get Phys(data[n=3+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:2863e000 ph data[3]=0:2863e000 (fff) get Phys(data[n=4+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:2864f000 ph data[4]=0:2864f000 (fff) get Phys(data[n=5+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:28630000 ph data[5]=0:28630000 (fff) get Phys(data[n=6+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:28ad9000 ph data[6]=0:28ad9000 (fff) get Phys(data[n=7+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:284a2000 ph data[7]=0:284a2000 (fff) get Phys(data[n=8+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:2862b000 ph data[8]=0:2862b000 (fff) get Phys(data[n=9+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:284fc000 ph data[9]=0:284fc000 (fff) get Phys(data[n=10+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:2912d000 ph data[10]=0:2912d000 (fff) get Phys(data[n=11+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:28646000 set TERM ph data[11]=0:28646000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e3b0c0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be8c68 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39020fc0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39020fc0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6bf2000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:2858b000 ph data[0]=0:2858b000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:287bc000 set TERM ph data[1]=0:287bc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68ac0 ** Ide: Command AtaReq 0xb6785168 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390541b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390541b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6785168: cmd aligned b6785200, d=38 ahci_cmd_ptr 0xb6785200 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6785200) AtapiVirtToPhysAddr_: b6785200 -> 00000000:08e48200 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:2860c000 ph data[0]=0:2860c000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:286d5000 ph data[1]=0:286d5000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:28686000 ph data[2]=0:28686000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:28467000 ph data[3]=0:28467000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:28690000 ph data[4]=0:28690000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:28479000 ph data[5]=0:28479000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:15d62000 ph data[6]=0:15d62000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:2868b000 ph data[7]=0:2868b000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:1226c000 ph data[8]=0:1226c000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:286dd000 ph data[9]=0:286dd000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:13076000 ph data[10]=0:13076000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:2846f000 ph data[11]=0:2846f000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:15d70000 ph data[12]=0:15d70000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:285e9000 ph data[13]=0:285e9000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:15d6a000 ph data[14]=0:15d6a000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:28693000 set TERM ph data[15]=0:28693000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6785200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68ac0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39054230, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39054230, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:12284000 ph data[0]=0:12284000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:28655000 ph data[1]=0:28655000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:15d66000 ph data[2]=0:15d66000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:28477000 ph data[3]=0:28477000 (fff) get Phys(data[n=4+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:11ab0000 ph data[4]=0:11ab0000 (fff) get Phys(data[n=5+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:afd51000 ph data[5]=0:afd51000 (fff) get Phys(data[n=6+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:15d72000 ph data[6]=0:15d72000 (fff) get Phys(data[n=7+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:28743000 ph data[7]=0:28743000 (fff) get Phys(data[n=8+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:12294000 ph data[8]=0:12294000 (fff) get Phys(data[n=9+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2865d000 ph data[9]=0:2865d000 (fff) get Phys(data[n=10+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:15d6e000 ph data[10]=0:15d6e000 (fff) get Phys(data[n=11+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:10b97000 ph data[11]=0:10b97000 (fff) get Phys(data[n=12+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:10b70000 ph data[12]=0:10b70000 (fff) get Phys(data[n=13+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:109c9000 ph data[13]=0:109c9000 (fff) get Phys(data[n=14+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:11aa2000 ph data[14]=0:11aa2000 (fff) get Phys(data[n=15+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:15e23000 set TERM ph data[15]=0:15e23000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3b4f0, CDB 0xb5e3b520, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68ac0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390542b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390542b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:02824000 ph data[0]=0:2824000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:28665000 ph data[1]=0:28665000 (fff) get Phys(data[n=2+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:15d76000 ph data[2]=0:15d76000 (fff) get Phys(data[n=3+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:10baf000 ph data[3]=0:10baf000 (fff) get Phys(data[n=4+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:12878000 ph data[4]=0:12878000 (fff) get Phys(data[n=5+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:0bcb9000 ph data[5]=0:bcb9000 (fff) get Phys(data[n=6+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:11aca000 ph data[6]=0:11aca000 (fff) get Phys(data[n=7+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:11ad3000 ph data[7]=0:11ad3000 (fff) get Phys(data[n=8+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:026f4000 ph data[8]=0:26f4000 (fff) get Phys(data[n=9+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:11ad5000 ph data[9]=0:11ad5000 (fff) get Phys(data[n=10+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:afd26000 ph data[10]=0:afd26000 (fff) get Phys(data[n=11+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:287ef000 ph data[11]=0:287ef000 (fff) get Phys(data[n=12+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:28758000 ph data[12]=0:28758000 (fff) get Phys(data[n=13+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:109f1000 ph data[13]=0:109f1000 (fff) get Phys(data[n=14+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:137aa000 ph data[14]=0:137aa000 (fff) get Phys(data[n=15+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:10bbb000 set TERM ph data[15]=0:10bbb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e3b4f0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3c980, CDB 0xb5e3c9b0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68ac0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39054330, OrigWordsRequested 0x7900, DevSize 0x79 IdeReadWrite (REQ): Starting sector is 39054330, Number of WORDS 0x7900, DevSize 0x79 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bc2000, count f200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:10b8c000 ph data[0]=0:10b8c000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:11acd000 ph data[1]=0:11acd000 (fff) get Phys(data[n=2+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:1286e000 ph data[2]=0:1286e000 (fff) get Phys(data[n=3+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:283ff000 ph data[3]=0:283ff000 (fff) get Phys(data[n=4+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:286c8000 ph data[4]=0:286c8000 (fff) get Phys(data[n=5+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:287e9000 ph data[5]=0:287e9000 (fff) get Phys(data[n=6+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:12212000 ph data[6]=0:12212000 (fff) get Phys(data[n=7+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:286bb000 ph data[7]=0:286bb000 (fff) get Phys(data[n=8+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:2869c000 ph data[8]=0:2869c000 (fff) get Phys(data[n=9+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:285a5000 ph data[9]=0:285a5000 (fff) get Phys(data[n=10+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:286be000 ph data[10]=0:286be000 (fff) get Phys(data[n=11+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:286df000 ph data[11]=0:286df000 (fff) get Phys(data[n=12+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:286d0000 ph data[12]=0:286d0000 (fff) get Phys(data[n=13+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:28661000 ph data[13]=0:28661000 (fff) get Phys(data[n=14+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:2846a000 ph data[14]=0:2846a000 (fff) get Phys(data[n=15+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:286c3000 set TERM ph data[15]=0:286c3000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e3c980 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3bb00, CDB 0xb5e3bb30, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e3bb00 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e41570, CDB 0xb5e415a0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=9 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 10 request(s)! AtapiStartIo: next Srb b5e41570 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38500, CDB 0xb5e38530, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=a Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 11 request(s)! AtapiStartIo: next Srb b5e38500 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=b Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 12 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb67800f0, SCmd 0x28 UniataNeedQueueing: qd=b Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb67800f0 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c2e0, Count 0x29(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0 AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180) prd_length 0x6, flags 0x5, base 8e43180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2900, WordsLeft 2900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5200, full size 5200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6785168, SCmd 0x28 UniataNeedQueueing: qd=a Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6785168 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390541b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6785168 AHCI AtaReq CMD 0xb6785200 (ph 0x8e48200) prd_length 0x10, flags 0x5, base 8e48200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e61bf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=9 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39054230, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61bf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61bf8 AtapiInterrupt: NextRequest, srb=0xb5e3b4f0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3b4f0, CDB 0xb5e3b520, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390542b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x10, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3b4f0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3b4f0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3b4f0 AtapiInterrupt: NextRequest, srb=0xb5e3c980 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3c980, CDB 0xb5e3c9b0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39054330, Count 0x79(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3c980 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7900, WordsLeft 7900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered f200, full size f200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3c980, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3c980 AtapiInterrupt: NextRequest, srb=0xb5e3b0c0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3b0c0, CDB 0xb5e3b0f0, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021730, Count 0x5a(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0xc, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3b0c0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5a00, WordsLeft 5a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered b400, full size b400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3b0c0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3b0c0 AtapiInterrupt: NextRequest, srb=0xb5e53bb0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e53bb0, CDB 0xb5e53be0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b688e4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39020fc0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e53bb0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e53bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53bb0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68858 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x9, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d60c ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021730, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021730, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:285dc000 ph data[0]=0:285dc000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28545000 set TERM ph data[1]=0:28545000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e38500 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38500, CDB 0xb5e38530, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d4d8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x9, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38500 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38500, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38500 AtapiInterrupt: NextRequest, srb=0xb5e41570 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e41570, CDB 0xb5e415a0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be8e30 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e41570 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e41570, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e41570 AtapiInterrupt: NextRequest, srb=0xb5e3bb00 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e3bb00, CDB 0xb5e3bb30, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59668 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e3bb00 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e3bb00, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e3bb00 AtapiInterrupt: NextRequest, srb=0xb5e61bf8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e61bf8, CDB 0xb5e61c28, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58e14 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021730, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e61bf8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e61bf8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e61bf8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58d00 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2851e000 ph data[0]=0:2851e000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2852f000 set TERM ph data[1]=0:2852f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be8d00 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39020fc0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39020fc0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28547000 ph data[0]=0:28547000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:284d0000 set TERM ph data[1]=0:284d0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39020fc0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be9230 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021090, OrigWordsRequested 0x4000, DevSize 0x40 IdeReadWrite (REQ): Starting sector is 39021090, Number of WORDS 0x4000, DevSize 0x40 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c0e000, count 8000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:2860f000 ph data[0]=0:2860f000 (fff) get Phys(data[n=1+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:286d8000 ph data[1]=0:286d8000 (fff) get Phys(data[n=2+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:28681000 ph data[2]=0:28681000 (fff) get Phys(data[n=3+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:28472000 ph data[3]=0:28472000 (fff) get Phys(data[n=4+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:286cb000 ph data[4]=0:286cb000 (fff) get Phys(data[n=5+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2846c000 ph data[5]=0:2846c000 (fff) get Phys(data[n=6+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:285b5000 ph data[6]=0:285b5000 (fff) get Phys(data[n=7+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:286ce000 set TERM ph data[7]=0:286ce000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021090, Count 0x40(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x8, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4000, WordsLeft 4000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8000, full size 8000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6be960c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021090, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021090, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:286a7000 ph data[0]=0:286a7000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:28598000 set TERM ph data[1]=0:28598000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021090, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c8d174 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39021790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39021790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:28717000 ph data[0]=0:28717000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:28458000 set TERM ph data[1]=0:28458000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39021790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b491e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc07c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc07c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c04000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:2afc1000 ph data[0]=0:2afc1000 (fff) get Phys(data[n=1+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:29062000 ph data[1]=0:29062000 (fff) get Phys(data[n=2+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:2a263000 ph data[2]=0:2a263000 (fff) get Phys(data[n=3+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:29044000 ph data[3]=0:29044000 (fff) get Phys(data[n=4+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:2a25d000 ph data[4]=0:2a25d000 (fff) get Phys(data[n=5+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:2a23e000 ph data[5]=0:2a23e000 (fff) get Phys(data[n=6+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:2afc7000 ph data[6]=0:2afc7000 (fff) get Phys(data[n=7+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:2a260000 ph data[7]=0:2a260000 (fff) get Phys(data[n=8+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:2afb9000 ph data[8]=0:2afb9000 (fff) get Phys(data[n=9+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:2905a000 ph data[9]=0:2905a000 (fff) get Phys(data[n=10+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:2a25b000 ph data[10]=0:2a25b000 (fff) get Phys(data[n=11+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:2afd4000 ph data[11]=0:2afd4000 (fff) get Phys(data[n=12+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:2a255000 ph data[12]=0:2a255000 (fff) get Phys(data[n=13+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:2a2e6000 ph data[13]=0:2a2e6000 (fff) get Phys(data[n=14+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:2afbf000 ph data[14]=0:2afbf000 (fff) get Phys(data[n=15+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2a258000 set TERM ph data[15]=0:2a258000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc07c0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b491e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0840, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 38fc0840, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c14000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:2afb1000 ph data[0]=0:2afb1000 (fff) get Phys(data[n=1+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:29032000 set TERM ph data[1]=0:29032000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c84000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:2a271000 set TERM ph data[0]=0:2a271000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f98 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0840, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b491e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc07c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc07c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c04000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:2a242000 ph data[0]=0:2a242000 (fff) get Phys(data[n=1+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:2b7d3000 ph data[1]=0:2b7d3000 (fff) get Phys(data[n=2+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:2a2dc000 ph data[2]=0:2a2dc000 (fff) get Phys(data[n=3+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:2b7d5000 ph data[3]=0:2b7d5000 (fff) get Phys(data[n=4+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:2af3e000 ph data[4]=0:2af3e000 (fff) get Phys(data[n=5+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:2a2c7000 ph data[5]=0:2a2c7000 (fff) get Phys(data[n=6+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:2b7e8000 ph data[6]=0:2b7e8000 (fff) get Phys(data[n=7+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:2a2e1000 ph data[7]=0:2a2e1000 (fff) get Phys(data[n=8+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:2a2ea000 ph data[8]=0:2a2ea000 (fff) get Phys(data[n=9+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:2b7cb000 ph data[9]=0:2b7cb000 (fff) get Phys(data[n=10+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:2a2d4000 ph data[10]=0:2a2d4000 (fff) get Phys(data[n=11+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:2b7cd000 ph data[11]=0:2b7cd000 (fff) get Phys(data[n=12+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:2af36000 ph data[12]=0:2af36000 (fff) get Phys(data[n=13+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:2a2bf000 ph data[13]=0:2a2bf000 (fff) get Phys(data[n=14+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:2b7e0000 ph data[14]=0:2b7e0000 (fff) get Phys(data[n=15+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2a2d9000 set TERM ph data[15]=0:2a2d9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc07c0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b491e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0840, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 38fc0840, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c14000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:2a2e2000 ph data[0]=0:2a2e2000 (fff) get Phys(data[n=1+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:2b7c3000 set TERM ph data[1]=0:2b7c3000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d80 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0840, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b4960c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc07c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fc07c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c92000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c92000) AtapiVirtToPhysAddr_: f6c92000 -> 00000000:2865a000 ph data[0]=0:2865a000 (fff) get Phys(data[n=1+1000]=f6c93000) AtapiVirtToPhysAddr_: f6c93000 -> 00000000:2859b000 set TERM ph data[1]=0:2859b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc07c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700340c ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x9, flags 0x45, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7003494 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fe38c0 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59174 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:2b7dc000 ph data[0]=0:2b7dc000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:2aef5000 set TERM ph data[1]=0:2aef5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef570, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef570, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:2e6b7000 ph data[0]=0:2e6b7000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:2c8f0000 ph data[1]=0:2c8f0000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2e6d9000 ph data[2]=0:2e6d9000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:2af0a000 ph data[3]=0:2af0a000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:2c90b000 ph data[4]=0:2c90b000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2e6e4000 ph data[5]=0:2e6e4000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2c8f5000 ph data[6]=0:2c8f5000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:2c99e000 ph data[7]=0:2c99e000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:2e6af000 ph data[8]=0:2e6af000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2c8e8000 ph data[9]=0:2c8e8000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2e6d1000 ph data[10]=0:2e6d1000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:2b6fa000 ph data[11]=0:2b6fa000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:2c903000 ph data[12]=0:2c903000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2e6dc000 ph data[13]=0:2e6dc000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:2c8ed000 ph data[14]=0:2c8ed000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:2c996000 set TERM ph data[15]=0:2c996000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef570, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef5f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef5f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:2e6a7000 ph data[0]=0:2e6a7000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:2c8e0000 ph data[1]=0:2c8e0000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2e6c9000 ph data[2]=0:2e6c9000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2aeea000 ph data[3]=0:2aeea000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2c8fb000 ph data[4]=0:2c8fb000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:2e6d4000 ph data[5]=0:2e6d4000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2c8e5000 ph data[6]=0:2c8e5000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:2c98e000 ph data[7]=0:2c98e000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:2c917000 ph data[8]=0:2c917000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2c998000 ph data[9]=0:2c998000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:2e6c1000 ph data[10]=0:2e6c1000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2e6e2000 ph data[11]=0:2e6e2000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:2c8f3000 ph data[12]=0:2c8f3000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2e6cc000 ph data[13]=0:2e6cc000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:2c99d000 ph data[14]=0:2c99d000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:2c986000 set TERM ph data[15]=0:2c986000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef670, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef670, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:2c90f000 ph data[0]=0:2c90f000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:2c990000 ph data[1]=0:2c990000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:2e6b9000 ph data[2]=0:2e6b9000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2e6da000 ph data[3]=0:2e6da000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2c8eb000 ph data[4]=0:2c8eb000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:2e6c4000 ph data[5]=0:2e6c4000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2c995000 ph data[6]=0:2c995000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:2c97e000 ph data[7]=0:2c97e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:2c907000 ph data[8]=0:2c907000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:2c988000 ph data[9]=0:2c988000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:2e6b1000 ph data[10]=0:2e6b1000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:2e6d2000 ph data[11]=0:2e6d2000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:2c8e3000 ph data[12]=0:2c8e3000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:2e6bc000 ph data[13]=0:2e6bc000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:2c98d000 ph data[14]=0:2c98d000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:2c976000 set TERM ph data[15]=0:2c976000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef6f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef6f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:2c8ff000 ph data[0]=0:2c8ff000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:2c980000 ph data[1]=0:2c980000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:2e6a9000 ph data[2]=0:2e6a9000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2e6ca000 ph data[3]=0:2e6ca000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2c99b000 ph data[4]=0:2c99b000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:2e6b4000 ph data[5]=0:2e6b4000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2c985000 ph data[6]=0:2c985000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:2c96e000 ph data[7]=0:2c96e000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2c8f7000 ph data[8]=0:2c8f7000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2c978000 ph data[9]=0:2c978000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2e6a1000 ph data[10]=0:2e6a1000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:2e6c2000 ph data[11]=0:2e6c2000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2c993000 ph data[12]=0:2c993000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2c91c000 ph data[13]=0:2c91c000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:2c97d000 ph data[14]=0:2c97d000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:2c966000 set TERM ph data[15]=0:2c966000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2dc50, CDB 0xb5e2dc80, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58d00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:2c8ef000 ph data[0]=0:2c8ef000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:2c970000 set TERM ph data[1]=0:2c970000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e2dc50 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e448e8, CDB 0xb5e44918, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e448e8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e448a0, CDB 0xb5e448d0, AtaReq 0xb677a060, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e448a0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44858, CDB 0xb5e44888, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf700b5c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e44858 AtapiStartIo: query PORT for next request err:(base/services/srvsvc/rpcserver.c:64) RpcServerListen() failed (Status 6b1) AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef5f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef670, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e44930 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=6 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0xb5e448a0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e448a0, CDB 0xb5e448d0, AtaReq 0xb677a060, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x9, flags 0x45, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e448a0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e448a0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e448a0 AtapiInterrupt: NextRequest, srb=0xb5e44858 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44858, CDB 0xb5e44888, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44858 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44858, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44858 AtapiInterrupt: NextRequest, srb=0xb5e448e8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e448e8, CDB 0xb5e44918, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x9, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e448e8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e448e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e448e8 AtapiInterrupt: NextRequest, srb=0xb5e54288 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e54288, CDB 0xb5e542b8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef6f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e54288 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e54288, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e54288 AtapiInterrupt: NextRequest, srb=0xb5e2dc50 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2dc50, CDB 0xb5e2dc80, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e2dc50 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e2dc50, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2dc50 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e44930 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b691e0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fee600, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fee600, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ba4000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:2e6d3000 ph data[0]=0:2e6d3000 (fff) get Phys(data[n=1+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2b7c4000 ph data[1]=0:2b7c4000 (fff) get Phys(data[n=2+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2e6cd000 ph data[2]=0:2e6cd000 (fff) get Phys(data[n=3+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:2e6b6000 ph data[3]=0:2e6b6000 (fff) get Phys(data[n=4+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2af17000 ph data[4]=0:2af17000 (fff) get Phys(data[n=5+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:2e6c0000 ph data[5]=0:2e6c0000 (fff) get Phys(data[n=6+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:2af31000 ph data[6]=0:2af31000 (fff) get Phys(data[n=7+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2b7ca000 ph data[7]=0:2b7ca000 (fff) get Phys(data[n=8+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2e6db000 ph data[8]=0:2e6db000 (fff) get Phys(data[n=9+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:2b7cc000 ph data[9]=0:2b7cc000 (fff) get Phys(data[n=10+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:2e6d5000 ph data[10]=0:2e6d5000 (fff) get Phys(data[n=11+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2e6be000 ph data[11]=0:2e6be000 (fff) get Phys(data[n=12+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:2af1f000 ph data[12]=0:2af1f000 (fff) get Phys(data[n=13+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:2e6c8000 ph data[13]=0:2e6c8000 (fff) get Phys(data[n=14+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:2af39000 ph data[14]=0:2af39000 (fff) get Phys(data[n=15+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:2b7d2000 set TERM ph data[15]=0:2b7d2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fee600, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b691e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fee680, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fee680, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bb4000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:2af53000 ph data[0]=0:2af53000 (fff) get Phys(data[n=1+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2b7d4000 ph data[1]=0:2b7d4000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2e6dd000 ph data[2]=0:2e6dd000 (fff) get Phys(data[n=3+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:2e6c6000 ph data[3]=0:2e6c6000 (fff) get Phys(data[n=4+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2af27000 ph data[4]=0:2af27000 (fff) get Phys(data[n=5+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:2e6d0000 ph data[5]=0:2e6d0000 (fff) get Phys(data[n=6+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:2b7c1000 ph data[6]=0:2b7c1000 (fff) get Phys(data[n=7+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2b7da000 ph data[7]=0:2b7da000 (fff) get Phys(data[n=8+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2b6fb000 ph data[8]=0:2b6fb000 (fff) get Phys(data[n=9+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:2b7dc000 ph data[9]=0:2b7dc000 (fff) get Phys(data[n=10+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:2aef5000 ph data[10]=0:2aef5000 (fff) get Phys(data[n=11+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2e6ce000 ph data[11]=0:2e6ce000 (fff) get Phys(data[n=12+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:2af2f000 ph data[12]=0:2af2f000 (fff) get Phys(data[n=13+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:2e6d8000 ph data[13]=0:2e6d8000 (fff) get Phys(data[n=14+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:2b7c9000 ph data[14]=0:2b7c9000 (fff) get Phys(data[n=15+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:2b7e2000 set TERM ph data[15]=0:2b7e2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b691e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fee700, OrigWordsRequested 0x7000, DevSize 0x70 IdeReadWrite (REQ): Starting sector is 38fee700, Number of WORDS 0x7000, DevSize 0x70 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bc4000, count e000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:2af0b000 ph data[0]=0:2af0b000 (fff) get Phys(data[n=1+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2853c000 ph data[1]=0:2853c000 (fff) get Phys(data[n=2+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:28575000 ph data[2]=0:28575000 (fff) get Phys(data[n=3+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:285c6000 ph data[3]=0:285c6000 (fff) get Phys(data[n=4+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2af37000 ph data[4]=0:2af37000 (fff) get Phys(data[n=5+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:2af08000 ph data[5]=0:2af08000 (fff) get Phys(data[n=6+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:2b7d1000 ph data[6]=0:2b7d1000 (fff) get Phys(data[n=7+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2b7ea000 ph data[7]=0:2b7ea000 (fff) get Phys(data[n=8+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:285cb000 ph data[8]=0:285cb000 (fff) get Phys(data[n=9+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:285b4000 ph data[9]=0:285b4000 (fff) get Phys(data[n=10+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:28535000 ph data[10]=0:28535000 (fff) get Phys(data[n=11+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:285ce000 ph data[11]=0:285ce000 (fff) get Phys(data[n=12+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:28497000 ph data[12]=0:28497000 (fff) get Phys(data[n=13+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:285d0000 set TERM ph data[13]=0:285d0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:27461000 ph data[0]=0:27461000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:27462000 ph data[0]=0:27461000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:27463000 ph data[0]=0:27461000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:2746c000 ph data[1]=0:2746c000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:2746d000 ph data[1]=0:2746c000 (1fff) get Phys(data[n=2+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:27466000 ph data[2]=0:27466000 (fff) get Phys(data[n=3+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2745f000 ph data[3]=0:2745f000 (fff) get Phys(data[n=4+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:27468000 ph data[4]=0:27468000 (fff) get Phys(data[n=5+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:27469000 ph data[4]=0:27468000 (1fff) get Phys(data[n=5+2000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2746a000 ph data[4]=0:27468000 (2fff) get Phys(data[n=5+3000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2746b000 ph data[4]=0:27468000 (3fff) get Phys(data[n=5+4000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:27474000 ph data[5]=0:27474000 (fff) get Phys(data[n=6+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:27475000 ph data[5]=0:27474000 (1fff) get Phys(data[n=6+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2746e000 ph data[6]=0:2746e000 (fff) get Phys(data[n=7+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:27467000 ph data[7]=0:27467000 (fff) get Phys(data[n=8+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:27470000 set TERM ph data[8]=0:27470000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2b1e0, CDB 0xb5e2b210, AtaReq 0xb677a060, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:27471000 ph data[0]=0:27471000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:27472000 ph data[0]=0:27471000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:27473000 ph data[0]=0:27471000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2747c000 ph data[1]=0:2747c000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2747d000 ph data[1]=0:2747c000 (1fff) get Phys(data[n=2+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:27476000 ph data[2]=0:27476000 (fff) get Phys(data[n=3+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2746f000 ph data[3]=0:2746f000 (fff) get Phys(data[n=4+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:27478000 ph data[4]=0:27478000 (fff) get Phys(data[n=5+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:27479000 ph data[4]=0:27478000 (1fff) get Phys(data[n=5+2000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2747a000 ph data[4]=0:27478000 (2fff) get Phys(data[n=5+3000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:2747b000 ph data[4]=0:27478000 (3fff) get Phys(data[n=5+4000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:27484000 ph data[5]=0:27484000 (fff) get Phys(data[n=6+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:27485000 ph data[5]=0:27484000 (1fff) get Phys(data[n=6+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2747e000 ph data[6]=0:2747e000 (fff) get Phys(data[n=7+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:27477000 ph data[7]=0:27477000 (fff) get Phys(data[n=8+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:27480000 set TERM ph data[8]=0:27480000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e2b1e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2bd00, CDB 0xb5e2bd30, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:27481000 ph data[0]=0:27481000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:27482000 ph data[0]=0:27481000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:27483000 ph data[0]=0:27481000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2748c000 ph data[1]=0:2748c000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2748d000 ph data[1]=0:2748c000 (1fff) get Phys(data[n=2+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:27486000 ph data[2]=0:27486000 (fff) get Phys(data[n=3+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2747f000 ph data[3]=0:2747f000 (fff) get Phys(data[n=4+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:27488000 ph data[4]=0:27488000 (fff) get Phys(data[n=5+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:27489000 ph data[4]=0:27488000 (1fff) get Phys(data[n=5+2000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:2748a000 ph data[4]=0:27488000 (2fff) get Phys(data[n=5+3000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:2748b000 ph data[4]=0:27488000 (3fff) get Phys(data[n=5+4000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:27494000 ph data[5]=0:27494000 (fff) get Phys(data[n=6+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:27495000 ph data[5]=0:27494000 (1fff) get Phys(data[n=6+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:2748e000 ph data[6]=0:2748e000 (fff) get Phys(data[n=7+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:27487000 ph data[7]=0:27487000 (fff) get Phys(data[n=8+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:27490000 set TERM ph data[8]=0:27490000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e2bd00 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e335d0, CDB 0xb5e33600, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf70035c0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:27491000 ph data[0]=0:27491000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:27492000 ph data[0]=0:27491000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:27493000 ph data[0]=0:27491000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2749c000 ph data[1]=0:2749c000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2749d000 ph data[1]=0:2749c000 (1fff) get Phys(data[n=2+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:27496000 ph data[2]=0:27496000 (fff) get Phys(data[n=3+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2748f000 ph data[3]=0:2748f000 (fff) get Phys(data[n=4+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:27498000 ph data[4]=0:27498000 (fff) get Phys(data[n=5+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:27499000 ph data[4]=0:27498000 (1fff) get Phys(data[n=5+2000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2749a000 ph data[4]=0:27498000 (2fff) get Phys(data[n=5+3000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2749b000 ph data[4]=0:27498000 (3fff) get Phys(data[n=5+4000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:274a4000 ph data[5]=0:274a4000 (fff) get Phys(data[n=6+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:274a5000 ph data[5]=0:274a4000 (1fff) get Phys(data[n=6+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2749e000 ph data[6]=0:2749e000 (fff) get Phys(data[n=7+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:27497000 ph data[7]=0:27497000 (fff) get Phys(data[n=8+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:274a0000 set TERM ph data[8]=0:274a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e335d0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2b738, CDB 0xb5e2b768, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c460, OrigWordsRequested 0x1f00, DevSize 0x1f IdeReadWrite (REQ): Starting sector is 3960c460, Number of WORDS 0x1f00, DevSize 0x1f AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ba0000, count 3e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:285e3000 ph data[0]=0:285e3000 (fff) get Phys(data[n=1+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:286bc000 ph data[1]=0:286bc000 (fff) get Phys(data[n=2+1000]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:2848d000 ph data[2]=0:2848d000 (fff) get Phys(data[n=3+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:2848e000 set TERM ph data[2]=0:2848d000 (1dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e2b738 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c84000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:2a2ab000 set TERM ph data[0]=0:2a2ab000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=8 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fee680, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e55d00 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x1, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55d00, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55d00 AtapiInterrupt: NextRequest, srb=0xb5e2b738 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2b738, CDB 0xb5e2b768, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c460, Count 0x1f(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x3, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e2b738 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59174 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:2873d000 ph data[0]=0:2873d000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:1306e000 set TERM ph data[1]=0:1306e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1f00, WordsLeft 1f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3e00, full size 3e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e2b738, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2b738 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e7e108 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e7e108, CDB 0xb5e7e138, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa9e8 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fee700, Count 0x70(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0xe, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e7e108 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7000, WordsLeft 7000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e000, full size e000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e7e108, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e7e108 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b5933c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008170, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2b738, CDB 0xb5e2b768, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b6960c ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fee600, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fee600, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:2b725000 ph data[0]=0:2b725000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:2e53e000 set TERM ph data[1]=0:2e53e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e2b738 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e2b1e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2b1e0, CDB 0xb5e2b210, AtaReq 0xb677a060, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69508 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x9, flags 0x45, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e2b1e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e2b1e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2b1e0 AtapiInterrupt: NextRequest, srb=0xb5e2bd00 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2bd00, CDB 0xb5e2bd30, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59478 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39008270, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e2bd00 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e2bd00, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2bd00 AtapiInterrupt: NextRequest, srb=0xb5e335d0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e335d0, CDB 0xb5e33600, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59570 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x9, flags 0x45, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e335d0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58d00 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2c977000 ph data[0]=0:2c977000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2c8d8000 set TERM ph data[1]=0:2c8d8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e335d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e335d0 AtapiInterrupt: NextRequest, srb=0xb5e2b738 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e2b738, CDB 0xb5e2b768, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58bc4 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fee600, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e2b738 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e2b738, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2b738 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 fixme:(dll/win32/shdocvw/shdocvw_main.c:215) (), stub! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28799000 ph data[0]=0:28799000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10b92000 set TERM ph data[1]=0:10b92000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c84000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:287b9000 set TERM ph data[0]=0:287b9000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x1, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58d00 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2c98b000 ph data[0]=0:2c98b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2afcc000 set TERM ph data[1]=0:2afcc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:285bb000 set TERM ph data[0]=0:285bb000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58d00 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e53b000 ph data[0]=0:2e53b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e664000 set TERM ph data[1]=0:2e664000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28424000 ph data[0]=0:28424000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:286f5000 set TERM ph data[1]=0:286f5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c84000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:2e634000 set TERM ph data[0]=0:2e634000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x1, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28495000 ph data[0]=0:28495000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e64e000 set TERM ph data[1]=0:2e64e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2c96d000 ph data[0]=0:2c96d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2c91e000 set TERM ph data[1]=0:2c91e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e619000 ph data[0]=0:2e619000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e582000 set TERM ph data[1]=0:2e582000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e559000 ph data[0]=0:2e559000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e602000 set TERM ph data[1]=0:2e602000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e5d9000 ph data[0]=0:2e5d9000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e5c2000 set TERM ph data[1]=0:2e5c2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e623000 ph data[0]=0:2e623000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e62c000 set TERM ph data[1]=0:2e62c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f10, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f10, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e573000 ph data[0]=0:2e573000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e584000 set TERM ph data[1]=0:2e584000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f10, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59174 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2ed83000 ph data[0]=0:2ed83000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e43c000 set TERM ph data[1]=0:2e43c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28703000 ph data[0]=0:28703000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e55c000 set TERM ph data[1]=0:2e55c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f10, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f10, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e5e3000 ph data[0]=0:2e5e3000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e5c4000 set TERM ph data[1]=0:2e5c4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f10, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f10, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f10, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:28718000 ph data[0]=0:28718000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28419000 set TERM ph data[1]=0:28419000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f10, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e600000 ph data[0]=0:2e600000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e519000 set TERM ph data[1]=0:2e519000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2afb1000 ph data[0]=0:2afb1000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:29032000 set TERM ph data[1]=0:29032000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7b0, OrigWordsRequested 0x1900, DevSize 0x19 IdeReadWrite (REQ): Starting sector is 3904e7b0, Number of WORDS 0x1900, DevSize 0x19 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c12000, count 3200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:2e651000 ph data[0]=0:2e651000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2e642000 ph data[1]=0:2e642000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:2e583000 ph data[2]=0:2e583000 (fff) get Phys(data[n=3+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:2e624000 set TERM ph data[3]=0:2e624000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7b0, Count 0x19(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x4, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1900, WordsLeft 1900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3200, full size 3200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e52b000 ph data[0]=0:2e52b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e564000 set TERM ph data[1]=0:2e564000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7d0, OrigWordsRequested 0xa00, DevSize 0xa IdeReadWrite (REQ): Starting sector is 3904e7d0, Number of WORDS 0xa00, DevSize 0xa AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e4a4000 ph data[0]=0:2e4a4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e485000 set TERM ph data[1]=0:2e485000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7d0, Count 0xa(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered a00, WordsLeft a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1400, full size 1400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7e0, OrigWordsRequested 0xa00, DevSize 0xa IdeReadWrite (REQ): Starting sector is 3904e7e0, Number of WORDS 0xa00, DevSize 0xa AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e3fc000 ph data[0]=0:2e3fc000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e4cd000 set TERM ph data[1]=0:2e4cd000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7e0, Count 0xa(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered a00, WordsLeft a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1400, full size 1400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7f0, OrigWordsRequested 0xf00, DevSize 0xf IdeReadWrite (REQ): Starting sector is 3904e7f0, Number of WORDS 0xf00, DevSize 0xf AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e4ac000 ph data[0]=0:2e4ac000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2fa05000 set TERM ph data[1]=0:2fa05000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7f0, Count 0xf(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered f00, WordsLeft f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1e00, full size 1e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e800, OrigWordsRequested 0x2a00, DevSize 0x2a IdeReadWrite (REQ): Starting sector is 3904e800, Number of WORDS 0x2a00, DevSize 0x2a AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c10000, count 5400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:2f9e7000 ph data[0]=0:2f9e7000 (fff) get Phys(data[n=1+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:6fa28000 ph data[1]=0:6fa28000 (fff) get Phys(data[n=2+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:2e3f9000 ph data[2]=0:2e3f9000 (fff) get Phys(data[n=3+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2fa52000 ph data[3]=0:2fa52000 (fff) get Phys(data[n=4+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:2fa03000 ph data[4]=0:2fa03000 (fff) get Phys(data[n=5+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:2f9e4000 set TERM ph data[5]=0:2f9e4000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e800, Count 0x2a(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x6, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2a00, WordsLeft 2a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5400, full size 5400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e830, OrigWordsRequested 0xb00, DevSize 0xb IdeReadWrite (REQ): Starting sector is 3904e830, Number of WORDS 0xb00, DevSize 0xb AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2ee67000 ph data[0]=0:2ee67000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:30720000 set TERM ph data[1]=0:30720000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e830, Count 0xb(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered b00, WordsLeft b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1600, full size 1600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e840, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 3904e840, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:6fa0f000 set TERM ph data[0]=0:6fa0f000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e840, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e850, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 3904e850, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:30707000 ph data[0]=0:30707000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:36aa0000 set TERM ph data[1]=0:36aa0000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e850, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e860, OrigWordsRequested 0x5800, DevSize 0x58 IdeReadWrite (REQ): Starting sector is 3904e860, Number of WORDS 0x5800, DevSize 0x58 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c0a000, count b000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:360a7000 ph data[0]=0:360a7000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:37820000 ph data[1]=0:37820000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:6fa19000 ph data[2]=0:6fa19000 (fff) get Phys(data[n=3+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:360d2000 ph data[3]=0:360d2000 (fff) get Phys(data[n=4+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:360cb000 ph data[4]=0:360cb000 (fff) get Phys(data[n=5+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:360ac000 ph data[5]=0:360ac000 (fff) get Phys(data[n=6+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:36aad000 ph data[6]=0:36aad000 (fff) get Phys(data[n=7+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:36a8e000 ph data[7]=0:36a8e000 (fff) get Phys(data[n=8+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:3609f000 ph data[8]=0:3609f000 (fff) get Phys(data[n=9+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:37818000 ph data[9]=0:37818000 (fff) get Phys(data[n=10+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:6fa11000 set TERM ph data[10]=0:6fa11000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e860, Count 0x58(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0xb, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5800, WordsLeft 5800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered b000, full size b000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f10, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f10, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:36a87000 ph data[0]=0:36a87000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38cb0000 set TERM ph data[1]=0:38cb0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f10, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e8c0, OrigWordsRequested 0xd00, DevSize 0xd IdeReadWrite (REQ): Starting sector is 3904e8c0, Number of WORDS 0xd00, DevSize 0xd AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e48f000 ph data[0]=0:2e48f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e3f8000 set TERM ph data[1]=0:2e3f8000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e8c0, Count 0xd(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered d00, WordsLeft d00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1a00, full size 1a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e8d0, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 3904e8d0, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c12000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:377b7000 ph data[0]=0:377b7000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38d78000 ph data[1]=0:38d78000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:36a99000 set TERM ph data[2]=0:36a99000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e8d0, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x3, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e8f0, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 3904e8f0, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c12000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:38c97000 ph data[0]=0:38c97000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38c50000 ph data[1]=0:38c50000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:37809000 set TERM ph data[2]=0:37809000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e8f0, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x3, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e910, OrigWordsRequested 0xb00, DevSize 0xb IdeReadWrite (REQ): Starting sector is 3904e910, Number of WORDS 0xb00, DevSize 0xb AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:388bf000 ph data[0]=0:388bf000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38c78000 set TERM ph data[1]=0:38c78000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e910, Count 0xb(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered b00, WordsLeft b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1600, full size 1600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e920, OrigWordsRequested 0xb00, DevSize 0xb IdeReadWrite (REQ): Starting sector is 3904e920, Number of WORDS 0xb00, DevSize 0xb AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38d57000 ph data[0]=0:38d57000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38b70000 set TERM ph data[1]=0:38b70000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e920, Count 0xb(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered b00, WordsLeft b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1600, full size 1600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e930, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e930, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38c2f000 ph data[0]=0:38c2f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38ba0000 set TERM ph data[1]=0:38ba0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e930, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e940, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904e940, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:388df000 ph data[0]=0:388df000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:38bd8000 ph data[1]=0:38bd8000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:38d59000 ph data[2]=0:38d59000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:388da000 ph data[3]=0:388da000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:38c7b000 ph data[4]=0:38c7b000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:38b64000 ph data[5]=0:38b64000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:38bf5000 ph data[6]=0:38bf5000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:38b8e000 ph data[7]=0:38b8e000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:388d7000 ph data[8]=0:388d7000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:38bd0000 ph data[9]=0:38bd0000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:38d51000 ph data[10]=0:38d51000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:38c22000 ph data[11]=0:38c22000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:38c73000 ph data[12]=0:38c73000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:38b5c000 ph data[13]=0:38b5c000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:38b85000 ph data[14]=0:38b85000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:38b86000 set TERM ph data[14]=0:38b85000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e940, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0xf, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e9c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904e9c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:38c17000 ph data[0]=0:38c17000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:38bc8000 ph data[1]=0:38bc8000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:38c69000 ph data[2]=0:38c69000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:38c12000 ph data[3]=0:38c12000 (fff) get Phys(data[n=4+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:38c6b000 ph data[4]=0:38c6b000 (fff) get Phys(data[n=5+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:38b54000 ph data[5]=0:38b54000 (fff) get Phys(data[n=6+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:38b7d000 ph data[6]=0:38b7d000 (fff) get Phys(data[n=7+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:388fe000 ph data[7]=0:388fe000 (fff) get Phys(data[n=8+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:38c0f000 ph data[8]=0:38c0f000 (fff) get Phys(data[n=9+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:38bc0000 ph data[9]=0:38bc0000 (fff) get Phys(data[n=10+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:38c61000 ph data[10]=0:38c61000 (fff) get Phys(data[n=11+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:38b92000 ph data[11]=0:38b92000 (fff) get Phys(data[n=12+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:388eb000 ph data[12]=0:388eb000 (fff) get Phys(data[n=13+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:38bbc000 ph data[13]=0:38bbc000 (fff) get Phys(data[n=14+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:38b75000 ph data[14]=0:38b75000 (fff) get Phys(data[n=15+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:388f6000 set TERM ph data[15]=0:388f6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b590b4 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e9c0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ea40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904ea40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:388ef000 ph data[0]=0:388ef000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:38bb8000 ph data[1]=0:38bb8000 (fff) get Phys(data[n=2+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:38c59000 ph data[2]=0:38c59000 (fff) get Phys(data[n=3+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:38b8a000 ph data[3]=0:38b8a000 (fff) get Phys(data[n=4+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:388e3000 ph data[4]=0:388e3000 (fff) get Phys(data[n=5+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:38bb4000 ph data[5]=0:38bb4000 (fff) get Phys(data[n=6+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:38b6d000 ph data[6]=0:38b6d000 (fff) get Phys(data[n=7+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:38bee000 ph data[7]=0:38bee000 (fff) get Phys(data[n=8+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:38b7f000 ph data[8]=0:38b7f000 (fff) get Phys(data[n=9+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:388f0000 ph data[9]=0:388f0000 (fff) get Phys(data[n=10+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:38c51000 ph data[10]=0:38c51000 (fff) get Phys(data[n=11+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:38b82000 ph data[11]=0:38b82000 (fff) get Phys(data[n=12+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:388db000 ph data[12]=0:388db000 (fff) get Phys(data[n=13+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:38bac000 ph data[13]=0:38bac000 (fff) get Phys(data[n=14+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:38b65000 ph data[14]=0:38b65000 (fff) get Phys(data[n=15+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:38be6000 set TERM ph data[15]=0:38be6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ea40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eac0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904eac0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:38b77000 ph data[0]=0:38b77000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:38b18000 ph data[1]=0:38b18000 (fff) get Phys(data[n=2+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:38c49000 ph data[2]=0:38c49000 (fff) get Phys(data[n=3+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:38b7a000 ph data[3]=0:38b7a000 (fff) get Phys(data[n=4+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:38c0b000 ph data[4]=0:38c0b000 (fff) get Phys(data[n=5+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:38ba4000 ph data[5]=0:38ba4000 (fff) get Phys(data[n=6+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:38b5d000 ph data[6]=0:38b5d000 (fff) get Phys(data[n=7+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:38bde000 ph data[7]=0:38bde000 (fff) get Phys(data[n=8+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:38b6f000 ph data[8]=0:38b6f000 (fff) get Phys(data[n=9+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:38b10000 ph data[9]=0:38b10000 (fff) get Phys(data[n=10+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:38c41000 ph data[10]=0:38c41000 (fff) get Phys(data[n=11+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:38b72000 ph data[11]=0:38b72000 (fff) get Phys(data[n=12+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:38bfb000 ph data[12]=0:38bfb000 (fff) get Phys(data[n=13+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:38b9c000 ph data[13]=0:38b9c000 (fff) get Phys(data[n=14+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:38b55000 ph data[14]=0:38b55000 (fff) get Phys(data[n=15+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:38bd6000 set TERM ph data[15]=0:38bd6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eac0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eb40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904eb40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bfe000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:38b67000 ph data[0]=0:38b67000 (fff) get Phys(data[n=1+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:38b08000 ph data[1]=0:38b08000 (fff) get Phys(data[n=2+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:38c31000 ph data[2]=0:38c31000 (fff) get Phys(data[n=3+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:38b6a000 ph data[3]=0:38b6a000 (fff) get Phys(data[n=4+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:38b8b000 ph data[4]=0:38b8b000 (fff) get Phys(data[n=5+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:38b94000 ph data[5]=0:38b94000 (fff) get Phys(data[n=6+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:38b4d000 ph data[6]=0:38b4d000 (fff) get Phys(data[n=7+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:38bce000 ph data[7]=0:38bce000 (fff) get Phys(data[n=8+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:38b5f000 ph data[8]=0:38b5f000 (fff) get Phys(data[n=9+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:38b00000 ph data[9]=0:38b00000 (fff) get Phys(data[n=10+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:38c91000 ph data[10]=0:38c91000 (fff) get Phys(data[n=11+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:38b62000 ph data[11]=0:38b62000 (fff) get Phys(data[n=12+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38b83000 ph data[12]=0:38b83000 (fff) get Phys(data[n=13+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38904000 ph data[13]=0:38904000 (fff) get Phys(data[n=14+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38bb5000 ph data[14]=0:38bb5000 (fff) get Phys(data[n=15+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:38bc6000 set TERM ph data[15]=0:38bc6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eb40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ebc0, OrigWordsRequested 0x3900, DevSize 0x39 IdeReadWrite (REQ): Starting sector is 3904ebc0, Number of WORDS 0x3900, DevSize 0x39 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c0e000, count 7200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:38b57000 ph data[0]=0:38b57000 (fff) get Phys(data[n=1+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:38af8000 ph data[1]=0:38af8000 (fff) get Phys(data[n=2+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:38c89000 ph data[2]=0:38c89000 (fff) get Phys(data[n=3+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:3890a000 ph data[3]=0:3890a000 (fff) get Phys(data[n=4+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:38b7b000 ph data[4]=0:38b7b000 (fff) get Phys(data[n=5+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:388fc000 ph data[5]=0:388fc000 (fff) get Phys(data[n=6+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:38bad000 ph data[6]=0:38bad000 (fff) get Phys(data[n=7+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:38bbe000 set TERM ph data[7]=0:38bbe000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69190 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ebc0, Count 0x39(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x8, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3900, WordsLeft 3900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 7200, full size 7200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ec00, OrigWordsRequested 0x1400, DevSize 0x14 IdeReadWrite (REQ): Starting sector is 3904ec00, Number of WORDS 0x1400, DevSize 0x14 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c12000, count 2800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:38bc7000 ph data[0]=0:38bc7000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38a60000 ph data[1]=0:38a60000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:38bb9000 set TERM ph data[2]=0:38bb9000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ec00, Count 0x14(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x3, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1400, WordsLeft 1400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2800, full size 2800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38aef000 ph data[0]=0:38aef000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38a90000 set TERM ph data[1]=0:38a90000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ec20, OrigWordsRequested 0x1600, DevSize 0x16 IdeReadWrite (REQ): Starting sector is 3904ec20, Number of WORDS 0x1600, DevSize 0x16 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c12000, count 2c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:2e487000 ph data[0]=0:2e487000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2e4e0000 ph data[1]=0:2e4e0000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:2e559000 set TERM ph data[2]=0:2e559000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ec20, Count 0x16(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x3, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1600, WordsLeft 1600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2c00, full size 2c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f10, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f10, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38a57000 ph data[0]=0:38a57000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38a00000 set TERM ph data[1]=0:38a00000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f10, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ec40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904ec40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bf2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:2e5a7000 ph data[0]=0:2e5a7000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:2ed80000 ph data[1]=0:2ed80000 (fff) get Phys(data[n=2+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:2e611000 ph data[2]=0:2e611000 (fff) get Phys(data[n=3+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:2e5fa000 ph data[3]=0:2e5fa000 (fff) get Phys(data[n=4+1000]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:2e5cb000 ph data[4]=0:2e5cb000 (fff) get Phys(data[n=5+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:2e5bc000 ph data[5]=0:2e5bc000 (fff) get Phys(data[n=6+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:2e5a5000 ph data[6]=0:2e5a5000 (fff) get Phys(data[n=7+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:2eda6000 ph data[7]=0:2eda6000 (fff) get Phys(data[n=8+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:38a87000 ph data[8]=0:38a87000 (fff) get Phys(data[n=9+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:38a28000 ph data[9]=0:38a28000 (fff) get Phys(data[n=10+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:38919000 ph data[10]=0:38919000 (fff) get Phys(data[n=11+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:38942000 ph data[11]=0:38942000 (fff) get Phys(data[n=12+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:2e5db000 ph data[12]=0:2e5db000 (fff) get Phys(data[n=13+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:38ab4000 ph data[13]=0:38ab4000 (fff) get Phys(data[n=14+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:38add000 ph data[14]=0:38add000 (fff) get Phys(data[n=15+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:38966000 set TERM ph data[15]=0:38966000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ec40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ecc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904ecc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c02000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:3893f000 ph data[0]=0:3893f000 (fff) get Phys(data[n=1+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:38a20000 ph data[1]=0:38a20000 (fff) get Phys(data[n=2+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:38911000 ph data[2]=0:38911000 (fff) get Phys(data[n=3+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:3893a000 ph data[3]=0:3893a000 (fff) get Phys(data[n=4+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:38aa3000 ph data[4]=0:38aa3000 (fff) get Phys(data[n=5+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:38a14000 ph data[5]=0:38a14000 (fff) get Phys(data[n=6+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:38ad5000 ph data[6]=0:38ad5000 (fff) get Phys(data[n=7+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:3895e000 ph data[7]=0:3895e000 (fff) get Phys(data[n=8+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38937000 ph data[8]=0:38937000 (fff) get Phys(data[n=9+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38958000 ph data[9]=0:38958000 (fff) get Phys(data[n=10+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38a89000 ph data[10]=0:38a89000 (fff) get Phys(data[n=11+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:38afa000 ph data[11]=0:38afa000 (fff) get Phys(data[n=12+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:38a9b000 ph data[12]=0:38a9b000 (fff) get Phys(data[n=13+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:38a0c000 ph data[13]=0:38a0c000 (fff) get Phys(data[n=14+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:38acd000 ph data[14]=0:38acd000 (fff) get Phys(data[n=15+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:38a46000 set TERM ph data[15]=0:38a46000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ed40, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 3904ed40, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c12000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:38ae7000 ph data[0]=0:38ae7000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38950000 ph data[1]=0:38950000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:38a81000 ph data[2]=0:38a81000 (fff) get Phys(data[n=3+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:38af2000 set TERM ph data[3]=0:38af2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ecc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e55d00 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68fb8 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ed40, Count 0x20(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55d00, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55d00 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ed60, OrigWordsRequested 0x8600, DevSize 0x86 IdeReadWrite (REQ): Starting sector is 3904ed60, Number of WORDS 0x8600, DevSize 0x86 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c04000, count 10c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:38a07000 ph data[0]=0:38a07000 (fff) get Phys(data[n=1+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:389a8000 ph data[1]=0:389a8000 (fff) get Phys(data[n=2+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:38aa1000 ph data[2]=0:38aa1000 (fff) get Phys(data[n=3+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:38a02000 ph data[3]=0:38a02000 (fff) get Phys(data[n=4+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:38ac3000 ph data[4]=0:38ac3000 (fff) get Phys(data[n=5+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:38a24000 ph data[5]=0:38a24000 (fff) get Phys(data[n=6+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38965000 ph data[6]=0:38965000 (fff) get Phys(data[n=7+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38cee000 ph data[7]=0:38cee000 (fff) get Phys(data[n=8+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:389ff000 ph data[8]=0:389ff000 (fff) get Phys(data[n=9+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:389a0000 ph data[9]=0:389a0000 (fff) get Phys(data[n=10+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:38a99000 ph data[10]=0:38a99000 (fff) get Phys(data[n=11+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:389fa000 ph data[11]=0:389fa000 (fff) get Phys(data[n=12+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:38abb000 ph data[12]=0:38abb000 (fff) get Phys(data[n=13+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:38a1c000 ph data[13]=0:38a1c000 (fff) get Phys(data[n=14+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:3895d000 ph data[14]=0:3895d000 (fff) get Phys(data[n=15+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38ce6000 ph data[15]=0:38ce6000 (fff) get Phys(data[n=16+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:389f7000 set TERM ph data[16]=0:389f7000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ed60, Count 0x86(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x11, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8600, WordsLeft 8600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10c00, full size 10c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904edf0, OrigWordsRequested 0x600, DevSize 0x6 IdeReadWrite (REQ): Starting sector is 3904edf0, Number of WORDS 0x600, DevSize 0x6 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38a27000 set TERM ph data[0]=0:38a27000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904edf0, Count 0x6(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 600, WordsLeft 600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered c00, full size c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ee00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904ee00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c04000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:38cef000 ph data[0]=0:38cef000 (fff) get Phys(data[n=1+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:3b360000 ph data[1]=0:3b360000 (fff) get Phys(data[n=2+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:38969000 ph data[2]=0:38969000 (fff) get Phys(data[n=3+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:38cda000 ph data[3]=0:38cda000 (fff) get Phys(data[n=4+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:38d03000 ph data[4]=0:38d03000 (fff) get Phys(data[n=5+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:38974000 ph data[5]=0:38974000 (fff) get Phys(data[n=6+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:389ad000 ph data[6]=0:389ad000 (fff) get Phys(data[n=7+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:389be000 ph data[7]=0:389be000 (fff) get Phys(data[n=8+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38ce7000 ph data[8]=0:38ce7000 (fff) get Phys(data[n=9+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:3b358000 ph data[9]=0:3b358000 (fff) get Phys(data[n=10+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:38961000 ph data[10]=0:38961000 (fff) get Phys(data[n=11+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:38cd2000 ph data[11]=0:38cd2000 (fff) get Phys(data[n=12+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:38cfb000 ph data[12]=0:38cfb000 (fff) get Phys(data[n=13+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:389e4000 ph data[13]=0:389e4000 (fff) get Phys(data[n=14+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:389a5000 ph data[14]=0:389a5000 (fff) get Phys(data[n=15+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:389b6000 set TERM ph data[15]=0:389b6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ee00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ee80, OrigWordsRequested 0x900, DevSize 0x9 IdeReadWrite (REQ): Starting sector is 3904ee80, Number of WORDS 0x900, DevSize 0x9 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c14000, count 1200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:38cdf000 ph data[0]=0:38cdf000 (fff) get Phys(data[n=1+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:3b350000 set TERM ph data[1]=0:3b350000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e55d00 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68734 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ee80, Count 0x9(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 900, WordsLeft 900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1200, full size 1200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55d00, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55d00 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38977000 ph data[0]=0:38977000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3bda8000 set TERM ph data[1]=0:3bda8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e58f000 ph data[0]=0:2e58f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e440000 set TERM ph data[1]=0:2e440000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b685f8 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2eda7000 ph data[0]=0:2eda7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e430000 set TERM ph data[1]=0:2e430000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ee90, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 3904ee90, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2ed9f000 ph data[0]=0:2ed9f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e428000 set TERM ph data[1]=0:2e428000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ee90, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eea0, OrigWordsRequested 0x3300, DevSize 0x33 IdeReadWrite (REQ): Starting sector is 3904eea0, Number of WORDS 0x3300, DevSize 0x33 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c0e000, count 6600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:3bd97000 ph data[0]=0:3bd97000 (fff) get Phys(data[n=1+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:3f6e8000 ph data[1]=0:3f6e8000 (fff) get Phys(data[n=2+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:3b359000 ph data[2]=0:3b359000 (fff) get Phys(data[n=3+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:3b2f2000 ph data[3]=0:3b2f2000 (fff) get Phys(data[n=4+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:3bdb3000 ph data[4]=0:3bdb3000 (fff) get Phys(data[n=5+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:3ecac000 ph data[5]=0:3ecac000 (fff) get Phys(data[n=6+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:3c4fd000 set TERM ph data[6]=0:3c4fd000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eea0, Count 0x33(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x7, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3300, WordsLeft 3300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 6600, full size 6600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eee0, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 3904eee0, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3d817000 set TERM ph data[0]=0:3d817000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eee0, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eef0, OrigWordsRequested 0x700, DevSize 0x7 IdeReadWrite (REQ): Starting sector is 3904eef0, Number of WORDS 0x700, DevSize 0x7 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f6f7000 set TERM ph data[0]=0:3f6f7000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eef0, Count 0x7(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 700, WordsLeft 700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e00, full size e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef00, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 3904ef00, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f6e7000 ph data[0]=0:3f6e7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f710000 set TERM ph data[1]=0:3f710000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef00, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef10, OrigWordsRequested 0xf00, DevSize 0xf IdeReadWrite (REQ): Starting sector is 3904ef10, Number of WORDS 0xf00, DevSize 0xf AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f6cf000 ph data[0]=0:3f6cf000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f758000 set TERM ph data[1]=0:3f758000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef10, Count 0xf(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered f00, WordsLeft f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1e00, full size 1e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef20, OrigWordsRequested 0x700, DevSize 0x7 IdeReadWrite (REQ): Starting sector is 3904ef20, Number of WORDS 0x700, DevSize 0x7 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f717000 set TERM ph data[0]=0:3f717000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef20, Count 0x7(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x1, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 700, WordsLeft 700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e00, full size e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f707000 ph data[0]=0:3f707000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f730000 set TERM ph data[1]=0:3f730000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef30, OrigWordsRequested 0x4200, DevSize 0x42 IdeReadWrite (REQ): Starting sector is 3904ef30, Number of WORDS 0x4200, DevSize 0x42 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c0c000, count 8400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38c77000 ph data[0]=0:38c77000 (fff) get Phys(data[n=1+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:38900000 ph data[1]=0:38900000 (fff) get Phys(data[n=2+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:38d79000 ph data[2]=0:38d79000 (fff) get Phys(data[n=3+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:38c72000 ph data[3]=0:38c72000 (fff) get Phys(data[n=4+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:38c33000 ph data[4]=0:38c33000 (fff) get Phys(data[n=5+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:38b84000 ph data[5]=0:38b84000 (fff) get Phys(data[n=6+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:388dd000 ph data[6]=0:388dd000 (fff) get Phys(data[n=7+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38bae000 ph data[7]=0:38bae000 (fff) get Phys(data[n=8+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:38c7f000 set TERM ph data[8]=0:38c7f000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef30, Count 0x42(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x9, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4200, WordsLeft 4200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8400, full size 8400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:287b7000 ph data[0]=0:287b7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e568000 set TERM ph data[1]=0:2e568000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x2, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6778030 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6bf2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:3f70f000 ph data[0]=0:3f70f000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:3f840000 ph data[1]=0:3f840000 (fff) get Phys(data[n=2+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:3f891000 ph data[2]=0:3f891000 (fff) get Phys(data[n=3+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:3f772000 ph data[3]=0:3f772000 (fff) get Phys(data[n=4+1000]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:3f8c3000 ph data[4]=0:3f8c3000 (fff) get Phys(data[n=5+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:3f74c000 ph data[5]=0:3f74c000 (fff) get Phys(data[n=6+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:3f785000 ph data[6]=0:3f785000 (fff) get Phys(data[n=7+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:3f856000 ph data[7]=0:3f856000 (fff) get Phys(data[n=8+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:3f897000 ph data[8]=0:3f897000 (fff) get Phys(data[n=9+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:3f848000 ph data[9]=0:3f848000 (fff) get Phys(data[n=10+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:3f6c9000 ph data[10]=0:3f6c9000 (fff) get Phys(data[n=11+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:3f77a000 ph data[11]=0:3f77a000 (fff) get Phys(data[n=12+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:3f8cb000 ph data[12]=0:3f8cb000 (fff) get Phys(data[n=13+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:3f754000 ph data[13]=0:3f754000 (fff) get Phys(data[n=14+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:3f705000 ph data[14]=0:3f705000 (fff) get Phys(data[n=15+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:3f85e000 set TERM ph data[15]=0:3f85e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c660, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c02000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:3f89f000 ph data[0]=0:3f89f000 (fff) get Phys(data[n=1+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:3f850000 ph data[1]=0:3f850000 (fff) get Phys(data[n=2+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:3f6d1000 ph data[2]=0:3f6d1000 (fff) get Phys(data[n=3+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:3f782000 ph data[3]=0:3f782000 (fff) get Phys(data[n=4+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:3f71b000 ph data[4]=0:3f71b000 (fff) get Phys(data[n=5+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:3f75c000 ph data[5]=0:3f75c000 (fff) get Phys(data[n=6+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:3f70d000 ph data[6]=0:3f70d000 (fff) get Phys(data[n=7+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:3f736000 ph data[7]=0:3f736000 (fff) get Phys(data[n=8+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:3f8a7000 ph data[8]=0:3f8a7000 (fff) get Phys(data[n=9+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:3f858000 ph data[9]=0:3f858000 (fff) get Phys(data[n=10+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:3f6d9000 ph data[10]=0:3f6d9000 (fff) get Phys(data[n=11+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:3f78a000 ph data[11]=0:3f78a000 (fff) get Phys(data[n=12+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:3f723000 ph data[12]=0:3f723000 (fff) get Phys(data[n=13+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:3f764000 ph data[13]=0:3f764000 (fff) get Phys(data[n=14+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:3f895000 ph data[14]=0:3f895000 (fff) get Phys(data[n=15+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:3f73e000 set TERM ph data[15]=0:3f73e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960c760, OrigWordsRequested 0x1c00, DevSize 0x1c IdeReadWrite (REQ): Starting sector is 3960c760, Number of WORDS 0x1c00, DevSize 0x1c AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c12000, count 3800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:3f8af000 ph data[0]=0:3f8af000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:3f860000 ph data[1]=0:3f860000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:3f929000 ph data[2]=0:3f929000 (fff) get Phys(data[n=3+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:3f70a000 set TERM ph data[3]=0:3f70a000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef80, OrigWordsRequested 0x1a00, DevSize 0x1a IdeReadWrite (REQ): Starting sector is 3904ef80, Number of WORDS 0x1a00, DevSize 0x1a AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6bce000, count 3400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:3f867000 ph data[0]=0:3f867000 (fff) get Phys(data[n=1+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:3f748000 ph data[1]=0:3f748000 (fff) get Phys(data[n=2+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:3f949000 ph data[2]=0:3f949000 (fff) get Phys(data[n=3+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:3f8b2000 set TERM ph data[3]=0:3f8b2000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:389b7000 ph data[0]=0:389b7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3d7c8000 set TERM ph data[1]=0:3d7c8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e55d00 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c6e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55d00, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55d00 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c760, Count 0x1c(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x4, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1c00, WordsLeft 1c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3800, full size 3800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e44930 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa944 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef80, Count 0x1a(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x4, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1a00, WordsLeft 1a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3400, full size 3400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa930 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e44930 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904efa0, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 3904efa0, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c12000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:38c4f000 ph data[0]=0:38c4f000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38b50000 ph data[1]=0:38b50000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:38d39000 set TERM ph data[2]=0:38d39000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904efa0, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x3, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e44930 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2afbf000 ph data[0]=0:2afbf000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e570000 set TERM ph data[1]=0:2e570000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e44930 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904efc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904efc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bfc000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:3f877000 ph data[0]=0:3f877000 (fff) get Phys(data[n=1+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:3f798000 ph data[1]=0:3f798000 (fff) get Phys(data[n=2+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:3f6e9000 ph data[2]=0:3f6e9000 (fff) get Phys(data[n=3+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:3f8c2000 ph data[3]=0:3f8c2000 (fff) get Phys(data[n=4+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:3f6cb000 ph data[4]=0:3f6cb000 (fff) get Phys(data[n=5+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:3f894000 ph data[5]=0:3f894000 (fff) get Phys(data[n=6+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:3f71d000 ph data[6]=0:3f71d000 (fff) get Phys(data[n=7+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:3f74e000 ph data[7]=0:3f74e000 (fff) get Phys(data[n=8+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:3f86f000 ph data[8]=0:3f86f000 (fff) get Phys(data[n=9+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:3f790000 ph data[9]=0:3f790000 (fff) get Phys(data[n=10+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:3f6e1000 ph data[10]=0:3f6e1000 (fff) get Phys(data[n=11+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:3f8ba000 ph data[11]=0:3f8ba000 (fff) get Phys(data[n=12+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:3f893000 ph data[12]=0:3f893000 (fff) get Phys(data[n=13+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:3f70c000 ph data[13]=0:3f70c000 (fff) get Phys(data[n=14+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:3f715000 ph data[14]=0:3f715000 (fff) get Phys(data[n=15+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:3f82e000 set TERM ph data[15]=0:3f82e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904efc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677a060 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f040, OrigWordsRequested 0x4600, DevSize 0x46 IdeReadWrite (REQ): Starting sector is 3904f040, Number of WORDS 0x4600, DevSize 0x46 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c0c000, count 8c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:3f867000 ph data[0]=0:3f867000 (fff) get Phys(data[n=1+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:3f748000 ph data[1]=0:3f748000 (fff) get Phys(data[n=2+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:3f949000 ph data[2]=0:3f949000 (fff) get Phys(data[n=3+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:3f8b2000 ph data[3]=0:3f8b2000 (fff) get Phys(data[n=4+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:3f88b000 ph data[4]=0:3f88b000 (fff) get Phys(data[n=5+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:3f704000 ph data[5]=0:3f704000 (fff) get Phys(data[n=6+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:3f8bd000 ph data[6]=0:3f8bd000 (fff) get Phys(data[n=7+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:3f826000 ph data[7]=0:3f826000 (fff) get Phys(data[n=8+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:3f6d7000 set TERM ph data[8]=0:3f6d7000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f80 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f040, Count 0x46(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x9, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4600, WordsLeft 4600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8c00, full size 8c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f090, OrigWordsRequested 0x500, DevSize 0x5 IdeReadWrite (REQ): Starting sector is 3904f090, Number of WORDS 0x500, DevSize 0x5 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f91b000 set TERM ph data[0]=0:3f91b000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f090, Count 0x5(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x1, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 500, WordsLeft 500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a00, full size a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f0a0, OrigWordsRequested 0xf00, DevSize 0xf IdeReadWrite (REQ): Starting sector is 3904f0a0, Number of WORDS 0xf00, DevSize 0xf AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f8e3000 ph data[0]=0:3f8e3000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f8f4000 set TERM ph data[1]=0:3f8f4000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f0a0, Count 0xf(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered f00, WordsLeft f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1e00, full size 1e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 fixme:(dll/win32/comctl32/toolbar.c:394) [000200A0] TBSTYLE_REGISTERDROP not implemented TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb677a060, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb677a060 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb677a060 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f10, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f10, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677a060: cmd aligned b677a100, d=40 ahci_cmd_ptr 0xb677a100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677a100) AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3b2f3000 ph data[0]=0:3b2f3000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f8cc000 set TERM ph data[1]=0:3f8cc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677a100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f10, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060 AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100) prd_length 0x2, flags 0x5, base 8e3d100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f9143c, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f9143c, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:00f3e000 ph data[0]=0:f3e000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:00f3f000 ph data[0]=0:f3e000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:00f18000 ph data[1]=0:f18000 (fff) get Phys(data[n=2+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:00f21000 ph data[2]=0:f21000 (fff) get Phys(data[n=3+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:00f2a000 ph data[3]=0:f2a000 (fff) get Phys(data[n=4+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:00f33000 ph data[4]=0:f33000 (fff) get Phys(data[n=5+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:00f34000 ph data[4]=0:f33000 (1fff) get Phys(data[n=5+2000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:00f35000 ph data[4]=0:f33000 (2fff) get Phys(data[n=5+3000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:00f36000 ph data[4]=0:f33000 (3fff) get Phys(data[n=5+4000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:00f37000 ph data[4]=0:f33000 (4fff) get Phys(data[n=5+5000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:00f10000 ph data[5]=0:f10000 (fff) get Phys(data[n=6+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:00f19000 ph data[6]=0:f19000 (fff) get Phys(data[n=7+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:00f22000 ph data[7]=0:f22000 (fff) get Phys(data[n=8+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:00f2b000 ph data[8]=0:f2b000 (fff) get Phys(data[n=9+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:00f2c000 ph data[8]=0:f2b000 (1fff) get Phys(data[n=9+2000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:00f2d000 set TERM ph data[8]=0:f2b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f914bc, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f914bc, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:00f2e000 ph data[0]=0:f2e000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:00f2f000 ph data[0]=0:f2e000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:00f08000 ph data[1]=0:f08000 (fff) get Phys(data[n=2+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:00f11000 ph data[2]=0:f11000 (fff) get Phys(data[n=3+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:00f1a000 ph data[3]=0:f1a000 (fff) get Phys(data[n=4+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:00f23000 ph data[4]=0:f23000 (fff) get Phys(data[n=5+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:00f24000 ph data[4]=0:f23000 (1fff) get Phys(data[n=5+2000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:00f25000 ph data[4]=0:f23000 (2fff) get Phys(data[n=5+3000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:00f26000 ph data[4]=0:f23000 (3fff) get Phys(data[n=5+4000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:00f27000 ph data[4]=0:f23000 (4fff) get Phys(data[n=5+5000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:00f00000 ph data[5]=0:f00000 (fff) get Phys(data[n=6+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:00f09000 ph data[6]=0:f09000 (fff) get Phys(data[n=7+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:00f12000 ph data[7]=0:f12000 (fff) get Phys(data[n=8+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:00f1b000 ph data[8]=0:f1b000 (fff) get Phys(data[n=9+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:00f1c000 ph data[8]=0:f1b000 (1fff) get Phys(data[n=9+2000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:00f1d000 set TERM ph data[8]=0:f1b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f9153c, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f9153c, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:00f1e000 ph data[0]=0:f1e000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:00f1f000 ph data[0]=0:f1e000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:00ef8000 ph data[1]=0:ef8000 (fff) get Phys(data[n=2+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:00f01000 ph data[2]=0:f01000 (fff) get Phys(data[n=3+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:00f0a000 ph data[3]=0:f0a000 (fff) get Phys(data[n=4+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:00f13000 ph data[4]=0:f13000 (fff) get Phys(data[n=5+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:00f14000 ph data[4]=0:f13000 (1fff) get Phys(data[n=5+2000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:00f15000 ph data[4]=0:f13000 (2fff) get Phys(data[n=5+3000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:00f16000 ph data[4]=0:f13000 (3fff) get Phys(data[n=5+4000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:00f17000 ph data[4]=0:f13000 (4fff) get Phys(data[n=5+5000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:00ef0000 ph data[5]=0:ef0000 (fff) get Phys(data[n=6+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:00ef9000 ph data[6]=0:ef9000 (fff) get Phys(data[n=7+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:00f02000 ph data[7]=0:f02000 (fff) get Phys(data[n=8+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:00f0b000 ph data[8]=0:f0b000 (fff) get Phys(data[n=9+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:00f0c000 ph data[8]=0:f0b000 (1fff) get Phys(data[n=9+2000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:00f0d000 set TERM ph data[8]=0:f0b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f915bc, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f915bc, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:00f0e000 ph data[0]=0:f0e000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:00f0f000 ph data[0]=0:f0e000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:00ee8000 ph data[1]=0:ee8000 (fff) get Phys(data[n=2+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:00ef1000 ph data[2]=0:ef1000 (fff) get Phys(data[n=3+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:00efa000 ph data[3]=0:efa000 (fff) get Phys(data[n=4+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:00f03000 ph data[4]=0:f03000 (fff) get Phys(data[n=5+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:00f04000 ph data[4]=0:f03000 (1fff) get Phys(data[n=5+2000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:00f05000 ph data[4]=0:f03000 (2fff) get Phys(data[n=5+3000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:00f06000 ph data[4]=0:f03000 (3fff) get Phys(data[n=5+4000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:00f07000 ph data[4]=0:f03000 (4fff) get Phys(data[n=5+5000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:00ee0000 ph data[5]=0:ee0000 (fff) get Phys(data[n=6+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:00ee9000 ph data[6]=0:ee9000 (fff) get Phys(data[n=7+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:00ef2000 ph data[7]=0:ef2000 (fff) get Phys(data[n=8+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:00efb000 ph data[8]=0:efb000 (fff) get Phys(data[n=9+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:00efc000 ph data[8]=0:efb000 (1fff) get Phys(data[n=9+2000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:00efd000 set TERM ph data[8]=0:efb000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26c08, CDB 0xb5e26c38, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93c1e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93c1e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:00f3e000 ph data[0]=0:f3e000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:00f3f000 ph data[0]=0:f3e000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:00f18000 ph data[1]=0:f18000 (fff) get Phys(data[n=2+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:00f21000 ph data[2]=0:f21000 (fff) get Phys(data[n=3+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:00f2a000 ph data[3]=0:f2a000 (fff) get Phys(data[n=4+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:00f33000 ph data[4]=0:f33000 (fff) get Phys(data[n=5+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:00f34000 ph data[4]=0:f33000 (1fff) get Phys(data[n=5+2000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:00f35000 ph data[4]=0:f33000 (2fff) get Phys(data[n=5+3000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:00f36000 ph data[4]=0:f33000 (3fff) get Phys(data[n=5+4000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:00f37000 ph data[4]=0:f33000 (4fff) get Phys(data[n=5+5000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:00f10000 ph data[5]=0:f10000 (fff) get Phys(data[n=6+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:00f19000 ph data[6]=0:f19000 (fff) get Phys(data[n=7+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:00f22000 ph data[7]=0:f22000 (fff) get Phys(data[n=8+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:00f2b000 ph data[8]=0:f2b000 (fff) get Phys(data[n=9+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:00f2c000 ph data[8]=0:f2b000 (1fff) get Phys(data[n=9+2000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:00f2d000 set TERM ph data[8]=0:f2b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e26c08 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93c9e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93c9e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:00f2e000 ph data[0]=0:f2e000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:00f2f000 ph data[0]=0:f2e000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:00f08000 ph data[1]=0:f08000 (fff) get Phys(data[n=2+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:00f11000 ph data[2]=0:f11000 (fff) get Phys(data[n=3+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:00f1a000 ph data[3]=0:f1a000 (fff) get Phys(data[n=4+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:00f23000 ph data[4]=0:f23000 (fff) get Phys(data[n=5+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:00f24000 ph data[4]=0:f23000 (1fff) get Phys(data[n=5+2000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:00f25000 ph data[4]=0:f23000 (2fff) get Phys(data[n=5+3000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:00f26000 ph data[4]=0:f23000 (3fff) get Phys(data[n=5+4000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:00f27000 ph data[4]=0:f23000 (4fff) get Phys(data[n=5+5000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:00f00000 ph data[5]=0:f00000 (fff) get Phys(data[n=6+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:00f09000 ph data[6]=0:f09000 (fff) get Phys(data[n=7+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:00f12000 ph data[7]=0:f12000 (fff) get Phys(data[n=8+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:00f1b000 ph data[8]=0:f1b000 (fff) get Phys(data[n=9+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:00f1c000 ph data[8]=0:f1b000 (1fff) get Phys(data[n=9+2000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:00f1d000 set TERM ph data[8]=0:f1b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d468, CDB 0xb5e1d498, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93d1e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93d1e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:00f1e000 ph data[0]=0:f1e000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:00f1f000 ph data[0]=0:f1e000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:00ef8000 ph data[1]=0:ef8000 (fff) get Phys(data[n=2+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:00f01000 ph data[2]=0:f01000 (fff) get Phys(data[n=3+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:00f0a000 ph data[3]=0:f0a000 (fff) get Phys(data[n=4+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:00f13000 ph data[4]=0:f13000 (fff) get Phys(data[n=5+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:00f14000 ph data[4]=0:f13000 (1fff) get Phys(data[n=5+2000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:00f15000 ph data[4]=0:f13000 (2fff) get Phys(data[n=5+3000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:00f16000 ph data[4]=0:f13000 (3fff) get Phys(data[n=5+4000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:00f17000 ph data[4]=0:f13000 (4fff) get Phys(data[n=5+5000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:00ef0000 ph data[5]=0:ef0000 (fff) get Phys(data[n=6+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:00ef9000 ph data[6]=0:ef9000 (fff) get Phys(data[n=7+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:00f02000 ph data[7]=0:f02000 (fff) get Phys(data[n=8+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:00f0b000 ph data[8]=0:f0b000 (fff) get Phys(data[n=9+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:00f0c000 ph data[8]=0:f0b000 (1fff) get Phys(data[n=9+2000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:00f0d000 set TERM ph data[8]=0:f0b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e1d468 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1c300, CDB 0xb5e1c330, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=8 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93d9e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93d9e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:00f0e000 ph data[0]=0:f0e000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:00f0f000 ph data[0]=0:f0e000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:00ee8000 ph data[1]=0:ee8000 (fff) get Phys(data[n=2+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:00ef1000 ph data[2]=0:ef1000 (fff) get Phys(data[n=3+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:00efa000 ph data[3]=0:efa000 (fff) get Phys(data[n=4+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:00f03000 ph data[4]=0:f03000 (fff) get Phys(data[n=5+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:00f04000 ph data[4]=0:f03000 (1fff) get Phys(data[n=5+2000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:00f05000 ph data[4]=0:f03000 (2fff) get Phys(data[n=5+3000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:00f06000 ph data[4]=0:f03000 (3fff) get Phys(data[n=5+4000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:00f07000 ph data[4]=0:f03000 (4fff) get Phys(data[n=5+5000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:00ee0000 ph data[5]=0:ee0000 (fff) get Phys(data[n=6+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:00ee9000 ph data[6]=0:ee9000 (fff) get Phys(data[n=7+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:00ef2000 ph data[7]=0:ef2000 (fff) get Phys(data[n=8+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:00efb000 ph data[8]=0:efb000 (fff) get Phys(data[n=9+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:00efc000 ph data[8]=0:efb000 (1fff) get Phys(data[n=9+2000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:00efd000 set TERM ph data[8]=0:efb000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 9 request(s)! AtapiStartIo: next Srb b5e1c300 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e26c08 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26c08, CDB 0xb5e26c38, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=8 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93c1e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x9, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26c08 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26c08, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26c08 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6778030, SCmd 0x2a UniataNeedQueueing: qd=7 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68ccc ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f915bc, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x9, flags 0x45, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26c08, CDB 0xb5e26c38, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f0b0, OrigWordsRequested 0x2600, DevSize 0x26 IdeReadWrite (REQ): Starting sector is 3904f0b0, Number of WORDS 0x2600, DevSize 0x26 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b8c000, count 4c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b8c000) AtapiVirtToPhysAddr_: f6b8c000 -> 00000000:3f8db000 ph data[0]=0:3f8db000 (fff) get Phys(data[n=1+1000]=f6b8d000) AtapiVirtToPhysAddr_: f6b8d000 -> 00000000:3f8ec000 ph data[1]=0:3f8ec000 (fff) get Phys(data[n=2+1000]=f6b8e000) AtapiVirtToPhysAddr_: f6b8e000 -> 00000000:3f90d000 ph data[2]=0:3f90d000 (fff) get Phys(data[n=3+1000]=f6b8f000) AtapiVirtToPhysAddr_: f6b8f000 -> 00000000:3f87e000 ph data[3]=0:3f87e000 (fff) get Phys(data[n=4+1000]=f6b90000) AtapiVirtToPhysAddr_: f6b90000 -> 00000000:3f6ff000 set TERM ph data[4]=0:3f6ff000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5e26c08 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=7 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59134 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f9153c, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e55d00 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=6 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69250 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f914bc, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55d00, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55d00 AtapiInterrupt: NextRequest, srb=0xb5e44930 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=5 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b691e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f9143c, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x9, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b687a4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93c9e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x9, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f913000 ph data[0]=0:3f913000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f88c000 set TERM ph data[1]=0:3f88c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1d468 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d468, CDB 0xb5e1d498, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68564 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93d1e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d468 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d468, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d468 AtapiInterrupt: NextRequest, srb=0xb5e1c300 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1c300, CDB 0xb5e1c330, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93d9e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x9, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1c300 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1c300, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1c300 AtapiInterrupt: NextRequest, srb=0xb5e55d00 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e55d00, CDB 0xb5e55d30, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e55d00 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e55d00, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e55d00 AtapiInterrupt: NextRequest, srb=0xb5e26c08 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26c08, CDB 0xb5e26c38, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdc3c ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f0b0, Count 0x26(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x5, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26c08 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2600, WordsLeft 2600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4c00, full size 4c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26c08, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26c08 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5770 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39018bb0, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 39018bb0, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b92000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:af333000 ph data[0]=0:af333000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:af334000 ph data[0]=0:af333000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:af335000 ph data[0]=0:af333000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:af336000 set TERM ph data[0]=0:af333000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39018bb0, Count 0x20(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5770 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39069db0, OrigWordsRequested 0x6000, DevSize 0x60 IdeReadWrite (REQ): Starting sector is 39069db0, Number of WORDS 0x6000, DevSize 0x60 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b96000, count c000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:af337000 ph data[0]=0:af337000 (fff) get Phys(data[n=1+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:af338000 ph data[0]=0:af337000 (1fff) get Phys(data[n=1+2000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:af331000 ph data[1]=0:af331000 (fff) get Phys(data[n=2+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:af332000 ph data[1]=0:af331000 (1fff) get Phys(data[n=2+2000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:af33b000 ph data[2]=0:af33b000 (fff) get Phys(data[n=3+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:af33c000 ph data[2]=0:af33b000 (1fff) get Phys(data[n=3+2000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:af33d000 ph data[2]=0:af33b000 (2fff) get Phys(data[n=3+3000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:af33e000 ph data[2]=0:af33b000 (3fff) get Phys(data[n=3+4000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:af33f000 ph data[2]=0:af33b000 (4fff) get Phys(data[n=3+5000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:af340000 ph data[2]=0:af33b000 (5fff) get Phys(data[n=3+6000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:af339000 ph data[3]=0:af339000 (fff) get Phys(data[n=4+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:af33a000 set TERM ph data[3]=0:af339000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5644 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39069db0, Count 0x60(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396058e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396058e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:af343000 ph data[0]=0:af343000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:af344000 ph data[0]=0:af343000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:af345000 ph data[0]=0:af343000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:af346000 ph data[0]=0:af343000 (3fff) get Phys(data[n=1+4000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:af347000 ph data[0]=0:af343000 (4fff) get Phys(data[n=1+5000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:af348000 ph data[0]=0:af343000 (5fff) get Phys(data[n=1+6000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:af341000 ph data[1]=0:af341000 (fff) get Phys(data[n=2+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:af342000 ph data[1]=0:af341000 (1fff) get Phys(data[n=2+2000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:af34b000 ph data[2]=0:af34b000 (fff) get Phys(data[n=3+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:af34c000 ph data[2]=0:af34b000 (1fff) get Phys(data[n=3+2000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:af34d000 ph data[2]=0:af34b000 (2fff) get Phys(data[n=3+3000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:af34e000 ph data[2]=0:af34b000 (3fff) get Phys(data[n=3+4000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:af34f000 ph data[2]=0:af34b000 (4fff) get Phys(data[n=3+5000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:af350000 ph data[2]=0:af34b000 (5fff) get Phys(data[n=3+6000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:af349000 ph data[3]=0:af349000 (fff) get Phys(data[n=4+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:af34a000 set TERM ph data[3]=0:af349000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 6000, WordsLeft 6000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered c000, full size c000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396058e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:af353000 ph data[0]=0:af353000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:af354000 ph data[0]=0:af353000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:af355000 ph data[0]=0:af353000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:af356000 ph data[0]=0:af353000 (3fff) get Phys(data[n=1+4000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:af357000 ph data[0]=0:af353000 (4fff) get Phys(data[n=1+5000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:af358000 ph data[0]=0:af353000 (5fff) get Phys(data[n=1+6000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:af351000 ph data[1]=0:af351000 (fff) get Phys(data[n=2+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:af352000 ph data[1]=0:af351000 (1fff) get Phys(data[n=2+2000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:af35b000 ph data[2]=0:af35b000 (fff) get Phys(data[n=3+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:af35c000 ph data[2]=0:af35b000 (1fff) get Phys(data[n=3+2000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:af35d000 ph data[2]=0:af35b000 (2fff) get Phys(data[n=3+3000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:af35e000 ph data[2]=0:af35b000 (3fff) get Phys(data[n=3+4000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:af35f000 ph data[2]=0:af35b000 (4fff) get Phys(data[n=3+5000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:af360000 ph data[2]=0:af35b000 (5fff) get Phys(data[n=3+6000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:af359000 ph data[3]=0:af359000 (fff) get Phys(data[n=4+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:af35a000 set TERM ph data[3]=0:af359000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396059e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396059e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:af363000 ph data[0]=0:af363000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:af364000 ph data[0]=0:af363000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:af365000 ph data[0]=0:af363000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:af366000 ph data[0]=0:af363000 (3fff) get Phys(data[n=1+4000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:af367000 ph data[0]=0:af363000 (4fff) get Phys(data[n=1+5000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:af368000 ph data[0]=0:af363000 (5fff) get Phys(data[n=1+6000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:af361000 ph data[1]=0:af361000 (fff) get Phys(data[n=2+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:af362000 ph data[1]=0:af361000 (1fff) get Phys(data[n=2+2000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:af36b000 ph data[2]=0:af36b000 (fff) get Phys(data[n=3+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:af36c000 ph data[2]=0:af36b000 (1fff) get Phys(data[n=3+2000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:af36d000 ph data[2]=0:af36b000 (2fff) get Phys(data[n=3+3000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:af36e000 ph data[2]=0:af36b000 (3fff) get Phys(data[n=3+4000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:af36f000 ph data[2]=0:af36b000 (4fff) get Phys(data[n=3+5000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:af370000 ph data[2]=0:af36b000 (5fff) get Phys(data[n=3+6000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:af369000 ph data[3]=0:af369000 (fff) get Phys(data[n=4+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:af36a000 set TERM ph data[3]=0:af369000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396059e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605a60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605a60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:af373000 ph data[0]=0:af373000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:af374000 ph data[0]=0:af373000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:af375000 ph data[0]=0:af373000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:af376000 ph data[0]=0:af373000 (3fff) get Phys(data[n=1+4000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:af377000 ph data[0]=0:af373000 (4fff) get Phys(data[n=1+5000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:af378000 ph data[0]=0:af373000 (5fff) get Phys(data[n=1+6000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:af371000 ph data[1]=0:af371000 (fff) get Phys(data[n=2+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:af372000 ph data[1]=0:af371000 (1fff) get Phys(data[n=2+2000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:af37b000 ph data[2]=0:af37b000 (fff) get Phys(data[n=3+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:af37c000 ph data[2]=0:af37b000 (1fff) get Phys(data[n=3+2000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:af37d000 ph data[2]=0:af37b000 (2fff) get Phys(data[n=3+3000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:af37e000 ph data[2]=0:af37b000 (3fff) get Phys(data[n=3+4000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:af37f000 ph data[2]=0:af37b000 (4fff) get Phys(data[n=3+5000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:af380000 ph data[2]=0:af37b000 (5fff) get Phys(data[n=3+6000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:af379000 ph data[3]=0:af379000 (fff) get Phys(data[n=4+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:af37a000 set TERM ph data[3]=0:af379000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605a60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605ae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605ae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:af383000 ph data[0]=0:af383000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:af384000 ph data[0]=0:af383000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:af385000 ph data[0]=0:af383000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:af386000 ph data[0]=0:af383000 (3fff) get Phys(data[n=1+4000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:af387000 ph data[0]=0:af383000 (4fff) get Phys(data[n=1+5000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:af388000 ph data[0]=0:af383000 (5fff) get Phys(data[n=1+6000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:af381000 ph data[1]=0:af381000 (fff) get Phys(data[n=2+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:af382000 ph data[1]=0:af381000 (1fff) get Phys(data[n=2+2000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:af38b000 ph data[2]=0:af38b000 (fff) get Phys(data[n=3+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:af38c000 ph data[2]=0:af38b000 (1fff) get Phys(data[n=3+2000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:af38d000 ph data[2]=0:af38b000 (2fff) get Phys(data[n=3+3000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:af38e000 ph data[2]=0:af38b000 (3fff) get Phys(data[n=3+4000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:af38f000 ph data[2]=0:af38b000 (4fff) get Phys(data[n=3+5000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:af390000 ph data[2]=0:af38b000 (5fff) get Phys(data[n=3+6000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:af389000 ph data[3]=0:af389000 (fff) get Phys(data[n=4+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:af38a000 set TERM ph data[3]=0:af389000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605b60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605b60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:af393000 ph data[0]=0:af393000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:af394000 ph data[0]=0:af393000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:af395000 ph data[0]=0:af393000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:af396000 ph data[0]=0:af393000 (3fff) get Phys(data[n=1+4000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:af397000 ph data[0]=0:af393000 (4fff) get Phys(data[n=1+5000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:af398000 ph data[0]=0:af393000 (5fff) get Phys(data[n=1+6000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:af391000 ph data[1]=0:af391000 (fff) get Phys(data[n=2+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:af392000 ph data[1]=0:af391000 (1fff) get Phys(data[n=2+2000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:af39b000 ph data[2]=0:af39b000 (fff) get Phys(data[n=3+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:af39c000 ph data[2]=0:af39b000 (1fff) get Phys(data[n=3+2000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:af39d000 ph data[2]=0:af39b000 (2fff) get Phys(data[n=3+3000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:af39e000 ph data[2]=0:af39b000 (3fff) get Phys(data[n=3+4000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:af39f000 ph data[2]=0:af39b000 (4fff) get Phys(data[n=3+5000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:af3a0000 ph data[2]=0:af39b000 (5fff) get Phys(data[n=3+6000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:af399000 ph data[3]=0:af399000 (fff) get Phys(data[n=4+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:af39a000 set TERM ph data[3]=0:af399000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605ae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605be0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605be0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:af3a3000 ph data[0]=0:af3a3000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:af3a4000 ph data[0]=0:af3a3000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:af3a5000 ph data[0]=0:af3a3000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:af3a6000 ph data[0]=0:af3a3000 (3fff) get Phys(data[n=1+4000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:af3a7000 ph data[0]=0:af3a3000 (4fff) get Phys(data[n=1+5000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:af3a8000 ph data[0]=0:af3a3000 (5fff) get Phys(data[n=1+6000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:af3a1000 ph data[1]=0:af3a1000 (fff) get Phys(data[n=2+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:af3a2000 ph data[1]=0:af3a1000 (1fff) get Phys(data[n=2+2000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:af3ab000 ph data[2]=0:af3ab000 (fff) get Phys(data[n=3+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:af3ac000 ph data[2]=0:af3ab000 (1fff) get Phys(data[n=3+2000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:af3ad000 ph data[2]=0:af3ab000 (2fff) get Phys(data[n=3+3000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:af3ae000 ph data[2]=0:af3ab000 (3fff) get Phys(data[n=3+4000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:af3af000 ph data[2]=0:af3ab000 (4fff) get Phys(data[n=3+5000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:af3b0000 ph data[2]=0:af3ab000 (5fff) get Phys(data[n=3+6000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:af3a9000 ph data[3]=0:af3a9000 (fff) get Phys(data[n=4+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:af3aa000 set TERM ph data[3]=0:af3a9000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605b60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x4, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59ad8 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605be0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605c60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605c60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:a855b000 ph data[0]=0:a855b000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:a855c000 ph data[0]=0:a855b000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:a855d000 ph data[0]=0:a855b000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:a855e000 ph data[0]=0:a855b000 (3fff) get Phys(data[n=1+4000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:a855f000 ph data[0]=0:a855b000 (4fff) get Phys(data[n=1+5000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:a8560000 ph data[0]=0:a855b000 (5fff) get Phys(data[n=1+6000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:a8561000 ph data[0]=0:a855b000 (6fff) get Phys(data[n=1+7000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:a855a000 ph data[1]=0:a855a000 (fff) get Phys(data[n=2+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:a8563000 ph data[2]=0:a8563000 (fff) get Phys(data[n=3+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:a8564000 ph data[2]=0:a8563000 (1fff) get Phys(data[n=3+2000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:a8565000 ph data[2]=0:a8563000 (2fff) get Phys(data[n=3+3000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:a8566000 ph data[2]=0:a8563000 (3fff) get Phys(data[n=3+4000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:a8567000 ph data[2]=0:a8563000 (4fff) get Phys(data[n=3+5000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:a8568000 ph data[2]=0:a8563000 (5fff) get Phys(data[n=3+6000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:a8569000 ph data[2]=0:a8563000 (6fff) get Phys(data[n=3+7000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:a8562000 set TERM ph data[3]=0:a8562000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605c60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605ce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605ce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:a856b000 ph data[0]=0:a856b000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:a856c000 ph data[0]=0:a856b000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:a856d000 ph data[0]=0:a856b000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:a856e000 ph data[0]=0:a856b000 (3fff) get Phys(data[n=1+4000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:a856f000 ph data[0]=0:a856b000 (4fff) get Phys(data[n=1+5000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:a8570000 ph data[0]=0:a856b000 (5fff) get Phys(data[n=1+6000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:a8571000 ph data[0]=0:a856b000 (6fff) get Phys(data[n=1+7000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:a856a000 ph data[1]=0:a856a000 (fff) get Phys(data[n=2+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:a8573000 ph data[2]=0:a8573000 (fff) get Phys(data[n=3+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:a8574000 ph data[2]=0:a8573000 (1fff) get Phys(data[n=3+2000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:a8575000 ph data[2]=0:a8573000 (2fff) get Phys(data[n=3+3000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:a8576000 ph data[2]=0:a8573000 (3fff) get Phys(data[n=3+4000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:a8577000 ph data[2]=0:a8573000 (4fff) get Phys(data[n=3+5000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:a8578000 ph data[2]=0:a8573000 (5fff) get Phys(data[n=3+6000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:a8579000 ph data[2]=0:a8573000 (6fff) get Phys(data[n=3+7000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:a8572000 set TERM ph data[3]=0:a8572000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605d60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605d60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:a857b000 ph data[0]=0:a857b000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:a857c000 ph data[0]=0:a857b000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:a857d000 ph data[0]=0:a857b000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:a857e000 ph data[0]=0:a857b000 (3fff) get Phys(data[n=1+4000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:a857f000 ph data[0]=0:a857b000 (4fff) get Phys(data[n=1+5000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:a8580000 ph data[0]=0:a857b000 (5fff) get Phys(data[n=1+6000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:a8581000 ph data[0]=0:a857b000 (6fff) get Phys(data[n=1+7000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:a857a000 ph data[1]=0:a857a000 (fff) get Phys(data[n=2+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:a8583000 ph data[2]=0:a8583000 (fff) get Phys(data[n=3+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:a8584000 ph data[2]=0:a8583000 (1fff) get Phys(data[n=3+2000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:a8585000 ph data[2]=0:a8583000 (2fff) get Phys(data[n=3+3000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:a8586000 ph data[2]=0:a8583000 (3fff) get Phys(data[n=3+4000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:a8587000 ph data[2]=0:a8583000 (4fff) get Phys(data[n=3+5000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:a8588000 ph data[2]=0:a8583000 (5fff) get Phys(data[n=3+6000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:a8589000 ph data[2]=0:a8583000 (6fff) get Phys(data[n=3+7000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:a8582000 set TERM ph data[3]=0:a8582000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605ce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x4, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605de0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605de0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:a858b000 ph data[0]=0:a858b000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:a858c000 ph data[0]=0:a858b000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:a858d000 ph data[0]=0:a858b000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:a858e000 ph data[0]=0:a858b000 (3fff) get Phys(data[n=1+4000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:a858f000 ph data[0]=0:a858b000 (4fff) get Phys(data[n=1+5000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:a8590000 ph data[0]=0:a858b000 (5fff) get Phys(data[n=1+6000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:a8591000 ph data[0]=0:a858b000 (6fff) get Phys(data[n=1+7000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:a858a000 ph data[1]=0:a858a000 (fff) get Phys(data[n=2+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:a8593000 ph data[2]=0:a8593000 (fff) get Phys(data[n=3+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:a8594000 ph data[2]=0:a8593000 (1fff) get Phys(data[n=3+2000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:a8595000 ph data[2]=0:a8593000 (2fff) get Phys(data[n=3+3000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:a8596000 ph data[2]=0:a8593000 (3fff) get Phys(data[n=3+4000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:a8597000 ph data[2]=0:a8593000 (4fff) get Phys(data[n=3+5000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:a8598000 ph data[2]=0:a8593000 (5fff) get Phys(data[n=3+6000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:a8599000 ph data[2]=0:a8593000 (6fff) get Phys(data[n=3+7000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:a8592000 set TERM ph data[3]=0:a8592000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605d60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59ad8 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605de0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605e60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605e60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:a859b000 ph data[0]=0:a859b000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:a859c000 ph data[0]=0:a859b000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:a859d000 ph data[0]=0:a859b000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:a859e000 ph data[0]=0:a859b000 (3fff) get Phys(data[n=1+4000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:a859f000 ph data[0]=0:a859b000 (4fff) get Phys(data[n=1+5000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:a85a0000 ph data[0]=0:a859b000 (5fff) get Phys(data[n=1+6000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:a85a1000 ph data[0]=0:a859b000 (6fff) get Phys(data[n=1+7000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:a859a000 ph data[1]=0:a859a000 (fff) get Phys(data[n=2+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:a85a3000 ph data[2]=0:a85a3000 (fff) get Phys(data[n=3+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:a85a4000 ph data[2]=0:a85a3000 (1fff) get Phys(data[n=3+2000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:a85a5000 ph data[2]=0:a85a3000 (2fff) get Phys(data[n=3+3000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:a85a6000 ph data[2]=0:a85a3000 (3fff) get Phys(data[n=3+4000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:a85a7000 ph data[2]=0:a85a3000 (4fff) get Phys(data[n=3+5000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:a85a8000 ph data[2]=0:a85a3000 (5fff) get Phys(data[n=3+6000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:a85a9000 ph data[2]=0:a85a3000 (6fff) get Phys(data[n=3+7000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:a85a2000 set TERM ph data[3]=0:a85a2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605e60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605ee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605ee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:a85ab000 ph data[0]=0:a85ab000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:a85ac000 ph data[0]=0:a85ab000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:a85ad000 ph data[0]=0:a85ab000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:a85ae000 ph data[0]=0:a85ab000 (3fff) get Phys(data[n=1+4000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:a85af000 ph data[0]=0:a85ab000 (4fff) get Phys(data[n=1+5000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:a85b0000 ph data[0]=0:a85ab000 (5fff) get Phys(data[n=1+6000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:a85b1000 ph data[0]=0:a85ab000 (6fff) get Phys(data[n=1+7000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:a85aa000 ph data[1]=0:a85aa000 (fff) get Phys(data[n=2+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:a85b3000 ph data[2]=0:a85b3000 (fff) get Phys(data[n=3+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:a85b4000 ph data[2]=0:a85b3000 (1fff) get Phys(data[n=3+2000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:a85b5000 ph data[2]=0:a85b3000 (2fff) get Phys(data[n=3+3000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:a85b6000 ph data[2]=0:a85b3000 (3fff) get Phys(data[n=3+4000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:a85b7000 ph data[2]=0:a85b3000 (4fff) get Phys(data[n=3+5000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:a85b8000 ph data[2]=0:a85b3000 (5fff) get Phys(data[n=3+6000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:a85b9000 ph data[2]=0:a85b3000 (6fff) get Phys(data[n=3+7000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:a85b2000 set TERM ph data[3]=0:a85b2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605f60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605f60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:a85bb000 ph data[0]=0:a85bb000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:a85bc000 ph data[0]=0:a85bb000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:a85bd000 ph data[0]=0:a85bb000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:a85be000 ph data[0]=0:a85bb000 (3fff) get Phys(data[n=1+4000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:a85bf000 ph data[0]=0:a85bb000 (4fff) get Phys(data[n=1+5000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:a85c0000 ph data[0]=0:a85bb000 (5fff) get Phys(data[n=1+6000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:a85c1000 ph data[0]=0:a85bb000 (6fff) get Phys(data[n=1+7000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:a85ba000 ph data[1]=0:a85ba000 (fff) get Phys(data[n=2+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:a85c3000 ph data[2]=0:a85c3000 (fff) get Phys(data[n=3+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:a85c4000 ph data[2]=0:a85c3000 (1fff) get Phys(data[n=3+2000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:a85c5000 ph data[2]=0:a85c3000 (2fff) get Phys(data[n=3+3000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:a85c6000 ph data[2]=0:a85c3000 (3fff) get Phys(data[n=3+4000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:a85c7000 ph data[2]=0:a85c3000 (4fff) get Phys(data[n=3+5000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:a85c8000 ph data[2]=0:a85c3000 (5fff) get Phys(data[n=3+6000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:a85c9000 ph data[2]=0:a85c3000 (6fff) get Phys(data[n=3+7000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:a85c2000 set TERM ph data[3]=0:a85c2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605ee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39605fe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39605fe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:a85cb000 ph data[0]=0:a85cb000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:a85cc000 ph data[0]=0:a85cb000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:a85cd000 ph data[0]=0:a85cb000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:a85ce000 ph data[0]=0:a85cb000 (3fff) get Phys(data[n=1+4000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:a85cf000 ph data[0]=0:a85cb000 (4fff) get Phys(data[n=1+5000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:a85d0000 ph data[0]=0:a85cb000 (5fff) get Phys(data[n=1+6000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:a85d1000 ph data[0]=0:a85cb000 (6fff) get Phys(data[n=1+7000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:a85ca000 ph data[1]=0:a85ca000 (fff) get Phys(data[n=2+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:a85d3000 ph data[2]=0:a85d3000 (fff) get Phys(data[n=3+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:a85d4000 ph data[2]=0:a85d3000 (1fff) get Phys(data[n=3+2000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:a85d5000 ph data[2]=0:a85d3000 (2fff) get Phys(data[n=3+3000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:a85d6000 ph data[2]=0:a85d3000 (3fff) get Phys(data[n=3+4000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:a85d7000 ph data[2]=0:a85d3000 (4fff) get Phys(data[n=3+5000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:a85d8000 ph data[2]=0:a85d3000 (5fff) get Phys(data[n=3+6000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:a85d9000 ph data[2]=0:a85d3000 (6fff) get Phys(data[n=3+7000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:a85d2000 set TERM ph data[3]=0:a85d2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68804 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605f60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x4, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f4c ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39605fe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:a4903000 ph data[0]=0:a4903000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:a4904000 ph data[0]=0:a4903000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:a4905000 ph data[0]=0:a4903000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:a4906000 ph data[0]=0:a4903000 (3fff) get Phys(data[n=1+4000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:a4907000 ph data[0]=0:a4903000 (4fff) get Phys(data[n=1+5000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:a4900000 ph data[1]=0:a4900000 (fff) get Phys(data[n=2+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:a4901000 ph data[1]=0:a4900000 (1fff) get Phys(data[n=2+2000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:a4902000 ph data[1]=0:a4900000 (2fff) get Phys(data[n=2+3000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:a490b000 ph data[2]=0:a490b000 (fff) get Phys(data[n=3+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:a490c000 ph data[2]=0:a490b000 (1fff) get Phys(data[n=3+2000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:a490d000 ph data[2]=0:a490b000 (2fff) get Phys(data[n=3+3000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:a490e000 ph data[2]=0:a490b000 (3fff) get Phys(data[n=3+4000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:a490f000 ph data[2]=0:a490b000 (4fff) get Phys(data[n=3+5000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:a4908000 ph data[3]=0:a4908000 (fff) get Phys(data[n=4+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:a4909000 ph data[3]=0:a4908000 (1fff) get Phys(data[n=4+2000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:a490a000 set TERM ph data[3]=0:a4908000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396060e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396060e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:a4913000 ph data[0]=0:a4913000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:a4914000 ph data[0]=0:a4913000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:a4915000 ph data[0]=0:a4913000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:a4916000 ph data[0]=0:a4913000 (3fff) get Phys(data[n=1+4000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:a4917000 ph data[0]=0:a4913000 (4fff) get Phys(data[n=1+5000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:a4910000 ph data[1]=0:a4910000 (fff) get Phys(data[n=2+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:a4911000 ph data[1]=0:a4910000 (1fff) get Phys(data[n=2+2000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:a4912000 ph data[1]=0:a4910000 (2fff) get Phys(data[n=2+3000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:a491b000 ph data[2]=0:a491b000 (fff) get Phys(data[n=3+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:a491c000 ph data[2]=0:a491b000 (1fff) get Phys(data[n=3+2000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:a491d000 ph data[2]=0:a491b000 (2fff) get Phys(data[n=3+3000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:a491e000 ph data[2]=0:a491b000 (3fff) get Phys(data[n=3+4000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:a491f000 ph data[2]=0:a491b000 (4fff) get Phys(data[n=3+5000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:a4918000 ph data[3]=0:a4918000 (fff) get Phys(data[n=4+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:a4919000 ph data[3]=0:a4918000 (1fff) get Phys(data[n=4+2000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:a491a000 set TERM ph data[3]=0:a4918000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:a4923000 ph data[0]=0:a4923000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:a4924000 ph data[0]=0:a4923000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:a4925000 ph data[0]=0:a4923000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:a4926000 ph data[0]=0:a4923000 (3fff) get Phys(data[n=1+4000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:a4927000 ph data[0]=0:a4923000 (4fff) get Phys(data[n=1+5000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:a4920000 ph data[1]=0:a4920000 (fff) get Phys(data[n=2+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:a4921000 ph data[1]=0:a4920000 (1fff) get Phys(data[n=2+2000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:a4922000 ph data[1]=0:a4920000 (2fff) get Phys(data[n=2+3000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:a492b000 ph data[2]=0:a492b000 (fff) get Phys(data[n=3+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:a492c000 ph data[2]=0:a492b000 (1fff) get Phys(data[n=3+2000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:a492d000 ph data[2]=0:a492b000 (2fff) get Phys(data[n=3+3000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:a492e000 ph data[2]=0:a492b000 (3fff) get Phys(data[n=3+4000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:a492f000 ph data[2]=0:a492b000 (4fff) get Phys(data[n=3+5000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:a4928000 ph data[3]=0:a4928000 (fff) get Phys(data[n=4+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:a4929000 ph data[3]=0:a4928000 (1fff) get Phys(data[n=4+2000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:a492a000 set TERM ph data[3]=0:a4928000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396060e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x4, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396061e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396061e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:a4933000 ph data[0]=0:a4933000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:a4934000 ph data[0]=0:a4933000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:a4935000 ph data[0]=0:a4933000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:a4936000 ph data[0]=0:a4933000 (3fff) get Phys(data[n=1+4000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:a4937000 ph data[0]=0:a4933000 (4fff) get Phys(data[n=1+5000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:a4930000 ph data[1]=0:a4930000 (fff) get Phys(data[n=2+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:a4931000 ph data[1]=0:a4930000 (1fff) get Phys(data[n=2+2000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:a4932000 ph data[1]=0:a4930000 (2fff) get Phys(data[n=2+3000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:a493b000 ph data[2]=0:a493b000 (fff) get Phys(data[n=3+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:a493c000 ph data[2]=0:a493b000 (1fff) get Phys(data[n=3+2000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:a493d000 ph data[2]=0:a493b000 (2fff) get Phys(data[n=3+3000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:a493e000 ph data[2]=0:a493b000 (3fff) get Phys(data[n=3+4000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:a493f000 ph data[2]=0:a493b000 (4fff) get Phys(data[n=3+5000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:a4938000 ph data[3]=0:a4938000 (fff) get Phys(data[n=4+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:a4939000 ph data[3]=0:a4938000 (1fff) get Phys(data[n=4+2000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:a493a000 set TERM ph data[3]=0:a4938000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606160, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f0e0, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 3904f0e0, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3b303000 ph data[0]=0:3b303000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f8dc000 set TERM ph data[1]=0:3f8dc000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59104 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396061e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:3ec53000 ph data[0]=0:3ec53000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:3f904000 set TERM ph data[1]=0:3f904000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b689d8 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f0e0, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:a4943000 ph data[0]=0:a4943000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:a4944000 ph data[0]=0:a4943000 (1fff) get Phys(data[n=1+2000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:a4945000 ph data[0]=0:a4943000 (2fff) get Phys(data[n=1+3000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:a4946000 ph data[0]=0:a4943000 (3fff) get Phys(data[n=1+4000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:a4947000 ph data[0]=0:a4943000 (4fff) get Phys(data[n=1+5000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:a4940000 ph data[1]=0:a4940000 (fff) get Phys(data[n=2+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:a4941000 ph data[1]=0:a4940000 (1fff) get Phys(data[n=2+2000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:a4942000 ph data[1]=0:a4940000 (2fff) get Phys(data[n=2+3000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:a494b000 ph data[2]=0:a494b000 (fff) get Phys(data[n=3+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:a494c000 ph data[2]=0:a494b000 (1fff) get Phys(data[n=3+2000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:a494d000 ph data[2]=0:a494b000 (2fff) get Phys(data[n=3+3000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:a494e000 ph data[2]=0:a494b000 (3fff) get Phys(data[n=3+4000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:a494f000 ph data[2]=0:a494b000 (4fff) get Phys(data[n=3+5000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:a4948000 ph data[3]=0:a4948000 (fff) get Phys(data[n=4+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:a4949000 ph data[3]=0:a4948000 (1fff) get Phys(data[n=4+2000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:a494a000 set TERM ph data[3]=0:a4948000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606260, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396062e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396062e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:a4953000 ph data[0]=0:a4953000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:a4954000 ph data[0]=0:a4953000 (1fff) get Phys(data[n=1+2000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:a4955000 ph data[0]=0:a4953000 (2fff) get Phys(data[n=1+3000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:a4956000 ph data[0]=0:a4953000 (3fff) get Phys(data[n=1+4000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:a4957000 ph data[0]=0:a4953000 (4fff) get Phys(data[n=1+5000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:a4950000 ph data[1]=0:a4950000 (fff) get Phys(data[n=2+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:a4951000 ph data[1]=0:a4950000 (1fff) get Phys(data[n=2+2000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:a4952000 ph data[1]=0:a4950000 (2fff) get Phys(data[n=2+3000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:a495b000 ph data[2]=0:a495b000 (fff) get Phys(data[n=3+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:a495c000 ph data[2]=0:a495b000 (1fff) get Phys(data[n=3+2000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:a495d000 ph data[2]=0:a495b000 (2fff) get Phys(data[n=3+3000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:a495e000 ph data[2]=0:a495b000 (3fff) get Phys(data[n=3+4000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:a495f000 ph data[2]=0:a495b000 (4fff) get Phys(data[n=3+5000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:a4958000 ph data[3]=0:a4958000 (fff) get Phys(data[n=4+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:a4959000 ph data[3]=0:a4958000 (1fff) get Phys(data[n=4+2000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:a495a000 set TERM ph data[3]=0:a4958000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606360, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606360, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:a4963000 ph data[0]=0:a4963000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:a4964000 ph data[0]=0:a4963000 (1fff) get Phys(data[n=1+2000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:a4965000 ph data[0]=0:a4963000 (2fff) get Phys(data[n=1+3000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:a4966000 ph data[0]=0:a4963000 (3fff) get Phys(data[n=1+4000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:a4967000 ph data[0]=0:a4963000 (4fff) get Phys(data[n=1+5000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:a4960000 ph data[1]=0:a4960000 (fff) get Phys(data[n=2+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:a4961000 ph data[1]=0:a4960000 (1fff) get Phys(data[n=2+2000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:a4962000 ph data[1]=0:a4960000 (2fff) get Phys(data[n=2+3000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:a496b000 ph data[2]=0:a496b000 (fff) get Phys(data[n=3+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:a496c000 ph data[2]=0:a496b000 (1fff) get Phys(data[n=3+2000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:a496d000 ph data[2]=0:a496b000 (2fff) get Phys(data[n=3+3000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:a496e000 ph data[2]=0:a496b000 (3fff) get Phys(data[n=3+4000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:a496f000 ph data[2]=0:a496b000 (4fff) get Phys(data[n=3+5000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:a4968000 ph data[3]=0:a4968000 (fff) get Phys(data[n=4+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:a4969000 ph data[3]=0:a4968000 (1fff) get Phys(data[n=4+2000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:a496a000 set TERM ph data[3]=0:a4968000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396062e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x45, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396063e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396063e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:a4973000 ph data[0]=0:a4973000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:a4974000 ph data[0]=0:a4973000 (1fff) get Phys(data[n=1+2000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:a4975000 ph data[0]=0:a4973000 (2fff) get Phys(data[n=1+3000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:a4976000 ph data[0]=0:a4973000 (3fff) get Phys(data[n=1+4000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:a4977000 ph data[0]=0:a4973000 (4fff) get Phys(data[n=1+5000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:a4970000 ph data[1]=0:a4970000 (fff) get Phys(data[n=2+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:a4971000 ph data[1]=0:a4970000 (1fff) get Phys(data[n=2+2000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:a4972000 ph data[1]=0:a4970000 (2fff) get Phys(data[n=2+3000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:a497b000 ph data[2]=0:a497b000 (fff) get Phys(data[n=3+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:a497c000 ph data[2]=0:a497b000 (1fff) get Phys(data[n=3+2000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:a497d000 ph data[2]=0:a497b000 (2fff) get Phys(data[n=3+3000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:a497e000 ph data[2]=0:a497b000 (3fff) get Phys(data[n=3+4000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:a497f000 ph data[2]=0:a497b000 (4fff) get Phys(data[n=3+5000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:a4978000 ph data[3]=0:a4978000 (fff) get Phys(data[n=4+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:a4979000 ph data[3]=0:a4978000 (1fff) get Phys(data[n=4+2000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:a497a000 set TERM ph data[3]=0:a4978000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606360, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x4, flags 0x45, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b593f8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396063e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5770 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fb4300, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4300, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02ca4000 ph data[0]=0:2ca4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02ca5000 set TERM ph data[0]=0:2ca4000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4300, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f0f0, OrigWordsRequested 0x2800, DevSize 0x28 IdeReadWrite (REQ): Starting sector is 3904f0f0, Number of WORDS 0x2800, DevSize 0x28 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c10000, count 5000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:38983000 ph data[0]=0:38983000 (fff) get Phys(data[n=1+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:3b37c000 ph data[1]=0:3b37c000 (fff) get Phys(data[n=2+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:389bd000 ph data[2]=0:389bd000 (fff) get Phys(data[n=3+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:3bdc6000 ph data[3]=0:3bdc6000 (fff) get Phys(data[n=4+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:389df000 set TERM ph data[4]=0:389df000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f0f0, Count 0x28(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x5, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2800, WordsLeft 2800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5000, full size 5000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f120, OrigWordsRequested 0x700, DevSize 0x7 IdeReadWrite (REQ): Starting sector is 3904f120, Number of WORDS 0x700, DevSize 0x7 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:38c4b000 set TERM ph data[0]=0:38c4b000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f120, Count 0x7(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 700, WordsLeft 700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e00, full size e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f130, OrigWordsRequested 0x900, DevSize 0x9 IdeReadWrite (REQ): Starting sector is 3904f130, Number of WORDS 0x900, DevSize 0x9 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count 1200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:2e643000 ph data[0]=0:2e643000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:2842c000 set TERM ph data[1]=0:2842c000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f130, Count 0x9(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 900, WordsLeft 900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1200, full size 1200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f140, OrigWordsRequested 0x500, DevSize 0x5 IdeReadWrite (REQ): Starting sector is 3904f140, Number of WORDS 0x500, DevSize 0x5 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:3f92b000 set TERM ph data[0]=0:3f92b000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f140, Count 0x5(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 500, WordsLeft 500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a00, full size a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f150, OrigWordsRequested 0x1d00, DevSize 0x1d IdeReadWrite (REQ): Starting sector is 3904f150, Number of WORDS 0x1d00, DevSize 0x1d AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c12000, count 3a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:3b35b000 ph data[0]=0:3b35b000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2edac000 ph data[1]=0:2edac000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:2ed9d000 ph data[2]=0:2ed9d000 (fff) get Phys(data[n=3+1000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:3f8d6000 set TERM ph data[3]=0:3f8d6000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f150, Count 0x1d(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1d00, WordsLeft 1d00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3a00, full size 3a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f170, OrigWordsRequested 0x5700, DevSize 0x57 IdeReadWrite (REQ): Starting sector is 3904f170, Number of WORDS 0x5700, DevSize 0x57 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c0a000, count ae00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:3b2f4000 ph data[0]=0:3b2f4000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:2e54d000 ph data[1]=0:2e54d000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:2ed8e000 ph data[2]=0:2ed8e000 (fff) get Phys(data[n=3+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:3b33f000 ph data[3]=0:3b33f000 (fff) get Phys(data[n=4+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:3f6f8000 ph data[4]=0:3f6f8000 (fff) get Phys(data[n=5+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:389e1000 ph data[5]=0:389e1000 (fff) get Phys(data[n=6+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:3b352000 ph data[6]=0:3b352000 (fff) get Phys(data[n=7+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:2e5b3000 ph data[7]=0:2e5b3000 (fff) get Phys(data[n=8+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:3b2ec000 ph data[8]=0:3b2ec000 (fff) get Phys(data[n=9+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:3bdad000 ph data[9]=0:3bdad000 (fff) get Phys(data[n=10+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:3f8de000 set TERM ph data[10]=0:3f8de000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f170, Count 0x57(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xb, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5700, WordsLeft 5700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ae00, full size ae00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f1d0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3904f1d0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:3b37e000 set TERM ph data[0]=0:3b37e000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f1d0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f1e0, OrigWordsRequested 0x600, DevSize 0x6 IdeReadWrite (REQ): Starting sector is 3904f1e0, Number of WORDS 0x600, DevSize 0x6 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:389de000 set TERM ph data[0]=0:389de000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f1e0, Count 0x6(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 600, WordsLeft 600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered c00, full size c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f1f0, OrigWordsRequested 0xe00, DevSize 0xe IdeReadWrite (REQ): Starting sector is 3904f1f0, Number of WORDS 0xe00, DevSize 0xe AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count 1c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:389a6000 ph data[0]=0:389a6000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:3895f000 set TERM ph data[1]=0:3895f000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f1f0, Count 0xe(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered e00, WordsLeft e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1c00, full size 1c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8940, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8940, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:38956000 ph data[0]=0:38956000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:38a5f000 ph data[1]=0:38a5f000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:38cf0000 ph data[2]=0:38cf0000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:38a51000 ph data[3]=0:38a51000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:38a0a000 ph data[4]=0:38a0a000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:38ad3000 ph data[5]=0:38ad3000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:38a3c000 ph data[6]=0:38a3c000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:389ed000 ph data[7]=0:389ed000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:38abe000 ph data[8]=0:38abe000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:38abf000 ph data[8]=0:38abe000 (1fff) get Phys(data[n=9+2000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:38cf8000 ph data[9]=0:38cf8000 (fff) get Phys(data[n=10+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:38a61000 ph data[10]=0:38a61000 (fff) get Phys(data[n=11+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:38ad2000 ph data[11]=0:38ad2000 (fff) get Phys(data[n=12+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:38adb000 ph data[12]=0:38adb000 (fff) get Phys(data[n=13+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:3895c000 ph data[13]=0:3895c000 (fff) get Phys(data[n=14+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:389fd000 set TERM ph data[14]=0:389fd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8940, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xf, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e89c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e89c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:38cf6000 ph data[0]=0:38cf6000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:3892f000 ph data[1]=0:3892f000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:38d00000 ph data[2]=0:38d00000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:38a59000 ph data[3]=0:38a59000 (fff) get Phys(data[n=4+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:38ada000 ph data[4]=0:38ada000 (fff) get Phys(data[n=5+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:38aeb000 ph data[5]=0:38aeb000 (fff) get Phys(data[n=6+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:3890c000 ph data[6]=0:3890c000 (fff) get Phys(data[n=7+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:38a0d000 ph data[7]=0:38a0d000 (fff) get Phys(data[n=8+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:38cfe000 ph data[8]=0:38cfe000 (fff) get Phys(data[n=9+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:38ac7000 ph data[9]=0:38ac7000 (fff) get Phys(data[n=10+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:38d08000 ph data[10]=0:38d08000 (fff) get Phys(data[n=11+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:38a69000 ph data[11]=0:38a69000 (fff) get Phys(data[n=12+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:38ae2000 ph data[12]=0:38ae2000 (fff) get Phys(data[n=13+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:38b0b000 ph data[13]=0:38b0b000 (fff) get Phys(data[n=14+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:38964000 ph data[14]=0:38964000 (fff) get Phys(data[n=15+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:38a15000 set TERM ph data[15]=0:38a15000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8a40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8a40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:3894e000 ph data[0]=0:3894e000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:38acf000 ph data[1]=0:38acf000 (fff) get Phys(data[n=2+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:38d10000 ph data[2]=0:38d10000 (fff) get Phys(data[n=3+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:38a71000 ph data[3]=0:38a71000 (fff) get Phys(data[n=4+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:38aea000 ph data[4]=0:38aea000 (fff) get Phys(data[n=5+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:38ae3000 ph data[5]=0:38ae3000 (fff) get Phys(data[n=6+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:38a44000 ph data[6]=0:38a44000 (fff) get Phys(data[n=7+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:38b3d000 ph data[7]=0:38b3d000 (fff) get Phys(data[n=8+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:38a1e000 ph data[8]=0:38a1e000 (fff) get Phys(data[n=9+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:38ad7000 ph data[9]=0:38ad7000 (fff) get Phys(data[n=10+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:38948000 ph data[10]=0:38948000 (fff) get Phys(data[n=11+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:38a79000 ph data[11]=0:38a79000 (fff) get Phys(data[n=12+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:38af2000 ph data[12]=0:38af2000 (fff) get Phys(data[n=13+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:38af3000 ph data[12]=0:38af2000 (1fff) get Phys(data[n=13+2000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:389ec000 ph data[13]=0:389ec000 (fff) get Phys(data[n=14+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:38a05000 set TERM ph data[14]=0:38a05000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8ac0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8ac0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:38a26000 ph data[0]=0:38a26000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:38adf000 ph data[1]=0:38adf000 (fff) get Phys(data[n=2+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:38950000 ph data[2]=0:38950000 (fff) get Phys(data[n=3+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:38a81000 ph data[3]=0:38a81000 (fff) get Phys(data[n=4+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:38afa000 ph data[4]=0:38afa000 (fff) get Phys(data[n=5+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:38933000 ph data[5]=0:38933000 (fff) get Phys(data[n=6+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:389f4000 ph data[6]=0:389f4000 (fff) get Phys(data[n=7+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:3892d000 ph data[7]=0:3892d000 (fff) get Phys(data[n=8+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:38a2e000 ph data[8]=0:38a2e000 (fff) get Phys(data[n=9+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:38ae7000 ph data[9]=0:38ae7000 (fff) get Phys(data[n=10+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:38958000 ph data[10]=0:38958000 (fff) get Phys(data[n=11+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:38a89000 ph data[11]=0:38a89000 (fff) get Phys(data[n=12+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:3893a000 ph data[12]=0:3893a000 (fff) get Phys(data[n=13+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:3893b000 ph data[12]=0:3893a000 (1fff) get Phys(data[n=13+2000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:389fc000 ph data[13]=0:389fc000 (fff) get Phys(data[n=14+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:38ab5000 set TERM ph data[14]=0:38ab5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69468 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e89c0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68788 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8a40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0xf, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68a0c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8ac0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8d40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8d40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bac000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2e5cb000 ph data[0]=0:2e5cb000 (fff) get Phys(data[n=1+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:38abc000 ph data[1]=0:38abc000 (fff) get Phys(data[n=2+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:38ae5000 ph data[2]=0:38ae5000 (fff) get Phys(data[n=3+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2eda6000 ph data[3]=0:2eda6000 (fff) get Phys(data[n=4+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:38a97000 ph data[4]=0:38a97000 (fff) get Phys(data[n=5+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:38a40000 ph data[5]=0:38a40000 (fff) get Phys(data[n=6+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:38b39000 ph data[6]=0:38b39000 (fff) get Phys(data[n=7+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:38aaa000 ph data[7]=0:38aaa000 (fff) get Phys(data[n=8+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:38aab000 ph data[7]=0:38aaa000 (1fff) get Phys(data[n=8+2000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:38ac4000 ph data[8]=0:38ac4000 (fff) get Phys(data[n=9+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:38935000 ph data[9]=0:38935000 (fff) get Phys(data[n=10+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:389ee000 ph data[10]=0:389ee000 (fff) get Phys(data[n=11+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:38a9f000 ph data[11]=0:38a9f000 (fff) get Phys(data[n=12+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:38960000 ph data[12]=0:38960000 (fff) get Phys(data[n=13+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:38b41000 ph data[13]=0:38b41000 (fff) get Phys(data[n=14+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:38ab2000 set TERM ph data[14]=0:38ab2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8d40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8dc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8dc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bbc000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:38ab3000 ph data[0]=0:38ab3000 (fff) get Phys(data[n=1+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:38acc000 ph data[1]=0:38acc000 (fff) get Phys(data[n=2+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:3893d000 ph data[2]=0:3893d000 (fff) get Phys(data[n=3+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:389f6000 ph data[3]=0:389f6000 (fff) get Phys(data[n=4+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:38aa7000 ph data[4]=0:38aa7000 (fff) get Phys(data[n=5+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:38968000 ph data[5]=0:38968000 (fff) get Phys(data[n=6+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:38b49000 ph data[6]=0:38b49000 (fff) get Phys(data[n=7+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:38aba000 ph data[7]=0:38aba000 (fff) get Phys(data[n=8+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:38943000 ph data[8]=0:38943000 (fff) get Phys(data[n=9+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:38ad4000 ph data[9]=0:38ad4000 (fff) get Phys(data[n=10+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:38a85000 ph data[10]=0:38a85000 (fff) get Phys(data[n=11+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:389fe000 ph data[11]=0:389fe000 (fff) get Phys(data[n=12+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:38aaf000 ph data[12]=0:38aaf000 (fff) get Phys(data[n=13+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:389f0000 ph data[13]=0:389f0000 (fff) get Phys(data[n=14+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:38b51000 ph data[14]=0:38b51000 (fff) get Phys(data[n=15+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:38ac2000 set TERM ph data[15]=0:38ac2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8e40, OrigWordsRequested 0x2800, DevSize 0x28 IdeReadWrite (REQ): Starting sector is 395e8e40, Number of WORDS 0x2800, DevSize 0x28 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bcc000, count 5000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:38a53000 ph data[0]=0:38a53000 (fff) get Phys(data[n=1+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:38adc000 ph data[1]=0:38adc000 (fff) get Phys(data[n=2+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:38a8d000 ph data[2]=0:38a8d000 (fff) get Phys(data[n=3+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:38a06000 ph data[3]=0:38a06000 (fff) get Phys(data[n=4+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:38947000 set TERM ph data[4]=0:38947000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68678 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8dc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b684f0 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8e40, Count 0x28(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x5, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2800, WordsLeft 2800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5000, full size 5000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8b40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8b40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:38b0f000 ph data[0]=0:38b0f000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:38aa8000 ph data[1]=0:38aa8000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:38b91000 ph data[2]=0:38b91000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:38b02000 ph data[3]=0:38b02000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:38b13000 ph data[4]=0:38b13000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:38b24000 ph data[5]=0:38b24000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:3891d000 ph data[6]=0:3891d000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:38a66000 ph data[7]=0:38a66000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:38b17000 ph data[8]=0:38b17000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:38ab0000 ph data[9]=0:38ab0000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:38b99000 ph data[10]=0:38b99000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:38b0a000 ph data[11]=0:38b0a000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:38b1b000 ph data[12]=0:38b1b000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:38b2c000 ph data[13]=0:38b2c000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:38925000 ph data[14]=0:38925000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:38a6e000 set TERM ph data[15]=0:38a6e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8b40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8bc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8bc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:38bb7000 ph data[0]=0:38bb7000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:38a48000 ph data[1]=0:38a48000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:38ba1000 ph data[2]=0:38ba1000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:38b12000 ph data[3]=0:38b12000 (fff) get Phys(data[n=4+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:388f3000 ph data[4]=0:388f3000 (fff) get Phys(data[n=5+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:38b34000 ph data[5]=0:38b34000 (fff) get Phys(data[n=6+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:38aed000 ph data[6]=0:38aed000 (fff) get Phys(data[n=7+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:38a76000 ph data[7]=0:38a76000 (fff) get Phys(data[n=8+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:38bbf000 ph data[8]=0:38bbf000 (fff) get Phys(data[n=9+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:38a50000 ph data[9]=0:38a50000 (fff) get Phys(data[n=10+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:38ba9000 ph data[10]=0:38ba9000 (fff) get Phys(data[n=11+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:38b1a000 ph data[11]=0:38b1a000 (fff) get Phys(data[n=12+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:38bc3000 ph data[12]=0:38bc3000 (fff) get Phys(data[n=13+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:38b3c000 ph data[13]=0:38b3c000 (fff) get Phys(data[n=14+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:38af5000 ph data[14]=0:38af5000 (fff) get Phys(data[n=15+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:38a7e000 set TERM ph data[15]=0:38a7e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8c40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8c40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:38bc7000 ph data[0]=0:38bc7000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:38a58000 ph data[1]=0:38a58000 (fff) get Phys(data[n=2+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:38bb1000 ph data[2]=0:38bb1000 (fff) get Phys(data[n=3+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:38b22000 ph data[3]=0:38b22000 (fff) get Phys(data[n=4+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:38bcb000 ph data[4]=0:38bcb000 (fff) get Phys(data[n=5+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:38b44000 ph data[5]=0:38b44000 (fff) get Phys(data[n=6+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:38afd000 ph data[6]=0:38afd000 (fff) get Phys(data[n=7+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:3890e000 ph data[7]=0:3890e000 (fff) get Phys(data[n=8+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:38bcf000 ph data[8]=0:38bcf000 (fff) get Phys(data[n=9+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:38a60000 ph data[9]=0:38a60000 (fff) get Phys(data[n=10+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:38bb9000 ph data[10]=0:38bb9000 (fff) get Phys(data[n=11+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:388f2000 ph data[11]=0:388f2000 (fff) get Phys(data[n=12+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:38bd3000 ph data[12]=0:38bd3000 (fff) get Phys(data[n=13+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:38b4c000 ph data[13]=0:38b4c000 (fff) get Phys(data[n=14+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:38b05000 ph data[14]=0:38b05000 (fff) get Phys(data[n=15+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:38916000 set TERM ph data[15]=0:38916000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59484 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8bc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8cc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8cc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:38bd7000 ph data[0]=0:38bd7000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:38a68000 ph data[1]=0:38a68000 (fff) get Phys(data[n=2+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:38909000 ph data[2]=0:38909000 (fff) get Phys(data[n=3+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:38bd2000 ph data[3]=0:38bd2000 (fff) get Phys(data[n=4+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:38bdb000 ph data[4]=0:38bdb000 (fff) get Phys(data[n=5+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:38924000 ph data[5]=0:38924000 (fff) get Phys(data[n=6+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:38b0d000 ph data[6]=0:38b0d000 (fff) get Phys(data[n=7+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:38b1e000 ph data[7]=0:38b1e000 (fff) get Phys(data[n=8+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:38bdf000 ph data[8]=0:38bdf000 (fff) get Phys(data[n=9+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:38a78000 ph data[9]=0:38a78000 (fff) get Phys(data[n=10+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:38b61000 ph data[10]=0:38b61000 (fff) get Phys(data[n=11+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:38bda000 ph data[11]=0:38bda000 (fff) get Phys(data[n=12+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:38be3000 ph data[12]=0:38be3000 (fff) get Phys(data[n=13+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:38af4000 ph data[13]=0:38af4000 (fff) get Phys(data[n=14+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:388f5000 ph data[14]=0:388f5000 (fff) get Phys(data[n=15+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:38b26000 set TERM ph data[15]=0:38b26000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8c40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68568 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8cc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:38bc0000 ph data[0]=0:38bc0000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:38c61000 set TERM ph data[1]=0:38c61000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcff90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcff90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:3c4dd000 ph data[0]=0:3c4dd000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:3f906000 ph data[1]=0:3f906000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:3b2ef000 ph data[2]=0:3b2ef000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:3f6e8000 ph data[3]=0:3f6e8000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:3b359000 ph data[4]=0:3b359000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:3d7d2000 ph data[5]=0:3d7d2000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:3bd93000 ph data[6]=0:3bd93000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:3f8e4000 ph data[7]=0:3f8e4000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:2ed8d000 ph data[8]=0:2ed8d000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2e42e000 ph data[9]=0:2e42e000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:2ed8f000 ph data[10]=0:2ed8f000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:3f6e0000 ph data[11]=0:3f6e0000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:3b351000 ph data[12]=0:3b351000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:2e5c2000 ph data[13]=0:2e5c2000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:2e593000 ph data[14]=0:2e593000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:2eda4000 set TERM ph data[15]=0:2eda4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcff90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:2ed85000 ph data[0]=0:2ed85000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:2e426000 ph data[1]=0:2e426000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:2ed87000 ph data[2]=0:2ed87000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2e410000 ph data[3]=0:2e410000 (fff) get Phys(data[n=4+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:2e5d9000 ph data[4]=0:2e5d9000 (fff) get Phys(data[n=5+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:2e5ba000 ph data[5]=0:2e5ba000 (fff) get Phys(data[n=6+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2edb3000 ph data[6]=0:2edb3000 (fff) get Phys(data[n=7+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:2ed9c000 ph data[7]=0:2ed9c000 (fff) get Phys(data[n=8+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:2ed7d000 ph data[8]=0:2ed7d000 (fff) get Phys(data[n=9+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:2e41e000 ph data[9]=0:2e41e000 (fff) get Phys(data[n=10+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:2ed7f000 ph data[10]=0:2ed7f000 (fff) get Phys(data[n=11+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:2e408000 ph data[11]=0:2e408000 (fff) get Phys(data[n=12+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:2e5d1000 ph data[12]=0:2e5d1000 (fff) get Phys(data[n=13+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2e5b2000 ph data[13]=0:2e5b2000 (fff) get Phys(data[n=14+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:2edab000 ph data[14]=0:2edab000 (fff) get Phys(data[n=15+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:2ed94000 set TERM ph data[15]=0:2ed94000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:2ed75000 ph data[0]=0:2ed75000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:2e416000 ph data[1]=0:2e416000 (fff) get Phys(data[n=2+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:2ed77000 ph data[2]=0:2ed77000 (fff) get Phys(data[n=3+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:2e4f0000 ph data[3]=0:2e4f0000 (fff) get Phys(data[n=4+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2e5c9000 ph data[4]=0:2e5c9000 (fff) get Phys(data[n=5+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:2e5aa000 ph data[5]=0:2e5aa000 (fff) get Phys(data[n=6+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:2eda3000 ph data[6]=0:2eda3000 (fff) get Phys(data[n=7+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:2ed8c000 ph data[7]=0:2ed8c000 (fff) get Phys(data[n=8+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:2e445000 ph data[8]=0:2e445000 (fff) get Phys(data[n=9+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:2e40e000 ph data[9]=0:2e40e000 (fff) get Phys(data[n=10+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2ed6f000 ph data[10]=0:2ed6f000 (fff) get Phys(data[n=11+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:2e4e8000 ph data[11]=0:2e4e8000 (fff) get Phys(data[n=12+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:2e5c1000 ph data[12]=0:2e5c1000 (fff) get Phys(data[n=13+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2e5a2000 ph data[13]=0:2e5a2000 (fff) get Phys(data[n=14+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:2ed9b000 ph data[14]=0:2ed9b000 (fff) get Phys(data[n=15+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:2ed84000 set TERM ph data[15]=0:2ed84000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:2e43d000 ph data[0]=0:2e43d000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:2e406000 ph data[1]=0:2e406000 (fff) get Phys(data[n=2+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:2e43f000 ph data[2]=0:2e43f000 (fff) get Phys(data[n=3+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2e4a0000 ph data[3]=0:2e4a0000 (fff) get Phys(data[n=4+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2e5b9000 ph data[4]=0:2e5b9000 (fff) get Phys(data[n=5+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:2eda2000 ph data[5]=0:2eda2000 (fff) get Phys(data[n=6+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2ed93000 ph data[6]=0:2ed93000 (fff) get Phys(data[n=7+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:2ed7c000 ph data[7]=0:2ed7c000 (fff) get Phys(data[n=8+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:2e435000 ph data[8]=0:2e435000 (fff) get Phys(data[n=9+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:2e4f6000 ph data[9]=0:2e4f6000 (fff) get Phys(data[n=10+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2e437000 ph data[10]=0:2e437000 (fff) get Phys(data[n=11+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:2e498000 ph data[11]=0:2e498000 (fff) get Phys(data[n=12+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:2e5b1000 ph data[12]=0:2e5b1000 (fff) get Phys(data[n=13+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:2ed9a000 ph data[13]=0:2ed9a000 (fff) get Phys(data[n=14+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:2ed8b000 ph data[14]=0:2ed8b000 (fff) get Phys(data[n=15+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:2e444000 set TERM ph data[15]=0:2e444000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7b0, OrigWordsRequested 0x1900, DevSize 0x19 IdeReadWrite (REQ): Starting sector is 3904e7b0, Number of WORDS 0x1900, DevSize 0x19 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b8e000, count 3200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b8e000) AtapiVirtToPhysAddr_: f6b8e000 -> 00000000:2e42d000 ph data[0]=0:2e42d000 (fff) get Phys(data[n=1+1000]=f6b8f000) AtapiVirtToPhysAddr_: f6b8f000 -> 00000000:2e4ee000 ph data[1]=0:2e4ee000 (fff) get Phys(data[n=2+1000]=f6b90000) AtapiVirtToPhysAddr_: f6b90000 -> 00000000:2e42f000 ph data[2]=0:2e42f000 (fff) get Phys(data[n=3+1000]=f6b91000) AtapiVirtToPhysAddr_: f6b91000 -> 00000000:2e490000 set TERM ph data[3]=0:2e490000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e44930 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7b0, Count 0x19(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1900, WordsLeft 1900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3200, full size 3200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcff90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcff90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:38bc5000 ph data[0]=0:38bc5000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:38b46000 ph data[1]=0:38b46000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:388f7000 ph data[2]=0:388f7000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:38b30000 ph data[3]=0:38b30000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:38b89000 ph data[4]=0:38b89000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:38bea000 ph data[5]=0:38bea000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:38903000 ph data[6]=0:38903000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:38b0c000 ph data[7]=0:38b0c000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:2e475000 ph data[8]=0:2e475000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:38b36000 ph data[9]=0:38b36000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:38be7000 ph data[10]=0:38be7000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:38b28000 ph data[11]=0:38b28000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:38b81000 ph data[12]=0:38b81000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:3892a000 ph data[13]=0:3892a000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:388fb000 ph data[14]=0:388fb000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:38b04000 set TERM ph data[15]=0:38b04000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcff90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:38a6d000 ph data[0]=0:38a6d000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:38a5e000 ph data[1]=0:38a5e000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:38b07000 ph data[2]=0:38b07000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:38b20000 ph data[3]=0:38b20000 (fff) get Phys(data[n=4+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:38b79000 ph data[4]=0:38b79000 (fff) get Phys(data[n=5+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:38922000 ph data[5]=0:38922000 (fff) get Phys(data[n=6+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:2e4eb000 ph data[6]=0:2e4eb000 (fff) get Phys(data[n=7+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:38914000 ph data[7]=0:38914000 (fff) get Phys(data[n=8+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:38a65000 ph data[8]=0:38a65000 (fff) get Phys(data[n=9+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:38a56000 ph data[9]=0:38a56000 (fff) get Phys(data[n=10+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:38aff000 ph data[10]=0:38aff000 (fff) get Phys(data[n=11+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:38918000 ph data[11]=0:38918000 (fff) get Phys(data[n=12+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:38901000 ph data[12]=0:38901000 (fff) get Phys(data[n=13+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:2e602000 ph data[13]=0:2e602000 (fff) get Phys(data[n=14+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:38b33000 ph data[14]=0:38b33000 (fff) get Phys(data[n=15+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:2e494000 set TERM ph data[15]=0:2e494000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:38a55000 ph data[0]=0:38a55000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:2e44e000 ph data[1]=0:2e44e000 (fff) get Phys(data[n=2+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:38af7000 ph data[2]=0:38af7000 (fff) get Phys(data[n=3+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:38a80000 ph data[3]=0:38a80000 (fff) get Phys(data[n=4+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:388f9000 ph data[4]=0:388f9000 (fff) get Phys(data[n=5+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:2e412000 ph data[5]=0:2e412000 (fff) get Phys(data[n=6+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:38b2b000 ph data[6]=0:38b2b000 (fff) get Phys(data[n=7+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:38aac000 ph data[7]=0:38aac000 (fff) get Phys(data[n=8+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:38a4d000 ph data[8]=0:38a4d000 (fff) get Phys(data[n=9+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:3893e000 ph data[9]=0:3893e000 (fff) get Phys(data[n=10+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:2e487000 ph data[10]=0:2e487000 (fff) get Phys(data[n=11+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:38aa0000 ph data[11]=0:38aa0000 (fff) get Phys(data[n=12+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:2e559000 ph data[12]=0:2e559000 (fff) get Phys(data[n=13+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:38a92000 ph data[13]=0:38a92000 (fff) get Phys(data[n=14+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:38b23000 ph data[14]=0:38b23000 (fff) get Phys(data[n=15+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:38a94000 set TERM ph data[15]=0:38a94000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68a44 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:2e5a5000 ph data[0]=0:2e5a5000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:38936000 ph data[1]=0:38936000 (fff) get Phys(data[n=2+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:38b1f000 ph data[2]=0:38b1f000 (fff) get Phys(data[n=3+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:38a98000 ph data[3]=0:38a98000 (fff) get Phys(data[n=4+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:2e439000 ph data[4]=0:2e439000 (fff) get Phys(data[n=5+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:38a8a000 ph data[5]=0:38a8a000 (fff) get Phys(data[n=6+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:38913000 ph data[6]=0:38913000 (fff) get Phys(data[n=7+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:38a8c000 ph data[7]=0:38a8c000 (fff) get Phys(data[n=8+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:38cad000 ph data[8]=0:38cad000 (fff) get Phys(data[n=9+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:38ae6000 ph data[9]=0:38ae6000 (fff) get Phys(data[n=10+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:38917000 ph data[10]=0:38917000 (fff) get Phys(data[n=11+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:2e4e0000 ph data[11]=0:2e4e0000 (fff) get Phys(data[n=12+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:38b21000 ph data[12]=0:38b21000 (fff) get Phys(data[n=13+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:38a82000 ph data[13]=0:38a82000 (fff) get Phys(data[n=14+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:3890b000 ph data[14]=0:3890b000 (fff) get Phys(data[n=15+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:38c9c000 set TERM ph data[15]=0:38c9c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b593f8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f9c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcff90, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fcff90, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:3c4dd000 ph data[0]=0:3c4dd000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:3f906000 set TERM ph data[1]=0:3f906000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcff90, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f90 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b9c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:38b7a000 ph data[0]=0:38b7a000 (fff) get Phys(data[n=1+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:38a83000 ph data[1]=0:38a83000 (fff) get Phys(data[n=2+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:38b1c000 ph data[2]=0:38b1c000 (fff) get Phys(data[n=3+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:388fd000 ph data[3]=0:388fd000 (fff) get Phys(data[n=4+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:38ade000 ph data[4]=0:38ade000 (fff) get Phys(data[n=5+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:38a7f000 ph data[5]=0:38a7f000 (fff) get Phys(data[n=6+1000]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:38930000 ph data[6]=0:38930000 (fff) get Phys(data[n=7+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:388d9000 ph data[7]=0:388d9000 (fff) get Phys(data[n=8+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:38b72000 ph data[8]=0:38b72000 (fff) get Phys(data[n=9+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:38beb000 ph data[9]=0:38beb000 (fff) get Phys(data[n=10+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:388f4000 ph data[10]=0:388f4000 (fff) get Phys(data[n=11+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:38be5000 ph data[11]=0:38be5000 (fff) get Phys(data[n=12+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:38ad6000 ph data[12]=0:38ad6000 (fff) get Phys(data[n=13+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:38b77000 ph data[13]=0:38b77000 (fff) get Phys(data[n=14+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:38b10000 ph data[14]=0:38b10000 (fff) get Phys(data[n=15+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:38bf9000 set TERM ph data[15]=0:38bf9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f90 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bac000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:38b9a000 ph data[0]=0:38b9a000 (fff) get Phys(data[n=1+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:38ba3000 ph data[1]=0:38ba3000 (fff) get Phys(data[n=2+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:38aa4000 ph data[2]=0:38aa4000 (fff) get Phys(data[n=3+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:38ab5000 ph data[3]=0:38ab5000 (fff) get Phys(data[n=4+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:38bd6000 ph data[4]=0:38bd6000 (fff) get Phys(data[n=5+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:38b6f000 ph data[5]=0:38b6f000 (fff) get Phys(data[n=6+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:38b38000 ph data[6]=0:38b38000 (fff) get Phys(data[n=7+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:38b19000 ph data[7]=0:38b19000 (fff) get Phys(data[n=8+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:388fa000 ph data[8]=0:388fa000 (fff) get Phys(data[n=9+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:38b9b000 ph data[9]=0:38b9b000 (fff) get Phys(data[n=10+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:38a9c000 ph data[10]=0:38a9c000 (fff) get Phys(data[n=11+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:3892d000 ph data[11]=0:3892d000 (fff) get Phys(data[n=12+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:38d26000 ph data[12]=0:38d26000 (fff) get Phys(data[n=13+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:38b8f000 ph data[13]=0:38b8f000 (fff) get Phys(data[n=14+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:38ab8000 ph data[14]=0:38ab8000 (fff) get Phys(data[n=15+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:38a89000 set TERM ph data[15]=0:38a89000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd0290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bbc000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:38be2000 ph data[0]=0:38be2000 (fff) get Phys(data[n=1+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:3896b000 ph data[1]=0:3896b000 (fff) get Phys(data[n=2+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:38cfc000 ph data[2]=0:38cfc000 (fff) get Phys(data[n=3+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:38a05000 ph data[3]=0:38a05000 (fff) get Phys(data[n=4+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:38aee000 ph data[4]=0:38aee000 (fff) get Phys(data[n=5+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:38ae7000 ph data[5]=0:38ae7000 (fff) get Phys(data[n=6+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:38958000 ph data[6]=0:38958000 (fff) get Phys(data[n=7+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:38a81000 ph data[7]=0:38a81000 (fff) get Phys(data[n=8+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:3895a000 ph data[8]=0:3895a000 (fff) get Phys(data[n=9+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:3893b000 ph data[9]=0:3893b000 (fff) get Phys(data[n=10+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:389fc000 ph data[10]=0:389fc000 (fff) get Phys(data[n=11+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:38b3d000 ph data[11]=0:38b3d000 (fff) get Phys(data[n=12+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:38a2e000 ph data[12]=0:38a2e000 (fff) get Phys(data[n=13+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:38adf000 ph data[13]=0:38adf000 (fff) get Phys(data[n=14+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:38950000 ph data[14]=0:38950000 (fff) get Phys(data[n=15+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:38a79000 set TERM ph data[15]=0:38a79000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68e64 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd0310, OrigWordsRequested 0x2d00, DevSize 0x2d IdeReadWrite (REQ): Starting sector is 38fd0310, Number of WORDS 0x2d00, DevSize 0x2d AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bcc000, count 5a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:3893a000 ph data[0]=0:3893a000 (fff) get Phys(data[n=1+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:38933000 ph data[1]=0:38933000 (fff) get Phys(data[n=2+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:389f4000 ph data[2]=0:389f4000 (fff) get Phys(data[n=3+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:38a15000 ph data[3]=0:38a15000 (fff) get Phys(data[n=4+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:38a26000 ph data[4]=0:38a26000 (fff) get Phys(data[n=5+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:38ad7000 set TERM ph data[5]=0:38ad7000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59ad8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd0310, Count 0x2d(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x6, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:38ae3000 ph data[0]=0:38ae3000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:38a44000 set TERM ph data[1]=0:38a44000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2d00, WordsLeft 2d00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5a00, full size 5a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7d0, OrigWordsRequested 0xa00, DevSize 0xa IdeReadWrite (REQ): Starting sector is 3904e7d0, Number of WORDS 0xa00, DevSize 0xa AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c84000, count 1400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:38bf3000 ph data[0]=0:38bf3000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:38afc000 set TERM ph data[1]=0:38afc000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7d0, Count 0xa(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered a00, WordsLeft a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1400, full size 1400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:388e3000 ph data[0]=0:388e3000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38bb4000 set TERM ph data[1]=0:38bb4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2ed83000 ph data[0]=0:2ed83000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e444000 set TERM ph data[1]=0:2e444000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2a243000 ph data[0]=0:2a243000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38be4000 set TERM ph data[1]=0:38be4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68bc0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38a9f000 set TERM ph data[0]=0:38a9f000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7e0, OrigWordsRequested 0xa00, DevSize 0xa IdeReadWrite (REQ): Starting sector is 3904e7e0, Number of WORDS 0xa00, DevSize 0xa AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c84000, count 1400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:38a6b000 ph data[0]=0:38a6b000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:38aec000 set TERM ph data[1]=0:38aec000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59128 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7e0, Count 0xa(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered a00, WordsLeft a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1400, full size 1400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b04 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38970000 ph data[0]=0:38970000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38ae9000 set TERM ph data[1]=0:38ae9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68690 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:389b8000 ph data[0]=0:389b8000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38a11000 set TERM ph data[1]=0:38a11000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68bc0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e440000 set TERM ph data[0]=0:2e440000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff7b90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff7b90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b92000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b92000) AtapiVirtToPhysAddr_: f6b92000 -> 00000000:3b352000 ph data[0]=0:3b352000 (fff) get Phys(data[n=1+1000]=f6b93000) AtapiVirtToPhysAddr_: f6b93000 -> 00000000:3b363000 ph data[1]=0:3b363000 (fff) get Phys(data[n=2+1000]=f6b94000) AtapiVirtToPhysAddr_: f6b94000 -> 00000000:3b2ec000 ph data[2]=0:3b2ec000 (fff) get Phys(data[n=3+1000]=f6b95000) AtapiVirtToPhysAddr_: f6b95000 -> 00000000:3bdb5000 ph data[3]=0:3bdb5000 (fff) get Phys(data[n=4+1000]=f6b96000) AtapiVirtToPhysAddr_: f6b96000 -> 00000000:3f8de000 ph data[4]=0:3f8de000 (fff) get Phys(data[n=5+1000]=f6b97000) AtapiVirtToPhysAddr_: f6b97000 -> 00000000:3899f000 ph data[5]=0:3899f000 (fff) get Phys(data[n=6+1000]=f6b98000) AtapiVirtToPhysAddr_: f6b98000 -> 00000000:3f8d0000 ph data[6]=0:3f8d0000 (fff) get Phys(data[n=7+1000]=f6b99000) AtapiVirtToPhysAddr_: f6b99000 -> 00000000:389e9000 ph data[7]=0:389e9000 (fff) get Phys(data[n=8+1000]=f6b9a000) AtapiVirtToPhysAddr_: f6b9a000 -> 00000000:3899a000 ph data[8]=0:3899a000 (fff) get Phys(data[n=9+1000]=f6b9b000) AtapiVirtToPhysAddr_: f6b9b000 -> 00000000:2e5b3000 ph data[9]=0:2e5b3000 (fff) get Phys(data[n=10+1000]=f6b9c000) AtapiVirtToPhysAddr_: f6b9c000 -> 00000000:3b2f4000 ph data[10]=0:3b2f4000 (fff) get Phys(data[n=11+1000]=f6b9d000) AtapiVirtToPhysAddr_: f6b9d000 -> 00000000:3bdad000 ph data[11]=0:3bdad000 (fff) get Phys(data[n=12+1000]=f6b9e000) AtapiVirtToPhysAddr_: f6b9e000 -> 00000000:2ed8e000 ph data[12]=0:2ed8e000 (fff) get Phys(data[n=13+1000]=f6b9f000) AtapiVirtToPhysAddr_: f6b9f000 -> 00000000:38987000 ph data[13]=0:38987000 (fff) get Phys(data[n=14+1000]=f6ba0000) AtapiVirtToPhysAddr_: f6ba0000 -> 00000000:3f700000 ph data[14]=0:3f700000 (fff) get Phys(data[n=15+1000]=f6ba1000) AtapiVirtToPhysAddr_: f6ba1000 -> 00000000:389e1000 set TERM ph data[15]=0:389e1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff7b90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff7c10, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff7c10, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6ba2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6ba2000) AtapiVirtToPhysAddr_: f6ba2000 -> 00000000:38992000 ph data[0]=0:38992000 (fff) get Phys(data[n=1+1000]=f6ba3000) AtapiVirtToPhysAddr_: f6ba3000 -> 00000000:38a4b000 ph data[1]=0:38a4b000 (fff) get Phys(data[n=2+1000]=f6ba4000) AtapiVirtToPhysAddr_: f6ba4000 -> 00000000:389b4000 ph data[2]=0:389b4000 (fff) get Phys(data[n=3+1000]=f6ba5000) AtapiVirtToPhysAddr_: f6ba5000 -> 00000000:2e54d000 ph data[3]=0:2e54d000 (fff) get Phys(data[n=4+1000]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:3b356000 ph data[4]=0:3b356000 (fff) get Phys(data[n=5+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:38997000 ph data[5]=0:38997000 (fff) get Phys(data[n=6+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:3f6f8000 ph data[6]=0:3f6f8000 (fff) get Phys(data[n=7+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:38a29000 ph data[7]=0:38a29000 (fff) get Phys(data[n=8+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:3898a000 ph data[8]=0:3898a000 (fff) get Phys(data[n=9+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:3899b000 ph data[9]=0:3899b000 (fff) get Phys(data[n=10+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:3896c000 ph data[10]=0:3896c000 (fff) get Phys(data[n=11+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:389e5000 ph data[11]=0:389e5000 (fff) get Phys(data[n=12+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:3b34e000 ph data[12]=0:3b34e000 (fff) get Phys(data[n=13+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:3f6df000 ph data[13]=0:3f6df000 (fff) get Phys(data[n=14+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:3b338000 ph data[14]=0:3b338000 (fff) get Phys(data[n=15+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:38a21000 set TERM ph data[15]=0:38a21000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff7c90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff7c90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bb2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:3f92a000 ph data[0]=0:3f92a000 (fff) get Phys(data[n=1+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:2e5ab000 ph data[1]=0:2e5ab000 (fff) get Phys(data[n=2+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:3f87c000 ph data[2]=0:3f87c000 (fff) get Phys(data[n=3+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:389dd000 ph data[3]=0:389dd000 (fff) get Phys(data[n=4+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:2ed7e000 ph data[4]=0:2ed7e000 (fff) get Phys(data[n=5+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:3f8ef000 ph data[5]=0:3f8ef000 (fff) get Phys(data[n=6+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:3bdd0000 ph data[6]=0:3bdd0000 (fff) get Phys(data[n=7+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:38ac9000 ph data[7]=0:38ac9000 (fff) get Phys(data[n=8+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:3f6ca000 ph data[8]=0:3f6ca000 (fff) get Phys(data[n=9+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:3f8fb000 ph data[9]=0:3f8fb000 (fff) get Phys(data[n=10+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:3f6c4000 ph data[10]=0:3f6c4000 (fff) get Phys(data[n=11+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:3f925000 ph data[11]=0:3f925000 (fff) get Phys(data[n=12+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:2ed9e000 ph data[12]=0:2ed9e000 (fff) get Phys(data[n=13+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2e597000 ph data[13]=0:2e597000 (fff) get Phys(data[n=14+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:3f710000 ph data[14]=0:3f710000 (fff) get Phys(data[n=15+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:3f8f1000 set TERM ph data[15]=0:3f8f1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68b70 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff7d10, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff7d10, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bc2000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:3f932000 ph data[0]=0:3f932000 (fff) get Phys(data[n=1+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:389d3000 ph data[1]=0:389d3000 (fff) get Phys(data[n=2+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:2e5ac000 ph data[2]=0:2e5ac000 (fff) get Phys(data[n=3+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2e59d000 ph data[3]=0:2e59d000 (fff) get Phys(data[n=4+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:3b2f6000 ph data[4]=0:3b2f6000 (fff) get Phys(data[n=5+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:2e59f000 ph data[5]=0:2e59f000 (fff) get Phys(data[n=6+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:3f8a8000 ph data[6]=0:3f8a8000 (fff) get Phys(data[n=7+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:389d1000 ph data[7]=0:389d1000 (fff) get Phys(data[n=8+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:3b342000 ph data[8]=0:3b342000 (fff) get Phys(data[n=9+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:389c3000 ph data[9]=0:389c3000 (fff) get Phys(data[n=10+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:2e5b4000 ph data[10]=0:2e5b4000 (fff) get Phys(data[n=11+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:3b37d000 ph data[11]=0:3b37d000 (fff) get Phys(data[n=12+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:3b2ee000 ph data[12]=0:3b2ee000 (fff) get Phys(data[n=13+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:3896f000 ph data[13]=0:3896f000 (fff) get Phys(data[n=14+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:2ed70000 ph data[14]=0:2ed70000 (fff) get Phys(data[n=15+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:2e5f9000 set TERM ph data[15]=0:2e5f9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3cac2000 ph data[0]=0:3cac2000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:389bb000 set TERM ph data[1]=0:389bb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff7c10, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff7c90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5ed8c78 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff7d10, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e44930 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e44930, CDB 0xb5e44960, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e44930 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e44930, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e44930 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f9c ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff7b90, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38ff7b90, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c84000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:3d7d2000 ph data[0]=0:3d7d2000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:2e593000 set TERM ph data[1]=0:2e593000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff7b90, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68bc0 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd26a0, OrigWordsRequested 0x4700, DevSize 0x47 IdeReadWrite (REQ): Starting sector is 38fd26a0, Number of WORDS 0x4700, DevSize 0x47 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c0c000, count 8e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:2ed77000 ph data[0]=0:2ed77000 (fff) get Phys(data[n=1+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:2e4a0000 ph data[1]=0:2e4a0000 (fff) get Phys(data[n=2+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:2e5b1000 ph data[2]=0:2e5b1000 (fff) get Phys(data[n=3+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:2e5a2000 ph data[3]=0:2e5a2000 (fff) get Phys(data[n=4+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:2ed93000 ph data[4]=0:2ed93000 (fff) get Phys(data[n=5+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:2ed84000 ph data[5]=0:2ed84000 (fff) get Phys(data[n=6+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:38b65000 ph data[6]=0:38b65000 (fff) get Phys(data[n=7+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2e4f6000 ph data[7]=0:2e4f6000 (fff) get Phys(data[n=8+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:2ed6f000 set TERM ph data[8]=0:2ed6f000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd26a0, Count 0x47(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x9, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7f0, OrigWordsRequested 0xf00, DevSize 0xf IdeReadWrite (REQ): Starting sector is 3904e7f0, Number of WORDS 0xf00, DevSize 0xf AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c84000, count 1e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:38aa7000 ph data[0]=0:38aa7000 (fff) get Phys(data[n=1+1000]=f6c85000) AtapiVirtToPhysAddr_: f6c85000 -> 00000000:389f8000 set TERM ph data[1]=0:389f8000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4700, WordsLeft 4700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8e00, full size 8e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ed8c78, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ed8c78 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7f0, Count 0xf(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered f00, WordsLeft f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1e00, full size 1e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ed8c78, CDB 0xb5ed8ca8, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ed8c78 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f9c ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd26a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fd26a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2ed87000 ph data[0]=0:2ed87000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e408000 set TERM ph data[1]=0:2e408000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd26a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ed8c78 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelTopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e840, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 3904e840, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f6f6000 set TERM ph data[0]=0:3f6f6000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e840, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x1, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:389d5000 ph data[0]=0:389d5000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2ed96000 set TERM ph data[1]=0:2ed96000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e850, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 3904e850, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f838000 ph data[0]=0:3f838000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f919000 set TERM ph data[1]=0:3f919000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e850, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e550000 ph data[0]=0:2e550000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e541000 set TERM ph data[1]=0:2e541000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e860, OrigWordsRequested 0x5800, DevSize 0x58 IdeReadWrite (REQ): Starting sector is 3904e860, Number of WORDS 0x5800, DevSize 0x58 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c0a000, count b000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38b40000 ph data[0]=0:38b40000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38c79000 ph data[1]=0:38c79000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38c22000 ph data[2]=0:38c22000 (fff) get Phys(data[n=3+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:38c7b000 ph data[3]=0:38c7b000 (fff) get Phys(data[n=4+1000]=f6c0e000) AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:38b64000 ph data[4]=0:38b64000 (fff) get Phys(data[n=5+1000]=f6c0f000) AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:3c4dd000 ph data[5]=0:3c4dd000 (fff) get Phys(data[n=6+1000]=f6c10000) AtapiVirtToPhysAddr_: f6c10000 -> 00000000:38b16000 ph data[6]=0:38b16000 (fff) get Phys(data[n=7+1000]=f6c11000) AtapiVirtToPhysAddr_: f6c11000 -> 00000000:38907000 ph data[7]=0:38907000 (fff) get Phys(data[n=8+1000]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:38b48000 ph data[8]=0:38b48000 (fff) get Phys(data[n=9+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:2afb9000 ph data[9]=0:2afb9000 (fff) get Phys(data[n=10+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:388da000 set TERM ph data[10]=0:388da000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e860, Count 0x58(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0xb, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5800, WordsLeft 5800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered b000, full size b000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38ce8000 ph data[0]=0:38ce8000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38b49000 set TERM ph data[1]=0:38b49000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e8c0, OrigWordsRequested 0xd00, DevSize 0xd IdeReadWrite (REQ): Starting sector is 3904e8c0, Number of WORDS 0xd00, DevSize 0xd AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f6cb000 ph data[0]=0:3f6cb000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f894000 set TERM ph data[1]=0:3f894000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e8c0, Count 0xd(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered d00, WordsLeft d00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1a00, full size 1a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:389db000 ph data[0]=0:389db000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3b354000 set TERM ph data[1]=0:3b354000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e8d0, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 3904e8d0, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c12000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:38ab3000 ph data[0]=0:38ab3000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38b3c000 ph data[1]=0:38b3c000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:38935000 set TERM ph data[2]=0:38935000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e8d0, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x3, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38bcb000 ph data[0]=0:38bcb000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38b24000 set TERM ph data[1]=0:38b24000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e8f0, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 3904e8f0, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c12000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:388f3000 ph data[0]=0:388f3000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:38ce4000 ph data[1]=0:38ce4000 (fff) get Phys(data[n=2+1000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:3891d000 set TERM ph data[2]=0:3891d000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e8f0, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x3, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38d4b000 ph data[0]=0:38d4b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38c74000 set TERM ph data[1]=0:38c74000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e910, OrigWordsRequested 0xb00, DevSize 0xb IdeReadWrite (REQ): Starting sector is 3904e910, Number of WORDS 0xb00, DevSize 0xb AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38c63000 ph data[0]=0:38c63000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38c6c000 set TERM ph data[1]=0:38c6c000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e910, Count 0xb(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered b00, WordsLeft b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1600, full size 1600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e63b000 ph data[0]=0:2e63b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e654000 set TERM ph data[1]=0:2e654000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e920, OrigWordsRequested 0xb00, DevSize 0xb IdeReadWrite (REQ): Starting sector is 3904e920, Number of WORDS 0xb00, DevSize 0xb AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38a5b000 ph data[0]=0:38a5b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38aec000 set TERM ph data[1]=0:38aec000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e920, Count 0xb(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered b00, WordsLeft b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1600, full size 1600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38b13000 ph data[0]=0:38b13000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38bac000 set TERM ph data[1]=0:38bac000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e930, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e930, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38c3e000 ph data[0]=0:38c3e000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38d3f000 set TERM ph data[1]=0:38d3f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e930, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:388de000 ph data[0]=0:388de000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38d67000 set TERM ph data[1]=0:38d67000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e940, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904e940, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:38c56000 ph data[0]=0:38c56000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:38c97000 ph data[1]=0:38c97000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:38c40000 ph data[2]=0:38c40000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:377f9000 ph data[3]=0:377f9000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:388ba000 ph data[4]=0:388ba000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:38c93000 ph data[5]=0:38c93000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:38d7c000 ph data[6]=0:38d7c000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:38d6d000 ph data[7]=0:38d6d000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:38c4e000 ph data[8]=0:38c4e000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:38c8f000 ph data[9]=0:38c8f000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:38c38000 ph data[10]=0:38c38000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:377f1000 ph data[11]=0:377f1000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:38d7a000 ph data[12]=0:38d7a000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:388d3000 ph data[13]=0:388d3000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:38d74000 ph data[14]=0:38d74000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:38d65000 set TERM ph data[15]=0:38d65000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e940, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e9c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904e9c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:38c46000 ph data[0]=0:38c46000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:38d47000 ph data[1]=0:38d47000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:38c30000 ph data[2]=0:38c30000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:377d9000 ph data[3]=0:377d9000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:38d72000 ph data[4]=0:38d72000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:38d43000 ph data[5]=0:38d43000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:38d6c000 ph data[6]=0:38d6c000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:38d5d000 ph data[7]=0:38d5d000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:38c3e000 ph data[8]=0:38c3e000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:38d3f000 ph data[9]=0:38d3f000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:38c28000 ph data[10]=0:38c28000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:38d19000 ph data[11]=0:38d19000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:388b2000 ph data[12]=0:388b2000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:388c3000 ph data[13]=0:388c3000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:38c54000 ph data[14]=0:38c54000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:38c45000 set TERM ph data[15]=0:38c45000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b590b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e9c0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ea40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904ea40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:38c76000 ph data[0]=0:38c76000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:388b7000 ph data[1]=0:388b7000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:388e0000 ph data[2]=0:388e0000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:38d11000 ph data[3]=0:38d11000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38c62000 ph data[4]=0:38c62000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:388bb000 ph data[5]=0:388bb000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38c4c000 ph data[6]=0:38c4c000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:38c3d000 ph data[7]=0:38c3d000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:38c6e000 ph data[8]=0:38c6e000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:38d87000 ph data[9]=0:38d87000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:388d8000 ph data[10]=0:388d8000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:38d09000 ph data[11]=0:38d09000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:38c5a000 ph data[12]=0:38c5a000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:38d7b000 ph data[13]=0:38d7b000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38c44000 ph data[14]=0:38c44000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:38c35000 set TERM ph data[15]=0:38c35000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b590b4 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ea40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eac0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904eac0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:38c66000 ph data[0]=0:38c66000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:38d7f000 ph data[1]=0:38d7f000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:38c00000 ph data[2]=0:38c00000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:38ca9000 ph data[3]=0:38ca9000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:38c52000 ph data[4]=0:38c52000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:38d73000 ph data[5]=0:38d73000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:38c3c000 ph data[6]=0:38c3c000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:38c2d000 ph data[7]=0:38c2d000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:38c5e000 ph data[8]=0:38c5e000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:38d77000 ph data[9]=0:38d77000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:38b80000 ph data[10]=0:38b80000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:38ca1000 ph data[11]=0:38ca1000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:38c6a000 ph data[12]=0:38c6a000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:38d6b000 ph data[13]=0:38d6b000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:38c34000 ph data[14]=0:38c34000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:38c7d000 set TERM ph data[15]=0:38c7d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eac0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eb40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904eb40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bf6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:37799000 ph data[0]=0:37799000 (fff) get Phys(data[n=1+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:38d52000 ph data[1]=0:38d52000 (fff) get Phys(data[n=2+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:38d2b000 ph data[2]=0:38d2b000 (fff) get Phys(data[n=3+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:38d54000 ph data[3]=0:38d54000 (fff) get Phys(data[n=4+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:38d45000 ph data[4]=0:38d45000 (fff) get Phys(data[n=5+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:38c7e000 ph data[5]=0:38c7e000 (fff) get Phys(data[n=6+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:388c7000 ph data[6]=0:388c7000 (fff) get Phys(data[n=7+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:38c68000 ph data[7]=0:38c68000 (fff) get Phys(data[n=8+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:38d21000 ph data[8]=0:38d21000 (fff) get Phys(data[n=9+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:38d4a000 ph data[9]=0:38d4a000 (fff) get Phys(data[n=10+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:38d23000 ph data[10]=0:38d23000 (fff) get Phys(data[n=11+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:38d4c000 ph data[11]=0:38d4c000 (fff) get Phys(data[n=12+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:388b5000 ph data[12]=0:388b5000 (fff) get Phys(data[n=13+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:3892e000 ph data[13]=0:3892e000 (fff) get Phys(data[n=14+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:388bf000 ph data[14]=0:388bf000 (fff) get Phys(data[n=15+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:388e8000 set TERM ph data[15]=0:388e8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eb40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ebc0, OrigWordsRequested 0x3900, DevSize 0x39 IdeReadWrite (REQ): Starting sector is 3904ebc0, Number of WORDS 0x3900, DevSize 0x39 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c06000, count 7200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:38af9000 ph data[0]=0:38af9000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:38a62000 ph data[1]=0:38a62000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:388cb000 ph data[2]=0:388cb000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:388b4000 ph data[3]=0:388b4000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38c55000 ph data[4]=0:38c55000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38a16000 ph data[5]=0:38a16000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38947000 ph data[6]=0:38947000 (fff) get Phys(data[n=7+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:38a08000 set TERM ph data[7]=0:38a08000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ebc0, Count 0x39(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x8, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3900, WordsLeft 3900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 7200, full size 7200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2c8f9000 ph data[0]=0:2c8f9000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3bd9a000 set TERM ph data[1]=0:3bd9a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ec00, OrigWordsRequested 0x1400, DevSize 0x14 IdeReadWrite (REQ): Starting sector is 3904ec00, Number of WORDS 0x1400, DevSize 0x14 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c0a000, count 2800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:28659000 ph data[0]=0:28659000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:2c902000 ph data[1]=0:2c902000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:285c3000 set TERM ph data[2]=0:285c3000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ec00, Count 0x14(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x3, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1400, WordsLeft 1400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2800, full size 2800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3ec59000 ph data[0]=0:3ec59000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f8d2000 set TERM ph data[1]=0:3f8d2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ec20, OrigWordsRequested 0x1600, DevSize 0x16 IdeReadWrite (REQ): Starting sector is 3904ec20, Number of WORDS 0x1600, DevSize 0x16 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c0a000, count 2c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:3b369000 ph data[0]=0:3b369000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:3f94a000 ph data[1]=0:3f94a000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:3f8db000 set TERM ph data[2]=0:3f8db000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ec20, Count 0x16(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x3, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1600, WordsLeft 1600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2c00, full size 2c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:389a9000 ph data[0]=0:389a9000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:389f2000 set TERM ph data[1]=0:389f2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request (win32ss/user/ntuser/msgqueue.c:1271) err: MsqSendMessage timed out 2 Status 102 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960cc60, OrigWordsRequested 0x8600, DevSize 0x86 IdeReadWrite (REQ): Starting sector is 3960cc60, Number of WORDS 0x8600, DevSize 0x86 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bfc000, count 10c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:38bb7000 ph data[0]=0:38bb7000 (fff) get Phys(data[n=1+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:3bd98000 ph data[1]=0:3bd98000 (fff) get Phys(data[n=2+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:3bdb1000 ph data[2]=0:3bdb1000 (fff) get Phys(data[n=3+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:38c82000 ph data[3]=0:38c82000 (fff) get Phys(data[n=4+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:38ab3000 ph data[4]=0:38ab3000 (fff) get Phys(data[n=5+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:3b384000 ph data[5]=0:3b384000 (fff) get Phys(data[n=6+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:38935000 ph data[6]=0:38935000 (fff) get Phys(data[n=7+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:3f8ae000 ph data[7]=0:3f8ae000 (fff) get Phys(data[n=8+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:38977000 ph data[8]=0:38977000 (fff) get Phys(data[n=9+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:3f788000 ph data[9]=0:3f788000 (fff) get Phys(data[n=10+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:3bda9000 ph data[10]=0:3bda9000 (fff) get Phys(data[n=11+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:38c8a000 ph data[11]=0:38c8a000 (fff) get Phys(data[n=12+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:38993000 ph data[12]=0:38993000 (fff) get Phys(data[n=13+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:3f88c000 ph data[13]=0:3f88c000 (fff) get Phys(data[n=14+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:3f92d000 ph data[14]=0:3f92d000 (fff) get Phys(data[n=15+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:3f8a6000 ph data[15]=0:3f8a6000 (fff) get Phys(data[n=16+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:389e7000 set TERM ph data[16]=0:389e7000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cc60, Count 0x86(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x11, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ec40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904ec40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bae000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:2e58f000 ph data[0]=0:2e58f000 (fff) get Phys(data[n=1+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:38ce8000 ph data[1]=0:38ce8000 (fff) get Phys(data[n=2+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:38d59000 ph data[2]=0:38d59000 (fff) get Phys(data[n=3+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:38ada000 ph data[3]=0:38ada000 (fff) get Phys(data[n=4+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:38cdb000 ph data[4]=0:38cdb000 (fff) get Phys(data[n=5+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:38b84000 ph data[5]=0:38b84000 (fff) get Phys(data[n=6+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:3898d000 ph data[6]=0:3898d000 (fff) get Phys(data[n=7+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:38906000 ph data[7]=0:38906000 (fff) get Phys(data[n=8+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:38c77000 ph data[8]=0:38c77000 (fff) get Phys(data[n=9+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:3f888000 ph data[9]=0:3f888000 (fff) get Phys(data[n=10+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:38b41000 ph data[10]=0:38b41000 (fff) get Phys(data[n=11+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:38bca000 ph data[11]=0:38bca000 (fff) get Phys(data[n=12+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:38c3b000 ph data[12]=0:38c3b000 (fff) get Phys(data[n=13+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:3f904000 ph data[13]=0:3f904000 (fff) get Phys(data[n=14+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:3f6f5000 ph data[14]=0:3f6f5000 (fff) get Phys(data[n=15+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:3f6c6000 set TERM ph data[15]=0:3f6c6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8600, WordsLeft 8600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10c00, full size 10c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59064 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ec40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ecc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904ecc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6bbe000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:38c7f000 ph data[0]=0:38c7f000 (fff) get Phys(data[n=1+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:3f880000 ph data[1]=0:3f880000 (fff) get Phys(data[n=2+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:38b49000 ph data[2]=0:38b49000 (fff) get Phys(data[n=3+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:38ce2000 ph data[3]=0:38ce2000 (fff) get Phys(data[n=4+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:38c43000 ph data[4]=0:38c43000 (fff) get Phys(data[n=5+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:3f8fc000 ph data[5]=0:3f8fc000 (fff) get Phys(data[n=6+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:3f6ed000 ph data[6]=0:3f6ed000 (fff) get Phys(data[n=7+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:3f88e000 ph data[7]=0:3f88e000 (fff) get Phys(data[n=8+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:3f8d7000 ph data[8]=0:3f8d7000 (fff) get Phys(data[n=9+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:3f748000 ph data[9]=0:3f748000 (fff) get Phys(data[n=10+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:388b9000 ph data[10]=0:388b9000 (fff) get Phys(data[n=11+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:389da000 ph data[11]=0:389da000 (fff) get Phys(data[n=12+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:3ec53000 ph data[12]=0:3ec53000 (fff) get Phys(data[n=13+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:3f8f4000 ph data[13]=0:3f8f4000 (fff) get Phys(data[n=14+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:3f915000 ph data[14]=0:3f915000 (fff) get Phys(data[n=15+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:3f886000 set TERM ph data[15]=0:3f886000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b590a8 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ecc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ed40, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 3904ed40, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bce000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:3f8cf000 ph data[0]=0:3f8cf000 (fff) get Phys(data[n=1+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:3f790000 ph data[1]=0:3f790000 (fff) get Phys(data[n=2+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:3b2f1000 ph data[2]=0:3b2f1000 (fff) get Phys(data[n=3+1000]=f6bd1000) AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:389d2000 set TERM ph data[3]=0:389d2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b590b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ed40, Count 0x20(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38c2f000 ph data[0]=0:38c2f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2e570000 set TERM ph data[1]=0:2e570000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ed60, OrigWordsRequested 0x8600, DevSize 0x86 IdeReadWrite (REQ): Starting sector is 3904ed60, Number of WORDS 0x8600, DevSize 0x86 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bfc000, count 10c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:3f86c000 ph data[0]=0:3f86c000 (fff) get Phys(data[n=1+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:3f88d000 ph data[1]=0:3f88d000 (fff) get Phys(data[n=2+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:38b4e000 ph data[2]=0:38b4e000 (fff) get Phys(data[n=3+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:3f92f000 ph data[3]=0:3f92f000 (fff) get Phys(data[n=4+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:38b90000 ph data[4]=0:38b90000 (fff) get Phys(data[n=5+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:3f6f9000 ph data[5]=0:3f6f9000 (fff) get Phys(data[n=6+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:2e522000 ph data[6]=0:2e522000 (fff) get Phys(data[n=7+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:38b53000 ph data[7]=0:38b53000 (fff) get Phys(data[n=8+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:3f864000 ph data[8]=0:3f864000 (fff) get Phys(data[n=9+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:388dd000 ph data[9]=0:388dd000 (fff) get Phys(data[n=10+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:38b16000 ph data[10]=0:38b16000 (fff) get Phys(data[n=11+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:3f927000 ph data[11]=0:3f927000 (fff) get Phys(data[n=12+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:38b48000 ph data[12]=0:38b48000 (fff) get Phys(data[n=13+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:3f6f1000 ph data[13]=0:3f6f1000 (fff) get Phys(data[n=14+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:2e51a000 ph data[14]=0:2e51a000 (fff) get Phys(data[n=15+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38c7b000 ph data[15]=0:38c7b000 (fff) get Phys(data[n=16+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38bd4000 set TERM ph data[16]=0:38bd4000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ed60, Count 0x86(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x11, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8600, WordsLeft 8600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10c00, full size 10c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab70 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcea70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcea70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:38d3c000 ph data[0]=0:38d3c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:38d2d000 ph data[1]=0:38d2d000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:38d6e000 ph data[2]=0:38d6e000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:38d27000 ph data[3]=0:38d27000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:38d58000 ph data[4]=0:38d58000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:37829000 ph data[5]=0:37829000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:38d42000 ph data[6]=0:38d42000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:377b3000 ph data[7]=0:377b3000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:38d44000 ph data[8]=0:38d44000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:38d35000 ph data[9]=0:38d35000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:38d76000 ph data[10]=0:38d76000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:37797000 ph data[11]=0:37797000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:38d60000 ph data[12]=0:38d60000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:36a81000 ph data[13]=0:36a81000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:388d2000 ph data[14]=0:388d2000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:377bb000 set TERM ph data[15]=0:377bb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcea70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab70 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fceaf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fceaf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:388d4000 ph data[0]=0:388d4000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:38d3d000 ph data[1]=0:38d3d000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:388be000 ph data[2]=0:388be000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:377af000 ph data[3]=0:377af000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:38d68000 ph data[4]=0:38d68000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:36a89000 ph data[5]=0:36a89000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:38c92000 ph data[6]=0:38c92000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:377c3000 ph data[7]=0:377c3000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:38c94000 ph data[8]=0:38c94000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:388d5000 ph data[9]=0:388d5000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:388c6000 ph data[10]=0:388c6000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:377b7000 ph data[11]=0:377b7000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:38d70000 ph data[12]=0:38d70000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:36a91000 ph data[13]=0:36a91000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:38c9a000 ph data[14]=0:38c9a000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:377d3000 set TERM ph data[15]=0:377d3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab70 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fceb70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fceb70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:38ca4000 ph data[0]=0:38ca4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:38c8d000 ph data[1]=0:38c8d000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:388ce000 ph data[2]=0:388ce000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:377bf000 ph data[3]=0:377bf000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38d78000 ph data[4]=0:38d78000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:36a99000 ph data[5]=0:36a99000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38ca2000 ph data[6]=0:38ca2000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:377eb000 ph data[7]=0:377eb000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:38cac000 ph data[8]=0:38cac000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:38c95000 ph data[9]=0:38c95000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:38d1e000 ph data[10]=0:38d1e000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:377cf000 ph data[11]=0:377cf000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:38d80000 ph data[12]=0:38d80000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:36aa1000 ph data[13]=0:36aa1000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38caa000 ph data[14]=0:38caa000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:377f3000 set TERM ph data[15]=0:377f3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcebf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcebf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:38cb4000 ph data[0]=0:38cb4000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:38c9d000 ph data[1]=0:38c9d000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:38d2e000 ph data[2]=0:38d2e000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:377d7000 ph data[3]=0:377d7000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:38d88000 ph data[4]=0:38d88000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:36aa9000 ph data[5]=0:36aa9000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:38cb2000 ph data[6]=0:38cb2000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:377fb000 ph data[7]=0:377fb000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:38d14000 ph data[8]=0:38d14000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:38ca5000 ph data[9]=0:38ca5000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:38d36000 ph data[10]=0:38d36000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:377df000 ph data[11]=0:377df000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:388b8000 ph data[12]=0:388b8000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:36ab1000 ph data[13]=0:36ab1000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:38d12000 ph data[14]=0:38d12000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:37803000 set TERM ph data[15]=0:37803000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:377f4000 ph data[0]=0:377f4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:37795000 set TERM ph data[1]=0:37795000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fceaf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fceb70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcebf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab70 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcea70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcea70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:377ec000 ph data[0]=0:377ec000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:38d15000 ph data[1]=0:38d15000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:38c86000 ph data[2]=0:38c86000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:377ff000 ph data[3]=0:377ff000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:388c8000 ph data[4]=0:388c8000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:36099000 ph data[5]=0:36099000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:388a2000 ph data[6]=0:388a2000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:3f94b000 ph data[7]=0:3f94b000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:38d1c000 ph data[8]=0:38d1c000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2a25d000 ph data[9]=0:2a25d000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2a2c6000 ph data[10]=0:2a2c6000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:377e7000 ph data[11]=0:377e7000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:388c0000 ph data[12]=0:388c0000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:36ab9000 ph data[13]=0:36ab9000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:38c3a000 ph data[14]=0:38c3a000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3f6e3000 set TERM ph data[15]=0:3f6e3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcea70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fceaf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fceaf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:388dc000 ph data[0]=0:388dc000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3f6c5000 ph data[1]=0:3f6c5000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3f706000 ph data[2]=0:3f706000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:38c87000 ph data[3]=0:38c87000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f768000 ph data[4]=0:3f768000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3f701000 ph data[5]=0:3f701000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2e532000 ph data[6]=0:2e532000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:3f8f3000 ph data[7]=0:3f8f3000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3f874000 ph data[8]=0:3f874000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3f6cd000 ph data[9]=0:3f6cd000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3f70e000 ph data[10]=0:3f70e000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3f71f000 ph data[11]=0:3f71f000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3f770000 ph data[12]=0:3f770000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3f8d1000 ph data[13]=0:3f8d1000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:38c32000 ph data[14]=0:38c32000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3f903000 set TERM ph data[15]=0:3f903000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fceaf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab70 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fceb70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fceb70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3f6e4000 ph data[0]=0:3f6e4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3f6d5000 ph data[1]=0:3f6d5000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3f896000 ph data[2]=0:3f896000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:38c3f000 ph data[3]=0:38c3f000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3f778000 ph data[4]=0:3f778000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f8d9000 ph data[5]=0:3f8d9000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2e53a000 ph data[6]=0:2e53a000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3f90b000 ph data[7]=0:3f90b000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:38c64000 ph data[8]=0:38c64000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3f91d000 ph data[9]=0:3f91d000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:3f77e000 ph data[10]=0:3f77e000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f6e7000 ph data[11]=0:3f6e7000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f780000 ph data[12]=0:3f780000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:2e541000 ph data[13]=0:2e541000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3f712000 ph data[14]=0:3f712000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:28413000 set TERM ph data[15]=0:28413000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fceb70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcebf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcebf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3f884000 ph data[0]=0:3f884000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:286fd000 ph data[1]=0:286fd000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:3f89e000 ph data[2]=0:3f89e000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:287b7000 ph data[3]=0:287b7000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2e550000 ph data[4]=0:2e550000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:388c9000 ph data[5]=0:388c9000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3f71a000 ph data[6]=0:3f71a000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:38c5b000 ph data[7]=0:38c5b000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2afcc000 ph data[8]=0:2afcc000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:286f5000 ph data[9]=0:286f5000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2e57e000 ph data[10]=0:2e57e000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:2afbf000 ph data[11]=0:2afbf000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2e558000 ph data[12]=0:2e558000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2c8d9000 ph data[13]=0:2c8d9000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3f722000 ph data[14]=0:3f722000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:2872b000 set TERM ph data[15]=0:2872b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcebf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9af9c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcea70, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fcea70, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:377b3000 ph data[0]=0:377b3000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38d3c000 set TERM ph data[1]=0:38d3c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcea70, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904edf0, OrigWordsRequested 0x600, DevSize 0x6 IdeReadWrite (REQ): Starting sector is 3904edf0, Number of WORDS 0x600, DevSize 0x6 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b82000, count c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2afc4000 set TERM ph data[0]=0:2afc4000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59104 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904edf0, Count 0x6(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9af90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcec70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcec70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:38b53000 ph data[0]=0:38b53000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:38bd4000 ph data[1]=0:38bd4000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2a255000 ph data[2]=0:2a255000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:38b4e000 ph data[3]=0:38b4e000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f927000 ph data[4]=0:3f927000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:38b90000 ph data[5]=0:38b90000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3f6f9000 ph data[6]=0:3f6f9000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:2e522000 ph data[7]=0:2e522000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:377ab000 ph data[8]=0:377ab000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3f864000 ph data[9]=0:3f864000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2a24d000 ph data[10]=0:2a24d000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:3f786000 ph data[11]=0:3f786000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f92f000 ph data[12]=0:3f92f000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:3f760000 ph data[13]=0:3f760000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3f8f9000 ph data[14]=0:3f8f9000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:38b8a000 set TERM ph data[15]=0:38b8a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9af90 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcecf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcecf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:2a253000 ph data[0]=0:2a253000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3f86c000 ph data[1]=0:3f86c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:38c6d000 ph data[2]=0:38c6d000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2c916000 ph data[3]=0:2c916000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f937000 ph data[4]=0:3f937000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:2e578000 ph data[5]=0:2e578000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:38d79000 ph data[6]=0:38d79000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:38c42000 ph data[7]=0:38c42000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:38c53000 ph data[8]=0:38c53000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:38d34000 ph data[9]=0:38d34000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:389c5000 ph data[10]=0:389c5000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:286e6000 ph data[11]=0:286e6000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3f6d7000 ph data[12]=0:3f6d7000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2afa8000 ph data[13]=0:2afa8000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3f921000 ph data[14]=0:3f921000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:2e65a000 set TERM ph data[15]=0:2e65a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9af90 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fced70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fced70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:38c4b000 ph data[0]=0:38c4b000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:38bfc000 ph data[1]=0:38bfc000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3f6e5000 ph data[2]=0:3f6e5000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:38b5e000 ph data[3]=0:38b5e000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38b97000 ph data[4]=0:38b97000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:38ba0000 ph data[5]=0:38ba0000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38cf1000 ph data[6]=0:38cf1000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:38c72000 ph data[7]=0:38c72000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:38c33000 ph data[8]=0:38c33000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3f71c000 ph data[9]=0:3f71c000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:38c85000 ph data[10]=0:38c85000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:38b56000 ph data[11]=0:38b56000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f877000 ph data[12]=0:3f877000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:38b98000 ph data[13]=0:38b98000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38cf9000 ph data[14]=0:38cf9000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3f87a000 set TERM ph data[15]=0:3f87a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9af90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcedf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcedf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3f6cb000 ph data[0]=0:3f6cb000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:38abc000 ph data[1]=0:38abc000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:38b15000 ph data[2]=0:38b15000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3f8be000 ph data[3]=0:3f8be000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:38c27000 ph data[4]=0:38c27000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3f8a0000 ph data[5]=0:3f8a0000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3f6e9000 ph data[6]=0:3f6e9000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:3f882000 ph data[7]=0:3f882000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2a24b000 ph data[8]=0:2a24b000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:38b8c000 ph data[9]=0:38b8c000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:3f8cd000 ph data[10]=0:3f8cd000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f6d6000 ph data[11]=0:3f6d6000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3f917000 ph data[12]=0:3f917000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:38b88000 ph data[13]=0:38b88000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:388c1000 ph data[14]=0:388c1000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:38c7a000 set TERM ph data[15]=0:38c7a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 600, WordsLeft 600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered c00, full size c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcec70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b593f8 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcecf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59644 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fced70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:377b3000 ph data[0]=0:377b3000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38d3c000 set TERM ph data[1]=0:38d3c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcedf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9ab04 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:36aa3000 ph data[0]=0:36aa3000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:37824000 set TERM ph data[1]=0:37824000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ee00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904ee00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bfc000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:38c7b000 ph data[0]=0:38c7b000 (fff) get Phys(data[n=1+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:38b64000 ph data[1]=0:38b64000 (fff) get Phys(data[n=2+1000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:388dd000 ph data[2]=0:388dd000 (fff) get Phys(data[n=3+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:3f6fe000 ph data[3]=0:3f6fe000 (fff) get Phys(data[n=4+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:3f6c7000 ph data[4]=0:3f6c7000 (fff) get Phys(data[n=5+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:3f830000 ph data[5]=0:3f830000 (fff) get Phys(data[n=6+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:38961000 ph data[6]=0:38961000 (fff) get Phys(data[n=7+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:2e512000 ph data[7]=0:2e512000 (fff) get Phys(data[n=8+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:3f92b000 ph data[8]=0:3f92b000 (fff) get Phys(data[n=9+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:3f8b4000 ph data[9]=0:3f8b4000 (fff) get Phys(data[n=10+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:38c65000 ph data[10]=0:38c65000 (fff) get Phys(data[n=11+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:3898e000 ph data[11]=0:3898e000 (fff) get Phys(data[n=12+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:3f88f000 ph data[12]=0:3f88f000 (fff) get Phys(data[n=13+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:3f828000 ph data[13]=0:3f828000 (fff) get Phys(data[n=14+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:2afb9000 ph data[14]=0:2afb9000 (fff) get Phys(data[n=15+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:388da000 set TERM ph data[15]=0:388da000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ee80, OrigWordsRequested 0x900, DevSize 0x9 IdeReadWrite (REQ): Starting sector is 3904ee80, Number of WORDS 0x900, DevSize 0x9 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c0c000, count 1200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:3f6db000 ph data[0]=0:3f6db000 (fff) get Phys(data[n=1+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:3f8ac000 set TERM ph data[1]=0:3f8ac000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ee00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9accc ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ee80, Count 0x9(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 900, WordsLeft 900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1200, full size 1200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9a690 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3d843000 ph data[0]=0:3d843000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:3cac4000 set TERM ph data[1]=0:3cac4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9abc0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3f88b000 set TERM ph data[0]=0:3f88b000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3f703000 ph data[0]=0:3f703000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38ce4000 set TERM ph data[1]=0:38ce4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request (win32ss/user/ntuser/msgqueue.c:1271) err: MsqSendMessage timed out 2 Status 102 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e26b60 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d70 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390529b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390529b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3f902000 ph data[0]=0:3f902000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:38b7b000 ph data[1]=0:38b7b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:38c7c000 ph data[2]=0:38c7c000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:3c4ed000 ph data[3]=0:3c4ed000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:38bc6000 ph data[4]=0:38bc6000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2c987000 ph data[5]=0:2c987000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3f838000 ph data[6]=0:3f838000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:38c31000 ph data[7]=0:38c31000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:3f90a000 ph data[8]=0:3f90a000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:38b83000 ph data[9]=0:38b83000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3ecac000 ph data[10]=0:3ecac000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:38ba5000 ph data[11]=0:38ba5000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:38bce000 ph data[12]=0:38bce000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2c97f000 ph data[13]=0:2c97f000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:389e0000 ph data[14]=0:389e0000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:2c901000 set TERM ph data[15]=0:2c901000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390529b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d70 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052a30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052a30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3bd9a000 ph data[0]=0:3bd9a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:38b8b000 ph data[1]=0:38b8b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:38904000 ph data[2]=0:38904000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:38bad000 ph data[3]=0:38bad000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f716000 ph data[4]=0:3f716000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:2c977000 ph data[5]=0:2c977000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:38af8000 ph data[6]=0:38af8000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:2c8f9000 ph data[7]=0:2c8f9000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3f8f2000 ph data[8]=0:3f8f2000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3f6f3000 ph data[9]=0:3f6f3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:38b94000 ph data[10]=0:38b94000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:38bb5000 ph data[11]=0:38bb5000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3f71e000 ph data[12]=0:3f71e000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3f6ef000 ph data[13]=0:3f6ef000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:38b00000 ph data[14]=0:38b00000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3d821000 set TERM ph data[15]=0:3d821000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d70 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052ab0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052ab0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3bdba000 ph data[0]=0:3bdba000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3f6fb000 ph data[1]=0:3f6fb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:2c8e4000 ph data[2]=0:2c8e4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:38b4d000 ph data[3]=0:38b4d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38b7e000 ph data[4]=0:38b7e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f6f7000 ph data[5]=0:3f6f7000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38b08000 ph data[6]=0:38b08000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:38d29000 ph data[7]=0:38d29000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3bdc2000 ph data[8]=0:3bdc2000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:38c63000 ph data[9]=0:38c63000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:3f924000 ph data[10]=0:3f924000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f87d000 ph data[11]=0:3f87d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f776000 ph data[12]=0:3f776000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:38c47000 ph data[13]=0:38c47000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3f8c0000 ph data[14]=0:3f8c0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:38d31000 set TERM ph data[15]=0:38d31000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052b30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052b30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3b2f2000 ph data[0]=0:3b2f2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:388b3000 ph data[1]=0:388b3000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:3f92c000 ph data[2]=0:3f92c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3f875000 ph data[3]=0:3f875000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2c8c6000 ph data[4]=0:2c8c6000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:38c4f000 ph data[5]=0:38c4f000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3f8c8000 ph data[6]=0:3f8c8000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:2c8e9000 ph data[7]=0:2c8e9000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:38b6a000 ph data[8]=0:38b6a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2b753000 ph data[9]=0:2b753000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:38c6c000 ph data[10]=0:38c6c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:2e5b5000 ph data[11]=0:2e5b5000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2e666000 ph data[12]=0:2e666000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:286cf000 ph data[13]=0:286cf000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:38b50000 ph data[14]=0:38b50000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:2c8e1000 set TERM ph data[15]=0:2c8e1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9b070 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052a30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9b08c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052ab0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9af5c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052b30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9a920 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390527b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390527b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6aba000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6aba000) AtapiVirtToPhysAddr_: f6aba000 -> 00000000:28694000 ph data[0]=0:28694000 (fff) get Phys(data[n=1+1000]=f6abb000) AtapiVirtToPhysAddr_: f6abb000 -> 00000000:2c96d000 ph data[1]=0:2c96d000 (fff) get Phys(data[n=2+1000]=f6abc000) AtapiVirtToPhysAddr_: f6abc000 -> 00000000:2e65e000 ph data[2]=0:2e65e000 (fff) get Phys(data[n=3+1000]=f6abd000) AtapiVirtToPhysAddr_: f6abd000 -> 00000000:388e7000 ph data[3]=0:388e7000 (fff) get Phys(data[n=4+1000]=f6abe000) AtapiVirtToPhysAddr_: f6abe000 -> 00000000:285a8000 ph data[4]=0:285a8000 (fff) get Phys(data[n=5+1000]=f6abf000) AtapiVirtToPhysAddr_: f6abf000 -> 00000000:286d9000 ph data[5]=0:286d9000 (fff) get Phys(data[n=6+1000]=f6ac0000) AtapiVirtToPhysAddr_: f6ac0000 -> 00000000:2c90a000 ph data[6]=0:2c90a000 (fff) get Phys(data[n=7+1000]=f6ac1000) AtapiVirtToPhysAddr_: f6ac1000 -> 00000000:28463000 ph data[7]=0:28463000 (fff) get Phys(data[n=8+1000]=f6ac2000) AtapiVirtToPhysAddr_: f6ac2000 -> 00000000:285ac000 ph data[8]=0:285ac000 (fff) get Phys(data[n=9+1000]=f6ac3000) AtapiVirtToPhysAddr_: f6ac3000 -> 00000000:2c965000 ph data[9]=0:2c965000 (fff) get Phys(data[n=10+1000]=f6ac4000) AtapiVirtToPhysAddr_: f6ac4000 -> 00000000:285a6000 ph data[10]=0:285a6000 (fff) get Phys(data[n=11+1000]=f6ac5000) AtapiVirtToPhysAddr_: f6ac5000 -> 00000000:38c67000 ph data[11]=0:38c67000 (fff) get Phys(data[n=12+1000]=f6ac6000) AtapiVirtToPhysAddr_: f6ac6000 -> 00000000:285b0000 ph data[12]=0:285b0000 (fff) get Phys(data[n=13+1000]=f6ac7000) AtapiVirtToPhysAddr_: f6ac7000 -> 00000000:286e1000 ph data[13]=0:286e1000 (fff) get Phys(data[n=14+1000]=f6ac8000) AtapiVirtToPhysAddr_: f6ac8000 -> 00000000:2c902000 ph data[14]=0:2c902000 (fff) get Phys(data[n=15+1000]=f6ac9000) AtapiVirtToPhysAddr_: f6ac9000 -> 00000000:285c3000 set TERM ph data[15]=0:285c3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390527b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9a920 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052830, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052830, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6aca000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6aca000) AtapiVirtToPhysAddr_: f6aca000 -> 00000000:285dc000 ph data[0]=0:285dc000 (fff) get Phys(data[n=1+1000]=f6acb000) AtapiVirtToPhysAddr_: f6acb000 -> 00000000:2b755000 ph data[1]=0:2b755000 (fff) get Phys(data[n=2+1000]=f6acc000) AtapiVirtToPhysAddr_: f6acc000 -> 00000000:2c8ce000 ph data[2]=0:2c8ce000 (fff) get Phys(data[n=3+1000]=f6acd000) AtapiVirtToPhysAddr_: f6acd000 -> 00000000:286c7000 ph data[3]=0:286c7000 (fff) get Phys(data[n=4+1000]=f6ace000) AtapiVirtToPhysAddr_: f6ace000 -> 00000000:286b0000 ph data[4]=0:286b0000 (fff) get Phys(data[n=5+1000]=f6acf000) AtapiVirtToPhysAddr_: f6acf000 -> 00000000:28659000 ph data[5]=0:28659000 (fff) get Phys(data[n=6+1000]=f6ad0000) AtapiVirtToPhysAddr_: f6ad0000 -> 00000000:3bd92000 ph data[6]=0:3bd92000 (fff) get Phys(data[n=7+1000]=f6ad1000) AtapiVirtToPhysAddr_: f6ad1000 -> 00000000:2c96b000 ph data[7]=0:2c96b000 (fff) get Phys(data[n=8+1000]=f6ad2000) AtapiVirtToPhysAddr_: f6ad2000 -> 00000000:287bc000 ph data[8]=0:287bc000 (fff) get Phys(data[n=9+1000]=f6ad3000) AtapiVirtToPhysAddr_: f6ad3000 -> 00000000:2b745000 ph data[9]=0:2b745000 (fff) get Phys(data[n=10+1000]=f6ad4000) AtapiVirtToPhysAddr_: f6ad4000 -> 00000000:2ed96000 ph data[10]=0:2ed96000 (fff) get Phys(data[n=11+1000]=f6ad5000) AtapiVirtToPhysAddr_: f6ad5000 -> 00000000:38a4f000 ph data[11]=0:38a4f000 (fff) get Phys(data[n=12+1000]=f6ad6000) AtapiVirtToPhysAddr_: f6ad6000 -> 00000000:286b8000 ph data[12]=0:286b8000 (fff) get Phys(data[n=13+1000]=f6ad7000) AtapiVirtToPhysAddr_: f6ad7000 -> 00000000:2c8f1000 ph data[13]=0:2c8f1000 (fff) get Phys(data[n=14+1000]=f6ad8000) AtapiVirtToPhysAddr_: f6ad8000 -> 00000000:38a6a000 ph data[14]=0:38a6a000 (fff) get Phys(data[n=15+1000]=f6ad9000) AtapiVirtToPhysAddr_: f6ad9000 -> 00000000:2c963000 set TERM ph data[15]=0:2c963000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9a920 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390528b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390528b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6ada000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6ada000) AtapiVirtToPhysAddr_: f6ada000 -> 00000000:2e55c000 ph data[0]=0:2e55c000 (fff) get Phys(data[n=1+1000]=f6adb000) AtapiVirtToPhysAddr_: f6adb000 -> 00000000:2b73d000 ph data[1]=0:2b73d000 (fff) get Phys(data[n=2+1000]=f6adc000) AtapiVirtToPhysAddr_: f6adc000 -> 00000000:2e566000 ph data[2]=0:2e566000 (fff) get Phys(data[n=3+1000]=f6add000) AtapiVirtToPhysAddr_: f6add000 -> 00000000:2e62f000 ph data[3]=0:2e62f000 (fff) get Phys(data[n=4+1000]=f6ade000) AtapiVirtToPhysAddr_: f6ade000 -> 00000000:2c8d8000 ph data[4]=0:2c8d8000 (fff) get Phys(data[n=5+1000]=f6adf000) AtapiVirtToPhysAddr_: f6adf000 -> 00000000:38b01000 ph data[5]=0:38b01000 (fff) get Phys(data[n=6+1000]=f6ae0000) AtapiVirtToPhysAddr_: f6ae0000 -> 00000000:3f8ca000 ph data[6]=0:3f8ca000 (fff) get Phys(data[n=7+1000]=f6ae1000) AtapiVirtToPhysAddr_: f6ae1000 -> 00000000:38a5b000 ph data[7]=0:38a5b000 (fff) get Phys(data[n=8+1000]=f6ae2000) AtapiVirtToPhysAddr_: f6ae2000 -> 00000000:2c99c000 ph data[8]=0:2c99c000 (fff) get Phys(data[n=9+1000]=f6ae3000) AtapiVirtToPhysAddr_: f6ae3000 -> 00000000:389d5000 ph data[9]=0:389d5000 (fff) get Phys(data[n=10+1000]=f6ae4000) AtapiVirtToPhysAddr_: f6ae4000 -> 00000000:2e55e000 ph data[10]=0:2e55e000 (fff) get Phys(data[n=11+1000]=f6ae5000) AtapiVirtToPhysAddr_: f6ae5000 -> 00000000:2e617000 ph data[11]=0:2e617000 (fff) get Phys(data[n=12+1000]=f6ae6000) AtapiVirtToPhysAddr_: f6ae6000 -> 00000000:38a10000 ph data[12]=0:38a10000 (fff) get Phys(data[n=13+1000]=f6ae7000) AtapiVirtToPhysAddr_: f6ae7000 -> 00000000:2e531000 ph data[13]=0:2e531000 (fff) get Phys(data[n=14+1000]=f6ae8000) AtapiVirtToPhysAddr_: f6ae8000 -> 00000000:3bda2000 ph data[14]=0:3bda2000 (fff) get Phys(data[n=15+1000]=f6ae9000) AtapiVirtToPhysAddr_: f6ae9000 -> 00000000:2e64b000 set TERM ph data[15]=0:2e64b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9a920 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052930, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052930, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6aea000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6aea000) AtapiVirtToPhysAddr_: f6aea000 -> 00000000:2868c000 ph data[0]=0:2868c000 (fff) get Phys(data[n=1+1000]=f6aeb000) AtapiVirtToPhysAddr_: f6aeb000 -> 00000000:2e585000 ph data[1]=0:2e585000 (fff) get Phys(data[n=2+1000]=f6aec000) AtapiVirtToPhysAddr_: f6aec000 -> 00000000:38c26000 ph data[2]=0:38c26000 (fff) get Phys(data[n=3+1000]=f6aed000) AtapiVirtToPhysAddr_: f6aed000 -> 00000000:38d6f000 ph data[3]=0:38d6f000 (fff) get Phys(data[n=4+1000]=f6aee000) AtapiVirtToPhysAddr_: f6aee000 -> 00000000:2e608000 ph data[4]=0:2e608000 (fff) get Phys(data[n=5+1000]=f6aef000) AtapiVirtToPhysAddr_: f6aef000 -> 00000000:38c99000 ph data[5]=0:38c99000 (fff) get Phys(data[n=6+1000]=f6af0000) AtapiVirtToPhysAddr_: f6af0000 -> 00000000:388c2000 ph data[6]=0:388c2000 (fff) get Phys(data[n=7+1000]=f6af1000) AtapiVirtToPhysAddr_: f6af1000 -> 00000000:2e643000 ph data[7]=0:2e643000 (fff) get Phys(data[n=8+1000]=f6af2000) AtapiVirtToPhysAddr_: f6af2000 -> 00000000:38aec000 ph data[8]=0:38aec000 (fff) get Phys(data[n=9+1000]=f6af3000) AtapiVirtToPhysAddr_: f6af3000 -> 00000000:38d75000 ph data[9]=0:38d75000 (fff) get Phys(data[n=10+1000]=f6af4000) AtapiVirtToPhysAddr_: f6af4000 -> 00000000:38c2e000 ph data[10]=0:38c2e000 (fff) get Phys(data[n=11+1000]=f6af5000) AtapiVirtToPhysAddr_: f6af5000 -> 00000000:388cf000 ph data[11]=0:388cf000 (fff) get Phys(data[n=12+1000]=f6af6000) AtapiVirtToPhysAddr_: f6af6000 -> 00000000:38b68000 ph data[12]=0:38b68000 (fff) get Phys(data[n=13+1000]=f6af7000) AtapiVirtToPhysAddr_: f6af7000 -> 00000000:37801000 ph data[13]=0:37801000 (fff) get Phys(data[n=14+1000]=f6af8000) AtapiVirtToPhysAddr_: f6af8000 -> 00000000:388ca000 ph data[14]=0:388ca000 (fff) get Phys(data[n=15+1000]=f6af9000) AtapiVirtToPhysAddr_: f6af9000 -> 00000000:38c9b000 set TERM ph data[15]=0:38c9b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960ce60, OrigWordsRequested 0xb00, DevSize 0xb IdeReadWrite (REQ): Starting sector is 3960ce60, Number of WORDS 0xb00, DevSize 0xb AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b82000, count 1600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:28424000 ph data[0]=0:28424000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:388bd000 set TERM ph data[1]=0:388bd000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ee90, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 3904ee90, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2e644000 ph data[0]=0:2e644000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28595000 set TERM ph data[1]=0:28595000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f94 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ee90, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68f08 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052830, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68bac ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390528b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b695fc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052930, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b696cc ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ce60, Count 0xb(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered b00, WordsLeft b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1600, full size 1600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:360ab000 ph data[0]=0:360ab000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:36aac000 set TERM ph data[1]=0:36aac000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eea0, OrigWordsRequested 0x3300, DevSize 0x33 IdeReadWrite (REQ): Starting sector is 3904eea0, Number of WORDS 0x3300, DevSize 0x33 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c06000, count 6600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:3f914000 ph data[0]=0:3f914000 (fff) get Phys(data[n=1+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:38d2d000 ph data[1]=0:38d2d000 (fff) get Phys(data[n=2+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:3f866000 ph data[2]=0:3f866000 (fff) get Phys(data[n=3+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:38a2f000 ph data[3]=0:38a2f000 (fff) get Phys(data[n=4+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:3b2f0000 ph data[4]=0:3b2f0000 (fff) get Phys(data[n=5+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38b91000 ph data[5]=0:38b91000 (fff) get Phys(data[n=6+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38a42000 set TERM ph data[6]=0:38a42000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eea0, Count 0x33(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x7, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3300, WordsLeft 3300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 6600, full size 6600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:37824000 ph data[0]=0:37824000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:36ab5000 set TERM ph data[1]=0:36ab5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eee0, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 3904eee0, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38c94000 set TERM ph data[0]=0:38c94000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eee0, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:36aac000 ph data[0]=0:36aac000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:37815000 set TERM ph data[1]=0:37815000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904eef0, OrigWordsRequested 0x700, DevSize 0x7 IdeReadWrite (REQ): Starting sector is 3904eef0, Number of WORDS 0x700, DevSize 0x7 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3609c000 set TERM ph data[0]=0:3609c000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904eef0, Count 0x7(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 700, WordsLeft 700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e00, full size e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:360a4000 ph data[0]=0:360a4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:37825000 set TERM ph data[1]=0:37825000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef00, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 3904ef00, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:360bc000 ph data[0]=0:360bc000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:36a8d000 set TERM ph data[1]=0:36a8d000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef00, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:388d4000 ph data[0]=0:388d4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38c8d000 set TERM ph data[1]=0:38c8d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef10, OrigWordsRequested 0xf00, DevSize 0xf IdeReadWrite (REQ): Starting sector is 3904ef10, Number of WORDS 0xf00, DevSize 0xf AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 1e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f90c000 ph data[0]=0:3f90c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38d35000 set TERM ph data[1]=0:38d35000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef10, Count 0xf(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered f00, WordsLeft f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1e00, full size 1e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f93c000 ph data[0]=0:3f93c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f8fd000 set TERM ph data[1]=0:3f8fd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef20, OrigWordsRequested 0x700, DevSize 0x7 IdeReadWrite (REQ): Starting sector is 3904ef20, Number of WORDS 0x700, DevSize 0x7 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:35914000 set TERM ph data[0]=0:35914000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef20, Count 0x7(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 700, WordsLeft 700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e00, full size e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:360cc000 ph data[0]=0:360cc000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:36a9d000 set TERM ph data[1]=0:36a9d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef30, OrigWordsRequested 0x4200, DevSize 0x42 IdeReadWrite (REQ): Starting sector is 3904ef30, Number of WORDS 0x4200, DevSize 0x42 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c04000, count 8400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:3609c000 ph data[0]=0:3609c000 (fff) get Phys(data[n=1+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:3781d000 ph data[1]=0:3781d000 (fff) get Phys(data[n=2+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:3781e000 ph data[1]=0:3781d000 (1fff) get Phys(data[n=2+2000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:36ab7000 ph data[2]=0:36ab7000 (fff) get Phys(data[n=3+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:377a0000 ph data[3]=0:377a0000 (fff) get Phys(data[n=4+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:30749000 ph data[4]=0:30749000 (fff) get Phys(data[n=5+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:2e5ca000 ph data[5]=0:2e5ca000 (fff) get Phys(data[n=6+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:28703000 ph data[6]=0:28703000 (fff) get Phys(data[n=7+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38b6c000 set TERM ph data[7]=0:38b6c000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef30, Count 0x42(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x8, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4200, WordsLeft 4200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8400, full size 8400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38c2c000 ph data[0]=0:38c2c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28595000 set TERM ph data[1]=0:28595000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904ef80, OrigWordsRequested 0x1a00, DevSize 0x1a IdeReadWrite (REQ): Starting sector is 3904ef80, Number of WORDS 0x1a00, DevSize 0x1a AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c0a000, count 3400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38c84000 ph data[0]=0:38c84000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:37805000 ph data[1]=0:37805000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38c96000 ph data[2]=0:38c96000 (fff) get Phys(data[n=3+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:36a9f000 set TERM ph data[3]=0:36a9f000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904ef80, Count 0x1a(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x4, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1a00, WordsLeft 1a00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3400, full size 3400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38ca4000 ph data[0]=0:38ca4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38ca5000 set TERM ph data[0]=0:38ca4000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x1, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904efa0, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 3904efa0, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c0a000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38ce4000 ph data[0]=0:38ce4000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38c35000 ph data[1]=0:38c35000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38c6e000 set TERM ph data[2]=0:38c6e000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904efa0, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x3, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38c3c000 ph data[0]=0:38c3c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38c7d000 set TERM ph data[1]=0:38c7d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x2, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb6779048 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904efc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3904efc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bf4000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:360bc000 ph data[0]=0:360bc000 (fff) get Phys(data[n=1+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:36a8d000 ph data[1]=0:36a8d000 (fff) get Phys(data[n=2+1000]=f6bf6000) AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:36a86000 ph data[2]=0:36a86000 (fff) get Phys(data[n=3+1000]=f6bf7000) AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:360b7000 ph data[3]=0:360b7000 (fff) get Phys(data[n=4+1000]=f6bf8000) AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:37820000 ph data[4]=0:37820000 (fff) get Phys(data[n=5+1000]=f6bf9000) AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:6fa29000 ph data[5]=0:6fa29000 (fff) get Phys(data[n=6+1000]=f6bfa000) AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:360ba000 ph data[6]=0:360ba000 (fff) get Phys(data[n=7+1000]=f6bfb000) AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:38d6b000 ph data[7]=0:38d6b000 (fff) get Phys(data[n=8+1000]=f6bfc000) AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:6fa24000 ph data[8]=0:6fa24000 (fff) get Phys(data[n=9+1000]=f6bfd000) AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:6fa25000 ph data[8]=0:6fa24000 (1fff) get Phys(data[n=9+2000]=f6bfe000) AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:30726000 ph data[9]=0:30726000 (fff) get Phys(data[n=10+1000]=f6bff000) AtapiVirtToPhysAddr_: f6bff000 -> 00000000:2f9ef000 ph data[10]=0:2f9ef000 (fff) get Phys(data[n=11+1000]=f6c00000) AtapiVirtToPhysAddr_: f6c00000 -> 00000000:30710000 ph data[11]=0:30710000 (fff) get Phys(data[n=12+1000]=f6c01000) AtapiVirtToPhysAddr_: f6c01000 -> 00000000:2e4b9000 ph data[12]=0:2e4b9000 (fff) get Phys(data[n=13+1000]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:388ea000 ph data[13]=0:388ea000 (fff) get Phys(data[n=14+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:2ee8b000 set TERM ph data[14]=0:2ee8b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904efc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0xf, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f040, OrigWordsRequested 0x4600, DevSize 0x46 IdeReadWrite (REQ): Starting sector is 3904f040, Number of WORDS 0x4600, DevSize 0x46 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c04000, count 8c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:6fa2c000 ph data[0]=0:6fa2c000 (fff) get Phys(data[n=1+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:6fa2d000 ph data[0]=0:6fa2c000 (1fff) get Phys(data[n=1+2000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:3072e000 ph data[1]=0:3072e000 (fff) get Phys(data[n=2+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:2ee6f000 ph data[2]=0:2ee6f000 (fff) get Phys(data[n=3+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:30720000 ph data[3]=0:30720000 (fff) get Phys(data[n=4+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:2e4c1000 ph data[4]=0:2e4c1000 (fff) get Phys(data[n=5+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:6fa4a000 ph data[5]=0:6fa4a000 (fff) get Phys(data[n=6+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:2ee93000 ph data[6]=0:2ee93000 (fff) get Phys(data[n=7+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:6fa34000 set TERM ph data[7]=0:6fa34000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a0c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f040, Count 0x46(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x8, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4600, WordsLeft 4600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8c00, full size 8c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38d54000 ph data[0]=0:38d54000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38a95000 set TERM ph data[1]=0:38a95000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f090, OrigWordsRequested 0x500, DevSize 0x5 IdeReadWrite (REQ): Starting sector is 3904f090, Number of WORDS 0x500, DevSize 0x5 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:37804000 set TERM ph data[0]=0:37804000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f090, Count 0x5(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 500, WordsLeft 500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a00, full size a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3780c000 ph data[0]=0:3780c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:377f5000 set TERM ph data[1]=0:377f5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f0a0, OrigWordsRequested 0xf00, DevSize 0xf IdeReadWrite (REQ): Starting sector is 3904f0a0, Number of WORDS 0xf00, DevSize 0xf AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 1e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:36a94000 ph data[0]=0:36a94000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:377ed000 set TERM ph data[1]=0:377ed000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f0a0, Count 0xf(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered f00, WordsLeft f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1e00, full size 1e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38d44000 ph data[0]=0:38d44000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:388d5000 set TERM ph data[1]=0:388d5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f0b0, OrigWordsRequested 0x2600, DevSize 0x26 IdeReadWrite (REQ): Starting sector is 3904f0b0, Number of WORDS 0x2600, DevSize 0x26 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c08000, count 4c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:38c54000 ph data[0]=0:38c54000 (fff) get Phys(data[n=1+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:377cd000 ph data[1]=0:377cd000 (fff) get Phys(data[n=2+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38c46000 ph data[2]=0:38c46000 (fff) get Phys(data[n=3+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:286d7000 ph data[3]=0:286d7000 (fff) get Phys(data[n=4+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:38c28000 set TERM ph data[4]=0:38c28000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f0b0, Count 0x26(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x5, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2600, WordsLeft 2600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4c00, full size 4c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:388d4000 ph data[0]=0:388d4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38c95000 set TERM ph data[1]=0:38c95000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f0e0, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 3904f0e0, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:360c4000 ph data[0]=0:360c4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:36a95000 set TERM ph data[1]=0:36a95000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f0e0, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38bac000 ph data[0]=0:38bac000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38d6d000 set TERM ph data[1]=0:38d6d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f0f0, OrigWordsRequested 0x2800, DevSize 0x28 IdeReadWrite (REQ): Starting sector is 3904f0f0, Number of WORDS 0x2800, DevSize 0x28 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c08000, count 5000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:35914000 ph data[0]=0:35914000 (fff) get Phys(data[n=1+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:36aa5000 ph data[1]=0:36aa5000 (fff) get Phys(data[n=2+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:36a96000 ph data[2]=0:36a96000 (fff) get Phys(data[n=3+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:38a27000 ph data[3]=0:38a27000 (fff) get Phys(data[n=4+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:37830000 set TERM ph data[4]=0:37830000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f0f0, Count 0x28(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x5, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2800, WordsLeft 2800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5000, full size 5000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f8a4000 ph data[0]=0:3f8a4000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:388dd000 set TERM ph data[1]=0:388dd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f120, OrigWordsRequested 0x700, DevSize 0x7 IdeReadWrite (REQ): Starting sector is 3904f120, Number of WORDS 0x700, DevSize 0x7 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f8ac000 set TERM ph data[0]=0:3f8ac000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f120, Count 0x7(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 700, WordsLeft 700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e00, full size e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f93c000 ph data[0]=0:3f93c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f8fd000 set TERM ph data[1]=0:3f8fd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f130, OrigWordsRequested 0x900, DevSize 0x9 IdeReadWrite (REQ): Starting sector is 3904f130, Number of WORDS 0x900, DevSize 0x9 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 1200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f8ec000 ph data[0]=0:3f8ec000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f905000 set TERM ph data[1]=0:3f905000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f130, Count 0x9(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 900, WordsLeft 900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1200, full size 1200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38d14000 ph data[0]=0:38d14000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:38d0d000 set TERM ph data[1]=0:38d0d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f140, OrigWordsRequested 0x500, DevSize 0x5 IdeReadWrite (REQ): Starting sector is 3904f140, Number of WORDS 0x500, DevSize 0x5 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2afc4000 set TERM ph data[0]=0:2afc4000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f140, Count 0x5(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 500, WordsLeft 500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a00, full size a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38b6c000 ph data[0]=0:38b6c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3781d000 set TERM ph data[1]=0:3781d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f150, OrigWordsRequested 0x1d00, DevSize 0x1d IdeReadWrite (REQ): Starting sector is 3904f150, Number of WORDS 0x1d00, DevSize 0x1d AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c0a000, count 3a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:38c74000 ph data[0]=0:38c74000 (fff) get Phys(data[n=1+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:3c4fd000 ph data[1]=0:3c4fd000 (fff) get Phys(data[n=2+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:3f76e000 ph data[2]=0:3f76e000 (fff) get Phys(data[n=3+1000]=f6c0d000) AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:38c6f000 set TERM ph data[3]=0:38c6f000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f150, Count 0x1d(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1d00, WordsLeft 1d00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3a00, full size 3a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3b354000 ph data[0]=0:3b354000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3898d000 set TERM ph data[1]=0:3898d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f170, OrigWordsRequested 0x5700, DevSize 0x57 IdeReadWrite (REQ): Starting sector is 3904f170, Number of WORDS 0x5700, DevSize 0x57 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c02000, count ae00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c02000) AtapiVirtToPhysAddr_: f6c02000 -> 00000000:360d4000 ph data[0]=0:360d4000 (fff) get Phys(data[n=1+1000]=f6c03000) AtapiVirtToPhysAddr_: f6c03000 -> 00000000:388e5000 ph data[1]=0:388e5000 (fff) get Phys(data[n=2+1000]=f6c04000) AtapiVirtToPhysAddr_: f6c04000 -> 00000000:3bdbe000 ph data[2]=0:3bdbe000 (fff) get Phys(data[n=3+1000]=f6c05000) AtapiVirtToPhysAddr_: f6c05000 -> 00000000:3f90f000 ph data[3]=0:3f90f000 (fff) get Phys(data[n=4+1000]=f6c06000) AtapiVirtToPhysAddr_: f6c06000 -> 00000000:3f900000 ph data[4]=0:3f900000 (fff) get Phys(data[n=5+1000]=f6c07000) AtapiVirtToPhysAddr_: f6c07000 -> 00000000:30739000 ph data[5]=0:30739000 (fff) get Phys(data[n=6+1000]=f6c08000) AtapiVirtToPhysAddr_: f6c08000 -> 00000000:36aaa000 ph data[6]=0:36aaa000 (fff) get Phys(data[n=7+1000]=f6c09000) AtapiVirtToPhysAddr_: f6c09000 -> 00000000:30703000 ph data[7]=0:30703000 (fff) get Phys(data[n=8+1000]=f6c0a000) AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:360cc000 ph data[8]=0:360cc000 (fff) get Phys(data[n=9+1000]=f6c0b000) AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:36a9d000 ph data[9]=0:36a9d000 (fff) get Phys(data[n=10+1000]=f6c0c000) AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:3f90e000 set TERM ph data[10]=0:3f90e000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f170, Count 0x57(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xb, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5700, WordsLeft 5700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ae00, full size ae00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:40214000 ph data[0]=0:40214000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:4021d000 set TERM ph data[1]=0:4021d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request (win32ss/user/ntuser/msgqueue.c:1271) err: MsqSendMessage timed out 2 Status 102 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f1d0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3904f1d0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:662c0000 set TERM ph data[0]=0:662c0000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f1d0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1f70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1f70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:60c8f000 ph data[0]=0:60c8f000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:65f88000 ph data[1]=0:65f88000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3fed9000 ph data[2]=0:3fed9000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:60c82000 ph data[3]=0:60c82000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:60c9b000 ph data[4]=0:60c9b000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:67784000 ph data[5]=0:67784000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:5e555000 ph data[6]=0:5e555000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:65fa6000 ph data[7]=0:65fa6000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:6778f000 ph data[8]=0:6778f000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:65f80000 ph data[9]=0:65f80000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3fed1000 ph data[10]=0:3fed1000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:60c7a000 ph data[11]=0:60c7a000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:60c93000 ph data[12]=0:60c93000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:6777c000 ph data[13]=0:6777c000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:6778d000 ph data[14]=0:6778d000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:65f9e000 set TERM ph data[15]=0:65f9e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1f70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1ff0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1ff0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:67787000 ph data[0]=0:67787000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:65f78000 ph data[1]=0:65f78000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3fec9000 ph data[2]=0:3fec9000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:67792000 ph data[3]=0:67792000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:60c8b000 ph data[4]=0:60c8b000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:67774000 ph data[5]=0:67774000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:67785000 ph data[6]=0:67785000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:65f96000 ph data[7]=0:65f96000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:6777f000 ph data[8]=0:6777f000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:647d8000 ph data[9]=0:647d8000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:401e9000 ph data[10]=0:401e9000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:6778a000 ph data[11]=0:6778a000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:60c83000 ph data[12]=0:60c83000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:6776c000 ph data[13]=0:6776c000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:6777d000 ph data[14]=0:6777d000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:65f8e000 set TERM ph data[15]=0:65f8e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff2070, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff2070, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:67777000 ph data[0]=0:67777000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:647d0000 ph data[1]=0:647d0000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:60cb9000 ph data[2]=0:60cb9000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:67782000 ph data[3]=0:67782000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:5e55b000 ph data[4]=0:5e55b000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:67764000 ph data[5]=0:67764000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:67775000 ph data[6]=0:67775000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:65f86000 ph data[7]=0:65f86000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:6776f000 ph data[8]=0:6776f000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:647c8000 ph data[9]=0:647c8000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:60cb1000 ph data[10]=0:60cb1000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:6777a000 ph data[11]=0:6777a000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:67793000 ph data[12]=0:67793000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:6775c000 ph data[13]=0:6775c000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:6776d000 ph data[14]=0:6776d000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:65f7e000 set TERM ph data[15]=0:65f7e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff20f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff20f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:67767000 ph data[0]=0:67767000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:647c0000 ph data[1]=0:647c0000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:60ca9000 ph data[2]=0:60ca9000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:67772000 ph data[3]=0:67772000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:6778b000 ph data[4]=0:6778b000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:67754000 ph data[5]=0:67754000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:67765000 ph data[6]=0:67765000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:65f76000 ph data[7]=0:65f76000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:6775f000 ph data[8]=0:6775f000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:647b8000 ph data[9]=0:647b8000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:60ca1000 ph data[10]=0:60ca1000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:6776a000 ph data[11]=0:6776a000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:67783000 ph data[12]=0:67783000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:662c4000 ph data[13]=0:662c4000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:6775d000 ph data[14]=0:6775d000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:647d6000 set TERM ph data[15]=0:647d6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:65f9f000 ph data[0]=0:65f9f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:64250000 set TERM ph data[1]=0:64250000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1ff0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff2070, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff20f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff2170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff2170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3fe4d000 ph data[0]=0:3fe4d000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:3fec6000 ph data[1]=0:3fec6000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:401f7000 ph data[2]=0:401f7000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:60ca8000 ph data[3]=0:60ca8000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f811000 ph data[4]=0:3f811000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:4020a000 ph data[5]=0:4020a000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:40213000 ph data[6]=0:40213000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:3fe4c000 ph data[7]=0:3fe4c000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:401f5000 ph data[8]=0:401f5000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3fece000 ph data[9]=0:3fece000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:401ff000 ph data[10]=0:401ff000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:60cb0000 ph data[11]=0:60cb0000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f819000 ph data[12]=0:3f819000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:40212000 ph data[13]=0:40212000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:4021b000 ph data[14]=0:4021b000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3fe54000 set TERM ph data[15]=0:3fe54000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff2170, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff21f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff21f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:401fd000 ph data[0]=0:401fd000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3fed6000 ph data[1]=0:3fed6000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:40207000 ph data[2]=0:40207000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:60cb8000 ph data[3]=0:60cb8000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f821000 ph data[4]=0:3f821000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:4021a000 ph data[5]=0:4021a000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:40223000 ph data[6]=0:40223000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:401fc000 ph data[7]=0:401fc000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:40205000 ph data[8]=0:40205000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3fede000 ph data[9]=0:3fede000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:4020f000 ph data[10]=0:4020f000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3fec8000 ph data[11]=0:3fec8000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3f7a9000 ph data[12]=0:3f7a9000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:40222000 ph data[13]=0:40222000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:4022b000 ph data[14]=0:4022b000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:40204000 set TERM ph data[15]=0:40204000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ddc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff21f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff2270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff2270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:4020d000 ph data[0]=0:4020d000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3fee6000 ph data[1]=0:3fee6000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:40217000 ph data[2]=0:40217000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:3fed0000 ph data[3]=0:3fed0000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3f7b1000 ph data[4]=0:3f7b1000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:4022a000 ph data[5]=0:4022a000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:40233000 ph data[6]=0:40233000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:4020c000 ph data[7]=0:4020c000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:40215000 ph data[8]=0:40215000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3feee000 ph data[9]=0:3feee000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:4021f000 ph data[10]=0:4021f000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3fed8000 ph data[11]=0:3fed8000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f7b9000 ph data[12]=0:3f7b9000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3f7ea000 ph data[13]=0:3f7ea000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3f7a3000 ph data[14]=0:3f7a3000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:40214000 set TERM ph data[15]=0:40214000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff2270, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff22f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff22f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:4021d000 ph data[0]=0:4021d000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:3fef6000 ph data[1]=0:3fef6000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:40227000 ph data[2]=0:40227000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:65fb0000 ph data[3]=0:65fb0000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3fe19000 ph data[4]=0:3fe19000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:60caa000 ph data[5]=0:60caa000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:401eb000 ph data[6]=0:401eb000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:60c9c000 ph data[7]=0:60c9c000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:60ca5000 ph data[8]=0:60ca5000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:662a6000 ph data[9]=0:662a6000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:60caf000 ph data[10]=0:60caf000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:66290000 ph data[11]=0:66290000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3fe21000 ph data[12]=0:3fe21000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:60cb2000 ph data[13]=0:60cb2000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:401f3000 ph data[14]=0:401f3000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:60ca4000 set TERM ph data[15]=0:60ca4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f1e0, OrigWordsRequested 0x600, DevSize 0x6 IdeReadWrite (REQ): Starting sector is 3904f1e0, Number of WORDS 0x600, DevSize 0x6 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6c40000, count c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:60cad000 set TERM ph data[0]=0:60cad000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request (win32ss/user/ntuser/msgqueue.c:1271) err: MsqSendMessage timed out 2 Status 102 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff22f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f1e0, Count 0x6(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x1, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 600, WordsLeft 600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered c00, full size c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08b04 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38facbf0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38facbf0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:6628f000 ph data[0]=0:6628f000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:645e0000 set TERM ph data[1]=0:645e0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38facbf0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:67757000 ph data[0]=0:67757000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38be8000 set TERM ph data[1]=0:38be8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59230 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904f1f0, OrigWordsRequested 0xe00, DevSize 0xe IdeReadWrite (REQ): Starting sector is 3904f1f0, Number of WORDS 0xe00, DevSize 0xe AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b82000, count 1c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3fe17000 ph data[0]=0:3fe17000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:67780000 set TERM ph data[1]=0:67780000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904f1f0, Count 0xe(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered e00, WordsLeft e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1c00, full size 1c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b58cec ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e7a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e7a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3f79f000 ph data[0]=0:3f79f000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:3fe28000 set TERM ph data[1]=0:3fe28000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e7a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x2, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e38320 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8940, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8940, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3f7cf000 ph data[0]=0:3f7cf000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:3fee8000 ph data[1]=0:3fee8000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3bdb9000 ph data[2]=0:3bdb9000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:389e2000 ph data[3]=0:389e2000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f7d3000 ph data[4]=0:3f7d3000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:3b354000 ph data[5]=0:3b354000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3f7c5000 ph data[6]=0:3f7c5000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:40206000 ph data[7]=0:40206000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:38c57000 ph data[8]=0:38c57000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3fef0000 ph data[9]=0:3fef0000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3f7c1000 ph data[10]=0:3f7c1000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:3f6f2000 ph data[11]=0:3f6f2000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:38b73000 ph data[12]=0:38b73000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:4022c000 ph data[13]=0:4022c000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3c4f5000 ph data[14]=0:3c4f5000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:4020e000 set TERM ph data[15]=0:4020e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8940, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e89c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e89c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3cacf000 ph data[0]=0:3cacf000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3fef8000 ph data[1]=0:3fef8000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3f7c9000 ph data[2]=0:3f7c9000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:3f7fa000 ph data[3]=0:3f7fa000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3d843000 ph data[4]=0:3d843000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:40234000 ph data[5]=0:40234000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3898d000 ph data[6]=0:3898d000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:38996000 ph data[7]=0:38996000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3f7a7000 ph data[8]=0:3f7a7000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3ff00000 ph data[9]=0:3ff00000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3f7d1000 ph data[10]=0:3f7d1000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3f802000 ph data[11]=0:3f802000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3f7f3000 ph data[12]=0:3f7f3000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3f7a4000 ph data[13]=0:3f7a4000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3f7a5000 ph data[13]=0:3f7a4000 (1fff) get Phys(data[n=14+2000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3f8ee000 set TERM ph data[14]=0:3f8ee000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8a40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8a40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3f7ef000 ph data[0]=0:3f7ef000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3fe18000 ph data[1]=0:3fe18000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3f7d9000 ph data[2]=0:3f7d9000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:3f80a000 ph data[3]=0:3f80a000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3f7fb000 ph data[4]=0:3f7fb000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f7ec000 ph data[5]=0:3f7ec000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:3f7ed000 ph data[5]=0:3f7ec000 (1fff) get Phys(data[n=6+2000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3fe1e000 ph data[6]=0:3fe1e000 (fff) get Phys(data[n=7+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3f7f7000 ph data[7]=0:3f7f7000 (fff) get Phys(data[n=8+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3fe20000 ph data[8]=0:3fe20000 (fff) get Phys(data[n=9+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:3f7e1000 ph data[9]=0:3f7e1000 (fff) get Phys(data[n=10+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f812000 ph data[10]=0:3f812000 (fff) get Phys(data[n=11+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f803000 ph data[11]=0:3f803000 (fff) get Phys(data[n=12+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3f7f4000 ph data[12]=0:3f7f4000 (fff) get Phys(data[n=13+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3f7f5000 ph data[12]=0:3f7f4000 (1fff) get Phys(data[n=13+2000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3fe26000 set TERM ph data[13]=0:3fe26000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b591e0 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8ac0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8ac0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3f7ff000 ph data[0]=0:3f7ff000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:38d20000 ph data[1]=0:38d20000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:3f729000 ph data[2]=0:3f729000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3f81a000 ph data[3]=0:3f81a000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3f80b000 ph data[4]=0:3f80b000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3f7fc000 ph data[5]=0:3f7fc000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3f7fd000 ph data[5]=0:3f7fc000 (1fff) get Phys(data[n=6+2000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:3fe2e000 ph data[6]=0:3fe2e000 (fff) get Phys(data[n=7+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:3f807000 ph data[7]=0:3f807000 (fff) get Phys(data[n=8+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:3f900000 ph data[8]=0:3f900000 (fff) get Phys(data[n=9+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:3f731000 ph data[9]=0:3f731000 (fff) get Phys(data[n=10+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f822000 ph data[10]=0:3f822000 (fff) get Phys(data[n=11+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3f813000 ph data[11]=0:3f813000 (fff) get Phys(data[n=12+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:360cc000 ph data[12]=0:360cc000 (fff) get Phys(data[n=13+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3f805000 ph data[13]=0:3f805000 (fff) get Phys(data[n=14+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:3fe36000 set TERM ph data[14]=0:3fe36000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08690 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3f6cf000 ph data[0]=0:3f6cf000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:3f930000 set TERM ph data[1]=0:3f930000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e89c0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8a40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xe, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8ac0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0xf, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8d40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8d40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bac000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:662c7000 ph data[0]=0:662c7000 (fff) get Phys(data[n=1+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:647b0000 ph data[1]=0:647b0000 (fff) get Phys(data[n=2+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:60c99000 ph data[2]=0:60c99000 (fff) get Phys(data[n=3+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:67762000 ph data[3]=0:67762000 (fff) get Phys(data[n=4+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:3f81b000 ph data[4]=0:3f81b000 (fff) get Phys(data[n=5+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:360d4000 ph data[5]=0:360d4000 (fff) get Phys(data[n=6+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:3f80d000 ph data[6]=0:3f80d000 (fff) get Phys(data[n=7+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:3fe3e000 ph data[7]=0:3fe3e000 (fff) get Phys(data[n=8+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:662bf000 ph data[8]=0:662bf000 (fff) get Phys(data[n=9+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:647a8000 ph data[9]=0:647a8000 (fff) get Phys(data[n=10+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:60c91000 ph data[10]=0:60c91000 (fff) get Phys(data[n=11+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:6775a000 ph data[11]=0:6775a000 (fff) get Phys(data[n=12+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:67773000 ph data[12]=0:67773000 (fff) get Phys(data[n=13+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:662b4000 ph data[13]=0:662b4000 (fff) get Phys(data[n=14+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:662bd000 ph data[14]=0:662bd000 (fff) get Phys(data[n=15+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:647be000 set TERM ph data[15]=0:647be000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8dc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8dc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bbc000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:662b7000 ph data[0]=0:662b7000 (fff) get Phys(data[n=1+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:647a0000 ph data[1]=0:647a0000 (fff) get Phys(data[n=2+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:60c89000 ph data[2]=0:60c89000 (fff) get Phys(data[n=3+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:662d2000 ph data[3]=0:662d2000 (fff) get Phys(data[n=4+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:6776b000 ph data[4]=0:6776b000 (fff) get Phys(data[n=5+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:662ac000 ph data[5]=0:662ac000 (fff) get Phys(data[n=6+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:662b5000 ph data[6]=0:662b5000 (fff) get Phys(data[n=7+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:647b6000 ph data[7]=0:647b6000 (fff) get Phys(data[n=8+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:662af000 ph data[8]=0:662af000 (fff) get Phys(data[n=9+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:64600000 ph data[9]=0:64600000 (fff) get Phys(data[n=10+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:60c81000 ph data[10]=0:60c81000 (fff) get Phys(data[n=11+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:662ca000 ph data[11]=0:662ca000 (fff) get Phys(data[n=12+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:67763000 ph data[12]=0:67763000 (fff) get Phys(data[n=13+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:662a4000 ph data[13]=0:662a4000 (fff) get Phys(data[n=14+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:662ad000 ph data[14]=0:662ad000 (fff) get Phys(data[n=15+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:647ae000 set TERM ph data[15]=0:647ae000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8e40, OrigWordsRequested 0x2800, DevSize 0x28 IdeReadWrite (REQ): Starting sector is 395e8e40, Number of WORDS 0x2800, DevSize 0x28 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bcc000, count 5000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:662a7000 ph data[0]=0:662a7000 (fff) get Phys(data[n=1+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:645f8000 ph data[1]=0:645f8000 (fff) get Phys(data[n=2+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:67789000 ph data[2]=0:67789000 (fff) get Phys(data[n=3+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:662c2000 ph data[3]=0:662c2000 (fff) get Phys(data[n=4+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:6775b000 set TERM ph data[4]=0:6775b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8d40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08b04 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac360, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac360, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3feff000 ph data[0]=0:3feff000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:67778000 set TERM ph data[1]=0:67778000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8dc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8e40, Count 0x28(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x5, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2800, WordsLeft 2800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5000, full size 5000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac360, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8b40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8b40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3fe17000 ph data[0]=0:3fe17000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:64218000 ph data[1]=0:64218000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:66299000 ph data[2]=0:66299000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:647da000 ph data[3]=0:647da000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3fe33000 ph data[4]=0:3fe33000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:3fefc000 ph data[5]=0:3fefc000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3ff05000 ph data[6]=0:3ff05000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:6778e000 ph data[7]=0:6778e000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:647cf000 ph data[8]=0:647cf000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:64220000 ph data[9]=0:64220000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:662a9000 ph data[10]=0:662a9000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:65f72000 ph data[11]=0:65f72000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3fe2b000 ph data[12]=0:3fe2b000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:3fef4000 ph data[13]=0:3fef4000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3fefd000 ph data[14]=0:3fefd000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:67786000 set TERM ph data[15]=0:67786000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8bc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8bc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:647d7000 ph data[0]=0:647d7000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:64228000 ph data[1]=0:64228000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:662b1000 ph data[2]=0:662b1000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:65f7a000 ph data[3]=0:65f7a000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:65f83000 ph data[4]=0:65f83000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:647bc000 ph data[5]=0:647bc000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:647c5000 ph data[6]=0:647c5000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:6422e000 ph data[7]=0:6422e000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:65f77000 ph data[8]=0:65f77000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:64230000 ph data[9]=0:64230000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:662b9000 ph data[10]=0:662b9000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:65f82000 ph data[11]=0:65f82000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:65f8b000 ph data[12]=0:65f8b000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:647c4000 ph data[13]=0:647c4000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:647cd000 ph data[14]=0:647cd000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:64236000 set TERM ph data[15]=0:64236000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8c40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8c40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:65f7f000 ph data[0]=0:65f7f000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:64238000 ph data[1]=0:64238000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:662c1000 ph data[2]=0:662c1000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:65f8a000 ph data[3]=0:65f8a000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:65f93000 ph data[4]=0:65f93000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:647cc000 ph data[5]=0:647cc000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:647d5000 ph data[6]=0:647d5000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:6423e000 ph data[7]=0:6423e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:65f87000 ph data[8]=0:65f87000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:64240000 ph data[9]=0:64240000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:662c9000 ph data[10]=0:662c9000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:65f92000 ph data[11]=0:65f92000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:65f9b000 ph data[12]=0:65f9b000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:647d4000 ph data[13]=0:647d4000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:65f75000 ph data[14]=0:65f75000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:64246000 set TERM ph data[15]=0:64246000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8cc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8cc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:65f8f000 ph data[0]=0:65f8f000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:64248000 ph data[1]=0:64248000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:662d1000 ph data[2]=0:662d1000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:65f9a000 ph data[3]=0:65f9a000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:65fa3000 ph data[4]=0:65fa3000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:65f74000 ph data[5]=0:65f74000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:65f7d000 ph data[6]=0:65f7d000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:6424e000 ph data[7]=0:6424e000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:65f97000 ph data[8]=0:65f97000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:64250000 ph data[9]=0:64250000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:67751000 ph data[10]=0:67751000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:65fa2000 ph data[11]=0:65fa2000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:65fab000 ph data[12]=0:65fab000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:65f7c000 ph data[13]=0:65f7c000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:65f85000 ph data[14]=0:65f85000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:645c6000 set TERM ph data[15]=0:645c6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (win32ss/user/ntuser/msgqueue.c:1271) err: MsqSendMessage timed out 2 Status 102 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c4c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8b40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c4c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8bc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69048 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8c40, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68dd8 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8cc0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb677b078 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390525b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390525b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:38a57000 ph data[0]=0:38a57000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:2e460000 ph data[1]=0:2e460000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2e549000 ph data[2]=0:2e549000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:2e562000 ph data[3]=0:2e562000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f773000 ph data[4]=0:3f773000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2e5fc000 ph data[5]=0:2e5fc000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2e4ed000 ph data[6]=0:2e4ed000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:3f6ce000 ph data[7]=0:3f6ce000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:2e577000 ph data[8]=0:2e577000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2e458000 ph data[9]=0:2e458000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2ed99000 ph data[10]=0:2ed99000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:2e56a000 ph data[11]=0:2e56a000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:2e623000 ph data[12]=0:2e623000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2e604000 ph data[13]=0:2e604000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:2e4a5000 ph data[14]=0:2e4a5000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3f876000 set TERM ph data[15]=0:3f876000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390525b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052630, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052630, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:2e427000 ph data[0]=0:2e427000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:2ed88000 ph data[1]=0:2ed88000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2ed91000 ph data[2]=0:2ed91000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2e572000 ph data[3]=0:2e572000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2ed7b000 ph data[4]=0:2ed7b000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3f8ec000 ph data[5]=0:3f8ec000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2e5bd000 ph data[6]=0:2e5bd000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:2e48e000 ph data[7]=0:2e48e000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:2e41f000 ph data[8]=0:2e41f000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3f718000 ph data[9]=0:3f718000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3b371000 ph data[10]=0:3b371000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2e57a000 ph data[11]=0:2e57a000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:2e443000 ph data[12]=0:2e443000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2e52c000 ph data[13]=0:2e52c000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:2e5c5000 ph data[14]=0:2e5c5000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:2e486000 set TERM ph data[15]=0:2e486000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390526b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390526b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:2e417000 ph data[0]=0:2e417000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3f720000 ph data[1]=0:3f720000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3b369000 ph data[2]=0:3b369000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:3f94a000 ph data[3]=0:3f94a000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2e43b000 ph data[4]=0:2e43b000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:2e534000 ph data[5]=0:2e534000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:3f905000 ph data[6]=0:3f905000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:2e47e000 ph data[7]=0:2e47e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:2e40f000 ph data[8]=0:2e40f000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:28598000 ph data[9]=0:28598000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:28429000 ph data[10]=0:28429000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:2c8fa000 ph data[11]=0:2c8fa000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:2e433000 ph data[12]=0:2e433000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:2e53c000 ph data[13]=0:2e53c000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:2e575000 ph data[14]=0:2e575000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:2e476000 set TERM ph data[15]=0:2e476000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b59600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39052730, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39052730, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:2e407000 ph data[0]=0:2e407000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:28458000 ph data[1]=0:28458000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:28431000 ph data[2]=0:28431000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2c8da000 ph data[3]=0:2c8da000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3f8d3000 ph data[4]=0:3f8d3000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:35904000 ph data[5]=0:35904000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2e57d000 ph data[6]=0:2e57d000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:2edb6000 ph data[7]=0:2edb6000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2e4ef000 ph data[8]=0:2e4ef000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2e5e8000 ph data[9]=0:2e5e8000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:28401000 ph data[10]=0:28401000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:2c922000 ph data[11]=0:2c922000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2afab000 ph data[12]=0:2afab000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:37824000 ph data[13]=0:37824000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:2e49d000 ph data[14]=0:2e49d000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:2e596000 set TERM ph data[15]=0:2e596000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bbc000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:3f6ff000 ph data[0]=0:3f6ff000 (fff) get Phys(data[n=1+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:2e5e0000 ph data[1]=0:2e5e0000 (fff) get Phys(data[n=2+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:28409000 ph data[2]=0:28409000 (fff) get Phys(data[n=3+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:2b70a000 ph data[3]=0:2b70a000 (fff) get Phys(data[n=4+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:2afa3000 ph data[4]=0:2afa3000 (fff) get Phys(data[n=5+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:388e4000 ph data[5]=0:388e4000 (fff) get Phys(data[n=6+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:2e55d000 ph data[6]=0:2e55d000 (fff) get Phys(data[n=7+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:2e59e000 ph data[7]=0:2e59e000 (fff) get Phys(data[n=8+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:286a7000 ph data[8]=0:286a7000 (fff) get Phys(data[n=9+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:2e5d8000 ph data[9]=0:2e5d8000 (fff) get Phys(data[n=10+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:28411000 ph data[10]=0:28411000 (fff) get Phys(data[n=11+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:360ca000 ph data[11]=0:360ca000 (fff) get Phys(data[n=12+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:2af9b000 ph data[12]=0:2af9b000 (fff) get Phys(data[n=13+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:38cdc000 ph data[13]=0:38cdc000 (fff) get Phys(data[n=14+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:2e615000 ph data[14]=0:2e615000 (fff) get Phys(data[n=15+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:3f87e000 set TERM ph data[15]=0:3f87e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d0e0, OrigWordsRequested 0x2800, DevSize 0x28 IdeReadWrite (REQ): Starting sector is 3960d0e0, Number of WORDS 0x2800, DevSize 0x28 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bcc000, count 5000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:286ff000 ph data[0]=0:286ff000 (fff) get Phys(data[n=1+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:37838000 ph data[1]=0:37838000 (fff) get Phys(data[n=2+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:6fa41000 ph data[2]=0:6fa41000 (fff) get Phys(data[n=3+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:360d2000 ph data[3]=0:360d2000 (fff) get Phys(data[n=4+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:3070b000 set TERM ph data[4]=0:3070b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0919c ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052630, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb677b078 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8c70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8c70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677b078: cmd aligned b677b100, d=28 ahci_cmd_ptr 0xb677b100 AtapiDmaSetup: mode 0x0, data f6aba000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677b100) AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100 get Phys(data[0]=f6aba000) AtapiVirtToPhysAddr_: f6aba000 -> 00000000:2840e000 ph data[0]=0:2840e000 (fff) get Phys(data[n=1+1000]=f6abb000) AtapiVirtToPhysAddr_: f6abb000 -> 00000000:287c7000 ph data[1]=0:287c7000 (fff) get Phys(data[n=2+1000]=f6abc000) AtapiVirtToPhysAddr_: f6abc000 -> 00000000:3f830000 ph data[2]=0:3f830000 (fff) get Phys(data[n=3+1000]=f6abd000) AtapiVirtToPhysAddr_: f6abd000 -> 00000000:38ce1000 ph data[3]=0:38ce1000 (fff) get Phys(data[n=4+1000]=f6abe000) AtapiVirtToPhysAddr_: f6abe000 -> 00000000:2e662000 ph data[4]=0:2e662000 (fff) get Phys(data[n=5+1000]=f6abf000) AtapiVirtToPhysAddr_: f6abf000 -> 00000000:2e613000 ph data[5]=0:2e613000 (fff) get Phys(data[n=6+1000]=f6ac0000) AtapiVirtToPhysAddr_: f6ac0000 -> 00000000:3f8ac000 ph data[6]=0:3f8ac000 (fff) get Phys(data[n=7+1000]=f6ac1000) AtapiVirtToPhysAddr_: f6ac1000 -> 00000000:2af9d000 ph data[7]=0:2af9d000 (fff) get Phys(data[n=8+1000]=f6ac2000) AtapiVirtToPhysAddr_: f6ac2000 -> 00000000:28416000 ph data[8]=0:28416000 (fff) get Phys(data[n=9+1000]=f6ac3000) AtapiVirtToPhysAddr_: f6ac3000 -> 00000000:2841f000 ph data[9]=0:2841f000 (fff) get Phys(data[n=10+1000]=f6ac4000) AtapiVirtToPhysAddr_: f6ac4000 -> 00000000:3f8b8000 ph data[10]=0:3f8b8000 (fff) get Phys(data[n=11+1000]=f6ac5000) AtapiVirtToPhysAddr_: f6ac5000 -> 00000000:3ec59000 ph data[11]=0:3ec59000 (fff) get Phys(data[n=12+1000]=f6ac6000) AtapiVirtToPhysAddr_: f6ac6000 -> 00000000:2e512000 ph data[12]=0:2e512000 (fff) get Phys(data[n=13+1000]=f6ac7000) AtapiVirtToPhysAddr_: f6ac7000 -> 00000000:2e54b000 ph data[13]=0:2e54b000 (fff) get Phys(data[n=14+1000]=f6ac8000) AtapiVirtToPhysAddr_: f6ac8000 -> 00000000:2e4f4000 ph data[14]=0:2e4f4000 (fff) get Phys(data[n=15+1000]=f6ac9000) AtapiVirtToPhysAddr_: f6ac9000 -> 00000000:3f935000 set TERM ph data[15]=0:3f935000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677b100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8cf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8cf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6aca000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6aca000) AtapiVirtToPhysAddr_: f6aca000 -> 00000000:287a6000 ph data[0]=0:287a6000 (fff) get Phys(data[n=1+1000]=f6acb000) AtapiVirtToPhysAddr_: f6acb000 -> 00000000:28427000 ph data[1]=0:28427000 (fff) get Phys(data[n=2+1000]=f6acc000) AtapiVirtToPhysAddr_: f6acc000 -> 00000000:3f828000 ph data[2]=0:3f828000 (fff) get Phys(data[n=3+1000]=f6acd000) AtapiVirtToPhysAddr_: f6acd000 -> 00000000:38961000 ph data[3]=0:38961000 (fff) get Phys(data[n=4+1000]=f6ace000) AtapiVirtToPhysAddr_: f6ace000 -> 00000000:38c2a000 ph data[4]=0:38c2a000 (fff) get Phys(data[n=5+1000]=f6acf000) AtapiVirtToPhysAddr_: f6acf000 -> 00000000:286fb000 ph data[5]=0:286fb000 (fff) get Phys(data[n=6+1000]=f6ad0000) AtapiVirtToPhysAddr_: f6ad0000 -> 00000000:2e46c000 ph data[6]=0:2e46c000 (fff) get Phys(data[n=7+1000]=f6ad1000) AtapiVirtToPhysAddr_: f6ad1000 -> 00000000:3f8c5000 ph data[7]=0:3f8c5000 (fff) get Phys(data[n=8+1000]=f6ad2000) AtapiVirtToPhysAddr_: f6ad2000 -> 00000000:286ee000 ph data[8]=0:286ee000 (fff) get Phys(data[n=9+1000]=f6ad3000) AtapiVirtToPhysAddr_: f6ad3000 -> 00000000:2842f000 ph data[9]=0:2842f000 (fff) get Phys(data[n=10+1000]=f6ad4000) AtapiVirtToPhysAddr_: f6ad4000 -> 00000000:2e5c0000 ph data[10]=0:2e5c0000 (fff) get Phys(data[n=11+1000]=f6ad5000) AtapiVirtToPhysAddr_: f6ad5000 -> 00000000:2c989000 ph data[11]=0:2c989000 (fff) get Phys(data[n=12+1000]=f6ad6000) AtapiVirtToPhysAddr_: f6ad6000 -> 00000000:2e48a000 ph data[12]=0:2e48a000 (fff) get Phys(data[n=13+1000]=f6ad7000) AtapiVirtToPhysAddr_: f6ad7000 -> 00000000:2afb3000 ph data[13]=0:2afb3000 (fff) get Phys(data[n=14+1000]=f6ad8000) AtapiVirtToPhysAddr_: f6ad8000 -> 00000000:2e464000 ph data[14]=0:2e464000 (fff) get Phys(data[n=15+1000]=f6ad9000) AtapiVirtToPhysAddr_: f6ad9000 -> 00000000:389bd000 set TERM ph data[15]=0:389bd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8d70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8d70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6ada000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6ada000) AtapiVirtToPhysAddr_: f6ada000 -> 00000000:286f6000 ph data[0]=0:286f6000 (fff) get Phys(data[n=1+1000]=f6adb000) AtapiVirtToPhysAddr_: f6adb000 -> 00000000:3f88f000 ph data[1]=0:3f88f000 (fff) get Phys(data[n=2+1000]=f6adc000) AtapiVirtToPhysAddr_: f6adc000 -> 00000000:2e638000 ph data[2]=0:2e638000 (fff) get Phys(data[n=3+1000]=f6add000) AtapiVirtToPhysAddr_: f6add000 -> 00000000:2c981000 ph data[3]=0:2c981000 (fff) get Phys(data[n=4+1000]=f6ade000) AtapiVirtToPhysAddr_: f6ade000 -> 00000000:2e482000 ph data[4]=0:2e482000 (fff) get Phys(data[n=5+1000]=f6adf000) AtapiVirtToPhysAddr_: f6adf000 -> 00000000:3d7ab000 ph data[5]=0:3d7ab000 (fff) get Phys(data[n=6+1000]=f6ae0000) AtapiVirtToPhysAddr_: f6ae0000 -> 00000000:2e45c000 ph data[6]=0:2e45c000 (fff) get Phys(data[n=7+1000]=f6ae1000) AtapiVirtToPhysAddr_: f6ae1000 -> 00000000:3780d000 ph data[7]=0:3780d000 (fff) get Phys(data[n=8+1000]=f6ae2000) AtapiVirtToPhysAddr_: f6ae2000 -> 00000000:2a26e000 ph data[8]=0:2a26e000 (fff) get Phys(data[n=9+1000]=f6ae3000) AtapiVirtToPhysAddr_: f6ae3000 -> 00000000:3f6c7000 ph data[9]=0:3f6c7000 (fff) get Phys(data[n=10+1000]=f6ae4000) AtapiVirtToPhysAddr_: f6ae4000 -> 00000000:2e400000 ph data[10]=0:2e400000 (fff) get Phys(data[n=11+1000]=f6ae5000) AtapiVirtToPhysAddr_: f6ae5000 -> 00000000:2c979000 ph data[11]=0:2c979000 (fff) get Phys(data[n=12+1000]=f6ae6000) AtapiVirtToPhysAddr_: f6ae6000 -> 00000000:2e47a000 ph data[12]=0:2e47a000 (fff) get Phys(data[n=13+1000]=f6ae7000) AtapiVirtToPhysAddr_: f6ae7000 -> 00000000:2e573000 ph data[13]=0:2e573000 (fff) get Phys(data[n=14+1000]=f6ae8000) AtapiVirtToPhysAddr_: f6ae8000 -> 00000000:2e454000 ph data[14]=0:2e454000 (fff) get Phys(data[n=15+1000]=f6ae9000) AtapiVirtToPhysAddr_: f6ae9000 -> 00000000:2e50d000 set TERM ph data[15]=0:2e50d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677b078, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e64 ** Ide: Command AtaReq 0xb677b078 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8c70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078 AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100) prd_length 0x10, flags 0x5, base 8e3e100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=7 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f90 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe8df0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fe8df0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6aea000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6aea000) AtapiVirtToPhysAddr_: f6aea000 -> 00000000:3898e000 ph data[0]=0:3898e000 (fff) get Phys(data[n=1+1000]=f6aeb000) AtapiVirtToPhysAddr_: f6aeb000 -> 00000000:3f887000 ph data[1]=0:3f887000 (fff) get Phys(data[n=2+1000]=f6aec000) AtapiVirtToPhysAddr_: f6aec000 -> 00000000:2e448000 ph data[2]=0:2e448000 (fff) get Phys(data[n=3+1000]=f6aed000) AtapiVirtToPhysAddr_: f6aed000 -> 00000000:2c971000 ph data[3]=0:2c971000 (fff) get Phys(data[n=4+1000]=f6aee000) AtapiVirtToPhysAddr_: f6aee000 -> 00000000:2e472000 ph data[4]=0:2e472000 (fff) get Phys(data[n=5+1000]=f6aef000) AtapiVirtToPhysAddr_: f6aef000 -> 00000000:2b713000 ph data[5]=0:2b713000 (fff) get Phys(data[n=6+1000]=f6af0000) AtapiVirtToPhysAddr_: f6af0000 -> 00000000:38c5c000 ph data[6]=0:38c5c000 (fff) get Phys(data[n=7+1000]=f6af1000) AtapiVirtToPhysAddr_: f6af1000 -> 00000000:2e655000 ph data[7]=0:2e655000 (fff) get Phys(data[n=8+1000]=f6af2000) AtapiVirtToPhysAddr_: f6af2000 -> 00000000:3f6fe000 ph data[8]=0:3f6fe000 (fff) get Phys(data[n=9+1000]=f6af3000) AtapiVirtToPhysAddr_: f6af3000 -> 00000000:2e48f000 ph data[9]=0:2e48f000 (fff) get Phys(data[n=10+1000]=f6af4000) AtapiVirtToPhysAddr_: f6af4000 -> 00000000:2e450000 ph data[10]=0:2e450000 (fff) get Phys(data[n=11+1000]=f6af5000) AtapiVirtToPhysAddr_: f6af5000 -> 00000000:2b6f9000 ph data[11]=0:2b6f9000 (fff) get Phys(data[n=12+1000]=f6af6000) AtapiVirtToPhysAddr_: f6af6000 -> 00000000:2e46a000 ph data[12]=0:2e46a000 (fff) get Phys(data[n=13+1000]=f6af7000) AtapiVirtToPhysAddr_: f6af7000 -> 00000000:2e503000 ph data[13]=0:2e503000 (fff) get Phys(data[n=14+1000]=f6af8000) AtapiVirtToPhysAddr_: f6af8000 -> 00000000:38ae4000 ph data[14]=0:38ae4000 (fff) get Phys(data[n=15+1000]=f6af9000) AtapiVirtToPhysAddr_: f6af9000 -> 00000000:2e485000 set TERM ph data[15]=0:2e485000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 8 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=7 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8cf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8d70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe8df0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x10, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390526b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09344 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39052730, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e38320 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e38320, CDB 0xb5e38350, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c092dc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d060, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e38320 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 (win32ss/user/ntuser/winpos.c:1407) err: Window is HWND_BOTTOM hwnd 00000001 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e38320, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e38320 AtapiInterrupt: NextRequest, srb=0xb5e26b60 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e26b60, CDB 0xb5e26b90, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08188 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d0e0, Count 0x28(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x5, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e26b60 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2800, WordsLeft 2800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5000, full size 5000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e26b60, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e26b60 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c07318 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38facbf0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38facbf0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3f88a000 ph data[0]=0:3f88a000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:30703000 set TERM ph data[1]=0:30703000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38facbf0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e2c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38facc00, OrigWordsRequested 0x300, DevSize 0x3 IdeReadWrite (REQ): Starting sector is 38facc00, Number of WORDS 0x300, DevSize 0x3 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2e5ec000 set TERM ph data[0]=0:2e5ec000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38facc00, Count 0x3(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 300, WordsLeft 300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 600, full size 600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff0170, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff0170, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:40200000 ph data[0]=0:40200000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:3f749000 ph data[1]=0:3f749000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3f72a000 ph data[2]=0:3f72a000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:3f6db000 ph data[3]=0:3f6db000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f7dc000 ph data[4]=0:3f7dc000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:3781d000 ph data[5]=0:3781d000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3f7f6000 ph data[6]=0:3f7f6000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:38c2f000 ph data[7]=0:38c2f000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:401f8000 ph data[8]=0:401f8000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3f741000 ph data[9]=0:3f741000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3f7e2000 ph data[10]=0:3f7e2000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:3f863000 ph data[11]=0:3f863000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f7c4000 ph data[12]=0:3f7c4000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:38c65000 ph data[13]=0:38c65000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3f7ee000 ph data[14]=0:3f7ee000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3f857000 set TERM ph data[15]=0:3f857000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff0170, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff01f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff01f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:377a0000 ph data[0]=0:377a0000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3f739000 ph data[1]=0:3f739000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2e5ca000 ph data[2]=0:2e5ca000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:3f85b000 ph data[3]=0:3f85b000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f7bc000 ph data[4]=0:3f7bc000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3f855000 ph data[5]=0:3f855000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:38d3e000 ph data[6]=0:38d3e000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:3f84f000 ph data[7]=0:3f84f000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3f910000 ph data[8]=0:3f910000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:38c79000 ph data[9]=0:38c79000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3b372000 ph data[10]=0:3b372000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3f853000 ph data[11]=0:3f853000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:38b6c000 ph data[12]=0:38b6c000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3f845000 ph data[13]=0:3f845000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:662ae000 ph data[14]=0:662ae000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3f847000 set TERM ph data[15]=0:3f847000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff0270, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff0270, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3f7f8000 ph data[0]=0:3f7f8000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3f911000 ph data[1]=0:3f911000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3f732000 ph data[2]=0:3f732000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:3f84b000 ph data[3]=0:3f84b000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2afbc000 ph data[4]=0:2afbc000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f83d000 ph data[5]=0:3f83d000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:60c8e000 ph data[6]=0:60c8e000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3f83f000 ph data[7]=0:3f83f000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:67780000 ph data[8]=0:67780000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3f759000 ph data[9]=0:3f759000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:3f86a000 ph data[10]=0:3f86a000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3fe43000 ph data[11]=0:3fe43000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f844000 ph data[12]=0:3f844000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3f835000 ph data[13]=0:3f835000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:60c96000 ph data[14]=0:60c96000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3fe1f000 set TERM ph data[15]=0:3fe1f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff02f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff02f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:67788000 ph data[0]=0:67788000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:40219000 ph data[1]=0:40219000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:3fe32000 ph data[2]=0:3fe32000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3fe4b000 ph data[3]=0:3fe4b000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3f83c000 ph data[4]=0:3f83c000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3fe15000 ph data[5]=0:3fe15000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:60ca6000 ph data[6]=0:60ca6000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:3fe27000 ph data[7]=0:3fe27000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:60c80000 ph data[8]=0:60c80000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:40221000 ph data[9]=0:40221000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:3fe3a000 ph data[10]=0:3fe3a000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3fe53000 ph data[11]=0:3fe53000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3ff04000 ph data[12]=0:3ff04000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:3fe1d000 ph data[13]=0:3fe1d000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:60cae000 ph data[14]=0:60cae000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:3fe37000 set TERM ph data[15]=0:3fe37000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request (win32ss/user/ntuser/msgqueue.c:1271) err: MsqSendMessage timed out 2 Status 102 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf992c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff01f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff0270, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff02f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fefb70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fefb70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3fe4f000 ph data[0]=0:3fe4f000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:38ce8000 ph data[1]=0:38ce8000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3f7e9000 ph data[2]=0:3f7e9000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:3fe4a000 ph data[3]=0:3fe4a000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f893000 ph data[4]=0:3f893000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:3fe24000 ph data[5]=0:3fe24000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3fe35000 ph data[6]=0:3fe35000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:647c6000 ph data[7]=0:647c6000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:3f80f000 ph data[8]=0:3f80f000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3f938000 ph data[9]=0:3f938000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3f7f1000 ph data[10]=0:3f7f1000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:3fe52000 ph data[11]=0:3fe52000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:6777b000 ph data[12]=0:6777b000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:3fe2c000 ph data[13]=0:3fe2c000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3fe3d000 ph data[14]=0:3fe3d000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:38d66000 set TERM ph data[15]=0:38d66000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fefb70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fefbf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fefbf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3f7df000 ph data[0]=0:3f7df000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:40208000 ph data[1]=0:40208000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3f7f9000 ph data[2]=0:3f7f9000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:401f2000 ph data[3]=0:401f2000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f7e3000 ph data[4]=0:3f7e3000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3fe34000 ph data[5]=0:3fe34000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:662c5000 ph data[6]=0:662c5000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:60c9e000 ph data[7]=0:60c9e000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3f7d7000 ph data[8]=0:3f7d7000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3f870000 ph data[9]=0:3f870000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:38d81000 ph data[10]=0:38d81000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3f8d2000 ph data[11]=0:3f8d2000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3f7db000 ph data[12]=0:3f7db000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:40224000 ph data[13]=0:40224000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3f7cd000 ph data[14]=0:3f7cd000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3f7fe000 set TERM ph data[15]=0:3f7fe000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fefc70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fefc70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3fe2f000 ph data[0]=0:3fe2f000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:67790000 ph data[1]=0:67790000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:38d89000 ph data[2]=0:38d89000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:38a4a000 ph data[3]=0:38a4a000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3fe3b000 ph data[4]=0:3fe3b000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:662bc000 ph data[5]=0:662bc000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:3fe25000 ph data[6]=0:3fe25000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:38a6e000 ph data[7]=0:38a6e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3fe3f000 ph data[8]=0:3fe3f000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:60c88000 ph data[9]=0:60c88000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:3f799000 ph data[10]=0:3f799000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f842000 ph data[11]=0:3f842000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f7eb000 ph data[12]=0:3f7eb000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3f7d4000 ph data[13]=0:3f7d4000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3f84d000 ph data[14]=0:3f84d000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:401fe000 set TERM ph data[15]=0:401fe000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fefcf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fefcf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3f85f000 ph data[0]=0:3f85f000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:401f0000 ph data[1]=0:401f0000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:3f791000 ph data[2]=0:3f791000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3f83a000 ph data[3]=0:3f83a000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3f733000 ph data[4]=0:3f733000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3f7cc000 ph data[5]=0:3f7cc000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:60cad000 ph data[6]=0:60cad000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:401f6000 ph data[7]=0:401f6000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:3f7c7000 ph data[8]=0:3f7c7000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:401e8000 ph data[9]=0:401e8000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:30749000 ph data[10]=0:30749000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:38bba000 ph data[11]=0:38bba000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3f7cb000 ph data[12]=0:3f7cb000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:3609c000 ph data[13]=0:3609c000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:40225000 ph data[14]=0:40225000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:401ee000 set TERM ph data[15]=0:401ee000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98d4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fefbf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fefc70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fefcf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:4022d000 ph data[0]=0:4022d000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:3fe26000 set TERM ph data[1]=0:3fe26000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac360, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac360, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3f7c5000 ph data[0]=0:3f7c5000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:64246000 set TERM ph data[1]=0:64246000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac360, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e2c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 396319a0, OrigWordsRequested 0x300, DevSize 0x3 IdeReadWrite (REQ): Starting sector is 396319a0, Number of WORDS 0x300, DevSize 0x3 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3ff05000 set TERM ph data[0]=0:3ff05000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396319a0, Count 0x3(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 300, WordsLeft 300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 600, full size 600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3f80d000 ph data[0]=0:3f80d000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38d36000 set TERM ph data[1]=0:38d36000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4230, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4230, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2e41d000 ph data[0]=0:2e41d000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:286ae000 set TERM ph data[1]=0:286ae000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4230, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request (win32ss/user/ntuser/msgqueue.c:1271) err: MsqSendMessage timed out 2 Status 102 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961bd60, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3961bd60, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2e41a000 ph data[0]=0:2e41a000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:2e46b000 set TERM ph data[1]=0:2e46b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961bd60, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4230, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4230, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2e4ea000 ph data[0]=0:2e4ea000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:2e61b000 set TERM ph data[1]=0:2e61b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4230, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961bd60, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3961bd60, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2e44a000 ph data[0]=0:2e44a000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:2e49b000 set TERM ph data[1]=0:2e49b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961bd60, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5dfc0b8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961c180, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3961c180, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:2e542000 ph data[0]=0:2e542000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:2e53b000 ph data[1]=0:2e53b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2c98c000 ph data[2]=0:2c98c000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:388d5000 ph data[3]=0:388d5000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02936000 ph data[4]=0:2936000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2e54f000 ph data[5]=0:2e54f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2e4b0000 ph data[6]=0:2e4b0000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:2b759000 ph data[7]=0:2b759000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:38c92000 ph data[8]=0:38c92000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2e55b000 ph data[9]=0:2e55b000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2c97c000 ph data[10]=0:2c97c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:2e45d000 ph data[11]=0:2e45d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:1306e000 ph data[12]=0:1306e000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2e47f000 ph data[13]=0:2e47f000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:2a258000 ph data[14]=0:2a258000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:2b761000 set TERM ph data[15]=0:2b761000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961c180, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961c200, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3961c200, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:37812000 ph data[0]=0:37812000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:2e563000 ph data[1]=0:2e563000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2b75c000 ph data[2]=0:2b75c000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2e455000 ph data[3]=0:2e455000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2859e000 ph data[4]=0:2859e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:2e477000 ph data[5]=0:2e477000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2a250000 ph data[6]=0:2a250000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:2e629000 ph data[7]=0:2e629000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:388b2000 ph data[8]=0:388b2000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2e56b000 ph data[9]=0:2e56b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:2e51c000 ph data[10]=0:2e51c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2a245000 ph data[11]=0:2a245000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:388be000 ph data[12]=0:388be000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:37797000 ph data[13]=0:37797000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:38d60000 ph data[14]=0:38d60000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:36a81000 set TERM ph data[15]=0:36a81000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961c280, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3961c280, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:2e4b2000 ph data[0]=0:2e4b2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:2e4a3000 ph data[1]=0:2e4a3000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:38d7c000 ph data[2]=0:38d7c000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2858d000 ph data[3]=0:2858d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38c56000 ph data[4]=0:38c56000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:38c8f000 ph data[5]=0:38c8f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38d48000 ph data[6]=0:38d48000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:360c9000 ph data[7]=0:360c9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:2e4aa000 ph data[8]=0:2e4aa000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:377c3000 ph data[9]=0:377c3000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:38d6c000 ph data[10]=0:38d6c000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:2849d000 ph data[11]=0:2849d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:38c4e000 ph data[12]=0:38c4e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:38d47000 ph data[13]=0:38d47000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38c28000 ph data[14]=0:38c28000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:38d11000 set TERM ph data[15]=0:38d11000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961c300, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3961c300, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:2e402000 ph data[0]=0:2e402000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:388bb000 ph data[1]=0:388bb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:38c54000 ph data[2]=0:38c54000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:38c45000 ph data[3]=0:38c45000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:38c46000 ph data[3]=0:38c45000 (1fff) get Phys(data[n=4+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:286d7000 ph data[4]=0:286d7000 (fff) get Phys(data[n=5+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2ee88000 ph data[5]=0:2ee88000 (fff) get Phys(data[n=6+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:2e4f1000 ph data[6]=0:2e4f1000 (fff) get Phys(data[n=7+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2ed62000 ph data[7]=0:2ed62000 (fff) get Phys(data[n=8+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:37803000 ph data[8]=0:37803000 (fff) get Phys(data[n=9+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2fa54000 ph data[9]=0:2fa54000 (fff) get Phys(data[n=10+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:377c5000 ph data[10]=0:377c5000 (fff) get Phys(data[n=11+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2ee96000 ph data[11]=0:2ee96000 (fff) get Phys(data[n=12+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2e4d7000 ph data[12]=0:2e4d7000 (fff) get Phys(data[n=13+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:2ee80000 ph data[13]=0:2ee80000 (fff) get Phys(data[n=14+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:2e4e9000 set TERM ph data[14]=0:2e4e9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d260, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 3960d260, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6bf2000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:2fa5a000 ph data[0]=0:2fa5a000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:2e403000 ph data[1]=0:2e403000 (fff) get Phys(data[n=2+1000]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:2fa0c000 set TERM ph data[2]=0:2fa0c000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf993c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961c200, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9964 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961c280, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf993c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961c300, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xf, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9914 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d260, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0x3, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622b80, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622b80, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:2e4ca000 ph data[0]=0:2e4ca000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:285bb000 ph data[1]=0:285bb000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2e4bc000 ph data[2]=0:2e4bc000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:377f5000 ph data[3]=0:377f5000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:2fa06000 ph data[4]=0:2fa06000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2b737000 ph data[5]=0:2b737000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2f9f8000 ph data[6]=0:2f9f8000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:286c9000 ph data[7]=0:286c9000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:2e4c2000 ph data[8]=0:2e4c2000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:285b3000 ph data[9]=0:285b3000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2e4b4000 ph data[10]=0:2e4b4000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:2e52d000 ph data[11]=0:2e52d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:2f9fe000 ph data[12]=0:2f9fe000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2e447000 ph data[13]=0:2e447000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:2f9f0000 ph data[14]=0:2f9f0000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:286c1000 set TERM ph data[15]=0:286c1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622c00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622c00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:2e4ba000 ph data[0]=0:2e4ba000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:285ab000 ph data[1]=0:285ab000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2e4ac000 ph data[2]=0:2e4ac000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2e4cd000 ph data[3]=0:2e4cd000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2f9f6000 ph data[4]=0:2f9f6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:2e3ff000 ph data[5]=0:2e3ff000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2f9e8000 ph data[6]=0:2f9e8000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:2c999000 ph data[7]=0:2c999000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:36a92000 ph data[8]=0:36a92000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2b71b000 ph data[9]=0:2b71b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:2ed74000 ph data[10]=0:2ed74000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2e4c5000 ph data[11]=0:2e4c5000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:2f9ee000 ph data[12]=0:2f9ee000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2e3f7000 ph data[13]=0:2e3f7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:2ee98000 ph data[14]=0:2ee98000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:2e409000 set TERM ph data[15]=0:2e409000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622c80, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622c80, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:2f9da000 ph data[0]=0:2f9da000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:2e45b000 ph data[1]=0:2e45b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:2fa5c000 ph data[2]=0:2fa5c000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2e4bd000 ph data[3]=0:2e4bd000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2f9e6000 ph data[4]=0:2f9e6000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:2e4df000 ph data[5]=0:2e4df000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2ee90000 ph data[6]=0:2ee90000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:2e4f9000 ph data[7]=0:2e4f9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:2eea2000 ph data[8]=0:2eea2000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:2e453000 ph data[9]=0:2e453000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:37814000 ph data[10]=0:37814000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:2e4b5000 ph data[11]=0:2e4b5000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:2f9de000 ph data[12]=0:2f9de000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:36a8f000 ph data[13]=0:36a8f000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38cb0000 ph data[14]=0:38cb0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:30721000 set TERM ph data[15]=0:30721000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622d00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622d00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:2ee9a000 ph data[0]=0:2ee9a000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:2e44b000 ph data[1]=0:2e44b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:36a94000 ph data[2]=0:36a94000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2e4ad000 ph data[3]=0:2e4ad000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:377fe000 ph data[4]=0:377fe000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:2f9e7000 ph data[5]=0:2f9e7000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:6fa18000 ph data[6]=0:6fa18000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:2e459000 ph data[7]=0:2e459000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2ee92000 ph data[8]=0:2ee92000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:36ab3000 ph data[9]=0:36ab3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2ee64000 ph data[10]=0:2ee64000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:2fa5d000 ph data[11]=0:2fa5d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:6fa1e000 ph data[12]=0:6fa1e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2f9df000 ph data[13]=0:2f9df000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:6fa10000 ph data[14]=0:6fa10000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:2e451000 set TERM ph data[15]=0:2e451000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622b80, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622c00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf988c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622c80, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5dfc0b8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5dfc0b8, CDB 0xb5dfc0e8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9964 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622d00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5dfc0b8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5dfc0b8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5dfc0b8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39623380, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39623380, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:360b2000 ph data[0]=0:360b2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:2fa53000 ph data[1]=0:2fa53000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2e404000 ph data[2]=0:2e404000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:377ed000 ph data[3]=0:377ed000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:6fa16000 ph data[4]=0:6fa16000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:360af000 ph data[5]=0:360af000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:37818000 ph data[6]=0:37818000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:2e449000 ph data[7]=0:2e449000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:360aa000 ph data[8]=0:360aa000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2fa0b000 ph data[9]=0:2fa0b000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:360b4000 ph data[10]=0:360b4000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:2ee65000 ph data[11]=0:2ee65000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:36a7e000 ph data[12]=0:36a7e000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:360a7000 ph data[13]=0:360a7000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:37810000 ph data[14]=0:37810000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:6fa21000 set TERM ph data[15]=0:6fa21000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39623380, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39623400, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39623400, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:36a82000 ph data[0]=0:36a82000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3604b000 ph data[1]=0:3604b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:360ac000 ph data[2]=0:360ac000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2ee5d000 ph data[3]=0:2ee5d000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:37836000 ph data[4]=0:37836000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:36a7f000 ph data[5]=0:36a7f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:38ca0000 ph data[6]=0:38ca0000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:6fa19000 ph data[7]=0:6fa19000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3782a000 ph data[8]=0:3782a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:360d3000 ph data[9]=0:360d3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:36a8c000 ph data[10]=0:36a8c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:36a85000 ph data[11]=0:36a85000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:37796000 ph data[12]=0:37796000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:388bf000 ph data[13]=0:388bf000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:388e8000 ph data[14]=0:388e8000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:30709000 set TERM ph data[15]=0:30709000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39623480, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39623480, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:2fa0a000 ph data[0]=0:2fa0a000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:360cb000 ph data[1]=0:360cb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:36a84000 ph data[2]=0:36a84000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:36a7d000 ph data[3]=0:36a7d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38c7e000 ph data[4]=0:38c7e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:38947000 ph data[5]=0:38947000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38a08000 ph data[6]=0:38a08000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:30719000 ph data[7]=0:30719000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:2fa02000 ph data[8]=0:2fa02000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:38d23000 ph data[9]=0:38d23000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:36a7c000 ph data[10]=0:36a7c000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:388b5000 ph data[11]=0:388b5000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3892e000 ph data[12]=0:3892e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:38aaf000 ph data[13]=0:38aaf000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38a00000 ph data[14]=0:38a00000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:36041000 set TERM ph data[15]=0:36041000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39623500, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39623500, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:2f9fa000 ph data[0]=0:2f9fa000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:388cb000 ph data[1]=0:388cb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:38d54000 ph data[2]=0:38d54000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:38c55000 ph data[3]=0:38c55000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:38a16000 ph data[4]=0:38a16000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:2e4a7000 ph data[5]=0:2e4a7000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:6fa48000 ph data[6]=0:6fa48000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:2e481000 ph data[7]=0:2e481000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2f9f2000 ph data[8]=0:2f9f2000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:38a43000 ph data[9]=0:38a43000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2ee8c000 ph data[10]=0:2ee8c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:38c4d000 ph data[11]=0:38c4d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2ee5e000 ph data[12]=0:2ee5e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2fa57000 ph data[13]=0:2fa57000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:6fa40000 ph data[14]=0:6fa40000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:2e479000 set TERM ph data[15]=0:2e479000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a14 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39623400, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39623480, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39623500, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622d80, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622d80, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:2f9e2000 ph data[0]=0:2f9e2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:2e4c3000 ph data[1]=0:2e4c3000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2ee84000 ph data[2]=0:2ee84000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:38a95000 ph data[3]=0:38a95000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:6fa46000 ph data[4]=0:6fa46000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2fa4f000 ph data[5]=0:2fa4f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:6fa38000 ph data[6]=0:6fa38000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:2e471000 ph data[7]=0:2e471000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:3609a000 ph data[8]=0:3609a000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2e4bb000 ph data[9]=0:2e4bb000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2ee7c000 ph data[10]=0:2ee7c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:2ee95000 ph data[11]=0:2ee95000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:6fa36000 ph data[12]=0:6fa36000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2fa07000 ph data[13]=0:2fa07000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:6fa30000 ph data[14]=0:6fa30000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:2e469000 set TERM ph data[15]=0:2e469000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622d80, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622e00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622e00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:377fa000 ph data[0]=0:377fa000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:2e4b3000 ph data[1]=0:2e4b3000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2ee74000 ph data[2]=0:2ee74000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2ee8d000 ph data[3]=0:2ee8d000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:6fa2e000 ph data[4]=0:6fa2e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:2f9ff000 ph data[5]=0:2f9ff000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:6fa28000 ph data[6]=0:6fa28000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:2e461000 ph data[7]=0:2e461000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:37802000 ph data[8]=0:37802000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2e4ab000 ph data[9]=0:2e4ab000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:2ee6c000 ph data[10]=0:2ee6c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2ee85000 ph data[11]=0:2ee85000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:6fa26000 ph data[12]=0:6fa26000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2f9f7000 ph data[13]=0:2f9f7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:6fa20000 ph data[14]=0:6fa20000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:2f9d1000 set TERM ph data[15]=0:2f9d1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622e00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622e80, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622e80, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:37822000 ph data[0]=0:37822000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:2fa5b000 ph data[1]=0:2fa5b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:36aa4000 ph data[2]=0:36aa4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2ee75000 ph data[3]=0:2ee75000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38c9e000 ph data[4]=0:38c9e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:37817000 ph data[5]=0:37817000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2e3f8000 ph data[6]=0:2e3f8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:360b1000 ph data[7]=0:360b1000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:38a5a000 ph data[8]=0:38a5a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3609b000 ph data[9]=0:3609b000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:36a9c000 ph data[10]=0:36a9c000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:2ee6d000 ph data[11]=0:2ee6d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:2e456000 ph data[12]=0:2e456000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3781f000 ph data[13]=0:3781f000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38d38000 ph data[14]=0:38d38000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:360b9000 set TERM ph data[15]=0:360b9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622e80, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622f00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622f00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:38b92000 ph data[0]=0:38b92000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:3781b000 ph data[1]=0:3781b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:37804000 ph data[2]=0:37804000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:377b5000 ph data[3]=0:377b5000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:38ca6000 ph data[4]=0:38ca6000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:38aa7000 ph data[5]=0:38aa7000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3f918000 ph data[6]=0:3f918000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:38929000 ph data[7]=0:38929000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:360a2000 ph data[8]=0:360a2000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:37823000 ph data[9]=0:37823000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:388b4000 ph data[10]=0:388b4000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:377bd000 ph data[11]=0:377bd000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:38a0e000 ph data[12]=0:38a0e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:3609f000 ph data[13]=0:3609f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:37808000 ph data[14]=0:37808000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:38c49000 set TERM ph data[15]=0:38c49000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622f00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4230, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4230, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3782e000 ph data[0]=0:3782e000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:36097000 set TERM ph data[1]=0:36097000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4230, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request (win32ss/user/ntuser/msgqueue.c:1271) err: MsqSendMessage timed out 2 Status 102 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961bd60, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3961bd60, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:360a3000 ph data[0]=0:360a3000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38cac000 set TERM ph data[1]=0:38cac000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961bd60, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4230, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4230, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:388d8000 ph data[0]=0:388d8000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38ca9000 set TERM ph data[1]=0:38ca9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4230, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961bd60, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3961bd60, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:388f8000 ph data[0]=0:388f8000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38d71000 set TERM ph data[1]=0:38d71000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961bd60, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961c180, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3961c180, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:38d30000 ph data[0]=0:38d30000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:2e441000 ph data[1]=0:2e441000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:647ca000 ph data[2]=0:647ca000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:65f7b000 ph data[3]=0:65f7b000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:647a4000 ph data[4]=0:647a4000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:36095000 ph data[5]=0:36095000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:38bae000 ph data[6]=0:38bae000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:3f8cf000 ph data[7]=0:3f8cf000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:64078000 ph data[8]=0:64078000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:66291000 ph data[9]=0:66291000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:647c2000 ph data[10]=0:647c2000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:65f73000 ph data[11]=0:65f73000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:6479c000 ph data[12]=0:6479c000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:647bd000 ph data[13]=0:647bd000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3f886000 ph data[14]=0:3f886000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3f8d7000 set TERM ph data[15]=0:3f8d7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961c180, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961c200, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3961c200, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:64070000 ph data[0]=0:64070000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:65fa9000 ph data[1]=0:65fa9000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:647ba000 ph data[2]=0:647ba000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:647db000 ph data[3]=0:647db000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:645fc000 ph data[4]=0:645fc000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:647b5000 ph data[5]=0:647b5000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:64226000 ph data[6]=0:64226000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:647bf000 ph data[7]=0:647bf000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:64068000 ph data[8]=0:64068000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:65fa1000 ph data[9]=0:65fa1000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:647b2000 ph data[10]=0:647b2000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:647d3000 ph data[11]=0:647d3000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:645f4000 ph data[12]=0:645f4000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:647ad000 ph data[13]=0:647ad000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:6421e000 ph data[14]=0:6421e000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:647b7000 set TERM ph data[15]=0:647b7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961c280, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3961c280, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:64060000 ph data[0]=0:64060000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:65f99000 ph data[1]=0:65f99000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:647aa000 ph data[2]=0:647aa000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:647cb000 ph data[3]=0:647cb000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:645ec000 ph data[4]=0:645ec000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:647a5000 ph data[5]=0:647a5000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:64216000 ph data[6]=0:64216000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:647af000 ph data[7]=0:647af000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:64058000 ph data[8]=0:64058000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:65f91000 ph data[9]=0:65f91000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:647a2000 ph data[10]=0:647a2000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:647c3000 ph data[11]=0:647c3000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:645e4000 ph data[12]=0:645e4000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:6479d000 ph data[13]=0:6479d000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:64076000 ph data[14]=0:64076000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:647a7000 set TERM ph data[15]=0:647a7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3961c300, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3961c300, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:64050000 ph data[0]=0:64050000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:65f89000 ph data[1]=0:65f89000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:645fa000 ph data[2]=0:645fa000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:647bb000 ph data[3]=0:647bb000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:645dc000 ph data[4]=0:645dc000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:645fd000 ph data[5]=0:645fd000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:6406e000 ph data[6]=0:6406e000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:6479f000 ph data[7]=0:6479f000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:64048000 ph data[8]=0:64048000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:65f81000 ph data[9]=0:65f81000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:645f2000 ph data[10]=0:645f2000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:647b3000 ph data[11]=0:647b3000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:645d4000 ph data[12]=0:645d4000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:645f5000 ph data[13]=0:645f5000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:64066000 ph data[14]=0:64066000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:645ff000 set TERM ph data[15]=0:645ff000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b691b0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961c200, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b691bc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961c280, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69294 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3961c300, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622b80, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622b80, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:645c9000 ph data[0]=0:645c9000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:6406a000 ph data[1]=0:6406a000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:64223000 ph data[2]=0:64223000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:6404c000 ph data[3]=0:6404c000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:6406d000 ph data[4]=0:6406d000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:63ae6000 ph data[5]=0:63ae6000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:6406f000 ph data[6]=0:6406f000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:63758000 ph data[7]=0:63758000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:645c1000 ph data[8]=0:645c1000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:64062000 ph data[9]=0:64062000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:6421b000 ph data[10]=0:6421b000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:64044000 ph data[11]=0:64044000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:64065000 ph data[12]=0:64065000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:63ade000 ph data[13]=0:63ade000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:64067000 ph data[14]=0:64067000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:63750000 set TERM ph data[15]=0:63750000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622b80, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622c00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622c00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:64251000 ph data[0]=0:64251000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:6405a000 ph data[1]=0:6405a000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:64213000 ph data[2]=0:64213000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:6403c000 ph data[3]=0:6403c000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:6405d000 ph data[4]=0:6405d000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:63ad6000 ph data[5]=0:63ad6000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:6405f000 ph data[6]=0:6405f000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:63748000 ph data[7]=0:63748000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:64249000 ph data[8]=0:64249000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:64052000 ph data[9]=0:64052000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:6407b000 ph data[10]=0:6407b000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:63ce4000 ph data[11]=0:63ce4000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:64055000 ph data[12]=0:64055000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:63ace000 ph data[13]=0:63ace000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:64057000 ph data[14]=0:64057000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:63740000 set TERM ph data[15]=0:63740000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622c80, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622c80, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:64241000 ph data[0]=0:64241000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:6404a000 ph data[1]=0:6404a000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:64073000 ph data[2]=0:64073000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:63cdc000 ph data[3]=0:63cdc000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:6404d000 ph data[4]=0:6404d000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:63ac6000 ph data[5]=0:63ac6000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:6404f000 ph data[6]=0:6404f000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:63738000 ph data[7]=0:63738000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:64239000 ph data[8]=0:64239000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:64042000 ph data[9]=0:64042000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:6406b000 ph data[10]=0:6406b000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:63cd4000 ph data[11]=0:63cd4000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:64045000 ph data[12]=0:64045000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:63756000 ph data[13]=0:63756000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:64047000 ph data[14]=0:64047000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:63730000 set TERM ph data[15]=0:63730000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622d00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622d00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:64231000 ph data[0]=0:64231000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:63ce2000 ph data[1]=0:63ce2000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:64063000 ph data[2]=0:64063000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:63ccc000 ph data[3]=0:63ccc000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:6403d000 ph data[4]=0:6403d000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:6374e000 ph data[5]=0:6374e000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:6403f000 ph data[6]=0:6403f000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:63728000 ph data[7]=0:63728000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:64229000 ph data[8]=0:64229000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:63cda000 ph data[9]=0:63cda000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:6405b000 ph data[10]=0:6405b000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:63cc4000 ph data[11]=0:63cc4000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:63ce5000 ph data[12]=0:63ce5000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:63746000 ph data[13]=0:63746000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:63ce7000 ph data[14]=0:63ce7000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:63720000 set TERM ph data[15]=0:63720000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622c00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf992c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622c80, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622d00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39623380, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39623380, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:64221000 ph data[0]=0:64221000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:63cd2000 ph data[1]=0:63cd2000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:64053000 ph data[2]=0:64053000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:63cbc000 ph data[3]=0:63cbc000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:63cdd000 ph data[4]=0:63cdd000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:6373e000 ph data[5]=0:6373e000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:63cdf000 ph data[6]=0:63cdf000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:63588000 ph data[7]=0:63588000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:64219000 ph data[8]=0:64219000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:63cca000 ph data[9]=0:63cca000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:6404b000 ph data[10]=0:6404b000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:63cb4000 ph data[11]=0:63cb4000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:63cd5000 ph data[12]=0:63cd5000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:63736000 ph data[13]=0:63736000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:63cd7000 ph data[14]=0:63cd7000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:63580000 set TERM ph data[15]=0:63580000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39623380, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39623400, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39623400, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:64071000 ph data[0]=0:64071000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:63cc2000 ph data[1]=0:63cc2000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:64043000 ph data[2]=0:64043000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:63cac000 ph data[3]=0:63cac000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:63ccd000 ph data[4]=0:63ccd000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:6372e000 ph data[5]=0:6372e000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:63ccf000 ph data[6]=0:63ccf000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:63578000 ph data[7]=0:63578000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:64069000 ph data[8]=0:64069000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:63cba000 ph data[9]=0:63cba000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:63ce3000 ph data[10]=0:63ce3000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:63afc000 ph data[11]=0:63afc000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:63cc5000 ph data[12]=0:63cc5000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:63726000 ph data[13]=0:63726000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:63cc7000 ph data[14]=0:63cc7000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:63570000 set TERM ph data[15]=0:63570000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39623480, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39623480, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:64061000 ph data[0]=0:64061000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:63cb2000 ph data[1]=0:63cb2000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:63cdb000 ph data[2]=0:63cdb000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:63af4000 ph data[3]=0:63af4000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:63cbd000 ph data[4]=0:63cbd000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:6371e000 ph data[5]=0:6371e000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:63cbf000 ph data[6]=0:63cbf000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:63568000 ph data[7]=0:63568000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:64059000 ph data[8]=0:64059000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:63caa000 ph data[9]=0:63caa000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:63cd3000 ph data[10]=0:63cd3000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:63aec000 ph data[11]=0:63aec000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:63cb5000 ph data[12]=0:63cb5000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:63586000 ph data[13]=0:63586000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:63cb7000 ph data[14]=0:63cb7000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:63560000 set TERM ph data[15]=0:63560000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39623500, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39623500, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:64051000 ph data[0]=0:64051000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:63afa000 ph data[1]=0:63afa000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:63ccb000 ph data[2]=0:63ccb000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:63ae4000 ph data[3]=0:63ae4000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:63cad000 ph data[4]=0:63cad000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:6357e000 ph data[5]=0:6357e000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:63caf000 ph data[6]=0:63caf000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:63558000 ph data[7]=0:63558000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:64049000 ph data[8]=0:64049000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:63af2000 ph data[9]=0:63af2000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:63cc3000 ph data[10]=0:63cc3000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:63adc000 ph data[11]=0:63adc000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:63afd000 ph data[12]=0:63afd000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:63576000 ph data[13]=0:63576000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:63aff000 ph data[14]=0:63aff000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:63550000 set TERM ph data[15]=0:63550000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf99b4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39623400, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39623480, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39623500, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622d80, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622d80, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:64041000 ph data[0]=0:64041000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:63aea000 ph data[1]=0:63aea000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:63cbb000 ph data[2]=0:63cbb000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:63ad4000 ph data[3]=0:63ad4000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:63af5000 ph data[4]=0:63af5000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:6356e000 ph data[5]=0:6356e000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:63af7000 ph data[6]=0:63af7000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:63208000 ph data[7]=0:63208000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:64039000 ph data[8]=0:64039000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:63ae2000 ph data[9]=0:63ae2000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:63cb3000 ph data[10]=0:63cb3000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:63acc000 ph data[11]=0:63acc000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:63aed000 ph data[12]=0:63aed000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:63566000 ph data[13]=0:63566000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:63aef000 ph data[14]=0:63aef000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:63200000 set TERM ph data[15]=0:63200000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622d80, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622e00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622e00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:63ce1000 ph data[0]=0:63ce1000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:63ada000 ph data[1]=0:63ada000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:63cab000 ph data[2]=0:63cab000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:63ac4000 ph data[3]=0:63ac4000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:63ae5000 ph data[4]=0:63ae5000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:6355e000 ph data[5]=0:6355e000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:63ae7000 ph data[6]=0:63ae7000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:631f8000 ph data[7]=0:631f8000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:63cd9000 ph data[8]=0:63cd9000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:63ad2000 ph data[9]=0:63ad2000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:63afb000 ph data[10]=0:63afb000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:63754000 ph data[11]=0:63754000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:63add000 ph data[12]=0:63add000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:63556000 ph data[13]=0:63556000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:63adf000 ph data[14]=0:63adf000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:631f0000 set TERM ph data[15]=0:631f0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622e80, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622e80, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:63cd1000 ph data[0]=0:63cd1000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:63aca000 ph data[1]=0:63aca000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:63af3000 ph data[2]=0:63af3000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:6374c000 ph data[3]=0:6374c000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:63ad5000 ph data[4]=0:63ad5000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:6354e000 ph data[5]=0:6354e000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:63ad7000 ph data[6]=0:63ad7000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:631e8000 ph data[7]=0:631e8000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:63cc9000 ph data[8]=0:63cc9000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:63ac2000 ph data[9]=0:63ac2000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:63aeb000 ph data[10]=0:63aeb000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:63744000 ph data[11]=0:63744000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:63acd000 ph data[12]=0:63acd000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:63206000 ph data[13]=0:63206000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:63acf000 ph data[14]=0:63acf000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:631e0000 set TERM ph data[15]=0:631e0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622e00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39622f00, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39622f00, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:63cc1000 ph data[0]=0:63cc1000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:63752000 ph data[1]=0:63752000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:63ae3000 ph data[2]=0:63ae3000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:6373c000 ph data[3]=0:6373c000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:63ac5000 ph data[4]=0:63ac5000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:631fe000 ph data[5]=0:631fe000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:63ac7000 ph data[6]=0:63ac7000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:631d8000 ph data[7]=0:631d8000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:63cb9000 ph data[8]=0:63cb9000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:6374a000 ph data[9]=0:6374a000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:63adb000 ph data[10]=0:63adb000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:63734000 ph data[11]=0:63734000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:63755000 ph data[12]=0:63755000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:631f6000 ph data[13]=0:631f6000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:63757000 ph data[14]=0:63757000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:631d0000 set TERM ph data[15]=0:631d0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622e80, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39622f00, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:63582000 ph data[0]=0:63582000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:63733000 set TERM ph data[1]=0:63733000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac360, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac360, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:6320a000 ph data[0]=0:6320a000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:63563000 set TERM ph data[1]=0:63563000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac360, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e2c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3965adf0, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 3965adf0, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:6253a000 set TERM ph data[0]=0:6253a000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3965adf0, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4230, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4230, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:6227a000 ph data[0]=0:6227a000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:6250b000 set TERM ph data[1]=0:6250b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4230, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 396bde00, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 396bde00, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bf2000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:60dda000 ph data[0]=0:60dda000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:62263000 set TERM ph data[1]=0:62263000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396bde00, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39717e90, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39717e90, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bf4000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:60db4000 ph data[0]=0:60db4000 (fff) get Phys(data[n=1+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:60dcd000 set TERM ph data[1]=0:60dcd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39717e90, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4230, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4230, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:60c2a000 ph data[0]=0:60c2a000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:60db3000 set TERM ph data[1]=0:60db3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4230, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 396bde00, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 396bde00, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bf2000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:60baa000 ph data[0]=0:60baa000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:60c0b000 set TERM ph data[1]=0:60c0b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396bde00, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39717e90, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39717e90, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bf4000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:60b9c000 ph data[0]=0:60b9c000 (fff) get Phys(data[n=1+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:60bad000 set TERM ph data[1]=0:60bad000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39717e90, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e650, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e650, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:60bd2000 ph data[0]=0:60bd2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:60b93000 ph data[1]=0:60b93000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:60bc4000 ph data[2]=0:60bc4000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:60bd5000 ph data[3]=0:60bd5000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:62216000 ph data[4]=0:62216000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:60bd7000 ph data[5]=0:60bd7000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:624e8000 ph data[6]=0:624e8000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:60c11000 ph data[7]=0:60c11000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:60bca000 ph data[8]=0:60bca000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:60b8b000 ph data[9]=0:60b8b000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:60bbc000 ph data[10]=0:60bbc000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:60bcd000 ph data[11]=0:60bcd000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:6220e000 ph data[12]=0:6220e000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:60bcf000 ph data[13]=0:60bcf000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:624e0000 ph data[14]=0:624e0000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:60c09000 set TERM ph data[15]=0:60c09000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e650, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e6d0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e6d0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:60bc2000 ph data[0]=0:60bc2000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:60beb000 ph data[1]=0:60beb000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:60bb4000 ph data[2]=0:60bb4000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:60bc5000 ph data[3]=0:60bc5000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:62206000 ph data[4]=0:62206000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:60bc7000 ph data[5]=0:60bc7000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:624d8000 ph data[6]=0:624d8000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:60c01000 ph data[7]=0:60c01000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:60bba000 ph data[8]=0:60bba000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:60be3000 ph data[9]=0:60be3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:60d8c000 ph data[10]=0:60d8c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:60bbd000 ph data[11]=0:60bbd000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:621fe000 ph data[12]=0:621fe000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:60bbf000 ph data[13]=0:60bbf000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:624d0000 ph data[14]=0:624d0000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:60bf9000 set TERM ph data[15]=0:60bf9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e750, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e750, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:60bb2000 ph data[0]=0:60bb2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:60bdb000 ph data[1]=0:60bdb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:60d84000 ph data[2]=0:60d84000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:60bb5000 ph data[3]=0:60bb5000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:624f6000 ph data[4]=0:624f6000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:60bb7000 ph data[5]=0:60bb7000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:624c8000 ph data[6]=0:624c8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:60ba9000 ph data[7]=0:60ba9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:60d9a000 ph data[8]=0:60d9a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:60bd3000 ph data[9]=0:60bd3000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:60d7c000 ph data[10]=0:60d7c000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:60d95000 ph data[11]=0:60d95000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:624ee000 ph data[12]=0:624ee000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:60d97000 ph data[13]=0:60d97000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:624c0000 ph data[14]=0:624c0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:60ba1000 set TERM ph data[15]=0:60ba1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e7d0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e7d0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:60d92000 ph data[0]=0:60d92000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:60bcb000 ph data[1]=0:60bcb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:60d74000 ph data[2]=0:60d74000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:60d8d000 ph data[3]=0:60d8d000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:624e6000 ph data[4]=0:624e6000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:60d8f000 ph data[5]=0:60d8f000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:624b8000 ph data[6]=0:624b8000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:60b99000 ph data[7]=0:60b99000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:60d8a000 ph data[8]=0:60d8a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:60bc3000 ph data[9]=0:60bc3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:60d6c000 ph data[10]=0:60d6c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:60d85000 ph data[11]=0:60d85000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:624de000 ph data[12]=0:624de000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:60d87000 ph data[13]=0:60d87000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:6dc70000 ph data[14]=0:6dc70000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:60b91000 set TERM ph data[15]=0:60b91000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e6d0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9960 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e750, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e7d0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e850, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e850, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:60d82000 ph data[0]=0:60d82000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:60bbb000 ph data[1]=0:60bbb000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:60d64000 ph data[2]=0:60d64000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:60d7d000 ph data[3]=0:60d7d000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:624d6000 ph data[4]=0:624d6000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:60d7f000 ph data[5]=0:60d7f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:00990000 ph data[6]=0:990000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:60b89000 ph data[7]=0:60b89000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:60d7a000 ph data[8]=0:60d7a000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:60bb3000 ph data[9]=0:60bb3000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:60d5c000 ph data[10]=0:60d5c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:60d75000 ph data[11]=0:60d75000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:624ce000 ph data[12]=0:624ce000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:60d77000 ph data[13]=0:60d77000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:00988000 ph data[14]=0:988000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:60bf1000 set TERM ph data[15]=0:60bf1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e850, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e8d0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e8d0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:60d72000 ph data[0]=0:60d72000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:60d93000 ph data[1]=0:60d93000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:60d54000 ph data[2]=0:60d54000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:60d6d000 ph data[3]=0:60d6d000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:624c6000 ph data[4]=0:624c6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:60d6f000 ph data[5]=0:60d6f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:00980000 ph data[6]=0:980000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:60be9000 ph data[7]=0:60be9000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:60d6a000 ph data[8]=0:60d6a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:60d8b000 ph data[9]=0:60d8b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:62234000 ph data[10]=0:62234000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:60d65000 ph data[11]=0:60d65000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:624be000 ph data[12]=0:624be000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:60d67000 ph data[13]=0:60d67000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:00978000 ph data[14]=0:978000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:60be1000 set TERM ph data[15]=0:60be1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e950, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e950, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:60d62000 ph data[0]=0:60d62000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:60d83000 ph data[1]=0:60d83000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:6222c000 ph data[2]=0:6222c000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:60d5d000 ph data[3]=0:60d5d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:624b6000 ph data[4]=0:624b6000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:60d5f000 ph data[5]=0:60d5f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:00710000 ph data[6]=0:710000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:60bd9000 ph data[7]=0:60bd9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:60d5a000 ph data[8]=0:60d5a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:60d7b000 ph data[9]=0:60d7b000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:62224000 ph data[10]=0:62224000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:60d55000 ph data[11]=0:60d55000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0098e000 ph data[12]=0:98e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:60d57000 ph data[13]=0:60d57000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:00708000 ph data[14]=0:708000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:60bd1000 set TERM ph data[15]=0:60bd1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e9d0, OrigWordsRequested 0x7200, DevSize 0x72 IdeReadWrite (REQ): Starting sector is 3970e9d0, Number of WORDS 0x7200, DevSize 0x72 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count e400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:6223a000 ph data[0]=0:6223a000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:60d73000 ph data[1]=0:60d73000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:6221c000 ph data[2]=0:6221c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:62235000 ph data[3]=0:62235000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:00986000 ph data[4]=0:986000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:62237000 ph data[5]=0:62237000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:00700000 ph data[6]=0:700000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:60bc9000 ph data[7]=0:60bc9000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:62232000 ph data[8]=0:62232000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:60d6b000 ph data[9]=0:60d6b000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:62214000 ph data[10]=0:62214000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:6222d000 ph data[11]=0:6222d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0097e000 ph data[12]=0:97e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:6222f000 ph data[13]=0:6222f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:006f8000 set TERM ph data[14]=0:6f8000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e8d0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf766567c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e950, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d460, OrigWordsRequested 0x5100, DevSize 0x51 IdeReadWrite (REQ): Starting sector is 3960d460, Number of WORDS 0x5100, DevSize 0x51 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bc6000, count a200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:6222a000 ph data[0]=0:6222a000 (fff) get Phys(data[n=1+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:60d63000 ph data[1]=0:60d63000 (fff) get Phys(data[n=2+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:6220c000 ph data[2]=0:6220c000 (fff) get Phys(data[n=3+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:62225000 ph data[3]=0:62225000 (fff) get Phys(data[n=4+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:0070e000 ph data[4]=0:70e000 (fff) get Phys(data[n=5+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:62227000 ph data[5]=0:62227000 (fff) get Phys(data[n=6+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:00590000 ph data[6]=0:590000 (fff) get Phys(data[n=7+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:60bb9000 ph data[7]=0:60bb9000 (fff) get Phys(data[n=8+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:62222000 ph data[8]=0:62222000 (fff) get Phys(data[n=9+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:60d5b000 ph data[9]=0:60d5b000 (fff) get Phys(data[n=10+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:62204000 set TERM ph data[10]=0:62204000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdb94 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e9d0, Count 0x72(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xf, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7200, WordsLeft 7200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e400, full size e400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf992c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d460, Count 0x51(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xb, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4230, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4230, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:00516000 ph data[0]=0:516000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:624df000 set TERM ph data[1]=0:624df000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5100, WordsLeft 5100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a200, full size a200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4230, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 396bde00, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 396bde00, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bf2000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:00306000 ph data[0]=0:306000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:0097f000 set TERM ph data[1]=0:97f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396bde00, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08688 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39717e90, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39717e90, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bf4000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:00c18000 ph data[0]=0:c18000 (fff) get Phys(data[n=1+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:62201000 set TERM ph data[1]=0:62201000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0855c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39717e90, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4230, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4230, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:00c16000 ph data[0]=0:c16000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:0050f000 set TERM ph data[1]=0:50f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4230, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 396bde00, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 396bde00, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bf2000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bf2000) AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:00bd6000 ph data[0]=0:bd6000 (fff) get Phys(data[n=1+1000]=f6bf3000) AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:00c3f000 set TERM ph data[1]=0:c3f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396bde00, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39717e90, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39717e90, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6bf4000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6bf4000) AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:00b98000 ph data[0]=0:b98000 (fff) get Phys(data[n=1+1000]=f6bf5000) AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:00709000 set TERM ph data[1]=0:709000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39717e90, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e650, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e650, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:00b96000 ph data[0]=0:b96000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:00bff000 ph data[1]=0:bff000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:00b58000 ph data[2]=0:b58000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:00399000 ph data[3]=0:399000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:00c32000 ph data[4]=0:c32000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:00c4b000 ph data[5]=0:c4b000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:00bfc000 ph data[6]=0:bfc000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00c1d000 ph data[7]=0:c1d000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:00b8e000 ph data[8]=0:b8e000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:00bf7000 ph data[9]=0:bf7000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:00b50000 ph data[10]=0:b50000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:00391000 ph data[11]=0:391000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:00c2a000 ph data[12]=0:c2a000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:00c43000 ph data[13]=0:c43000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:00bf4000 ph data[14]=0:bf4000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00c15000 set TERM ph data[15]=0:c15000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e650, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e6d0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e6d0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:00b86000 ph data[0]=0:b86000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00bef000 ph data[1]=0:bef000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00b48000 ph data[2]=0:b48000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:00089000 ph data[3]=0:89000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:00c22000 ph data[4]=0:c22000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:00c3b000 ph data[5]=0:c3b000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:00bec000 ph data[6]=0:bec000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:00c0d000 ph data[7]=0:c0d000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:00b7e000 ph data[8]=0:b7e000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00be7000 ph data[9]=0:be7000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:00b40000 ph data[10]=0:b40000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:00329000 ph data[11]=0:329000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:00c1a000 ph data[12]=0:c1a000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:00c33000 ph data[13]=0:c33000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:00be4000 ph data[14]=0:be4000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00c05000 set TERM ph data[15]=0:c05000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e750, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e750, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:00b76000 ph data[0]=0:b76000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:00bdf000 ph data[1]=0:bdf000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:00b38000 ph data[2]=0:b38000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:00321000 ph data[3]=0:321000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:00c12000 ph data[4]=0:c12000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:00c2b000 ph data[5]=0:c2b000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:00bdc000 ph data[6]=0:bdc000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00bfd000 ph data[7]=0:bfd000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:00b6e000 ph data[8]=0:b6e000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:00bd7000 ph data[9]=0:bd7000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:00b30000 ph data[10]=0:b30000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:00319000 ph data[11]=0:319000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:00c0a000 ph data[12]=0:c0a000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:00c23000 ph data[13]=0:c23000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:00bd4000 ph data[14]=0:bd4000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00bf5000 set TERM ph data[15]=0:bf5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ad4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e6d0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e7d0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e7d0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:00b66000 ph data[0]=0:b66000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:00bcf000 ph data[1]=0:bcf000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:00b28000 ph data[2]=0:b28000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:00c49000 ph data[3]=0:c49000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:00c02000 ph data[4]=0:c02000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:00c1b000 ph data[5]=0:c1b000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:00bcc000 ph data[6]=0:bcc000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:00bed000 ph data[7]=0:bed000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:00b5e000 ph data[8]=0:b5e000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:00bc7000 ph data[9]=0:bc7000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:00b20000 ph data[10]=0:b20000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:00c41000 ph data[11]=0:c41000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:00bfa000 ph data[12]=0:bfa000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:00c13000 ph data[13]=0:c13000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:00bc4000 ph data[14]=0:bc4000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:00be5000 set TERM ph data[15]=0:be5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ad4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e750, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98cc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e7d0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e850, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e850, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:00b56000 ph data[0]=0:b56000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:00bbf000 ph data[1]=0:bbf000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:00b18000 ph data[2]=0:b18000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:00c39000 ph data[3]=0:c39000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:00bf2000 ph data[4]=0:bf2000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:00c0b000 ph data[5]=0:c0b000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:00bbc000 ph data[6]=0:bbc000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00bdd000 ph data[7]=0:bdd000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:00b4e000 ph data[8]=0:b4e000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:00bb7000 ph data[9]=0:bb7000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:00b10000 ph data[10]=0:b10000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:00c31000 ph data[11]=0:c31000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:00bea000 ph data[12]=0:bea000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:00c03000 ph data[13]=0:c03000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:00bb4000 ph data[14]=0:bb4000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00bd5000 set TERM ph data[15]=0:bd5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e850, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e8d0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e8d0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:00b46000 ph data[0]=0:b46000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00baf000 ph data[1]=0:baf000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00b08000 ph data[2]=0:b08000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:00c29000 ph data[3]=0:c29000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:00be2000 ph data[4]=0:be2000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:00bfb000 ph data[5]=0:bfb000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:00bac000 ph data[6]=0:bac000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:00bcd000 ph data[7]=0:bcd000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:00b3e000 ph data[8]=0:b3e000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00ba7000 ph data[9]=0:ba7000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:00b00000 ph data[10]=0:b00000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:00c21000 ph data[11]=0:c21000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:00bda000 ph data[12]=0:bda000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:00bf3000 ph data[13]=0:bf3000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:00ba4000 ph data[14]=0:ba4000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00bc5000 set TERM ph data[15]=0:bc5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e950, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3970e950, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:00b36000 ph data[0]=0:b36000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:00b9f000 ph data[1]=0:b9f000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:00af8000 ph data[2]=0:af8000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:00c19000 ph data[3]=0:c19000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:00bd2000 ph data[4]=0:bd2000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:00beb000 ph data[5]=0:beb000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:00b9c000 ph data[6]=0:b9c000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00bbd000 ph data[7]=0:bbd000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:00b2e000 ph data[8]=0:b2e000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:00b97000 ph data[9]=0:b97000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:00af0000 ph data[10]=0:af0000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:00c11000 ph data[11]=0:c11000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:00bca000 ph data[12]=0:bca000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:00be3000 ph data[13]=0:be3000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:00b94000 ph data[14]=0:b94000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00bb5000 set TERM ph data[15]=0:bb5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e8d0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3970e9d0, OrigWordsRequested 0x7200, DevSize 0x72 IdeReadWrite (REQ): Starting sector is 3970e9d0, Number of WORDS 0x7200, DevSize 0x72 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count e400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:00b26000 ph data[0]=0:b26000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:00b8f000 ph data[1]=0:b8f000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:00ae8000 ph data[2]=0:ae8000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:00c09000 ph data[3]=0:c09000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:00bc2000 ph data[4]=0:bc2000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:00bdb000 ph data[5]=0:bdb000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:00b8c000 ph data[6]=0:b8c000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:00bad000 ph data[7]=0:bad000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:00b1e000 ph data[8]=0:b1e000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:00b87000 ph data[9]=0:b87000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:00ae0000 ph data[10]=0:ae0000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:00c01000 ph data[11]=0:c01000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:00bba000 ph data[12]=0:bba000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:00bd3000 ph data[13]=0:bd3000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:00b84000 set TERM ph data[14]=0:b84000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e950, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3970e9d0, Count 0x72(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7200, WordsLeft 7200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e400, full size e400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e2c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38facc10, OrigWordsRequested 0x300, DevSize 0x3 IdeReadWrite (REQ): Starting sector is 38facc10, Number of WORDS 0x300, DevSize 0x3 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:00ae6000 set TERM ph data[0]=0:ae6000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38facc10, Count 0x3(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 300, WordsLeft 300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 600, full size 600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0cb0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0cb0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:00aa6000 ph data[0]=0:aa6000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:00b0f000 ph data[1]=0:b0f000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:00a68000 ph data[2]=0:a68000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:00b89000 ph data[3]=0:b89000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:00b42000 ph data[4]=0:b42000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:00b5b000 ph data[5]=0:b5b000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:00b04000 ph data[6]=0:b04000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00b25000 ph data[7]=0:b25000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:00a9e000 ph data[8]=0:a9e000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:00b07000 ph data[9]=0:b07000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:00a60000 ph data[10]=0:a60000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:00b81000 ph data[11]=0:b81000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:00b3a000 ph data[12]=0:b3a000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:00b53000 ph data[13]=0:b53000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:00afc000 ph data[14]=0:afc000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00b1d000 set TERM ph data[15]=0:b1d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0cb0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0d30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0d30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:00a96000 ph data[0]=0:a96000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00aff000 ph data[1]=0:aff000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00a58000 ph data[2]=0:a58000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:00b79000 ph data[3]=0:b79000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:00b32000 ph data[4]=0:b32000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:00b4b000 ph data[5]=0:b4b000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:00af4000 ph data[6]=0:af4000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:00b15000 ph data[7]=0:b15000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:00a8e000 ph data[8]=0:a8e000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00af7000 ph data[9]=0:af7000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:00a50000 ph data[10]=0:a50000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:00b71000 ph data[11]=0:b71000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:00b2a000 ph data[12]=0:b2a000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:00b43000 ph data[13]=0:b43000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:00aec000 ph data[14]=0:aec000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00b0d000 set TERM ph data[15]=0:b0d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0db0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0db0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:00a86000 ph data[0]=0:a86000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:00aef000 ph data[1]=0:aef000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:00a48000 ph data[2]=0:a48000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:00b69000 ph data[3]=0:b69000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:00b22000 ph data[4]=0:b22000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:00b3b000 ph data[5]=0:b3b000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:00ae4000 ph data[6]=0:ae4000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00b05000 ph data[7]=0:b05000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:00a7e000 ph data[8]=0:a7e000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:00ae7000 ph data[9]=0:ae7000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:00a40000 ph data[10]=0:a40000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:00b61000 ph data[11]=0:b61000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:00b1a000 ph data[12]=0:b1a000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:00b33000 ph data[13]=0:b33000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:00adc000 ph data[14]=0:adc000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00afd000 set TERM ph data[15]=0:afd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0e30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0e30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:00a76000 ph data[0]=0:a76000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:00adf000 ph data[1]=0:adf000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:00a38000 ph data[2]=0:a38000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:00b59000 ph data[3]=0:b59000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:00b12000 ph data[4]=0:b12000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:00b2b000 ph data[5]=0:b2b000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:00ad4000 ph data[6]=0:ad4000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:00af5000 ph data[7]=0:af5000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:00a6e000 ph data[8]=0:a6e000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:00ad7000 ph data[9]=0:ad7000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:02f08000 ph data[10]=0:2f08000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:00b51000 ph data[11]=0:b51000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:00b0a000 ph data[12]=0:b0a000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:00b23000 ph data[13]=0:b23000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:00acc000 ph data[14]=0:acc000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:00aed000 set TERM ph data[15]=0:aed000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0d30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9964 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0db0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0e30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc14b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc14b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:00a5e000 ph data[0]=0:a5e000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:00acf000 ph data[1]=0:acf000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:02f10000 ph data[2]=0:2f10000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:00b49000 ph data[3]=0:b49000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:00b02000 ph data[4]=0:b02000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:00b1b000 ph data[5]=0:b1b000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:00ac4000 ph data[6]=0:ac4000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00ae5000 ph data[7]=0:ae5000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:00a56000 ph data[8]=0:a56000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:00ac7000 ph data[9]=0:ac7000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:02f18000 ph data[10]=0:2f18000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:00b41000 ph data[11]=0:b41000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:00afa000 ph data[12]=0:afa000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:00b13000 ph data[13]=0:b13000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:00abc000 ph data[14]=0:abc000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00add000 set TERM ph data[15]=0:add000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc14b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc1530, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc1530, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:00a4e000 ph data[0]=0:a4e000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00abf000 ph data[1]=0:abf000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:02f20000 ph data[2]=0:2f20000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:00b39000 ph data[3]=0:b39000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:00af2000 ph data[4]=0:af2000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:00b0b000 ph data[5]=0:b0b000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:00ab4000 ph data[6]=0:ab4000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:00ad5000 ph data[7]=0:ad5000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:00a46000 ph data[8]=0:a46000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00ab7000 ph data[9]=0:ab7000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:02f28000 ph data[10]=0:2f28000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:00b31000 ph data[11]=0:b31000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:00aea000 ph data[12]=0:aea000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:00b03000 ph data[13]=0:b03000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:00aac000 ph data[14]=0:aac000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00acd000 set TERM ph data[15]=0:acd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc15b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc15b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:00a3e000 ph data[0]=0:a3e000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:00aaf000 ph data[1]=0:aaf000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:02f30000 ph data[2]=0:2f30000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:00b29000 ph data[3]=0:b29000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:00ae2000 ph data[4]=0:ae2000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:00afb000 ph data[5]=0:afb000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:00aa4000 ph data[6]=0:aa4000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00ac5000 ph data[7]=0:ac5000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:00a36000 ph data[8]=0:a36000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:00aa7000 ph data[9]=0:aa7000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:02f38000 ph data[10]=0:2f38000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:00b21000 ph data[11]=0:b21000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:00ada000 ph data[12]=0:ada000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:00af3000 ph data[13]=0:af3000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:00a9c000 ph data[14]=0:a9c000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00abd000 set TERM ph data[15]=0:abd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc1630, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc1630, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:02f2e000 ph data[0]=0:2f2e000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:00a9f000 ph data[1]=0:a9f000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:02f40000 ph data[2]=0:2f40000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:00b19000 ph data[3]=0:b19000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:00ad2000 ph data[4]=0:ad2000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:00aeb000 ph data[5]=0:aeb000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:00a94000 ph data[6]=0:a94000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:00ab5000 ph data[7]=0:ab5000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:02f36000 ph data[8]=0:2f36000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:00a97000 ph data[9]=0:a97000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01878000 ph data[10]=0:1878000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:00b11000 ph data[11]=0:b11000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:00aca000 ph data[12]=0:aca000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:00ae3000 ph data[13]=0:ae3000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:00a8c000 ph data[14]=0:a8c000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:00aad000 set TERM ph data[15]=0:aad000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc1530, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc15b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc1630, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0cb0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0cb0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:00ac2000 ph data[0]=0:ac2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:00adb000 ph data[1]=0:adb000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:00a84000 ph data[2]=0:a84000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:00aa5000 ph data[3]=0:aa5000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02f3e000 ph data[4]=0:2f3e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:00a87000 ph data[5]=0:a87000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01888000 ph data[6]=0:1888000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00b01000 ph data[7]=0:b01000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:00aba000 ph data[8]=0:aba000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:00ad3000 ph data[9]=0:ad3000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:00a7c000 ph data[10]=0:a7c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:00a9d000 ph data[11]=0:a9d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:02f46000 ph data[12]=0:2f46000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:00a7f000 ph data[13]=0:a7f000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01890000 ph data[14]=0:1890000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00af9000 set TERM ph data[15]=0:af9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0cb0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0d30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0d30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:00ab2000 ph data[0]=0:ab2000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00acb000 ph data[1]=0:acb000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00a74000 ph data[2]=0:a74000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:00a95000 ph data[3]=0:a95000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02f4e000 ph data[4]=0:2f4e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:00a77000 ph data[5]=0:a77000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01898000 ph data[6]=0:1898000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:00af1000 ph data[7]=0:af1000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:00aaa000 ph data[8]=0:aaa000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00ac3000 ph data[9]=0:ac3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:00a6c000 ph data[10]=0:a6c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:00a8d000 ph data[11]=0:a8d000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:02f56000 ph data[12]=0:2f56000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:00a6f000 ph data[13]=0:a6f000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:018a0000 ph data[14]=0:18a0000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00ae9000 set TERM ph data[15]=0:ae9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ac4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0d30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0db0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0db0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:00aa2000 ph data[0]=0:aa2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:00abb000 ph data[1]=0:abb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:00a64000 ph data[2]=0:a64000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:00a85000 ph data[3]=0:a85000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:02f5e000 ph data[4]=0:2f5e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:00a67000 ph data[5]=0:a67000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:018a8000 ph data[6]=0:18a8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00ae1000 ph data[7]=0:ae1000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:00a9a000 ph data[8]=0:a9a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:00ab3000 ph data[9]=0:ab3000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:00a5c000 ph data[10]=0:a5c000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:00a7d000 ph data[11]=0:a7d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:02f66000 ph data[12]=0:2f66000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:00a5f000 ph data[13]=0:a5f000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:018b0000 ph data[14]=0:18b0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00ad9000 set TERM ph data[15]=0:ad9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0db0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc0e30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc0e30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:00a92000 ph data[0]=0:a92000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:00aab000 ph data[1]=0:aab000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:00a54000 ph data[2]=0:a54000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:00a75000 ph data[3]=0:a75000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0189e000 ph data[4]=0:189e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:00a57000 ph data[5]=0:a57000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:03530000 ph data[6]=0:3530000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:00ad1000 ph data[7]=0:ad1000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:00a8a000 ph data[8]=0:a8a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:00aa3000 ph data[9]=0:aa3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:00a4c000 ph data[10]=0:a4c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:00a6d000 ph data[11]=0:a6d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:018a6000 ph data[12]=0:18a6000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:00a4f000 ph data[13]=0:a4f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:03638000 ph data[14]=0:3638000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:00ac9000 set TERM ph data[15]=0:ac9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ad4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc0e30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc14b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc14b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:00a7a000 ph data[0]=0:a7a000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:00a9b000 ph data[1]=0:a9b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:00a44000 ph data[2]=0:a44000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:00a65000 ph data[3]=0:a65000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:018ae000 ph data[4]=0:18ae000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:00a47000 ph data[5]=0:a47000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:03740000 ph data[6]=0:3740000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00ac1000 ph data[7]=0:ac1000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:00a72000 ph data[8]=0:a72000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:00a93000 ph data[9]=0:a93000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:00a3c000 ph data[10]=0:a3c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:00a5d000 ph data[11]=0:a5d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:018b6000 ph data[12]=0:18b6000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:00a3f000 ph data[13]=0:a3f000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:03888000 ph data[14]=0:3888000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00ab9000 set TERM ph data[15]=0:ab9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc14b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc1530, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc1530, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:00a6a000 ph data[0]=0:a6a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00a8b000 ph data[1]=0:a8b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00a34000 ph data[2]=0:a34000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:00a55000 ph data[3]=0:a55000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:018be000 ph data[4]=0:18be000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:00a37000 ph data[5]=0:a37000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:011d0000 ph data[6]=0:11d0000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:00ab1000 ph data[7]=0:ab1000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:00a62000 ph data[8]=0:a62000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00a83000 ph data[9]=0:a83000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0225c000 ph data[10]=0:225c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:00a4d000 ph data[11]=0:a4d000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:018c6000 ph data[12]=0:18c6000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:02f37000 ph data[13]=0:2f37000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01418000 ph data[14]=0:1418000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00aa9000 set TERM ph data[15]=0:aa9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc1530, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc15b0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc15b0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:00a5a000 ph data[0]=0:a5a000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:00a7b000 ph data[1]=0:a7b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:02f2c000 ph data[2]=0:2f2c000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:00a45000 ph data[3]=0:a45000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:018ce000 ph data[4]=0:18ce000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02f3f000 ph data[5]=0:2f3f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01560000 ph data[6]=0:1560000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00aa1000 ph data[7]=0:aa1000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:00a52000 ph data[8]=0:a52000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:00a73000 ph data[9]=0:a73000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:02f34000 ph data[10]=0:2f34000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:00a3d000 ph data[11]=0:a3d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:018d6000 ph data[12]=0:18d6000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:02f47000 ph data[13]=0:2f47000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01728000 ph data[14]=0:1728000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00a99000 set TERM ph data[15]=0:a99000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ed4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc15b0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc1630, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc1630, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:00a4a000 ph data[0]=0:a4a000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:00a6b000 ph data[1]=0:a6b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:02f3c000 ph data[2]=0:2f3c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:00a35000 ph data[3]=0:a35000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:03596000 ph data[4]=0:3596000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02f4f000 ph data[5]=0:2f4f000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:018b8000 ph data[6]=0:18b8000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:00a91000 ph data[7]=0:a91000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:00a42000 ph data[8]=0:a42000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:00a63000 ph data[9]=0:a63000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:02f44000 ph data[10]=0:2f44000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0225d000 ph data[11]=0:225d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0369e000 ph data[12]=0:369e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:02f57000 ph data[13]=0:2f57000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:018c0000 ph data[14]=0:18c0000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:00a89000 set TERM ph data[15]=0:a89000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc1630, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e2c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38facc20, OrigWordsRequested 0x300, DevSize 0x3 IdeReadWrite (REQ): Starting sector is 38facc20, Number of WORDS 0x300, DevSize 0x3 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:02f4a000 set TERM ph data[0]=0:2f4a000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38facc20, Count 0x3(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 300, WordsLeft 300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 600, full size 600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe3e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe3e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:018ba000 ph data[0]=0:18ba000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0189b000 ph data[1]=0:189b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:039e4000 ph data[2]=0:39e4000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:018c5000 ph data[3]=0:18c5000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01916000 ph data[4]=0:1916000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:010b7000 ph data[5]=0:10b7000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01da0000 ph data[6]=0:1da0000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:02f39000 ph data[7]=0:2f39000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:018c2000 ph data[8]=0:18c2000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:018a3000 ph data[9]=0:18a3000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:010ec000 ph data[10]=0:10ec000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:018cd000 ph data[11]=0:18cd000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01d96000 ph data[12]=0:1d96000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0123f000 ph data[13]=0:123f000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01da8000 ph data[14]=0:1da8000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:02f41000 set TERM ph data[15]=0:2f41000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe3e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:018ca000 ph data[0]=0:18ca000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:018ab000 ph data[1]=0:18ab000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01334000 ph data[2]=0:1334000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:035cd000 ph data[3]=0:35cd000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01d86000 ph data[4]=0:1d86000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01487000 ph data[5]=0:1487000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01a00000 ph data[6]=0:1a00000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:02f49000 ph data[7]=0:2f49000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0360a000 ph data[8]=0:360a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:018b3000 ph data[9]=0:18b3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:014bc000 ph data[10]=0:14bc000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:03695000 ph data[11]=0:3695000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01c76000 ph data[12]=0:1c76000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0158f000 ph data[13]=0:158f000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:02c00000 ph data[14]=0:2c00000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02f51000 set TERM ph data[15]=0:2f51000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe4e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe4e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:03712000 ph data[0]=0:3712000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:018bb000 ph data[1]=0:18bb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01684000 ph data[2]=0:1684000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0379d000 ph data[3]=0:379d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01d7e000 ph data[4]=0:1d7e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:01757000 ph data[5]=0:1757000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02c08000 ph data[6]=0:2c08000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:01889000 ph data[7]=0:1889000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0385a000 ph data[8]=0:385a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:018c3000 ph data[9]=0:18c3000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:017cc000 ph data[10]=0:17cc000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:03925000 ph data[11]=0:3925000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01d9e000 ph data[12]=0:1d9e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:018e7000 ph data[13]=0:18e7000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02c10000 ph data[14]=0:2c10000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:01891000 set TERM ph data[15]=0:1891000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01022000 ph data[0]=0:1022000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:018cb000 ph data[1]=0:18cb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:018d4000 ph data[2]=0:18d4000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:010ed000 ph data[3]=0:10ed000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01da6000 ph data[4]=0:1da6000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:018ef000 ph data[5]=0:18ef000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:02c18000 ph data[6]=0:2c18000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01899000 ph data[7]=0:1899000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0116a000 ph data[8]=0:116a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0360b000 ph data[9]=0:360b000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:018dc000 ph data[10]=0:18dc000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01335000 ph data[11]=0:1335000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01dae000 ph data[12]=0:1dae000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:018f7000 ph data[13]=0:18f7000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02c20000 ph data[14]=0:2c20000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:018a1000 set TERM ph data[15]=0:18a1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe460, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe4e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9964 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe560, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe5e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe5e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:013b2000 ph data[0]=0:13b2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:036d3000 ph data[1]=0:36d3000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:018e4000 ph data[2]=0:18e4000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01605000 ph data[3]=0:1605000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01db6000 ph data[4]=0:1db6000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:018ff000 ph data[5]=0:18ff000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:02c28000 ph data[6]=0:2c28000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:018a9000 ph data[7]=0:18a9000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:014fa000 ph data[8]=0:14fa000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:037db000 ph data[9]=0:37db000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:018ec000 ph data[10]=0:18ec000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0178d000 ph data[11]=0:178d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01dbe000 ph data[12]=0:1dbe000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01907000 ph data[13]=0:1907000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:02c30000 ph data[14]=0:2c30000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:018b1000 set TERM ph data[15]=0:18b1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe5e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:016c2000 ph data[0]=0:16c2000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:039e3000 ph data[1]=0:39e3000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:018f4000 ph data[2]=0:18f4000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:018d5000 ph data[3]=0:18d5000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01dc6000 ph data[4]=0:1dc6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0190f000 ph data[5]=0:190f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:02c38000 ph data[6]=0:2c38000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:018b9000 ph data[7]=0:18b9000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0180a000 ph data[8]=0:180a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0116b000 ph data[9]=0:116b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:018fc000 ph data[10]=0:18fc000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:018dd000 ph data[11]=0:18dd000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01dce000 ph data[12]=0:1dce000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01917000 ph data[13]=0:1917000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01d60000 ph data[14]=0:1d60000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:018c1000 set TERM ph data[15]=0:18c1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:018d2000 ph data[0]=0:18d2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:013b3000 ph data[1]=0:13b3000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01904000 ph data[2]=0:1904000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:018e5000 ph data[3]=0:18e5000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01dd6000 ph data[4]=0:1dd6000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0191f000 ph data[5]=0:191f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01938000 ph data[6]=0:1938000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:03541000 ph data[7]=0:3541000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:018da000 ph data[8]=0:18da000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:014bb000 ph data[9]=0:14bb000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0190c000 ph data[10]=0:190c000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:018ed000 ph data[11]=0:18ed000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0191e000 ph data[12]=0:191e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01d97000 ph data[13]=0:1d97000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01940000 ph data[14]=0:1940000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:03649000 set TERM ph data[15]=0:3649000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:018e2000 ph data[0]=0:18e2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01683000 ph data[1]=0:1683000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01d7c000 ph data[2]=0:1d7c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:018f5000 ph data[3]=0:18f5000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:02c2e000 ph data[4]=0:2c2e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:01d87000 ph data[5]=0:1d87000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01948000 ph data[6]=0:1948000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:03711000 ph data[7]=0:3711000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:018ea000 ph data[8]=0:18ea000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:017cb000 ph data[9]=0:17cb000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01d6c000 ph data[10]=0:1d6c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:018fd000 ph data[11]=0:18fd000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:02c36000 ph data[12]=0:2c36000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:01c77000 ph data[13]=0:1c77000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01950000 ph data[14]=0:1950000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:03859000 set TERM ph data[15]=0:3859000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe660, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe6e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe760, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe7e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe7e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:018f2000 ph data[0]=0:18f2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:018d3000 ph data[1]=0:18d3000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01d74000 ph data[2]=0:1d74000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01905000 ph data[3]=0:1905000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02c3e000 ph data[4]=0:2c3e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01d9f000 ph data[5]=0:1d9f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01980000 ph data[6]=0:1980000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:01019000 ph data[7]=0:1019000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:018fa000 ph data[8]=0:18fa000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:018db000 ph data[9]=0:18db000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01d8c000 ph data[10]=0:1d8c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0190d000 ph data[11]=0:190d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:02c46000 ph data[12]=0:2c46000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01da7000 ph data[13]=0:1da7000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01988000 ph data[14]=0:1988000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:011e1000 set TERM ph data[15]=0:11e1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe7e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01902000 ph data[0]=0:1902000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:018e3000 ph data[1]=0:18e3000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01d94000 ph data[2]=0:1d94000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:01d7d000 ph data[3]=0:1d7d000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02c4e000 ph data[4]=0:2c4e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01daf000 ph data[5]=0:1daf000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01990000 ph data[6]=0:1990000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:01429000 ph data[7]=0:1429000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0190a000 ph data[8]=0:190a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:018eb000 ph data[9]=0:18eb000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01d9c000 ph data[10]=0:1d9c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01cad000 ph data[11]=0:1cad000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:02c56000 ph data[12]=0:2c56000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01db7000 ph data[13]=0:1db7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01998000 ph data[14]=0:1998000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:014f1000 set TERM ph data[15]=0:14f1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01d7a000 ph data[0]=0:1d7a000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:018f3000 ph data[1]=0:18f3000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01da4000 ph data[2]=0:1da4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:01d8d000 ph data[3]=0:1d8d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:02c5e000 ph data[4]=0:2c5e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:01dbf000 ph data[5]=0:1dbf000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:019a0000 ph data[6]=0:19a0000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:016b9000 ph data[7]=0:16b9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01d6a000 ph data[8]=0:1d6a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:018fb000 ph data[9]=0:18fb000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01dac000 ph data[10]=0:1dac000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01d95000 ph data[11]=0:1d95000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:02c66000 ph data[12]=0:2c66000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01dc7000 ph data[13]=0:1dc7000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:019a8000 ph data[14]=0:19a8000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:01801000 set TERM ph data[15]=0:1801000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01d72000 ph data[0]=0:1d72000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01903000 ph data[1]=0:1903000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01db4000 ph data[2]=0:1db4000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01d9d000 ph data[3]=0:1d9d000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01966000 ph data[4]=0:1966000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:01dcf000 ph data[5]=0:1dcf000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:019b0000 ph data[6]=0:19b0000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:018c9000 ph data[7]=0:18c9000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01d82000 ph data[8]=0:1d82000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0190b000 ph data[9]=0:190b000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01dbc000 ph data[10]=0:1dbc000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01da5000 ph data[11]=0:1da5000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0196e000 ph data[12]=0:196e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:01dd7000 ph data[13]=0:1dd7000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:019b8000 ph data[14]=0:19b8000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:018d1000 set TERM ph data[15]=0:18d1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe860, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe8e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe960, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe3e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe3e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0197e000 ph data[0]=0:197e000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:01a2f000 ph data[1]=0:1a2f000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:018f8000 ph data[2]=0:18f8000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:018d9000 ph data[3]=0:18d9000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01d8a000 ph data[4]=0:1d8a000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01d6b000 ph data[5]=0:1d6b000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01dc4000 ph data[6]=0:1dc4000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:01db5000 ph data[7]=0:1db5000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:019ae000 ph data[8]=0:19ae000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:01d8f000 ph data[9]=0:1d8f000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01900000 ph data[10]=0:1900000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:018e1000 ph data[11]=0:18e1000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01d92000 ph data[12]=0:1d92000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01d83000 ph data[13]=0:1d83000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01a24000 ph data[14]=0:1a24000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:01dbd000 set TERM ph data[15]=0:1dbd000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe3e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:019b6000 ph data[0]=0:19b6000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:02c2f000 ph data[1]=0:2c2f000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01908000 ph data[2]=0:1908000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:018e9000 ph data[3]=0:18e9000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01d9a000 ph data[4]=0:1d9a000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01d8b000 ph data[5]=0:1d8b000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:019dc000 ph data[6]=0:19dc000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:01dc5000 ph data[7]=0:1dc5000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:019be000 ph data[8]=0:19be000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:02c37000 ph data[9]=0:2c37000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01910000 ph data[10]=0:1910000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:018f1000 ph data[11]=0:18f1000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01da2000 ph data[12]=0:1da2000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01d93000 ph data[13]=0:1d93000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:02c2c000 ph data[14]=0:2c2c000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:01915000 set TERM ph data[15]=0:1915000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe4e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe4e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:019c6000 ph data[0]=0:19c6000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02c3f000 ph data[1]=0:2c3f000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01918000 ph data[2]=0:1918000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:018f9000 ph data[3]=0:18f9000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01daa000 ph data[4]=0:1daa000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:01d9b000 ph data[5]=0:1d9b000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02c34000 ph data[6]=0:2c34000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:019dd000 ph data[7]=0:19dd000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:019ce000 ph data[8]=0:19ce000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:02c47000 ph data[9]=0:2c47000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01920000 ph data[10]=0:1920000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01901000 ph data[11]=0:1901000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01db2000 ph data[12]=0:1db2000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01da3000 ph data[13]=0:1da3000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02c3c000 ph data[14]=0:2c3c000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02c2d000 set TERM ph data[15]=0:2c2d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ab4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe460, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c00 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:019d6000 ph data[0]=0:19d6000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:02c4f000 ph data[1]=0:2c4f000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01928000 ph data[2]=0:1928000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01d79000 ph data[3]=0:1d79000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01dba000 ph data[4]=0:1dba000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:01dab000 ph data[5]=0:1dab000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:02c44000 ph data[6]=0:2c44000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:02c35000 ph data[7]=0:2c35000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:019de000 ph data[8]=0:19de000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:02c57000 ph data[9]=0:2c57000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01930000 ph data[10]=0:1930000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01a19000 ph data[11]=0:1a19000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:019da000 ph data[12]=0:19da000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:01db3000 ph data[13]=0:1db3000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02c4c000 ph data[14]=0:2c4c000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:02c3d000 set TERM ph data[15]=0:2c3d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe4e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9908 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe560, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe5e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe5e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:019e6000 ph data[0]=0:19e6000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:02c5f000 ph data[1]=0:2c5f000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01a08000 ph data[2]=0:1a08000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01d71000 ph data[3]=0:1d71000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01a22000 ph data[4]=0:1a22000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01dbb000 ph data[5]=0:1dbb000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:02c54000 ph data[6]=0:2c54000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:02c45000 ph data[7]=0:2c45000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01926000 ph data[8]=0:1926000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:02c67000 ph data[9]=0:2c67000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01a90000 ph data[10]=0:1a90000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:01d81000 ph data[11]=0:1d81000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:02c1a000 ph data[12]=0:2c1a000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01d7b000 ph data[13]=0:1d7b000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:02c5c000 ph data[14]=0:2c5c000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:02c4d000 set TERM ph data[15]=0:2c4d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe5e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0192e000 ph data[0]=0:192e000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:01967000 ph data[1]=0:1967000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01a98000 ph data[2]=0:1a98000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:01d89000 ph data[3]=0:1d89000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02c22000 ph data[4]=0:2c22000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:019db000 ph data[5]=0:19db000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:02c64000 ph data[6]=0:2c64000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:02c55000 ph data[7]=0:2c55000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01936000 ph data[8]=0:1936000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0196f000 ph data[9]=0:196f000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01aa0000 ph data[10]=0:1aa0000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01d91000 ph data[11]=0:1d91000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:02c2a000 ph data[12]=0:2c2a000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01a23000 ph data[13]=0:1a23000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0195c000 ph data[14]=0:195c000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02c5d000 set TERM ph data[15]=0:2c5d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe660, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0193e000 ph data[0]=0:193e000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01977000 ph data[1]=0:1977000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01aa8000 ph data[2]=0:1aa8000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:01d99000 ph data[3]=0:1d99000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:02c32000 ph data[4]=0:2c32000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02c23000 ph data[5]=0:2c23000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01964000 ph data[6]=0:1964000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:02c65000 ph data[7]=0:2c65000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01946000 ph data[8]=0:1946000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0197f000 ph data[9]=0:197f000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01ab0000 ph data[10]=0:1ab0000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01da1000 ph data[11]=0:1da1000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:02c3a000 ph data[12]=0:2c3a000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:02c2b000 ph data[13]=0:2c2b000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0196c000 ph data[14]=0:196c000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0195d000 set TERM ph data[15]=0:195d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe6e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0194e000 ph data[0]=0:194e000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:019af000 ph data[1]=0:19af000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01ab8000 ph data[2]=0:1ab8000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01da9000 ph data[3]=0:1da9000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:02c42000 ph data[4]=0:2c42000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02c33000 ph data[5]=0:2c33000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0199c000 ph data[6]=0:199c000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01965000 ph data[7]=0:1965000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01956000 ph data[8]=0:1956000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:019b7000 ph data[9]=0:19b7000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01ac0000 ph data[10]=0:1ac0000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01db1000 ph data[11]=0:1db1000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:02c4a000 ph data[12]=0:2c4a000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:02c3b000 ph data[13]=0:2c3b000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:019a4000 ph data[14]=0:19a4000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0196d000 set TERM ph data[15]=0:196d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe760, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe7e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe7e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0195e000 ph data[0]=0:195e000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:019bf000 ph data[1]=0:19bf000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01ac8000 ph data[2]=0:1ac8000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01db9000 ph data[3]=0:1db9000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02c52000 ph data[4]=0:2c52000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:02c43000 ph data[5]=0:2c43000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:019ac000 ph data[6]=0:19ac000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0199d000 ph data[7]=0:199d000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:019a6000 ph data[8]=0:19a6000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:019c7000 ph data[9]=0:19c7000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01a50000 ph data[10]=0:1a50000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:01a21000 ph data[11]=0:1a21000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01952000 ph data[12]=0:1952000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:02c4b000 ph data[13]=0:2c4b000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:019b4000 ph data[14]=0:19b4000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:019a5000 set TERM ph data[15]=0:19a5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe7e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01a2e000 ph data[0]=0:1a2e000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:019cf000 ph data[1]=0:19cf000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01a58000 ph data[2]=0:1a58000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:019d1000 ph data[3]=0:19d1000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0195a000 ph data[4]=0:195a000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:02c53000 ph data[5]=0:2c53000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:019bc000 ph data[6]=0:19bc000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:019ad000 ph data[7]=0:19ad000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01ab6000 ph data[8]=0:1ab6000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:019d7000 ph data[9]=0:19d7000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01a60000 ph data[10]=0:1a60000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:02c11000 ph data[11]=0:2c11000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01962000 ph data[12]=0:1962000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:02c5b000 ph data[13]=0:2c5b000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:019c4000 ph data[14]=0:19c4000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:019b5000 set TERM ph data[15]=0:19b5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe860, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01abe000 ph data[0]=0:1abe000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:019df000 ph data[1]=0:19df000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01a68000 ph data[2]=0:1a68000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:02c19000 ph data[3]=0:2c19000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0196a000 ph data[4]=0:196a000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:01953000 ph data[5]=0:1953000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:019cc000 ph data[6]=0:19cc000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:019bd000 ph data[7]=0:19bd000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01ac6000 ph data[8]=0:1ac6000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:019e7000 ph data[9]=0:19e7000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01a70000 ph data[10]=0:1a70000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:02c21000 ph data[11]=0:2c21000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0199a000 ph data[12]=0:199a000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0195b000 ph data[13]=0:195b000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:019d4000 ph data[14]=0:19d4000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:019c5000 set TERM ph data[15]=0:19c5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe8e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbe960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbe960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01ace000 ph data[0]=0:1ace000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01927000 ph data[1]=0:1927000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01a78000 ph data[2]=0:1a78000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:02c29000 ph data[3]=0:2c29000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:019a2000 ph data[4]=0:19a2000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:01963000 ph data[5]=0:1963000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01914000 ph data[6]=0:1914000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:019cd000 ph data[7]=0:19cd000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01ad6000 ph data[8]=0:1ad6000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0192f000 ph data[9]=0:192f000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01a80000 ph data[10]=0:1a80000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:02c31000 ph data[11]=0:2c31000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:019aa000 ph data[12]=0:19aa000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0196b000 ph data[13]=0:196b000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0191c000 ph data[14]=0:191c000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:019d5000 set TERM ph data[15]=0:19d5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbe960, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef770, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef770, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01a8e000 ph data[0]=0:1a8e000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:019a7000 ph data[1]=0:19a7000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01a40000 ph data[2]=0:1a40000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01991000 ph data[3]=0:1991000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01922000 ph data[4]=0:1922000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:019d3000 ph data[5]=0:19d3000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01aac000 ph data[6]=0:1aac000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0194d000 ph data[7]=0:194d000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01a96000 ph data[8]=0:1a96000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:01ab7000 ph data[9]=0:1ab7000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01a48000 ph data[10]=0:1a48000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:01999000 ph data[11]=0:1999000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0192a000 ph data[12]=0:192a000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01913000 ph data[13]=0:1913000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01ab4000 ph data[14]=0:1ab4000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:01955000 set TERM ph data[15]=0:1955000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef770, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef7f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef7f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01a9e000 ph data[0]=0:1a9e000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:01abf000 ph data[1]=0:1abf000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01b10000 ph data[2]=0:1b10000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:019a1000 ph data[3]=0:19a1000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01932000 ph data[4]=0:1932000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0191b000 ph data[5]=0:191b000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01abc000 ph data[6]=0:1abc000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:01aad000 ph data[7]=0:1aad000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01aa6000 ph data[8]=0:1aa6000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:01ac7000 ph data[9]=0:1ac7000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01b18000 ph data[10]=0:1b18000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:019a9000 ph data[11]=0:19a9000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0193a000 ph data[12]=0:193a000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01923000 ph data[13]=0:1923000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01ac4000 ph data[14]=0:1ac4000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:01ab5000 set TERM ph data[15]=0:1ab5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef870, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef870, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01aae000 ph data[0]=0:1aae000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01acf000 ph data[1]=0:1acf000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01b20000 ph data[2]=0:1b20000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:019b1000 ph data[3]=0:19b1000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01942000 ph data[4]=0:1942000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0192b000 ph data[5]=0:192b000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01acc000 ph data[6]=0:1acc000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:01abd000 ph data[7]=0:1abd000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01a36000 ph data[8]=0:1a36000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01ad7000 ph data[9]=0:1ad7000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01b28000 ph data[10]=0:1b28000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:019b9000 ph data[11]=0:19b9000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0194a000 ph data[12]=0:194a000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01933000 ph data[13]=0:1933000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01ad4000 ph data[14]=0:1ad4000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:01ac5000 set TERM ph data[15]=0:1ac5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef8f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef8f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01a3e000 ph data[0]=0:1a3e000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01adf000 ph data[1]=0:1adf000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01b30000 ph data[2]=0:1b30000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:019c1000 ph data[3]=0:19c1000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01aaa000 ph data[4]=0:1aaa000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0193b000 ph data[5]=0:193b000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01adc000 ph data[6]=0:1adc000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01acd000 ph data[7]=0:1acd000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01a46000 ph data[8]=0:1a46000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:01ae7000 ph data[9]=0:1ae7000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01b38000 ph data[10]=0:1b38000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:019c9000 ph data[11]=0:19c9000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01ab2000 ph data[12]=0:1ab2000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:01943000 ph data[13]=0:1943000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01ae4000 ph data[14]=0:1ae4000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:01ad5000 set TERM ph data[15]=0:1ad5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9914 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef7f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef870, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef8f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:01a85000 ph data[0]=0:1a85000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:01b36000 set TERM ph data[1]=0:1b36000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0870c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:01a45000 ph data[0]=0:1a45000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:01af6000 set TERM ph data[1]=0:1af6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df9b70 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c50 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e87b0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 395e87b0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:01b45000 set TERM ph data[0]=0:1b45000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e87b0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF8F80, \, FALSE, F6C09368) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5DF8F80, B61DBAC0, B64BD778, B5DF5350, F6C0956C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF8F80, \RECYCLED\INFO2, FALSE, F6C09354) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6C08EAC) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0897c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b83608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b83608) AtapiVirtToPhysAddr_: f6b83608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6ba6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:01bb6000 ph data[0]=0:1bb6000 (fff) get Phys(data[n=1+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:01b17000 ph data[1]=0:1b17000 (fff) get Phys(data[n=2+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:01b70000 ph data[2]=0:1b70000 (fff) get Phys(data[n=3+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:01a51000 ph data[3]=0:1a51000 (fff) get Phys(data[n=4+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:01b62000 ph data[4]=0:1b62000 (fff) get Phys(data[n=5+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:01b4b000 ph data[5]=0:1b4b000 (fff) get Phys(data[n=6+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:01b1c000 ph data[6]=0:1b1c000 (fff) get Phys(data[n=7+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:01b0d000 ph data[7]=0:1b0d000 (fff) get Phys(data[n=8+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:01bbe000 ph data[8]=0:1bbe000 (fff) get Phys(data[n=9+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:01b1f000 ph data[9]=0:1b1f000 (fff) get Phys(data[n=10+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:01b78000 ph data[10]=0:1b78000 (fff) get Phys(data[n=11+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:01a59000 ph data[11]=0:1a59000 (fff) get Phys(data[n=12+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:01aea000 ph data[12]=0:1aea000 (fff) get Phys(data[n=13+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:01b53000 ph data[13]=0:1b53000 (fff) get Phys(data[n=14+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:01b24000 ph data[14]=0:1b24000 (fff) get Phys(data[n=15+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:01b15000 set TERM ph data[15]=0:1b15000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6bb6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:01bc6000 ph data[0]=0:1bc6000 (fff) get Phys(data[n=1+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:01b27000 ph data[1]=0:1b27000 (fff) get Phys(data[n=2+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:01b80000 ph data[2]=0:1b80000 (fff) get Phys(data[n=3+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:01a61000 ph data[3]=0:1a61000 (fff) get Phys(data[n=4+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:01af2000 ph data[4]=0:1af2000 (fff) get Phys(data[n=5+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:01b5b000 ph data[5]=0:1b5b000 (fff) get Phys(data[n=6+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:01bec000 ph data[6]=0:1bec000 (fff) get Phys(data[n=7+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:01b1d000 ph data[7]=0:1b1d000 (fff) get Phys(data[n=8+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:01bce000 ph data[8]=0:1bce000 (fff) get Phys(data[n=9+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:01b2f000 ph data[9]=0:1b2f000 (fff) get Phys(data[n=10+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:01b88000 ph data[10]=0:1b88000 (fff) get Phys(data[n=11+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:01b29000 ph data[11]=0:1b29000 (fff) get Phys(data[n=12+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:01afa000 ph data[12]=0:1afa000 (fff) get Phys(data[n=13+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:01b63000 ph data[13]=0:1b63000 (fff) get Phys(data[n=14+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:01bf4000 ph data[14]=0:1bf4000 (fff) get Phys(data[n=15+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:01b25000 set TERM ph data[15]=0:1b25000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d760, OrigWordsRequested 0x5800, DevSize 0x58 IdeReadWrite (REQ): Starting sector is 3960d760, Number of WORDS 0x5800, DevSize 0x58 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bc6000, count b000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:01bd6000 ph data[0]=0:1bd6000 (fff) get Phys(data[n=1+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:01bf7000 ph data[1]=0:1bf7000 (fff) get Phys(data[n=2+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:01b90000 ph data[2]=0:1b90000 (fff) get Phys(data[n=3+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:01b31000 ph data[3]=0:1b31000 (fff) get Phys(data[n=4+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:01b02000 ph data[4]=0:1b02000 (fff) get Phys(data[n=5+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:01aeb000 ph data[5]=0:1aeb000 (fff) get Phys(data[n=6+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:01bfc000 ph data[6]=0:1bfc000 (fff) get Phys(data[n=7+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:01bed000 ph data[7]=0:1bed000 (fff) get Phys(data[n=8+1000]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:01bde000 ph data[8]=0:1bde000 (fff) get Phys(data[n=9+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:01bff000 ph data[9]=0:1bff000 (fff) get Phys(data[n=10+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:01c58000 set TERM ph data[10]=0:1c58000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf99b4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d660, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c088c4 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b83000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:084b6000 set TERM ph data[0]=0:84b6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d6e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9964 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d760, Count 0x58(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xb, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5800, WordsLeft 5800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered b000, full size b000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb64ca6d8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF8F80, \RECYCLED, FALSE, F6C09354) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6C08EAC) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0897c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b83608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b83608) AtapiVirtToPhysAddr_: f6b83608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c088c4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b83000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:084b6000 set TERM ph data[0]=0:84b6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:561) NTFS write-support is EXPERIMENTAL and is disabled by default! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef970, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef970, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01bad000 ph data[0]=0:1bad000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:01b9e000 ph data[1]=0:1b9e000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01bb7000 ph data[2]=0:1bb7000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01c90000 ph data[3]=0:1c90000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01af1000 ph data[4]=0:1af1000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01c02000 ph data[5]=0:1c02000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01beb000 ph data[6]=0:1beb000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:01bbc000 ph data[7]=0:1bbc000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01bb5000 ph data[8]=0:1bb5000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:01ba6000 ph data[9]=0:1ba6000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01bbf000 ph data[10]=0:1bbf000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:01c18000 ph data[11]=0:1c18000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01af9000 ph data[12]=0:1af9000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01c0a000 ph data[13]=0:1c0a000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01bf3000 ph data[14]=0:1bf3000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:01bc4000 set TERM ph data[15]=0:1bc4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef970, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fef9f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fef9f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01bbd000 ph data[0]=0:1bbd000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:01bae000 ph data[1]=0:1bae000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01bc7000 ph data[2]=0:1bc7000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:01c20000 ph data[3]=0:1c20000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01b01000 ph data[4]=0:1b01000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01c12000 ph data[5]=0:1c12000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01bfb000 ph data[6]=0:1bfb000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:01bcc000 ph data[7]=0:1bcc000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01bc5000 ph data[8]=0:1bc5000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:01c7e000 ph data[9]=0:1c7e000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01bcf000 ph data[10]=0:1bcf000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01c28000 ph data[11]=0:1c28000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01b09000 ph data[12]=0:1b09000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01c1a000 ph data[13]=0:1c1a000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01c03000 ph data[14]=0:1c03000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:01bd4000 set TERM ph data[15]=0:1bd4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fefa70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fefa70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01bcd000 ph data[0]=0:1bcd000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01c86000 ph data[1]=0:1c86000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01bd7000 ph data[2]=0:1bd7000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:01c30000 ph data[3]=0:1c30000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01b11000 ph data[4]=0:1b11000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:01c22000 ph data[5]=0:1c22000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01c0b000 ph data[6]=0:1c0b000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:01bdc000 ph data[7]=0:1bdc000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01bd5000 ph data[8]=0:1bd5000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01c8e000 ph data[9]=0:1c8e000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01bdf000 ph data[10]=0:1bdf000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01c38000 ph data[11]=0:1c38000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01b19000 ph data[12]=0:1b19000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01baa000 ph data[13]=0:1baa000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01c13000 ph data[14]=0:1c13000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:01be4000 set TERM ph data[15]=0:1be4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f24 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fef9f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fefaf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fefaf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01bdd000 ph data[0]=0:1bdd000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01c96000 ph data[1]=0:1c96000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01be7000 ph data[2]=0:1be7000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01c40000 ph data[3]=0:1c40000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01b21000 ph data[4]=0:1b21000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:01bb2000 ph data[5]=0:1bb2000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01c1b000 ph data[6]=0:1c1b000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01b6c000 ph data[7]=0:1b6c000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01be5000 ph data[8]=0:1be5000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:01c9e000 ph data[9]=0:1c9e000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01bef000 ph data[10]=0:1bef000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01c48000 ph data[11]=0:1c48000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01be9000 ph data[12]=0:1be9000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:01bba000 ph data[13]=0:1bba000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01c23000 ph data[14]=0:1c23000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:01b74000 set TERM ph data[15]=0:1b74000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ef4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fefa70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665654 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fefaf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff0970, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff0970, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01bcb000 ph data[0]=0:1bcb000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:01b94000 ph data[1]=0:1b94000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01b8d000 ph data[2]=0:1b8d000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01c3e000 ph data[3]=0:1c3e000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01b97000 ph data[4]=0:1b97000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01d30000 ph data[5]=0:1d30000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01c11000 ph data[6]=0:1c11000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:01be2000 ph data[7]=0:1be2000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01bd3000 ph data[8]=0:1bd3000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:01b9c000 ph data[9]=0:1b9c000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01b95000 ph data[10]=0:1b95000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:01c46000 ph data[11]=0:1c46000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01b9f000 ph data[12]=0:1b9f000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01d38000 ph data[13]=0:1d38000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01c19000 ph data[14]=0:1c19000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:01b6a000 set TERM ph data[15]=0:1b6a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff0970, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff09f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff09f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01bdb000 ph data[0]=0:1bdb000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:01ba4000 ph data[1]=0:1ba4000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01b9d000 ph data[2]=0:1b9d000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:01c4e000 ph data[3]=0:1c4e000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01ba7000 ph data[4]=0:1ba7000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01d40000 ph data[5]=0:1d40000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01c21000 ph data[6]=0:1c21000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:01b72000 ph data[7]=0:1b72000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01be3000 ph data[8]=0:1be3000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:01c6c000 ph data[9]=0:1c6c000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01ba5000 ph data[10]=0:1ba5000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01c56000 ph data[11]=0:1c56000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01baf000 ph data[12]=0:1baf000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01d48000 ph data[13]=0:1d48000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01ba9000 ph data[14]=0:1ba9000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:01b7a000 set TERM ph data[15]=0:1b7a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff0a70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff0a70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01b6b000 ph data[0]=0:1b6b000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01c74000 ph data[1]=0:1c74000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01c6d000 ph data[2]=0:1c6d000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:01c5e000 ph data[3]=0:1c5e000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01c7f000 ph data[4]=0:1c7f000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:01d50000 ph data[5]=0:1d50000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01bb1000 ph data[6]=0:1bb1000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:01b82000 ph data[7]=0:1b82000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01b73000 ph data[8]=0:1b73000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01c7c000 ph data[9]=0:1c7c000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01c75000 ph data[10]=0:1c75000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01c66000 ph data[11]=0:1c66000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01c87000 ph data[12]=0:1c87000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01cd8000 ph data[13]=0:1cd8000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01bb9000 ph data[14]=0:1bb9000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:01b8a000 set TERM ph data[15]=0:1b8a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09020 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff0af0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff0af0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01b7b000 ph data[0]=0:1b7b000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01c84000 ph data[1]=0:1c84000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01c7d000 ph data[2]=0:1c7d000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01c6e000 ph data[3]=0:1c6e000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01c8f000 ph data[4]=0:1c8f000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:01ce0000 ph data[5]=0:1ce0000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01bc1000 ph data[6]=0:1bc1000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01b92000 ph data[7]=0:1b92000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01b83000 ph data[8]=0:1b83000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:01c8c000 ph data[9]=0:1c8c000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01c85000 ph data[10]=0:1c85000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01d3e000 ph data[11]=0:1d3e000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01c97000 ph data[12]=0:1c97000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:01ce8000 ph data[13]=0:1ce8000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01bc9000 ph data[14]=0:1bc9000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:01b9a000 set TERM ph data[15]=0:1b9a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9918 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff09f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff0a70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff0af0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b691e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbb0f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fbb0f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bbe000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:01b91000 ph data[0]=0:1b91000 (fff) get Phys(data[n=1+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:01ca2000 ph data[1]=0:1ca2000 (fff) get Phys(data[n=2+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:01c8b000 ph data[2]=0:1c8b000 (fff) get Phys(data[n=3+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:01c54000 ph data[3]=0:1c54000 (fff) get Phys(data[n=4+1000]=f6bc2000) AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:01c4d000 ph data[4]=0:1c4d000 (fff) get Phys(data[n=5+1000]=f6bc3000) AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:01d06000 ph data[5]=0:1d06000 (fff) get Phys(data[n=6+1000]=f6bc4000) AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:01c5f000 ph data[6]=0:1c5f000 (fff) get Phys(data[n=7+1000]=f6bc5000) AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:01cb8000 ph data[7]=0:1cb8000 (fff) get Phys(data[n=8+1000]=f6bc6000) AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:01b99000 ph data[8]=0:1b99000 (fff) get Phys(data[n=9+1000]=f6bc7000) AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:01c2a000 ph data[9]=0:1c2a000 (fff) get Phys(data[n=10+1000]=f6bc8000) AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:01c93000 ph data[10]=0:1c93000 (fff) get Phys(data[n=11+1000]=f6bc9000) AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:01c5c000 ph data[11]=0:1c5c000 (fff) get Phys(data[n=12+1000]=f6bca000) AtapiVirtToPhysAddr_: f6bca000 -> 00000000:01c55000 ph data[12]=0:1c55000 (fff) get Phys(data[n=13+1000]=f6bcb000) AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:01d0e000 ph data[13]=0:1d0e000 (fff) get Phys(data[n=14+1000]=f6bcc000) AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:01c67000 ph data[14]=0:1c67000 (fff) get Phys(data[n=15+1000]=f6bcd000) AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:01cc0000 set TERM ph data[15]=0:1cc0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbb0f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b691e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbb170, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 38fbb170, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bce000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bce000) AtapiVirtToPhysAddr_: f6bce000 -> 00000000:01ba1000 ph data[0]=0:1ba1000 (fff) get Phys(data[n=1+1000]=f6bcf000) AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:01c32000 ph data[1]=0:1c32000 (fff) get Phys(data[n=2+1000]=f6bd0000) AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:01c9b000 set TERM ph data[2]=0:1c9b000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf99b4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbb170, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x3, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b6960c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbb0f0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fbb0f0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:67751000 ph data[0]=0:67751000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:65f92000 set TERM ph data[1]=0:65f92000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbb0f0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68cec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:01d67000 ph data[0]=0:1d67000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:01dd0000 set TERM ph data[1]=0:1dd0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b6940c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b82000, count 1c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:01d27000 ph data[0]=0:1d27000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:01e10000 set TERM ph data[1]=0:1e10000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered e00, WordsLeft e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1c00, full size 1c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c68 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01e46000 ph data[0]=0:1e46000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:01de7000 set TERM ph data[1]=0:1de7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c68 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01e05000 ph data[0]=0:1e05000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:01f46000 set TERM ph data[1]=0:1f46000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c68 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3b0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3b0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01e45000 ph data[0]=0:1e45000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:01f06000 set TERM ph data[1]=0:1f06000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3b0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf4d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01f35000 ph data[0]=0:1f35000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:01ec6000 set TERM ph data[1]=0:1ec6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01ef5000 set TERM ph data[0]=0:1ef5000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058740, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01eb5000 ph data[0]=0:1eb5000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:01f86000 set TERM ph data[1]=0:1f86000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01fb5000 ph data[0]=0:1fb5000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02086000 set TERM ph data[1]=0:2086000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3a0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3a0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01f75000 ph data[0]=0:1f75000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02046000 set TERM ph data[1]=0:2046000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3a0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3b0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3b0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0207d000 ph data[0]=0:207d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02006000 set TERM ph data[1]=0:2006000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3b0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf4d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0203d000 ph data[0]=0:203d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0210e000 set TERM ph data[1]=0:210e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac3c0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac3c0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01ffd000 ph data[0]=0:1ffd000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:020c6000 set TERM ph data[1]=0:20c6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac3c0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c68 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f10, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f10, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:020cf000 ph data[0]=0:20cf000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02120000 set TERM ph data[1]=0:2120000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f10, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5230 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c84000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c84000) AtapiVirtToPhysAddr_: f6c84000 -> 00000000:02105000 set TERM ph data[0]=0:2105000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf99b4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x1, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68c68 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02155000 ph data[0]=0:2155000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:002ce000 set TERM ph data[1]=0:2ce000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f10, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f10, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02115000 ph data[0]=0:2115000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0028e000 set TERM ph data[1]=0:28e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f10, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:002cd000 ph data[0]=0:2cd000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0024e000 set TERM ph data[1]=0:24e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb3f50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb3f50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0028d000 ph data[0]=0:28d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0020e000 set TERM ph data[1]=0:20e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb3f50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0024d000 ph data[0]=0:24d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02346000 set TERM ph data[1]=0:2346000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf4d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0020d000 ph data[0]=0:20d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:023a6000 set TERM ph data[1]=0:23a6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02345000 set TERM ph data[0]=0:2345000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058720, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02372000 ph data[0]=0:2372000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0238b000 set TERM ph data[1]=0:238b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf4d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:023c2000 ph data[0]=0:23c2000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:023e3000 set TERM ph data[1]=0:23e3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0243a000 set TERM ph data[0]=0:243a000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0297b000 ph data[0]=0:297b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:029cc000 set TERM ph data[1]=0:29cc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf4d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:029c3000 ph data[0]=0:29c3000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02a74000 set TERM ph data[1]=0:2a74000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02a63000 set TERM ph data[0]=0:2a63000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02b2d000 ph data[0]=0:2b2d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02e06000 set TERM ph data[1]=0:2e06000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf4d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02b6d000 ph data[0]=0:2b6d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02dc6000 set TERM ph data[1]=0:2dc6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf5230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02e05000 set TERM ph data[0]=0:2e05000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02d89000 ph data[0]=0:2d89000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02dca000 set TERM ph data[1]=0:2dca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd1230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02d49000 set TERM ph data[0]=0:2d49000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0d00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02e08000 ph data[0]=0:2e08000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02d21000 set TERM ph data[1]=0:2d21000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd1230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02e00000 set TERM ph data[0]=0:2e00000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0bc0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbb190, OrigWordsRequested 0x3c00, DevSize 0x3c IdeReadWrite (REQ): Starting sector is 38fbb190, Number of WORDS 0x3c00, DevSize 0x3c AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bba000, count 7800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:02e9c000 ph data[0]=0:2e9c000 (fff) get Phys(data[n=1+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:02ea5000 ph data[1]=0:2ea5000 (fff) get Phys(data[n=2+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:0064e000 ph data[2]=0:64e000 (fff) get Phys(data[n=3+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:02e57000 ph data[3]=0:2e57000 (fff) get Phys(data[n=4+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:005d8000 ph data[4]=0:5d8000 (fff) get Phys(data[n=5+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:02ea9000 ph data[5]=0:2ea9000 (fff) get Phys(data[n=6+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:02e62000 ph data[6]=0:2e62000 (fff) get Phys(data[n=7+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:02ed3000 set TERM ph data[7]=0:2ed3000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbb190, Count 0x3c(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3c00, WordsLeft 3c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 7800, full size 7800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f9c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fbb190, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fbb190, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:67786000 ph data[0]=0:67786000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:65f87000 set TERM ph data[1]=0:65f87000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fbb190, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1f4e0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc62f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc62f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:006c5000 ph data[0]=0:6c5000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0057e000 ph data[1]=0:57e000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:00667000 ph data[2]=0:667000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:00440000 ph data[3]=0:440000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02e79000 ph data[4]=0:2e79000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:02e32000 ph data[5]=0:2e32000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:02e2b000 ph data[6]=0:2e2b000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:006c4000 ph data[7]=0:6c4000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:006bd000 ph data[8]=0:6bd000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0056e000 ph data[9]=0:56e000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0065f000 ph data[10]=0:65f000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:00438000 ph data[11]=0:438000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:02e81000 ph data[12]=0:2e81000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:02e3a000 ph data[13]=0:2e3a000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:02e33000 ph data[14]=0:2e33000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:006bc000 set TERM ph data[15]=0:6bc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc62f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc6370, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc6370, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:006b5000 ph data[0]=0:6b5000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00566000 ph data[1]=0:566000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00657000 ph data[2]=0:657000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:00430000 ph data[3]=0:430000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02e89000 ph data[4]=0:2e89000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:02e42000 ph data[5]=0:2e42000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:02e3b000 ph data[6]=0:2e3b000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:006b4000 ph data[7]=0:6b4000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:006ad000 ph data[8]=0:6ad000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00546000 ph data[9]=0:546000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0064f000 ph data[10]=0:64f000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:00428000 ph data[11]=0:428000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:02e91000 ph data[12]=0:2e91000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:02e4a000 ph data[13]=0:2e4a000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:02e43000 ph data[14]=0:2e43000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:006ac000 set TERM ph data[15]=0:6ac000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc63f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc63f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:00685000 ph data[0]=0:685000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0053e000 ph data[1]=0:53e000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0062f000 ph data[2]=0:62f000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:00420000 ph data[3]=0:420000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:02e19000 ph data[4]=0:2e19000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02e52000 ph data[5]=0:2e52000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02e4b000 ph data[6]=0:2e4b000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00684000 ph data[7]=0:684000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0067d000 ph data[8]=0:67d000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:00536000 ph data[9]=0:536000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:00627000 ph data[10]=0:627000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:00418000 ph data[11]=0:418000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:02e21000 ph data[12]=0:2e21000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:02e5a000 ph data[13]=0:2e5a000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02e53000 ph data[14]=0:2e53000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00664000 set TERM ph data[15]=0:664000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc6470, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc6470, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:00665000 ph data[0]=0:665000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:004fe000 ph data[1]=0:4fe000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0061f000 ph data[2]=0:61f000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:00410000 ph data[3]=0:410000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:02e29000 ph data[4]=0:2e29000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:006c2000 ph data[5]=0:6c2000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:02e5b000 ph data[6]=0:2e5b000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0065c000 ph data[7]=0:65c000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0065d000 ph data[7]=0:65c000 (1fff) get Phys(data[n=8+2000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:00486000 ph data[8]=0:486000 (fff) get Phys(data[n=9+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:00617000 ph data[9]=0:617000 (fff) get Phys(data[n=10+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:00408000 ph data[10]=0:408000 (fff) get Phys(data[n=11+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:02e31000 ph data[11]=0:2e31000 (fff) get Phys(data[n=12+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:006ba000 ph data[12]=0:6ba000 (fff) get Phys(data[n=13+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02e63000 ph data[13]=0:2e63000 (fff) get Phys(data[n=14+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:00654000 set TERM ph data[14]=0:654000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6779048 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6779048: cmd aligned b6779100, d=58 ahci_cmd_ptr 0xb6779100 AtapiDmaSetup: mode 0x0, data f6ace000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6779100) AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100 get Phys(data[0]=f6ace000) AtapiVirtToPhysAddr_: f6ace000 -> 00000000:00625000 ph data[0]=0:625000 (fff) get Phys(data[n=1+1000]=f6acf000) AtapiVirtToPhysAddr_: f6acf000 -> 00000000:0045e000 ph data[1]=0:45e000 (fff) get Phys(data[n=2+1000]=f6ad0000) AtapiVirtToPhysAddr_: f6ad0000 -> 00000000:005c7000 ph data[2]=0:5c7000 (fff) get Phys(data[n=3+1000]=f6ad1000) AtapiVirtToPhysAddr_: f6ad1000 -> 00000000:003f0000 ph data[3]=0:3f0000 (fff) get Phys(data[n=4+1000]=f6ad2000) AtapiVirtToPhysAddr_: f6ad2000 -> 00000000:02e51000 ph data[4]=0:2e51000 (fff) get Phys(data[n=5+1000]=f6ad3000) AtapiVirtToPhysAddr_: f6ad3000 -> 00000000:00682000 ph data[5]=0:682000 (fff) get Phys(data[n=6+1000]=f6ad4000) AtapiVirtToPhysAddr_: f6ad4000 -> 00000000:006b3000 ph data[6]=0:6b3000 (fff) get Phys(data[n=7+1000]=f6ad5000) AtapiVirtToPhysAddr_: f6ad5000 -> 00000000:0061c000 ph data[7]=0:61c000 (fff) get Phys(data[n=8+1000]=f6ad6000) AtapiVirtToPhysAddr_: f6ad6000 -> 00000000:0061d000 ph data[7]=0:61c000 (1fff) get Phys(data[n=8+2000]=f6ad7000) AtapiVirtToPhysAddr_: f6ad7000 -> 00000000:0043e000 ph data[8]=0:43e000 (fff) get Phys(data[n=9+1000]=f6ad8000) AtapiVirtToPhysAddr_: f6ad8000 -> 00000000:005a7000 ph data[9]=0:5a7000 (fff) get Phys(data[n=10+1000]=f6ad9000) AtapiVirtToPhysAddr_: f6ad9000 -> 00000000:afec0000 ph data[10]=0:afec0000 (fff) get Phys(data[n=11+1000]=f6ada000) AtapiVirtToPhysAddr_: f6ada000 -> 00000000:006c1000 ph data[11]=0:6c1000 (fff) get Phys(data[n=12+1000]=f6adb000) AtapiVirtToPhysAddr_: f6adb000 -> 00000000:00662000 ph data[12]=0:662000 (fff) get Phys(data[n=13+1000]=f6adc000) AtapiVirtToPhysAddr_: f6adc000 -> 00000000:006ab000 ph data[13]=0:6ab000 (fff) get Phys(data[n=14+1000]=f6add000) AtapiVirtToPhysAddr_: f6add000 -> 00000000:005f4000 set TERM ph data[14]=0:5f4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6779100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6778030 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6778030: cmd aligned b6778100, d=70 ahci_cmd_ptr 0xb6778100 AtapiDmaSetup: mode 0x0, data f6ade000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6778100) AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100 get Phys(data[0]=f6ade000) AtapiVirtToPhysAddr_: f6ade000 -> 00000000:005f5000 ph data[0]=0:5f5000 (fff) get Phys(data[n=1+1000]=f6adf000) AtapiVirtToPhysAddr_: f6adf000 -> 00000000:00436000 ph data[1]=0:436000 (fff) get Phys(data[n=2+1000]=f6ae0000) AtapiVirtToPhysAddr_: f6ae0000 -> 00000000:0057f000 ph data[2]=0:57f000 (fff) get Phys(data[n=3+1000]=f6ae1000) AtapiVirtToPhysAddr_: f6ae1000 -> 00000000:afec8000 ph data[3]=0:afec8000 (fff) get Phys(data[n=4+1000]=f6ae2000) AtapiVirtToPhysAddr_: f6ae2000 -> 00000000:006b9000 ph data[4]=0:6b9000 (fff) get Phys(data[n=5+1000]=f6ae3000) AtapiVirtToPhysAddr_: f6ae3000 -> 00000000:0065a000 ph data[5]=0:65a000 (fff) get Phys(data[n=6+1000]=f6ae4000) AtapiVirtToPhysAddr_: f6ae4000 -> 00000000:00683000 ph data[6]=0:683000 (fff) get Phys(data[n=7+1000]=f6ae5000) AtapiVirtToPhysAddr_: f6ae5000 -> 00000000:005dc000 ph data[7]=0:5dc000 (fff) get Phys(data[n=8+1000]=f6ae6000) AtapiVirtToPhysAddr_: f6ae6000 -> 00000000:005ed000 ph data[8]=0:5ed000 (fff) get Phys(data[n=9+1000]=f6ae7000) AtapiVirtToPhysAddr_: f6ae7000 -> 00000000:0042e000 ph data[9]=0:42e000 (fff) get Phys(data[n=10+1000]=f6ae8000) AtapiVirtToPhysAddr_: f6ae8000 -> 00000000:0056f000 ph data[10]=0:56f000 (fff) get Phys(data[n=11+1000]=f6ae9000) AtapiVirtToPhysAddr_: f6ae9000 -> 00000000:afed0000 ph data[11]=0:afed0000 (fff) get Phys(data[n=12+1000]=f6aea000) AtapiVirtToPhysAddr_: f6aea000 -> 00000000:006b1000 ph data[12]=0:6b1000 (fff) get Phys(data[n=13+1000]=f6aeb000) AtapiVirtToPhysAddr_: f6aeb000 -> 00000000:00652000 ph data[13]=0:652000 (fff) get Phys(data[n=14+1000]=f6aec000) AtapiVirtToPhysAddr_: f6aec000 -> 00000000:00663000 ph data[14]=0:663000 (fff) get Phys(data[n=15+1000]=f6aed000) AtapiVirtToPhysAddr_: f6aed000 -> 00000000:005c4000 set TERM ph data[15]=0:5c4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6778100, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960d960, OrigWordsRequested 0x5300, DevSize 0x53 IdeReadWrite (REQ): Starting sector is 3960d960, Number of WORDS 0x5300, DevSize 0x53 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6aee000, count a600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6aee000) AtapiVirtToPhysAddr_: f6aee000 -> 00000000:005dd000 ph data[0]=0:5dd000 (fff) get Phys(data[n=1+1000]=f6aef000) AtapiVirtToPhysAddr_: f6aef000 -> 00000000:00426000 ph data[1]=0:426000 (fff) get Phys(data[n=2+1000]=f6af0000) AtapiVirtToPhysAddr_: f6af0000 -> 00000000:00567000 ph data[2]=0:567000 (fff) get Phys(data[n=3+1000]=f6af1000) AtapiVirtToPhysAddr_: f6af1000 -> 00000000:afed8000 ph data[3]=0:afed8000 (fff) get Phys(data[n=4+1000]=f6af2000) AtapiVirtToPhysAddr_: f6af2000 -> 00000000:006a9000 ph data[4]=0:6a9000 (fff) get Phys(data[n=5+1000]=f6af3000) AtapiVirtToPhysAddr_: f6af3000 -> 00000000:0062a000 ph data[5]=0:62a000 (fff) get Phys(data[n=6+1000]=f6af4000) AtapiVirtToPhysAddr_: f6af4000 -> 00000000:0065b000 ph data[6]=0:65b000 (fff) get Phys(data[n=7+1000]=f6af5000) AtapiVirtToPhysAddr_: f6af5000 -> 00000000:005a4000 ph data[7]=0:5a4000 (fff) get Phys(data[n=8+1000]=f6af6000) AtapiVirtToPhysAddr_: f6af6000 -> 00000000:005c5000 ph data[8]=0:5c5000 (fff) get Phys(data[n=9+1000]=f6af7000) AtapiVirtToPhysAddr_: f6af7000 -> 00000000:0041e000 ph data[9]=0:41e000 (fff) get Phys(data[n=10+1000]=f6af8000) AtapiVirtToPhysAddr_: f6af8000 -> 00000000:00547000 set TERM ph data[10]=0:547000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf988c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc6370, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc63f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9964 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc6470, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6779048, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9914 ** Ide: Command AtaReq 0xb6779048 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d860, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048 AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100) prd_length 0xf, flags 0x5, base 8e3c100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc62f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc62f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0056d000 ph data[0]=0:56d000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:00406000 ph data[1]=0:406000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:004ff000 ph data[2]=0:4ff000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:afdc8000 ph data[3]=0:afdc8000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:00651000 ph data[4]=0:651000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:005da000 ph data[5]=0:5da000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0061b000 ph data[6]=0:61b000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0053c000 ph data[7]=0:53c000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:00545000 ph data[8]=0:545000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:003fe000 ph data[9]=0:3fe000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0046f000 ph data[10]=0:46f000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:afdd0000 ph data[11]=0:afdd0000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:00631000 ph data[12]=0:631000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:005ca000 ph data[13]=0:5ca000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:005f3000 ph data[14]=0:5f3000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00534000 set TERM ph data[15]=0:534000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc6370, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc6370, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0053d000 ph data[0]=0:53d000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:003f6000 ph data[1]=0:3f6000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00467000 ph data[2]=0:467000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:afdd8000 ph data[3]=0:afdd8000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:00629000 ph data[4]=0:629000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:005a2000 ph data[5]=0:5a2000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:005db000 ph data[6]=0:5db000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:004fc000 ph data[7]=0:4fc000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:00535000 ph data[8]=0:535000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:003ee000 ph data[9]=0:3ee000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0045f000 ph data[10]=0:45f000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:afde0000 ph data[11]=0:afde0000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:00621000 ph data[12]=0:621000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:00582000 ph data[13]=0:582000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:005c3000 ph data[14]=0:5c3000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00474000 set TERM ph data[15]=0:474000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=5 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc63f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc63f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:004fd000 ph data[0]=0:4fd000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afec6000 ph data[1]=0:afec6000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0043f000 ph data[2]=0:43f000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:afde8000 ph data[3]=0:afde8000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:00619000 ph data[4]=0:619000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0056a000 ph data[5]=0:56a000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:005a3000 ph data[6]=0:5a3000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0046c000 ph data[7]=0:46c000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:00485000 ph data[8]=0:485000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afece000 ph data[9]=0:afece000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:00437000 ph data[10]=0:437000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afdf0000 ph data[11]=0:afdf0000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:005f1000 ph data[12]=0:5f1000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:00542000 ph data[13]=0:542000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0057b000 ph data[14]=0:57b000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00464000 set TERM ph data[15]=0:464000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 6 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=6 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc6470, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fc6470, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:00475000 ph data[0]=0:475000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afed6000 ph data[1]=0:afed6000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0042f000 ph data[2]=0:42f000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afdf8000 ph data[3]=0:afdf8000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:005d9000 ph data[4]=0:5d9000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0053a000 ph data[5]=0:53a000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0056b000 ph data[6]=0:56b000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0009c000 ph data[7]=0:9c000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0046d000 ph data[8]=0:46d000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afede000 ph data[9]=0:afede000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:00427000 ph data[10]=0:427000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:afe00000 ph data[11]=0:afe00000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:005c9000 ph data[12]=0:5c9000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:00532000 ph data[13]=0:532000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:00543000 ph data[14]=0:543000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0043c000 set TERM ph data[15]=0:43c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 7 request(s)! AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6778030, SCmd 0x28 UniataNeedQueueing: qd=6 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6778030 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d8e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030 AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100) prd_length 0x10, flags 0x5, base 8e3b100 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=5 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9924 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d960, Count 0x53(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xb, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5300, WordsLeft 5300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a600, full size a600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98dc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc62f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665654 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc6370, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665654 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc63f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e1f4e0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1f4e0, CDB 0xb5e1f510, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9964 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc6470, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1f4e0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1f4e0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1f4e0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f9c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fc62f0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fc62f0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3fefd000 ph data[0]=0:3fefd000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:6778e000 set TERM ph data[1]=0:6778e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fc62f0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0690 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058760, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39058760, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:004fa000 ph data[0]=0:4fa000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0053b000 set TERM ph data[1]=0:53b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058760, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058770, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058770, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0041a000 ph data[0]=0:41a000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0042b000 ph data[1]=0:42b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:003f4000 ph data[2]=0:3f4000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0040d000 ph data[3]=0:40d000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:afdfe000 ph data[4]=0:afdfe000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:afec7000 ph data[5]=0:afec7000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:afe50000 ph data[6]=0:afe50000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00439000 ph data[7]=0:439000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:00412000 ph data[8]=0:412000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:00423000 ph data[9]=0:423000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0012c000 ph data[10]=0:12c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:00405000 ph data[11]=0:405000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:afe06000 ph data[12]=0:afe06000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:afecf000 ph data[13]=0:afecf000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:afc40000 ph data[14]=0:afc40000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00431000 set TERM ph data[15]=0:431000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058770, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390587f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390587f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0040a000 ph data[0]=0:40a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0041b000 ph data[1]=0:41b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:afec4000 ph data[2]=0:afec4000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:003fd000 ph data[3]=0:3fd000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:afe0e000 ph data[4]=0:afe0e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:afed7000 ph data[5]=0:afed7000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:afc48000 ph data[6]=0:afc48000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:00429000 ph data[7]=0:429000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:00402000 ph data[8]=0:402000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00413000 ph data[9]=0:413000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:afecc000 ph data[10]=0:afecc000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:003f5000 ph data[11]=0:3f5000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:afe16000 ph data[12]=0:afe16000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:afedf000 ph data[13]=0:afedf000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:afc50000 ph data[14]=0:afc50000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00421000 set TERM ph data[15]=0:421000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058870, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058870, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:003fa000 ph data[0]=0:3fa000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0040b000 ph data[1]=0:40b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:afed4000 ph data[2]=0:afed4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:afec5000 ph data[3]=0:afec5000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:afe1e000 ph data[4]=0:afe1e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:afee7000 ph data[5]=0:afee7000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:afc58000 ph data[6]=0:afc58000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00419000 ph data[7]=0:419000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:003f2000 ph data[8]=0:3f2000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:00403000 ph data[9]=0:403000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:afedc000 ph data[10]=0:afedc000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afecd000 ph data[11]=0:afecd000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:afe26000 ph data[12]=0:afe26000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:afdbf000 ph data[13]=0:afdbf000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:afc60000 ph data[14]=0:afc60000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00411000 set TERM ph data[15]=0:411000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390587f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390588f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390588f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:afec2000 ph data[0]=0:afec2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:003fb000 ph data[1]=0:3fb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:afee4000 ph data[2]=0:afee4000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afed5000 ph data[3]=0:afed5000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:afe2e000 ph data[4]=0:afe2e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:afdc7000 ph data[5]=0:afdc7000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:afc68000 ph data[6]=0:afc68000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:00409000 ph data[7]=0:409000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:afeca000 ph data[8]=0:afeca000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:003f3000 ph data[9]=0:3f3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:afdc4000 ph data[10]=0:afdc4000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:afedd000 ph data[11]=0:afedd000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:afe36000 ph data[12]=0:afe36000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:afdcf000 ph data[13]=0:afdcf000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afc70000 ph data[14]=0:afc70000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:00401000 set TERM ph data[15]=0:401000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0a44 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058870, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390588f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd05f8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058760, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39058760, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:afed2000 ph data[0]=0:afed2000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:afec3000 set TERM ph data[1]=0:afec3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058760, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0690 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058760, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39058760, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:afdea000 ph data[0]=0:afdea000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:afddb000 set TERM ph data[1]=0:afddb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058760, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058770, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058770, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:afe2a000 ph data[0]=0:afe2a000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:afe1b000 ph data[1]=0:afe1b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:afe4c000 ph data[2]=0:afe4c000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:afe3d000 ph data[3]=0:afe3d000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:afd5e000 ph data[4]=0:afd5e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:afc3f000 ph data[5]=0:afc3f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0b8c0000 ph data[6]=0:b8c0000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:afe01000 ph data[7]=0:afe01000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:afe32000 ph data[8]=0:afe32000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:afe23000 ph data[9]=0:afe23000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:afe54000 ph data[10]=0:afe54000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:afe45000 ph data[11]=0:afe45000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:afd66000 ph data[12]=0:afd66000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:afc47000 ph data[13]=0:afc47000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0b8c8000 ph data[14]=0:b8c8000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:afe09000 set TERM ph data[15]=0:afe09000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058770, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390587f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390587f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:afe3a000 ph data[0]=0:afe3a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:afe2b000 ph data[1]=0:afe2b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:afc3c000 ph data[2]=0:afc3c000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:afe4d000 ph data[3]=0:afe4d000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:afd6e000 ph data[4]=0:afd6e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:afc4f000 ph data[5]=0:afc4f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0b8d0000 ph data[6]=0:b8d0000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:afe11000 ph data[7]=0:afe11000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:afe42000 ph data[8]=0:afe42000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:afe33000 ph data[9]=0:afe33000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:afc44000 ph data[10]=0:afc44000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:afe55000 ph data[11]=0:afe55000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0b87e000 ph data[12]=0:b87e000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:afc57000 ph data[13]=0:afc57000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0b8d8000 ph data[14]=0:b8d8000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afe19000 set TERM ph data[15]=0:afe19000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0a44 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390587f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058870, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058870, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:afe4a000 ph data[0]=0:afe4a000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afe3b000 ph data[1]=0:afe3b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:afc4c000 ph data[2]=0:afc4c000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:afc3d000 ph data[3]=0:afc3d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0b886000 ph data[4]=0:b886000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:afc5f000 ph data[5]=0:afc5f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0b8e0000 ph data[6]=0:b8e0000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:afe21000 ph data[7]=0:afe21000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:afe52000 ph data[8]=0:afe52000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afe43000 ph data[9]=0:afe43000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:afc54000 ph data[10]=0:afc54000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afc45000 ph data[11]=0:afc45000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0b88e000 ph data[12]=0:b88e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:afc67000 ph data[13]=0:afc67000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0b8e8000 ph data[14]=0:b8e8000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:afe29000 set TERM ph data[15]=0:afe29000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0a44 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058870, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390588f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390588f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:afc42000 ph data[0]=0:afc42000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afe4b000 ph data[1]=0:afe4b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:afc5c000 ph data[2]=0:afc5c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afc4d000 ph data[3]=0:afc4d000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0b896000 ph data[4]=0:b896000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:afc6f000 ph data[5]=0:afc6f000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0b8f0000 ph data[6]=0:b8f0000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:afe31000 ph data[7]=0:afe31000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:afc4a000 ph data[8]=0:afc4a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afe53000 ph data[9]=0:afe53000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:afc64000 ph data[10]=0:afc64000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:afc55000 ph data[11]=0:afc55000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b89e000 ph data[12]=0:b89e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:afc77000 ph data[13]=0:afc77000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0b8f8000 ph data[14]=0:b8f8000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:afe39000 set TERM ph data[15]=0:afe39000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0a44 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390588f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f9c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058770, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39058770, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:65f8a000 ph data[0]=0:65f8a000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:65f8b000 set TERM ph data[0]=0:65f8a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058770, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (dll/ntdll/ldr/ldrutils.c:1335) LDR: LdrpMapDll Relocating Image Name C:\ReactOS\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.2600.2982_none_deadbeef\comctl32.dll (7BEB0000-7C077000 -> 00C80000) (dll/ntdll/ldr/ldrutils.c:1374) Overlapping DLL: C:\ReactOS\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.2600.2982_none_deadbeef\comctl32.dll TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058d70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058d70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0b8a6000 ph data[0]=0:b8a6000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:afc7f000 ph data[1]=0:afc7f000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0b900000 ph data[2]=0:b900000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:afe41000 ph data[3]=0:afe41000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:afc52000 ph data[4]=0:afc52000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:afc43000 ph data[5]=0:afc43000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:afc74000 ph data[6]=0:afc74000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:afc65000 ph data[7]=0:afc65000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0b8ae000 ph data[8]=0:b8ae000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:afc87000 ph data[9]=0:afc87000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0b908000 ph data[10]=0:b908000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:afe49000 ph data[11]=0:afe49000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:afc5a000 ph data[12]=0:afc5a000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:afc4b000 ph data[13]=0:afc4b000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:afc7c000 ph data[14]=0:afc7c000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:afc6d000 set TERM ph data[15]=0:afc6d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058d70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058df0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058df0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0b8b6000 ph data[0]=0:b8b6000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:afc8f000 ph data[1]=0:afc8f000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0b910000 ph data[2]=0:b910000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:afe51000 ph data[3]=0:afe51000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:afc62000 ph data[4]=0:afc62000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:afc53000 ph data[5]=0:afc53000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:afc84000 ph data[6]=0:afc84000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:afc75000 ph data[7]=0:afc75000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0b8be000 ph data[8]=0:b8be000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:afc97000 ph data[9]=0:afc97000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0b918000 ph data[10]=0:b918000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:afc41000 ph data[11]=0:afc41000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:afc6a000 ph data[12]=0:afc6a000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:afc5b000 ph data[13]=0:afc5b000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:afc8c000 ph data[14]=0:afc8c000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afc7d000 set TERM ph data[15]=0:afc7d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058e70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058e70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0b8c6000 ph data[0]=0:b8c6000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afd5f000 ph data[1]=0:afd5f000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0b920000 ph data[2]=0:b920000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:afc49000 ph data[3]=0:afc49000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:afc72000 ph data[4]=0:afc72000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:afc63000 ph data[5]=0:afc63000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:afc94000 ph data[6]=0:afc94000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:afc85000 ph data[7]=0:afc85000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0b8ce000 ph data[8]=0:b8ce000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afd67000 ph data[9]=0:afd67000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0b928000 ph data[10]=0:b928000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afc51000 ph data[11]=0:afc51000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:afc7a000 ph data[12]=0:afc7a000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:afc6b000 ph data[13]=0:afc6b000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:afc9c000 ph data[14]=0:afc9c000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:afc8d000 set TERM ph data[15]=0:afc8d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058ef0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058ef0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0b8d6000 ph data[0]=0:b8d6000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afd6f000 ph data[1]=0:afd6f000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0b930000 ph data[2]=0:b930000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afc59000 ph data[3]=0:afc59000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:afc82000 ph data[4]=0:afc82000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:afc73000 ph data[5]=0:afc73000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:afd6c000 ph data[6]=0:afd6c000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:afc95000 ph data[7]=0:afc95000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b8de000 ph data[8]=0:b8de000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b877000 ph data[9]=0:b877000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0b938000 ph data[10]=0:b938000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:afc61000 ph data[11]=0:afc61000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:afc8a000 ph data[12]=0:afc8a000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:afc7b000 ph data[13]=0:afc7b000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0b87c000 ph data[14]=0:b87c000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:afc9d000 set TERM ph data[15]=0:afc9d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960da60, OrigWordsRequested 0x6b00, DevSize 0x6b IdeReadWrite (REQ): Starting sector is 3960da60, Number of WORDS 0x6b00, DevSize 0x6b AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6bb4000, count d600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:0b8e6000 ph data[0]=0:b8e6000 (fff) get Phys(data[n=1+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:0b87f000 ph data[1]=0:b87f000 (fff) get Phys(data[n=2+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:0b940000 ph data[2]=0:b940000 (fff) get Phys(data[n=3+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:afc69000 ph data[3]=0:afc69000 (fff) get Phys(data[n=4+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:afc92000 ph data[4]=0:afc92000 (fff) get Phys(data[n=5+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:afc83000 ph data[5]=0:afc83000 (fff) get Phys(data[n=6+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:0b884000 ph data[6]=0:b884000 (fff) get Phys(data[n=7+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:afd65000 ph data[7]=0:afd65000 (fff) get Phys(data[n=8+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:0b8ee000 ph data[8]=0:b8ee000 (fff) get Phys(data[n=9+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:0b887000 ph data[9]=0:b887000 (fff) get Phys(data[n=10+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:0b948000 ph data[10]=0:b948000 (fff) get Phys(data[n=11+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:afc71000 ph data[11]=0:afc71000 (fff) get Phys(data[n=12+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:afc9a000 ph data[12]=0:afc9a000 (fff) get Phys(data[n=13+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:afc8b000 set TERM ph data[13]=0:afc8b000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058df0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058e70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058ef0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98bc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960da60, Count 0x6b(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xe, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 6b00, WordsLeft 6b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered d600, full size d600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058f70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058f70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0b9f8000 ph data[0]=0:b9f8000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0b8e9000 ph data[1]=0:b8e9000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0b912000 ph data[2]=0:b912000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0b90b000 ph data[3]=0:b90b000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0b93c000 ph data[4]=0:b93c000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0b925000 ph data[5]=0:b925000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0b9a6000 ph data[6]=0:b9a6000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0b93f000 ph data[7]=0:b93f000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba00000 ph data[8]=0:ba00000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0b8f1000 ph data[9]=0:b8f1000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0b91a000 ph data[10]=0:b91a000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0b913000 ph data[11]=0:b913000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0b944000 ph data[12]=0:b944000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0b92d000 ph data[13]=0:b92d000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0b9ae000 ph data[14]=0:b9ae000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0b947000 set TERM ph data[15]=0:b947000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058f70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058ff0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058ff0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba08000 ph data[0]=0:ba08000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0b8f9000 ph data[1]=0:b8f9000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0b922000 ph data[2]=0:b922000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0b91b000 ph data[3]=0:b91b000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0b94c000 ph data[4]=0:b94c000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b935000 ph data[5]=0:b935000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0b9b6000 ph data[6]=0:b9b6000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0b94f000 ph data[7]=0:b94f000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0ba10000 ph data[8]=0:ba10000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0b901000 ph data[9]=0:b901000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0b92a000 ph data[10]=0:b92a000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0b923000 ph data[11]=0:b923000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0b954000 ph data[12]=0:b954000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b93d000 ph data[13]=0:b93d000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0b9be000 ph data[14]=0:b9be000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0b957000 set TERM ph data[15]=0:b957000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39059070, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39059070, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0ba18000 ph data[0]=0:ba18000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0b909000 ph data[1]=0:b909000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0b932000 ph data[2]=0:b932000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0b92b000 ph data[3]=0:b92b000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0b95c000 ph data[4]=0:b95c000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0b945000 ph data[5]=0:b945000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0b9c6000 ph data[6]=0:b9c6000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0b95f000 ph data[7]=0:b95f000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0ba20000 ph data[8]=0:ba20000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0b911000 ph data[9]=0:b911000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0b93a000 ph data[10]=0:b93a000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0b933000 ph data[11]=0:b933000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0b964000 ph data[12]=0:b964000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0b94d000 ph data[13]=0:b94d000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0b9ce000 ph data[14]=0:b9ce000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0b967000 set TERM ph data[15]=0:b967000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0e0c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058ff0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390590f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390590f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0ba28000 ph data[0]=0:ba28000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0b919000 ph data[1]=0:b919000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0b942000 ph data[2]=0:b942000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0b93b000 ph data[3]=0:b93b000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0b96c000 ph data[4]=0:b96c000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0b955000 ph data[5]=0:b955000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0b9d6000 ph data[6]=0:b9d6000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0b96f000 ph data[7]=0:b96f000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0ba30000 ph data[8]=0:ba30000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b921000 ph data[9]=0:b921000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0b94a000 ph data[10]=0:b94a000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0b943000 ph data[11]=0:b943000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b974000 ph data[12]=0:b974000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0b95d000 ph data[13]=0:b95d000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0b9de000 ph data[14]=0:b9de000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0b977000 set TERM ph data[15]=0:b977000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39059070, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9914 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390590f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058970, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058970, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0b965000 ph data[0]=0:b965000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0b9e6000 ph data[1]=0:b9e6000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0b97f000 ph data[2]=0:b97f000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0ba40000 ph data[3]=0:ba40000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0b931000 ph data[4]=0:b931000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0b95a000 ph data[5]=0:b95a000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0b953000 ph data[6]=0:b953000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0b984000 ph data[7]=0:b984000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0b96d000 ph data[8]=0:b96d000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0b9ee000 ph data[9]=0:b9ee000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0b987000 ph data[10]=0:b987000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0ba48000 ph data[11]=0:ba48000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0b939000 ph data[12]=0:b939000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0b962000 ph data[13]=0:b962000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0b95b000 ph data[14]=0:b95b000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0b98c000 set TERM ph data[15]=0:b98c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058970, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390589f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390589f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0b975000 ph data[0]=0:b975000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0b9f6000 ph data[1]=0:b9f6000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0b98f000 ph data[2]=0:b98f000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0ba50000 ph data[3]=0:ba50000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0b941000 ph data[4]=0:b941000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b96a000 ph data[5]=0:b96a000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0b963000 ph data[6]=0:b963000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0b994000 ph data[7]=0:b994000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0b97d000 ph data[8]=0:b97d000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0b9fe000 ph data[9]=0:b9fe000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0b997000 ph data[10]=0:b997000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0ba58000 ph data[11]=0:ba58000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0b949000 ph data[12]=0:b949000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b972000 ph data[13]=0:b972000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0b96b000 ph data[14]=0:b96b000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0b99c000 set TERM ph data[15]=0:b99c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058a70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058a70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0b985000 ph data[0]=0:b985000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0ba06000 ph data[1]=0:ba06000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0b99f000 ph data[2]=0:b99f000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0ba60000 ph data[3]=0:ba60000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0b951000 ph data[4]=0:b951000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0b97a000 ph data[5]=0:b97a000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0b973000 ph data[6]=0:b973000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0b9a4000 ph data[7]=0:b9a4000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0b98d000 ph data[8]=0:b98d000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0ba0e000 ph data[9]=0:ba0e000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0b9a7000 ph data[10]=0:b9a7000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0ba68000 ph data[11]=0:ba68000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0b959000 ph data[12]=0:b959000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0b982000 ph data[13]=0:b982000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0b97b000 ph data[14]=0:b97b000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0b9ac000 set TERM ph data[15]=0:b9ac000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390589f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058af0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058af0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0b995000 ph data[0]=0:b995000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0ba16000 ph data[1]=0:ba16000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0b9af000 ph data[2]=0:b9af000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0ba70000 ph data[3]=0:ba70000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0b961000 ph data[4]=0:b961000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0b98a000 ph data[5]=0:b98a000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0b983000 ph data[6]=0:b983000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0b9b4000 ph data[7]=0:b9b4000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b99d000 ph data[8]=0:b99d000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0ba1e000 ph data[9]=0:ba1e000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0b9b7000 ph data[10]=0:b9b7000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0ba78000 ph data[11]=0:ba78000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b969000 ph data[12]=0:b969000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0b992000 ph data[13]=0:b992000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0b98b000 ph data[14]=0:b98b000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0b9bc000 set TERM ph data[15]=0:b9bc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0e64 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058a70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9964 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058af0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058b70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058b70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba25000 ph data[0]=0:ba25000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0baa6000 ph data[1]=0:baa6000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba3f000 ph data[2]=0:ba3f000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb00000 ph data[3]=0:bb00000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0b9f1000 ph data[4]=0:b9f1000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0ba1a000 ph data[5]=0:ba1a000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0ba13000 ph data[6]=0:ba13000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0ba44000 ph data[7]=0:ba44000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba2d000 ph data[8]=0:ba2d000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0baae000 ph data[9]=0:baae000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba47000 ph data[10]=0:ba47000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb08000 ph data[11]=0:bb08000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0b9f9000 ph data[12]=0:b9f9000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0ba22000 ph data[13]=0:ba22000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0ba1b000 ph data[14]=0:ba1b000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0ba4c000 set TERM ph data[15]=0:ba4c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058b70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058bf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058bf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba35000 ph data[0]=0:ba35000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bab6000 ph data[1]=0:bab6000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba4f000 ph data[2]=0:ba4f000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb10000 ph data[3]=0:bb10000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0ba01000 ph data[4]=0:ba01000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0ba2a000 ph data[5]=0:ba2a000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0ba23000 ph data[6]=0:ba23000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0ba54000 ph data[7]=0:ba54000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0ba3d000 ph data[8]=0:ba3d000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0babe000 ph data[9]=0:babe000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0ba57000 ph data[10]=0:ba57000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb18000 ph data[11]=0:bb18000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0ba09000 ph data[12]=0:ba09000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0ba32000 ph data[13]=0:ba32000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0ba2b000 ph data[14]=0:ba2b000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0ba5c000 set TERM ph data[15]=0:ba5c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0e14 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058bf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058c70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058c70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0ba45000 ph data[0]=0:ba45000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bac6000 ph data[1]=0:bac6000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0ba5f000 ph data[2]=0:ba5f000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb20000 ph data[3]=0:bb20000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0ba11000 ph data[4]=0:ba11000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0ba3a000 ph data[5]=0:ba3a000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0ba33000 ph data[6]=0:ba33000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0ba64000 ph data[7]=0:ba64000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0ba4d000 ph data[8]=0:ba4d000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bace000 ph data[9]=0:bace000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0ba67000 ph data[10]=0:ba67000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bb28000 ph data[11]=0:bb28000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0ba19000 ph data[12]=0:ba19000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0ba42000 ph data[13]=0:ba42000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0ba3b000 ph data[14]=0:ba3b000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0ba6c000 set TERM ph data[15]=0:ba6c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0e64 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058c70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0f90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058cf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39058cf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0ba55000 ph data[0]=0:ba55000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bad6000 ph data[1]=0:bad6000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0ba6f000 ph data[2]=0:ba6f000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bb30000 ph data[3]=0:bb30000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0ba21000 ph data[4]=0:ba21000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0ba4a000 ph data[5]=0:ba4a000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0ba43000 ph data[6]=0:ba43000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0ba74000 ph data[7]=0:ba74000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0ba5d000 ph data[8]=0:ba5d000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bade000 ph data[9]=0:bade000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0ba77000 ph data[10]=0:ba77000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bb38000 ph data[11]=0:bb38000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0ba29000 ph data[12]=0:ba29000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0ba52000 ph data[13]=0:ba52000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0ba4b000 ph data[14]=0:ba4b000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0ba7c000 set TERM ph data[15]=0:ba7c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0e5c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058cf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0b04 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bafc000 ph data[0]=0:bafc000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bae5000 set TERM ph data[1]=0:bae5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0690 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bb3c000 ph data[0]=0:bb3c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bb25000 set TERM ph data[1]=0:bb25000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0bc0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bb7c000 set TERM ph data[0]=0:bb7c000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0690 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bb93000 ph data[0]=0:bb93000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bbc4000 set TERM ph data[1]=0:bbc4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0bc0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bbd3000 set TERM ph data[0]=0:bbd3000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0690 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bc35000 ph data[0]=0:bc35000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bdfe000 set TERM ph data[1]=0:bdfe000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0bc0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bdb5000 set TERM ph data[0]=0:bdb5000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0690 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bdd9000 ph data[0]=0:bdd9000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0be0a000 set TERM ph data[1]=0:be0a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0bc0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0be19000 set TERM ph data[0]=0:be19000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058700, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0690 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0be59000 ph data[0]=0:be59000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0be8a000 set TERM ph data[1]=0:be8a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bd0bc0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0be99000 set TERM ph data[0]=0:be99000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085f8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4170, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4170, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bf4f000 ph data[0]=0:bf4f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c008000 set TERM ph data[1]=0:c008000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4170, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085f8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bf97000 ph data[0]=0:bf97000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c058000 set TERM ph data[1]=0:c058000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085f8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4170, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4170, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bfd7000 ph data[0]=0:bfd7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c098000 set TERM ph data[1]=0:c098000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4170, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:a0a33000 ph data[0]=0:a0a33000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:a0a2c000 ph data[1]=0:a0a2c000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:a0a2d000 ph data[1]=0:a0a2c000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:a0a2e000 ph data[1]=0:a0a2c000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:a0a2f000 ph data[1]=0:a0a2c000 (3fff) get Phys(data[n=2+4000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:a0a30000 ph data[1]=0:a0a2c000 (4fff) get Phys(data[n=2+5000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:a0a31000 ph data[1]=0:a0a2c000 (5fff) get Phys(data[n=2+6000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:a0a32000 ph data[1]=0:a0a2c000 (6fff) get Phys(data[n=2+7000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:a0a3b000 ph data[2]=0:a0a3b000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:a0a34000 ph data[3]=0:a0a34000 (fff) get Phys(data[n=4+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:a0a35000 ph data[3]=0:a0a34000 (1fff) get Phys(data[n=4+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:a0a36000 ph data[3]=0:a0a34000 (2fff) get Phys(data[n=4+3000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:a0a37000 ph data[3]=0:a0a34000 (3fff) get Phys(data[n=4+4000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:a0a38000 ph data[3]=0:a0a34000 (4fff) get Phys(data[n=4+5000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:a0a39000 ph data[3]=0:a0a34000 (5fff) get Phys(data[n=4+6000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:a0a3a000 set TERM ph data[3]=0:a0a34000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606460, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396064e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396064e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:a0a43000 ph data[0]=0:a0a43000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:a0a3c000 ph data[1]=0:a0a3c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:a0a3d000 ph data[1]=0:a0a3c000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:a0a3e000 ph data[1]=0:a0a3c000 (2fff) get Phys(data[n=2+3000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:a0a3f000 ph data[1]=0:a0a3c000 (3fff) get Phys(data[n=2+4000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:a0a40000 ph data[1]=0:a0a3c000 (4fff) get Phys(data[n=2+5000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:a0a41000 ph data[1]=0:a0a3c000 (5fff) get Phys(data[n=2+6000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:a0a42000 ph data[1]=0:a0a3c000 (6fff) get Phys(data[n=2+7000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:a0a4b000 ph data[2]=0:a0a4b000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:a0a44000 ph data[3]=0:a0a44000 (fff) get Phys(data[n=4+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:a0a45000 ph data[3]=0:a0a44000 (1fff) get Phys(data[n=4+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:a0a46000 ph data[3]=0:a0a44000 (2fff) get Phys(data[n=4+3000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:a0a47000 ph data[3]=0:a0a44000 (3fff) get Phys(data[n=4+4000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:a0a48000 ph data[3]=0:a0a44000 (4fff) get Phys(data[n=4+5000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:a0a49000 ph data[3]=0:a0a44000 (5fff) get Phys(data[n=4+6000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:a0a4a000 set TERM ph data[3]=0:a0a44000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:a0a53000 ph data[0]=0:a0a53000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:a0a4c000 ph data[1]=0:a0a4c000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:a0a4d000 ph data[1]=0:a0a4c000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:a0a4e000 ph data[1]=0:a0a4c000 (2fff) get Phys(data[n=2+3000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:a0a4f000 ph data[1]=0:a0a4c000 (3fff) get Phys(data[n=2+4000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:a0a50000 ph data[1]=0:a0a4c000 (4fff) get Phys(data[n=2+5000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:a0a51000 ph data[1]=0:a0a4c000 (5fff) get Phys(data[n=2+6000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:a0a52000 ph data[1]=0:a0a4c000 (6fff) get Phys(data[n=2+7000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:a0a5b000 ph data[2]=0:a0a5b000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:a0a54000 ph data[3]=0:a0a54000 (fff) get Phys(data[n=4+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:a0a55000 ph data[3]=0:a0a54000 (1fff) get Phys(data[n=4+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:a0a56000 ph data[3]=0:a0a54000 (2fff) get Phys(data[n=4+3000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:a0a57000 ph data[3]=0:a0a54000 (3fff) get Phys(data[n=4+4000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:a0a58000 ph data[3]=0:a0a54000 (4fff) get Phys(data[n=4+5000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:a0a59000 ph data[3]=0:a0a54000 (5fff) get Phys(data[n=4+6000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:a0a5a000 set TERM ph data[3]=0:a0a54000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5578 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396064e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396065e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396065e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:a0a63000 ph data[0]=0:a0a63000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:a0a5c000 ph data[1]=0:a0a5c000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:a0a5d000 ph data[1]=0:a0a5c000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:a0a5e000 ph data[1]=0:a0a5c000 (2fff) get Phys(data[n=2+3000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:a0a5f000 ph data[1]=0:a0a5c000 (3fff) get Phys(data[n=2+4000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:a0a60000 ph data[1]=0:a0a5c000 (4fff) get Phys(data[n=2+5000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:a0a61000 ph data[1]=0:a0a5c000 (5fff) get Phys(data[n=2+6000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:a0a62000 ph data[1]=0:a0a5c000 (6fff) get Phys(data[n=2+7000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:a0a6b000 ph data[2]=0:a0a6b000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:a0a64000 ph data[3]=0:a0a64000 (fff) get Phys(data[n=4+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:a0a65000 ph data[3]=0:a0a64000 (1fff) get Phys(data[n=4+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:a0a66000 ph data[3]=0:a0a64000 (2fff) get Phys(data[n=4+3000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:a0a67000 ph data[3]=0:a0a64000 (3fff) get Phys(data[n=4+4000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:a0a68000 ph data[3]=0:a0a64000 (4fff) get Phys(data[n=4+5000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:a0a69000 ph data[3]=0:a0a64000 (5fff) get Phys(data[n=4+6000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:a0a6a000 set TERM ph data[3]=0:a0a64000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606560, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08ad8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396065e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:a0a73000 ph data[0]=0:a0a73000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:a0a6c000 ph data[1]=0:a0a6c000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:a0a6d000 ph data[1]=0:a0a6c000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:a0a6e000 ph data[1]=0:a0a6c000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:a0a6f000 ph data[1]=0:a0a6c000 (3fff) get Phys(data[n=2+4000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:a0a70000 ph data[1]=0:a0a6c000 (4fff) get Phys(data[n=2+5000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:a0a71000 ph data[1]=0:a0a6c000 (5fff) get Phys(data[n=2+6000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:a0a72000 ph data[1]=0:a0a6c000 (6fff) get Phys(data[n=2+7000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:a0a7b000 ph data[2]=0:a0a7b000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:a0a74000 ph data[3]=0:a0a74000 (fff) get Phys(data[n=4+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:a0a75000 ph data[3]=0:a0a74000 (1fff) get Phys(data[n=4+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:a0a76000 ph data[3]=0:a0a74000 (2fff) get Phys(data[n=4+3000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:a0a77000 ph data[3]=0:a0a74000 (3fff) get Phys(data[n=4+4000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:a0a78000 ph data[3]=0:a0a74000 (4fff) get Phys(data[n=4+5000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:a0a79000 ph data[3]=0:a0a74000 (5fff) get Phys(data[n=4+6000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:a0a7a000 set TERM ph data[3]=0:a0a74000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396066e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396066e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:a0a83000 ph data[0]=0:a0a83000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:a0a7c000 ph data[1]=0:a0a7c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:a0a7d000 ph data[1]=0:a0a7c000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:a0a7e000 ph data[1]=0:a0a7c000 (2fff) get Phys(data[n=2+3000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:a0a7f000 ph data[1]=0:a0a7c000 (3fff) get Phys(data[n=2+4000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:a0a80000 ph data[1]=0:a0a7c000 (4fff) get Phys(data[n=2+5000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:a0a81000 ph data[1]=0:a0a7c000 (5fff) get Phys(data[n=2+6000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:a0a82000 ph data[1]=0:a0a7c000 (6fff) get Phys(data[n=2+7000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:a0a8b000 ph data[2]=0:a0a8b000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:a0a84000 ph data[3]=0:a0a84000 (fff) get Phys(data[n=4+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:a0a85000 ph data[3]=0:a0a84000 (1fff) get Phys(data[n=4+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:a0a86000 ph data[3]=0:a0a84000 (2fff) get Phys(data[n=4+3000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:a0a87000 ph data[3]=0:a0a84000 (3fff) get Phys(data[n=4+4000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:a0a88000 ph data[3]=0:a0a84000 (4fff) get Phys(data[n=4+5000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:a0a89000 ph data[3]=0:a0a84000 (5fff) get Phys(data[n=4+6000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:a0a8a000 set TERM ph data[3]=0:a0a84000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:a0a93000 ph data[0]=0:a0a93000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:a0a8c000 ph data[1]=0:a0a8c000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:a0a8d000 ph data[1]=0:a0a8c000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:a0a8e000 ph data[1]=0:a0a8c000 (2fff) get Phys(data[n=2+3000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:a0a8f000 ph data[1]=0:a0a8c000 (3fff) get Phys(data[n=2+4000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:a0a90000 ph data[1]=0:a0a8c000 (4fff) get Phys(data[n=2+5000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:a0a91000 ph data[1]=0:a0a8c000 (5fff) get Phys(data[n=2+6000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:a0a92000 ph data[1]=0:a0a8c000 (6fff) get Phys(data[n=2+7000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:a0a9b000 ph data[2]=0:a0a9b000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:a0a94000 ph data[3]=0:a0a94000 (fff) get Phys(data[n=4+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:a0a95000 ph data[3]=0:a0a94000 (1fff) get Phys(data[n=4+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:a0a96000 ph data[3]=0:a0a94000 (2fff) get Phys(data[n=4+3000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:a0a97000 ph data[3]=0:a0a94000 (3fff) get Phys(data[n=4+4000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:a0a98000 ph data[3]=0:a0a94000 (4fff) get Phys(data[n=4+5000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:a0a99000 ph data[3]=0:a0a94000 (5fff) get Phys(data[n=4+6000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:a0a9a000 set TERM ph data[3]=0:a0a94000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396066e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396067e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396067e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:a0aa3000 ph data[0]=0:a0aa3000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:a0a9c000 ph data[1]=0:a0a9c000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:a0a9d000 ph data[1]=0:a0a9c000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:a0a9e000 ph data[1]=0:a0a9c000 (2fff) get Phys(data[n=2+3000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:a0a9f000 ph data[1]=0:a0a9c000 (3fff) get Phys(data[n=2+4000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:a0aa0000 ph data[1]=0:a0a9c000 (4fff) get Phys(data[n=2+5000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:a0aa1000 ph data[1]=0:a0a9c000 (5fff) get Phys(data[n=2+6000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:a0aa2000 ph data[1]=0:a0a9c000 (6fff) get Phys(data[n=2+7000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:a0aab000 ph data[2]=0:a0aab000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:a0aa4000 ph data[3]=0:a0aa4000 (fff) get Phys(data[n=4+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:a0aa5000 ph data[3]=0:a0aa4000 (1fff) get Phys(data[n=4+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:a0aa6000 ph data[3]=0:a0aa4000 (2fff) get Phys(data[n=4+3000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:a0aa7000 ph data[3]=0:a0aa4000 (3fff) get Phys(data[n=4+4000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:a0aa8000 ph data[3]=0:a0aa4000 (4fff) get Phys(data[n=4+5000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:a0aa9000 ph data[3]=0:a0aa4000 (5fff) get Phys(data[n=4+6000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:a0aaa000 set TERM ph data[3]=0:a0aa4000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08928 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396067e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:9e393000 ph data[0]=0:9e393000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:9e38c000 ph data[1]=0:9e38c000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:9e38d000 ph data[1]=0:9e38c000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:9e38e000 ph data[1]=0:9e38c000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:9e38f000 ph data[1]=0:9e38c000 (3fff) get Phys(data[n=2+4000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:9e390000 ph data[1]=0:9e38c000 (4fff) get Phys(data[n=2+5000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:9e391000 ph data[1]=0:9e38c000 (5fff) get Phys(data[n=2+6000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:9e392000 ph data[1]=0:9e38c000 (6fff) get Phys(data[n=2+7000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:9e39b000 ph data[2]=0:9e39b000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:9e394000 ph data[3]=0:9e394000 (fff) get Phys(data[n=4+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:9e395000 ph data[3]=0:9e394000 (1fff) get Phys(data[n=4+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:9e396000 ph data[3]=0:9e394000 (2fff) get Phys(data[n=4+3000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:9e397000 ph data[3]=0:9e394000 (3fff) get Phys(data[n=4+4000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:9e398000 ph data[3]=0:9e394000 (4fff) get Phys(data[n=4+5000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:9e399000 ph data[3]=0:9e394000 (5fff) get Phys(data[n=4+6000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:9e39a000 set TERM ph data[3]=0:9e394000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396068e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396068e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:9e3a3000 ph data[0]=0:9e3a3000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:9e39c000 ph data[1]=0:9e39c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:9e39d000 ph data[1]=0:9e39c000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:9e39e000 ph data[1]=0:9e39c000 (2fff) get Phys(data[n=2+3000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:9e39f000 ph data[1]=0:9e39c000 (3fff) get Phys(data[n=2+4000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:9e3a0000 ph data[1]=0:9e39c000 (4fff) get Phys(data[n=2+5000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:9e3a1000 ph data[1]=0:9e39c000 (5fff) get Phys(data[n=2+6000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:9e3a2000 ph data[1]=0:9e39c000 (6fff) get Phys(data[n=2+7000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:9e3ab000 ph data[2]=0:9e3ab000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:9e3a4000 ph data[3]=0:9e3a4000 (fff) get Phys(data[n=4+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:9e3a5000 ph data[3]=0:9e3a4000 (1fff) get Phys(data[n=4+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:9e3a6000 ph data[3]=0:9e3a4000 (2fff) get Phys(data[n=4+3000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:9e3a7000 ph data[3]=0:9e3a4000 (3fff) get Phys(data[n=4+4000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:9e3a8000 ph data[3]=0:9e3a4000 (4fff) get Phys(data[n=4+5000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:9e3a9000 ph data[3]=0:9e3a4000 (5fff) get Phys(data[n=4+6000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:9e3aa000 set TERM ph data[3]=0:9e3a4000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:9e3b3000 ph data[0]=0:9e3b3000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:9e3ac000 ph data[1]=0:9e3ac000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:9e3ad000 ph data[1]=0:9e3ac000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:9e3ae000 ph data[1]=0:9e3ac000 (2fff) get Phys(data[n=2+3000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:9e3af000 ph data[1]=0:9e3ac000 (3fff) get Phys(data[n=2+4000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:9e3b0000 ph data[1]=0:9e3ac000 (4fff) get Phys(data[n=2+5000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:9e3b1000 ph data[1]=0:9e3ac000 (5fff) get Phys(data[n=2+6000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:9e3b2000 ph data[1]=0:9e3ac000 (6fff) get Phys(data[n=2+7000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:9e3bb000 ph data[2]=0:9e3bb000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:9e3b4000 ph data[3]=0:9e3b4000 (fff) get Phys(data[n=4+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:9e3b5000 ph data[3]=0:9e3b4000 (1fff) get Phys(data[n=4+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:9e3b6000 ph data[3]=0:9e3b4000 (2fff) get Phys(data[n=4+3000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:9e3b7000 ph data[3]=0:9e3b4000 (3fff) get Phys(data[n=4+4000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:9e3b8000 ph data[3]=0:9e3b4000 (4fff) get Phys(data[n=4+5000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:9e3b9000 ph data[3]=0:9e3b4000 (5fff) get Phys(data[n=4+6000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:9e3ba000 set TERM ph data[3]=0:9e3b4000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396068e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396069e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396069e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:9e3c3000 ph data[0]=0:9e3c3000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:9e3bc000 ph data[1]=0:9e3bc000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:9e3bd000 ph data[1]=0:9e3bc000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:9e3be000 ph data[1]=0:9e3bc000 (2fff) get Phys(data[n=2+3000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:9e3bf000 ph data[1]=0:9e3bc000 (3fff) get Phys(data[n=2+4000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:9e3c0000 ph data[1]=0:9e3bc000 (4fff) get Phys(data[n=2+5000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:9e3c1000 ph data[1]=0:9e3bc000 (5fff) get Phys(data[n=2+6000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:9e3c2000 ph data[1]=0:9e3bc000 (6fff) get Phys(data[n=2+7000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:9e3cb000 ph data[2]=0:9e3cb000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:9e3c4000 ph data[3]=0:9e3c4000 (fff) get Phys(data[n=4+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:9e3c5000 ph data[3]=0:9e3c4000 (1fff) get Phys(data[n=4+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:9e3c6000 ph data[3]=0:9e3c4000 (2fff) get Phys(data[n=4+3000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:9e3c7000 ph data[3]=0:9e3c4000 (3fff) get Phys(data[n=4+4000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:9e3c8000 ph data[3]=0:9e3c4000 (4fff) get Phys(data[n=4+5000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:9e3c9000 ph data[3]=0:9e3c4000 (5fff) get Phys(data[n=4+6000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:9e3ca000 set TERM ph data[3]=0:9e3c4000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b56ec ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08920 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396069e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606a60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606a60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:9e3d3000 ph data[0]=0:9e3d3000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:9e3cc000 ph data[1]=0:9e3cc000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:9e3cd000 ph data[1]=0:9e3cc000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:9e3ce000 ph data[1]=0:9e3cc000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:9e3cf000 ph data[1]=0:9e3cc000 (3fff) get Phys(data[n=2+4000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:9e3d0000 ph data[1]=0:9e3cc000 (4fff) get Phys(data[n=2+5000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:9e3d1000 ph data[1]=0:9e3cc000 (5fff) get Phys(data[n=2+6000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:9e3d2000 ph data[1]=0:9e3cc000 (6fff) get Phys(data[n=2+7000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:9e3db000 ph data[2]=0:9e3db000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:9e3d4000 ph data[3]=0:9e3d4000 (fff) get Phys(data[n=4+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:9e3d5000 ph data[3]=0:9e3d4000 (1fff) get Phys(data[n=4+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:9e3d6000 ph data[3]=0:9e3d4000 (2fff) get Phys(data[n=4+3000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:9e3d7000 ph data[3]=0:9e3d4000 (3fff) get Phys(data[n=4+4000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:9e3d8000 ph data[3]=0:9e3d4000 (4fff) get Phys(data[n=4+5000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:9e3d9000 ph data[3]=0:9e3d4000 (5fff) get Phys(data[n=4+6000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:9e3da000 set TERM ph data[3]=0:9e3d4000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606a60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606ae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606ae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:9e3e3000 ph data[0]=0:9e3e3000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:9e3dc000 ph data[1]=0:9e3dc000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:9e3dd000 ph data[1]=0:9e3dc000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:9e3de000 ph data[1]=0:9e3dc000 (2fff) get Phys(data[n=2+3000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:9e3df000 ph data[1]=0:9e3dc000 (3fff) get Phys(data[n=2+4000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:9e3e0000 ph data[1]=0:9e3dc000 (4fff) get Phys(data[n=2+5000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:9e3e1000 ph data[1]=0:9e3dc000 (5fff) get Phys(data[n=2+6000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:9e3e2000 ph data[1]=0:9e3dc000 (6fff) get Phys(data[n=2+7000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:9e3eb000 ph data[2]=0:9e3eb000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:9e3e4000 ph data[3]=0:9e3e4000 (fff) get Phys(data[n=4+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:9e3e5000 ph data[3]=0:9e3e4000 (1fff) get Phys(data[n=4+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:9e3e6000 ph data[3]=0:9e3e4000 (2fff) get Phys(data[n=4+3000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:9e3e7000 ph data[3]=0:9e3e4000 (3fff) get Phys(data[n=4+4000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:9e3e8000 ph data[3]=0:9e3e4000 (4fff) get Phys(data[n=4+5000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:9e3e9000 ph data[3]=0:9e3e4000 (5fff) get Phys(data[n=4+6000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:9e3ea000 set TERM ph data[3]=0:9e3e4000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606b60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606b60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:9e3f3000 ph data[0]=0:9e3f3000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:9e3ec000 ph data[1]=0:9e3ec000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:9e3ed000 ph data[1]=0:9e3ec000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:9e3ee000 ph data[1]=0:9e3ec000 (2fff) get Phys(data[n=2+3000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:9e3ef000 ph data[1]=0:9e3ec000 (3fff) get Phys(data[n=2+4000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:9e3f0000 ph data[1]=0:9e3ec000 (4fff) get Phys(data[n=2+5000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:9e3f1000 ph data[1]=0:9e3ec000 (5fff) get Phys(data[n=2+6000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:9e3f2000 ph data[1]=0:9e3ec000 (6fff) get Phys(data[n=2+7000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:9e3fb000 ph data[2]=0:9e3fb000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:9e3f4000 ph data[3]=0:9e3f4000 (fff) get Phys(data[n=4+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:9e3f5000 ph data[3]=0:9e3f4000 (1fff) get Phys(data[n=4+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:9e3f6000 ph data[3]=0:9e3f4000 (2fff) get Phys(data[n=4+3000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:9e3f7000 ph data[3]=0:9e3f4000 (3fff) get Phys(data[n=4+4000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:9e3f8000 ph data[3]=0:9e3f4000 (4fff) get Phys(data[n=4+5000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:9e3f9000 ph data[3]=0:9e3f4000 (5fff) get Phys(data[n=4+6000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:9e3fa000 set TERM ph data[3]=0:9e3f4000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606ae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606be0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606be0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:9e403000 ph data[0]=0:9e403000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:9e3fc000 ph data[1]=0:9e3fc000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:9e3fd000 ph data[1]=0:9e3fc000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:9e3fe000 ph data[1]=0:9e3fc000 (2fff) get Phys(data[n=2+3000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:9e3ff000 ph data[1]=0:9e3fc000 (3fff) get Phys(data[n=2+4000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:9e400000 ph data[1]=0:9e3fc000 (4fff) get Phys(data[n=2+5000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:9e401000 ph data[1]=0:9e3fc000 (5fff) get Phys(data[n=2+6000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:9e402000 ph data[1]=0:9e3fc000 (6fff) get Phys(data[n=2+7000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:9e40b000 ph data[2]=0:9e40b000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:9e404000 ph data[3]=0:9e404000 (fff) get Phys(data[n=4+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:9e405000 ph data[3]=0:9e404000 (1fff) get Phys(data[n=4+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:9e406000 ph data[3]=0:9e404000 (2fff) get Phys(data[n=4+3000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:9e407000 ph data[3]=0:9e404000 (3fff) get Phys(data[n=4+4000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:9e408000 ph data[3]=0:9e404000 (4fff) get Phys(data[n=4+5000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:9e409000 ph data[3]=0:9e404000 (5fff) get Phys(data[n=4+6000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:9e40a000 set TERM ph data[3]=0:9e404000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606b60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08920 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606be0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606c60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606c60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:97323000 ph data[0]=0:97323000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:97324000 ph data[0]=0:97323000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:97325000 ph data[0]=0:97323000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:9731e000 ph data[1]=0:9731e000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:9731f000 ph data[1]=0:9731e000 (1fff) get Phys(data[n=2+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:97320000 ph data[1]=0:9731e000 (2fff) get Phys(data[n=2+3000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:97321000 ph data[1]=0:9731e000 (3fff) get Phys(data[n=2+4000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:97322000 ph data[1]=0:9731e000 (4fff) get Phys(data[n=2+5000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:9732b000 ph data[2]=0:9732b000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:9732c000 ph data[2]=0:9732b000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:9732d000 ph data[2]=0:9732b000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:97326000 ph data[3]=0:97326000 (fff) get Phys(data[n=4+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:97327000 ph data[3]=0:97326000 (1fff) get Phys(data[n=4+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:97328000 ph data[3]=0:97326000 (2fff) get Phys(data[n=4+3000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:97329000 ph data[3]=0:97326000 (3fff) get Phys(data[n=4+4000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:9732a000 set TERM ph data[3]=0:97326000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606c60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606ce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606ce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:97333000 ph data[0]=0:97333000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:97334000 ph data[0]=0:97333000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:97335000 ph data[0]=0:97333000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:9732e000 ph data[1]=0:9732e000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:9732f000 ph data[1]=0:9732e000 (1fff) get Phys(data[n=2+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:97330000 ph data[1]=0:9732e000 (2fff) get Phys(data[n=2+3000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:97331000 ph data[1]=0:9732e000 (3fff) get Phys(data[n=2+4000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:97332000 ph data[1]=0:9732e000 (4fff) get Phys(data[n=2+5000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:9733b000 ph data[2]=0:9733b000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:9733c000 ph data[2]=0:9733b000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:9733d000 ph data[2]=0:9733b000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:97336000 ph data[3]=0:97336000 (fff) get Phys(data[n=4+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:97337000 ph data[3]=0:97336000 (1fff) get Phys(data[n=4+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:97338000 ph data[3]=0:97336000 (2fff) get Phys(data[n=4+3000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:97339000 ph data[3]=0:97336000 (3fff) get Phys(data[n=4+4000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:9733a000 set TERM ph data[3]=0:97336000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606d60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606d60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:97343000 ph data[0]=0:97343000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:97344000 ph data[0]=0:97343000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:97345000 ph data[0]=0:97343000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:9733e000 ph data[1]=0:9733e000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:9733f000 ph data[1]=0:9733e000 (1fff) get Phys(data[n=2+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:97340000 ph data[1]=0:9733e000 (2fff) get Phys(data[n=2+3000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:97341000 ph data[1]=0:9733e000 (3fff) get Phys(data[n=2+4000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:97342000 ph data[1]=0:9733e000 (4fff) get Phys(data[n=2+5000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:9734b000 ph data[2]=0:9734b000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:9734c000 ph data[2]=0:9734b000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:9734d000 ph data[2]=0:9734b000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:97346000 ph data[3]=0:97346000 (fff) get Phys(data[n=4+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:97347000 ph data[3]=0:97346000 (1fff) get Phys(data[n=4+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:97348000 ph data[3]=0:97346000 (2fff) get Phys(data[n=4+3000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:97349000 ph data[3]=0:97346000 (3fff) get Phys(data[n=4+4000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:9734a000 set TERM ph data[3]=0:97346000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606ce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606de0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606de0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:97353000 ph data[0]=0:97353000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:97354000 ph data[0]=0:97353000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:97355000 ph data[0]=0:97353000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:9734e000 ph data[1]=0:9734e000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:9734f000 ph data[1]=0:9734e000 (1fff) get Phys(data[n=2+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:97350000 ph data[1]=0:9734e000 (2fff) get Phys(data[n=2+3000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:97351000 ph data[1]=0:9734e000 (3fff) get Phys(data[n=2+4000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:97352000 ph data[1]=0:9734e000 (4fff) get Phys(data[n=2+5000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:9735b000 ph data[2]=0:9735b000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:9735c000 ph data[2]=0:9735b000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:9735d000 ph data[2]=0:9735b000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:97356000 ph data[3]=0:97356000 (fff) get Phys(data[n=4+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:97357000 ph data[3]=0:97356000 (1fff) get Phys(data[n=4+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:97358000 ph data[3]=0:97356000 (2fff) get Phys(data[n=4+3000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:97359000 ph data[3]=0:97356000 (3fff) get Phys(data[n=4+4000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:9735a000 set TERM ph data[3]=0:97356000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606d60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08920 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606de0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606e60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606e60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:97363000 ph data[0]=0:97363000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:97364000 ph data[0]=0:97363000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:97365000 ph data[0]=0:97363000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:9735e000 ph data[1]=0:9735e000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:9735f000 ph data[1]=0:9735e000 (1fff) get Phys(data[n=2+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:97360000 ph data[1]=0:9735e000 (2fff) get Phys(data[n=2+3000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:97361000 ph data[1]=0:9735e000 (3fff) get Phys(data[n=2+4000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:97362000 ph data[1]=0:9735e000 (4fff) get Phys(data[n=2+5000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:9736b000 ph data[2]=0:9736b000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:9736c000 ph data[2]=0:9736b000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:9736d000 ph data[2]=0:9736b000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:97366000 ph data[3]=0:97366000 (fff) get Phys(data[n=4+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:97367000 ph data[3]=0:97366000 (1fff) get Phys(data[n=4+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:97368000 ph data[3]=0:97366000 (2fff) get Phys(data[n=4+3000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:97369000 ph data[3]=0:97366000 (3fff) get Phys(data[n=4+4000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:9736a000 set TERM ph data[3]=0:97366000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606e60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606ee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606ee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:97373000 ph data[0]=0:97373000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:97374000 ph data[0]=0:97373000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:97375000 ph data[0]=0:97373000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:9736e000 ph data[1]=0:9736e000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:9736f000 ph data[1]=0:9736e000 (1fff) get Phys(data[n=2+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:97370000 ph data[1]=0:9736e000 (2fff) get Phys(data[n=2+3000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:97371000 ph data[1]=0:9736e000 (3fff) get Phys(data[n=2+4000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:97372000 ph data[1]=0:9736e000 (4fff) get Phys(data[n=2+5000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:9737b000 ph data[2]=0:9737b000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:9737c000 ph data[2]=0:9737b000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:9737d000 ph data[2]=0:9737b000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:97376000 ph data[3]=0:97376000 (fff) get Phys(data[n=4+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:97377000 ph data[3]=0:97376000 (1fff) get Phys(data[n=4+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:97378000 ph data[3]=0:97376000 (2fff) get Phys(data[n=4+3000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:97379000 ph data[3]=0:97376000 (3fff) get Phys(data[n=4+4000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:9737a000 set TERM ph data[3]=0:97376000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55bc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606ee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606f60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606f60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:97383000 ph data[0]=0:97383000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:97384000 ph data[0]=0:97383000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:97385000 ph data[0]=0:97383000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:9737e000 ph data[1]=0:9737e000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:9737f000 ph data[1]=0:9737e000 (1fff) get Phys(data[n=2+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:97380000 ph data[1]=0:9737e000 (2fff) get Phys(data[n=2+3000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:97381000 ph data[1]=0:9737e000 (3fff) get Phys(data[n=2+4000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:97382000 ph data[1]=0:9737e000 (4fff) get Phys(data[n=2+5000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:9738b000 ph data[2]=0:9738b000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:9738c000 ph data[2]=0:9738b000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:9738d000 ph data[2]=0:9738b000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:97386000 ph data[3]=0:97386000 (fff) get Phys(data[n=4+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:97387000 ph data[3]=0:97386000 (1fff) get Phys(data[n=4+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:97388000 ph data[3]=0:97386000 (2fff) get Phys(data[n=4+3000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:97389000 ph data[3]=0:97386000 (3fff) get Phys(data[n=4+4000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:9738a000 set TERM ph data[3]=0:97386000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606f60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39606fe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39606fe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:97393000 ph data[0]=0:97393000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:97394000 ph data[0]=0:97393000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:97395000 ph data[0]=0:97393000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:9738e000 ph data[1]=0:9738e000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:9738f000 ph data[1]=0:9738e000 (1fff) get Phys(data[n=2+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:97390000 ph data[1]=0:9738e000 (2fff) get Phys(data[n=2+3000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:97391000 ph data[1]=0:9738e000 (3fff) get Phys(data[n=2+4000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:97392000 ph data[1]=0:9738e000 (4fff) get Phys(data[n=2+5000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:9739b000 ph data[2]=0:9739b000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:9739c000 ph data[2]=0:9739b000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:9739d000 ph data[2]=0:9739b000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:97396000 ph data[3]=0:97396000 (fff) get Phys(data[n=4+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:97397000 ph data[3]=0:97396000 (1fff) get Phys(data[n=4+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:97398000 ph data[3]=0:97396000 (2fff) get Phys(data[n=4+3000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:97399000 ph data[3]=0:97396000 (3fff) get Phys(data[n=4+4000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:9739a000 set TERM ph data[3]=0:97396000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39606fe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:94fd3000 ph data[0]=0:94fd3000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:94fd4000 ph data[0]=0:94fd3000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:94fd5000 ph data[0]=0:94fd3000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:94fce000 ph data[1]=0:94fce000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:94fcf000 ph data[1]=0:94fce000 (1fff) get Phys(data[n=2+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:94fd0000 ph data[1]=0:94fce000 (2fff) get Phys(data[n=2+3000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:94fd1000 ph data[1]=0:94fce000 (3fff) get Phys(data[n=2+4000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:94fd2000 ph data[1]=0:94fce000 (4fff) get Phys(data[n=2+5000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:94fdb000 ph data[2]=0:94fdb000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:94fdc000 ph data[2]=0:94fdb000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:94fdd000 ph data[2]=0:94fdb000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:94fd6000 ph data[3]=0:94fd6000 (fff) get Phys(data[n=4+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:94fd7000 ph data[3]=0:94fd6000 (1fff) get Phys(data[n=4+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:94fd8000 ph data[3]=0:94fd6000 (2fff) get Phys(data[n=4+3000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:94fd9000 ph data[3]=0:94fd6000 (3fff) get Phys(data[n=4+4000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:94fda000 set TERM ph data[3]=0:94fd6000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396070e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396070e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:94fe3000 ph data[0]=0:94fe3000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:94fe4000 ph data[0]=0:94fe3000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:94fe5000 ph data[0]=0:94fe3000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:94fde000 ph data[1]=0:94fde000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:94fdf000 ph data[1]=0:94fde000 (1fff) get Phys(data[n=2+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:94fe0000 ph data[1]=0:94fde000 (2fff) get Phys(data[n=2+3000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:94fe1000 ph data[1]=0:94fde000 (3fff) get Phys(data[n=2+4000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:94fe2000 ph data[1]=0:94fde000 (4fff) get Phys(data[n=2+5000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:94feb000 ph data[2]=0:94feb000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:94fec000 ph data[2]=0:94feb000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:94fed000 ph data[2]=0:94feb000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:94fe6000 ph data[3]=0:94fe6000 (fff) get Phys(data[n=4+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:94fe7000 ph data[3]=0:94fe6000 (1fff) get Phys(data[n=4+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:94fe8000 ph data[3]=0:94fe6000 (2fff) get Phys(data[n=4+3000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:94fe9000 ph data[3]=0:94fe6000 (3fff) get Phys(data[n=4+4000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:94fea000 set TERM ph data[3]=0:94fe6000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:94ff3000 ph data[0]=0:94ff3000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:94ff4000 ph data[0]=0:94ff3000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:94ff5000 ph data[0]=0:94ff3000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:94fee000 ph data[1]=0:94fee000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:94fef000 ph data[1]=0:94fee000 (1fff) get Phys(data[n=2+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:94ff0000 ph data[1]=0:94fee000 (2fff) get Phys(data[n=2+3000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:94ff1000 ph data[1]=0:94fee000 (3fff) get Phys(data[n=2+4000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:94ff2000 ph data[1]=0:94fee000 (4fff) get Phys(data[n=2+5000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:94ffb000 ph data[2]=0:94ffb000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:94ffc000 ph data[2]=0:94ffb000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:94ffd000 ph data[2]=0:94ffb000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:94ff6000 ph data[3]=0:94ff6000 (fff) get Phys(data[n=4+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:94ff7000 ph data[3]=0:94ff6000 (1fff) get Phys(data[n=4+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:94ff8000 ph data[3]=0:94ff6000 (2fff) get Phys(data[n=4+3000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:94ff9000 ph data[3]=0:94ff6000 (3fff) get Phys(data[n=4+4000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:94ffa000 set TERM ph data[3]=0:94ff6000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55c8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396070e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396071e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396071e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:95003000 ph data[0]=0:95003000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:95004000 ph data[0]=0:95003000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:95005000 ph data[0]=0:95003000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:94ffe000 ph data[1]=0:94ffe000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:94fff000 ph data[1]=0:94ffe000 (1fff) get Phys(data[n=2+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:95000000 ph data[1]=0:94ffe000 (2fff) get Phys(data[n=2+3000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:95001000 ph data[1]=0:94ffe000 (3fff) get Phys(data[n=2+4000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:95002000 ph data[1]=0:94ffe000 (4fff) get Phys(data[n=2+5000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:9500b000 ph data[2]=0:9500b000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:9500c000 ph data[2]=0:9500b000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:9500d000 ph data[2]=0:9500b000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:95006000 ph data[3]=0:95006000 (fff) get Phys(data[n=4+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:95007000 ph data[3]=0:95006000 (1fff) get Phys(data[n=4+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:95008000 ph data[3]=0:95006000 (2fff) get Phys(data[n=4+3000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:95009000 ph data[3]=0:95006000 (3fff) get Phys(data[n=4+4000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:9500a000 set TERM ph data[3]=0:95006000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607160, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c24 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396071e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:95013000 ph data[0]=0:95013000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:95015000 ph data[1]=0:95015000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:9500e000 ph data[2]=0:9500e000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:9500f000 ph data[2]=0:9500e000 (1fff) get Phys(data[n=3+2000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:95010000 ph data[2]=0:9500e000 (2fff) get Phys(data[n=3+3000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:95011000 ph data[2]=0:9500e000 (3fff) get Phys(data[n=3+4000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:95012000 ph data[2]=0:9500e000 (4fff) get Phys(data[n=3+5000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:9501b000 ph data[3]=0:9501b000 (fff) get Phys(data[n=4+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:9501c000 ph data[3]=0:9501b000 (1fff) get Phys(data[n=4+2000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:9501d000 ph data[3]=0:9501b000 (2fff) get Phys(data[n=4+3000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:95016000 ph data[4]=0:95016000 (fff) get Phys(data[n=5+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:95017000 ph data[4]=0:95016000 (1fff) get Phys(data[n=5+2000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:95018000 ph data[4]=0:95016000 (2fff) get Phys(data[n=5+3000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:95019000 ph data[4]=0:95016000 (3fff) get Phys(data[n=5+4000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:9501a000 ph data[4]=0:95016000 (4fff) get Phys(data[n=5+5000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:95023000 set TERM ph data[5]=0:95023000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607260, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x6, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396072e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396072e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:95024000 ph data[0]=0:95024000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:95025000 ph data[0]=0:95024000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:9501e000 ph data[1]=0:9501e000 (fff) get Phys(data[n=2+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:9501f000 ph data[1]=0:9501e000 (1fff) get Phys(data[n=2+2000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:95020000 ph data[1]=0:9501e000 (2fff) get Phys(data[n=2+3000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:95021000 ph data[1]=0:9501e000 (3fff) get Phys(data[n=2+4000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:95022000 ph data[1]=0:9501e000 (4fff) get Phys(data[n=2+5000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:9502b000 ph data[2]=0:9502b000 (fff) get Phys(data[n=3+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:9502c000 ph data[2]=0:9502b000 (1fff) get Phys(data[n=3+2000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:9502d000 ph data[2]=0:9502b000 (2fff) get Phys(data[n=3+3000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:95026000 ph data[3]=0:95026000 (fff) get Phys(data[n=4+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:95027000 ph data[3]=0:95026000 (1fff) get Phys(data[n=4+2000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:95028000 ph data[3]=0:95026000 (2fff) get Phys(data[n=4+3000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:95029000 ph data[3]=0:95026000 (3fff) get Phys(data[n=4+4000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:9502a000 ph data[3]=0:95026000 (4fff) get Phys(data[n=4+5000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:95033000 set TERM ph data[4]=0:95033000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607360, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607360, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:95034000 ph data[0]=0:95034000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:95035000 ph data[0]=0:95034000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:9502e000 ph data[1]=0:9502e000 (fff) get Phys(data[n=2+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:9502f000 ph data[1]=0:9502e000 (1fff) get Phys(data[n=2+2000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:95030000 ph data[1]=0:9502e000 (2fff) get Phys(data[n=2+3000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:95031000 ph data[1]=0:9502e000 (3fff) get Phys(data[n=2+4000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:95032000 ph data[1]=0:9502e000 (4fff) get Phys(data[n=2+5000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:9503b000 ph data[2]=0:9503b000 (fff) get Phys(data[n=3+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:9503c000 ph data[2]=0:9503b000 (1fff) get Phys(data[n=3+2000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:9503d000 ph data[2]=0:9503b000 (2fff) get Phys(data[n=3+3000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:95036000 ph data[3]=0:95036000 (fff) get Phys(data[n=4+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:95037000 ph data[3]=0:95036000 (1fff) get Phys(data[n=4+2000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:95038000 ph data[3]=0:95036000 (2fff) get Phys(data[n=4+3000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:95039000 ph data[3]=0:95036000 (3fff) get Phys(data[n=4+4000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:9503a000 ph data[3]=0:95036000 (4fff) get Phys(data[n=4+5000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:95043000 set TERM ph data[4]=0:95043000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396072e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x5, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396073e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396073e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:95044000 ph data[0]=0:95044000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:95045000 ph data[0]=0:95044000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:9503e000 ph data[1]=0:9503e000 (fff) get Phys(data[n=2+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:9503f000 ph data[1]=0:9503e000 (1fff) get Phys(data[n=2+2000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:95040000 ph data[1]=0:9503e000 (2fff) get Phys(data[n=2+3000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:95041000 ph data[1]=0:9503e000 (3fff) get Phys(data[n=2+4000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:95042000 ph data[1]=0:9503e000 (4fff) get Phys(data[n=2+5000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:9504b000 ph data[2]=0:9504b000 (fff) get Phys(data[n=3+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:9504c000 ph data[2]=0:9504b000 (1fff) get Phys(data[n=3+2000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:9504d000 ph data[2]=0:9504b000 (2fff) get Phys(data[n=3+3000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:95046000 ph data[3]=0:95046000 (fff) get Phys(data[n=4+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:95047000 ph data[3]=0:95046000 (1fff) get Phys(data[n=4+2000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:95048000 ph data[3]=0:95046000 (2fff) get Phys(data[n=4+3000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:95049000 ph data[3]=0:95046000 (3fff) get Phys(data[n=4+4000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:9504a000 ph data[3]=0:95046000 (4fff) get Phys(data[n=4+5000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:95053000 set TERM ph data[4]=0:95053000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607360, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x5, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08c88 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396073e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x5, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960dc60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dc60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b14000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0c178000 ph data[0]=0:c178000 (fff) get Phys(data[n=1+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0c069000 ph data[1]=0:c069000 (fff) get Phys(data[n=2+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c0a2000 ph data[2]=0:c0a2000 (fff) get Phys(data[n=3+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0c08b000 ph data[3]=0:c08b000 (fff) get Phys(data[n=4+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c0b4000 ph data[4]=0:c0b4000 (fff) get Phys(data[n=5+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0c095000 ph data[5]=0:c095000 (fff) get Phys(data[n=6+1000]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0c126000 ph data[6]=0:c126000 (fff) get Phys(data[n=7+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0c0b7000 ph data[7]=0:c0b7000 (fff) get Phys(data[n=8+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0c180000 ph data[8]=0:c180000 (fff) get Phys(data[n=9+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0c071000 ph data[9]=0:c071000 (fff) get Phys(data[n=10+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0c0aa000 ph data[10]=0:c0aa000 (fff) get Phys(data[n=11+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0c093000 ph data[11]=0:c093000 (fff) get Phys(data[n=12+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0c0bc000 ph data[12]=0:c0bc000 (fff) get Phys(data[n=13+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0c09d000 ph data[13]=0:c09d000 (fff) get Phys(data[n=14+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0c12e000 ph data[14]=0:c12e000 (fff) get Phys(data[n=15+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0c0bf000 set TERM ph data[15]=0:c0bf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dc60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960dce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b24000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0c188000 ph data[0]=0:c188000 (fff) get Phys(data[n=1+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0c079000 ph data[1]=0:c079000 (fff) get Phys(data[n=2+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c0b2000 ph data[2]=0:c0b2000 (fff) get Phys(data[n=3+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0c09b000 ph data[3]=0:c09b000 (fff) get Phys(data[n=4+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c0c4000 ph data[4]=0:c0c4000 (fff) get Phys(data[n=5+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0c0a5000 ph data[5]=0:c0a5000 (fff) get Phys(data[n=6+1000]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0c136000 ph data[6]=0:c136000 (fff) get Phys(data[n=7+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0c0c7000 ph data[7]=0:c0c7000 (fff) get Phys(data[n=8+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0c190000 ph data[8]=0:c190000 (fff) get Phys(data[n=9+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0c081000 ph data[9]=0:c081000 (fff) get Phys(data[n=10+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c0ba000 ph data[10]=0:c0ba000 (fff) get Phys(data[n=11+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0c0a3000 ph data[11]=0:c0a3000 (fff) get Phys(data[n=12+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c0cc000 ph data[12]=0:c0cc000 (fff) get Phys(data[n=13+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0c0ad000 ph data[13]=0:c0ad000 (fff) get Phys(data[n=14+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0c13e000 ph data[14]=0:c13e000 (fff) get Phys(data[n=15+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0c0cf000 set TERM ph data[15]=0:c0cf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960dd60, OrigWordsRequested 0x2600, DevSize 0x26 IdeReadWrite (REQ): Starting sector is 3960dd60, Number of WORDS 0x2600, DevSize 0x26 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b34000, count 4c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0c198000 ph data[0]=0:c198000 (fff) get Phys(data[n=1+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0c089000 ph data[1]=0:c089000 (fff) get Phys(data[n=2+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c0c2000 ph data[2]=0:c0c2000 (fff) get Phys(data[n=3+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0c0ab000 ph data[3]=0:c0ab000 (fff) get Phys(data[n=4+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0c0d4000 set TERM ph data[4]=0:c0d4000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b68a78 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dce0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b689ac ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dd60, Count 0x26(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x5, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2600, WordsLeft 2600 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4c00, full size 4c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:9114c000 ph data[0]=0:9114c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:9114d000 ph data[0]=0:9114c000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:9114e000 ph data[0]=0:9114c000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:91147000 ph data[1]=0:91147000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:91148000 ph data[1]=0:91147000 (1fff) get Phys(data[n=2+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:91149000 ph data[1]=0:91147000 (2fff) get Phys(data[n=2+3000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:9114a000 ph data[1]=0:91147000 (3fff) get Phys(data[n=2+4000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:9114b000 ph data[1]=0:91147000 (4fff) get Phys(data[n=2+5000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:91154000 ph data[2]=0:91154000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:91155000 ph data[2]=0:91154000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:91156000 ph data[2]=0:91154000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:9114f000 ph data[3]=0:9114f000 (fff) get Phys(data[n=4+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:91150000 ph data[3]=0:9114f000 (1fff) get Phys(data[n=4+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:91151000 ph data[3]=0:9114f000 (2fff) get Phys(data[n=4+3000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:91152000 ph data[3]=0:9114f000 (3fff) get Phys(data[n=4+4000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:91153000 set TERM ph data[3]=0:9114f000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607460, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396074e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396074e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:9115c000 ph data[0]=0:9115c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:9115d000 ph data[0]=0:9115c000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:9115e000 ph data[0]=0:9115c000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:91157000 ph data[1]=0:91157000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:91158000 ph data[1]=0:91157000 (1fff) get Phys(data[n=2+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:91159000 ph data[1]=0:91157000 (2fff) get Phys(data[n=2+3000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:9115a000 ph data[1]=0:91157000 (3fff) get Phys(data[n=2+4000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:9115b000 ph data[1]=0:91157000 (4fff) get Phys(data[n=2+5000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:91164000 ph data[2]=0:91164000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:91165000 ph data[2]=0:91164000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:91166000 ph data[2]=0:91164000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:9115f000 ph data[3]=0:9115f000 (fff) get Phys(data[n=4+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:91160000 ph data[3]=0:9115f000 (1fff) get Phys(data[n=4+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:91161000 ph data[3]=0:9115f000 (2fff) get Phys(data[n=4+3000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:91162000 ph data[3]=0:9115f000 (3fff) get Phys(data[n=4+4000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:91163000 set TERM ph data[3]=0:9115f000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:9116c000 ph data[0]=0:9116c000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:9116d000 ph data[0]=0:9116c000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:9116e000 ph data[0]=0:9116c000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:91167000 ph data[1]=0:91167000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:91168000 ph data[1]=0:91167000 (1fff) get Phys(data[n=2+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:91169000 ph data[1]=0:91167000 (2fff) get Phys(data[n=2+3000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:9116a000 ph data[1]=0:91167000 (3fff) get Phys(data[n=2+4000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:9116b000 ph data[1]=0:91167000 (4fff) get Phys(data[n=2+5000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:91174000 ph data[2]=0:91174000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:91175000 ph data[2]=0:91174000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:91176000 ph data[2]=0:91174000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:9116f000 ph data[3]=0:9116f000 (fff) get Phys(data[n=4+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:91170000 ph data[3]=0:9116f000 (1fff) get Phys(data[n=4+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:91171000 ph data[3]=0:9116f000 (2fff) get Phys(data[n=4+3000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:91172000 ph data[3]=0:9116f000 (3fff) get Phys(data[n=4+4000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:91173000 set TERM ph data[3]=0:9116f000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396075e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396075e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:9117c000 ph data[0]=0:9117c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:9117d000 ph data[0]=0:9117c000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:9117e000 ph data[0]=0:9117c000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:91177000 ph data[1]=0:91177000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:91178000 ph data[1]=0:91177000 (1fff) get Phys(data[n=2+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:91179000 ph data[1]=0:91177000 (2fff) get Phys(data[n=2+3000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:9117a000 ph data[1]=0:91177000 (3fff) get Phys(data[n=2+4000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:9117b000 ph data[1]=0:91177000 (4fff) get Phys(data[n=2+5000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:91184000 ph data[2]=0:91184000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:91185000 ph data[2]=0:91184000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:91186000 ph data[2]=0:91184000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:9117f000 ph data[3]=0:9117f000 (fff) get Phys(data[n=4+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:91180000 ph data[3]=0:9117f000 (1fff) get Phys(data[n=4+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:91181000 ph data[3]=0:9117f000 (2fff) get Phys(data[n=4+3000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:91182000 ph data[3]=0:9117f000 (3fff) get Phys(data[n=4+4000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:91183000 set TERM ph data[3]=0:9117f000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396074e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607560, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396075e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:9118c000 ph data[0]=0:9118c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:9118d000 ph data[0]=0:9118c000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:9118e000 ph data[0]=0:9118c000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:91187000 ph data[1]=0:91187000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:91188000 ph data[1]=0:91187000 (1fff) get Phys(data[n=2+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:91189000 ph data[1]=0:91187000 (2fff) get Phys(data[n=2+3000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:9118a000 ph data[1]=0:91187000 (3fff) get Phys(data[n=2+4000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:9118b000 ph data[1]=0:91187000 (4fff) get Phys(data[n=2+5000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:91194000 ph data[2]=0:91194000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:91195000 ph data[2]=0:91194000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:91196000 ph data[2]=0:91194000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:9118f000 ph data[3]=0:9118f000 (fff) get Phys(data[n=4+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:91190000 ph data[3]=0:9118f000 (1fff) get Phys(data[n=4+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:91191000 ph data[3]=0:9118f000 (2fff) get Phys(data[n=4+3000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:91192000 ph data[3]=0:9118f000 (3fff) get Phys(data[n=4+4000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:91193000 set TERM ph data[3]=0:9118f000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396076e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396076e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:9119c000 ph data[0]=0:9119c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:9119d000 ph data[0]=0:9119c000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:9119e000 ph data[0]=0:9119c000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:91197000 ph data[1]=0:91197000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:91198000 ph data[1]=0:91197000 (1fff) get Phys(data[n=2+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:91199000 ph data[1]=0:91197000 (2fff) get Phys(data[n=2+3000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:9119a000 ph data[1]=0:91197000 (3fff) get Phys(data[n=2+4000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:9119b000 ph data[1]=0:91197000 (4fff) get Phys(data[n=2+5000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:911a4000 ph data[2]=0:911a4000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:911a5000 ph data[2]=0:911a4000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:911a6000 ph data[2]=0:911a4000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:9119f000 ph data[3]=0:9119f000 (fff) get Phys(data[n=4+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:911a0000 ph data[3]=0:9119f000 (1fff) get Phys(data[n=4+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:911a1000 ph data[3]=0:9119f000 (2fff) get Phys(data[n=4+3000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:911a2000 ph data[3]=0:9119f000 (3fff) get Phys(data[n=4+4000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:911a3000 set TERM ph data[3]=0:9119f000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:911ac000 ph data[0]=0:911ac000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:911ad000 ph data[0]=0:911ac000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:911ae000 ph data[0]=0:911ac000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:911a7000 ph data[1]=0:911a7000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:911a8000 ph data[1]=0:911a7000 (1fff) get Phys(data[n=2+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:911a9000 ph data[1]=0:911a7000 (2fff) get Phys(data[n=2+3000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:911aa000 ph data[1]=0:911a7000 (3fff) get Phys(data[n=2+4000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:911ab000 ph data[1]=0:911a7000 (4fff) get Phys(data[n=2+5000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:911b4000 ph data[2]=0:911b4000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:911b5000 ph data[2]=0:911b4000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:911b6000 ph data[2]=0:911b4000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:911af000 ph data[3]=0:911af000 (fff) get Phys(data[n=4+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:911b0000 ph data[3]=0:911af000 (1fff) get Phys(data[n=4+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:911b1000 ph data[3]=0:911af000 (2fff) get Phys(data[n=4+3000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:911b2000 ph data[3]=0:911af000 (3fff) get Phys(data[n=4+4000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:911b3000 set TERM ph data[3]=0:911af000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396076e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396077e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396077e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:911bc000 ph data[0]=0:911bc000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:911bd000 ph data[0]=0:911bc000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:911be000 ph data[0]=0:911bc000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:911b7000 ph data[1]=0:911b7000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:911b8000 ph data[1]=0:911b7000 (1fff) get Phys(data[n=2+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:911b9000 ph data[1]=0:911b7000 (2fff) get Phys(data[n=2+3000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:911ba000 ph data[1]=0:911b7000 (3fff) get Phys(data[n=2+4000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:911bb000 ph data[1]=0:911b7000 (4fff) get Phys(data[n=2+5000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:911c4000 ph data[2]=0:911c4000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:911c5000 ph data[2]=0:911c4000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:911c6000 ph data[2]=0:911c4000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:911bf000 ph data[3]=0:911bf000 (fff) get Phys(data[n=4+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:911c0000 ph data[3]=0:911bf000 (1fff) get Phys(data[n=4+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:911c1000 ph data[3]=0:911bf000 (2fff) get Phys(data[n=4+3000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:911c2000 ph data[3]=0:911bf000 (3fff) get Phys(data[n=4+4000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:911c3000 set TERM ph data[3]=0:911bf000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55e4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396077e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:8c5c4000 ph data[0]=0:8c5c4000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:8c5c5000 ph data[0]=0:8c5c4000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:8c5c6000 ph data[0]=0:8c5c4000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:8c5c7000 ph data[0]=0:8c5c4000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:8c5c8000 ph data[0]=0:8c5c4000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:8c5c9000 ph data[0]=0:8c5c4000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:8c5ca000 ph data[0]=0:8c5c4000 (6fff) get Phys(data[n=1+7000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:8c5c3000 ph data[1]=0:8c5c3000 (fff) get Phys(data[n=2+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:8c5cc000 ph data[2]=0:8c5cc000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:8c5cd000 ph data[2]=0:8c5cc000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:8c5ce000 ph data[2]=0:8c5cc000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:8c5cf000 ph data[2]=0:8c5cc000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:8c5d0000 ph data[2]=0:8c5cc000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:8c5d1000 ph data[2]=0:8c5cc000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:8c5d2000 ph data[2]=0:8c5cc000 (6fff) get Phys(data[n=3+7000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:8c5cb000 set TERM ph data[3]=0:8c5cb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396078e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396078e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:8c5d4000 ph data[0]=0:8c5d4000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:8c5d5000 ph data[0]=0:8c5d4000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:8c5d6000 ph data[0]=0:8c5d4000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:8c5d7000 ph data[0]=0:8c5d4000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:8c5d8000 ph data[0]=0:8c5d4000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:8c5d9000 ph data[0]=0:8c5d4000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:8c5da000 ph data[0]=0:8c5d4000 (6fff) get Phys(data[n=1+7000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:8c5d3000 ph data[1]=0:8c5d3000 (fff) get Phys(data[n=2+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:8c5dc000 ph data[2]=0:8c5dc000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:8c5dd000 ph data[2]=0:8c5dc000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:8c5de000 ph data[2]=0:8c5dc000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:8c5df000 ph data[2]=0:8c5dc000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:8c5e0000 ph data[2]=0:8c5dc000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:8c5e1000 ph data[2]=0:8c5dc000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:8c5e2000 ph data[2]=0:8c5dc000 (6fff) get Phys(data[n=3+7000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:8c5db000 set TERM ph data[3]=0:8c5db000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:8c5e4000 ph data[0]=0:8c5e4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:8c5e5000 ph data[0]=0:8c5e4000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:8c5e6000 ph data[0]=0:8c5e4000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:8c5e7000 ph data[0]=0:8c5e4000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:8c5e8000 ph data[0]=0:8c5e4000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:8c5e9000 ph data[0]=0:8c5e4000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:8c5ea000 ph data[0]=0:8c5e4000 (6fff) get Phys(data[n=1+7000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:8c5e3000 ph data[1]=0:8c5e3000 (fff) get Phys(data[n=2+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:8c5ec000 ph data[2]=0:8c5ec000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:8c5ed000 ph data[2]=0:8c5ec000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:8c5ee000 ph data[2]=0:8c5ec000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:8c5ef000 ph data[2]=0:8c5ec000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:8c5f0000 ph data[2]=0:8c5ec000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:8c5f1000 ph data[2]=0:8c5ec000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:8c5f2000 ph data[2]=0:8c5ec000 (6fff) get Phys(data[n=3+7000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:8c5eb000 set TERM ph data[3]=0:8c5eb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396078e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396079e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396079e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:8c5f4000 ph data[0]=0:8c5f4000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:8c5f5000 ph data[0]=0:8c5f4000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:8c5f6000 ph data[0]=0:8c5f4000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:8c5f7000 ph data[0]=0:8c5f4000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:8c5f8000 ph data[0]=0:8c5f4000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:8c5f9000 ph data[0]=0:8c5f4000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:8c5fa000 ph data[0]=0:8c5f4000 (6fff) get Phys(data[n=1+7000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:8c5f3000 ph data[1]=0:8c5f3000 (fff) get Phys(data[n=2+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:8c5fc000 ph data[2]=0:8c5fc000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:8c5fd000 ph data[2]=0:8c5fc000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:8c5fe000 ph data[2]=0:8c5fc000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:8c5ff000 ph data[2]=0:8c5fc000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:8c600000 ph data[2]=0:8c5fc000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:8c601000 ph data[2]=0:8c5fc000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:8c602000 ph data[2]=0:8c5fc000 (6fff) get Phys(data[n=3+7000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:8c5fb000 set TERM ph data[3]=0:8c5fb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396079e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607a60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607a60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:8c604000 ph data[0]=0:8c604000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:8c605000 ph data[0]=0:8c604000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:8c606000 ph data[0]=0:8c604000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:8c607000 ph data[0]=0:8c604000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:8c608000 ph data[0]=0:8c604000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:8c609000 ph data[0]=0:8c604000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:8c60a000 ph data[0]=0:8c604000 (6fff) get Phys(data[n=1+7000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:8c603000 ph data[1]=0:8c603000 (fff) get Phys(data[n=2+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:8c60c000 ph data[2]=0:8c60c000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:8c60d000 ph data[2]=0:8c60c000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:8c60e000 ph data[2]=0:8c60c000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:8c60f000 ph data[2]=0:8c60c000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:8c610000 ph data[2]=0:8c60c000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:8c611000 ph data[2]=0:8c60c000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:8c612000 ph data[2]=0:8c60c000 (6fff) get Phys(data[n=3+7000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:8c60b000 set TERM ph data[3]=0:8c60b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607a60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607ae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607ae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:8c614000 ph data[0]=0:8c614000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:8c615000 ph data[0]=0:8c614000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:8c616000 ph data[0]=0:8c614000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:8c617000 ph data[0]=0:8c614000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:8c618000 ph data[0]=0:8c614000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:8c619000 ph data[0]=0:8c614000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:8c61a000 ph data[0]=0:8c614000 (6fff) get Phys(data[n=1+7000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:8c613000 ph data[1]=0:8c613000 (fff) get Phys(data[n=2+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:8c61c000 ph data[2]=0:8c61c000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:8c61d000 ph data[2]=0:8c61c000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:8c61e000 ph data[2]=0:8c61c000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:8c61f000 ph data[2]=0:8c61c000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:8c620000 ph data[2]=0:8c61c000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:8c621000 ph data[2]=0:8c61c000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:8c622000 ph data[2]=0:8c61c000 (6fff) get Phys(data[n=3+7000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:8c61b000 set TERM ph data[3]=0:8c61b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607b60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607b60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:8c624000 ph data[0]=0:8c624000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:8c625000 ph data[0]=0:8c624000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:8c626000 ph data[0]=0:8c624000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:8c627000 ph data[0]=0:8c624000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:8c628000 ph data[0]=0:8c624000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:8c629000 ph data[0]=0:8c624000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:8c62a000 ph data[0]=0:8c624000 (6fff) get Phys(data[n=1+7000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:8c623000 ph data[1]=0:8c623000 (fff) get Phys(data[n=2+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:8c62c000 ph data[2]=0:8c62c000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:8c62d000 ph data[2]=0:8c62c000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:8c62e000 ph data[2]=0:8c62c000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:8c62f000 ph data[2]=0:8c62c000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:8c630000 ph data[2]=0:8c62c000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:8c631000 ph data[2]=0:8c62c000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:8c632000 ph data[2]=0:8c62c000 (6fff) get Phys(data[n=3+7000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:8c62b000 set TERM ph data[3]=0:8c62b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607ae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607be0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607be0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:8c634000 ph data[0]=0:8c634000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:8c635000 ph data[0]=0:8c634000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:8c636000 ph data[0]=0:8c634000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:8c637000 ph data[0]=0:8c634000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:8c638000 ph data[0]=0:8c634000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:8c639000 ph data[0]=0:8c634000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:8c63a000 ph data[0]=0:8c634000 (6fff) get Phys(data[n=1+7000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:8c633000 ph data[1]=0:8c633000 (fff) get Phys(data[n=2+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:8c63c000 ph data[2]=0:8c63c000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:8c63d000 ph data[2]=0:8c63c000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:8c63e000 ph data[2]=0:8c63c000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:8c63f000 ph data[2]=0:8c63c000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:8c640000 ph data[2]=0:8c63c000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:8c641000 ph data[2]=0:8c63c000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:8c642000 ph data[2]=0:8c63c000 (6fff) get Phys(data[n=3+7000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:8c63b000 set TERM ph data[3]=0:8c63b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607b60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607be0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607c60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607c60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:85c44000 ph data[0]=0:85c44000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:85c45000 ph data[0]=0:85c44000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:85c46000 ph data[0]=0:85c44000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:85c47000 ph data[0]=0:85c44000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:85c48000 ph data[0]=0:85c44000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:85c49000 ph data[0]=0:85c44000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:85c42000 ph data[1]=0:85c42000 (fff) get Phys(data[n=2+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:85c43000 ph data[1]=0:85c42000 (1fff) get Phys(data[n=2+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:85c4c000 ph data[2]=0:85c4c000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:85c4d000 ph data[2]=0:85c4c000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:85c4e000 ph data[2]=0:85c4c000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:85c4f000 ph data[2]=0:85c4c000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:85c50000 ph data[2]=0:85c4c000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:85c51000 ph data[2]=0:85c4c000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:85c4a000 ph data[3]=0:85c4a000 (fff) get Phys(data[n=4+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:85c4b000 set TERM ph data[3]=0:85c4a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607c60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607ce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607ce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:85c54000 ph data[0]=0:85c54000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:85c55000 ph data[0]=0:85c54000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:85c56000 ph data[0]=0:85c54000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:85c57000 ph data[0]=0:85c54000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:85c58000 ph data[0]=0:85c54000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:85c59000 ph data[0]=0:85c54000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:85c52000 ph data[1]=0:85c52000 (fff) get Phys(data[n=2+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:85c53000 ph data[1]=0:85c52000 (1fff) get Phys(data[n=2+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:85c5c000 ph data[2]=0:85c5c000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:85c5d000 ph data[2]=0:85c5c000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:85c5e000 ph data[2]=0:85c5c000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:85c5f000 ph data[2]=0:85c5c000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:85c60000 ph data[2]=0:85c5c000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:85c61000 ph data[2]=0:85c5c000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:85c5a000 ph data[3]=0:85c5a000 (fff) get Phys(data[n=4+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:85c5b000 set TERM ph data[3]=0:85c5a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607d60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607d60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:85c64000 ph data[0]=0:85c64000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:85c65000 ph data[0]=0:85c64000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:85c66000 ph data[0]=0:85c64000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:85c67000 ph data[0]=0:85c64000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:85c68000 ph data[0]=0:85c64000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:85c69000 ph data[0]=0:85c64000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:85c62000 ph data[1]=0:85c62000 (fff) get Phys(data[n=2+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:85c63000 ph data[1]=0:85c62000 (1fff) get Phys(data[n=2+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:85c6c000 ph data[2]=0:85c6c000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:85c6d000 ph data[2]=0:85c6c000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:85c6e000 ph data[2]=0:85c6c000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:85c6f000 ph data[2]=0:85c6c000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:85c70000 ph data[2]=0:85c6c000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:85c71000 ph data[2]=0:85c6c000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:85c6a000 ph data[3]=0:85c6a000 (fff) get Phys(data[n=4+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:85c6b000 set TERM ph data[3]=0:85c6a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607ce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607de0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607de0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:85c74000 ph data[0]=0:85c74000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:85c75000 ph data[0]=0:85c74000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:85c76000 ph data[0]=0:85c74000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:85c77000 ph data[0]=0:85c74000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:85c78000 ph data[0]=0:85c74000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:85c79000 ph data[0]=0:85c74000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:85c72000 ph data[1]=0:85c72000 (fff) get Phys(data[n=2+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:85c73000 ph data[1]=0:85c72000 (1fff) get Phys(data[n=2+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:85c7c000 ph data[2]=0:85c7c000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:85c7d000 ph data[2]=0:85c7c000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:85c7e000 ph data[2]=0:85c7c000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:85c7f000 ph data[2]=0:85c7c000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:85c80000 ph data[2]=0:85c7c000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:85c81000 ph data[2]=0:85c7c000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:85c7a000 ph data[3]=0:85c7a000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:85c7b000 set TERM ph data[3]=0:85c7a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55e4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607d60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607de0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607e60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607e60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:85c84000 ph data[0]=0:85c84000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:85c85000 ph data[0]=0:85c84000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:85c86000 ph data[0]=0:85c84000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:85c87000 ph data[0]=0:85c84000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:85c88000 ph data[0]=0:85c84000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:85c89000 ph data[0]=0:85c84000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:85c82000 ph data[1]=0:85c82000 (fff) get Phys(data[n=2+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:85c83000 ph data[1]=0:85c82000 (1fff) get Phys(data[n=2+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:85c8c000 ph data[2]=0:85c8c000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:85c8d000 ph data[2]=0:85c8c000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:85c8e000 ph data[2]=0:85c8c000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:85c8f000 ph data[2]=0:85c8c000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:85c90000 ph data[2]=0:85c8c000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:85c91000 ph data[2]=0:85c8c000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:85c8a000 ph data[3]=0:85c8a000 (fff) get Phys(data[n=4+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:85c8b000 set TERM ph data[3]=0:85c8a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607e60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607ee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607ee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:85c94000 ph data[0]=0:85c94000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:85c95000 ph data[0]=0:85c94000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:85c96000 ph data[0]=0:85c94000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:85c97000 ph data[0]=0:85c94000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:85c98000 ph data[0]=0:85c94000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:85c99000 ph data[0]=0:85c94000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:85c92000 ph data[1]=0:85c92000 (fff) get Phys(data[n=2+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:85c93000 ph data[1]=0:85c92000 (1fff) get Phys(data[n=2+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:85c9c000 ph data[2]=0:85c9c000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:85c9d000 ph data[2]=0:85c9c000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:85c9e000 ph data[2]=0:85c9c000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:85c9f000 ph data[2]=0:85c9c000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:85ca0000 ph data[2]=0:85c9c000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:85ca1000 ph data[2]=0:85c9c000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:85c9a000 ph data[3]=0:85c9a000 (fff) get Phys(data[n=4+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:85c9b000 set TERM ph data[3]=0:85c9a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607f60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607f60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:85ca4000 ph data[0]=0:85ca4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:85ca5000 ph data[0]=0:85ca4000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:85ca6000 ph data[0]=0:85ca4000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:85ca7000 ph data[0]=0:85ca4000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:85ca8000 ph data[0]=0:85ca4000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:85ca9000 ph data[0]=0:85ca4000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:85ca2000 ph data[1]=0:85ca2000 (fff) get Phys(data[n=2+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:85ca3000 ph data[1]=0:85ca2000 (1fff) get Phys(data[n=2+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:85cac000 ph data[2]=0:85cac000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:85cad000 ph data[2]=0:85cac000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:85cae000 ph data[2]=0:85cac000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:85caf000 ph data[2]=0:85cac000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:85cb0000 ph data[2]=0:85cac000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:85cb1000 ph data[2]=0:85cac000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:85caa000 ph data[3]=0:85caa000 (fff) get Phys(data[n=4+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:85cab000 set TERM ph data[3]=0:85caa000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607ee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39607fe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39607fe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:85cb4000 ph data[0]=0:85cb4000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:85cb5000 ph data[0]=0:85cb4000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:85cb6000 ph data[0]=0:85cb4000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:85cb7000 ph data[0]=0:85cb4000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:85cb8000 ph data[0]=0:85cb4000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:85cb9000 ph data[0]=0:85cb4000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:85cb2000 ph data[1]=0:85cb2000 (fff) get Phys(data[n=2+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:85cb3000 ph data[1]=0:85cb2000 (1fff) get Phys(data[n=2+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:85cbc000 ph data[2]=0:85cbc000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:85cbd000 ph data[2]=0:85cbc000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:85cbe000 ph data[2]=0:85cbc000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:85cbf000 ph data[2]=0:85cbc000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:85cc0000 ph data[2]=0:85cbc000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:85cc1000 ph data[2]=0:85cbc000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:85cba000 ph data[3]=0:85cba000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:85cbb000 set TERM ph data[3]=0:85cba000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607f60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39607fe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:836cc000 ph data[0]=0:836cc000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:836cd000 ph data[0]=0:836cc000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:836ce000 ph data[0]=0:836cc000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:836cf000 ph data[0]=0:836cc000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:836c8000 ph data[1]=0:836c8000 (fff) get Phys(data[n=2+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:836c9000 ph data[1]=0:836c8000 (1fff) get Phys(data[n=2+2000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:836ca000 ph data[1]=0:836c8000 (2fff) get Phys(data[n=2+3000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:836cb000 ph data[1]=0:836c8000 (3fff) get Phys(data[n=2+4000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:836d4000 ph data[2]=0:836d4000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:836d5000 ph data[2]=0:836d4000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:836d6000 ph data[2]=0:836d4000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:836d7000 ph data[2]=0:836d4000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:836d0000 ph data[3]=0:836d0000 (fff) get Phys(data[n=4+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:836d1000 ph data[3]=0:836d0000 (1fff) get Phys(data[n=4+2000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:836d2000 ph data[3]=0:836d0000 (2fff) get Phys(data[n=4+3000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:836d3000 set TERM ph data[3]=0:836d0000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396080e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396080e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:836dc000 ph data[0]=0:836dc000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:836dd000 ph data[0]=0:836dc000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:836de000 ph data[0]=0:836dc000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:836df000 ph data[0]=0:836dc000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:836d8000 ph data[1]=0:836d8000 (fff) get Phys(data[n=2+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:836d9000 ph data[1]=0:836d8000 (1fff) get Phys(data[n=2+2000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:836da000 ph data[1]=0:836d8000 (2fff) get Phys(data[n=2+3000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:836db000 ph data[1]=0:836d8000 (3fff) get Phys(data[n=2+4000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:836e4000 ph data[2]=0:836e4000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:836e5000 ph data[2]=0:836e4000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:836e6000 ph data[2]=0:836e4000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:836e7000 ph data[2]=0:836e4000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:836e0000 ph data[3]=0:836e0000 (fff) get Phys(data[n=4+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:836e1000 ph data[3]=0:836e0000 (1fff) get Phys(data[n=4+2000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:836e2000 ph data[3]=0:836e0000 (2fff) get Phys(data[n=4+3000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:836e3000 set TERM ph data[3]=0:836e0000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:836ec000 ph data[0]=0:836ec000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:836ed000 ph data[0]=0:836ec000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:836ee000 ph data[0]=0:836ec000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:836ef000 ph data[0]=0:836ec000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:836e8000 ph data[1]=0:836e8000 (fff) get Phys(data[n=2+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:836e9000 ph data[1]=0:836e8000 (1fff) get Phys(data[n=2+2000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:836ea000 ph data[1]=0:836e8000 (2fff) get Phys(data[n=2+3000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:836eb000 ph data[1]=0:836e8000 (3fff) get Phys(data[n=2+4000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:836f4000 ph data[2]=0:836f4000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:836f5000 ph data[2]=0:836f4000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:836f6000 ph data[2]=0:836f4000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:836f7000 ph data[2]=0:836f4000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:836f0000 ph data[3]=0:836f0000 (fff) get Phys(data[n=4+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:836f1000 ph data[3]=0:836f0000 (1fff) get Phys(data[n=4+2000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:836f2000 ph data[3]=0:836f0000 (2fff) get Phys(data[n=4+3000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:836f3000 set TERM ph data[3]=0:836f0000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396080e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396081e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396081e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:836fc000 ph data[0]=0:836fc000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:836fd000 ph data[0]=0:836fc000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:836fe000 ph data[0]=0:836fc000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:836ff000 ph data[0]=0:836fc000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:836f8000 ph data[1]=0:836f8000 (fff) get Phys(data[n=2+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:836f9000 ph data[1]=0:836f8000 (1fff) get Phys(data[n=2+2000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:836fa000 ph data[1]=0:836f8000 (2fff) get Phys(data[n=2+3000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:836fb000 ph data[1]=0:836f8000 (3fff) get Phys(data[n=2+4000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:83704000 ph data[2]=0:83704000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:83705000 ph data[2]=0:83704000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:83706000 ph data[2]=0:83704000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:83707000 ph data[2]=0:83704000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:83700000 ph data[3]=0:83700000 (fff) get Phys(data[n=4+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:83701000 ph data[3]=0:83700000 (1fff) get Phys(data[n=4+2000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:83702000 ph data[3]=0:83700000 (2fff) get Phys(data[n=4+3000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:83703000 set TERM ph data[3]=0:83700000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608160, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396081e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960de60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960de60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bac000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:0c0f5000 ph data[0]=0:c0f5000 (fff) get Phys(data[n=1+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:0c17e000 ph data[1]=0:c17e000 (fff) get Phys(data[n=2+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:0c11f000 ph data[2]=0:c11f000 (fff) get Phys(data[n=3+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:3fef8000 ph data[3]=0:3fef8000 (fff) get Phys(data[n=4+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:3f7c9000 ph data[4]=0:3f7c9000 (fff) get Phys(data[n=5+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:38d2a000 ph data[5]=0:38d2a000 (fff) get Phys(data[n=6+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:0c0f3000 ph data[6]=0:c0f3000 (fff) get Phys(data[n=7+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:0c11c000 ph data[7]=0:c11c000 (fff) get Phys(data[n=8+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:0c0fd000 ph data[8]=0:c0fd000 (fff) get Phys(data[n=9+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:0c186000 ph data[9]=0:c186000 (fff) get Phys(data[n=10+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:60cbf000 ph data[10]=0:60cbf000 (fff) get Phys(data[n=11+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:66298000 ph data[11]=0:66298000 (fff) get Phys(data[n=12+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:3fe31000 ph data[12]=0:3fe31000 (fff) get Phys(data[n=13+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:3feca000 ph data[13]=0:3feca000 (fff) get Phys(data[n=14+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:3fedb000 ph data[14]=0:3fedb000 (fff) get Phys(data[n=15+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:60cc4000 set TERM ph data[15]=0:60cc4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960de60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960dee0, OrigWordsRequested 0x2b00, DevSize 0x2b IdeReadWrite (REQ): Starting sector is 3960dee0, Number of WORDS 0x2b00, DevSize 0x2b AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bbc000, count 5600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:3fecd000 ph data[0]=0:3fecd000 (fff) get Phys(data[n=1+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:67756000 ph data[1]=0:67756000 (fff) get Phys(data[n=2+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:60cc7000 ph data[2]=0:60cc7000 (fff) get Phys(data[n=3+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:662a0000 ph data[3]=0:662a0000 (fff) get Phys(data[n=4+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:3fe39000 ph data[4]=0:3fe39000 (fff) get Phys(data[n=5+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:3fed2000 set TERM ph data[5]=0:3fed2000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dee0, Count 0x2b(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x6, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 2b00, WordsLeft 2b00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5600, full size 5600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:8370c000 ph data[0]=0:8370c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:8370d000 ph data[0]=0:8370c000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:8370e000 ph data[0]=0:8370c000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:8370f000 ph data[0]=0:8370c000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:83708000 ph data[1]=0:83708000 (fff) get Phys(data[n=2+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:83709000 ph data[1]=0:83708000 (1fff) get Phys(data[n=2+2000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:8370a000 ph data[1]=0:83708000 (2fff) get Phys(data[n=2+3000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:8370b000 ph data[1]=0:83708000 (3fff) get Phys(data[n=2+4000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:83714000 ph data[2]=0:83714000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:83715000 ph data[2]=0:83714000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:83716000 ph data[2]=0:83714000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:83717000 ph data[2]=0:83714000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:83710000 ph data[3]=0:83710000 (fff) get Phys(data[n=4+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:83711000 ph data[3]=0:83710000 (1fff) get Phys(data[n=4+2000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:83712000 ph data[3]=0:83710000 (2fff) get Phys(data[n=4+3000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:83713000 set TERM ph data[3]=0:83710000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608260, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396082e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396082e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:8371c000 ph data[0]=0:8371c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:8371d000 ph data[0]=0:8371c000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:8371e000 ph data[0]=0:8371c000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:8371f000 ph data[0]=0:8371c000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:83718000 ph data[1]=0:83718000 (fff) get Phys(data[n=2+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:83719000 ph data[1]=0:83718000 (1fff) get Phys(data[n=2+2000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:8371a000 ph data[1]=0:83718000 (2fff) get Phys(data[n=2+3000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:8371b000 ph data[1]=0:83718000 (3fff) get Phys(data[n=2+4000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:83724000 ph data[2]=0:83724000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:83725000 ph data[2]=0:83724000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:83726000 ph data[2]=0:83724000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:83727000 ph data[2]=0:83724000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:83720000 ph data[3]=0:83720000 (fff) get Phys(data[n=4+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:83721000 ph data[3]=0:83720000 (1fff) get Phys(data[n=4+2000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:83722000 ph data[3]=0:83720000 (2fff) get Phys(data[n=4+3000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:83723000 set TERM ph data[3]=0:83720000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608360, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608360, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:8372c000 ph data[0]=0:8372c000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:8372d000 ph data[0]=0:8372c000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:8372e000 ph data[0]=0:8372c000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:8372f000 ph data[0]=0:8372c000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:83728000 ph data[1]=0:83728000 (fff) get Phys(data[n=2+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:83729000 ph data[1]=0:83728000 (1fff) get Phys(data[n=2+2000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:8372a000 ph data[1]=0:83728000 (2fff) get Phys(data[n=2+3000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:8372b000 ph data[1]=0:83728000 (3fff) get Phys(data[n=2+4000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:83734000 ph data[2]=0:83734000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:83735000 ph data[2]=0:83734000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:83736000 ph data[2]=0:83734000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:83737000 ph data[2]=0:83734000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:83730000 ph data[3]=0:83730000 (fff) get Phys(data[n=4+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:83731000 ph data[3]=0:83730000 (1fff) get Phys(data[n=4+2000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:83732000 ph data[3]=0:83730000 (2fff) get Phys(data[n=4+3000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:83733000 set TERM ph data[3]=0:83730000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396083e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396083e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:8373c000 ph data[0]=0:8373c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:8373d000 ph data[0]=0:8373c000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:8373e000 ph data[0]=0:8373c000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:8373f000 ph data[0]=0:8373c000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:83738000 ph data[1]=0:83738000 (fff) get Phys(data[n=2+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:83739000 ph data[1]=0:83738000 (1fff) get Phys(data[n=2+2000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:8373a000 ph data[1]=0:83738000 (2fff) get Phys(data[n=2+3000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:8373b000 ph data[1]=0:83738000 (3fff) get Phys(data[n=2+4000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:83744000 ph data[2]=0:83744000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:83745000 ph data[2]=0:83744000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:83746000 ph data[2]=0:83744000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:83747000 ph data[2]=0:83744000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:83740000 ph data[3]=0:83740000 (fff) get Phys(data[n=4+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:83741000 ph data[3]=0:83740000 (1fff) get Phys(data[n=4+2000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:83742000 ph data[3]=0:83740000 (2fff) get Phys(data[n=4+3000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:83743000 set TERM ph data[3]=0:83740000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396082e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608360, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396083e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5770 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001d30, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39001d30, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:6bbd5000 ph data[0]=0:6bbd5000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:6bbce000 set TERM ph data[1]=0:6bbce000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001d30, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:7defc000 ph data[0]=0:7defc000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:7defd000 ph data[0]=0:7defc000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:7defe000 ph data[0]=0:7defc000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:7deff000 ph data[0]=0:7defc000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:7df00000 ph data[0]=0:7defc000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:7df01000 ph data[0]=0:7defc000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:7defa000 ph data[1]=0:7defa000 (fff) get Phys(data[n=2+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:7defb000 ph data[1]=0:7defa000 (1fff) get Phys(data[n=2+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:7df04000 ph data[2]=0:7df04000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:7df05000 ph data[2]=0:7df04000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:7df06000 ph data[2]=0:7df04000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:7df07000 ph data[2]=0:7df04000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:7df08000 ph data[2]=0:7df04000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:7df09000 ph data[2]=0:7df04000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:7df02000 ph data[3]=0:7df02000 (fff) get Phys(data[n=4+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:7df03000 set TERM ph data[3]=0:7df02000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608460, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396084e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396084e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:7df0c000 ph data[0]=0:7df0c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:7df0d000 ph data[0]=0:7df0c000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:7df0e000 ph data[0]=0:7df0c000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:7df0f000 ph data[0]=0:7df0c000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:7df10000 ph data[0]=0:7df0c000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:7df11000 ph data[0]=0:7df0c000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:7df0a000 ph data[1]=0:7df0a000 (fff) get Phys(data[n=2+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:7df0b000 ph data[1]=0:7df0a000 (1fff) get Phys(data[n=2+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:7df14000 ph data[2]=0:7df14000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:7df15000 ph data[2]=0:7df14000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:7df16000 ph data[2]=0:7df14000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:7df17000 ph data[2]=0:7df14000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:7df18000 ph data[2]=0:7df14000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:7df19000 ph data[2]=0:7df14000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:7df12000 ph data[3]=0:7df12000 (fff) get Phys(data[n=4+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:7df13000 set TERM ph data[3]=0:7df12000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:7df1c000 ph data[0]=0:7df1c000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:7df1d000 ph data[0]=0:7df1c000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:7df1e000 ph data[0]=0:7df1c000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:7df1f000 ph data[0]=0:7df1c000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:7df20000 ph data[0]=0:7df1c000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:7df21000 ph data[0]=0:7df1c000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:7df1a000 ph data[1]=0:7df1a000 (fff) get Phys(data[n=2+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:7df1b000 ph data[1]=0:7df1a000 (1fff) get Phys(data[n=2+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:7df24000 ph data[2]=0:7df24000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:7df25000 ph data[2]=0:7df24000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:7df26000 ph data[2]=0:7df24000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:7df27000 ph data[2]=0:7df24000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:7df28000 ph data[2]=0:7df24000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:7df29000 ph data[2]=0:7df24000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:7df22000 ph data[3]=0:7df22000 (fff) get Phys(data[n=4+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:7df23000 set TERM ph data[3]=0:7df22000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396084e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396085e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396085e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:7df2c000 ph data[0]=0:7df2c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:7df2d000 ph data[0]=0:7df2c000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:7df2e000 ph data[0]=0:7df2c000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:7df2f000 ph data[0]=0:7df2c000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:7df30000 ph data[0]=0:7df2c000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:7df31000 ph data[0]=0:7df2c000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:7df2a000 ph data[1]=0:7df2a000 (fff) get Phys(data[n=2+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:7df2b000 ph data[1]=0:7df2a000 (1fff) get Phys(data[n=2+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:7df34000 ph data[2]=0:7df34000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:7df35000 ph data[2]=0:7df34000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:7df36000 ph data[2]=0:7df34000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:7df37000 ph data[2]=0:7df34000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:7df38000 ph data[2]=0:7df34000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:7df39000 ph data[2]=0:7df34000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:7df32000 ph data[3]=0:7df32000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:7df33000 set TERM ph data[3]=0:7df32000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608560, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396085e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:7df3c000 ph data[0]=0:7df3c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:7df3d000 ph data[0]=0:7df3c000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:7df3e000 ph data[0]=0:7df3c000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:7df3f000 ph data[0]=0:7df3c000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:7df40000 ph data[0]=0:7df3c000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:7df41000 ph data[0]=0:7df3c000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:7df3a000 ph data[1]=0:7df3a000 (fff) get Phys(data[n=2+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:7df3b000 ph data[1]=0:7df3a000 (1fff) get Phys(data[n=2+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:7df44000 ph data[2]=0:7df44000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:7df45000 ph data[2]=0:7df44000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:7df46000 ph data[2]=0:7df44000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:7df47000 ph data[2]=0:7df44000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:7df48000 ph data[2]=0:7df44000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:7df49000 ph data[2]=0:7df44000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:7df42000 ph data[3]=0:7df42000 (fff) get Phys(data[n=4+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:7df43000 set TERM ph data[3]=0:7df42000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396086e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396086e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:7df4c000 ph data[0]=0:7df4c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:7df4d000 ph data[0]=0:7df4c000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:7df4e000 ph data[0]=0:7df4c000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:7df4f000 ph data[0]=0:7df4c000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:7df50000 ph data[0]=0:7df4c000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:7df51000 ph data[0]=0:7df4c000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:7df4a000 ph data[1]=0:7df4a000 (fff) get Phys(data[n=2+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:7df4b000 ph data[1]=0:7df4a000 (1fff) get Phys(data[n=2+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:7df54000 ph data[2]=0:7df54000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:7df55000 ph data[2]=0:7df54000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:7df56000 ph data[2]=0:7df54000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:7df57000 ph data[2]=0:7df54000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:7df58000 ph data[2]=0:7df54000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:7df59000 ph data[2]=0:7df54000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:7df52000 ph data[3]=0:7df52000 (fff) get Phys(data[n=4+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:7df53000 set TERM ph data[3]=0:7df52000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:7df5c000 ph data[0]=0:7df5c000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:7df5d000 ph data[0]=0:7df5c000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:7df5e000 ph data[0]=0:7df5c000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:7df5f000 ph data[0]=0:7df5c000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:7df60000 ph data[0]=0:7df5c000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:7df61000 ph data[0]=0:7df5c000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:7df5a000 ph data[1]=0:7df5a000 (fff) get Phys(data[n=2+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:7df5b000 ph data[1]=0:7df5a000 (1fff) get Phys(data[n=2+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:7df64000 ph data[2]=0:7df64000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:7df65000 ph data[2]=0:7df64000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:7df66000 ph data[2]=0:7df64000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:7df67000 ph data[2]=0:7df64000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:7df68000 ph data[2]=0:7df64000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:7df69000 ph data[2]=0:7df64000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:7df62000 ph data[3]=0:7df62000 (fff) get Phys(data[n=4+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:7df63000 set TERM ph data[3]=0:7df62000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396086e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396087e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396087e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:7df6c000 ph data[0]=0:7df6c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:7df6d000 ph data[0]=0:7df6c000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:7df6e000 ph data[0]=0:7df6c000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:7df6f000 ph data[0]=0:7df6c000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:7df70000 ph data[0]=0:7df6c000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:7df71000 ph data[0]=0:7df6c000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:7df6a000 ph data[1]=0:7df6a000 (fff) get Phys(data[n=2+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:7df6b000 ph data[1]=0:7df6a000 (1fff) get Phys(data[n=2+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:7df74000 ph data[2]=0:7df74000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:7df75000 ph data[2]=0:7df74000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:7df76000 ph data[2]=0:7df74000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:7df77000 ph data[2]=0:7df74000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:7df78000 ph data[2]=0:7df74000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:7df79000 ph data[2]=0:7df74000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:7df72000 ph data[3]=0:7df72000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:7df73000 set TERM ph data[3]=0:7df72000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396087e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:796b4000 ph data[0]=0:796b4000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:796b5000 ph data[0]=0:796b4000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:796ae000 ph data[1]=0:796ae000 (fff) get Phys(data[n=2+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:796af000 ph data[1]=0:796ae000 (1fff) get Phys(data[n=2+2000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:796b0000 ph data[1]=0:796ae000 (2fff) get Phys(data[n=2+3000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:796b1000 ph data[1]=0:796ae000 (3fff) get Phys(data[n=2+4000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:796b2000 ph data[1]=0:796ae000 (4fff) get Phys(data[n=2+5000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:796b3000 ph data[1]=0:796ae000 (5fff) get Phys(data[n=2+6000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:796bc000 ph data[2]=0:796bc000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:796bd000 ph data[2]=0:796bc000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:796b6000 ph data[3]=0:796b6000 (fff) get Phys(data[n=4+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:796b7000 ph data[3]=0:796b6000 (1fff) get Phys(data[n=4+2000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:796b8000 ph data[3]=0:796b6000 (2fff) get Phys(data[n=4+3000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:796b9000 ph data[3]=0:796b6000 (3fff) get Phys(data[n=4+4000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:796ba000 ph data[3]=0:796b6000 (4fff) get Phys(data[n=4+5000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:796bb000 set TERM ph data[3]=0:796b6000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396088e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396088e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:796c4000 ph data[0]=0:796c4000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:796c5000 ph data[0]=0:796c4000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:796be000 ph data[1]=0:796be000 (fff) get Phys(data[n=2+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:796bf000 ph data[1]=0:796be000 (1fff) get Phys(data[n=2+2000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:796c0000 ph data[1]=0:796be000 (2fff) get Phys(data[n=2+3000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:796c1000 ph data[1]=0:796be000 (3fff) get Phys(data[n=2+4000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:796c2000 ph data[1]=0:796be000 (4fff) get Phys(data[n=2+5000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:796c3000 ph data[1]=0:796be000 (5fff) get Phys(data[n=2+6000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:796cc000 ph data[2]=0:796cc000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:796cd000 ph data[2]=0:796cc000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:796c6000 ph data[3]=0:796c6000 (fff) get Phys(data[n=4+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:796c7000 ph data[3]=0:796c6000 (1fff) get Phys(data[n=4+2000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:796c8000 ph data[3]=0:796c6000 (2fff) get Phys(data[n=4+3000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:796c9000 ph data[3]=0:796c6000 (3fff) get Phys(data[n=4+4000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:796ca000 ph data[3]=0:796c6000 (4fff) get Phys(data[n=4+5000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:796cb000 set TERM ph data[3]=0:796c6000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:796d4000 ph data[0]=0:796d4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:796d5000 ph data[0]=0:796d4000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:796ce000 ph data[1]=0:796ce000 (fff) get Phys(data[n=2+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:796cf000 ph data[1]=0:796ce000 (1fff) get Phys(data[n=2+2000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:796d0000 ph data[1]=0:796ce000 (2fff) get Phys(data[n=2+3000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:796d1000 ph data[1]=0:796ce000 (3fff) get Phys(data[n=2+4000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:796d2000 ph data[1]=0:796ce000 (4fff) get Phys(data[n=2+5000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:796d3000 ph data[1]=0:796ce000 (5fff) get Phys(data[n=2+6000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:796dc000 ph data[2]=0:796dc000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:796dd000 ph data[2]=0:796dc000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:796d6000 ph data[3]=0:796d6000 (fff) get Phys(data[n=4+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:796d7000 ph data[3]=0:796d6000 (1fff) get Phys(data[n=4+2000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:796d8000 ph data[3]=0:796d6000 (2fff) get Phys(data[n=4+3000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:796d9000 ph data[3]=0:796d6000 (3fff) get Phys(data[n=4+4000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:796da000 ph data[3]=0:796d6000 (4fff) get Phys(data[n=4+5000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:796db000 set TERM ph data[3]=0:796d6000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396088e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396089e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396089e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:796e4000 ph data[0]=0:796e4000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:796e5000 ph data[0]=0:796e4000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:796de000 ph data[1]=0:796de000 (fff) get Phys(data[n=2+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:796df000 ph data[1]=0:796de000 (1fff) get Phys(data[n=2+2000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:796e0000 ph data[1]=0:796de000 (2fff) get Phys(data[n=2+3000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:796e1000 ph data[1]=0:796de000 (3fff) get Phys(data[n=2+4000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:796e2000 ph data[1]=0:796de000 (4fff) get Phys(data[n=2+5000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:796e3000 ph data[1]=0:796de000 (5fff) get Phys(data[n=2+6000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:796ec000 ph data[2]=0:796ec000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:796ed000 ph data[2]=0:796ec000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:796e6000 ph data[3]=0:796e6000 (fff) get Phys(data[n=4+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:796e7000 ph data[3]=0:796e6000 (1fff) get Phys(data[n=4+2000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:796e8000 ph data[3]=0:796e6000 (2fff) get Phys(data[n=4+3000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:796e9000 ph data[3]=0:796e6000 (3fff) get Phys(data[n=4+4000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:796ea000 ph data[3]=0:796e6000 (4fff) get Phys(data[n=4+5000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:796eb000 set TERM ph data[3]=0:796e6000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396089e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608a60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608a60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:796f4000 ph data[0]=0:796f4000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:796f5000 ph data[0]=0:796f4000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:796ee000 ph data[1]=0:796ee000 (fff) get Phys(data[n=2+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:796ef000 ph data[1]=0:796ee000 (1fff) get Phys(data[n=2+2000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:796f0000 ph data[1]=0:796ee000 (2fff) get Phys(data[n=2+3000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:796f1000 ph data[1]=0:796ee000 (3fff) get Phys(data[n=2+4000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:796f2000 ph data[1]=0:796ee000 (4fff) get Phys(data[n=2+5000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:796f3000 ph data[1]=0:796ee000 (5fff) get Phys(data[n=2+6000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:796fc000 ph data[2]=0:796fc000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:796fd000 ph data[2]=0:796fc000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:796f6000 ph data[3]=0:796f6000 (fff) get Phys(data[n=4+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:796f7000 ph data[3]=0:796f6000 (1fff) get Phys(data[n=4+2000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:796f8000 ph data[3]=0:796f6000 (2fff) get Phys(data[n=4+3000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:796f9000 ph data[3]=0:796f6000 (3fff) get Phys(data[n=4+4000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:796fa000 ph data[3]=0:796f6000 (4fff) get Phys(data[n=4+5000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:796fb000 set TERM ph data[3]=0:796f6000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608a60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608ae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608ae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:79704000 ph data[0]=0:79704000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:79705000 ph data[0]=0:79704000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:796fe000 ph data[1]=0:796fe000 (fff) get Phys(data[n=2+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:796ff000 ph data[1]=0:796fe000 (1fff) get Phys(data[n=2+2000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:79700000 ph data[1]=0:796fe000 (2fff) get Phys(data[n=2+3000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:79701000 ph data[1]=0:796fe000 (3fff) get Phys(data[n=2+4000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:79702000 ph data[1]=0:796fe000 (4fff) get Phys(data[n=2+5000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:79703000 ph data[1]=0:796fe000 (5fff) get Phys(data[n=2+6000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:7970c000 ph data[2]=0:7970c000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:7970d000 ph data[2]=0:7970c000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:79706000 ph data[3]=0:79706000 (fff) get Phys(data[n=4+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:79707000 ph data[3]=0:79706000 (1fff) get Phys(data[n=4+2000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:79708000 ph data[3]=0:79706000 (2fff) get Phys(data[n=4+3000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:79709000 ph data[3]=0:79706000 (3fff) get Phys(data[n=4+4000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:7970a000 ph data[3]=0:79706000 (4fff) get Phys(data[n=4+5000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:7970b000 set TERM ph data[3]=0:79706000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608b60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608b60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:79714000 ph data[0]=0:79714000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:79715000 ph data[0]=0:79714000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:7970e000 ph data[1]=0:7970e000 (fff) get Phys(data[n=2+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:7970f000 ph data[1]=0:7970e000 (1fff) get Phys(data[n=2+2000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:79710000 ph data[1]=0:7970e000 (2fff) get Phys(data[n=2+3000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:79711000 ph data[1]=0:7970e000 (3fff) get Phys(data[n=2+4000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:79712000 ph data[1]=0:7970e000 (4fff) get Phys(data[n=2+5000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:79713000 ph data[1]=0:7970e000 (5fff) get Phys(data[n=2+6000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:7971c000 ph data[2]=0:7971c000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:7971d000 ph data[2]=0:7971c000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:79716000 ph data[3]=0:79716000 (fff) get Phys(data[n=4+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:79717000 ph data[3]=0:79716000 (1fff) get Phys(data[n=4+2000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:79718000 ph data[3]=0:79716000 (2fff) get Phys(data[n=4+3000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:79719000 ph data[3]=0:79716000 (3fff) get Phys(data[n=4+4000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:7971a000 ph data[3]=0:79716000 (4fff) get Phys(data[n=4+5000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:7971b000 set TERM ph data[3]=0:79716000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608ae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608be0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608be0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:79724000 ph data[0]=0:79724000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:79725000 ph data[0]=0:79724000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:7971e000 ph data[1]=0:7971e000 (fff) get Phys(data[n=2+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:7971f000 ph data[1]=0:7971e000 (1fff) get Phys(data[n=2+2000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:79720000 ph data[1]=0:7971e000 (2fff) get Phys(data[n=2+3000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:79721000 ph data[1]=0:7971e000 (3fff) get Phys(data[n=2+4000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:79722000 ph data[1]=0:7971e000 (4fff) get Phys(data[n=2+5000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:79723000 ph data[1]=0:7971e000 (5fff) get Phys(data[n=2+6000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:7972c000 ph data[2]=0:7972c000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:7972d000 ph data[2]=0:7972c000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:79726000 ph data[3]=0:79726000 (fff) get Phys(data[n=4+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:79727000 ph data[3]=0:79726000 (1fff) get Phys(data[n=4+2000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:79728000 ph data[3]=0:79726000 (2fff) get Phys(data[n=4+3000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:79729000 ph data[3]=0:79726000 (3fff) get Phys(data[n=4+4000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:7972a000 ph data[3]=0:79726000 (4fff) get Phys(data[n=4+5000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:7972b000 set TERM ph data[3]=0:79726000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608b60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608be0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608c60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608c60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:7340c000 ph data[0]=0:7340c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:7340d000 ph data[0]=0:7340c000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:73406000 ph data[1]=0:73406000 (fff) get Phys(data[n=2+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:73407000 ph data[1]=0:73406000 (1fff) get Phys(data[n=2+2000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:73408000 ph data[1]=0:73406000 (2fff) get Phys(data[n=2+3000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:73409000 ph data[1]=0:73406000 (3fff) get Phys(data[n=2+4000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:7340a000 ph data[1]=0:73406000 (4fff) get Phys(data[n=2+5000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:7340b000 ph data[1]=0:73406000 (5fff) get Phys(data[n=2+6000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:73414000 ph data[2]=0:73414000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:73415000 ph data[2]=0:73414000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:7340e000 ph data[3]=0:7340e000 (fff) get Phys(data[n=4+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:7340f000 ph data[3]=0:7340e000 (1fff) get Phys(data[n=4+2000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:73410000 ph data[3]=0:7340e000 (2fff) get Phys(data[n=4+3000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:73411000 ph data[3]=0:7340e000 (3fff) get Phys(data[n=4+4000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:73412000 ph data[3]=0:7340e000 (4fff) get Phys(data[n=4+5000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:73413000 set TERM ph data[3]=0:7340e000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608c60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608ce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608ce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:7341c000 ph data[0]=0:7341c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:7341d000 ph data[0]=0:7341c000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:73416000 ph data[1]=0:73416000 (fff) get Phys(data[n=2+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:73417000 ph data[1]=0:73416000 (1fff) get Phys(data[n=2+2000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:73418000 ph data[1]=0:73416000 (2fff) get Phys(data[n=2+3000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:73419000 ph data[1]=0:73416000 (3fff) get Phys(data[n=2+4000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:7341a000 ph data[1]=0:73416000 (4fff) get Phys(data[n=2+5000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:7341b000 ph data[1]=0:73416000 (5fff) get Phys(data[n=2+6000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:73424000 ph data[2]=0:73424000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:73425000 ph data[2]=0:73424000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:7341e000 ph data[3]=0:7341e000 (fff) get Phys(data[n=4+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:7341f000 ph data[3]=0:7341e000 (1fff) get Phys(data[n=4+2000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:73420000 ph data[3]=0:7341e000 (2fff) get Phys(data[n=4+3000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:73421000 ph data[3]=0:7341e000 (3fff) get Phys(data[n=4+4000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:73422000 ph data[3]=0:7341e000 (4fff) get Phys(data[n=4+5000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:73423000 set TERM ph data[3]=0:7341e000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608d60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608d60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:7342c000 ph data[0]=0:7342c000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:7342d000 ph data[0]=0:7342c000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:73426000 ph data[1]=0:73426000 (fff) get Phys(data[n=2+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:73427000 ph data[1]=0:73426000 (1fff) get Phys(data[n=2+2000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:73428000 ph data[1]=0:73426000 (2fff) get Phys(data[n=2+3000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:73429000 ph data[1]=0:73426000 (3fff) get Phys(data[n=2+4000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:7342a000 ph data[1]=0:73426000 (4fff) get Phys(data[n=2+5000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:7342b000 ph data[1]=0:73426000 (5fff) get Phys(data[n=2+6000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:73434000 ph data[2]=0:73434000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:73435000 ph data[2]=0:73434000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:7342e000 ph data[3]=0:7342e000 (fff) get Phys(data[n=4+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:7342f000 ph data[3]=0:7342e000 (1fff) get Phys(data[n=4+2000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:73430000 ph data[3]=0:7342e000 (2fff) get Phys(data[n=4+3000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:73431000 ph data[3]=0:7342e000 (3fff) get Phys(data[n=4+4000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:73432000 ph data[3]=0:7342e000 (4fff) get Phys(data[n=4+5000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:73433000 set TERM ph data[3]=0:7342e000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608ce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608de0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608de0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:7343c000 ph data[0]=0:7343c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:7343d000 ph data[0]=0:7343c000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:73436000 ph data[1]=0:73436000 (fff) get Phys(data[n=2+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:73437000 ph data[1]=0:73436000 (1fff) get Phys(data[n=2+2000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:73438000 ph data[1]=0:73436000 (2fff) get Phys(data[n=2+3000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:73439000 ph data[1]=0:73436000 (3fff) get Phys(data[n=2+4000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:7343a000 ph data[1]=0:73436000 (4fff) get Phys(data[n=2+5000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:7343b000 ph data[1]=0:73436000 (5fff) get Phys(data[n=2+6000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:73444000 ph data[2]=0:73444000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:73445000 ph data[2]=0:73444000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:7343e000 ph data[3]=0:7343e000 (fff) get Phys(data[n=4+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:7343f000 ph data[3]=0:7343e000 (1fff) get Phys(data[n=4+2000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:73440000 ph data[3]=0:7343e000 (2fff) get Phys(data[n=4+3000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:73441000 ph data[3]=0:7343e000 (3fff) get Phys(data[n=4+4000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:73442000 ph data[3]=0:7343e000 (4fff) get Phys(data[n=4+5000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:73443000 set TERM ph data[3]=0:7343e000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608d60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa8c0 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608de0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c091e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf390, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf390, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:15ed2000 ph data[0]=0:15ed2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:260f3000 ph data[1]=0:260f3000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:1e86c000 ph data[2]=0:1e86c000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:1e9ed000 ph data[3]=0:1e9ed000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:1e876000 ph data[4]=0:1e876000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2e497000 ph data[5]=0:2e497000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:269b8000 ph data[6]=0:269b8000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:15ed9000 ph data[7]=0:15ed9000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:260f2000 ph data[8]=0:260f2000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:261a3000 ph data[9]=0:261a3000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:260d4000 ph data[10]=0:260d4000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:28675000 ph data[11]=0:28675000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:1e9fe000 ph data[12]=0:1e9fe000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:38caf000 ph data[13]=0:38caf000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:26b80000 ph data[14]=0:26b80000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:261a1000 set TERM ph data[15]=0:261a1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf390, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c091e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf410, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf410, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:261a2000 ph data[0]=0:261a2000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:2a27b000 ph data[1]=0:2a27b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:38c74000 ph data[2]=0:38c74000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:2e62d000 ph data[3]=0:2e62d000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2e626000 ph data[4]=0:2e626000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:28607000 ph data[5]=0:28607000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:38c50000 ph data[6]=0:38c50000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:269b9000 ph data[7]=0:269b9000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:269b2000 ph data[8]=0:269b2000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:38c93000 ph data[9]=0:38c93000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:38bac000 ph data[10]=0:38bac000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2e635000 ph data[11]=0:2e635000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c18e000 ph data[12]=0:c18e000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:291df000 ph data[13]=0:291df000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:38c48000 ph data[14]=0:38c48000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:37821000 set TERM ph data[15]=0:37821000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c091e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf490, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf490, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:2e622000 ph data[0]=0:2e622000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:15e73000 ph data[1]=0:15e73000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:28674000 ph data[2]=0:28674000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2e63d000 ph data[3]=0:2e63d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38d46000 ph data[4]=0:38d46000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:65fa7000 ph data[5]=0:65fa7000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:286a8000 ph data[6]=0:286a8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:37819000 ph data[7]=0:37819000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:15e52000 ph data[8]=0:15e52000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:10a43000 ph data[9]=0:10a43000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:13074000 ph data[10]=0:13074000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:2e625000 ph data[11]=0:2e625000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3781e000 ph data[12]=0:3781e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:15e6f000 ph data[13]=0:15e6f000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:291d8000 ph data[14]=0:291d8000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:291e1000 set TERM ph data[15]=0:291e1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c091e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf510, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf510, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:38d22000 ph data[0]=0:38d22000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:1286b000 ph data[1]=0:1286b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:15e74000 ph data[2]=0:15e74000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:35905000 ph data[3]=0:35905000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:15dfe000 ph data[4]=0:15dfe000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:12847000 ph data[5]=0:12847000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:15e38000 ph data[6]=0:15e38000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:15e81000 ph data[7]=0:15e81000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:15d7a000 ph data[8]=0:15d7a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:3f6d3000 ph data[9]=0:3f6d3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:3f6d4000 ph data[9]=0:3f6d3000 (1fff) get Phys(data[n=10+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:15db5000 ph data[10]=0:15db5000 (fff) get Phys(data[n=11+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:10a6e000 ph data[11]=0:10a6e000 (fff) get Phys(data[n=12+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:2e627000 ph data[12]=0:2e627000 (fff) get Phys(data[n=13+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:2c960000 ph data[13]=0:2c960000 (fff) get Phys(data[n=14+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:15e89000 set TERM ph data[14]=0:15e89000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf410, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf490, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf510, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c091e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf390, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf390, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3f7f2000 ph data[0]=0:3f7f2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:2e6cb000 ph data[1]=0:2e6cb000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:2c904000 ph data[2]=0:2c904000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bca5000 ph data[3]=0:bca5000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3b35e000 ph data[4]=0:3b35e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:2c8e7000 ph data[5]=0:2c8e7000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2c968000 ph data[6]=0:2c968000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:11a91000 ph data[7]=0:11a91000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:2e592000 ph data[8]=0:2e592000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:2a2c3000 ph data[9]=0:2a2c3000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:2c90c000 ph data[10]=0:2c90c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:1304d000 ph data[11]=0:1304d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:2e576000 ph data[12]=0:2e576000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:2c8ef000 ph data[13]=0:2c8ef000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:2c970000 ph data[14]=0:2c970000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:28499000 set TERM ph data[15]=0:28499000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf390, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c091e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf410, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf410, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:2e6ba000 ph data[0]=0:2e6ba000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:2c98b000 ph data[1]=0:2c98b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2c8dc000 ph data[2]=0:2c8dc000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:3f8d5000 ph data[3]=0:3f8d5000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:2a2be000 ph data[4]=0:2a2be000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:2e52f000 ph data[5]=0:2e52f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2e640000 ph data[6]=0:2e640000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:2a261000 ph data[7]=0:2a261000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:2b7f2000 ph data[8]=0:2b7f2000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:11a1b000 ph data[9]=0:11a1b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:290ac000 ph data[10]=0:290ac000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2e6c5000 ph data[11]=0:2e6c5000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:2e536000 ph data[12]=0:2e536000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:137af000 ph data[13]=0:137af000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:12290000 ph data[14]=0:12290000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:2afc9000 set TERM ph data[15]=0:2afc9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c091e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf490, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf490, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:2c97a000 ph data[0]=0:2c97a000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:10aa3000 ph data[1]=0:10aa3000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:10a9c000 ph data[2]=0:10a9c000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2b725000 ph data[3]=0:2b725000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:11a86000 ph data[4]=0:11a86000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:137b7000 ph data[5]=0:137b7000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:12fd8000 ph data[6]=0:12fd8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:12fc1000 ph data[7]=0:12fc1000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:12322000 ph data[8]=0:12322000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:12113000 ph data[9]=0:12113000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:137a4000 ph data[10]=0:137a4000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:285e5000 ph data[11]=0:285e5000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:1087e000 ph data[12]=0:1087e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:137bf000 ph data[13]=0:137bf000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:137a0000 ph data[14]=0:137a0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:137b1000 set TERM ph data[15]=0:137b1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf410, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c091e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf510, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf510, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:11ab2000 ph data[0]=0:11ab2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:1379b000 ph data[1]=0:1379b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:137ac000 ph data[2]=0:137ac000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:12fd5000 ph data[3]=0:12fd5000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2e52e000 ph data[4]=0:2e52e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:137c7000 ph data[5]=0:137c7000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:137a8000 ph data[6]=0:137a8000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:137b9000 ph data[7]=0:137b9000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:137b2000 ph data[8]=0:137b2000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:137a3000 ph data[9]=0:137a3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:137b4000 ph data[10]=0:137b4000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:1285d000 ph data[11]=0:1285d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:1382e000 ph data[12]=0:1382e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:137cf000 ph data[13]=0:137cf000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:137b0000 ph data[14]=0:137b0000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:137c1000 set TERM ph data[15]=0:137c1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf490, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf510, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0960c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf390, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fcf390, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:15e52000 ph data[0]=0:15e52000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:10a43000 set TERM ph data[1]=0:10a43000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf390, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x2, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (dll/ntdll/ldr/ldrutils.c:1335) LDR: LdrpMapDll Relocating Image Name C:\ReactOS\System32\shellbtrfs.dll (735E0000-73767000 -> 01BE0000) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960e060, OrigWordsRequested 0x6900, DevSize 0x69 IdeReadWrite (REQ): Starting sector is 3960e060, Number of WORDS 0x6900, DevSize 0x69 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6fb2000, count d200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6fb2000) AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:15db5000 ph data[0]=0:15db5000 (fff) get Phys(data[n=1+1000]=f6fb3000) AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:10a6e000 ph data[1]=0:10a6e000 (fff) get Phys(data[n=2+1000]=f6fb4000) AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:2e627000 ph data[2]=0:2e627000 (fff) get Phys(data[n=3+1000]=f6fb5000) AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:2c960000 ph data[3]=0:2c960000 (fff) get Phys(data[n=4+1000]=f6fb6000) AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:15e89000 ph data[4]=0:15e89000 (fff) get Phys(data[n=5+1000]=f6fb7000) AtapiVirtToPhysAddr_: f6fb7000 -> 00000000:15d7a000 ph data[5]=0:15d7a000 (fff) get Phys(data[n=6+1000]=f6fb8000) AtapiVirtToPhysAddr_: f6fb8000 -> 00000000:3f6d3000 ph data[6]=0:3f6d3000 (fff) get Phys(data[n=7+1000]=f6fb9000) AtapiVirtToPhysAddr_: f6fb9000 -> 00000000:15e74000 ph data[7]=0:15e74000 (fff) get Phys(data[n=8+1000]=f6fba000) AtapiVirtToPhysAddr_: f6fba000 -> 00000000:35905000 ph data[8]=0:35905000 (fff) get Phys(data[n=9+1000]=f6fbb000) AtapiVirtToPhysAddr_: f6fbb000 -> 00000000:15dfe000 ph data[9]=0:15dfe000 (fff) get Phys(data[n=10+1000]=f6fbc000) AtapiVirtToPhysAddr_: f6fbc000 -> 00000000:12847000 ph data[10]=0:12847000 (fff) get Phys(data[n=11+1000]=f6fbd000) AtapiVirtToPhysAddr_: f6fbd000 -> 00000000:15e38000 ph data[11]=0:15e38000 (fff) get Phys(data[n=12+1000]=f6fbe000) AtapiVirtToPhysAddr_: f6fbe000 -> 00000000:15e81000 ph data[12]=0:15e81000 (fff) get Phys(data[n=13+1000]=f6fbf000) AtapiVirtToPhysAddr_: f6fbf000 -> 00000000:38d22000 set TERM ph data[13]=0:38d22000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960e060, Count 0x69(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xe, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request (dll/ntdll/ldr/ldrutils.c:1374) Overlapping DLL: C:\ReactOS\System32\shdocvw.dll TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf990, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf990, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:1378e000 ph data[0]=0:1378e000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:137df000 ph data[1]=0:137df000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:137b8000 ph data[2]=0:137b8000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:137c9000 ph data[3]=0:137c9000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:137c2000 ph data[4]=0:137c2000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:137b3000 ph data[5]=0:137b3000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:10a5c000 ph data[6]=0:10a5c000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:1379d000 ph data[7]=0:1379d000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:13796000 ph data[8]=0:13796000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:137e7000 ph data[9]=0:137e7000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:137c0000 ph data[10]=0:137c0000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:137d1000 ph data[11]=0:137d1000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:137ca000 ph data[12]=0:137ca000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:137bb000 ph data[13]=0:137bb000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:10a64000 ph data[14]=0:10a64000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:137a5000 set TERM ph data[15]=0:137a5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcfa10, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcfa10, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:1379e000 ph data[0]=0:1379e000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:1234f000 ph data[1]=0:1234f000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:137c8000 ph data[2]=0:137c8000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:137d9000 ph data[3]=0:137d9000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:137d2000 ph data[4]=0:137d2000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:137c3000 ph data[5]=0:137c3000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:10a6c000 ph data[6]=0:10a6c000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:137ad000 ph data[7]=0:137ad000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:137a6000 ph data[8]=0:137a6000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:10b87000 ph data[9]=0:10b87000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:137d0000 ph data[10]=0:137d0000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:137e1000 ph data[11]=0:137e1000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:137da000 ph data[12]=0:137da000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:137cb000 ph data[13]=0:137cb000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:10a74000 ph data[14]=0:10a74000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:137b5000 set TERM ph data[15]=0:137b5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcfa90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcfa90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:137ae000 ph data[0]=0:137ae000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3f93f000 ph data[1]=0:3f93f000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:137d8000 ph data[2]=0:137d8000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:137e9000 ph data[3]=0:137e9000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:137e2000 ph data[4]=0:137e2000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:137d3000 ph data[5]=0:137d3000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:12264000 ph data[6]=0:12264000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:137bd000 ph data[7]=0:137bd000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:137b6000 ph data[8]=0:137b6000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3f7e7000 ph data[9]=0:3f7e7000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:11aa8000 ph data[10]=0:11aa8000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:12fb9000 ph data[11]=0:12fb9000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:11a3a000 ph data[12]=0:11a3a000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:109c3000 ph data[13]=0:109c3000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:10aa4000 ph data[14]=0:10aa4000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:137c5000 set TERM ph data[15]=0:137c5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcfb10, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcfb10, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:137be000 ph data[0]=0:137be000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:109bf000 ph data[1]=0:109bf000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:12288000 ph data[2]=0:12288000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:12859000 ph data[3]=0:12859000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:11ac2000 ph data[4]=0:11ac2000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:12feb000 ph data[5]=0:12feb000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:120f4000 ph data[6]=0:120f4000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:137cd000 ph data[7]=0:137cd000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:137c6000 ph data[8]=0:137c6000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:1235f000 ph data[9]=0:1235f000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:12348000 ph data[10]=0:12348000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:11a79000 ph data[11]=0:11a79000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:12352000 ph data[12]=0:12352000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:12863000 ph data[13]=0:12863000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afcac000 ph data[14]=0:afcac000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:137d5000 set TERM ph data[15]=0:137d5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 6900, WordsLeft 6900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered d200, full size d200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf990, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcfa10, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcfa90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcfb10, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf590, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf590, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:2e506000 ph data[0]=0:2e506000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:1e64f000 ph data[1]=0:1e64f000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3f878000 ph data[2]=0:3f878000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:11ad9000 ph data[3]=0:11ad9000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:2e582000 ph data[4]=0:2e582000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:269d3000 ph data[5]=0:269d3000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:2878c000 ph data[6]=0:2878c000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:269fd000 ph data[7]=0:269fd000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:2e53e000 ph data[8]=0:2e53e000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:12237000 ph data[9]=0:12237000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:11aa0000 ph data[10]=0:11aa0000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:15e29000 ph data[11]=0:15e29000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:2878a000 ph data[12]=0:2878a000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:260fb000 ph data[13]=0:260fb000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:28784000 ph data[14]=0:28784000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:269f5000 set TERM ph data[15]=0:269f5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf590, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf610, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf610, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:2a2de000 ph data[0]=0:2a2de000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3f81f000 ph data[1]=0:3f81f000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:2e5a8000 ph data[2]=0:2e5a8000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:3f909000 ph data[3]=0:3f909000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:15e5a000 ph data[4]=0:15e5a000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3f79b000 ph data[5]=0:3f79b000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2afc4000 ph data[6]=0:2afc4000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:269ed000 ph data[7]=0:269ed000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3f7ce000 ph data[8]=0:3f7ce000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:2e5c7000 ph data[9]=0:2e5c7000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:12340000 ph data[10]=0:12340000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:2e579000 ph data[11]=0:2e579000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3fe1a000 ph data[12]=0:3fe1a000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:2e5eb000 ph data[13]=0:2e5eb000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:2e614000 ph data[14]=0:2e614000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:269e5000 set TERM ph data[15]=0:269e5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c094cc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf610, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf690, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf690, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:11a9e000 ph data[0]=0:11a9e000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:2e5b7000 ph data[1]=0:2e5b7000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:2e5f0000 ph data[2]=0:2e5f0000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:2e569000 ph data[3]=0:2e569000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38a32000 ph data[4]=0:38a32000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:2e5e3000 ph data[5]=0:2e5e3000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:2877c000 ph data[6]=0:2877c000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3f795000 ph data[7]=0:3f795000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:2a2d6000 ph data[8]=0:2a2d6000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:1223f000 ph data[9]=0:1223f000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:2eda8000 ph data[10]=0:2eda8000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:02729000 ph data[11]=0:2729000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:11ad2000 ph data[12]=0:11ad2000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:2e423000 ph data[13]=0:2e423000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:28824000 ph data[14]=0:28824000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:28705000 set TERM ph data[15]=0:28705000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c094d4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf690, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf710, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf710, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:6777e000 ph data[0]=0:6777e000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:285df000 ph data[1]=0:285df000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:2a260000 ph data[2]=0:2a260000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2c9a1000 ph data[3]=0:2c9a1000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:2c982000 ph data[4]=0:2c982000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:286b3000 ph data[5]=0:286b3000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:26a0c000 ph data[6]=0:26a0c000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:2e5ed000 ph data[7]=0:2e5ed000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2e5be000 ph data[8]=0:2e5be000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:2b747000 ph data[9]=0:2b747000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:2e5b8000 ph data[10]=0:2e5b8000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f751000 ph data[11]=0:3f751000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:2c98a000 ph data[12]=0:2c98a000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:286ab000 ph data[13]=0:286ab000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:26a04000 ph data[14]=0:26a04000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:3f78d000 set TERM ph data[15]=0:3f78d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf710, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf790, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf790, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0c0e5000 ph data[0]=0:c0e5000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:2880e000 ph data[1]=0:2880e000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:38c57000 ph data[2]=0:38c57000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:28818000 ph data[3]=0:28818000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f7e1000 ph data[4]=0:3f7e1000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:269e2000 ph data[5]=0:269e2000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3f7d3000 ph data[6]=0:3f7d3000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:2e60c000 ph data[7]=0:2e60c000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0c0dd000 ph data[8]=0:c0dd000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:28816000 ph data[9]=0:28816000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3cacf000 ph data[10]=0:3cacf000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:28820000 ph data[11]=0:28820000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f7d1000 ph data[12]=0:3f7d1000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:269da000 ph data[13]=0:269da000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:2e513000 ph data[14]=0:2e513000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:2e5f4000 set TERM ph data[15]=0:2e5f4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf790, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf810, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf810, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0c0d5000 ph data[0]=0:c0d5000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:2881e000 ph data[1]=0:2881e000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0c09f000 ph data[2]=0:c09f000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:26a00000 ph data[3]=0:26a00000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f7d9000 ph data[4]=0:3f7d9000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:269d2000 ph data[5]=0:269d2000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:2e50b000 ph data[6]=0:2e50b000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:3f93c000 ph data[7]=0:3f93c000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0c08d000 ph data[8]=0:c08d000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:291e6000 ph data[9]=0:291e6000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0c097000 ph data[10]=0:c097000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:269f0000 ph data[11]=0:269f0000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c051000 ph data[12]=0:c051000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:269ca000 ph data[13]=0:269ca000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c07b000 ph data[14]=0:c07b000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:287ac000 set TERM ph data[15]=0:287ac000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c094b4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf810, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf890, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf890, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:388cd000 ph data[0]=0:388cd000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:269fe000 ph data[1]=0:269fe000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0c08f000 ph data[2]=0:c08f000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:269e8000 ph data[3]=0:269e8000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0c049000 ph data[4]=0:c049000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:26122000 ph data[5]=0:26122000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0c073000 ph data[6]=0:c073000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:2c984000 ph data[7]=0:2c984000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0c085000 ph data[8]=0:c085000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:269f6000 ph data[9]=0:269f6000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0c087000 ph data[10]=0:c087000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:2ed90000 ph data[11]=0:2ed90000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c041000 ph data[12]=0:c041000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:1e912000 ph data[13]=0:1e912000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c06b000 ph data[14]=0:c06b000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:60cbc000 set TERM ph data[15]=0:60cbc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf890, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf910, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf910, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:38d1d000 ph data[0]=0:38d1d000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:3f7b6000 ph data[1]=0:3f7b6000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0c07f000 ph data[2]=0:c07f000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:2e5a0000 ph data[3]=0:2e5a0000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c039000 ph data[4]=0:c039000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:1e922000 ph data[5]=0:1e922000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c063000 ph data[6]=0:c063000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0c114000 ph data[7]=0:c114000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:2e495000 ph data[8]=0:2e495000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:3f7be000 ph data[9]=0:3f7be000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0c077000 ph data[10]=0:c077000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:2e590000 ph data[11]=0:2e590000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c031000 ph data[12]=0:c031000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:38c4a000 ph data[13]=0:38c4a000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0c05b000 ph data[14]=0:c05b000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0c10c000 set TERM ph data[15]=0:c10c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf910, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcfb90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcfb90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0c027000 ph data[0]=0:c027000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:3fe20000 ph data[1]=0:3fe20000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bfd9000 ph data[2]=0:bfd9000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0c0e2000 ph data[3]=0:c0e2000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f7f3000 ph data[4]=0:3f7f3000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0c08c000 ph data[5]=0:c08c000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0c01d000 ph data[6]=0:c01d000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:36a8e000 ph data[7]=0:36a8e000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:3f7ff000 ph data[8]=0:3f7ff000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3ff00000 ph data[9]=0:3ff00000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3eca9000 ph data[10]=0:3eca9000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0c09a000 ph data[11]=0:c09a000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bffb000 ph data[12]=0:bffb000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0c084000 ph data[13]=0:c084000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0c015000 ph data[14]=0:c015000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:2e4c6000 set TERM ph data[15]=0:2e4c6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcfb90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcfc10, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcfc10, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3f807000 ph data[0]=0:3f807000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3fe18000 ph data[1]=0:3fe18000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bfd1000 ph data[2]=0:bfd1000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0c092000 ph data[3]=0:c092000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f7fb000 ph data[4]=0:3f7fb000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0c07c000 ph data[5]=0:c07c000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3f725000 ph data[6]=0:3f725000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:2e46e000 ph data[7]=0:2e46e000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3fe17000 ph data[8]=0:3fe17000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0c160000 ph data[9]=0:c160000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3f841000 ph data[10]=0:3f841000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3f7fa000 ph data[11]=0:3f7fa000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3f803000 ph data[12]=0:3f803000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0c074000 ph data[13]=0:c074000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c00d000 ph data[14]=0:c00d000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0c10e000 set TERM ph data[15]=0:c10e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c094cc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcfc10, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcfc90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcfc90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:647cf000 ph data[0]=0:647cf000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0c158000 ph data[1]=0:c158000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:662b1000 ph data[2]=0:662b1000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:38d32000 ph data[3]=0:38d32000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3f80b000 ph data[4]=0:3f80b000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0c06c000 ph data[5]=0:c06c000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:3c4f5000 ph data[6]=0:3c4f5000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0c106000 ph data[7]=0:c106000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:647d7000 ph data[8]=0:647d7000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0c150000 ph data[9]=0:c150000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:662b9000 ph data[10]=0:662b9000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f6f2000 ph data[11]=0:3f6f2000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f813000 ph data[12]=0:3f813000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0c064000 ph data[13]=0:c064000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c005000 ph data[14]=0:c005000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0c0fe000 set TERM ph data[15]=0:c0fe000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c094d4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcfc90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcfd10, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcfd10, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:65f77000 ph data[0]=0:65f77000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0c148000 ph data[1]=0:c148000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:662c1000 ph data[2]=0:662c1000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0c08a000 ph data[3]=0:c08a000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3fe33000 ph data[4]=0:3fe33000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0c05c000 ph data[5]=0:c05c000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3898d000 ph data[6]=0:3898d000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0c0f6000 ph data[7]=0:c0f6000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:65f7f000 ph data[8]=0:65f7f000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0c140000 ph data[9]=0:c140000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:662c9000 ph data[10]=0:662c9000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0c082000 ph data[11]=0:c082000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3fe2b000 ph data[12]=0:3fe2b000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0c054000 ph data[13]=0:c054000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3f7a5000 ph data[14]=0:3f7a5000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0c0ee000 set TERM ph data[15]=0:c0ee000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcfd10, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09174 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0c011000 ph data[0]=0:c011000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c0fa000 set TERM ph data[1]=0:c0fa000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08d00 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0c001000 ph data[0]=0:c001000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:1d392000 set TERM ph data[1]=0:1d392000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09230 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4 IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c40000, count 800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0c019000 set TERM ph data[0]=0:c019000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39058710, Count 0x4(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x1, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 err:(dll/win32/shell32/CDefaultContextMenu.cpp:389) IShellExtInit::Initialize failed.clsid {2690b74f-f353-422d-bb12-401581eef8f1} hr 0x80004005 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09230 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe7720, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 38fe7720, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0c043000 ph data[0]=0:c043000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:11a6c000 set TERM ph data[1]=0:11a6c000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe7720, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09230 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe7720, OrigWordsRequested 0xc00, DevSize 0xc IdeReadWrite (REQ): Starting sector is 38fe7720, Number of WORDS 0xc00, DevSize 0xc AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6c40000, count 1800, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0c04b000 ph data[0]=0:c04b000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c034000 set TERM ph data[1]=0:c034000 (7ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe7720, Count 0xc(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered c00, WordsLeft c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1800, full size 1800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1970, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1970, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:1231e000 ph data[0]=0:1231e000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0c01f000 ph data[1]=0:c01f000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:12338000 ph data[2]=0:12338000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0c021000 ph data[3]=0:c021000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:2c972000 ph data[4]=0:2c972000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0c043000 ph data[5]=0:c043000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:11a6c000 ph data[6]=0:11a6c000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0c06d000 ph data[7]=0:c06d000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:645c6000 ph data[8]=0:645c6000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:38b27000 ph data[9]=0:38b27000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3fe28000 ph data[10]=0:3fe28000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bf99000 ph data[11]=0:bf99000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f802000 ph data[12]=0:3f802000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0c023000 ph data[13]=0:c023000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3f80c000 ph data[14]=0:3f80c000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0c045000 set TERM ph data[15]=0:c045000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1970, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff19f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff19f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0c0a6000 ph data[0]=0:c0a6000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bfd7000 ph data[1]=0:bfd7000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0c0e8000 ph data[2]=0:c0e8000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bfa1000 ph data[3]=0:bfa1000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0c02a000 ph data[4]=0:c02a000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bfbb000 ph data[5]=0:bfbb000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3f804000 ph data[6]=0:3f804000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bfdd000 ph data[7]=0:bfdd000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0c0ae000 ph data[8]=0:c0ae000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bfdf000 ph data[9]=0:bfdf000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3f900000 ph data[10]=0:3f900000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bfa9000 ph data[11]=0:bfa9000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c032000 ph data[12]=0:c032000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bfc3000 ph data[13]=0:bfc3000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c024000 ph data[14]=0:c024000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bfe5000 set TERM ph data[15]=0:bfe5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1a70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1a70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:6424e000 ph data[0]=0:6424e000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bfe7000 ph data[1]=0:bfe7000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0c0f0000 ph data[2]=0:c0f0000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bfb1000 ph data[3]=0:bfb1000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0c03a000 ph data[4]=0:c03a000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bfcb000 ph data[5]=0:bfcb000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38b64000 ph data[6]=0:38b64000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bfed000 ph data[7]=0:bfed000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0c0b6000 ph data[8]=0:c0b6000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bfef000 ph data[9]=0:bfef000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0c0f8000 ph data[10]=0:c0f8000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bfb9000 ph data[11]=0:bfb9000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c042000 ph data[12]=0:c042000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bfd3000 ph data[13]=0:bfd3000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c02c000 ph data[14]=0:c02c000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bff5000 set TERM ph data[15]=0:bff5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1af0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1af0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0c0be000 ph data[0]=0:c0be000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bff7000 ph data[1]=0:bff7000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:38d20000 ph data[2]=0:38d20000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bfc1000 ph data[3]=0:bfc1000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c04a000 ph data[4]=0:c04a000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bfdb000 ph data[5]=0:bfdb000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:360cc000 ph data[6]=0:360cc000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bf75000 ph data[7]=0:bf75000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0c176000 ph data[8]=0:c176000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bfff000 ph data[9]=0:bfff000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0c100000 ph data[10]=0:c100000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0c011000 ph data[11]=0:c011000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c0fa000 ph data[12]=0:c0fa000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bfe3000 ph data[13]=0:bfe3000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3f7ec000 ph data[14]=0:3f7ec000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bf7d000 set TERM ph data[15]=0:bf7d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff19f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1a70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c55ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1af0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec68 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3905c540, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3905c540, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bf9d000 ph data[0]=0:bf9d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c0de000 set TERM ph data[1]=0:c0de000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3905c540, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec68 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3904e750, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3904e750, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bfbd000 ph data[0]=0:bfbd000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c096000 set TERM ph data[1]=0:c096000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3904e750, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (dll/win32/kernel32/client/loader.c:384) LoadLibraryExW(rshell.dll) failing with status c0000135 fixme:(dll/win32/comctl32/toolbar.c:394) [000300DE] TBSTYLE_REGISTERDROP not implemented fixme:(dll/win32/comctl32/toolbar.c:394) [000400DC] TBSTYLE_REGISTERDROP not implemented fixme:(dll/win32/comctl32/toolbar.c:5508) hwnd=000400DC wParam 00000001 lParam 00000000 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2af0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2af0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bb64000 ph data[0]=0:bb64000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bddd000 ph data[1]=0:bddd000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bdd6000 ph data[2]=0:bdd6000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bdd7000 ph data[2]=0:bdd6000 (1fff) get Phys(data[n=3+2000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0be18000 ph data[3]=0:be18000 (fff) get Phys(data[n=4+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bbb9000 ph data[4]=0:bbb9000 (fff) get Phys(data[n=5+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bbf2000 ph data[5]=0:bbf2000 (fff) get Phys(data[n=6+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bdbb000 ph data[6]=0:bdbb000 (fff) get Phys(data[n=7+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bb5c000 ph data[7]=0:bb5c000 (fff) get Phys(data[n=8+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bdd5000 ph data[8]=0:bdd5000 (fff) get Phys(data[n=9+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bdce000 ph data[9]=0:bdce000 (fff) get Phys(data[n=10+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bc07000 ph data[10]=0:bc07000 (fff) get Phys(data[n=11+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0be10000 ph data[11]=0:be10000 (fff) get Phys(data[n=12+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bbb1000 ph data[12]=0:bbb1000 (fff) get Phys(data[n=13+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bbea000 ph data[13]=0:bbea000 (fff) get Phys(data[n=14+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bdb3000 set TERM ph data[14]=0:bdb3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2af0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2b70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2b70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bb54000 ph data[0]=0:bb54000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bdcd000 ph data[1]=0:bdcd000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bdc6000 ph data[2]=0:bdc6000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bbff000 ph data[3]=0:bbff000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bc40000 ph data[4]=0:bc40000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bba9000 ph data[5]=0:bba9000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bbe2000 ph data[6]=0:bbe2000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bbcb000 ph data[7]=0:bbcb000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bb4c000 ph data[8]=0:bb4c000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bdc5000 ph data[9]=0:bdc5000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bdbe000 ph data[10]=0:bdbe000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bbf7000 ph data[11]=0:bbf7000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bc38000 ph data[12]=0:bc38000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bba1000 ph data[13]=0:bba1000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb52000 ph data[14]=0:bb52000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bbc3000 set TERM ph data[15]=0:bbc3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2bf0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2bf0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bb44000 ph data[0]=0:bb44000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bdbd000 ph data[1]=0:bdbd000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bdb6000 ph data[2]=0:bdb6000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bbef000 ph data[3]=0:bbef000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bc30000 ph data[4]=0:bc30000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bb99000 ph data[5]=0:bb99000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bb4a000 ph data[6]=0:bb4a000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bbbb000 ph data[7]=0:bbbb000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bb3c000 ph data[8]=0:bb3c000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bdb5000 ph data[9]=0:bdb5000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bbe6000 ph data[10]=0:bbe6000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bbe7000 ph data[10]=0:bbe6000 (1fff) get Phys(data[n=11+2000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bc28000 ph data[11]=0:bc28000 (fff) get Phys(data[n=12+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bb91000 ph data[12]=0:bb91000 (fff) get Phys(data[n=13+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bb42000 ph data[13]=0:bb42000 (fff) get Phys(data[n=14+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bbb3000 set TERM ph data[14]=0:bbb3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fd2c70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fd2c70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bbb4000 ph data[0]=0:bbb4000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bbe5000 ph data[1]=0:bbe5000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bbde000 ph data[2]=0:bbde000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bbdf000 ph data[2]=0:bbde000 (1fff) get Phys(data[n=3+2000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0bc20000 ph data[3]=0:bc20000 (fff) get Phys(data[n=4+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bb89000 ph data[4]=0:bb89000 (fff) get Phys(data[n=5+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bb3a000 ph data[5]=0:bb3a000 (fff) get Phys(data[n=6+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bbab000 ph data[6]=0:bbab000 (fff) get Phys(data[n=7+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bbac000 ph data[6]=0:bbab000 (1fff) get Phys(data[n=7+2000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bbdd000 ph data[7]=0:bbdd000 (fff) get Phys(data[n=8+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bbd6000 ph data[8]=0:bbd6000 (fff) get Phys(data[n=9+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bbd7000 ph data[8]=0:bbd6000 (1fff) get Phys(data[n=9+2000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bc18000 ph data[9]=0:bc18000 (fff) get Phys(data[n=10+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bb81000 ph data[10]=0:bb81000 (fff) get Phys(data[n=11+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bb32000 ph data[11]=0:bb32000 (fff) get Phys(data[n=12+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bba3000 set TERM ph data[12]=0:bba3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2b70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2bf0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xf, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fd2c70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xd, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 fixme:(dll/win32/shlwapi/url.c:2532) stub (win32ss/user/ntuser/winpos.c:3325) err: NtUserSetWindowPos bad window handle! (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b fixme:(dll/win32/comctl32/toolbar.c:5624) [000300DE] response 2086801769 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) fixme:(dll/win32/comctl32/toolbar.c:5661) [000300DE] response 2086801769 not handled to NM_CUSTOMDRAW (CDDS_POSTERASE) fixme:(dll/win32/comctl32/toolbar.c:5624) [000300DE] response 2614696 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b fixme:(dll/win32/comctl32/toolbar.c:5624) [000300DE] response 2614696 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) (win32ss/user/ntuser/winpos.c:3325) err: NtUserSetWindowPos bad window handle! (win32ss/user/ntuser/winpos.c:3325) err: NtUserSetWindowPos bad window handle! WARNING: NtUserLockWindowUpdate at win32ss/user/ntuser/ntstubs.c:950 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba82000 ph data[0]=0:ba82000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb0b000 ph data[1]=0:bb0b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba84000 ph data[2]=0:ba84000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb75000 ph data[3]=0:bb75000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb06000 ph data[4]=0:bb06000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb3f000 ph data[5]=0:bb3f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bb58000 ph data[6]=0:bb58000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bae9000 ph data[7]=0:bae9000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba7a000 ph data[8]=0:ba7a000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb03000 ph data[9]=0:bb03000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba3c000 ph data[10]=0:ba3c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb6d000 ph data[11]=0:bb6d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bafe000 ph data[12]=0:bafe000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb37000 ph data[13]=0:bb37000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb50000 ph data[14]=0:bb50000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bae1000 set TERM ph data[15]=0:bae1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba72000 ph data[0]=0:ba72000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bafb000 ph data[1]=0:bafb000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba34000 ph data[2]=0:ba34000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb65000 ph data[3]=0:bb65000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0baf6000 ph data[4]=0:baf6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb2f000 ph data[5]=0:bb2f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb48000 ph data[6]=0:bb48000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bad9000 ph data[7]=0:bad9000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0ba6a000 ph data[8]=0:ba6a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0baf3000 ph data[9]=0:baf3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0ba2c000 ph data[10]=0:ba2c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb1d000 ph data[11]=0:bb1d000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0baee000 ph data[12]=0:baee000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb27000 ph data[13]=0:bb27000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb40000 ph data[14]=0:bb40000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bad1000 set TERM ph data[15]=0:bad1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0ba62000 ph data[0]=0:ba62000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0baeb000 ph data[1]=0:baeb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0ba24000 ph data[2]=0:ba24000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb15000 ph data[3]=0:bb15000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bae6000 ph data[4]=0:bae6000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bb1f000 ph data[5]=0:bb1f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0baf8000 ph data[6]=0:baf8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bac9000 ph data[7]=0:bac9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0ba5a000 ph data[8]=0:ba5a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bae3000 ph data[9]=0:bae3000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0ba1c000 ph data[10]=0:ba1c000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bb0d000 ph data[11]=0:bb0d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0ba9e000 ph data[12]=0:ba9e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bb17000 ph data[13]=0:bb17000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0baf0000 ph data[14]=0:baf0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bac1000 set TERM ph data[15]=0:bac1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0ba12000 ph data[0]=0:ba12000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0badb000 ph data[1]=0:badb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0ba14000 ph data[2]=0:ba14000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bb05000 ph data[3]=0:bb05000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0ba96000 ph data[4]=0:ba96000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bb0f000 ph data[5]=0:bb0f000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bae8000 ph data[6]=0:bae8000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bab9000 ph data[7]=0:bab9000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0ba0a000 ph data[8]=0:ba0a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bad3000 ph data[9]=0:bad3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0ba0c000 ph data[10]=0:ba0c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bafd000 ph data[11]=0:bafd000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0ba8e000 ph data[12]=0:ba8e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bb07000 ph data[13]=0:bb07000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bae0000 ph data[14]=0:bae0000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bab1000 set TERM ph data[15]=0:bab1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba8a000 ph data[0]=0:ba8a000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb5b000 ph data[1]=0:bb5b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba94000 ph data[2]=0:ba94000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb7d000 ph data[3]=0:bb7d000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb0e000 ph data[4]=0:bb0e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb8f000 ph data[5]=0:bb8f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bb68000 ph data[6]=0:bb68000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb39000 ph data[7]=0:bb39000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba92000 ph data[8]=0:ba92000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb63000 ph data[9]=0:bb63000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba9c000 ph data[10]=0:ba9c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb85000 ph data[11]=0:bb85000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb16000 ph data[12]=0:bb16000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb97000 ph data[13]=0:bb97000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb70000 ph data[14]=0:bb70000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb41000 set TERM ph data[15]=0:bb41000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0baa2000 ph data[0]=0:baa2000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bb6b000 ph data[1]=0:bb6b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0baa4000 ph data[2]=0:baa4000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb8d000 ph data[3]=0:bb8d000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bb1e000 ph data[4]=0:bb1e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb9f000 ph data[5]=0:bb9f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb78000 ph data[6]=0:bb78000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bb49000 ph data[7]=0:bb49000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0baaa000 ph data[8]=0:baaa000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb73000 ph data[9]=0:bb73000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0baac000 ph data[10]=0:baac000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb95000 ph data[11]=0:bb95000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bb26000 ph data[12]=0:bb26000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bba7000 ph data[13]=0:bba7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb80000 ph data[14]=0:bb80000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bb51000 set TERM ph data[15]=0:bb51000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bab2000 ph data[0]=0:bab2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bb7b000 ph data[1]=0:bb7b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bab4000 ph data[2]=0:bab4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb9d000 ph data[3]=0:bb9d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bb2e000 ph data[4]=0:bb2e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bbaf000 ph data[5]=0:bbaf000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bb88000 ph data[6]=0:bb88000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bb59000 ph data[7]=0:bb59000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bada000 ph data[8]=0:bada000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bb83000 ph data[9]=0:bb83000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0babc000 ph data[10]=0:babc000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bb25000 ph data[11]=0:bb25000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bb3e000 ph data[12]=0:bb3e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bbb7000 ph data[13]=0:bbb7000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bb90000 ph data[14]=0:bb90000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bb61000 set TERM ph data[15]=0:bb61000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea44 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bae2000 ph data[0]=0:bae2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bb8b000 ph data[1]=0:bb8b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bac4000 ph data[2]=0:bac4000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bb2d000 ph data[3]=0:bb2d000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0bb6e000 ph data[4]=0:bb6e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bbbf000 ph data[5]=0:bbbf000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bb98000 ph data[6]=0:bb98000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bb69000 ph data[7]=0:bb69000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0baf2000 ph data[8]=0:baf2000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bb13000 ph data[9]=0:bb13000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bacc000 ph data[10]=0:bacc000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bb35000 ph data[11]=0:bb35000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bb76000 ph data[12]=0:bb76000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bb47000 ph data[13]=0:bb47000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bbc8000 ph data[14]=0:bbc8000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0baf1000 set TERM ph data[15]=0:baf1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba62000 ph data[0]=0:ba62000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0baeb000 ph data[1]=0:baeb000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba24000 ph data[2]=0:ba24000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb15000 ph data[3]=0:bb15000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bae6000 ph data[4]=0:bae6000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb1f000 ph data[5]=0:bb1f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0baf8000 ph data[6]=0:baf8000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bac9000 ph data[7]=0:bac9000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba6a000 ph data[8]=0:ba6a000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0baf3000 ph data[9]=0:baf3000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba2c000 ph data[10]=0:ba2c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb1d000 ph data[11]=0:bb1d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0baee000 ph data[12]=0:baee000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb27000 ph data[13]=0:bb27000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb40000 ph data[14]=0:bb40000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bad1000 set TERM ph data[15]=0:bad1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba72000 ph data[0]=0:ba72000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bafb000 ph data[1]=0:bafb000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba34000 ph data[2]=0:ba34000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb65000 ph data[3]=0:bb65000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0baf6000 ph data[4]=0:baf6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb2f000 ph data[5]=0:bb2f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb48000 ph data[6]=0:bb48000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bad9000 ph data[7]=0:bad9000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0ba7a000 ph data[8]=0:ba7a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb03000 ph data[9]=0:bb03000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0ba3c000 ph data[10]=0:ba3c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb6d000 ph data[11]=0:bb6d000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bafe000 ph data[12]=0:bafe000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb37000 ph data[13]=0:bb37000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb50000 ph data[14]=0:bb50000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bae1000 set TERM ph data[15]=0:bae1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0ba82000 ph data[0]=0:ba82000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bb0b000 ph data[1]=0:bb0b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0ba84000 ph data[2]=0:ba84000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb75000 ph data[3]=0:bb75000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bb06000 ph data[4]=0:bb06000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bb3f000 ph data[5]=0:bb3f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bb58000 ph data[6]=0:bb58000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bae9000 ph data[7]=0:bae9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bb02000 ph data[8]=0:bb02000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bb23000 ph data[9]=0:bb23000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bad4000 ph data[10]=0:bad4000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bb45000 ph data[11]=0:bb45000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bb7e000 ph data[12]=0:bb7e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bb4f000 ph data[13]=0:bb4f000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bbd0000 ph data[14]=0:bbd0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bb01000 set TERM ph data[15]=0:bb01000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbee64 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bdc2000 ph data[0]=0:bdc2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bb2b000 ph data[1]=0:bb2b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0badc000 ph data[2]=0:badc000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bb4d000 ph data[3]=0:bb4d000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0bb8e000 ph data[4]=0:bb8e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bb57000 ph data[5]=0:bb57000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bbd8000 ph data[6]=0:bbd8000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bb11000 ph data[7]=0:bb11000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bdba000 ph data[8]=0:bdba000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bb33000 ph data[9]=0:bb33000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bafc000 ph data[10]=0:bafc000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bb55000 ph data[11]=0:bb55000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bb96000 ph data[12]=0:bb96000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bb67000 ph data[13]=0:bb67000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bbe8000 set TERM ph data[14]=0:bbe8000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xf, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba0a000 ph data[0]=0:ba0a000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bad3000 ph data[1]=0:bad3000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba0c000 ph data[2]=0:ba0c000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bafd000 ph data[3]=0:bafd000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0ba8e000 ph data[4]=0:ba8e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb07000 ph data[5]=0:bb07000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bae0000 ph data[6]=0:bae0000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bab1000 ph data[7]=0:bab1000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba12000 ph data[8]=0:ba12000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0badb000 ph data[9]=0:badb000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba14000 ph data[10]=0:ba14000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb05000 ph data[11]=0:bb05000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0ba96000 ph data[12]=0:ba96000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb0f000 ph data[13]=0:bb0f000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bae8000 ph data[14]=0:bae8000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bab9000 set TERM ph data[15]=0:bab9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba5a000 ph data[0]=0:ba5a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bae3000 ph data[1]=0:bae3000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba1c000 ph data[2]=0:ba1c000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb0d000 ph data[3]=0:bb0d000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0ba9e000 ph data[4]=0:ba9e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb17000 ph data[5]=0:bb17000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0baf0000 ph data[6]=0:baf0000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bac1000 ph data[7]=0:bac1000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bbd2000 ph data[8]=0:bbd2000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0be53000 ph data[9]=0:be53000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bbfc000 ph data[10]=0:bbfc000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0be7d000 ph data[11]=0:be7d000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0be6e000 ph data[12]=0:be6e000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0be6f000 ph data[12]=0:be6e000 (1fff) get Phys(data[n=13+2000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0beb0000 ph data[13]=0:beb0000 (fff) get Phys(data[n=14+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bc41000 set TERM ph data[14]=0:bc41000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bbc2000 ph data[0]=0:bbc2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0be4b000 ph data[1]=0:be4b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bbec000 ph data[2]=0:bbec000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0be75000 ph data[3]=0:be75000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0be66000 ph data[4]=0:be66000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0be1f000 ph data[5]=0:be1f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bea8000 ph data[6]=0:bea8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bc39000 ph data[7]=0:bc39000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bbba000 ph data[8]=0:bbba000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0be3b000 ph data[9]=0:be3b000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bbe4000 ph data[10]=0:bbe4000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0be6d000 ph data[11]=0:be6d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0be5e000 ph data[12]=0:be5e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0be17000 ph data[13]=0:be17000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bea0000 ph data[14]=0:bea0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bc31000 set TERM ph data[15]=0:bc31000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea44 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bba2000 ph data[0]=0:bba2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bdab000 ph data[1]=0:bdab000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bbdc000 ph data[2]=0:bbdc000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0be65000 ph data[3]=0:be65000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0be4e000 ph data[4]=0:be4e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bdcf000 ph data[5]=0:bdcf000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0be98000 ph data[6]=0:be98000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bc21000 ph data[7]=0:bc21000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bbaa000 ph data[8]=0:bbaa000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bda3000 ph data[9]=0:bda3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bbf4000 ph data[10]=0:bbf4000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0be5d000 ph data[11]=0:be5d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0be46000 ph data[12]=0:be46000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bdc7000 ph data[13]=0:bdc7000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0be08000 ph data[14]=0:be08000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bc19000 set TERM ph data[15]=0:bc19000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea44 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba82000 ph data[0]=0:ba82000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb0b000 ph data[1]=0:bb0b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba84000 ph data[2]=0:ba84000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb75000 ph data[3]=0:bb75000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb06000 ph data[4]=0:bb06000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb3f000 ph data[5]=0:bb3f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bb58000 ph data[6]=0:bb58000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bae1000 ph data[7]=0:bae1000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba7a000 ph data[8]=0:ba7a000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb03000 ph data[9]=0:bb03000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba3c000 ph data[10]=0:ba3c000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb6d000 ph data[11]=0:bb6d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bafe000 ph data[12]=0:bafe000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb37000 ph data[13]=0:bb37000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb50000 ph data[14]=0:bb50000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bad9000 set TERM ph data[15]=0:bad9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba72000 ph data[0]=0:ba72000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bafb000 ph data[1]=0:bafb000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba34000 ph data[2]=0:ba34000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb65000 ph data[3]=0:bb65000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0baf6000 ph data[4]=0:baf6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb2f000 ph data[5]=0:bb2f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb48000 ph data[6]=0:bb48000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bad1000 ph data[7]=0:bad1000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0ba6a000 ph data[8]=0:ba6a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0baf3000 ph data[9]=0:baf3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0ba2c000 ph data[10]=0:ba2c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb1d000 ph data[11]=0:bb1d000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0baee000 ph data[12]=0:baee000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb27000 ph data[13]=0:bb27000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb40000 ph data[14]=0:bb40000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bac9000 set TERM ph data[15]=0:bac9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0ba62000 ph data[0]=0:ba62000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0baeb000 ph data[1]=0:baeb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0ba24000 ph data[2]=0:ba24000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb15000 ph data[3]=0:bb15000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bae6000 ph data[4]=0:bae6000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bb1f000 ph data[5]=0:bb1f000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0baf8000 ph data[6]=0:baf8000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bc11000 ph data[7]=0:bc11000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bbca000 ph data[8]=0:bbca000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bc33000 ph data[9]=0:bc33000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bbd4000 ph data[10]=0:bbd4000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0be55000 ph data[11]=0:be55000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0be3e000 ph data[12]=0:be3e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bdbf000 ph data[13]=0:bdbf000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0be00000 ph data[14]=0:be00000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bdb9000 set TERM ph data[15]=0:bdb9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bbb2000 ph data[0]=0:bbb2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bc43000 ph data[1]=0:bc43000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bbcc000 ph data[2]=0:bbcc000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bda5000 ph data[3]=0:bda5000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0bb9e000 ph data[4]=0:bb9e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bb6f000 ph data[5]=0:bb6f000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bbf0000 ph data[6]=0:bbf0000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bdc1000 ph data[7]=0:bdc1000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bb12000 ph data[8]=0:bb12000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bd93000 ph data[9]=0:bd93000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bc2c000 ph data[10]=0:bc2c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bdad000 ph data[11]=0:bdad000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bdae000 ph data[11]=0:bdad000 (1fff) get Phys(data[n=12+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bdb7000 ph data[12]=0:bdb7000 (fff) get Phys(data[n=13+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bdf8000 ph data[13]=0:bdf8000 (fff) get Phys(data[n=14+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bb21000 set TERM ph data[14]=0:bb21000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xf, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba92000 ph data[0]=0:ba92000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb63000 ph data[1]=0:bb63000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba9c000 ph data[2]=0:ba9c000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb85000 ph data[3]=0:bb85000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb0e000 ph data[4]=0:bb0e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb8f000 ph data[5]=0:bb8f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bb68000 ph data[6]=0:bb68000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb39000 ph data[7]=0:bb39000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba8a000 ph data[8]=0:ba8a000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb5b000 ph data[9]=0:bb5b000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba94000 ph data[10]=0:ba94000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb7d000 ph data[11]=0:bb7d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb96000 ph data[12]=0:bb96000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb67000 ph data[13]=0:bb67000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bbe8000 ph data[14]=0:bbe8000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0be31000 set TERM ph data[15]=0:be31000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bdba000 ph data[0]=0:bdba000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bb33000 ph data[1]=0:bb33000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bafc000 ph data[2]=0:bafc000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb55000 ph data[3]=0:bb55000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bb8e000 ph data[4]=0:bb8e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb57000 ph data[5]=0:bb57000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bbd8000 ph data[6]=0:bbd8000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bb11000 ph data[7]=0:bb11000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bdc2000 ph data[8]=0:bdc2000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb2b000 ph data[9]=0:bb2b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0badc000 ph data[10]=0:badc000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb4d000 ph data[11]=0:bb4d000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bb7e000 ph data[12]=0:bb7e000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb4f000 ph data[13]=0:bb4f000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bbd0000 ph data[14]=0:bbd0000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bb01000 set TERM ph data[15]=0:bb01000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bb02000 ph data[0]=0:bb02000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bb23000 ph data[1]=0:bb23000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bad4000 ph data[2]=0:bad4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb45000 ph data[3]=0:bb45000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bd96000 ph data[4]=0:bd96000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bdaf000 ph data[5]=0:bdaf000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bdf0000 ph data[6]=0:bdf0000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bae9000 ph data[7]=0:bae9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bb5a000 ph data[8]=0:bb5a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bd9b000 ph data[9]=0:bd9b000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bc34000 ph data[10]=0:bc34000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0be4d000 ph data[11]=0:be4d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bd9e000 ph data[12]=0:bd9e000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bd97000 ph data[13]=0:bd97000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bdd8000 ph data[14]=0:bdd8000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bb29000 set TERM ph data[15]=0:bb29000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbee64 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bb62000 ph data[0]=0:bb62000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bb43000 ph data[1]=0:bb43000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bb0c000 ph data[2]=0:bb0c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bbed000 ph data[3]=0:bbed000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0bba6000 ph data[4]=0:bba6000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bb77000 ph data[5]=0:bb77000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bbf8000 ph data[6]=0:bbf8000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bb79000 ph data[7]=0:bb79000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bfaa000 ph data[8]=0:bfaa000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bb4b000 ph data[9]=0:bb4b000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bb14000 ph data[10]=0:bb14000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bbf5000 ph data[11]=0:bbf5000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bbee000 ph data[12]=0:bbee000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bb7f000 ph data[13]=0:bb7f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bc00000 set TERM ph data[14]=0:bc00000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0baaa000 ph data[0]=0:baaa000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb73000 ph data[1]=0:bb73000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0baac000 ph data[2]=0:baac000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb95000 ph data[3]=0:bb95000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb1e000 ph data[4]=0:bb1e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb9f000 ph data[5]=0:bb9f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bb78000 ph data[6]=0:bb78000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb49000 ph data[7]=0:bb49000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0baa2000 ph data[8]=0:baa2000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb6b000 ph data[9]=0:bb6b000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0baa4000 ph data[10]=0:baa4000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb8d000 ph data[11]=0:bb8d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb16000 ph data[12]=0:bb16000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb97000 ph data[13]=0:bb97000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb70000 ph data[14]=0:bb70000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb41000 set TERM ph data[15]=0:bb41000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:65f72000 ph data[0]=0:65f72000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bbd3000 ph data[1]=0:bbd3000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bb1c000 ph data[2]=0:bb1c000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bbfd000 ph data[3]=0:bbfd000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bda6000 ph data[4]=0:bda6000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bbc7000 ph data[5]=0:bbc7000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bc48000 ph data[6]=0:bc48000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:3f721000 ph data[7]=0:3f721000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:65f82000 ph data[8]=0:65f82000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3f70b000 ph data[9]=0:3f70b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bc3c000 ph data[10]=0:bc3c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bde5000 ph data[11]=0:bde5000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c036000 ph data[12]=0:c036000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bda7000 ph data[13]=0:bda7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bde8000 ph data[14]=0:bde8000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:38be9000 set TERM ph data[15]=0:38be9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe9dc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bbfa000 ph data[0]=0:bbfa000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bff3000 ph data[1]=0:bff3000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bbc4000 ph data[2]=0:bbc4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:38b35000 ph data[3]=0:38b35000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0c026000 ph data[4]=0:c026000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f767000 ph data[5]=0:3f767000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0c070000 ph data[6]=0:c070000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3f8c9000 ph data[7]=0:3f8c9000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bc12000 ph data[8]=0:bc12000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:38b03000 ph data[9]=0:38b03000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0c014000 ph data[10]=0:c014000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3890d000 ph data[11]=0:3890d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bc16000 ph data[12]=0:bc16000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bc27000 ph data[13]=0:bc27000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c060000 ph data[14]=0:c060000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bd91000 set TERM ph data[15]=0:bd91000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea44 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bfb2000 ph data[0]=0:bfb2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bbfb000 ph data[1]=0:bbfb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bb84000 ph data[2]=0:bb84000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bc25000 ph data[3]=0:bc25000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c08e000 ph data[4]=0:c08e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3f777000 ph data[5]=0:3f777000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c080000 ph data[6]=0:c080000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bc49000 ph data[7]=0:bc49000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bc1a000 ph data[8]=0:bc1a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bc0b000 ph data[9]=0:bc0b000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:3f7fc000 ph data[10]=0:3f7fc000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:38b25000 ph data[11]=0:38b25000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bc36000 ph data[12]=0:bc36000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bc3f000 ph data[13]=0:bc3f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bdb8000 ph data[14]=0:bdb8000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:3f719000 set TERM ph data[15]=0:3f719000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bada000 ph data[0]=0:bada000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb83000 ph data[1]=0:bb83000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0babc000 ph data[2]=0:babc000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb25000 ph data[3]=0:bb25000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb3e000 ph data[4]=0:bb3e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bbaf000 ph data[5]=0:bbaf000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bb88000 ph data[6]=0:bb88000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb59000 ph data[7]=0:bb59000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bab2000 ph data[8]=0:bab2000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb7b000 ph data[9]=0:bb7b000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bab4000 ph data[10]=0:bab4000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb9d000 ph data[11]=0:bb9d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb2e000 ph data[12]=0:bb2e000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bba7000 ph data[13]=0:bba7000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb80000 ph data[14]=0:bb80000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb51000 set TERM ph data[15]=0:bb51000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bc0a000 ph data[0]=0:bc0a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bddb000 ph data[1]=0:bddb000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bb94000 ph data[2]=0:bb94000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bbb5000 ph data[3]=0:bbb5000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bb26000 ph data[4]=0:bb26000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bdef000 ph data[5]=0:bdef000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0be30000 ph data[6]=0:be30000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bda9000 ph data[7]=0:bda9000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bc02000 ph data[8]=0:bc02000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bdd3000 ph data[9]=0:bdd3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bc04000 ph data[10]=0:bc04000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bbbd000 ph data[11]=0:bbbd000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bdee000 ph data[12]=0:bdee000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bde7000 ph data[13]=0:bde7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0be28000 ph data[14]=0:be28000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bda1000 set TERM ph data[15]=0:bda1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:2e58a000 ph data[0]=0:2e58a000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3f783000 ph data[1]=0:3f783000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bbbc000 ph data[2]=0:bbbc000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bc45000 ph data[3]=0:bc45000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bde6000 ph data[4]=0:bde6000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bddf000 ph data[5]=0:bddf000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0be20000 ph data[6]=0:be20000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bd99000 ph data[7]=0:bd99000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:2e59a000 ph data[8]=0:2e59a000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bc2b000 ph data[9]=0:bc2b000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bb74000 ph data[10]=0:bb74000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bc3d000 ph data[11]=0:bc3d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bdde000 ph data[12]=0:bdde000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0be07000 ph data[13]=0:be07000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bdd0000 ph data[14]=0:bdd0000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bf71000 set TERM ph data[15]=0:bf71000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea24 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:2e52a000 ph data[0]=0:2e52a000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bdeb000 ph data[1]=0:bdeb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bf9c000 ph data[2]=0:bf9c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bc35000 ph data[3]=0:bc35000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0bd8e000 ph data[4]=0:bd8e000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bdff000 ph data[5]=0:bdff000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0be48000 ph data[6]=0:be48000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bf79000 ph data[7]=0:bf79000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:3f81a000 ph data[8]=0:3f81a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bde3000 ph data[9]=0:bde3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bc1c000 ph data[10]=0:bc1c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bded000 ph data[11]=0:bded000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bc46000 ph data[12]=0:bc46000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bdf7000 ph data[13]=0:bdf7000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0be40000 ph data[14]=0:be40000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bf81000 set TERM ph data[15]=0:bf81000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea44 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba5a000 ph data[0]=0:ba5a000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bae3000 ph data[1]=0:bae3000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba1c000 ph data[2]=0:ba1c000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb0d000 ph data[3]=0:bb0d000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0ba96000 ph data[4]=0:ba96000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb0f000 ph data[5]=0:bb0f000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bae8000 ph data[6]=0:bae8000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bab9000 ph data[7]=0:bab9000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba12000 ph data[8]=0:ba12000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0badb000 ph data[9]=0:badb000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba14000 ph data[10]=0:ba14000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb05000 ph data[11]=0:bb05000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0ba8e000 ph data[12]=0:ba8e000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb07000 ph data[13]=0:bb07000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bae0000 ph data[14]=0:bae0000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bab1000 set TERM ph data[15]=0:bab1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba0a000 ph data[0]=0:ba0a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bad3000 ph data[1]=0:bad3000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba0c000 ph data[2]=0:ba0c000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bafd000 ph data[3]=0:bafd000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bb76000 ph data[4]=0:bb76000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb47000 ph data[5]=0:bb47000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bbc8000 ph data[6]=0:bbc8000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0baf1000 ph data[7]=0:baf1000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0baf2000 ph data[7]=0:baf1000 (1fff) get Phys(data[n=8+2000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb13000 ph data[8]=0:bb13000 (fff) get Phys(data[n=9+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bacc000 ph data[9]=0:bacc000 (fff) get Phys(data[n=10+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb35000 ph data[10]=0:bb35000 (fff) get Phys(data[n=11+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bb6e000 ph data[11]=0:bb6e000 (fff) get Phys(data[n=12+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bbbf000 ph data[12]=0:bbbf000 (fff) get Phys(data[n=13+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb98000 ph data[13]=0:bb98000 (fff) get Phys(data[n=14+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bb69000 set TERM ph data[14]=0:bb69000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bae2000 ph data[0]=0:bae2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bb8b000 ph data[1]=0:bb8b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bac4000 ph data[2]=0:bac4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb2d000 ph data[3]=0:bb2d000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bc3e000 ph data[4]=0:bc3e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bbb7000 ph data[5]=0:bbb7000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bb90000 ph data[6]=0:bb90000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bb61000 ph data[7]=0:bb61000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3f822000 ph data[8]=0:3f822000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0c03b000 ph data[9]=0:c03b000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bc14000 ph data[10]=0:bc14000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bd9d000 ph data[11]=0:bd9d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c096000 ph data[12]=0:c096000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0be0f000 ph data[13]=0:be0f000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c1c8000 ph data[14]=0:c1c8000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:38bd9000 set TERM ph data[15]=0:38bd9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:389f2000 ph data[0]=0:389f2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bf93000 ph data[1]=0:bf93000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bc0c000 ph data[2]=0:bc0c000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bd95000 ph data[3]=0:bd95000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:40206000 ph data[4]=0:40206000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0c067000 ph data[5]=0:c067000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:28810000 ph data[6]=0:28810000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:38be1000 ph data[7]=0:38be1000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:3f812000 ph data[8]=0:3f812000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bf9b000 ph data[9]=0:bf9b000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0c0a4000 ph data[10]=0:c0a4000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bd8d000 ph data[11]=0:bd8d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c09e000 ph data[12]=0:c09e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0c05f000 ph data[13]=0:c05f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:28808000 set TERM ph data[14]=0:28808000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bbc2000 ph data[0]=0:bbc2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0be53000 ph data[1]=0:be53000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bbfc000 ph data[2]=0:bbfc000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0be7d000 ph data[3]=0:be7d000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0be6e000 ph data[4]=0:be6e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0be6f000 ph data[4]=0:be6e000 (1fff) get Phys(data[n=5+2000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0beb0000 ph data[5]=0:beb0000 (fff) get Phys(data[n=6+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bc41000 ph data[6]=0:bc41000 (fff) get Phys(data[n=7+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bbd2000 ph data[7]=0:bbd2000 (fff) get Phys(data[n=8+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bfa3000 ph data[8]=0:bfa3000 (fff) get Phys(data[n=9+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:269ec000 ph data[9]=0:269ec000 (fff) get Phys(data[n=10+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0c05d000 ph data[10]=0:c05d000 (fff) get Phys(data[n=11+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0ba9e000 ph data[11]=0:ba9e000 (fff) get Phys(data[n=12+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb17000 ph data[12]=0:bb17000 (fff) get Phys(data[n=13+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0baf0000 ph data[13]=0:baf0000 (fff) get Phys(data[n=14+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bac1000 set TERM ph data[14]=0:bac1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0c05a000 ph data[0]=0:c05a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bfab000 ph data[1]=0:bfab000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:269f4000 ph data[2]=0:269f4000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bfbd000 ph data[3]=0:bfbd000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:1227e000 ph data[4]=0:1227e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bfaf000 ph data[5]=0:bfaf000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:28800000 ph data[6]=0:28800000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:38bd1000 ph data[7]=0:38bd1000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bf8a000 ph data[8]=0:bf8a000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3892b000 ph data[9]=0:3892b000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:269fc000 ph data[10]=0:269fc000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bfc5000 ph data[11]=0:bfc5000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:287f6000 ph data[12]=0:287f6000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bfb7000 ph data[13]=0:bfb7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:2e560000 ph data[14]=0:2e560000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bf49000 set TERM ph data[15]=0:bf49000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe9dc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bf92000 ph data[0]=0:bf92000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:38b4b000 ph data[1]=0:38b4b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:12274000 ph data[2]=0:12274000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bfcd000 ph data[3]=0:bfcd000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:2e56e000 ph data[4]=0:2e56e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bfbf000 ph data[5]=0:bfbf000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:64248000 ph data[6]=0:64248000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bf39000 ph data[7]=0:bf39000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bffa000 ph data[8]=0:bffa000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:38923000 ph data[9]=0:38923000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bfbc000 ph data[10]=0:bfbc000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0c065000 ph data[11]=0:c065000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:10b46000 ph data[12]=0:10b46000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bfc7000 ph data[13]=0:bfc7000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:64240000 ph data[14]=0:64240000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3f889000 set TERM ph data[15]=0:3f889000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea44 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bf9a000 ph data[0]=0:bf9a000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bfeb000 ph data[1]=0:bfeb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bfb4000 ph data[2]=0:bfb4000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3f805000 ph data[3]=0:3f805000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c0c6000 ph data[4]=0:c0c6000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0c007000 ph data[5]=0:c007000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c110000 ph data[6]=0:c110000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:3f881000 ph data[7]=0:3f881000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bf82000 ph data[8]=0:bf82000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:3f8b3000 ph data[9]=0:3f8b3000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0c01c000 ph data[10]=0:c01c000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f7fd000 ph data[11]=0:3f7fd000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c0d6000 ph data[12]=0:c0d6000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0c017000 ph data[13]=0:c017000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0c090000 ph data[14]=0:c090000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:3f879000 set TERM ph data[15]=0:3f879000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bba2000 ph data[0]=0:bba2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0be3b000 ph data[1]=0:be3b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bbe4000 ph data[2]=0:bbe4000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0be6d000 ph data[3]=0:be6d000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0be5e000 ph data[4]=0:be5e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0be17000 ph data[5]=0:be17000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bea0000 ph data[6]=0:bea0000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bc31000 ph data[7]=0:bc31000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bbba000 ph data[8]=0:bbba000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0be4b000 ph data[9]=0:be4b000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bbec000 ph data[10]=0:bbec000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0be75000 ph data[11]=0:be75000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0be66000 ph data[12]=0:be66000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0be1f000 ph data[13]=0:be1f000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bea8000 ph data[14]=0:bea8000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bc39000 set TERM ph data[15]=0:bc39000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0c002000 ph data[0]=0:c002000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3f8ab000 ph data[1]=0:3f8ab000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bfc4000 ph data[2]=0:bfc4000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:3f7ed000 ph data[3]=0:3f7ed000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3fe26000 ph data[4]=0:3fe26000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:38aef000 ph data[5]=0:38aef000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:64230000 ph data[6]=0:64230000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bf31000 ph data[7]=0:bf31000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bff2000 ph data[8]=0:bff2000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3f8a3000 ph data[9]=0:3f8a3000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0c03c000 ph data[10]=0:c03c000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3f7f5000 ph data[11]=0:3f7f5000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c006000 ph data[12]=0:c006000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bf87000 ph data[13]=0:bf87000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c0c8000 ph data[14]=0:c0c8000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bf29000 set TERM ph data[15]=0:bf29000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bfea000 ph data[0]=0:bfea000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3f8bb000 ph data[1]=0:3f8bb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bff4000 ph data[2]=0:bff4000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bf85000 ph data[3]=0:bf85000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0c00e000 ph data[4]=0:c00e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f707000 ph data[5]=0:3f707000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0c0d0000 ph data[6]=0:c0d0000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bf21000 ph data[7]=0:bf21000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bfe2000 ph data[8]=0:bfe2000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bf63000 ph data[9]=0:bf63000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bffc000 ph data[10]=0:bffc000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bf95000 ph data[11]=0:bf95000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c016000 ph data[12]=0:c016000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3f787000 ph data[13]=0:3f787000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c0d8000 ph data[14]=0:c0d8000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bf19000 set TERM ph data[15]=0:bf19000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea44 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb70 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bfda000 ph data[0]=0:bfda000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bf5b000 ph data[1]=0:bf5b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0c004000 ph data[2]=0:c004000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3f755000 ph data[3]=0:3f755000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c086000 ph data[4]=0:c086000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bf6f000 ph data[5]=0:bf6f000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c058000 ph data[6]=0:c058000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bf11000 ph data[7]=0:bf11000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bfd2000 ph data[8]=0:bfd2000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bf53000 ph data[9]=0:bf53000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bfe4000 ph data[10]=0:bfe4000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f74d000 ph data[11]=0:3f74d000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c07e000 ph data[12]=0:c07e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:3f77f000 ph data[13]=0:3f77f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0c0c0000 ph data[14]=0:c0c0000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bf09000 set TERM ph data[15]=0:bf09000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea44 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bdc2000 ph data[0]=0:bdc2000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb2b000 ph data[1]=0:bb2b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bafc000 ph data[2]=0:bafc000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb55000 ph data[3]=0:bb55000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb8e000 ph data[4]=0:bb8e000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb57000 ph data[5]=0:bb57000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bbd8000 ph data[6]=0:bbd8000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb11000 ph data[7]=0:bb11000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bdba000 ph data[8]=0:bdba000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb33000 ph data[9]=0:bb33000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba94000 ph data[10]=0:ba94000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb7d000 ph data[11]=0:bb7d000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb96000 ph data[12]=0:bb96000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb67000 ph data[13]=0:bb67000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bbe8000 ph data[14]=0:bbe8000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0be31000 set TERM ph data[15]=0:be31000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba8a000 ph data[0]=0:ba8a000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bb5b000 ph data[1]=0:bb5b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba9c000 ph data[2]=0:ba9c000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb85000 ph data[3]=0:bb85000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bb0e000 ph data[4]=0:bb0e000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb8f000 ph data[5]=0:bb8f000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb68000 ph data[6]=0:bb68000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bb39000 ph data[7]=0:bb39000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0ba92000 ph data[8]=0:ba92000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb63000 ph data[9]=0:bb63000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bbf4000 ph data[10]=0:bbf4000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0be5d000 ph data[11]=0:be5d000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0be46000 ph data[12]=0:be46000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bdc7000 ph data[13]=0:bdc7000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0be08000 ph data[14]=0:be08000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bc19000 set TERM ph data[15]=0:bc19000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bbaa000 ph data[0]=0:bbaa000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bda3000 ph data[1]=0:bda3000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bbdc000 ph data[2]=0:bbdc000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0be65000 ph data[3]=0:be65000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0be4e000 ph data[4]=0:be4e000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bdcf000 ph data[5]=0:bdcf000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0be98000 ph data[6]=0:be98000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bc21000 ph data[7]=0:bc21000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bfca000 ph data[8]=0:bfca000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bdab000 ph data[9]=0:bdab000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bfdc000 ph data[10]=0:bfdc000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f82d000 ph data[11]=0:3f82d000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c076000 ph data[12]=0:c076000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bf7f000 ph data[13]=0:bf7f000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c0b8000 ph data[14]=0:c0b8000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bf01000 set TERM ph data[15]=0:bf01000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef90 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bfc2000 ph data[0]=0:bfc2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bf43000 ph data[1]=0:bf43000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bfd4000 ph data[2]=0:bfd4000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3f75d000 ph data[3]=0:3f75d000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c066000 ph data[4]=0:c066000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bf77000 ph data[5]=0:bf77000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c0b0000 ph data[6]=0:c0b0000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bef9000 ph data[7]=0:bef9000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bf7a000 ph data[8]=0:bf7a000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bf3b000 ph data[9]=0:bf3b000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bfec000 ph data[10]=0:bfec000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f765000 ph data[11]=0:3f765000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c05e000 ph data[12]=0:c05e000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bf5f000 ph data[13]=0:bf5f000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0c0a0000 set TERM ph data[14]=0:c0a0000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbee60 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:38b4a000 ph data[0]=0:38b4a000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bf13000 set TERM ph data[1]=0:bf13000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bb5a000 ph data[0]=0:bb5a000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bd9b000 set TERM ph data[1]=0:bd9b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960e460, OrigWordsRequested 0x3700, DevSize 0x37 IdeReadWrite (REQ): Starting sector is 3960e460, Number of WORDS 0x3700, DevSize 0x37 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b52000, count 6e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:0ba8a000 ph data[0]=0:ba8a000 (fff) get Phys(data[n=1+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:0bb5b000 ph data[1]=0:bb5b000 (fff) get Phys(data[n=2+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:0ba9c000 ph data[2]=0:ba9c000 (fff) get Phys(data[n=3+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:0be5d000 ph data[3]=0:be5d000 (fff) get Phys(data[n=4+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:0bb0e000 ph data[4]=0:bb0e000 (fff) get Phys(data[n=5+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:0bb67000 ph data[5]=0:bb67000 (fff) get Phys(data[n=6+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:0bbe8000 set TERM ph data[6]=0:bbe8000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960e460, Count 0x37(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x7, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf174 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac360, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac360, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0c05a000 ph data[0]=0:c05a000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bfab000 set TERM ph data[1]=0:bfab000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3700, WordsLeft 3700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 6e00, full size 6e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac360, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bab2000 ph data[0]=0:bab2000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bddb000 set TERM ph data[1]=0:bddb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bff2000 ph data[0]=0:bff2000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f8a3000 set TERM ph data[1]=0:3f8a3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e87b0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 395e87b0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bc02000 set TERM ph data[0]=0:bc02000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e87b0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DBAC0, B64BD778, B5DFB618, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \RECYCLED\INFO2, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \RECYCLED, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:561) NTFS write-support is EXPERIMENTAL and is disabled by default! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bb5a000 ph data[0]=0:bb5a000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bd9b000 set TERM ph data[1]=0:bd9b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f812000 ph data[0]=0:3f812000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bb83000 set TERM ph data[1]=0:bb83000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e87b0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 395e87b0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:3f822000 set TERM ph data[0]=0:3f822000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e87b0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DBAC0, B64BD778, B5DFB618, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \RECYCLED\INFO2, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \RECYCLED, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:561) NTFS write-support is EXPERIMENTAL and is disabled by default! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0ba0c000 ph data[0]=0:ba0c000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bb35000 set TERM ph data[1]=0:bb35000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bae0000 ph data[0]=0:bae0000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bab9000 set TERM ph data[1]=0:bab9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DBAC0, B64BD778, B5DFB618, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DBAC0, B64BD778, B5E2B2E0, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DBAC0, B64BD778, B5E2B2E0, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5E1F028, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DA008, B64BC778, B5DFB618, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DA008, B64BC778, B5E2B2E0, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5E1F028, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BC830, B61DA008, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 71300a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 71300a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5a608 set TERM ph data[0]=0:8d5a608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x71300a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 113120, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 113120, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x113120, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DA008, B64BC778, B5E2B2E0, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5E1F028, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BC830, B61DA008, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 71300a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 71300a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5a608 set TERM ph data[0]=0:8d5a608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x71300a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 113120, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 113120, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x113120, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051040, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051040) AtapiVirtToPhysAddr_: f7051040 -> 00000000:085b0040 set TERM ph data[0]=0:85b0040 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051040, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051040) AtapiVirtToPhysAddr_: f7051040 -> 00000000:085b0040 set TERM ph data[0]=0:85b0040 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051040, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051040) AtapiVirtToPhysAddr_: f7051040 -> 00000000:085b0040 set TERM ph data[0]=0:85b0040 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051040, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051040) AtapiVirtToPhysAddr_: f7051040 -> 00000000:085b0040 set TERM ph data[0]=0:85b0040 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051040, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051040) AtapiVirtToPhysAddr_: f7051040 -> 00000000:085b0040 set TERM ph data[0]=0:85b0040 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051040, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051040) AtapiVirtToPhysAddr_: f7051040 -> 00000000:085b0040 set TERM ph data[0]=0:85b0040 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38feff70, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38feff70, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bacc000 ph data[0]=0:bacc000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bd9d000 ph data[1]=0:bd9d000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bc3e000 ph data[2]=0:bc3e000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bbb7000 ph data[3]=0:bbb7000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb98000 ph data[4]=0:bb98000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb69000 ph data[5]=0:bb69000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bae2000 ph data[6]=0:bae2000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb8b000 ph data[7]=0:bb8b000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bc0c000 ph data[8]=0:bc0c000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb2d000 ph data[9]=0:bb2d000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bb6e000 ph data[10]=0:bb6e000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bbbf000 ph data[11]=0:bbbf000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb90000 ph data[12]=0:bb90000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0baf1000 ph data[13]=0:baf1000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0baf2000 ph data[13]=0:baf1000 (1fff) get Phys(data[n=14+2000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb13000 set TERM ph data[14]=0:bb13000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38feff70, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fefff0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fefff0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0c0a4000 ph data[0]=0:c0a4000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bd8d000 ph data[1]=0:bd8d000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:40206000 ph data[2]=0:40206000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb47000 ph data[3]=0:bb47000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bbc8000 ph data[4]=0:bbc8000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bab1000 ph data[5]=0:bab1000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0ba0a000 ph data[6]=0:ba0a000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bf93000 ph data[7]=0:bf93000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bb74000 ph data[8]=0:bb74000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb25000 ph data[9]=0:bb25000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0c09e000 ph data[10]=0:c09e000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0be0f000 ph data[11]=0:be0f000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c1c8000 ph data[12]=0:c1c8000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb61000 ph data[13]=0:bb61000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3f822000 ph data[14]=0:3f822000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bf9b000 set TERM ph data[15]=0:bf9b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff0070, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff0070, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bbbc000 ph data[0]=0:bbbc000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bc35000 ph data[1]=0:bc35000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bdde000 ph data[2]=0:bdde000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0c067000 ph data[3]=0:c067000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:28810000 ph data[4]=0:28810000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:38bd9000 ph data[5]=0:38bd9000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:389f2000 ph data[6]=0:389f2000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bc2b000 ph data[7]=0:bc2b000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bc04000 ph data[8]=0:bc04000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bc3d000 ph data[9]=0:bc3d000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bde6000 ph data[10]=0:bde6000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bddf000 ph data[11]=0:bddf000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0be20000 ph data[12]=0:be20000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:38be1000 ph data[13]=0:38be1000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:2e59a000 ph data[14]=0:2e59a000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3f783000 set TERM ph data[15]=0:3f783000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff00f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff00f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0ba0c000 ph data[0]=0:ba0c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bc45000 ph data[1]=0:bc45000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bdee000 ph data[2]=0:bdee000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bde7000 ph data[3]=0:bde7000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0be28000 ph data[4]=0:be28000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bda1000 ph data[5]=0:bda1000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:2e58a000 ph data[6]=0:2e58a000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bdd3000 ph data[7]=0:bdd3000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bab4000 ph data[8]=0:bab4000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bb35000 ph data[9]=0:bb35000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bb76000 ph data[10]=0:bb76000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bdef000 ph data[11]=0:bdef000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0be30000 ph data[12]=0:be30000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bda9000 ph data[13]=0:bda9000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bc02000 ph data[14]=0:bc02000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bb7b000 set TERM ph data[15]=0:bb7b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fefff0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff0070, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff00f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0c0c8000 ph data[0]=0:c0c8000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bf31000 ph data[1]=0:bf31000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bff2000 ph data[2]=0:bff2000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:3f8a3000 ph data[3]=0:3f8a3000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0babc000 ph data[4]=0:babc000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb9d000 ph data[5]=0:bb9d000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0ba96000 ph data[6]=0:ba96000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bf87000 ph data[7]=0:bf87000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0c0d0000 ph data[8]=0:c0d0000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bf29000 ph data[9]=0:bf29000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bfea000 ph data[10]=0:bfea000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:3f8bb000 ph data[11]=0:3f8bb000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0c03c000 ph data[12]=0:c03c000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bf85000 ph data[13]=0:bf85000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0c006000 ph data[14]=0:c006000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3f707000 set TERM ph data[15]=0:3f707000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0c0d8000 ph data[0]=0:c0d8000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bf21000 ph data[1]=0:bf21000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bfe2000 ph data[2]=0:bfe2000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bf63000 ph data[3]=0:bf63000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bff4000 ph data[4]=0:bff4000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bf95000 ph data[5]=0:bf95000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0c00e000 ph data[6]=0:c00e000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:3f787000 ph data[7]=0:3f787000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0c058000 ph data[8]=0:c058000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bf19000 ph data[9]=0:bf19000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bfda000 ph data[10]=0:bfda000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bf5b000 ph data[11]=0:bf5b000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bffc000 ph data[12]=0:bffc000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3f755000 ph data[13]=0:3f755000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c016000 ph data[14]=0:c016000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bf6f000 set TERM ph data[15]=0:bf6f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0c0c0000 ph data[0]=0:c0c0000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bf11000 ph data[1]=0:bf11000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bfd2000 ph data[2]=0:bfd2000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bf53000 ph data[3]=0:bf53000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0c004000 ph data[4]=0:c004000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f74d000 ph data[5]=0:3f74d000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0c086000 ph data[6]=0:c086000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3f77f000 ph data[7]=0:3f77f000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:38ad8000 ph data[8]=0:38ad8000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bf09000 ph data[9]=0:bf09000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:38b3a000 ph data[10]=0:38b3a000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bf23000 ph data[11]=0:bf23000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bfe4000 ph data[12]=0:bfe4000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3f77d000 ph data[13]=0:3f77d000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c07e000 ph data[14]=0:c07e000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bf4f000 set TERM ph data[15]=0:bf4f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bc00000 ph data[0]=0:bc00000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afdd9000 ph data[1]=0:afdd9000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:38b42000 ph data[2]=0:38b42000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bf1b000 ph data[3]=0:bf1b000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:38a4c000 ph data[4]=0:38a4c000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bf65000 ph data[5]=0:bf65000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c046000 ph data[6]=0:c046000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bb7f000 ph data[7]=0:bb7f000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bbf8000 ph data[8]=0:bbf8000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bb79000 ph data[9]=0:bb79000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bb5a000 ph data[10]=0:bb5a000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bd9b000 ph data[11]=0:bd9b000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:38a54000 ph data[12]=0:38a54000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bbed000 ph data[13]=0:bbed000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bbee000 ph data[13]=0:bbed000 (1fff) get Phys(data[n=14+2000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bb77000 set TERM ph data[14]=0:bb77000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa880 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960e660, OrigWordsRequested 0x1100, DevSize 0x11 IdeReadWrite (REQ): Starting sector is 3960e660, Number of WORDS 0x1100, DevSize 0x11 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6f9c000, count 2200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6f9c000) AtapiVirtToPhysAddr_: f6f9c000 -> 00000000:28808000 ph data[0]=0:28808000 (fff) get Phys(data[n=1+1000]=f6f9d000) AtapiVirtToPhysAddr_: f6f9d000 -> 00000000:38bc1000 ph data[1]=0:38bc1000 (fff) get Phys(data[n=2+1000]=f6f9e000) AtapiVirtToPhysAddr_: f6f9e000 -> 00000000:0bada000 set TERM ph data[2]=0:bada000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960e660, Count 0x11(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x3, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bb70000 ph data[0]=0:bb70000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb49000 ph data[1]=0:bb49000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0baaa000 ph data[2]=0:baaa000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bd93000 ph data[3]=0:bd93000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:269f4000 ph data[4]=0:269f4000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bfc5000 ph data[5]=0:bfc5000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:1227e000 ph data[6]=0:1227e000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bba7000 ph data[7]=0:bba7000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bb78000 ph data[8]=0:bb78000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb21000 ph data[9]=0:bb21000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bb12000 ph data[10]=0:bb12000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bc43000 ph data[11]=0:bc43000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0baa4000 ph data[12]=0:baa4000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bbfd000 ph data[13]=0:bbfd000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb3e000 ph data[14]=0:bb3e000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb97000 set TERM ph data[15]=0:bb97000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bdf8000 ph data[0]=0:bdf8000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bdc1000 ph data[1]=0:bdc1000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bbb2000 ph data[2]=0:bbb2000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bc33000 ph data[3]=0:bc33000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0baac000 ph data[4]=0:baac000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb8d000 ph data[5]=0:bb8d000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb1e000 ph data[6]=0:bb1e000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bb9f000 ph data[7]=0:bb9f000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bbf0000 ph data[8]=0:bbf0000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bdb9000 ph data[9]=0:bdb9000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bbca000 ph data[10]=0:bbca000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0baeb000 ph data[11]=0:baeb000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bc2c000 ph data[12]=0:bc2c000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb95000 ph data[13]=0:bb95000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bdae000 ph data[14]=0:bdae000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bdb7000 set TERM ph data[15]=0:bdb7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0be00000 ph data[0]=0:be00000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bc11000 ph data[1]=0:bc11000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0ba62000 ph data[2]=0:ba62000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0baf3000 ph data[3]=0:baf3000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bbcc000 ph data[4]=0:bbcc000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bdad000 ph data[5]=0:bdad000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bb9e000 ph data[6]=0:bb9e000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bb6f000 ph data[7]=0:bb6f000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0baf8000 ph data[8]=0:baf8000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bac9000 ph data[9]=0:bac9000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0ba6a000 ph data[10]=0:ba6a000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bafb000 ph data[11]=0:bafb000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bbd4000 ph data[12]=0:bbd4000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bda5000 ph data[13]=0:bda5000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0be3e000 ph data[14]=0:be3e000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bdbf000 set TERM ph data[15]=0:bdbf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bb40000 ph data[0]=0:bb40000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bad1000 ph data[1]=0:bad1000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0ba72000 ph data[2]=0:ba72000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bb03000 ph data[3]=0:bb03000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0ba24000 ph data[4]=0:ba24000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0be55000 ph data[5]=0:be55000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bae6000 ph data[6]=0:bae6000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bb1f000 ph data[7]=0:bb1f000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bb48000 ph data[8]=0:bb48000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bad9000 ph data[9]=0:bad9000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0ba7a000 ph data[10]=0:ba7a000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bb0b000 ph data[11]=0:bb0b000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0ba2c000 ph data[12]=0:ba2c000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bb15000 ph data[13]=0:bb15000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0baee000 ph data[14]=0:baee000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bb27000 set TERM ph data[15]=0:bb27000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1100, WordsLeft 1100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2200, full size 2200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665630 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665630 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df9b70 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df9b70, CDB 0xb5df9ba0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df9b70 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df9b70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df9b70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bbf8000 ph data[0]=0:bbf8000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb79000 ph data[1]=0:bb79000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bb5a000 ph data[2]=0:bb5a000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bd9b000 ph data[3]=0:bd9b000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:38a54000 ph data[4]=0:38a54000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bbed000 ph data[5]=0:bbed000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bbee000 ph data[5]=0:bbed000 (1fff) get Phys(data[n=6+2000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb77000 ph data[6]=0:bb77000 (fff) get Phys(data[n=7+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bc00000 ph data[7]=0:bc00000 (fff) get Phys(data[n=8+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:afdd9000 ph data[8]=0:afdd9000 (fff) get Phys(data[n=9+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:38b42000 ph data[9]=0:38b42000 (fff) get Phys(data[n=10+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bf1b000 ph data[10]=0:bf1b000 (fff) get Phys(data[n=11+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:38a4c000 ph data[11]=0:38a4c000 (fff) get Phys(data[n=12+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bf65000 ph data[12]=0:bf65000 (fff) get Phys(data[n=13+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0c046000 ph data[13]=0:c046000 (fff) get Phys(data[n=14+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb7f000 set TERM ph data[14]=0:bb7f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:38ad8000 ph data[0]=0:38ad8000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bf09000 ph data[1]=0:bf09000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:38b3a000 ph data[2]=0:38b3a000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bf23000 ph data[3]=0:bf23000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bfe4000 ph data[4]=0:bfe4000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3f77d000 ph data[5]=0:3f77d000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0c07e000 ph data[6]=0:c07e000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bf4f000 ph data[7]=0:bf4f000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0c0c0000 ph data[8]=0:c0c0000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bf11000 ph data[9]=0:bf11000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bfd2000 ph data[10]=0:bfd2000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bf53000 ph data[11]=0:bf53000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c004000 ph data[12]=0:c004000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3f74d000 ph data[13]=0:3f74d000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c086000 ph data[14]=0:c086000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3f77f000 set TERM ph data[15]=0:3f77f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0c058000 ph data[0]=0:c058000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bf19000 ph data[1]=0:bf19000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bfda000 ph data[2]=0:bfda000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bf5b000 ph data[3]=0:bf5b000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bffc000 ph data[4]=0:bffc000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f755000 ph data[5]=0:3f755000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0c016000 ph data[6]=0:c016000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bf6f000 ph data[7]=0:bf6f000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0c0d8000 ph data[8]=0:c0d8000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bf21000 ph data[9]=0:bf21000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bfe2000 ph data[10]=0:bfe2000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bf63000 ph data[11]=0:bf63000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bff4000 ph data[12]=0:bff4000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bf95000 ph data[13]=0:bf95000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c00e000 ph data[14]=0:c00e000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3f787000 set TERM ph data[15]=0:3f787000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0c0d0000 ph data[0]=0:c0d0000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bf29000 ph data[1]=0:bf29000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bfea000 ph data[2]=0:bfea000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3f8bb000 ph data[3]=0:3f8bb000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c03c000 ph data[4]=0:c03c000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bf85000 ph data[5]=0:bf85000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c006000 ph data[6]=0:c006000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:3f707000 ph data[7]=0:3f707000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0c0c8000 ph data[8]=0:c0c8000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bf31000 ph data[9]=0:bf31000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bff2000 ph data[10]=0:bff2000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f8a3000 ph data[11]=0:3f8a3000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0babc000 ph data[12]=0:babc000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bb9d000 ph data[13]=0:bb9d000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0ba96000 set TERM ph data[14]=0:ba96000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bb50000 ph data[0]=0:bb50000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bae1000 ph data[1]=0:bae1000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba82000 ph data[2]=0:ba82000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb4b000 ph data[3]=0:bb4b000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0ba34000 ph data[4]=0:ba34000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb1d000 ph data[5]=0:bb1d000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0baf6000 ph data[6]=0:baf6000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb2f000 ph data[7]=0:bb2f000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bb58000 ph data[8]=0:bb58000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bc09000 ph data[9]=0:bc09000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bfaa000 ph data[10]=0:bfaa000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bb43000 ph data[11]=0:bb43000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0ba3c000 ph data[12]=0:ba3c000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bb65000 ph data[13]=0:bb65000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bafe000 ph data[14]=0:bafe000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb37000 set TERM ph data[15]=0:bb37000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bdf0000 ph data[0]=0:bdf0000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:afe19000 ph data[1]=0:afe19000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bb62000 ph data[2]=0:bb62000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:afdeb000 ph data[3]=0:afdeb000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0ba84000 ph data[4]=0:ba84000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb6d000 ph data[5]=0:bb6d000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb06000 ph data[6]=0:bb06000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bb3f000 ph data[7]=0:bb3f000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3f7d8000 ph data[8]=0:3f7d8000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0b969000 ph data[9]=0:b969000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3f762000 ph data[10]=0:3f762000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:afde3000 ph data[11]=0:afde3000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bb14000 ph data[12]=0:bb14000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb75000 ph data[13]=0:bb75000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3f72e000 ph data[14]=0:3f72e000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afe1f000 set TERM ph data[15]=0:afe1f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3f7e0000 ph data[0]=0:3f7e0000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afe11000 ph data[1]=0:afe11000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3f76a000 ph data[2]=0:3f76a000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:afddb000 ph data[3]=0:afddb000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bb0c000 ph data[4]=0:bb0c000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bbf5000 ph data[5]=0:bbf5000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:3f7de000 ph data[6]=0:3f7de000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:afe17000 ph data[7]=0:afe17000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3f7e8000 ph data[8]=0:3f7e8000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afe09000 ph data[9]=0:afe09000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bf72000 ph data[10]=0:bf72000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afe4b000 ph data[11]=0:afe4b000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3f794000 ph data[12]=0:3f794000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bf1d000 ph data[13]=0:bf1d000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3f7e6000 ph data[14]=0:3f7e6000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:afc77000 set TERM ph data[15]=0:afc77000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3f7f0000 ph data[0]=0:3f7f0000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afe01000 ph data[1]=0:afe01000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bf62000 ph data[2]=0:bf62000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afe43000 ph data[3]=0:afe43000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3f73c000 ph data[4]=0:3f73c000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bf0d000 ph data[5]=0:bf0d000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3f726000 ph data[6]=0:3f726000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:afc6f000 ph data[7]=0:afc6f000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:3f728000 ph data[8]=0:3f728000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b961000 ph data[9]=0:b961000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bf5a000 ph data[10]=0:bf5a000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:afe3b000 ph data[11]=0:afe3b000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3f79c000 ph data[12]=0:3f79c000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:afe35000 ph data[13]=0:afe35000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3f836000 ph data[14]=0:3f836000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:afc67000 set TERM ph data[15]=0:afc67000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0c0c8000 ph data[0]=0:c0c8000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bf29000 ph data[1]=0:bf29000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bfea000 ph data[2]=0:bfea000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:3f8bb000 ph data[3]=0:3f8bb000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0c03c000 ph data[4]=0:c03c000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bf85000 ph data[5]=0:bf85000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0c006000 ph data[6]=0:c006000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:3f707000 ph data[7]=0:3f707000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0c0d0000 ph data[8]=0:c0d0000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bf21000 ph data[9]=0:bf21000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bfe2000 ph data[10]=0:bfe2000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bf63000 ph data[11]=0:bf63000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bff4000 ph data[12]=0:bff4000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bf95000 ph data[13]=0:bf95000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0c00e000 ph data[14]=0:c00e000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3f787000 set TERM ph data[15]=0:3f787000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0c0d8000 ph data[0]=0:c0d8000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bf19000 ph data[1]=0:bf19000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bfda000 ph data[2]=0:bfda000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bf5b000 ph data[3]=0:bf5b000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bffc000 ph data[4]=0:bffc000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3f755000 ph data[5]=0:3f755000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0c016000 ph data[6]=0:c016000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bf6f000 ph data[7]=0:bf6f000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0c058000 ph data[8]=0:c058000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bf11000 ph data[9]=0:bf11000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bfd2000 ph data[10]=0:bfd2000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bf53000 ph data[11]=0:bf53000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c004000 ph data[12]=0:c004000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3f74d000 ph data[13]=0:3f74d000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c086000 ph data[14]=0:c086000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3f77f000 set TERM ph data[15]=0:3f77f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0c0c0000 ph data[0]=0:c0c0000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bf09000 ph data[1]=0:bf09000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:38b3a000 ph data[2]=0:38b3a000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bf23000 ph data[3]=0:bf23000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bfe4000 ph data[4]=0:bfe4000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3f77d000 ph data[5]=0:3f77d000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0c07e000 ph data[6]=0:c07e000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bf4f000 ph data[7]=0:bf4f000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:38ad8000 ph data[8]=0:38ad8000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afdd9000 ph data[9]=0:afdd9000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:38b42000 ph data[10]=0:38b42000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bf1b000 ph data[11]=0:bf1b000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:38a4c000 ph data[12]=0:38a4c000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bf65000 ph data[13]=0:bf65000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c046000 ph data[14]=0:c046000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bb7f000 set TERM ph data[15]=0:bb7f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bc00000 ph data[0]=0:bc00000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bb79000 ph data[1]=0:bb79000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bb5a000 ph data[2]=0:bb5a000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bd9b000 ph data[3]=0:bd9b000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:38a54000 ph data[4]=0:38a54000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bbed000 ph data[5]=0:bbed000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bbee000 ph data[5]=0:bbed000 (1fff) get Phys(data[n=6+2000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bb77000 ph data[6]=0:bb77000 (fff) get Phys(data[n=7+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bbf8000 ph data[7]=0:bbf8000 (fff) get Phys(data[n=8+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b959000 ph data[8]=0:b959000 (fff) get Phys(data[n=9+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bf52000 ph data[9]=0:bf52000 (fff) get Phys(data[n=10+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:afe33000 ph data[10]=0:afe33000 (fff) get Phys(data[n=11+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3f824000 ph data[11]=0:3f824000 (fff) get Phys(data[n=12+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:afe25000 ph data[12]=0:afe25000 (fff) get Phys(data[n=13+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3f83e000 set TERM ph data[13]=0:3f83e000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf4c4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xe, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:269f4000 ph data[0]=0:269f4000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bfc5000 ph data[1]=0:bfc5000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:1227e000 ph data[2]=0:1227e000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bba7000 ph data[3]=0:bba7000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb70000 ph data[4]=0:bb70000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb49000 ph data[5]=0:bb49000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0baaa000 ph data[6]=0:baaa000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bd93000 ph data[7]=0:bd93000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0babc000 ph data[8]=0:babc000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb9d000 ph data[9]=0:bb9d000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba96000 ph data[10]=0:ba96000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bf87000 ph data[11]=0:bf87000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f730000 ph data[12]=0:3f730000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bf31000 ph data[13]=0:bf31000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bff2000 ph data[14]=0:bff2000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3f8a3000 set TERM ph data[15]=0:3f8a3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3f82c000 ph data[0]=0:3f82c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:afe1d000 ph data[1]=0:afe1d000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3f846000 ph data[2]=0:3f846000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:afc57000 ph data[3]=0:afc57000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0c048000 ph data[4]=0:c048000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b951000 ph data[5]=0:b951000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bf6a000 ph data[6]=0:bf6a000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:afe2b000 ph data[7]=0:afe2b000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bf7c000 ph data[8]=0:bf7c000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:afe15000 ph data[9]=0:afe15000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bfe6000 ph data[10]=0:bfe6000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:afc4f000 ph data[11]=0:afc4f000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c040000 ph data[12]=0:c040000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b949000 ph data[13]=0:b949000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bf4a000 ph data[14]=0:bf4a000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afe23000 set TERM ph data[15]=0:afe23000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bf74000 ph data[0]=0:bf74000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afe0d000 ph data[1]=0:afe0d000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3f84e000 ph data[2]=0:3f84e000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:afc47000 ph data[3]=0:afc47000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0c038000 ph data[4]=0:c038000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0b941000 ph data[5]=0:b941000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bf42000 ph data[6]=0:bf42000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0b973000 ph data[7]=0:b973000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bf6c000 ph data[8]=0:bf6c000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afe05000 ph data[9]=0:afe05000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bff6000 ph data[10]=0:bff6000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0b9b7000 ph data[11]=0:b9b7000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c030000 ph data[12]=0:c030000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0b939000 ph data[13]=0:b939000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bf3a000 ph data[14]=0:bf3a000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:afe1b000 set TERM ph data[15]=0:afe1b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bf84000 ph data[0]=0:bf84000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afdfd000 ph data[1]=0:afdfd000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bfee000 ph data[2]=0:bfee000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0b9af000 ph data[3]=0:b9af000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c028000 ph data[4]=0:c028000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0b931000 ph data[5]=0:b931000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bf2a000 ph data[6]=0:bf2a000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0b98b000 ph data[7]=0:b98b000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bf64000 ph data[8]=0:bf64000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afc55000 ph data[9]=0:afc55000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bfde000 ph data[10]=0:bfde000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0b9a7000 ph data[11]=0:b9a7000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c020000 ph data[12]=0:c020000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0ba29000 ph data[13]=0:ba29000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bf1a000 ph data[14]=0:bf1a000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0b97b000 set TERM ph data[15]=0:b97b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba24000 ph data[0]=0:ba24000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0be55000 ph data[1]=0:be55000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bae6000 ph data[2]=0:bae6000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb1f000 ph data[3]=0:bb1f000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb48000 ph data[4]=0:bb48000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bad1000 ph data[5]=0:bad1000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0ba72000 ph data[6]=0:ba72000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb03000 ph data[7]=0:bb03000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bbd4000 ph data[8]=0:bbd4000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bda5000 ph data[9]=0:bda5000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0be3e000 ph data[10]=0:be3e000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bdbf000 ph data[11]=0:bdbf000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb40000 ph data[12]=0:bb40000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bac9000 ph data[13]=0:bac9000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0ba6a000 ph data[14]=0:ba6a000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bafb000 set TERM ph data[15]=0:bafb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bbcc000 ph data[0]=0:bbcc000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bdad000 ph data[1]=0:bdad000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bb9e000 ph data[2]=0:bb9e000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb6f000 ph data[3]=0:bb6f000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0baf8000 ph data[4]=0:baf8000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bc11000 ph data[5]=0:bc11000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0ba62000 ph data[6]=0:ba62000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0baf3000 ph data[7]=0:baf3000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bc2c000 ph data[8]=0:bc2c000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb95000 ph data[9]=0:bb95000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bdae000 ph data[10]=0:bdae000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bdb7000 ph data[11]=0:bdb7000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0be00000 ph data[12]=0:be00000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bdb9000 ph data[13]=0:bdb9000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bbca000 ph data[14]=0:bbca000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0baeb000 set TERM ph data[15]=0:baeb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0baac000 ph data[0]=0:baac000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bb8d000 ph data[1]=0:bb8d000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bb1e000 ph data[2]=0:bb1e000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb9f000 ph data[3]=0:bb9f000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bbf0000 ph data[4]=0:bbf0000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bdc1000 ph data[5]=0:bdc1000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bbb2000 ph data[6]=0:bbb2000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bc33000 ph data[7]=0:bc33000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0baa4000 ph data[8]=0:baa4000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bbfd000 ph data[9]=0:bbfd000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bb3e000 ph data[10]=0:bb3e000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bb97000 ph data[11]=0:bb97000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bb78000 ph data[12]=0:bb78000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0ba21000 ph data[13]=0:ba21000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:afe12000 ph data[14]=0:afe12000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0b96b000 set TERM ph data[15]=0:b96b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bf5c000 ph data[0]=0:bf5c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afc4d000 ph data[1]=0:afc4d000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bfd6000 ph data[2]=0:bfd6000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afc3f000 ph data[3]=0:afc3f000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c018000 ph data[4]=0:c018000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0ba19000 ph data[5]=0:ba19000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:afe22000 ph data[6]=0:afe22000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0b963000 ph data[7]=0:b963000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bf54000 ph data[8]=0:bf54000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afc45000 ph data[9]=0:afc45000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bfce000 ph data[10]=0:bfce000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0b99f000 ph data[11]=0:b99f000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c010000 ph data[12]=0:c010000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0ba11000 ph data[13]=0:ba11000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bf32000 set TERM ph data[14]=0:bf32000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba2c000 ph data[0]=0:ba2c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb15000 ph data[1]=0:bb15000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bfc6000 ph data[2]=0:bfc6000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0b997000 ph data[3]=0:b997000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0b8b8000 ph data[4]=0:b8b8000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bad9000 ph data[5]=0:bad9000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0ba7a000 ph data[6]=0:ba7a000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb0b000 ph data[7]=0:bb0b000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bf4c000 ph data[8]=0:bf4c000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:afc3d000 ph data[9]=0:afc3d000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bfbe000 ph data[10]=0:bfbe000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0b98f000 ph data[11]=0:b98f000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0c008000 ph data[12]=0:c008000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0ba09000 ph data[13]=0:ba09000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:afe1a000 ph data[14]=0:afe1a000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0ba4b000 set TERM ph data[15]=0:ba4b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bf44000 ph data[0]=0:bf44000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:afe55000 ph data[1]=0:afe55000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bfb6000 ph data[2]=0:bfb6000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0b97f000 ph data[3]=0:b97f000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0c000000 ph data[4]=0:c000000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0ba01000 ph data[5]=0:ba01000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:afe0a000 ph data[6]=0:afe0a000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0ba43000 ph data[7]=0:ba43000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bf34000 ph data[8]=0:bf34000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:afe4d000 ph data[9]=0:afe4d000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bfa6000 ph data[10]=0:bfa6000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0ba77000 ph data[11]=0:ba77000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bff8000 ph data[12]=0:bff8000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b9f9000 ph data[13]=0:b9f9000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:afe02000 ph data[14]=0:afe02000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0ba3b000 set TERM ph data[15]=0:ba3b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:afe44000 ph data[0]=0:afe44000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afe45000 ph data[0]=0:afe44000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bf9e000 ph data[1]=0:bf9e000 (fff) get Phys(data[n=2+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0ba6f000 ph data[2]=0:ba6f000 (fff) get Phys(data[n=3+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0b8b0000 ph data[3]=0:b8b0000 (fff) get Phys(data[n=4+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0b9f1000 ph data[4]=0:b9f1000 (fff) get Phys(data[n=5+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:afdfa000 ph data[5]=0:afdfa000 (fff) get Phys(data[n=6+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0ba33000 ph data[6]=0:ba33000 (fff) get Phys(data[n=7+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:afe3c000 ph data[7]=0:afe3c000 (fff) get Phys(data[n=8+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afe3d000 ph data[7]=0:afe3c000 (1fff) get Phys(data[n=8+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bf96000 ph data[8]=0:bf96000 (fff) get Phys(data[n=9+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0b987000 ph data[9]=0:b987000 (fff) get Phys(data[n=10+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0b8a8000 ph data[10]=0:b8a8000 (fff) get Phys(data[n=11+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:afc61000 ph data[11]=0:afc61000 (fff) get Phys(data[n=12+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:afdf2000 ph data[12]=0:afdf2000 (fff) get Phys(data[n=13+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0ba2b000 set TERM ph data[13]=0:ba2b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf038 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:afe34000 ph data[0]=0:afe34000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0b99d000 ph data[1]=0:b99d000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:afc96000 ph data[2]=0:afc96000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0ba67000 ph data[3]=0:ba67000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0b8a0000 ph data[4]=0:b8a0000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:afc59000 ph data[5]=0:afc59000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:afc4a000 ph data[6]=0:afc4a000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0ba23000 ph data[7]=0:ba23000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:afe2c000 ph data[8]=0:afe2c000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b995000 ph data[9]=0:b995000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:afc8e000 ph data[10]=0:afc8e000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0ba5f000 ph data[11]=0:ba5f000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b898000 ph data[12]=0:b898000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:afc51000 ph data[13]=0:afc51000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afc42000 ph data[14]=0:afc42000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0ba1b000 set TERM ph data[15]=0:ba1b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xe, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78019e4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba34000 ph data[0]=0:ba34000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb1d000 ph data[1]=0:bb1d000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0baf6000 ph data[2]=0:baf6000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb2f000 ph data[3]=0:bb2f000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb58000 ph data[4]=0:bb58000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bc09000 ph data[5]=0:bc09000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bfaa000 ph data[6]=0:bfaa000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb43000 ph data[7]=0:bb43000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:3f824000 ph data[8]=0:3f824000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:afe25000 ph data[9]=0:afe25000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3f83e000 ph data[10]=0:3f83e000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:afc5f000 ph data[11]=0:afc5f000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb50000 ph data[12]=0:bb50000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bae1000 ph data[13]=0:bae1000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0ba82000 ph data[14]=0:ba82000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb4b000 set TERM ph data[15]=0:bb4b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:38a54000 ph data[0]=0:38a54000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bbed000 ph data[1]=0:bbed000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bbee000 ph data[1]=0:bbed000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb77000 ph data[2]=0:bb77000 (fff) get Phys(data[n=3+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bbf8000 ph data[3]=0:bbf8000 (fff) get Phys(data[n=4+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b959000 ph data[4]=0:b959000 (fff) get Phys(data[n=5+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bf52000 ph data[5]=0:bf52000 (fff) get Phys(data[n=6+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:afe33000 ph data[6]=0:afe33000 (fff) get Phys(data[n=7+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:38a4c000 ph data[7]=0:38a4c000 (fff) get Phys(data[n=8+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bf65000 ph data[8]=0:bf65000 (fff) get Phys(data[n=9+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0c046000 ph data[9]=0:c046000 (fff) get Phys(data[n=10+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb7f000 ph data[10]=0:bb7f000 (fff) get Phys(data[n=11+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bc00000 ph data[11]=0:bc00000 (fff) get Phys(data[n=12+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb79000 ph data[12]=0:bb79000 (fff) get Phys(data[n=13+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb5a000 ph data[13]=0:bb5a000 (fff) get Phys(data[n=14+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bd9b000 set TERM ph data[14]=0:bd9b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bfe4000 ph data[0]=0:bfe4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3f77d000 ph data[1]=0:3f77d000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0c07e000 ph data[2]=0:c07e000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bf4f000 ph data[3]=0:bf4f000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38ad8000 ph data[4]=0:38ad8000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:afdd9000 ph data[5]=0:afdd9000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38b42000 ph data[6]=0:38b42000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bf1b000 ph data[7]=0:bf1b000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0c004000 ph data[8]=0:c004000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3f74d000 ph data[9]=0:3f74d000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0c086000 ph data[10]=0:c086000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f77f000 ph data[11]=0:3f77f000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c0c0000 ph data[12]=0:c0c0000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bf09000 ph data[13]=0:bf09000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38b3a000 ph data[14]=0:38b3a000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bf23000 set TERM ph data[15]=0:bf23000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bffc000 ph data[0]=0:bffc000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:3f755000 ph data[1]=0:3f755000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0c016000 ph data[2]=0:c016000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bf6f000 ph data[3]=0:bf6f000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c058000 ph data[4]=0:c058000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bf11000 ph data[5]=0:bf11000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bfd2000 ph data[6]=0:bfd2000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bf53000 ph data[7]=0:bf53000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:afe1c000 ph data[8]=0:afe1c000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b98d000 ph data[9]=0:b98d000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0c006000 ph data[10]=0:c006000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f787000 ph data[11]=0:3f787000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c0d8000 ph data[12]=0:c0d8000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bf19000 ph data[13]=0:bf19000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bfda000 ph data[14]=0:bfda000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bf5b000 set TERM ph data[15]=0:bf5b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bb0c000 ph data[0]=0:bb0c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bbf5000 ph data[1]=0:bbf5000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3f7de000 ph data[2]=0:3f7de000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:afe17000 ph data[3]=0:afe17000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3f7e8000 ph data[4]=0:3f7e8000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:afe09000 ph data[5]=0:afe09000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bf72000 ph data[6]=0:bf72000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:afe4b000 ph data[7]=0:afe4b000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bb14000 ph data[8]=0:bb14000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bb75000 ph data[9]=0:bb75000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3f72e000 ph data[10]=0:3f72e000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:afe1f000 ph data[11]=0:afe1f000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f7e0000 ph data[12]=0:3f7e0000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:afe11000 ph data[13]=0:afe11000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3f76a000 ph data[14]=0:3f76a000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:afddb000 set TERM ph data[15]=0:afddb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba84000 ph data[0]=0:ba84000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bb6d000 ph data[1]=0:bb6d000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bb06000 ph data[2]=0:bb06000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bb3f000 ph data[3]=0:bb3f000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f7d8000 ph data[4]=0:3f7d8000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b969000 ph data[5]=0:b969000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3f762000 ph data[6]=0:3f762000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:afde3000 ph data[7]=0:afde3000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0ba3c000 ph data[8]=0:ba3c000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb65000 ph data[9]=0:bb65000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bafe000 ph data[10]=0:bafe000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb37000 ph data[11]=0:bb37000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bdf0000 ph data[12]=0:bdf0000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:afe19000 ph data[13]=0:afe19000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb62000 ph data[14]=0:bb62000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afdeb000 set TERM ph data[15]=0:afdeb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:afe14000 ph data[0]=0:afe14000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0b97d000 ph data[1]=0:b97d000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:afc86000 ph data[2]=0:afc86000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0ba57000 ph data[3]=0:ba57000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0b890000 ph data[4]=0:b890000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:afc41000 ph data[5]=0:afc41000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:afe52000 ph data[6]=0:afe52000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0ba13000 ph data[7]=0:ba13000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:afe0c000 ph data[8]=0:afe0c000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0b975000 ph data[9]=0:b975000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:afc7e000 ph data[10]=0:afc7e000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0b877000 ph data[11]=0:b877000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0b888000 ph data[12]=0:b888000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:afe51000 ph data[13]=0:afe51000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:afe4a000 ph data[14]=0:afe4a000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:afc7b000 set TERM ph data[15]=0:afc7b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf4d4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:afc64000 ph data[0]=0:afc64000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0b965000 ph data[1]=0:b965000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:afc76000 ph data[2]=0:afc76000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0ba4f000 ph data[3]=0:ba4f000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0b8f8000 ph data[4]=0:b8f8000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0b919000 ph data[5]=0:b919000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:afe42000 ph data[6]=0:afe42000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:afc73000 ph data[7]=0:afc73000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:afc5c000 ph data[8]=0:afc5c000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0ba5d000 ph data[9]=0:ba5d000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:afc6e000 ph data[10]=0:afc6e000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0ba47000 ph data[11]=0:ba47000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b8f0000 ph data[12]=0:b8f0000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:afe49000 ph data[13]=0:afe49000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afe3a000 set TERM ph data[14]=0:afe3a000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3f794000 ph data[0]=0:3f794000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bf1d000 ph data[1]=0:bf1d000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:afc66000 ph data[2]=0:afc66000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0ba3f000 ph data[3]=0:ba3f000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0b8e8000 ph data[4]=0:b8e8000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:afe41000 ph data[5]=0:afe41000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:afe32000 ph data[6]=0:afe32000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:afc63000 ph data[7]=0:afc63000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:afc54000 ph data[8]=0:afc54000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0ba55000 ph data[9]=0:ba55000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:afc5e000 ph data[10]=0:afc5e000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:afd6f000 ph data[11]=0:afd6f000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0b880000 ph data[12]=0:b880000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0b921000 ph data[13]=0:b921000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:afe2a000 ph data[14]=0:afe2a000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:afc5b000 set TERM ph data[15]=0:afc5b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:afe54000 ph data[0]=0:afe54000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0b96d000 ph data[1]=0:b96d000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0b89e000 ph data[2]=0:b89e000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:afd67000 ph data[3]=0:afd67000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0b8e0000 ph data[4]=0:b8e0000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b911000 ph data[5]=0:b911000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0b992000 ph data[6]=0:b992000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:afc53000 ph data[7]=0:afc53000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:afc4c000 ph data[8]=0:afc4c000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0ba4d000 ph data[9]=0:ba4d000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0b896000 ph data[10]=0:b896000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:afd5f000 ph data[11]=0:afd5f000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0b8d8000 ph data[12]=0:b8d8000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b909000 ph data[13]=0:b909000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0b98a000 ph data[14]=0:b98a000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afc43000 set TERM ph data[15]=0:afc43000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:afc44000 ph data[0]=0:afc44000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0ba45000 ph data[1]=0:ba45000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0b88e000 ph data[2]=0:b88e000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:afc97000 ph data[3]=0:afc97000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0b8d0000 ph data[4]=0:b8d0000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0b901000 ph data[5]=0:b901000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0b982000 ph data[6]=0:b982000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0b943000 ph data[7]=0:b943000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:afc3c000 ph data[8]=0:afc3c000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0ba3d000 ph data[9]=0:ba3d000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0b87e000 ph data[10]=0:b87e000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afc8f000 ph data[11]=0:afc8f000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0b8c0000 ph data[12]=0:b8c0000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bc01000 ph data[13]=0:bc01000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0b97a000 ph data[14]=0:b97a000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0b93b000 set TERM ph data[15]=0:b93b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:afe4c000 ph data[0]=0:afe4c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0ba2d000 ph data[1]=0:ba2d000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:afd6e000 ph data[2]=0:afd6e000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afc87000 ph data[3]=0:afc87000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0ba78000 ph data[4]=0:ba78000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0b8f9000 ph data[5]=0:b8f9000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0b972000 ph data[6]=0:b972000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:afc4b000 ph data[7]=0:afc4b000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b9bc000 ph data[8]=0:b9bc000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0ba25000 ph data[9]=0:ba25000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:afd66000 ph data[10]=0:afd66000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:afc7f000 ph data[11]=0:afc7f000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0ba70000 ph data[12]=0:ba70000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0b8f1000 ph data[13]=0:b8f1000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0b96a000 ph data[14]=0:b96a000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0b933000 set TERM ph data[15]=0:b933000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bbd4000 ph data[0]=0:bbd4000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bda5000 ph data[1]=0:bda5000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0be3e000 ph data[2]=0:be3e000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb1f000 ph data[3]=0:bb1f000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bb48000 ph data[4]=0:bb48000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bad1000 ph data[5]=0:bad1000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0ba72000 ph data[6]=0:ba72000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb03000 ph data[7]=0:bb03000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba24000 ph data[8]=0:ba24000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0be55000 ph data[9]=0:be55000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bae6000 ph data[10]=0:bae6000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:afc67000 ph data[11]=0:afc67000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f728000 ph data[12]=0:3f728000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0b961000 ph data[13]=0:b961000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bf5a000 ph data[14]=0:bf5a000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:afe3b000 set TERM ph data[15]=0:afe3b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3f79c000 ph data[0]=0:3f79c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:afe35000 ph data[1]=0:afe35000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3f836000 ph data[2]=0:3f836000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:afc6f000 ph data[3]=0:afc6f000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3f7f0000 ph data[4]=0:3f7f0000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:afe01000 ph data[5]=0:afe01000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bf62000 ph data[6]=0:bf62000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:afe43000 ph data[7]=0:afe43000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3f73c000 ph data[8]=0:3f73c000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bf0d000 ph data[9]=0:bf0d000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3f726000 ph data[10]=0:3f726000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:afc77000 ph data[11]=0:afc77000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0b8c8000 ph data[12]=0:b8c8000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b8e9000 ph data[13]=0:b8e9000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0b962000 ph data[14]=0:b962000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0b92b000 set TERM ph data[15]=0:b92b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0b9b4000 ph data[0]=0:b9b4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afc9d000 ph data[1]=0:afc9d000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3f7e6000 ph data[2]=0:3f7e6000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0b977000 ph data[3]=0:b977000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0ba68000 ph data[4]=0:ba68000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0ba89000 ph data[5]=0:ba89000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0b95a000 ph data[6]=0:b95a000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0b923000 ph data[7]=0:b923000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0b994000 ph data[8]=0:b994000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0ba35000 ph data[9]=0:ba35000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:afd5e000 ph data[10]=0:afd5e000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0b96f000 ph data[11]=0:b96f000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0ba60000 ph data[12]=0:ba60000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0ba81000 ph data[13]=0:ba81000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0ba52000 ph data[14]=0:ba52000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0b91b000 set TERM ph data[15]=0:b91b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0b9ac000 ph data[0]=0:b9ac000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afc8d000 ph data[1]=0:afc8d000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0ba1e000 ph data[2]=0:ba1e000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0b967000 ph data[3]=0:b967000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0ba58000 ph data[4]=0:ba58000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0ba79000 ph data[5]=0:ba79000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0ba4a000 ph data[6]=0:ba4a000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0b913000 ph data[7]=0:b913000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b9a4000 ph data[8]=0:b9a4000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afc85000 ph data[9]=0:afc85000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0ba0e000 ph data[10]=0:ba0e000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0b95f000 ph data[11]=0:b95f000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0ba50000 ph data[12]=0:ba50000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0ba71000 ph data[13]=0:ba71000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0ba42000 set TERM ph data[14]=0:ba42000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0baf8000 ph data[0]=0:baf8000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bc11000 ph data[1]=0:bc11000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba62000 ph data[2]=0:ba62000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0baf3000 ph data[3]=0:baf3000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bbcc000 ph data[4]=0:bbcc000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bdad000 ph data[5]=0:bdad000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bb9e000 ph data[6]=0:bb9e000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb6f000 ph data[7]=0:bb6f000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bb40000 ph data[8]=0:bb40000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bac9000 ph data[9]=0:bac9000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0ba6a000 ph data[10]=0:ba6a000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bafb000 ph data[11]=0:bafb000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0b99c000 ph data[12]=0:b99c000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:afc7d000 ph data[13]=0:afc7d000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0b9f6000 ph data[14]=0:b9f6000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bdbf000 set TERM ph data[15]=0:bdbf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba48000 ph data[0]=0:ba48000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0ba69000 ph data[1]=0:ba69000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba3a000 ph data[2]=0:ba3a000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0b90b000 ph data[3]=0:b90b000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0b98c000 ph data[4]=0:b98c000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:afc75000 ph data[5]=0:afc75000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0ba06000 ph data[6]=0:ba06000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0b957000 ph data[7]=0:b957000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0ba40000 ph data[8]=0:ba40000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0ba61000 ph data[9]=0:ba61000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0ba2a000 ph data[10]=0:ba2a000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bc23000 ph data[11]=0:bc23000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0b984000 ph data[12]=0:b984000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:afc6d000 ph data[13]=0:afc6d000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0b9fe000 ph data[14]=0:b9fe000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0b94f000 set TERM ph data[15]=0:b94f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bb30000 ph data[0]=0:bb30000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0ba59000 ph data[1]=0:ba59000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0ba22000 ph data[2]=0:ba22000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bacb000 ph data[3]=0:bacb000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0ba7c000 ph data[4]=0:ba7c000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:afc65000 ph data[5]=0:afc65000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0ba16000 ph data[6]=0:ba16000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0b947000 ph data[7]=0:b947000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bb28000 ph data[8]=0:bb28000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0ba51000 ph data[9]=0:ba51000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0ba1a000 ph data[10]=0:ba1a000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0baab000 ph data[11]=0:baab000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0ba74000 ph data[12]=0:ba74000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0b95d000 ph data[13]=0:b95d000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0b9ee000 ph data[14]=0:b9ee000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0b93f000 set TERM ph data[15]=0:b93f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bb20000 ph data[0]=0:bb20000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0ba49000 ph data[1]=0:ba49000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0ba32000 ph data[2]=0:ba32000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0baa3000 ph data[3]=0:baa3000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0ba6c000 ph data[4]=0:ba6c000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0b955000 ph data[5]=0:b955000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0b9e6000 ph data[6]=0:b9e6000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bd8f000 ph data[7]=0:bd8f000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bb18000 ph data[8]=0:bb18000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0ba41000 ph data[9]=0:ba41000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:afc8a000 ph data[10]=0:afc8a000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0ba9b000 ph data[11]=0:ba9b000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0ba5c000 ph data[12]=0:ba5c000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0b94d000 ph data[13]=0:b94d000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bade000 ph data[14]=0:bade000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0bad7000 set TERM ph data[15]=0:bad7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bb78000 ph data[0]=0:bb78000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0ba21000 ph data[1]=0:ba21000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:afe12000 ph data[2]=0:afe12000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0b96b000 ph data[3]=0:b96b000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bf5c000 ph data[4]=0:bf5c000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:afc4d000 ph data[5]=0:afc4d000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bfd6000 ph data[6]=0:bfd6000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb97000 ph data[7]=0:bb97000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bbf0000 ph data[8]=0:bbf0000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bdc1000 ph data[9]=0:bdc1000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bbb2000 ph data[10]=0:bbb2000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bc33000 ph data[11]=0:bc33000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0baa4000 ph data[12]=0:baa4000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bbfd000 ph data[13]=0:bbfd000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb3e000 ph data[14]=0:bb3e000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb9f000 set TERM ph data[15]=0:bb9f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0be00000 ph data[0]=0:be00000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bdb9000 ph data[1]=0:bdb9000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bbca000 ph data[2]=0:bbca000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0baeb000 ph data[3]=0:baeb000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bc2c000 ph data[4]=0:bc2c000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bb8d000 ph data[5]=0:bb8d000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb1e000 ph data[6]=0:bb1e000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bacf000 ph data[7]=0:bacf000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bb08000 ph data[8]=0:bb08000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0ba39000 ph data[9]=0:ba39000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:afc82000 ph data[10]=0:afc82000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0ba7b000 ph data[11]=0:ba7b000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0ba54000 ph data[12]=0:ba54000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b945000 ph data[13]=0:b945000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0babe000 ph data[14]=0:babe000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bac7000 set TERM ph data[15]=0:bac7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf4d4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bb00000 ph data[0]=0:bb00000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0ba31000 ph data[1]=0:ba31000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:afc7a000 ph data[2]=0:afc7a000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0ba93000 ph data[3]=0:ba93000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0ba4c000 ph data[4]=0:ba4c000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0b93d000 ph data[5]=0:b93d000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bad6000 ph data[6]=0:bad6000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bab7000 ph data[7]=0:bab7000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0b938000 ph data[8]=0:b938000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0b9e9000 ph data[9]=0:b9e9000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:afc6a000 ph data[10]=0:afc6a000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0ba8b000 ph data[11]=0:ba8b000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0ba64000 ph data[12]=0:ba64000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0b935000 ph data[13]=0:b935000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bace000 ph data[14]=0:bace000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0baa7000 set TERM ph data[15]=0:baa7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0b930000 ph data[0]=0:b930000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0b9e1000 ph data[1]=0:b9e1000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:afc62000 ph data[2]=0:afc62000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0ba83000 ph data[3]=0:ba83000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0ba44000 ph data[4]=0:ba44000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0b92d000 ph data[5]=0:b92d000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bac6000 ph data[6]=0:bac6000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0babf000 ph data[7]=0:babf000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b928000 ph data[8]=0:b928000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b9d9000 ph data[9]=0:b9d9000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:afc5a000 ph data[10]=0:afc5a000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0ba73000 ph data[11]=0:ba73000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b87c000 ph data[12]=0:b87c000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0b925000 ph data[13]=0:b925000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bab6000 set TERM ph data[14]=0:bab6000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051778, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051778) AtapiVirtToPhysAddr_: f7051778 -> 00000000:08499778 set TERM ph data[0]=0:8499778 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051778, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051778) AtapiVirtToPhysAddr_: f7051778 -> 00000000:08499778 set TERM ph data[0]=0:8499778 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051778, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051778) AtapiVirtToPhysAddr_: f7051778 -> 00000000:08499778 set TERM ph data[0]=0:8499778 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051778, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051778) AtapiVirtToPhysAddr_: f7051778 -> 00000000:08499778 set TERM ph data[0]=0:8499778 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5E1F028, \, FALSE, F6FBF468) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DA008, B64BC778, B5DFB618, F6FBF66C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, F6FBF734, \, FALSE, F6FBF3D0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBF734, B61DA008, B64BC778, B5E2B2E0, F6FBF370) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5E1F028, \autorun.inf, FALSE, F6FBF454) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BC830, B61DA008, autorun.inf, FALSE, F6FBEFAC) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea7c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 71300a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 71300a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5a608 set TERM ph data[0]=0:8d5a608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x71300a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960e860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960e860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b16000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0ba6b000 ph data[0]=0:ba6b000 (fff) get Phys(data[n=1+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:afc9c000 ph data[1]=0:afc9c000 (fff) get Phys(data[n=2+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb15000 ph data[2]=0:bb15000 (fff) get Phys(data[n=3+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0c00e000 ph data[3]=0:c00e000 (fff) get Phys(data[n=4+1000]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0b997000 ph data[4]=0:b997000 (fff) get Phys(data[n=5+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0c0d0000 ph data[5]=0:c0d0000 (fff) get Phys(data[n=6+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bb21000 ph data[6]=0:bb21000 (fff) get Phys(data[n=7+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb12000 ph data[7]=0:bb12000 (fff) get Phys(data[n=8+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bc43000 ph data[8]=0:bc43000 (fff) get Phys(data[n=9+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0ba2c000 ph data[9]=0:ba2c000 (fff) get Phys(data[n=10+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bf95000 ph data[10]=0:bf95000 (fff) get Phys(data[n=11+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0baee000 ph data[11]=0:baee000 (fff) get Phys(data[n=12+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3f707000 ph data[12]=0:3f707000 (fff) get Phys(data[n=13+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0c0c8000 ph data[13]=0:c0c8000 (fff) get Phys(data[n=14+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bf21000 ph data[14]=0:bf21000 (fff) get Phys(data[n=15+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bfe2000 set TERM ph data[15]=0:bfe2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960e8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960e8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b26000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bf63000 ph data[0]=0:bf63000 (fff) get Phys(data[n=1+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bff4000 ph data[1]=0:bff4000 (fff) get Phys(data[n=2+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bf85000 ph data[2]=0:bf85000 (fff) get Phys(data[n=3+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bfde000 ph data[3]=0:bfde000 (fff) get Phys(data[n=4+1000]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bb27000 ph data[4]=0:bb27000 (fff) get Phys(data[n=5+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0c020000 ph data[5]=0:c020000 (fff) get Phys(data[n=6+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bf29000 ph data[6]=0:bf29000 (fff) get Phys(data[n=7+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bfea000 ph data[7]=0:bfea000 (fff) get Phys(data[n=8+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3f8bb000 ph data[8]=0:3f8bb000 (fff) get Phys(data[n=9+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0c03c000 ph data[9]=0:c03c000 (fff) get Phys(data[n=10+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:afc55000 ph data[10]=0:afc55000 (fff) get Phys(data[n=11+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bfee000 ph data[11]=0:bfee000 (fff) get Phys(data[n=12+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b9a7000 ph data[12]=0:b9a7000 (fff) get Phys(data[n=13+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0c028000 ph data[13]=0:c028000 (fff) get Phys(data[n=14+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0ba29000 ph data[14]=0:ba29000 (fff) get Phys(data[n=15+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bf1a000 set TERM ph data[15]=0:bf1a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960e960, OrigWordsRequested 0x1700, DevSize 0x17 IdeReadWrite (REQ): Starting sector is 3960e960, Number of WORDS 0x1700, DevSize 0x17 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b36000, count 2e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b97b000 ph data[0]=0:b97b000 (fff) get Phys(data[n=1+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bf64000 ph data[1]=0:bf64000 (fff) get Phys(data[n=2+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afdfd000 set TERM ph data[2]=0:afdfd000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960e860, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe9c4 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 113120, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 113120, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960e8e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960e960, Count 0x17(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x3, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1700, WordsLeft 1700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2e00, full size 2e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb64be670 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa94c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x113120, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \, FALSE, F6FBF468) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DBAC0, B64BD778, B5E21608, F6FBF66C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, F6FBF734, \, FALSE, F6FBF3D0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBF734, B61DBAC0, B64BD778, B5E2B2E0, F6FBF370) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \autorun.inf, FALSE, F6FBF454) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, autorun.inf, FALSE, F6FBEFAC) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbea7c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe9c4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe80c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bf87000 ph data[0]=0:bf87000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bb70000 set TERM ph data[1]=0:bb70000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3f721000 ph data[0]=0:3f721000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:65f72000 ph data[1]=0:65f72000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bb6b000 ph data[2]=0:bb6b000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb1c000 ph data[3]=0:bb1c000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bde5000 ph data[4]=0:bde5000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bb16000 ph data[5]=0:bb16000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bda7000 ph data[6]=0:bda7000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bde8000 ph data[7]=0:bde8000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:38be9000 ph data[8]=0:38be9000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:65f82000 ph data[9]=0:65f82000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bbd3000 ph data[10]=0:bbd3000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bc3c000 ph data[11]=0:bc3c000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:38b35000 ph data[12]=0:38b35000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bda6000 ph data[13]=0:bda6000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3f767000 ph data[14]=0:3f767000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0c070000 set TERM ph data[15]=0:c070000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3f8c9000 ph data[0]=0:3f8c9000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bbfa000 ph data[1]=0:bbfa000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3f70b000 ph data[2]=0:3f70b000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bbc4000 ph data[3]=0:bbc4000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3890d000 ph data[4]=0:3890d000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0c036000 ph data[5]=0:c036000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bc27000 ph data[6]=0:bc27000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0c060000 ph data[7]=0:c060000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bd91000 ph data[8]=0:bd91000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bc12000 ph data[9]=0:bc12000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bff3000 ph data[10]=0:bff3000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0c014000 ph data[11]=0:c014000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bc25000 ph data[12]=0:bc25000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0c026000 ph data[13]=0:c026000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3f777000 ph data[14]=0:3f777000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0c080000 set TERM ph data[15]=0:c080000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bc49000 ph data[0]=0:bc49000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bfb2000 ph data[1]=0:bfb2000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:38b03000 ph data[2]=0:38b03000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bb84000 ph data[3]=0:bb84000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:38b25000 ph data[4]=0:38b25000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bc16000 ph data[5]=0:bc16000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bc3f000 ph data[6]=0:bc3f000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bdb8000 ph data[7]=0:bdb8000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bb51000 ph data[8]=0:bb51000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0bc1a000 ph data[9]=0:bc1a000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bbfb000 ph data[10]=0:bbfb000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f7fc000 ph data[11]=0:3f7fc000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bb0d000 ph data[12]=0:bb0d000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0c08e000 ph data[13]=0:c08e000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:38aef000 ph data[14]=0:38aef000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:64230000 set TERM ph data[15]=0:64230000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bab9000 ph data[0]=0:bab9000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0ba12000 ph data[1]=0:ba12000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bc0b000 ph data[2]=0:bc0b000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bc14000 ph data[3]=0:bc14000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0bd95000 ph data[4]=0:bd95000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bc36000 ph data[5]=0:bc36000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bb07000 ph data[6]=0:bb07000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bae0000 ph data[7]=0:bae0000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0ba19000 ph data[8]=0:ba19000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0ba5a000 ph data[9]=0:ba5a000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0badb000 ph data[10]=0:badb000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0ba14000 ph data[11]=0:ba14000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bafd000 ph data[12]=0:bafd000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0c096000 ph data[13]=0:c096000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afc57000 ph data[14]=0:afc57000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0c040000 set TERM ph data[15]=0:c040000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0ba69000 ph data[0]=0:ba69000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:afe22000 ph data[1]=0:afe22000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:afe2b000 ph data[2]=0:afe2b000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bf7c000 ph data[3]=0:bf7c000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:afe15000 ph data[4]=0:afe15000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bfc6000 ph data[5]=0:bfc6000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0b94f000 ph data[6]=0:b94f000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bb40000 ph data[7]=0:bb40000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bac9000 ph data[8]=0:bac9000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0ba2a000 ph data[9]=0:ba2a000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bc23000 ph data[10]=0:bc23000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0ba74000 ph data[11]=0:ba74000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:afc65000 ph data[12]=0:afc65000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0b9fe000 ph data[13]=0:b9fe000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0b957000 ph data[14]=0:b957000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0baf8000 set TERM ph data[15]=0:baf8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bc11000 ph data[0]=0:bc11000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0ba3a000 ph data[1]=0:ba3a000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0b90b000 ph data[2]=0:b90b000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0ba7c000 ph data[3]=0:ba7c000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:afc6d000 ph data[4]=0:afc6d000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0ba06000 ph data[5]=0:ba06000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bdbf000 ph data[6]=0:bdbf000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0b928000 ph data[7]=0:b928000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0b9d9000 ph data[8]=0:b9d9000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0ba6a000 ph data[9]=0:ba6a000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bafb000 ph data[10]=0:bafb000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0b984000 ph data[11]=0:b984000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:afc75000 ph data[12]=0:afc75000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b9f6000 ph data[13]=0:b9f6000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bb6f000 ph data[14]=0:bb6f000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0b930000 set TERM ph data[15]=0:b930000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0b9e1000 ph data[0]=0:b9e1000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0ba62000 ph data[1]=0:ba62000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0baf3000 ph data[2]=0:baf3000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0b98c000 ph data[3]=0:b98c000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:afc7d000 ph data[4]=0:afc7d000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bb9e000 ph data[5]=0:bb9e000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0ba9f000 ph data[6]=0:ba9f000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0b938000 ph data[7]=0:b938000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0b9e9000 ph data[8]=0:b9e9000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afc5a000 ph data[9]=0:afc5a000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0ba73000 ph data[10]=0:ba73000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0b99c000 ph data[11]=0:b99c000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bdad000 ph data[12]=0:bdad000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0bab6000 ph data[13]=0:bab6000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0babf000 ph data[14]=0:babf000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bb00000 set TERM ph data[15]=0:bb00000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0ba31000 ph data[0]=0:ba31000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afc62000 ph data[1]=0:afc62000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0ba83000 ph data[2]=0:ba83000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0bbcc000 ph data[3]=0:bbcc000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0b925000 ph data[4]=0:b925000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bac6000 ph data[5]=0:bac6000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0baa7000 ph data[6]=0:baa7000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bb08000 ph data[7]=0:bb08000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0ba39000 ph data[8]=0:ba39000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afc6a000 ph data[9]=0:afc6a000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0ba8b000 ph data[10]=0:ba8b000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0b87c000 ph data[11]=0:b87c000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b92d000 ph data[12]=0:b92d000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bace000 ph data[13]=0:bace000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bab7000 ph data[14]=0:bab7000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0be00000 set TERM ph data[15]=0:be00000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf120 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0bc49000 ph data[0]=0:bc49000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bfb2000 ph data[1]=0:bfb2000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bff3000 ph data[2]=0:bff3000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0c014000 ph data[3]=0:c014000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bc25000 ph data[4]=0:bc25000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0c026000 ph data[5]=0:c026000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3f777000 ph data[6]=0:3f777000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0c080000 ph data[7]=0:c080000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bd91000 ph data[8]=0:bd91000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bc12000 ph data[9]=0:bc12000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3f70b000 ph data[10]=0:3f70b000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bbc4000 ph data[11]=0:bbc4000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3890d000 ph data[12]=0:3890d000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0c036000 ph data[13]=0:c036000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bc27000 ph data[14]=0:bc27000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0c060000 set TERM ph data[15]=0:c060000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf120 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3f8c9000 ph data[0]=0:3f8c9000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0bbfa000 ph data[1]=0:bbfa000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bbd3000 ph data[2]=0:bbd3000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bc3c000 ph data[3]=0:bc3c000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:38b35000 ph data[4]=0:38b35000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bda6000 ph data[5]=0:bda6000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3f767000 ph data[6]=0:3f767000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0c070000 ph data[7]=0:c070000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:38be9000 ph data[8]=0:38be9000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:65f82000 ph data[9]=0:65f82000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bb6b000 ph data[10]=0:bb6b000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb1c000 ph data[11]=0:bb1c000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bde5000 ph data[12]=0:bde5000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bb16000 ph data[13]=0:bb16000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bda7000 ph data[14]=0:bda7000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0bde8000 set TERM ph data[15]=0:bde8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf120 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3f721000 ph data[0]=0:3f721000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:65f72000 ph data[1]=0:65f72000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0ba93000 ph data[2]=0:ba93000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0ba44000 ph data[3]=0:ba44000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0b935000 ph data[4]=0:b935000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0bad6000 ph data[5]=0:bad6000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0bbc7000 ph data[6]=0:bbc7000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bc48000 ph data[7]=0:bc48000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0bb41000 ph data[8]=0:bb41000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afc7a000 ph data[9]=0:afc7a000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0ba7b000 ph data[10]=0:ba7b000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0ba64000 ph data[11]=0:ba64000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0b93d000 ph data[12]=0:b93d000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0babe000 ph data[13]=0:babe000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bac7000 ph data[14]=0:bac7000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bbf0000 set TERM ph data[15]=0:bbf0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbefe4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf120 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bdb9000 ph data[0]=0:bdb9000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afc82000 ph data[1]=0:afc82000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0baeb000 ph data[2]=0:baeb000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0ba4c000 ph data[3]=0:ba4c000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0b945000 ph data[4]=0:b945000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bb1e000 ph data[5]=0:bb1e000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bacf000 ph data[6]=0:bacf000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0bb78000 ph data[7]=0:bb78000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bdc1000 ph data[8]=0:bdc1000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0bbca000 ph data[9]=0:bbca000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bc33000 ph data[10]=0:bc33000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0ba54000 ph data[11]=0:ba54000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bb8d000 ph data[12]=0:bb8d000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bb3e000 ph data[13]=0:bb3e000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0bb9f000 set TERM ph data[14]=0:bb9f000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xf, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0badb000 ph data[0]=0:badb000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0ba14000 ph data[1]=0:ba14000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bafd000 ph data[2]=0:bafd000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0c096000 ph data[3]=0:c096000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:afc57000 ph data[4]=0:afc57000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0c040000 ph data[5]=0:c040000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0ba19000 ph data[6]=0:ba19000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0ba12000 ph data[7]=0:ba12000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bc0b000 ph data[8]=0:bc0b000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0bc14000 ph data[9]=0:bc14000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bd95000 ph data[10]=0:bd95000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bc36000 ph data[11]=0:bc36000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bb07000 ph data[12]=0:bb07000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bae0000 ph data[13]=0:bae0000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bab9000 ph data[14]=0:bab9000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bc1a000 set TERM ph data[15]=0:bc1a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0bbfb000 ph data[0]=0:bbfb000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3f7fc000 ph data[1]=0:3f7fc000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0bb0d000 ph data[2]=0:bb0d000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0c08e000 ph data[3]=0:c08e000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:38aef000 ph data[4]=0:38aef000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:64230000 ph data[5]=0:64230000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0bb51000 ph data[6]=0:bb51000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bbb2000 ph data[7]=0:bbb2000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:38b03000 ph data[8]=0:38b03000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb84000 ph data[9]=0:bb84000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:38b25000 ph data[10]=0:38b25000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bc16000 ph data[11]=0:bc16000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bc3f000 ph data[12]=0:bc3f000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bdb8000 ph data[13]=0:bdb8000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0ba21000 ph data[14]=0:ba21000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afe12000 set TERM ph data[15]=0:afe12000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbebd4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0b96b000 ph data[0]=0:b96b000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bc2c000 ph data[1]=0:bc2c000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bbfd000 ph data[2]=0:bbfd000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bfd6000 ph data[3]=0:bfd6000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bb97000 ph data[4]=0:bb97000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0ba78000 ph data[5]=0:ba78000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0b8f1000 ph data[6]=0:b8f1000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0b96a000 ph data[7]=0:b96a000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0b933000 ph data[8]=0:b933000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0baa4000 ph data[9]=0:baa4000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:afc4d000 ph data[10]=0:afc4d000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afd66000 ph data[11]=0:afd66000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:afc7f000 ph data[12]=0:afc7f000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0b8c0000 ph data[13]=0:b8c0000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0b8f9000 ph data[14]=0:b8f9000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0b972000 set TERM ph data[15]=0:b972000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:afc4b000 ph data[0]=0:afc4b000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bf5c000 ph data[1]=0:bf5c000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0ba25000 ph data[2]=0:ba25000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afd6e000 ph data[3]=0:afd6e000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:afc87000 ph data[4]=0:afc87000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0b8d0000 ph data[5]=0:b8d0000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0bc01000 ph data[6]=0:bc01000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0b97a000 ph data[7]=0:b97a000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b93b000 ph data[8]=0:b93b000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b9bc000 ph data[9]=0:b9bc000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0ba2d000 ph data[10]=0:ba2d000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0b87e000 ph data[11]=0:b87e000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:afc8f000 ph data[12]=0:afc8f000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0b8d8000 ph data[13]=0:b8d8000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0b901000 ph data[14]=0:b901000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0b982000 set TERM ph data[15]=0:b982000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3f70b000 ph data[0]=0:3f70b000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bbc4000 ph data[1]=0:bbc4000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3890d000 ph data[2]=0:3890d000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0c036000 ph data[3]=0:c036000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bc27000 ph data[4]=0:bc27000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0c060000 ph data[5]=0:c060000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3f8c9000 ph data[6]=0:3f8c9000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bc12000 ph data[7]=0:bc12000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0bff3000 ph data[8]=0:bff3000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0c014000 ph data[9]=0:c014000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0bc25000 ph data[10]=0:bc25000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0c026000 ph data[11]=0:c026000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3f777000 ph data[12]=0:3f777000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0c080000 ph data[13]=0:c080000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bd91000 ph data[14]=0:bd91000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0b98a000 set TERM ph data[15]=0:b98a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0b943000 ph data[0]=0:b943000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:afe4c000 ph data[1]=0:afe4c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0ba3d000 ph data[2]=0:ba3d000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0b88e000 ph data[3]=0:b88e000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:afc97000 ph data[4]=0:afc97000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b8e0000 ph data[5]=0:b8e0000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0b909000 ph data[6]=0:b909000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0b992000 ph data[7]=0:b992000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:afc43000 ph data[8]=0:afc43000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:afc3c000 ph data[9]=0:afc3c000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0ba45000 ph data[10]=0:ba45000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0b896000 ph data[11]=0:b896000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:afd5f000 ph data[12]=0:afd5f000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0b880000 ph data[13]=0:b880000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0b911000 ph data[14]=0:b911000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afe2a000 set TERM ph data[15]=0:afe2a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:afc53000 ph data[0]=0:afc53000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afc44000 ph data[1]=0:afc44000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0ba4d000 ph data[2]=0:ba4d000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0b89e000 ph data[3]=0:b89e000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:afd67000 ph data[4]=0:afd67000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0b8e8000 ph data[5]=0:b8e8000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0b921000 ph data[6]=0:b921000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:afe32000 ph data[7]=0:afe32000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:afc5b000 ph data[8]=0:afc5b000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afc4c000 ph data[9]=0:afc4c000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0b96d000 ph data[10]=0:b96d000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afc5e000 ph data[11]=0:afc5e000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:afd6f000 ph data[12]=0:afd6f000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0ba50000 ph data[13]=0:ba50000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:afe41000 ph data[14]=0:afe41000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0ba42000 set TERM ph data[15]=0:ba42000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbebd4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:afc63000 ph data[0]=0:afc63000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afe54000 ph data[1]=0:afe54000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0ba55000 ph data[2]=0:ba55000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afc66000 ph data[3]=0:afc66000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0ba3f000 ph data[4]=0:ba3f000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0ba58000 ph data[5]=0:ba58000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0ba71000 ph data[6]=0:ba71000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0ba4a000 ph data[7]=0:ba4a000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bc1b000 ph data[8]=0:bc1b000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afc54000 ph data[9]=0:afc54000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0bf1d000 ph data[10]=0:bf1d000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0ba0e000 ph data[11]=0:ba0e000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b95f000 ph data[12]=0:b95f000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0ba60000 ph data[13]=0:ba60000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0ba79000 ph data[14]=0:ba79000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0ba52000 set TERM ph data[15]=0:ba52000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbebd4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78019e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf120 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0baeb000 ph data[0]=0:baeb000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0ba4c000 ph data[1]=0:ba4c000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0b945000 ph data[2]=0:b945000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bb1e000 ph data[3]=0:bb1e000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0bacf000 ph data[4]=0:bacf000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bbf0000 ph data[5]=0:bbf0000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0bdb9000 ph data[6]=0:bdb9000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:afc82000 ph data[7]=0:afc82000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0ba7b000 ph data[8]=0:ba7b000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0ba64000 ph data[9]=0:ba64000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0b93d000 ph data[10]=0:b93d000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0babe000 ph data[11]=0:babe000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bac7000 ph data[12]=0:bac7000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bc48000 ph data[13]=0:bc48000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0bb41000 ph data[14]=0:bb41000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:afc7a000 set TERM ph data[15]=0:afc7a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf120 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0ba93000 ph data[0]=0:ba93000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0ba44000 ph data[1]=0:ba44000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0b935000 ph data[2]=0:b935000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bad6000 ph data[3]=0:bad6000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bbc7000 ph data[4]=0:bbc7000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0bde8000 ph data[5]=0:bde8000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3f721000 ph data[6]=0:3f721000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:65f72000 ph data[7]=0:65f72000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0bb6b000 ph data[8]=0:bb6b000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bb1c000 ph data[9]=0:bb1c000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0bde5000 ph data[10]=0:bde5000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bb16000 ph data[11]=0:bb16000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bda7000 ph data[12]=0:bda7000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0c070000 ph data[13]=0:c070000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:38be9000 ph data[14]=0:38be9000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:65f82000 set TERM ph data[15]=0:65f82000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf120 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0bbd3000 ph data[0]=0:bbd3000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bc3c000 ph data[1]=0:bc3c000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:38b35000 ph data[2]=0:38b35000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bda6000 ph data[3]=0:bda6000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3f767000 ph data[4]=0:3f767000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0ba68000 ph data[5]=0:ba68000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0ba81000 ph data[6]=0:ba81000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0bbfa000 ph data[7]=0:bbfa000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0b913000 ph data[8]=0:b913000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3f794000 ph data[9]=0:3f794000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:afc85000 ph data[10]=0:afc85000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0ba1e000 ph data[11]=0:ba1e000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0b967000 ph data[12]=0:b967000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0b8c8000 ph data[13]=0:b8c8000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0ba89000 ph data[14]=0:ba89000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0b95a000 set TERM ph data[15]=0:b95a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeff4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf120 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0b91b000 ph data[0]=0:b91b000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0b9a4000 ph data[1]=0:b9a4000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:afc8d000 ph data[2]=0:afc8d000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afd5e000 ph data[3]=0:afd5e000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0b96f000 ph data[4]=0:b96f000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3f7f0000 ph data[5]=0:3f7f0000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0b8e9000 ph data[6]=0:b8e9000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0b962000 ph data[7]=0:b962000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b923000 ph data[8]=0:b923000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0b9ac000 ph data[9]=0:b9ac000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0ba35000 ph data[10]=0:ba35000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3f7e6000 ph data[11]=0:3f7e6000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b977000 ph data[12]=0:b977000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:3f728000 ph data[13]=0:3f728000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afe01000 set TERM ph data[14]=0:afe01000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeff4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 fixme:(dll/win32/comctl32/toolbar.c:5624) [000300DE] response 32959736 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) fixme:(dll/win32/comctl32/toolbar.c:5661) [000300DE] response 32959736 not handled to NM_CUSTOMDRAW (CDDS_POSTERASE) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960ea60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ea60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6bb0000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:afc6f000 ph data[0]=0:afc6f000 (fff) get Phys(data[n=1+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:0bb48000 ph data[1]=0:bb48000 (fff) get Phys(data[n=2+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:0b961000 ph data[2]=0:b961000 (fff) get Phys(data[n=3+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:0bf5a000 ph data[3]=0:bf5a000 (fff) get Phys(data[n=4+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:afe43000 ph data[4]=0:afe43000 (fff) get Phys(data[n=5+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:0b9b4000 ph data[5]=0:b9b4000 (fff) get Phys(data[n=6+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:0bf0d000 ph data[6]=0:bf0d000 (fff) get Phys(data[n=7+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:3f836000 ph data[7]=0:3f836000 (fff) get Phys(data[n=8+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:afc67000 ph data[8]=0:afc67000 (fff) get Phys(data[n=9+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:0c0d8000 ph data[9]=0:c0d8000 (fff) get Phys(data[n=10+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:0bad1000 ph data[10]=0:bad1000 (fff) get Phys(data[n=11+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:0ba72000 ph data[11]=0:ba72000 (fff) get Phys(data[n=12+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:afe3b000 ph data[12]=0:afe3b000 (fff) get Phys(data[n=13+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:3f73c000 ph data[13]=0:3f73c000 (fff) get Phys(data[n=14+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:afe35000 ph data[14]=0:afe35000 (fff) get Phys(data[n=15+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:0bae6000 set TERM ph data[15]=0:bae6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ea60, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960eae0, OrigWordsRequested 0xe00, DevSize 0xe IdeReadWrite (REQ): Starting sector is 3960eae0, Number of WORDS 0xe00, DevSize 0xe AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bc0000, count 1c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:0bb1f000 ph data[0]=0:bb1f000 (fff) get Phys(data[n=1+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:0c058000 set TERM ph data[1]=0:c058000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe6e4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960eae0, Count 0xe(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered e00, WordsLeft e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1c00, full size 1c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608e60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608e60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:7344c000 ph data[0]=0:7344c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:7344d000 ph data[0]=0:7344c000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:73446000 ph data[1]=0:73446000 (fff) get Phys(data[n=2+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:73447000 ph data[1]=0:73446000 (1fff) get Phys(data[n=2+2000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:73448000 ph data[1]=0:73446000 (2fff) get Phys(data[n=2+3000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:73449000 ph data[1]=0:73446000 (3fff) get Phys(data[n=2+4000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:7344a000 ph data[1]=0:73446000 (4fff) get Phys(data[n=2+5000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:7344b000 ph data[1]=0:73446000 (5fff) get Phys(data[n=2+6000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:73454000 ph data[2]=0:73454000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:73455000 ph data[2]=0:73454000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:7344e000 ph data[3]=0:7344e000 (fff) get Phys(data[n=4+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:7344f000 ph data[3]=0:7344e000 (1fff) get Phys(data[n=4+2000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:73450000 ph data[3]=0:7344e000 (2fff) get Phys(data[n=4+3000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:73451000 ph data[3]=0:7344e000 (3fff) get Phys(data[n=4+4000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:73452000 ph data[3]=0:7344e000 (4fff) get Phys(data[n=4+5000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:73453000 set TERM ph data[3]=0:7344e000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608e60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608ee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608ee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:7345c000 ph data[0]=0:7345c000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:7345d000 ph data[0]=0:7345c000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:73456000 ph data[1]=0:73456000 (fff) get Phys(data[n=2+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:73457000 ph data[1]=0:73456000 (1fff) get Phys(data[n=2+2000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:73458000 ph data[1]=0:73456000 (2fff) get Phys(data[n=2+3000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:73459000 ph data[1]=0:73456000 (3fff) get Phys(data[n=2+4000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:7345a000 ph data[1]=0:73456000 (4fff) get Phys(data[n=2+5000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:7345b000 ph data[1]=0:73456000 (5fff) get Phys(data[n=2+6000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:73464000 ph data[2]=0:73464000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:73465000 ph data[2]=0:73464000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:7345e000 ph data[3]=0:7345e000 (fff) get Phys(data[n=4+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:7345f000 ph data[3]=0:7345e000 (1fff) get Phys(data[n=4+2000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:73460000 ph data[3]=0:7345e000 (2fff) get Phys(data[n=4+3000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:73461000 ph data[3]=0:7345e000 (3fff) get Phys(data[n=4+4000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:73462000 ph data[3]=0:7345e000 (4fff) get Phys(data[n=4+5000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:73463000 set TERM ph data[3]=0:7345e000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608f60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608f60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:7346c000 ph data[0]=0:7346c000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:7346d000 ph data[0]=0:7346c000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:73466000 ph data[1]=0:73466000 (fff) get Phys(data[n=2+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:73467000 ph data[1]=0:73466000 (1fff) get Phys(data[n=2+2000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:73468000 ph data[1]=0:73466000 (2fff) get Phys(data[n=2+3000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:73469000 ph data[1]=0:73466000 (3fff) get Phys(data[n=2+4000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:7346a000 ph data[1]=0:73466000 (4fff) get Phys(data[n=2+5000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:7346b000 ph data[1]=0:73466000 (5fff) get Phys(data[n=2+6000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:73474000 ph data[2]=0:73474000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:73475000 ph data[2]=0:73474000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:7346e000 ph data[3]=0:7346e000 (fff) get Phys(data[n=4+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:7346f000 ph data[3]=0:7346e000 (1fff) get Phys(data[n=4+2000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:73470000 ph data[3]=0:7346e000 (2fff) get Phys(data[n=4+3000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:73471000 ph data[3]=0:7346e000 (3fff) get Phys(data[n=4+4000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:73472000 ph data[3]=0:7346e000 (4fff) get Phys(data[n=4+5000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:73473000 set TERM ph data[3]=0:7346e000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39608fe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39608fe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:7347c000 ph data[0]=0:7347c000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:7347d000 ph data[0]=0:7347c000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:73476000 ph data[1]=0:73476000 (fff) get Phys(data[n=2+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:73477000 ph data[1]=0:73476000 (1fff) get Phys(data[n=2+2000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:73478000 ph data[1]=0:73476000 (2fff) get Phys(data[n=2+3000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:73479000 ph data[1]=0:73476000 (3fff) get Phys(data[n=2+4000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:7347a000 ph data[1]=0:73476000 (4fff) get Phys(data[n=2+5000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:7347b000 ph data[1]=0:73476000 (5fff) get Phys(data[n=2+6000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:73484000 ph data[2]=0:73484000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:73485000 ph data[2]=0:73484000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:7347e000 ph data[3]=0:7347e000 (fff) get Phys(data[n=4+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:7347f000 ph data[3]=0:7347e000 (1fff) get Phys(data[n=4+2000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:73480000 ph data[3]=0:7347e000 (2fff) get Phys(data[n=4+3000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:73481000 ph data[3]=0:7347e000 (3fff) get Phys(data[n=4+4000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:73482000 ph data[3]=0:7347e000 (4fff) get Phys(data[n=4+5000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:73483000 set TERM ph data[3]=0:7347e000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608ee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608f60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39608fe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:71164000 ph data[0]=0:71164000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:71165000 ph data[0]=0:71164000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:71166000 ph data[0]=0:71164000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:71167000 ph data[0]=0:71164000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:71168000 ph data[0]=0:71164000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:71161000 ph data[1]=0:71161000 (fff) get Phys(data[n=2+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:71162000 ph data[1]=0:71161000 (1fff) get Phys(data[n=2+2000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:71163000 ph data[1]=0:71161000 (2fff) get Phys(data[n=2+3000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:7116c000 ph data[2]=0:7116c000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:7116d000 ph data[2]=0:7116c000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:7116e000 ph data[2]=0:7116c000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:7116f000 ph data[2]=0:7116c000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:71170000 ph data[2]=0:7116c000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:71169000 ph data[3]=0:71169000 (fff) get Phys(data[n=4+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:7116a000 ph data[3]=0:71169000 (1fff) get Phys(data[n=4+2000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:7116b000 set TERM ph data[3]=0:71169000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396090e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396090e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:71174000 ph data[0]=0:71174000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:71175000 ph data[0]=0:71174000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:71176000 ph data[0]=0:71174000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:71177000 ph data[0]=0:71174000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:71178000 ph data[0]=0:71174000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:71171000 ph data[1]=0:71171000 (fff) get Phys(data[n=2+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:71172000 ph data[1]=0:71171000 (1fff) get Phys(data[n=2+2000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:71173000 ph data[1]=0:71171000 (2fff) get Phys(data[n=2+3000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:7117c000 ph data[2]=0:7117c000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:7117d000 ph data[2]=0:7117c000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:7117e000 ph data[2]=0:7117c000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:7117f000 ph data[2]=0:7117c000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:71180000 ph data[2]=0:7117c000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:71179000 ph data[3]=0:71179000 (fff) get Phys(data[n=4+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:7117a000 ph data[3]=0:71179000 (1fff) get Phys(data[n=4+2000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:7117b000 set TERM ph data[3]=0:71179000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:71184000 ph data[0]=0:71184000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:71185000 ph data[0]=0:71184000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:71186000 ph data[0]=0:71184000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:71187000 ph data[0]=0:71184000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:71188000 ph data[0]=0:71184000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:71181000 ph data[1]=0:71181000 (fff) get Phys(data[n=2+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:71182000 ph data[1]=0:71181000 (1fff) get Phys(data[n=2+2000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:71183000 ph data[1]=0:71181000 (2fff) get Phys(data[n=2+3000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:7118c000 ph data[2]=0:7118c000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:7118d000 ph data[2]=0:7118c000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:7118e000 ph data[2]=0:7118c000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:7118f000 ph data[2]=0:7118c000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:71190000 ph data[2]=0:7118c000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:71189000 ph data[3]=0:71189000 (fff) get Phys(data[n=4+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:7118a000 ph data[3]=0:71189000 (1fff) get Phys(data[n=4+2000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:7118b000 set TERM ph data[3]=0:71189000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396090e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396091e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396091e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:71194000 ph data[0]=0:71194000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:71195000 ph data[0]=0:71194000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:71196000 ph data[0]=0:71194000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:71197000 ph data[0]=0:71194000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:71198000 ph data[0]=0:71194000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:71191000 ph data[1]=0:71191000 (fff) get Phys(data[n=2+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:71192000 ph data[1]=0:71191000 (1fff) get Phys(data[n=2+2000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:71193000 ph data[1]=0:71191000 (2fff) get Phys(data[n=2+3000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:7119c000 ph data[2]=0:7119c000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:7119d000 ph data[2]=0:7119c000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:7119e000 ph data[2]=0:7119c000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:7119f000 ph data[2]=0:7119c000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:711a0000 ph data[2]=0:7119c000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:71199000 ph data[3]=0:71199000 (fff) get Phys(data[n=4+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:7119a000 ph data[3]=0:71199000 (1fff) get Phys(data[n=4+2000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:7119b000 set TERM ph data[3]=0:71199000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609160, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396091e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:711a4000 ph data[0]=0:711a4000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:711a6000 ph data[1]=0:711a6000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:711a7000 ph data[1]=0:711a6000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:711a8000 ph data[1]=0:711a6000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:711a1000 ph data[2]=0:711a1000 (fff) get Phys(data[n=3+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:711a2000 ph data[2]=0:711a1000 (1fff) get Phys(data[n=3+2000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:711a3000 ph data[2]=0:711a1000 (2fff) get Phys(data[n=3+3000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:711ac000 ph data[3]=0:711ac000 (fff) get Phys(data[n=4+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:711ad000 ph data[3]=0:711ac000 (1fff) get Phys(data[n=4+2000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:711ae000 ph data[3]=0:711ac000 (2fff) get Phys(data[n=4+3000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:711af000 ph data[3]=0:711ac000 (3fff) get Phys(data[n=4+4000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:711b0000 ph data[3]=0:711ac000 (4fff) get Phys(data[n=4+5000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:711a9000 ph data[4]=0:711a9000 (fff) get Phys(data[n=5+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:711aa000 ph data[4]=0:711a9000 (1fff) get Phys(data[n=5+2000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:711ab000 ph data[4]=0:711a9000 (2fff) get Phys(data[n=5+3000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:711b4000 set TERM ph data[5]=0:711b4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609260, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x6, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396092e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396092e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:711b5000 ph data[0]=0:711b5000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:711b6000 ph data[0]=0:711b5000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:711b7000 ph data[0]=0:711b5000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:711b8000 ph data[0]=0:711b5000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:711b1000 ph data[1]=0:711b1000 (fff) get Phys(data[n=2+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:711b2000 ph data[1]=0:711b1000 (1fff) get Phys(data[n=2+2000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:711b3000 ph data[1]=0:711b1000 (2fff) get Phys(data[n=2+3000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:711bc000 ph data[2]=0:711bc000 (fff) get Phys(data[n=3+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:711bd000 ph data[2]=0:711bc000 (1fff) get Phys(data[n=3+2000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:711be000 ph data[2]=0:711bc000 (2fff) get Phys(data[n=3+3000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:711bf000 ph data[2]=0:711bc000 (3fff) get Phys(data[n=3+4000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:711c0000 ph data[2]=0:711bc000 (4fff) get Phys(data[n=3+5000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:711b9000 ph data[3]=0:711b9000 (fff) get Phys(data[n=4+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:711ba000 ph data[3]=0:711b9000 (1fff) get Phys(data[n=4+2000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:711bb000 ph data[3]=0:711b9000 (2fff) get Phys(data[n=4+3000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:711c4000 set TERM ph data[4]=0:711c4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609360, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609360, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:711c5000 ph data[0]=0:711c5000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:711c6000 ph data[0]=0:711c5000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:711c7000 ph data[0]=0:711c5000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:711c8000 ph data[0]=0:711c5000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:711c1000 ph data[1]=0:711c1000 (fff) get Phys(data[n=2+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:711c2000 ph data[1]=0:711c1000 (1fff) get Phys(data[n=2+2000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:711c3000 ph data[1]=0:711c1000 (2fff) get Phys(data[n=2+3000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:711cc000 ph data[2]=0:711cc000 (fff) get Phys(data[n=3+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:711cd000 ph data[2]=0:711cc000 (1fff) get Phys(data[n=3+2000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:711ce000 ph data[2]=0:711cc000 (2fff) get Phys(data[n=3+3000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:711cf000 ph data[2]=0:711cc000 (3fff) get Phys(data[n=3+4000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:711d0000 ph data[2]=0:711cc000 (4fff) get Phys(data[n=3+5000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:711c9000 ph data[3]=0:711c9000 (fff) get Phys(data[n=4+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:711ca000 ph data[3]=0:711c9000 (1fff) get Phys(data[n=4+2000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:711cb000 ph data[3]=0:711c9000 (2fff) get Phys(data[n=4+3000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:711d4000 set TERM ph data[4]=0:711d4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396092e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x5, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396093e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396093e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:711d5000 ph data[0]=0:711d5000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:711d6000 ph data[0]=0:711d5000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:711d7000 ph data[0]=0:711d5000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:711d8000 ph data[0]=0:711d5000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:711d1000 ph data[1]=0:711d1000 (fff) get Phys(data[n=2+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:711d2000 ph data[1]=0:711d1000 (1fff) get Phys(data[n=2+2000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:711d3000 ph data[1]=0:711d1000 (2fff) get Phys(data[n=2+3000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:711dc000 ph data[2]=0:711dc000 (fff) get Phys(data[n=3+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:711dd000 ph data[2]=0:711dc000 (1fff) get Phys(data[n=3+2000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:711de000 ph data[2]=0:711dc000 (2fff) get Phys(data[n=3+3000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:711df000 ph data[2]=0:711dc000 (3fff) get Phys(data[n=3+4000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:711e0000 ph data[2]=0:711dc000 (4fff) get Phys(data[n=3+5000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:711d9000 ph data[3]=0:711d9000 (fff) get Phys(data[n=4+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:711da000 ph data[3]=0:711d9000 (1fff) get Phys(data[n=4+2000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:711db000 ph data[3]=0:711d9000 (2fff) get Phys(data[n=4+3000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:711e4000 set TERM ph data[4]=0:711e4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55e4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609360, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x5, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396093e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x5, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:700c5000 ph data[0]=0:700c5000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:700c6000 ph data[0]=0:700c5000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:700c7000 ph data[0]=0:700c5000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:700c8000 ph data[0]=0:700c5000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:700c9000 ph data[0]=0:700c5000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:700ca000 ph data[0]=0:700c5000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:700c3000 ph data[1]=0:700c3000 (fff) get Phys(data[n=2+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:700c4000 ph data[1]=0:700c3000 (1fff) get Phys(data[n=2+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:700cd000 ph data[2]=0:700cd000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:700ce000 ph data[2]=0:700cd000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:700cf000 ph data[2]=0:700cd000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:700d0000 ph data[2]=0:700cd000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:700d1000 ph data[2]=0:700cd000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:700d2000 ph data[2]=0:700cd000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:700cb000 ph data[3]=0:700cb000 (fff) get Phys(data[n=4+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:700cc000 set TERM ph data[3]=0:700cb000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609460, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396094e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396094e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:700d5000 ph data[0]=0:700d5000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:700d6000 ph data[0]=0:700d5000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:700d7000 ph data[0]=0:700d5000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:700d8000 ph data[0]=0:700d5000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:700d9000 ph data[0]=0:700d5000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:700da000 ph data[0]=0:700d5000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:700d3000 ph data[1]=0:700d3000 (fff) get Phys(data[n=2+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:700d4000 ph data[1]=0:700d3000 (1fff) get Phys(data[n=2+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:700dd000 ph data[2]=0:700dd000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:700de000 ph data[2]=0:700dd000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:700df000 ph data[2]=0:700dd000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:700e0000 ph data[2]=0:700dd000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:700e1000 ph data[2]=0:700dd000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:700e2000 ph data[2]=0:700dd000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:700db000 ph data[3]=0:700db000 (fff) get Phys(data[n=4+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:700dc000 set TERM ph data[3]=0:700db000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b558c ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396094e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:700e5000 ph data[0]=0:700e5000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:700e6000 ph data[0]=0:700e5000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:700e7000 ph data[0]=0:700e5000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:700e8000 ph data[0]=0:700e5000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:700e9000 ph data[0]=0:700e5000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:700ea000 ph data[0]=0:700e5000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:700e3000 ph data[1]=0:700e3000 (fff) get Phys(data[n=2+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:700e4000 ph data[1]=0:700e3000 (1fff) get Phys(data[n=2+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:700ed000 ph data[2]=0:700ed000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:700ee000 ph data[2]=0:700ed000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:700ef000 ph data[2]=0:700ed000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:700f0000 ph data[2]=0:700ed000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:700f1000 ph data[2]=0:700ed000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:700f2000 ph data[2]=0:700ed000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:700eb000 ph data[3]=0:700eb000 (fff) get Phys(data[n=4+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:700ec000 set TERM ph data[3]=0:700eb000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396095e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396095e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:700f5000 ph data[0]=0:700f5000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:700f6000 ph data[0]=0:700f5000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:700f7000 ph data[0]=0:700f5000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:700f8000 ph data[0]=0:700f5000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:700f9000 ph data[0]=0:700f5000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:700fa000 ph data[0]=0:700f5000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:700f3000 ph data[1]=0:700f3000 (fff) get Phys(data[n=2+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:700f4000 ph data[1]=0:700f3000 (1fff) get Phys(data[n=2+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:700fd000 ph data[2]=0:700fd000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:700fe000 ph data[2]=0:700fd000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:700ff000 ph data[2]=0:700fd000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:70100000 ph data[2]=0:700fd000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:70101000 ph data[2]=0:700fd000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:70102000 ph data[2]=0:700fd000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:700fb000 ph data[3]=0:700fb000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:700fc000 set TERM ph data[3]=0:700fb000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609560, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396095e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:70105000 ph data[0]=0:70105000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:70106000 ph data[0]=0:70105000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:70107000 ph data[0]=0:70105000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:70108000 ph data[0]=0:70105000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:70109000 ph data[0]=0:70105000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:7010a000 ph data[0]=0:70105000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:70103000 ph data[1]=0:70103000 (fff) get Phys(data[n=2+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:70104000 ph data[1]=0:70103000 (1fff) get Phys(data[n=2+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:7010d000 ph data[2]=0:7010d000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:7010e000 ph data[2]=0:7010d000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:7010f000 ph data[2]=0:7010d000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:70110000 ph data[2]=0:7010d000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:70111000 ph data[2]=0:7010d000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:70112000 ph data[2]=0:7010d000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:7010b000 ph data[3]=0:7010b000 (fff) get Phys(data[n=4+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:7010c000 set TERM ph data[3]=0:7010b000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396096e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396096e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:70115000 ph data[0]=0:70115000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:70116000 ph data[0]=0:70115000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:70117000 ph data[0]=0:70115000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:70118000 ph data[0]=0:70115000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:70119000 ph data[0]=0:70115000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:7011a000 ph data[0]=0:70115000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:70113000 ph data[1]=0:70113000 (fff) get Phys(data[n=2+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:70114000 ph data[1]=0:70113000 (1fff) get Phys(data[n=2+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:7011d000 ph data[2]=0:7011d000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:7011e000 ph data[2]=0:7011d000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:7011f000 ph data[2]=0:7011d000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:70120000 ph data[2]=0:7011d000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:70121000 ph data[2]=0:7011d000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:70122000 ph data[2]=0:7011d000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:7011b000 ph data[3]=0:7011b000 (fff) get Phys(data[n=4+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:7011c000 set TERM ph data[3]=0:7011b000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396096e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:70125000 ph data[0]=0:70125000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:70126000 ph data[0]=0:70125000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:70127000 ph data[0]=0:70125000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:70128000 ph data[0]=0:70125000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:70129000 ph data[0]=0:70125000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:7012a000 ph data[0]=0:70125000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:70123000 ph data[1]=0:70123000 (fff) get Phys(data[n=2+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:70124000 ph data[1]=0:70123000 (1fff) get Phys(data[n=2+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:7012d000 ph data[2]=0:7012d000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:7012e000 ph data[2]=0:7012d000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:7012f000 ph data[2]=0:7012d000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:70130000 ph data[2]=0:7012d000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:70131000 ph data[2]=0:7012d000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:70132000 ph data[2]=0:7012d000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:7012b000 ph data[3]=0:7012b000 (fff) get Phys(data[n=4+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:7012c000 set TERM ph data[3]=0:7012b000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396097e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396097e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:70135000 ph data[0]=0:70135000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:70136000 ph data[0]=0:70135000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:70137000 ph data[0]=0:70135000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:70138000 ph data[0]=0:70135000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:70139000 ph data[0]=0:70135000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:7013a000 ph data[0]=0:70135000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:70133000 ph data[1]=0:70133000 (fff) get Phys(data[n=2+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:70134000 ph data[1]=0:70133000 (1fff) get Phys(data[n=2+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:7013d000 ph data[2]=0:7013d000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:7013e000 ph data[2]=0:7013d000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:7013f000 ph data[2]=0:7013d000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:70140000 ph data[2]=0:7013d000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:70141000 ph data[2]=0:7013d000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:70142000 ph data[2]=0:7013d000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:7013b000 ph data[3]=0:7013b000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:7013c000 set TERM ph data[3]=0:7013b000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396097e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:6aecd000 ph data[0]=0:6aecd000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:6aece000 ph data[0]=0:6aecd000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:6aecf000 ph data[0]=0:6aecd000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:6aed0000 ph data[0]=0:6aecd000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:6aed1000 ph data[0]=0:6aecd000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:6aeca000 ph data[1]=0:6aeca000 (fff) get Phys(data[n=2+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:6aecb000 ph data[1]=0:6aeca000 (1fff) get Phys(data[n=2+2000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:6aecc000 ph data[1]=0:6aeca000 (2fff) get Phys(data[n=2+3000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:6aed5000 ph data[2]=0:6aed5000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:6aed6000 ph data[2]=0:6aed5000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:6aed7000 ph data[2]=0:6aed5000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:6aed8000 ph data[2]=0:6aed5000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:6aed9000 ph data[2]=0:6aed5000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:6aed2000 ph data[3]=0:6aed2000 (fff) get Phys(data[n=4+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:6aed3000 ph data[3]=0:6aed2000 (1fff) get Phys(data[n=4+2000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:6aed4000 set TERM ph data[3]=0:6aed2000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396098e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396098e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:6aedd000 ph data[0]=0:6aedd000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:6aede000 ph data[0]=0:6aedd000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:6aedf000 ph data[0]=0:6aedd000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:6aee0000 ph data[0]=0:6aedd000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:6aee1000 ph data[0]=0:6aedd000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:6aeda000 ph data[1]=0:6aeda000 (fff) get Phys(data[n=2+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:6aedb000 ph data[1]=0:6aeda000 (1fff) get Phys(data[n=2+2000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:6aedc000 ph data[1]=0:6aeda000 (2fff) get Phys(data[n=2+3000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:6aee5000 ph data[2]=0:6aee5000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:6aee6000 ph data[2]=0:6aee5000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:6aee7000 ph data[2]=0:6aee5000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:6aee8000 ph data[2]=0:6aee5000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:6aee9000 ph data[2]=0:6aee5000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:6aee2000 ph data[3]=0:6aee2000 (fff) get Phys(data[n=4+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:6aee3000 ph data[3]=0:6aee2000 (1fff) get Phys(data[n=4+2000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:6aee4000 set TERM ph data[3]=0:6aee2000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:6aeed000 ph data[0]=0:6aeed000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:6aeee000 ph data[0]=0:6aeed000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:6aeef000 ph data[0]=0:6aeed000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:6aef0000 ph data[0]=0:6aeed000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:6aef1000 ph data[0]=0:6aeed000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:6aeea000 ph data[1]=0:6aeea000 (fff) get Phys(data[n=2+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:6aeeb000 ph data[1]=0:6aeea000 (1fff) get Phys(data[n=2+2000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:6aeec000 ph data[1]=0:6aeea000 (2fff) get Phys(data[n=2+3000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:6aef5000 ph data[2]=0:6aef5000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:6aef6000 ph data[2]=0:6aef5000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:6aef7000 ph data[2]=0:6aef5000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:6aef8000 ph data[2]=0:6aef5000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:6aef9000 ph data[2]=0:6aef5000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:6aef2000 ph data[3]=0:6aef2000 (fff) get Phys(data[n=4+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:6aef3000 ph data[3]=0:6aef2000 (1fff) get Phys(data[n=4+2000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:6aef4000 set TERM ph data[3]=0:6aef2000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396098e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 396099e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 396099e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:6aefd000 ph data[0]=0:6aefd000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:6aefe000 ph data[0]=0:6aefd000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:6aeff000 ph data[0]=0:6aefd000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:6af00000 ph data[0]=0:6aefd000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:6af01000 ph data[0]=0:6aefd000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:6aefa000 ph data[1]=0:6aefa000 (fff) get Phys(data[n=2+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:6aefb000 ph data[1]=0:6aefa000 (1fff) get Phys(data[n=2+2000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:6aefc000 ph data[1]=0:6aefa000 (2fff) get Phys(data[n=2+3000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:6af05000 ph data[2]=0:6af05000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:6af06000 ph data[2]=0:6af05000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:6af07000 ph data[2]=0:6af05000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:6af08000 ph data[2]=0:6af05000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:6af09000 ph data[2]=0:6af05000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:6af02000 ph data[3]=0:6af02000 (fff) get Phys(data[n=4+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:6af03000 ph data[3]=0:6af02000 (1fff) get Phys(data[n=4+2000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:6af04000 set TERM ph data[3]=0:6af02000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x396099e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609a60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609a60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:662da000 ph data[0]=0:662da000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:662cb000 ph data[1]=0:662cb000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:662cc000 ph data[1]=0:662cb000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:662cd000 ph data[1]=0:662cb000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:662ce000 ph data[1]=0:662cb000 (3fff) get Phys(data[n=2+4000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:662cf000 ph data[1]=0:662cb000 (4fff) get Phys(data[n=2+5000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:662d0000 ph data[1]=0:662cb000 (5fff) get Phys(data[n=2+6000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:662d9000 ph data[2]=0:662d9000 (fff) get Phys(data[n=3+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:662e2000 ph data[3]=0:662e2000 (fff) get Phys(data[n=4+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:662d3000 ph data[4]=0:662d3000 (fff) get Phys(data[n=5+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:662d4000 ph data[4]=0:662d3000 (1fff) get Phys(data[n=5+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:662d5000 ph data[4]=0:662d3000 (2fff) get Phys(data[n=5+3000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:662d6000 ph data[4]=0:662d3000 (3fff) get Phys(data[n=5+4000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:662d7000 ph data[4]=0:662d3000 (4fff) get Phys(data[n=5+5000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:662d8000 ph data[4]=0:662d3000 (5fff) get Phys(data[n=5+6000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:662e1000 set TERM ph data[5]=0:662e1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609a60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x6, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609ae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609ae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:662ea000 ph data[0]=0:662ea000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:662db000 ph data[1]=0:662db000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:662dc000 ph data[1]=0:662db000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:662dd000 ph data[1]=0:662db000 (2fff) get Phys(data[n=2+3000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:662de000 ph data[1]=0:662db000 (3fff) get Phys(data[n=2+4000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:662df000 ph data[1]=0:662db000 (4fff) get Phys(data[n=2+5000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:662e0000 ph data[1]=0:662db000 (5fff) get Phys(data[n=2+6000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:662e9000 ph data[2]=0:662e9000 (fff) get Phys(data[n=3+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:662f2000 ph data[3]=0:662f2000 (fff) get Phys(data[n=4+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:662e3000 ph data[4]=0:662e3000 (fff) get Phys(data[n=5+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:662e4000 ph data[4]=0:662e3000 (1fff) get Phys(data[n=5+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:662e5000 ph data[4]=0:662e3000 (2fff) get Phys(data[n=5+3000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:662e6000 ph data[4]=0:662e3000 (3fff) get Phys(data[n=5+4000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:662e7000 ph data[4]=0:662e3000 (4fff) get Phys(data[n=5+5000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:662e8000 ph data[4]=0:662e3000 (5fff) get Phys(data[n=5+6000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:662f1000 set TERM ph data[5]=0:662f1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609b60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609b60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:662fa000 ph data[0]=0:662fa000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:662eb000 ph data[1]=0:662eb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:662ec000 ph data[1]=0:662eb000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:662ed000 ph data[1]=0:662eb000 (2fff) get Phys(data[n=2+3000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:662ee000 ph data[1]=0:662eb000 (3fff) get Phys(data[n=2+4000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:662ef000 ph data[1]=0:662eb000 (4fff) get Phys(data[n=2+5000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:662f0000 ph data[1]=0:662eb000 (5fff) get Phys(data[n=2+6000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:662f9000 ph data[2]=0:662f9000 (fff) get Phys(data[n=3+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:66302000 ph data[3]=0:66302000 (fff) get Phys(data[n=4+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:662f3000 ph data[4]=0:662f3000 (fff) get Phys(data[n=5+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:662f4000 ph data[4]=0:662f3000 (1fff) get Phys(data[n=5+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:662f5000 ph data[4]=0:662f3000 (2fff) get Phys(data[n=5+3000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:662f6000 ph data[4]=0:662f3000 (3fff) get Phys(data[n=5+4000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:662f7000 ph data[4]=0:662f3000 (4fff) get Phys(data[n=5+5000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:662f8000 ph data[4]=0:662f3000 (5fff) get Phys(data[n=5+6000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:66301000 set TERM ph data[5]=0:66301000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609ae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x6, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609be0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609be0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:6630a000 ph data[0]=0:6630a000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:662fb000 ph data[1]=0:662fb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:662fc000 ph data[1]=0:662fb000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:662fd000 ph data[1]=0:662fb000 (2fff) get Phys(data[n=2+3000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:662fe000 ph data[1]=0:662fb000 (3fff) get Phys(data[n=2+4000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:662ff000 ph data[1]=0:662fb000 (4fff) get Phys(data[n=2+5000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:66300000 ph data[1]=0:662fb000 (5fff) get Phys(data[n=2+6000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:66309000 ph data[2]=0:66309000 (fff) get Phys(data[n=3+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:66312000 ph data[3]=0:66312000 (fff) get Phys(data[n=4+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:66303000 ph data[4]=0:66303000 (fff) get Phys(data[n=5+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:66304000 ph data[4]=0:66303000 (1fff) get Phys(data[n=5+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:66305000 ph data[4]=0:66303000 (2fff) get Phys(data[n=5+3000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:66306000 ph data[4]=0:66303000 (3fff) get Phys(data[n=5+4000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:66307000 ph data[4]=0:66303000 (4fff) get Phys(data[n=5+5000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:66308000 ph data[4]=0:66303000 (5fff) get Phys(data[n=5+6000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:66311000 set TERM ph data[5]=0:66311000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609b60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x6, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609be0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x6, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960ec60, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3960ec60, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bb37000 set TERM ph data[0]=0:bb37000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ec60, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609c60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609c60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:62533000 ph data[0]=0:62533000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:6253c000 ph data[1]=0:6253c000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:6253d000 ph data[1]=0:6253c000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:6253e000 ph data[1]=0:6253c000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:62537000 ph data[2]=0:62537000 (fff) get Phys(data[n=3+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:62538000 ph data[2]=0:62537000 (1fff) get Phys(data[n=3+2000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:62539000 ph data[2]=0:62537000 (2fff) get Phys(data[n=3+3000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:62542000 ph data[3]=0:62542000 (fff) get Phys(data[n=4+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:6253b000 ph data[4]=0:6253b000 (fff) get Phys(data[n=5+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:62544000 ph data[5]=0:62544000 (fff) get Phys(data[n=6+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:62545000 ph data[5]=0:62544000 (1fff) get Phys(data[n=6+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:62546000 ph data[5]=0:62544000 (2fff) get Phys(data[n=6+3000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:6253f000 ph data[6]=0:6253f000 (fff) get Phys(data[n=7+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:62540000 ph data[6]=0:6253f000 (1fff) get Phys(data[n=7+2000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:62541000 ph data[6]=0:6253f000 (2fff) get Phys(data[n=7+3000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:6254a000 set TERM ph data[7]=0:6254a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609c60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x8, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609ce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609ce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:62543000 ph data[0]=0:62543000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:6254c000 ph data[1]=0:6254c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:6254d000 ph data[1]=0:6254c000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:6254e000 ph data[1]=0:6254c000 (2fff) get Phys(data[n=2+3000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:62547000 ph data[2]=0:62547000 (fff) get Phys(data[n=3+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:62548000 ph data[2]=0:62547000 (1fff) get Phys(data[n=3+2000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:62549000 ph data[2]=0:62547000 (2fff) get Phys(data[n=3+3000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:62552000 ph data[3]=0:62552000 (fff) get Phys(data[n=4+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:6254b000 ph data[4]=0:6254b000 (fff) get Phys(data[n=5+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:62554000 ph data[5]=0:62554000 (fff) get Phys(data[n=6+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:62555000 ph data[5]=0:62554000 (1fff) get Phys(data[n=6+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:62556000 ph data[5]=0:62554000 (2fff) get Phys(data[n=6+3000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:6254f000 ph data[6]=0:6254f000 (fff) get Phys(data[n=7+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:62550000 ph data[6]=0:6254f000 (1fff) get Phys(data[n=7+2000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:62551000 ph data[6]=0:6254f000 (2fff) get Phys(data[n=7+3000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:6255a000 set TERM ph data[7]=0:6255a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b558c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609ce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609d60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609d60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:62553000 ph data[0]=0:62553000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:6255c000 ph data[1]=0:6255c000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:6255d000 ph data[1]=0:6255c000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:6255e000 ph data[1]=0:6255c000 (2fff) get Phys(data[n=2+3000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:62557000 ph data[2]=0:62557000 (fff) get Phys(data[n=3+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:62558000 ph data[2]=0:62557000 (1fff) get Phys(data[n=3+2000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:62559000 ph data[2]=0:62557000 (2fff) get Phys(data[n=3+3000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:62562000 ph data[3]=0:62562000 (fff) get Phys(data[n=4+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:6255b000 ph data[4]=0:6255b000 (fff) get Phys(data[n=5+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:62564000 ph data[5]=0:62564000 (fff) get Phys(data[n=6+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:62565000 ph data[5]=0:62564000 (1fff) get Phys(data[n=6+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:62566000 ph data[5]=0:62564000 (2fff) get Phys(data[n=6+3000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:6255f000 ph data[6]=0:6255f000 (fff) get Phys(data[n=7+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:62560000 ph data[6]=0:6255f000 (1fff) get Phys(data[n=7+2000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:62561000 ph data[6]=0:6255f000 (2fff) get Phys(data[n=7+3000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:6256a000 set TERM ph data[7]=0:6256a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609d60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x8, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609de0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609de0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:62563000 ph data[0]=0:62563000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:6256c000 ph data[1]=0:6256c000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:6256d000 ph data[1]=0:6256c000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:6256e000 ph data[1]=0:6256c000 (2fff) get Phys(data[n=2+3000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:62567000 ph data[2]=0:62567000 (fff) get Phys(data[n=3+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:62568000 ph data[2]=0:62567000 (1fff) get Phys(data[n=3+2000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:62569000 ph data[2]=0:62567000 (2fff) get Phys(data[n=3+3000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:62572000 ph data[3]=0:62572000 (fff) get Phys(data[n=4+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:6256b000 ph data[4]=0:6256b000 (fff) get Phys(data[n=5+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:62574000 ph data[5]=0:62574000 (fff) get Phys(data[n=6+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:62575000 ph data[5]=0:62574000 (1fff) get Phys(data[n=6+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:62576000 ph data[5]=0:62574000 (2fff) get Phys(data[n=6+3000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:6256f000 ph data[6]=0:6256f000 (fff) get Phys(data[n=7+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:62570000 ph data[6]=0:6256f000 (1fff) get Phys(data[n=7+2000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:62571000 ph data[6]=0:6256f000 (2fff) get Phys(data[n=7+3000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:6257a000 set TERM ph data[7]=0:6257a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609de0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609e60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609e60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:5e55e000 ph data[0]=0:5e55e000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:5e55f000 ph data[0]=0:5e55e000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:5e560000 ph data[0]=0:5e55e000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:5e561000 ph data[0]=0:5e55e000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:5e562000 ph data[0]=0:5e55e000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:5e563000 ph data[0]=0:5e55e000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:5e564000 ph data[0]=0:5e55e000 (6fff) get Phys(data[n=1+7000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:5e565000 ph data[0]=0:5e55e000 (7fff) get Phys(data[n=1+8000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:5e566000 ph data[0]=0:5e55e000 (8fff) get Phys(data[n=1+9000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:5e567000 ph data[0]=0:5e55e000 (9fff) get Phys(data[n=1+a000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:5e568000 ph data[0]=0:5e55e000 (afff) get Phys(data[n=1+b000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:5e569000 ph data[0]=0:5e55e000 (bfff) get Phys(data[n=1+c000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:5e56a000 ph data[0]=0:5e55e000 (cfff) get Phys(data[n=1+d000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:5e56b000 ph data[0]=0:5e55e000 (dfff) get Phys(data[n=1+e000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:5e56c000 ph data[0]=0:5e55e000 (efff) get Phys(data[n=1+f000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:5e56d000 set TERM ph data[0]=0:5e55e000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609e60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609ee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609ee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:5e56e000 ph data[0]=0:5e56e000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:5e56f000 ph data[0]=0:5e56e000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:5e570000 ph data[0]=0:5e56e000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:5e571000 ph data[0]=0:5e56e000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:5e572000 ph data[0]=0:5e56e000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:5e573000 ph data[0]=0:5e56e000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:5e574000 ph data[0]=0:5e56e000 (6fff) get Phys(data[n=1+7000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:5e575000 ph data[0]=0:5e56e000 (7fff) get Phys(data[n=1+8000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:5e576000 ph data[0]=0:5e56e000 (8fff) get Phys(data[n=1+9000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:5e577000 ph data[0]=0:5e56e000 (9fff) get Phys(data[n=1+a000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:5e578000 ph data[0]=0:5e56e000 (afff) get Phys(data[n=1+b000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:5e579000 ph data[0]=0:5e56e000 (bfff) get Phys(data[n=1+c000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:5e57a000 ph data[0]=0:5e56e000 (cfff) get Phys(data[n=1+d000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:5e57b000 ph data[0]=0:5e56e000 (dfff) get Phys(data[n=1+e000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:5e57c000 ph data[0]=0:5e56e000 (efff) get Phys(data[n=1+f000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:5e57d000 set TERM ph data[0]=0:5e56e000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609ee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609f60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609f60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:5e57e000 ph data[0]=0:5e57e000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:5e57f000 ph data[0]=0:5e57e000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:5e580000 ph data[0]=0:5e57e000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:5e581000 ph data[0]=0:5e57e000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:5e582000 ph data[0]=0:5e57e000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:5e583000 ph data[0]=0:5e57e000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:5e584000 ph data[0]=0:5e57e000 (6fff) get Phys(data[n=1+7000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:5e585000 ph data[0]=0:5e57e000 (7fff) get Phys(data[n=1+8000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:5e586000 ph data[0]=0:5e57e000 (8fff) get Phys(data[n=1+9000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:5e587000 ph data[0]=0:5e57e000 (9fff) get Phys(data[n=1+a000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:5e588000 ph data[0]=0:5e57e000 (afff) get Phys(data[n=1+b000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:5e589000 ph data[0]=0:5e57e000 (bfff) get Phys(data[n=1+c000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:5e58a000 ph data[0]=0:5e57e000 (cfff) get Phys(data[n=1+d000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:5e58b000 ph data[0]=0:5e57e000 (dfff) get Phys(data[n=1+e000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:5e58c000 ph data[0]=0:5e57e000 (efff) get Phys(data[n=1+f000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:5e58d000 set TERM ph data[0]=0:5e57e000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609f60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39609fe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39609fe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:5e58e000 ph data[0]=0:5e58e000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:5e58f000 ph data[0]=0:5e58e000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:5e590000 ph data[0]=0:5e58e000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:5e591000 ph data[0]=0:5e58e000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:5e592000 ph data[0]=0:5e58e000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:5e593000 ph data[0]=0:5e58e000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:5e594000 ph data[0]=0:5e58e000 (6fff) get Phys(data[n=1+7000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:5e595000 ph data[0]=0:5e58e000 (7fff) get Phys(data[n=1+8000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:5e596000 ph data[0]=0:5e58e000 (8fff) get Phys(data[n=1+9000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:5e597000 ph data[0]=0:5e58e000 (9fff) get Phys(data[n=1+a000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:5e598000 ph data[0]=0:5e58e000 (afff) get Phys(data[n=1+b000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:5e599000 ph data[0]=0:5e58e000 (bfff) get Phys(data[n=1+c000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:5e59a000 ph data[0]=0:5e58e000 (cfff) get Phys(data[n=1+d000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:5e59b000 ph data[0]=0:5e58e000 (dfff) get Phys(data[n=1+e000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:5e59c000 ph data[0]=0:5e58e000 (efff) get Phys(data[n=1+f000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:5e59d000 set TERM ph data[0]=0:5e58e000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39609fe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:53644000 ph data[0]=0:53644000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:53645000 ph data[0]=0:53644000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:53646000 ph data[0]=0:53644000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:53647000 ph data[0]=0:53644000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:53648000 ph data[0]=0:53644000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:53649000 ph data[0]=0:53644000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:53642000 ph data[1]=0:53642000 (fff) get Phys(data[n=2+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:53643000 ph data[1]=0:53642000 (1fff) get Phys(data[n=2+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:5364c000 ph data[2]=0:5364c000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:5364d000 ph data[2]=0:5364c000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:5364e000 ph data[2]=0:5364c000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:5364f000 ph data[2]=0:5364c000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:53650000 ph data[2]=0:5364c000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:53651000 ph data[2]=0:5364c000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:5364a000 ph data[3]=0:5364a000 (fff) get Phys(data[n=4+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:5364b000 set TERM ph data[3]=0:5364a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a0e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a0e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:53654000 ph data[0]=0:53654000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:53655000 ph data[0]=0:53654000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:53656000 ph data[0]=0:53654000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:53657000 ph data[0]=0:53654000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:53658000 ph data[0]=0:53654000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:53659000 ph data[0]=0:53654000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:53652000 ph data[1]=0:53652000 (fff) get Phys(data[n=2+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:53653000 ph data[1]=0:53652000 (1fff) get Phys(data[n=2+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:5365c000 ph data[2]=0:5365c000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:5365d000 ph data[2]=0:5365c000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:5365e000 ph data[2]=0:5365c000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:5365f000 ph data[2]=0:5365c000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:53660000 ph data[2]=0:5365c000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:53661000 ph data[2]=0:5365c000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:5365a000 ph data[3]=0:5365a000 (fff) get Phys(data[n=4+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:5365b000 set TERM ph data[3]=0:5365a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a0e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:53664000 ph data[0]=0:53664000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:53665000 ph data[0]=0:53664000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:53666000 ph data[0]=0:53664000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:53667000 ph data[0]=0:53664000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:53668000 ph data[0]=0:53664000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:53669000 ph data[0]=0:53664000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:53662000 ph data[1]=0:53662000 (fff) get Phys(data[n=2+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:53663000 ph data[1]=0:53662000 (1fff) get Phys(data[n=2+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:5366c000 ph data[2]=0:5366c000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:5366d000 ph data[2]=0:5366c000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:5366e000 ph data[2]=0:5366c000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:5366f000 ph data[2]=0:5366c000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:53670000 ph data[2]=0:5366c000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:53671000 ph data[2]=0:5366c000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:5366a000 ph data[3]=0:5366a000 (fff) get Phys(data[n=4+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:5366b000 set TERM ph data[3]=0:5366a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a160, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a1e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a1e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:53674000 ph data[0]=0:53674000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:53675000 ph data[0]=0:53674000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:53676000 ph data[0]=0:53674000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:53677000 ph data[0]=0:53674000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:53678000 ph data[0]=0:53674000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:53679000 ph data[0]=0:53674000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:53672000 ph data[1]=0:53672000 (fff) get Phys(data[n=2+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:53673000 ph data[1]=0:53672000 (1fff) get Phys(data[n=2+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:5367c000 ph data[2]=0:5367c000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:5367d000 ph data[2]=0:5367c000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:5367e000 ph data[2]=0:5367c000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:5367f000 ph data[2]=0:5367c000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:53680000 ph data[2]=0:5367c000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:53681000 ph data[2]=0:5367c000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:5367a000 ph data[3]=0:5367a000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:5367b000 set TERM ph data[3]=0:5367a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a1e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:53684000 ph data[0]=0:53684000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:53685000 ph data[0]=0:53684000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:53686000 ph data[0]=0:53684000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:53687000 ph data[0]=0:53684000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:53688000 ph data[0]=0:53684000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:53689000 ph data[0]=0:53684000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:53682000 ph data[1]=0:53682000 (fff) get Phys(data[n=2+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:53683000 ph data[1]=0:53682000 (1fff) get Phys(data[n=2+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:5368c000 ph data[2]=0:5368c000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:5368d000 ph data[2]=0:5368c000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:5368e000 ph data[2]=0:5368c000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:5368f000 ph data[2]=0:5368c000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:53690000 ph data[2]=0:5368c000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:53691000 ph data[2]=0:5368c000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:5368a000 ph data[3]=0:5368a000 (fff) get Phys(data[n=4+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:5368b000 set TERM ph data[3]=0:5368a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a260, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a2e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a2e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:53694000 ph data[0]=0:53694000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:53695000 ph data[0]=0:53694000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:53696000 ph data[0]=0:53694000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:53697000 ph data[0]=0:53694000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:53698000 ph data[0]=0:53694000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:53699000 ph data[0]=0:53694000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:53692000 ph data[1]=0:53692000 (fff) get Phys(data[n=2+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:53693000 ph data[1]=0:53692000 (1fff) get Phys(data[n=2+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:5369c000 ph data[2]=0:5369c000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:5369d000 ph data[2]=0:5369c000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:5369e000 ph data[2]=0:5369c000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:5369f000 ph data[2]=0:5369c000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:536a0000 ph data[2]=0:5369c000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:536a1000 ph data[2]=0:5369c000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:5369a000 ph data[3]=0:5369a000 (fff) get Phys(data[n=4+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:5369b000 set TERM ph data[3]=0:5369a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a2e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a360, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a360, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:536a4000 ph data[0]=0:536a4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:536a5000 ph data[0]=0:536a4000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:536a6000 ph data[0]=0:536a4000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:536a7000 ph data[0]=0:536a4000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:536a8000 ph data[0]=0:536a4000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:536a9000 ph data[0]=0:536a4000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:536a2000 ph data[1]=0:536a2000 (fff) get Phys(data[n=2+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:536a3000 ph data[1]=0:536a2000 (1fff) get Phys(data[n=2+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:536ac000 ph data[2]=0:536ac000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:536ad000 ph data[2]=0:536ac000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:536ae000 ph data[2]=0:536ac000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:536af000 ph data[2]=0:536ac000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:536b0000 ph data[2]=0:536ac000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:536b1000 ph data[2]=0:536ac000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:536aa000 ph data[3]=0:536aa000 (fff) get Phys(data[n=4+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:536ab000 set TERM ph data[3]=0:536aa000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a3e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a3e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:536b4000 ph data[0]=0:536b4000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:536b5000 ph data[0]=0:536b4000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:536b6000 ph data[0]=0:536b4000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:536b7000 ph data[0]=0:536b4000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:536b8000 ph data[0]=0:536b4000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:536b9000 ph data[0]=0:536b4000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:536b2000 ph data[1]=0:536b2000 (fff) get Phys(data[n=2+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:536b3000 ph data[1]=0:536b2000 (1fff) get Phys(data[n=2+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:536bc000 ph data[2]=0:536bc000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:536bd000 ph data[2]=0:536bc000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:536be000 ph data[2]=0:536bc000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:536bf000 ph data[2]=0:536bc000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:536c0000 ph data[2]=0:536bc000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:536c1000 ph data[2]=0:536bc000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:536ba000 ph data[3]=0:536ba000 (fff) get Phys(data[n=4+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:536bb000 set TERM ph data[3]=0:536ba000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9fad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a360, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c116e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a3e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x4, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3fe06000 ph data[0]=0:3fe06000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:3fe07000 ph data[0]=0:3fe06000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3fe08000 ph data[0]=0:3fe06000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:3fe09000 ph data[0]=0:3fe06000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3fe0a000 ph data[0]=0:3fe06000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:3fe0b000 ph data[0]=0:3fe06000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3fe0c000 ph data[0]=0:3fe06000 (6fff) get Phys(data[n=1+7000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:3fe0d000 ph data[0]=0:3fe06000 (7fff) get Phys(data[n=1+8000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:3fe0e000 ph data[0]=0:3fe06000 (8fff) get Phys(data[n=1+9000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3fe0f000 ph data[0]=0:3fe06000 (9fff) get Phys(data[n=1+a000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3fe10000 ph data[0]=0:3fe06000 (afff) get Phys(data[n=1+b000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:3fe11000 ph data[0]=0:3fe06000 (bfff) get Phys(data[n=1+c000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3fe12000 ph data[0]=0:3fe06000 (cfff) get Phys(data[n=1+d000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:3fe13000 ph data[0]=0:3fe06000 (dfff) get Phys(data[n=1+e000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3fe14000 ph data[0]=0:3fe06000 (efff) get Phys(data[n=1+f000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3fe55000 set TERM ph data[1]=0:3fe55000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a460, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x2, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a4e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a4e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3fe56000 ph data[0]=0:3fe56000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3fe57000 ph data[0]=0:3fe56000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3fe58000 ph data[0]=0:3fe56000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:3fe59000 ph data[0]=0:3fe56000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3fe5a000 ph data[0]=0:3fe56000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3fe5b000 ph data[0]=0:3fe56000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3fe5c000 ph data[0]=0:3fe56000 (6fff) get Phys(data[n=1+7000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:3fe5d000 ph data[0]=0:3fe56000 (7fff) get Phys(data[n=1+8000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3fe5e000 ph data[0]=0:3fe56000 (8fff) get Phys(data[n=1+9000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3fe5f000 ph data[0]=0:3fe56000 (9fff) get Phys(data[n=1+a000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3fe60000 ph data[0]=0:3fe56000 (afff) get Phys(data[n=1+b000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3fe61000 ph data[0]=0:3fe56000 (bfff) get Phys(data[n=1+c000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3fe62000 ph data[0]=0:3fe56000 (cfff) get Phys(data[n=1+d000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3fe63000 ph data[0]=0:3fe56000 (dfff) get Phys(data[n=1+e000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3fe64000 ph data[0]=0:3fe56000 (efff) get Phys(data[n=1+f000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3fe65000 set TERM ph data[0]=0:3fe56000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a4e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3fe66000 ph data[0]=0:3fe66000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3fe67000 ph data[0]=0:3fe66000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3fe68000 ph data[0]=0:3fe66000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:3fe69000 ph data[0]=0:3fe66000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3fe6a000 ph data[0]=0:3fe66000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3fe6b000 ph data[0]=0:3fe66000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:3fe6c000 ph data[0]=0:3fe66000 (6fff) get Phys(data[n=1+7000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3fe6d000 ph data[0]=0:3fe66000 (7fff) get Phys(data[n=1+8000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3fe6e000 ph data[0]=0:3fe66000 (8fff) get Phys(data[n=1+9000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3fe6f000 ph data[0]=0:3fe66000 (9fff) get Phys(data[n=1+a000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:3fe70000 ph data[0]=0:3fe66000 (afff) get Phys(data[n=1+b000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3fe71000 ph data[0]=0:3fe66000 (bfff) get Phys(data[n=1+c000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3fe72000 ph data[0]=0:3fe66000 (cfff) get Phys(data[n=1+d000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3fe73000 ph data[0]=0:3fe66000 (dfff) get Phys(data[n=1+e000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3fe74000 ph data[0]=0:3fe66000 (efff) get Phys(data[n=1+f000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3fe75000 set TERM ph data[0]=0:3fe66000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a560, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x1, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a5e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a5e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3fe76000 ph data[0]=0:3fe76000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:3fe77000 ph data[0]=0:3fe76000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:3fe78000 ph data[0]=0:3fe76000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3fe79000 ph data[0]=0:3fe76000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3fe7a000 ph data[0]=0:3fe76000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3fe7b000 ph data[0]=0:3fe76000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3fe7c000 ph data[0]=0:3fe76000 (6fff) get Phys(data[n=1+7000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:3fe7d000 ph data[0]=0:3fe76000 (7fff) get Phys(data[n=1+8000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:3fe7e000 ph data[0]=0:3fe76000 (8fff) get Phys(data[n=1+9000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:3fe7f000 ph data[0]=0:3fe76000 (9fff) get Phys(data[n=1+a000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:3fe80000 ph data[0]=0:3fe76000 (afff) get Phys(data[n=1+b000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3fe81000 ph data[0]=0:3fe76000 (bfff) get Phys(data[n=1+c000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3fe82000 ph data[0]=0:3fe76000 (cfff) get Phys(data[n=1+d000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:3fe83000 ph data[0]=0:3fe76000 (dfff) get Phys(data[n=1+e000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3fe84000 ph data[0]=0:3fe76000 (efff) get Phys(data[n=1+f000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:3fe85000 set TERM ph data[0]=0:3fe76000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a5e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3fe86000 ph data[0]=0:3fe86000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:3fe87000 ph data[0]=0:3fe86000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3fe88000 ph data[0]=0:3fe86000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:3fe89000 ph data[0]=0:3fe86000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3fe8a000 ph data[0]=0:3fe86000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:3fe8b000 ph data[0]=0:3fe86000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3fe8c000 ph data[0]=0:3fe86000 (6fff) get Phys(data[n=1+7000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:3fe8d000 ph data[0]=0:3fe86000 (7fff) get Phys(data[n=1+8000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:3fe8e000 ph data[0]=0:3fe86000 (8fff) get Phys(data[n=1+9000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3fe8f000 ph data[0]=0:3fe86000 (9fff) get Phys(data[n=1+a000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3fe90000 ph data[0]=0:3fe86000 (afff) get Phys(data[n=1+b000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:3fe91000 ph data[0]=0:3fe86000 (bfff) get Phys(data[n=1+c000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3fe92000 ph data[0]=0:3fe86000 (cfff) get Phys(data[n=1+d000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:3fe93000 ph data[0]=0:3fe86000 (dfff) get Phys(data[n=1+e000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3fe94000 ph data[0]=0:3fe86000 (efff) get Phys(data[n=1+f000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3fe95000 set TERM ph data[0]=0:3fe86000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3fe96000 ph data[0]=0:3fe96000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3fe97000 ph data[0]=0:3fe96000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3fe98000 ph data[0]=0:3fe96000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:3fe99000 ph data[0]=0:3fe96000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3fe9a000 ph data[0]=0:3fe96000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3fe9b000 ph data[0]=0:3fe96000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3fe9c000 ph data[0]=0:3fe96000 (6fff) get Phys(data[n=1+7000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:3fe9d000 ph data[0]=0:3fe96000 (7fff) get Phys(data[n=1+8000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3fe9e000 ph data[0]=0:3fe96000 (8fff) get Phys(data[n=1+9000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3fe9f000 ph data[0]=0:3fe96000 (9fff) get Phys(data[n=1+a000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3fea0000 ph data[0]=0:3fe96000 (afff) get Phys(data[n=1+b000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3fea1000 ph data[0]=0:3fe96000 (bfff) get Phys(data[n=1+c000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3fea2000 ph data[0]=0:3fe96000 (cfff) get Phys(data[n=1+d000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3fea3000 ph data[0]=0:3fe96000 (dfff) get Phys(data[n=1+e000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3fea4000 ph data[0]=0:3fe96000 (efff) get Phys(data[n=1+f000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3fea5000 set TERM ph data[0]=0:3fe96000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3fea6000 ph data[0]=0:3fea6000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3fea7000 ph data[0]=0:3fea6000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3fea8000 ph data[0]=0:3fea6000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:3fea9000 ph data[0]=0:3fea6000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3feaa000 ph data[0]=0:3fea6000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3feab000 ph data[0]=0:3fea6000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:3feac000 ph data[0]=0:3fea6000 (6fff) get Phys(data[n=1+7000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3fead000 ph data[0]=0:3fea6000 (7fff) get Phys(data[n=1+8000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3feae000 ph data[0]=0:3fea6000 (8fff) get Phys(data[n=1+9000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3feaf000 ph data[0]=0:3fea6000 (9fff) get Phys(data[n=1+a000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:3feb0000 ph data[0]=0:3fea6000 (afff) get Phys(data[n=1+b000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3feb1000 ph data[0]=0:3fea6000 (bfff) get Phys(data[n=1+c000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3feb2000 ph data[0]=0:3fea6000 (cfff) get Phys(data[n=1+d000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3feb3000 ph data[0]=0:3fea6000 (dfff) get Phys(data[n=1+e000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3feb4000 ph data[0]=0:3fea6000 (efff) get Phys(data[n=1+f000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3feb5000 set TERM ph data[0]=0:3fea6000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a6e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x1, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a7e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a7e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3feb6000 ph data[0]=0:3feb6000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:3feb7000 ph data[0]=0:3feb6000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:3feb8000 ph data[0]=0:3feb6000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3feb9000 ph data[0]=0:3feb6000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3feba000 ph data[0]=0:3feb6000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3febb000 ph data[0]=0:3feb6000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3febc000 ph data[0]=0:3feb6000 (6fff) get Phys(data[n=1+7000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:3febd000 ph data[0]=0:3feb6000 (7fff) get Phys(data[n=1+8000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:3febe000 ph data[0]=0:3feb6000 (8fff) get Phys(data[n=1+9000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:3febf000 ph data[0]=0:3feb6000 (9fff) get Phys(data[n=1+a000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:3fec0000 ph data[0]=0:3feb6000 (afff) get Phys(data[n=1+b000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3fec1000 ph data[0]=0:3feb6000 (bfff) get Phys(data[n=1+c000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3fec2000 ph data[0]=0:3feb6000 (cfff) get Phys(data[n=1+d000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:3fec3000 ph data[0]=0:3feb6000 (dfff) get Phys(data[n=1+e000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3fec4000 ph data[0]=0:3feb6000 (efff) get Phys(data[n=1+f000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:3fec5000 set TERM ph data[0]=0:3feb6000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b9b940 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a7e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b fixme:(dll/win32/comctl32/toolbar.c:5624) [000300DE] response 2084289656 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) fixme:(dll/win32/comctl32/toolbar.c:5661) [000300DE] response 2084289656 not handled to NM_CUSTOMDRAW (CDDS_POSTERASE) (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b err:(dll/win32/shell32/CDefaultContextMenu.cpp:389) IShellExtInit::Initialize failed.clsid {2690b74f-f353-422d-bb12-401581eef8f1} hr 0x80004005 WARNING: NtUserLockWindowUpdate at win32ss/user/ntuser/ntstubs.c:950 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb04 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bc33000 ph data[0]=0:bc33000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0ba54000 set TERM ph data[1]=0:ba54000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe6b8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:1227e000 ph data[0]=0:1227e000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bba7000 set TERM ph data[1]=0:bba7000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95810, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95810, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bda6000 ph data[0]=0:bda6000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bda7000 set TERM ph data[0]=0:bda6000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95810, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95810, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95810, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bc3f000 ph data[0]=0:bc3f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bae0000 set TERM ph data[1]=0:bae0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95810, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95810, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95810, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bb6f000 ph data[0]=0:bb6f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0baf8000 set TERM ph data[1]=0:baf8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95810, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95810, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95810, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0ba67000 ph data[0]=0:ba67000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0c000000 set TERM ph data[1]=0:c000000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95810, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95810, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95810, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0ba87000 ph data[0]=0:ba87000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0ba28000 set TERM ph data[1]=0:ba28000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95810, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95810, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95810, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0b9ff000 ph data[0]=0:b9ff000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bbb8000 set TERM ph data[1]=0:bbb8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95810, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95810, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95810, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0b9bf000 ph data[0]=0:b9bf000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:afdf0000 set TERM ph data[1]=0:afdf0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95810, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95810, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95810, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0b8ff000 ph data[0]=0:b8ff000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bee0000 set TERM ph data[1]=0:bee0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95810, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:00651000 ph data[0]=0:651000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bee2000 set TERM ph data[1]=0:bee2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbee5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e87a0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 395e87a0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0be61000 set TERM ph data[0]=0:be61000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e87a0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bea1000 ph data[0]=0:bea1000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0be5a000 set TERM ph data[1]=0:be5a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0be51000 ph data[0]=0:be51000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bc4a000 set TERM ph data[1]=0:bc4a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0baa1000 ph data[0]=0:baa1000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bdd2000 set TERM ph data[1]=0:bdd2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:00119000 ph data[0]=0:119000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0b9ca000 set TERM ph data[1]=0:b9ca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:00541000 ph data[0]=0:541000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0b90a000 set TERM ph data[1]=0:b90a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:00429000 ph data[0]=0:429000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0b8ca000 set TERM ph data[1]=0:b8ca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02e89000 ph data[0]=0:2e89000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:afde2000 set TERM ph data[1]=0:afde2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95840, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95840, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0040d000 ph data[0]=0:40d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:afe46000 set TERM ph data[1]=0:afe46000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95840, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95840, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95840, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:006bd000 ph data[0]=0:6bd000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:afdc6000 set TERM ph data[1]=0:afdc6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95840, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95840, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95840, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02e75000 ph data[0]=0:2e75000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:afe06000 set TERM ph data[1]=0:afe06000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95840, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95840, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95840, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02ef5000 ph data[0]=0:2ef5000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:00566000 set TERM ph data[1]=0:566000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95840, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95840, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95840, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02eb5000 ph data[0]=0:2eb5000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:006ae000 set TERM ph data[1]=0:6ae000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95840, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95840, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95840, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02d25000 ph data[0]=0:2d25000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02e7e000 set TERM ph data[1]=0:2e7e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95840, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95840, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95840, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02cdd000 ph data[0]=0:2cdd000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02e3e000 set TERM ph data[1]=0:2e3e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95840, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95840, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95840, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02d6d000 ph data[0]=0:2d6d000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02eee000 set TERM ph data[1]=0:2eee000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95840, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02da7000 ph data[0]=0:2da7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02d70000 set TERM ph data[1]=0:2d70000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbee5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a30, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 38f95a30, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02b5f000 set TERM ph data[0]=0:2b5f000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a30, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02abf000 ph data[0]=0:2abf000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02db0000 set TERM ph data[1]=0:2db0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02b0f000 ph data[0]=0:2b0f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02ce8000 set TERM ph data[1]=0:2ce8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02a6f000 ph data[0]=0:2a6f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02df0000 set TERM ph data[1]=0:2df0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02977000 ph data[0]=0:2977000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02b20000 set TERM ph data[1]=0:2b20000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:029c7000 ph data[0]=0:29c7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02a70000 set TERM ph data[1]=0:2a70000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:023ff000 ph data[0]=0:23ff000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02ab0000 set TERM ph data[1]=0:2ab0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbe73c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0234f000 ph data[0]=0:234f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02a20000 set TERM ph data[1]=0:2a20000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:002b9000 ph data[0]=0:2b9000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0021a000 set TERM ph data[1]=0:21a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02059000 ph data[0]=0:2059000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:022a2000 set TERM ph data[1]=0:22a2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac360, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac360, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01fd9000 ph data[0]=0:1fd9000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0025a000 set TERM ph data[1]=0:25a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac360, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:021a9000 ph data[0]=0:21a9000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:01fca000 set TERM ph data[1]=0:1fca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e87b0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 395e87b0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02169000 set TERM ph data[0]=0:2169000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e87b0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960ee60, OrigWordsRequested 0x7900, DevSize 0x79 IdeReadWrite (REQ): Starting sector is 3960ee60, Number of WORDS 0x7900, DevSize 0x79 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4a000, count f200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4a000) AtapiVirtToPhysAddr_: f6b4a000 -> 00000000:02129000 ph data[0]=0:2129000 (fff) get Phys(data[n=1+1000]=f6b4b000) AtapiVirtToPhysAddr_: f6b4b000 -> 00000000:0211a000 ph data[1]=0:211a000 (fff) get Phys(data[n=2+1000]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:0028b000 ph data[2]=0:28b000 (fff) get Phys(data[n=3+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:0214c000 ph data[3]=0:214c000 (fff) get Phys(data[n=4+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:02125000 ph data[4]=0:2125000 (fff) get Phys(data[n=5+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:02146000 ph data[5]=0:2146000 (fff) get Phys(data[n=6+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:00297000 ph data[6]=0:297000 (fff) get Phys(data[n=7+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:00238000 ph data[7]=0:238000 (fff) get Phys(data[n=8+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:02121000 ph data[8]=0:2121000 (fff) get Phys(data[n=9+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:02112000 ph data[9]=0:2112000 (fff) get Phys(data[n=10+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:00293000 ph data[10]=0:293000 (fff) get Phys(data[n=11+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:02144000 ph data[11]=0:2144000 (fff) get Phys(data[n=12+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:0211d000 ph data[12]=0:211d000 (fff) get Phys(data[n=13+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:02176000 ph data[13]=0:2176000 (fff) get Phys(data[n=14+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:0029f000 ph data[14]=0:29f000 (fff) get Phys(data[n=15+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:00240000 set TERM ph data[15]=0:240000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ee60, Count 0x79(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5DF9958, B61DBAC0, B64BD778, B5DFB618, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \RECYCLED\INFO2, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7900, WordsLeft 7900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered f200, full size f200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb64ca6d8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \RECYCLED, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:561) NTFS write-support is EXPERIMENTAL and is disabled by default! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:020c1000 ph data[0]=0:20c1000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:00102000 set TERM ph data[1]=0:102000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e87b0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 395e87b0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:020a1000 set TERM ph data[0]=0:20a1000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e87b0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5DF9958, B61DBAC0, B64BD778, B5E21608, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \RECYCLED\INFO2, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \RECYCLED, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:561) NTFS write-support is EXPERIMENTAL and is disabled by default! (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5DF9958, B61DBAC0, B64BD778, B5E21608, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DBAC0, B64BD778, B5EAFB80, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DBAC0, B64BD778, B5EAFB80, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5DF9958, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5DF9958, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5DF9958, B61DA008, B64BC778, B5E21608, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DA008, B64BC778, B5EAFB80, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5DF9958, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BC830, B61DA008, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 71300a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 71300a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5a608 set TERM ph data[0]=0:8d5a608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x71300a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 113120, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 113120, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x113120, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DA008, B64BC778, B5EAFB80, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5DF9958, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BC830, B61DA008, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 71300a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 71300a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5a608 set TERM ph data[0]=0:8d5a608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x71300a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 113120, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 113120, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x113120, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e53aa0, CDB 0xb5e53ad0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e53aa0 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e53ad0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e53ad0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e53aa0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e53aa0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53aa0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e53aa0, CDB 0xb5e53ad0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e53aa0 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e53ad0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e53ad0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e53aa0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e53aa0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53aa0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e53aa0, CDB 0xb5e53ad0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e53aa0 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e53ad0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e53ad0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e53aa0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e53aa0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53aa0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e53aa0, CDB 0xb5e53ad0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e53aa0 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e53ad0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e53ad0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e53aa0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e53aa0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53aa0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e53aa0, CDB 0xb5e53ad0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e53aa0 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e53ad0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e53ad0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e53aa0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e53aa0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53aa0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5df8740) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5df8740 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5df8710, status 4 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e53aa0, CDB 0xb5e53ad0, AtaReq 0xb6777018, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e53aa0 TopLevel (3), AtaReq 0xb6777018 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e53ad0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6777080, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e53ad0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0xa5, base 8e3a080 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e53aa0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e53aa0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e53aa0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01ea1000 ph data[0]=0:1ea1000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:020b2000 ph data[1]=0:20b2000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01f43000 ph data[2]=0:1f43000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:021ac000 ph data[3]=0:21ac000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:020bd000 ph data[4]=0:20bd000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:002de000 ph data[5]=0:2de000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:02197000 ph data[6]=0:2197000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00100000 ph data[7]=0:100000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01e99000 ph data[8]=0:1e99000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:020aa000 ph data[9]=0:20aa000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01f3b000 ph data[10]=0:1f3b000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:021a4000 ph data[11]=0:21a4000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:020b5000 ph data[12]=0:20b5000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:002e6000 ph data[13]=0:2e6000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0218f000 ph data[14]=0:218f000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:021f8000 set TERM ph data[15]=0:21f8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01e91000 ph data[0]=0:1e91000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:020a2000 ph data[1]=0:20a2000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01fb3000 ph data[2]=0:1fb3000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0219c000 ph data[3]=0:219c000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:020ad000 ph data[4]=0:20ad000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:002ee000 ph data[5]=0:2ee000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:02187000 ph data[6]=0:2187000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:021e8000 ph data[7]=0:21e8000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01e89000 ph data[8]=0:1e89000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0209a000 ph data[9]=0:209a000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01fab000 ph data[10]=0:1fab000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:02194000 ph data[11]=0:2194000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0218d000 ph data[12]=0:218d000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:002f6000 ph data[13]=0:2f6000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0217f000 ph data[14]=0:217f000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02128000 set TERM ph data[15]=0:2128000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01f41000 ph data[0]=0:1f41000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02092000 ph data[1]=0:2092000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01fa3000 ph data[2]=0:1fa3000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:020b4000 ph data[3]=0:20b4000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:02185000 ph data[4]=0:2185000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:00206000 ph data[5]=0:206000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02177000 ph data[6]=0:2177000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:02120000 ph data[7]=0:2120000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01f39000 ph data[8]=0:1f39000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0208a000 ph data[9]=0:208a000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01f9b000 ph data[10]=0:1f9b000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:020ac000 ph data[11]=0:20ac000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0217d000 ph data[12]=0:217d000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0020e000 ph data[13]=0:20e000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:020c7000 ph data[14]=0:20c7000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:00260000 set TERM ph data[15]=0:260000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01fb1000 ph data[0]=0:1fb1000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:02082000 ph data[1]=0:2082000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01f93000 ph data[2]=0:1f93000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0211c000 ph data[3]=0:211c000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:02175000 ph data[4]=0:2175000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0213e000 ph data[5]=0:213e000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0205f000 ph data[6]=0:205f000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:00268000 ph data[7]=0:268000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01fa9000 ph data[8]=0:1fa9000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:02162000 ph data[9]=0:2162000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01f8b000 ph data[10]=0:1f8b000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:02114000 ph data[11]=0:2114000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0216d000 ph data[12]=0:216d000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:02136000 ph data[13]=0:2136000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02057000 ph data[14]=0:2057000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:00270000 set TERM ph data[15]=0:270000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98d4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01fa1000 ph data[0]=0:1fa1000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0215a000 ph data[1]=0:215a000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:02043000 ph data[2]=0:2043000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0218c000 ph data[3]=0:218c000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02165000 ph data[4]=0:2165000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0212e000 ph data[5]=0:212e000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01f8f000 ph data[6]=0:1f8f000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:00278000 ph data[7]=0:278000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01f99000 ph data[8]=0:1f99000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:02152000 ph data[9]=0:2152000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0203b000 ph data[10]=0:203b000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:02184000 ph data[11]=0:2184000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0215d000 ph data[12]=0:215d000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:02126000 ph data[13]=0:2126000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01f87000 ph data[14]=0:1f87000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:00280000 set TERM ph data[15]=0:280000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01f91000 ph data[0]=0:1f91000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0214a000 ph data[1]=0:214a000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01f73000 ph data[2]=0:1f73000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0217c000 ph data[3]=0:217c000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02155000 ph data[4]=0:2155000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0211e000 ph data[5]=0:211e000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01f7f000 ph data[6]=0:1f7f000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:00288000 ph data[7]=0:288000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01f89000 ph data[8]=0:1f89000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:021ca000 ph data[9]=0:21ca000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01f6b000 ph data[10]=0:1f6b000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:02174000 ph data[11]=0:2174000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:020a5000 ph data[12]=0:20a5000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:02196000 ph data[13]=0:2196000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01f77000 ph data[14]=0:1f77000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00290000 set TERM ph data[15]=0:290000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:02041000 ph data[0]=0:2041000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:021c2000 ph data[1]=0:21c2000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01f63000 ph data[2]=0:1f63000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0216c000 ph data[3]=0:216c000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01f6d000 ph data[4]=0:1f6d000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0218e000 ph data[5]=0:218e000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01f6f000 ph data[6]=0:1f6f000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:00298000 ph data[7]=0:298000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:02039000 ph data[8]=0:2039000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:021ba000 ph data[9]=0:21ba000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01f5b000 ph data[10]=0:1f5b000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:02164000 ph data[11]=0:2164000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01f65000 ph data[12]=0:1f65000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:02186000 ph data[13]=0:2186000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01f67000 ph data[14]=0:1f67000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:020b0000 set TERM ph data[15]=0:20b0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01f71000 ph data[0]=0:1f71000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:021b2000 ph data[1]=0:21b2000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01f53000 ph data[2]=0:1f53000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:020a4000 ph data[3]=0:20a4000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01f5d000 ph data[4]=0:1f5d000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:00296000 ph data[5]=0:296000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0201f000 ph data[6]=0:201f000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:020a8000 ph data[7]=0:20a8000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01f69000 ph data[8]=0:1f69000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:01f5a000 ph data[9]=0:1f5a000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01f4b000 ph data[10]=0:1f4b000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0203c000 ph data[11]=0:203c000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01f55000 ph data[12]=0:1f55000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0029e000 ph data[13]=0:29e000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02017000 ph data[14]=0:2017000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:01fe0000 set TERM ph data[15]=0:1fe0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01f61000 ph data[0]=0:1f61000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:01f52000 ph data[1]=0:1f52000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:02003000 ph data[2]=0:2003000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01f74000 ph data[3]=0:1f74000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01f4d000 ph data[4]=0:1f4d000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:002a6000 ph data[5]=0:2a6000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0208f000 ph data[6]=0:208f000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:01fd8000 ph data[7]=0:1fd8000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01f59000 ph data[8]=0:1f59000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:01f4a000 ph data[9]=0:1f4a000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01ffb000 ph data[10]=0:1ffb000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:01f6c000 ph data[11]=0:1f6c000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01f45000 ph data[12]=0:1f45000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:002ae000 ph data[13]=0:2ae000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:02087000 ph data[14]=0:2087000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:01fd0000 set TERM ph data[15]=0:1fd0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01f51000 ph data[0]=0:1f51000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:01f42000 ph data[1]=0:1f42000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:02073000 ph data[2]=0:2073000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:01f64000 ph data[3]=0:1f64000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01f3d000 ph data[4]=0:1f3d000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:002b6000 ph data[5]=0:2b6000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0207f000 ph data[6]=0:207f000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:01fc8000 ph data[7]=0:1fc8000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01f49000 ph data[8]=0:1f49000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:01f3a000 ph data[9]=0:1f3a000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0206b000 ph data[10]=0:206b000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01f5c000 ph data[11]=0:1f5c000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01fb5000 ph data[12]=0:1fb5000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:002be000 ph data[13]=0:2be000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:02077000 ph data[14]=0:2077000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:01fc0000 set TERM ph data[15]=0:1fc0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf4e8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01fc1000 ph data[0]=0:1fc1000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01fb2000 ph data[1]=0:1fb2000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:02063000 ph data[2]=0:2063000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:01f54000 ph data[3]=0:1f54000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:02075000 ph data[4]=0:2075000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:002c6000 ph data[5]=0:2c6000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0206f000 ph data[6]=0:206f000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:01fb8000 ph data[7]=0:1fb8000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01fb9000 ph data[7]=0:1fb8000 (1fff) get Phys(data[n=8+2000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01faa000 ph data[8]=0:1faa000 (fff) get Phys(data[n=9+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0205b000 ph data[9]=0:205b000 (fff) get Phys(data[n=10+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01f4c000 ph data[10]=0:1f4c000 (fff) get Phys(data[n=11+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0206d000 ph data[11]=0:206d000 (fff) get Phys(data[n=12+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:002ce000 ph data[12]=0:2ce000 (fff) get Phys(data[n=13+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02067000 ph data[13]=0:2067000 (fff) get Phys(data[n=14+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02070000 set TERM ph data[14]=0:2070000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf4d4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:02031000 ph data[0]=0:2031000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01fa2000 ph data[1]=0:1fa2000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:02053000 ph data[2]=0:2053000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01f44000 ph data[3]=0:1f44000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:02065000 ph data[4]=0:2065000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0217e000 ph data[5]=0:217e000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01fdf000 ph data[6]=0:1fdf000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:02068000 ph data[7]=0:2068000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:02029000 ph data[8]=0:2029000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0205a000 ph data[9]=0:205a000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0204b000 ph data[10]=0:204b000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01ffc000 ph data[11]=0:1ffc000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0205d000 ph data[12]=0:205d000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0203e000 ph data[13]=0:203e000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01fd7000 set TERM ph data[14]=0:1fd7000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:02021000 ph data[0]=0:2021000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:02052000 ph data[1]=0:2052000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:020cb000 ph data[2]=0:20cb000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:02074000 ph data[3]=0:2074000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02055000 ph data[4]=0:2055000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:02036000 ph data[5]=0:2036000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0204f000 ph data[6]=0:204f000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:020d8000 ph data[7]=0:20d8000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:02019000 ph data[8]=0:2019000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0204a000 ph data[9]=0:204a000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:020c3000 ph data[10]=0:20c3000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0206c000 ph data[11]=0:206c000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0204d000 ph data[12]=0:204d000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0202e000 ph data[13]=0:202e000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:02047000 ph data[14]=0:2047000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:020d0000 set TERM ph data[15]=0:20d0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:02011000 ph data[0]=0:2011000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:02042000 ph data[1]=0:2042000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01ff3000 ph data[2]=0:1ff3000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:02064000 ph data[3]=0:2064000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02045000 ph data[4]=0:2045000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:02026000 ph data[5]=0:2026000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0203f000 ph data[6]=0:203f000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:020c8000 ph data[7]=0:20c8000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:02009000 ph data[8]=0:2009000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0203a000 ph data[9]=0:203a000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01feb000 ph data[10]=0:1feb000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0205c000 ph data[11]=0:205c000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01f75000 ph data[12]=0:1f75000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0201e000 ph data[13]=0:201e000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:02037000 ph data[14]=0:2037000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:020c0000 set TERM ph data[15]=0:20c0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01e81000 ph data[0]=0:1e81000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01f72000 ph data[1]=0:1f72000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01fe3000 ph data[2]=0:1fe3000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:02054000 ph data[3]=0:2054000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:02035000 ph data[4]=0:2035000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02016000 ph data[5]=0:2016000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0202f000 ph data[6]=0:202f000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:020b8000 ph data[7]=0:20b8000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01e79000 ph data[8]=0:1e79000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01f6a000 ph data[9]=0:1f6a000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01fdb000 ph data[10]=0:1fdb000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0204c000 ph data[11]=0:204c000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0202d000 ph data[12]=0:202d000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0200e000 ph data[13]=0:200e000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02027000 ph data[14]=0:2027000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02178000 set TERM ph data[15]=0:2178000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01ef1000 ph data[0]=0:1ef1000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01f62000 ph data[1]=0:1f62000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01fd3000 ph data[2]=0:1fd3000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:02044000 ph data[3]=0:2044000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:02025000 ph data[4]=0:2025000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02086000 ph data[5]=0:2086000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0209f000 ph data[6]=0:209f000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:02170000 ph data[7]=0:2170000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01ee9000 ph data[8]=0:1ee9000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0201a000 ph data[9]=0:201a000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01fcb000 ph data[10]=0:1fcb000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01fbc000 ph data[11]=0:1fbc000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0201d000 ph data[12]=0:201d000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:01ffe000 ph data[13]=0:1ffe000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02097000 ph data[14]=0:2097000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:020a0000 set TERM ph data[15]=0:20a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf99b4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01ee1000 ph data[0]=0:1ee1000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:02012000 ph data[1]=0:2012000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01f83000 ph data[2]=0:1f83000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:02034000 ph data[3]=0:2034000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02015000 ph data[4]=0:2015000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01ff6000 ph data[5]=0:1ff6000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0210f000 ph data[6]=0:210f000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:02098000 ph data[7]=0:2098000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01ed9000 ph data[8]=0:1ed9000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0200a000 ph data[9]=0:200a000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01f7b000 ph data[10]=0:1f7b000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0202c000 ph data[11]=0:202c000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0200d000 ph data[12]=0:200d000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01fee000 ph data[13]=0:1fee000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:02107000 ph data[14]=0:2107000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:02090000 set TERM ph data[15]=0:2090000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01ed1000 ph data[0]=0:1ed1000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:02002000 ph data[1]=0:2002000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01eb3000 ph data[2]=0:1eb3000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:02024000 ph data[3]=0:2024000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02005000 ph data[4]=0:2005000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01fe6000 ph data[5]=0:1fe6000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:020ff000 ph data[6]=0:20ff000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:02088000 ph data[7]=0:2088000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01ec9000 ph data[8]=0:1ec9000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:01ffa000 ph data[9]=0:1ffa000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01eab000 ph data[10]=0:1eab000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0201c000 ph data[11]=0:201c000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0207d000 ph data[12]=0:207d000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01fde000 ph data[13]=0:1fde000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:020f7000 ph data[14]=0:20f7000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02080000 set TERM ph data[15]=0:2080000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01ef9000 ph data[0]=0:1ef9000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02072000 ph data[1]=0:2072000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01ea3000 ph data[2]=0:1ea3000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:02014000 ph data[3]=0:2014000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:020fd000 ph data[4]=0:20fd000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:01fd6000 ph data[5]=0:1fd6000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:020ef000 ph data[6]=0:20ef000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:02078000 ph data[7]=0:2078000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01e39000 ph data[8]=0:1e39000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0206a000 ph data[9]=0:206a000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01e9b000 ph data[10]=0:1e9b000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0200c000 ph data[11]=0:200c000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:020f5000 ph data[12]=0:20f5000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01fce000 ph data[13]=0:1fce000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:020e7000 ph data[14]=0:20e7000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:020f8000 set TERM ph data[15]=0:20f8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01e31000 ph data[0]=0:1e31000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:02062000 ph data[1]=0:2062000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01e93000 ph data[2]=0:1e93000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:02004000 ph data[3]=0:2004000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:020ed000 ph data[4]=0:20ed000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02046000 ph data[5]=0:2046000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01f5f000 ph data[6]=0:1f5f000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:020f0000 ph data[7]=0:20f0000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01e29000 ph data[8]=0:1e29000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:020da000 ph data[9]=0:20da000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01e8b000 ph data[10]=0:1e8b000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0207c000 ph data[11]=0:207c000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:020e5000 ph data[12]=0:20e5000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:02106000 ph data[13]=0:2106000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01f57000 ph data[14]=0:1f57000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:02168000 set TERM ph data[15]=0:2168000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01e21000 ph data[0]=0:1e21000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:020d2000 ph data[1]=0:20d2000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01ebb000 ph data[2]=0:1ebb000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:02104000 ph data[3]=0:2104000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:020dd000 ph data[4]=0:20dd000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:020fe000 ph data[5]=0:20fe000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01fcf000 ph data[6]=0:1fcf000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:02160000 ph data[7]=0:2160000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01e19000 ph data[8]=0:1e19000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:020ca000 ph data[9]=0:20ca000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01f33000 ph data[10]=0:1f33000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:020fc000 ph data[11]=0:20fc000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:020d5000 ph data[12]=0:20d5000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:020f6000 ph data[13]=0:20f6000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01fc7000 ph data[14]=0:1fc7000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:02158000 set TERM ph data[15]=0:2158000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01e11000 ph data[0]=0:1e11000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:020c2000 ph data[1]=0:20c2000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01f2b000 ph data[2]=0:1f2b000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:020f4000 ph data[3]=0:20f4000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:020cd000 ph data[4]=0:20cd000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:020ee000 ph data[5]=0:20ee000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01fbf000 ph data[6]=0:1fbf000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:02150000 ph data[7]=0:2150000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01e09000 ph data[8]=0:1e09000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:020ba000 ph data[9]=0:20ba000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01f23000 ph data[10]=0:1f23000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:020ec000 ph data[11]=0:20ec000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01ffd000 ph data[12]=0:1ffd000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:020e6000 ph data[13]=0:20e6000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01fb7000 ph data[14]=0:1fb7000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02148000 set TERM ph data[15]=0:2148000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf504 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01eb9000 ph data[0]=0:1eb9000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01ff2000 ph data[1]=0:1ff2000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01f1b000 ph data[2]=0:1f1b000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:020e4000 ph data[3]=0:20e4000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01fad000 ph data[4]=0:1fad000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:020de000 ph data[5]=0:20de000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01faf000 ph data[6]=0:1faf000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:02140000 ph data[7]=0:2140000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01f31000 ph data[8]=0:1f31000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01fea000 ph data[9]=0:1fea000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01f13000 ph data[10]=0:1f13000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:020dc000 ph data[11]=0:20dc000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01fa5000 ph data[12]=0:1fa5000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:020d6000 ph data[13]=0:20d6000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01fa7000 ph data[14]=0:1fa7000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:01fb0000 set TERM ph data[15]=0:1fb0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf4d4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01f29000 ph data[0]=0:1f29000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01fe2000 ph data[1]=0:1fe2000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01f0b000 ph data[2]=0:1f0b000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:020d4000 ph data[3]=0:20d4000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01f9d000 ph data[4]=0:1f9d000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02006000 ph data[5]=0:2006000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01e9f000 ph data[6]=0:1e9f000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01fa8000 ph data[7]=0:1fa8000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01f21000 ph data[8]=0:1f21000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:01f9a000 ph data[9]=0:1f9a000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01f03000 ph data[10]=0:1f03000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01f3c000 ph data[11]=0:1f3c000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01f95000 ph data[12]=0:1f95000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:021ce000 ph data[13]=0:21ce000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01e97000 set TERM ph data[14]=0:1e97000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 fixme:(dll/win32/comctl32/toolbar.c:5624) [000300DE] response 1 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960f060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6ba6000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6ba6000) AtapiVirtToPhysAddr_: f6ba6000 -> 00000000:01eeb000 ph data[0]=0:1eeb000 (fff) get Phys(data[n=1+1000]=f6ba7000) AtapiVirtToPhysAddr_: f6ba7000 -> 00000000:01fa4000 ph data[1]=0:1fa4000 (fff) get Phys(data[n=2+1000]=f6ba8000) AtapiVirtToPhysAddr_: f6ba8000 -> 00000000:01f85000 ph data[2]=0:1f85000 (fff) get Phys(data[n=3+1000]=f6ba9000) AtapiVirtToPhysAddr_: f6ba9000 -> 00000000:021b6000 ph data[3]=0:21b6000 (fff) get Phys(data[n=4+1000]=f6baa000) AtapiVirtToPhysAddr_: f6baa000 -> 00000000:01eff000 ph data[4]=0:1eff000 (fff) get Phys(data[n=5+1000]=f6bab000) AtapiVirtToPhysAddr_: f6bab000 -> 00000000:02008000 ph data[5]=0:2008000 (fff) get Phys(data[n=6+1000]=f6bac000) AtapiVirtToPhysAddr_: f6bac000 -> 00000000:01f01000 ph data[6]=0:1f01000 (fff) get Phys(data[n=7+1000]=f6bad000) AtapiVirtToPhysAddr_: f6bad000 -> 00000000:01f82000 ph data[7]=0:1f82000 (fff) get Phys(data[n=8+1000]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:01ee3000 ph data[8]=0:1ee3000 (fff) get Phys(data[n=9+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:01f9c000 ph data[9]=0:1f9c000 (fff) get Phys(data[n=10+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:01f7d000 ph data[10]=0:1f7d000 (fff) get Phys(data[n=11+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:021ae000 ph data[11]=0:21ae000 (fff) get Phys(data[n=12+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:01ef7000 ph data[12]=0:1ef7000 (fff) get Phys(data[n=13+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:02000000 ph data[13]=0:2000000 (fff) get Phys(data[n=14+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:01ca9000 ph data[14]=0:1ca9000 (fff) get Phys(data[n=15+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:01f7a000 set TERM ph data[15]=0:1f7a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f060, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665418 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960f0e0, OrigWordsRequested 0x5e00, DevSize 0x5e IdeReadWrite (REQ): Starting sector is 3960f0e0, Number of WORDS 0x5e00, DevSize 0x5e AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bb6000, count bc00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:01edb000 ph data[0]=0:1edb000 (fff) get Phys(data[n=1+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:01f94000 ph data[1]=0:1f94000 (fff) get Phys(data[n=2+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:01eb5000 ph data[2]=0:1eb5000 (fff) get Phys(data[n=3+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:021a6000 ph data[3]=0:21a6000 (fff) get Phys(data[n=4+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:01eef000 ph data[4]=0:1eef000 (fff) get Phys(data[n=5+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:01ff8000 ph data[5]=0:1ff8000 (fff) get Phys(data[n=6+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:01d21000 ph data[6]=0:1d21000 (fff) get Phys(data[n=7+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:01eb2000 ph data[7]=0:1eb2000 (fff) get Phys(data[n=8+1000]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:01ed3000 ph data[8]=0:1ed3000 (fff) get Phys(data[n=9+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:01f8c000 ph data[9]=0:1f8c000 (fff) get Phys(data[n=10+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:01eed000 ph data[10]=0:1eed000 (fff) get Phys(data[n=11+1000]=f6bc1000) AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:0219e000 set TERM ph data[11]=0:219e000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f0e0, Count 0x5e(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xc, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 5e00, WordsLeft 5e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered bc00, full size bc00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:3b2ff000 ph data[0]=0:3b2ff000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:3b2f8000 ph data[1]=0:3b2f8000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:3b2f9000 ph data[1]=0:3b2f8000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:3b302000 ph data[2]=0:3b302000 (fff) get Phys(data[n=3+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:3b31b000 ph data[3]=0:3b31b000 (fff) get Phys(data[n=4+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:3b314000 ph data[4]=0:3b314000 (fff) get Phys(data[n=5+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:3b315000 ph data[4]=0:3b314000 (1fff) get Phys(data[n=5+2000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:3b30e000 ph data[5]=0:3b30e000 (fff) get Phys(data[n=6+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:3b307000 ph data[6]=0:3b307000 (fff) get Phys(data[n=7+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:3b300000 ph data[7]=0:3b300000 (fff) get Phys(data[n=8+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:3b301000 ph data[7]=0:3b300000 (1fff) get Phys(data[n=8+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:3b30a000 ph data[8]=0:3b30a000 (fff) get Phys(data[n=9+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:3b323000 ph data[9]=0:3b323000 (fff) get Phys(data[n=10+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:3b31c000 ph data[10]=0:3b31c000 (fff) get Phys(data[n=11+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:3b31d000 ph data[10]=0:3b31c000 (1fff) get Phys(data[n=11+2000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:3b316000 set TERM ph data[11]=0:3b316000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xc, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:3b30f000 ph data[0]=0:3b30f000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:3b308000 ph data[1]=0:3b308000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:3b309000 ph data[1]=0:3b308000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:3b312000 ph data[2]=0:3b312000 (fff) get Phys(data[n=3+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:3b32b000 ph data[3]=0:3b32b000 (fff) get Phys(data[n=4+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:3b324000 ph data[4]=0:3b324000 (fff) get Phys(data[n=5+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:3b325000 ph data[4]=0:3b324000 (1fff) get Phys(data[n=5+2000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:3b31e000 ph data[5]=0:3b31e000 (fff) get Phys(data[n=6+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:3b317000 ph data[6]=0:3b317000 (fff) get Phys(data[n=7+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:3b310000 ph data[7]=0:3b310000 (fff) get Phys(data[n=8+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:3b311000 ph data[7]=0:3b310000 (1fff) get Phys(data[n=8+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:3b31a000 ph data[8]=0:3b31a000 (fff) get Phys(data[n=9+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:3b333000 ph data[9]=0:3b333000 (fff) get Phys(data[n=10+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:3b32c000 ph data[10]=0:3b32c000 (fff) get Phys(data[n=11+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:3b32d000 ph data[10]=0:3b32c000 (1fff) get Phys(data[n=11+2000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3b326000 set TERM ph data[11]=0:3b326000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a8e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xc, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:3b31f000 ph data[0]=0:3b31f000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:3b318000 ph data[1]=0:3b318000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:3b319000 ph data[1]=0:3b318000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:3b322000 ph data[2]=0:3b322000 (fff) get Phys(data[n=3+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:3b33b000 ph data[3]=0:3b33b000 (fff) get Phys(data[n=4+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:3b334000 ph data[4]=0:3b334000 (fff) get Phys(data[n=5+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:3b335000 ph data[4]=0:3b334000 (1fff) get Phys(data[n=5+2000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:3b32e000 ph data[5]=0:3b32e000 (fff) get Phys(data[n=6+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:3b327000 ph data[6]=0:3b327000 (fff) get Phys(data[n=7+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:3b320000 ph data[7]=0:3b320000 (fff) get Phys(data[n=8+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:3b321000 ph data[7]=0:3b320000 (1fff) get Phys(data[n=8+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3b32a000 ph data[8]=0:3b32a000 (fff) get Phys(data[n=9+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:3b343000 ph data[9]=0:3b343000 (fff) get Phys(data[n=10+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:3b33c000 ph data[10]=0:3b33c000 (fff) get Phys(data[n=11+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:3b33d000 ph data[10]=0:3b33c000 (1fff) get Phys(data[n=11+2000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:3b336000 set TERM ph data[11]=0:3b336000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xc, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960a9e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960a9e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:3b32f000 ph data[0]=0:3b32f000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:3b328000 ph data[1]=0:3b328000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:3b329000 ph data[1]=0:3b328000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:3b332000 ph data[2]=0:3b332000 (fff) get Phys(data[n=3+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:3b34b000 ph data[3]=0:3b34b000 (fff) get Phys(data[n=4+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:3b344000 ph data[4]=0:3b344000 (fff) get Phys(data[n=5+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:3b345000 ph data[4]=0:3b344000 (1fff) get Phys(data[n=5+2000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:3b33e000 ph data[5]=0:3b33e000 (fff) get Phys(data[n=6+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:3b337000 ph data[6]=0:3b337000 (fff) get Phys(data[n=7+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:3b330000 ph data[7]=0:3b330000 (fff) get Phys(data[n=8+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:3b331000 ph data[7]=0:3b330000 (1fff) get Phys(data[n=8+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:3b33a000 ph data[8]=0:3b33a000 (fff) get Phys(data[n=9+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:3b353000 ph data[9]=0:3b353000 (fff) get Phys(data[n=10+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:3b34c000 ph data[10]=0:3b34c000 (fff) get Phys(data[n=11+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3b34d000 ph data[10]=0:3b34c000 (1fff) get Phys(data[n=11+2000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:3b346000 set TERM ph data[11]=0:3b346000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960a9e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xc, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960aa60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960aa60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:26a52000 ph data[0]=0:26a52000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:26a5b000 ph data[1]=0:26a5b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:26a5c000 ph data[1]=0:26a5b000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:26a5d000 ph data[1]=0:26a5b000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:26a5e000 ph data[1]=0:26a5b000 (3fff) get Phys(data[n=2+4000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:26a57000 ph data[2]=0:26a57000 (fff) get Phys(data[n=3+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:26a58000 ph data[2]=0:26a57000 (1fff) get Phys(data[n=3+2000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:26a61000 ph data[3]=0:26a61000 (fff) get Phys(data[n=4+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:26a5a000 ph data[4]=0:26a5a000 (fff) get Phys(data[n=5+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:26a63000 ph data[5]=0:26a63000 (fff) get Phys(data[n=6+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:26a64000 ph data[5]=0:26a63000 (1fff) get Phys(data[n=6+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:26a65000 ph data[5]=0:26a63000 (2fff) get Phys(data[n=6+3000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:26a66000 ph data[5]=0:26a63000 (3fff) get Phys(data[n=6+4000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:26a5f000 ph data[6]=0:26a5f000 (fff) get Phys(data[n=7+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:26a60000 ph data[6]=0:26a5f000 (1fff) get Phys(data[n=7+2000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:26a69000 set TERM ph data[7]=0:26a69000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960aa60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x8, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960aae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960aae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:26a62000 ph data[0]=0:26a62000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:26a6b000 ph data[1]=0:26a6b000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:26a6c000 ph data[1]=0:26a6b000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:26a6d000 ph data[1]=0:26a6b000 (2fff) get Phys(data[n=2+3000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:26a6e000 ph data[1]=0:26a6b000 (3fff) get Phys(data[n=2+4000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:26a67000 ph data[2]=0:26a67000 (fff) get Phys(data[n=3+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:26a68000 ph data[2]=0:26a67000 (1fff) get Phys(data[n=3+2000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:26a71000 ph data[3]=0:26a71000 (fff) get Phys(data[n=4+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:26a6a000 ph data[4]=0:26a6a000 (fff) get Phys(data[n=5+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:26a73000 ph data[5]=0:26a73000 (fff) get Phys(data[n=6+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:26a74000 ph data[5]=0:26a73000 (1fff) get Phys(data[n=6+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:26a75000 ph data[5]=0:26a73000 (2fff) get Phys(data[n=6+3000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:26a76000 ph data[5]=0:26a73000 (3fff) get Phys(data[n=6+4000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:26a6f000 ph data[6]=0:26a6f000 (fff) get Phys(data[n=7+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:26a70000 ph data[6]=0:26a6f000 (1fff) get Phys(data[n=7+2000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:26a79000 set TERM ph data[7]=0:26a79000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960aae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ab60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ab60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:26a72000 ph data[0]=0:26a72000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:26a7b000 ph data[1]=0:26a7b000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:26a7c000 ph data[1]=0:26a7b000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:26a7d000 ph data[1]=0:26a7b000 (2fff) get Phys(data[n=2+3000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:26a7e000 ph data[1]=0:26a7b000 (3fff) get Phys(data[n=2+4000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:26a77000 ph data[2]=0:26a77000 (fff) get Phys(data[n=3+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:26a78000 ph data[2]=0:26a77000 (1fff) get Phys(data[n=3+2000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:26a81000 ph data[3]=0:26a81000 (fff) get Phys(data[n=4+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:26a7a000 ph data[4]=0:26a7a000 (fff) get Phys(data[n=5+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:26a83000 ph data[5]=0:26a83000 (fff) get Phys(data[n=6+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:26a84000 ph data[5]=0:26a83000 (1fff) get Phys(data[n=6+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:26a85000 ph data[5]=0:26a83000 (2fff) get Phys(data[n=6+3000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:26a86000 ph data[5]=0:26a83000 (3fff) get Phys(data[n=6+4000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:26a7f000 ph data[6]=0:26a7f000 (fff) get Phys(data[n=7+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:26a80000 ph data[6]=0:26a7f000 (1fff) get Phys(data[n=7+2000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:26a89000 set TERM ph data[7]=0:26a89000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ab60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x8, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960abe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960abe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:26a82000 ph data[0]=0:26a82000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:26a8b000 ph data[1]=0:26a8b000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:26a8c000 ph data[1]=0:26a8b000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:26a8d000 ph data[1]=0:26a8b000 (2fff) get Phys(data[n=2+3000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:26a8e000 ph data[1]=0:26a8b000 (3fff) get Phys(data[n=2+4000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:26a87000 ph data[2]=0:26a87000 (fff) get Phys(data[n=3+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:26a88000 ph data[2]=0:26a87000 (1fff) get Phys(data[n=3+2000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:26a91000 ph data[3]=0:26a91000 (fff) get Phys(data[n=4+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:26a8a000 ph data[4]=0:26a8a000 (fff) get Phys(data[n=5+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:26a93000 ph data[5]=0:26a93000 (fff) get Phys(data[n=6+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:26a94000 ph data[5]=0:26a93000 (1fff) get Phys(data[n=6+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:26a95000 ph data[5]=0:26a93000 (2fff) get Phys(data[n=6+3000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:26a96000 ph data[5]=0:26a93000 (3fff) get Phys(data[n=6+4000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:26a8f000 ph data[6]=0:26a8f000 (fff) get Phys(data[n=7+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:26a90000 ph data[6]=0:26a8f000 (1fff) get Phys(data[n=7+2000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:26a99000 set TERM ph data[7]=0:26a99000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960abe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ac60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ac60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:26a92000 ph data[0]=0:26a92000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:26a9b000 ph data[1]=0:26a9b000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:26a9c000 ph data[1]=0:26a9b000 (1fff) get Phys(data[n=2+2000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:26a9d000 ph data[1]=0:26a9b000 (2fff) get Phys(data[n=2+3000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:26a9e000 ph data[1]=0:26a9b000 (3fff) get Phys(data[n=2+4000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:26a97000 ph data[2]=0:26a97000 (fff) get Phys(data[n=3+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:26a98000 ph data[2]=0:26a97000 (1fff) get Phys(data[n=3+2000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:26aa1000 ph data[3]=0:26aa1000 (fff) get Phys(data[n=4+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:26a9a000 ph data[4]=0:26a9a000 (fff) get Phys(data[n=5+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:26aa3000 ph data[5]=0:26aa3000 (fff) get Phys(data[n=6+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:26aa4000 ph data[5]=0:26aa3000 (1fff) get Phys(data[n=6+2000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:26aa5000 ph data[5]=0:26aa3000 (2fff) get Phys(data[n=6+3000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:26aa6000 ph data[5]=0:26aa3000 (3fff) get Phys(data[n=6+4000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:26a9f000 ph data[6]=0:26a9f000 (fff) get Phys(data[n=7+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:26aa0000 ph data[6]=0:26a9f000 (1fff) get Phys(data[n=7+2000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:26aa9000 set TERM ph data[7]=0:26aa9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ac60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ace0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ace0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:26aa2000 ph data[0]=0:26aa2000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:26aab000 ph data[1]=0:26aab000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:26aac000 ph data[1]=0:26aab000 (1fff) get Phys(data[n=2+2000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:26aad000 ph data[1]=0:26aab000 (2fff) get Phys(data[n=2+3000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:26aae000 ph data[1]=0:26aab000 (3fff) get Phys(data[n=2+4000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:26aa7000 ph data[2]=0:26aa7000 (fff) get Phys(data[n=3+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:26aa8000 ph data[2]=0:26aa7000 (1fff) get Phys(data[n=3+2000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:26ab1000 ph data[3]=0:26ab1000 (fff) get Phys(data[n=4+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:26aaa000 ph data[4]=0:26aaa000 (fff) get Phys(data[n=5+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:26ab3000 ph data[5]=0:26ab3000 (fff) get Phys(data[n=6+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:26ab4000 ph data[5]=0:26ab3000 (1fff) get Phys(data[n=6+2000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:26ab5000 ph data[5]=0:26ab3000 (2fff) get Phys(data[n=6+3000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:26ab6000 ph data[5]=0:26ab3000 (3fff) get Phys(data[n=6+4000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:26aaf000 ph data[6]=0:26aaf000 (fff) get Phys(data[n=7+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:26ab0000 ph data[6]=0:26aaf000 (1fff) get Phys(data[n=7+2000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:26ab9000 set TERM ph data[7]=0:26ab9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b560c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ace0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x8, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ad60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ad60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:26ab2000 ph data[0]=0:26ab2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:26abb000 ph data[1]=0:26abb000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:26abc000 ph data[1]=0:26abb000 (1fff) get Phys(data[n=2+2000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:26abd000 ph data[1]=0:26abb000 (2fff) get Phys(data[n=2+3000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:26abe000 ph data[1]=0:26abb000 (3fff) get Phys(data[n=2+4000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:26ab7000 ph data[2]=0:26ab7000 (fff) get Phys(data[n=3+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:26ab8000 ph data[2]=0:26ab7000 (1fff) get Phys(data[n=3+2000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:26ac1000 ph data[3]=0:26ac1000 (fff) get Phys(data[n=4+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:26aba000 ph data[4]=0:26aba000 (fff) get Phys(data[n=5+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:26ac3000 ph data[5]=0:26ac3000 (fff) get Phys(data[n=6+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:26ac4000 ph data[5]=0:26ac3000 (1fff) get Phys(data[n=6+2000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:26ac5000 ph data[5]=0:26ac3000 (2fff) get Phys(data[n=6+3000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:26ac6000 ph data[5]=0:26ac3000 (3fff) get Phys(data[n=6+4000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:26abf000 ph data[6]=0:26abf000 (fff) get Phys(data[n=7+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:26ac0000 ph data[6]=0:26abf000 (1fff) get Phys(data[n=7+2000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:26ac9000 set TERM ph data[7]=0:26ac9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ad60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ade0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ade0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:26ac2000 ph data[0]=0:26ac2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:26acb000 ph data[1]=0:26acb000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:26acc000 ph data[1]=0:26acb000 (1fff) get Phys(data[n=2+2000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:26acd000 ph data[1]=0:26acb000 (2fff) get Phys(data[n=2+3000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:26ace000 ph data[1]=0:26acb000 (3fff) get Phys(data[n=2+4000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:26ac7000 ph data[2]=0:26ac7000 (fff) get Phys(data[n=3+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:26ac8000 ph data[2]=0:26ac7000 (1fff) get Phys(data[n=3+2000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:26ad1000 ph data[3]=0:26ad1000 (fff) get Phys(data[n=4+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:26aca000 ph data[4]=0:26aca000 (fff) get Phys(data[n=5+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:26ad3000 ph data[5]=0:26ad3000 (fff) get Phys(data[n=6+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:26ad4000 ph data[5]=0:26ad3000 (1fff) get Phys(data[n=6+2000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:26ad5000 ph data[5]=0:26ad3000 (2fff) get Phys(data[n=6+3000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:26ad6000 ph data[5]=0:26ad3000 (3fff) get Phys(data[n=6+4000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:26acf000 ph data[6]=0:26acf000 (fff) get Phys(data[n=7+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:26ad0000 ph data[6]=0:26acf000 (1fff) get Phys(data[n=7+2000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:26ad9000 set TERM ph data[7]=0:26ad9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ade0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x8, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ae60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ae60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:1e9b3000 ph data[0]=0:1e9b3000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:1e9b4000 ph data[0]=0:1e9b3000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:1e9ad000 ph data[1]=0:1e9ad000 (fff) get Phys(data[n=2+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:1e9be000 ph data[2]=0:1e9be000 (fff) get Phys(data[n=3+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:1e9bf000 ph data[2]=0:1e9be000 (1fff) get Phys(data[n=3+2000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:1e9c0000 ph data[2]=0:1e9be000 (2fff) get Phys(data[n=3+3000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:1e9c9000 ph data[3]=0:1e9c9000 (fff) get Phys(data[n=4+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:1e9c2000 ph data[4]=0:1e9c2000 (fff) get Phys(data[n=5+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:1e9bb000 ph data[5]=0:1e9bb000 (fff) get Phys(data[n=6+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:1e9bc000 ph data[5]=0:1e9bb000 (1fff) get Phys(data[n=6+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:1e9b5000 ph data[6]=0:1e9b5000 (fff) get Phys(data[n=7+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:1e9c6000 ph data[7]=0:1e9c6000 (fff) get Phys(data[n=8+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:1e9c7000 ph data[7]=0:1e9c6000 (1fff) get Phys(data[n=8+2000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:1e9c8000 ph data[7]=0:1e9c6000 (2fff) get Phys(data[n=8+3000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:1e9d1000 ph data[8]=0:1e9d1000 (fff) get Phys(data[n=9+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:1e9ca000 set TERM ph data[9]=0:1e9ca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ae60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xa, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960aee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960aee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:1e9c3000 ph data[0]=0:1e9c3000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:1e9c4000 ph data[0]=0:1e9c3000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:1e9bd000 ph data[1]=0:1e9bd000 (fff) get Phys(data[n=2+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:1e9ce000 ph data[2]=0:1e9ce000 (fff) get Phys(data[n=3+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:1e9cf000 ph data[2]=0:1e9ce000 (1fff) get Phys(data[n=3+2000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:1e9d0000 ph data[2]=0:1e9ce000 (2fff) get Phys(data[n=3+3000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:1e9d9000 ph data[3]=0:1e9d9000 (fff) get Phys(data[n=4+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:1e9d2000 ph data[4]=0:1e9d2000 (fff) get Phys(data[n=5+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:1e9cb000 ph data[5]=0:1e9cb000 (fff) get Phys(data[n=6+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:1e9cc000 ph data[5]=0:1e9cb000 (1fff) get Phys(data[n=6+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:1e9c5000 ph data[6]=0:1e9c5000 (fff) get Phys(data[n=7+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:1e9d6000 ph data[7]=0:1e9d6000 (fff) get Phys(data[n=8+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:1e9d7000 ph data[7]=0:1e9d6000 (1fff) get Phys(data[n=8+2000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:1e9d8000 ph data[7]=0:1e9d6000 (2fff) get Phys(data[n=8+3000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:1e9e1000 ph data[8]=0:1e9e1000 (fff) get Phys(data[n=9+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:1e9da000 set TERM ph data[9]=0:1e9da000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960aee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xa, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960af60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960af60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:1e9d3000 ph data[0]=0:1e9d3000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:1e9d4000 ph data[0]=0:1e9d3000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:1e9cd000 ph data[1]=0:1e9cd000 (fff) get Phys(data[n=2+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:1e9de000 ph data[2]=0:1e9de000 (fff) get Phys(data[n=3+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:1e9df000 ph data[2]=0:1e9de000 (1fff) get Phys(data[n=3+2000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:1e9e0000 ph data[2]=0:1e9de000 (2fff) get Phys(data[n=3+3000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:1e9e9000 ph data[3]=0:1e9e9000 (fff) get Phys(data[n=4+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:1e9e2000 ph data[4]=0:1e9e2000 (fff) get Phys(data[n=5+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:1e9db000 ph data[5]=0:1e9db000 (fff) get Phys(data[n=6+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:1e9dc000 ph data[5]=0:1e9db000 (1fff) get Phys(data[n=6+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:1e9d5000 ph data[6]=0:1e9d5000 (fff) get Phys(data[n=7+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:1e9e6000 ph data[7]=0:1e9e6000 (fff) get Phys(data[n=8+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:1e9e7000 ph data[7]=0:1e9e6000 (1fff) get Phys(data[n=8+2000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:1e9e8000 ph data[7]=0:1e9e6000 (2fff) get Phys(data[n=8+3000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:1e9f1000 ph data[8]=0:1e9f1000 (fff) get Phys(data[n=9+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:1e9ea000 set TERM ph data[9]=0:1e9ea000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960af60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xa, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960afe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960afe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:1e9e3000 ph data[0]=0:1e9e3000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:1e9e4000 ph data[0]=0:1e9e3000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:1e9dd000 ph data[1]=0:1e9dd000 (fff) get Phys(data[n=2+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:1e9ee000 ph data[2]=0:1e9ee000 (fff) get Phys(data[n=3+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:1e9ef000 ph data[2]=0:1e9ee000 (1fff) get Phys(data[n=3+2000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:1e9f0000 ph data[2]=0:1e9ee000 (2fff) get Phys(data[n=3+3000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:1e9f9000 ph data[3]=0:1e9f9000 (fff) get Phys(data[n=4+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:1e9f2000 ph data[4]=0:1e9f2000 (fff) get Phys(data[n=5+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:1e9eb000 ph data[5]=0:1e9eb000 (fff) get Phys(data[n=6+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:1e9ec000 ph data[5]=0:1e9eb000 (1fff) get Phys(data[n=6+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:1e9e5000 ph data[6]=0:1e9e5000 (fff) get Phys(data[n=7+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:1e9f6000 ph data[7]=0:1e9f6000 (fff) get Phys(data[n=8+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:1e9f7000 ph data[7]=0:1e9f6000 (1fff) get Phys(data[n=8+2000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:1e9f8000 ph data[7]=0:1e9f6000 (2fff) get Phys(data[n=8+3000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:1ea01000 ph data[8]=0:1ea01000 (fff) get Phys(data[n=9+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:1e9fa000 set TERM ph data[9]=0:1e9fa000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960afe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xa, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:15e82000 ph data[0]=0:15e82000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:15e83000 ph data[0]=0:15e82000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:15e8c000 ph data[1]=0:15e8c000 (fff) get Phys(data[n=2+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:15e85000 ph data[2]=0:15e85000 (fff) get Phys(data[n=3+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:15e8e000 ph data[3]=0:15e8e000 (fff) get Phys(data[n=4+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:15e7f000 ph data[4]=0:15e7f000 (fff) get Phys(data[n=5+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:15e88000 ph data[5]=0:15e88000 (fff) get Phys(data[n=6+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:15e91000 ph data[6]=0:15e91000 (fff) get Phys(data[n=7+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:15e8a000 ph data[7]=0:15e8a000 (fff) get Phys(data[n=8+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:15e8b000 ph data[7]=0:15e8a000 (1fff) get Phys(data[n=8+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:15e94000 ph data[8]=0:15e94000 (fff) get Phys(data[n=9+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:15e8d000 ph data[9]=0:15e8d000 (fff) get Phys(data[n=10+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:15e96000 ph data[10]=0:15e96000 (fff) get Phys(data[n=11+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:15e87000 ph data[11]=0:15e87000 (fff) get Phys(data[n=12+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:15e90000 ph data[12]=0:15e90000 (fff) get Phys(data[n=13+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:15e99000 set TERM ph data[13]=0:15e99000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xe, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b0e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b0e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:15e92000 ph data[0]=0:15e92000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:15e93000 ph data[0]=0:15e92000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:15e9c000 ph data[1]=0:15e9c000 (fff) get Phys(data[n=2+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:15e95000 ph data[2]=0:15e95000 (fff) get Phys(data[n=3+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:15e9e000 ph data[3]=0:15e9e000 (fff) get Phys(data[n=4+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:15e8f000 ph data[4]=0:15e8f000 (fff) get Phys(data[n=5+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:15e98000 ph data[5]=0:15e98000 (fff) get Phys(data[n=6+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:15ea1000 ph data[6]=0:15ea1000 (fff) get Phys(data[n=7+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:15e9a000 ph data[7]=0:15e9a000 (fff) get Phys(data[n=8+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:15e9b000 ph data[7]=0:15e9a000 (1fff) get Phys(data[n=8+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:15ea4000 ph data[8]=0:15ea4000 (fff) get Phys(data[n=9+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:15e9d000 ph data[9]=0:15e9d000 (fff) get Phys(data[n=10+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:15ea6000 ph data[10]=0:15ea6000 (fff) get Phys(data[n=11+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:15e97000 ph data[11]=0:15e97000 (fff) get Phys(data[n=12+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:15ea0000 ph data[12]=0:15ea0000 (fff) get Phys(data[n=13+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:15ea9000 set TERM ph data[13]=0:15ea9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdb54 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b0e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xe, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:15ea2000 ph data[0]=0:15ea2000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:15ea3000 ph data[0]=0:15ea2000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:15eac000 ph data[1]=0:15eac000 (fff) get Phys(data[n=2+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:15ea5000 ph data[2]=0:15ea5000 (fff) get Phys(data[n=3+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:15eae000 ph data[3]=0:15eae000 (fff) get Phys(data[n=4+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:15e9f000 ph data[4]=0:15e9f000 (fff) get Phys(data[n=5+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:15ea8000 ph data[5]=0:15ea8000 (fff) get Phys(data[n=6+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:15eb1000 ph data[6]=0:15eb1000 (fff) get Phys(data[n=7+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:15eaa000 ph data[7]=0:15eaa000 (fff) get Phys(data[n=8+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:15eab000 ph data[7]=0:15eaa000 (1fff) get Phys(data[n=8+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:15eb4000 ph data[8]=0:15eb4000 (fff) get Phys(data[n=9+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:15ead000 ph data[9]=0:15ead000 (fff) get Phys(data[n=10+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:15eb6000 ph data[10]=0:15eb6000 (fff) get Phys(data[n=11+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:15ea7000 ph data[11]=0:15ea7000 (fff) get Phys(data[n=12+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:15eb0000 ph data[12]=0:15eb0000 (fff) get Phys(data[n=13+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:15eb9000 set TERM ph data[13]=0:15eb9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b160, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xe, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b1e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b1e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:15eb2000 ph data[0]=0:15eb2000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:15eb3000 ph data[0]=0:15eb2000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:15ebc000 ph data[1]=0:15ebc000 (fff) get Phys(data[n=2+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:15eb5000 ph data[2]=0:15eb5000 (fff) get Phys(data[n=3+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:15ebe000 ph data[3]=0:15ebe000 (fff) get Phys(data[n=4+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:15eaf000 ph data[4]=0:15eaf000 (fff) get Phys(data[n=5+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:15eb8000 ph data[5]=0:15eb8000 (fff) get Phys(data[n=6+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:15ec1000 ph data[6]=0:15ec1000 (fff) get Phys(data[n=7+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:15eba000 ph data[7]=0:15eba000 (fff) get Phys(data[n=8+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:15ebb000 ph data[7]=0:15eba000 (1fff) get Phys(data[n=8+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:15ec4000 ph data[8]=0:15ec4000 (fff) get Phys(data[n=9+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:15ebd000 ph data[9]=0:15ebd000 (fff) get Phys(data[n=10+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:15ec6000 ph data[10]=0:15ec6000 (fff) get Phys(data[n=11+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:15eb7000 ph data[11]=0:15eb7000 (fff) get Phys(data[n=12+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:15ec0000 ph data[12]=0:15ec0000 (fff) get Phys(data[n=13+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:15ec9000 set TERM ph data[13]=0:15ec9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b1e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xe, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b err:(dll/win32/shell32/CDefaultContextMenu.cpp:389) IShellExtInit::Initialize failed.clsid {2690b74f-f353-422d-bb12-401581eef8f1} hr 0x80004005 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b WARNING: NtUserLockWindowUpdate at win32ss/user/ntuser/ntstubs.c:950 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4a30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4a30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01ccb000 ph data[0]=0:1ccb000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:01ed4000 ph data[1]=0:1ed4000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01e9d000 ph data[2]=0:1e9d000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0204e000 ph data[3]=0:204e000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01ea7000 ph data[4]=0:1ea7000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01ff0000 ph data[5]=0:1ff0000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01d69000 ph data[6]=0:1d69000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:01f2a000 ph data[7]=0:1f2a000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01cc3000 ph data[8]=0:1cc3000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:01ecc000 ph data[9]=0:1ecc000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01ead000 ph data[10]=0:1ead000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:02056000 ph data[11]=0:2056000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01eaf000 ph data[12]=0:1eaf000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01fe8000 ph data[13]=0:1fe8000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01dc1000 ph data[14]=0:1dc1000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:01f32000 set TERM ph data[15]=0:1f32000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4a30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4ab0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4ab0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01cbb000 ph data[0]=0:1cbb000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:01ec4000 ph data[1]=0:1ec4000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01f35000 ph data[2]=0:1f35000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0205e000 ph data[3]=0:205e000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01eb7000 ph data[4]=0:1eb7000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01f40000 ph data[5]=0:1f40000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01cf1000 ph data[6]=0:1cf1000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:01eba000 ph data[7]=0:1eba000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01cd3000 ph data[8]=0:1cd3000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:01edc000 ph data[9]=0:1edc000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01ebd000 ph data[10]=0:1ebd000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:02066000 ph data[11]=0:2066000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01ebf000 ph data[12]=0:1ebf000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01f48000 ph data[13]=0:1f48000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01f09000 ph data[14]=0:1f09000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:01f8a000 set TERM ph data[15]=0:1f8a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4b30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4b30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01cdb000 ph data[0]=0:1cdb000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01ee4000 ph data[1]=0:1ee4000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01ec5000 ph data[2]=0:1ec5000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:021be000 ph data[3]=0:21be000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01f07000 ph data[4]=0:1f07000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02010000 ph data[5]=0:2010000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0b939000 ph data[6]=0:b939000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:65f72000 ph data[7]=0:65f72000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01ef3000 ph data[8]=0:1ef3000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01fac000 ph data[9]=0:1fac000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01f8d000 ph data[10]=0:1f8d000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:3f84e000 ph data[11]=0:3f84e000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:afc47000 ph data[12]=0:afc47000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0c038000 ph data[13]=0:c038000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0ba41000 ph data[14]=0:ba41000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:65f82000 set TERM ph data[15]=0:65f82000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4bb0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4bb0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01e7b000 ph data[0]=0:1e7b000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01fb4000 ph data[1]=0:1fb4000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bde5000 ph data[2]=0:bde5000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afc66000 ph data[3]=0:afc66000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0bda7000 ph data[4]=0:bda7000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0bbf0000 ph data[5]=0:bbf0000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0b921000 ph data[6]=0:b921000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:afe32000 ph data[7]=0:afe32000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b913000 ph data[8]=0:b913000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0ba8c000 ph data[9]=0:ba8c000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:38b35000 ph data[10]=0:38b35000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0bfce000 ph data[11]=0:bfce000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0b99f000 ph data[12]=0:b99f000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0bc48000 ph data[13]=0:bc48000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afe41000 ph data[14]=0:afe41000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0ba4a000 set TERM ph data[15]=0:ba4a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960f260, OrigWordsRequested 0xf00, DevSize 0xf IdeReadWrite (REQ): Starting sector is 3960f260, Number of WORDS 0xf00, DevSize 0xf AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 1e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:afc63000 ph data[0]=0:afc63000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bc3c000 set TERM ph data[1]=0:bc3c000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf992c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4ab0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4b30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4bb0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f260, Count 0xf(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4a30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4a30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0b93f000 ph data[0]=0:b93f000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0bb30000 ph data[1]=0:bb30000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01e31000 ph data[2]=0:1e31000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:02062000 ph data[3]=0:2062000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01e93000 ph data[4]=0:1e93000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0ba5c000 ph data[5]=0:ba5c000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:020e5000 ph data[6]=0:20e5000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:021c6000 ph data[7]=0:21c6000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01f57000 ph data[8]=0:1f57000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:02168000 ph data[9]=0:2168000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01e39000 ph data[10]=0:1e39000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0206a000 ph data[11]=0:206a000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01e9b000 ph data[12]=0:1e9b000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0207c000 ph data[13]=0:207c000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:020ed000 ph data[14]=0:20ed000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:02106000 set TERM ph data[15]=0:2106000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4ab0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4ab0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01f5f000 ph data[0]=0:1f5f000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:020f0000 ph data[1]=0:20f0000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01ef9000 ph data[2]=0:1ef9000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:02072000 ph data[3]=0:2072000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01ea3000 ph data[4]=0:1ea3000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:02004000 ph data[5]=0:2004000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:020f5000 ph data[6]=0:20f5000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:02046000 ph data[7]=0:2046000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:020e7000 ph data[8]=0:20e7000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:020f8000 ph data[9]=0:20f8000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01ec9000 ph data[10]=0:1ec9000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01ffa000 ph data[11]=0:1ffa000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01eab000 ph data[12]=0:1eab000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0200c000 ph data[13]=0:200c000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:020fd000 ph data[14]=0:20fd000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:01fce000 set TERM ph data[15]=0:1fce000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4b30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4b30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:020ef000 ph data[0]=0:20ef000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02078000 ph data[1]=0:2078000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01ed1000 ph data[2]=0:1ed1000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:02002000 ph data[3]=0:2002000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01eb3000 ph data[4]=0:1eb3000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02014000 ph data[5]=0:2014000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0207d000 ph data[6]=0:207d000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:01fd6000 ph data[7]=0:1fd6000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:020f7000 ph data[8]=0:20f7000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:02080000 ph data[9]=0:2080000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01ed9000 ph data[10]=0:1ed9000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0200a000 ph data[11]=0:200a000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01f7b000 ph data[12]=0:1f7b000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0201c000 ph data[13]=0:201c000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02005000 ph data[14]=0:2005000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:01fde000 set TERM ph data[15]=0:1fde000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4bb0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4bb0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:020ff000 ph data[0]=0:20ff000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:02088000 ph data[1]=0:2088000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01ee1000 ph data[2]=0:1ee1000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:02012000 ph data[3]=0:2012000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01f83000 ph data[4]=0:1f83000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02024000 ph data[5]=0:2024000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0200d000 ph data[6]=0:200d000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01fe6000 ph data[7]=0:1fe6000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:02107000 ph data[8]=0:2107000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:02090000 ph data[9]=0:2090000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01f21000 ph data[10]=0:1f21000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01f9a000 ph data[11]=0:1f9a000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01f03000 ph data[12]=0:1f03000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0202c000 ph data[13]=0:202c000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02015000 ph data[14]=0:2015000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:01fee000 set TERM ph data[15]=0:1fee000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered f00, WordsLeft f00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1e00, full size 1e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=4 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4a30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665630 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4ab0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf766581c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4b30, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5e1d4b0 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4bb0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e1d4b0, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01fa7000 ph data[0]=0:1fa7000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:01fb0000 ph data[1]=0:1fb0000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01e09000 ph data[2]=0:1e09000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:020ba000 ph data[3]=0:20ba000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01f2b000 ph data[4]=0:1f2b000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:020e4000 ph data[5]=0:20e4000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01ffd000 ph data[6]=0:1ffd000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:020d6000 ph data[7]=0:20d6000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01faf000 ph data[8]=0:1faf000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:02140000 ph data[9]=0:2140000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01e11000 ph data[10]=0:1e11000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:020c2000 ph data[11]=0:20c2000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01f33000 ph data[12]=0:1f33000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:020ec000 ph data[13]=0:20ec000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:020cd000 ph data[14]=0:20cd000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:020de000 set TERM ph data[15]=0:20de000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4460, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb44e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb44e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01fb7000 ph data[0]=0:1fb7000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:02148000 ph data[1]=0:2148000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01e19000 ph data[2]=0:1e19000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:020ca000 ph data[3]=0:20ca000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01ebb000 ph data[4]=0:1ebb000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:020f4000 ph data[5]=0:20f4000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:020d5000 ph data[6]=0:20d5000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:020e6000 ph data[7]=0:20e6000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01fbf000 ph data[8]=0:1fbf000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:02150000 ph data[9]=0:2150000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01e21000 ph data[10]=0:1e21000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:020d2000 ph data[11]=0:20d2000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01fcb000 ph data[12]=0:1fcb000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:020fc000 ph data[13]=0:20fc000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:020dd000 ph data[14]=0:20dd000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:020ee000 set TERM ph data[15]=0:20ee000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01fc7000 ph data[0]=0:1fc7000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02158000 ph data[1]=0:2158000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01ee9000 ph data[2]=0:1ee9000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0201a000 ph data[3]=0:201a000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01fd3000 ph data[4]=0:1fd3000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02104000 ph data[5]=0:2104000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0201d000 ph data[6]=0:201d000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:020f6000 ph data[7]=0:20f6000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01fcf000 ph data[8]=0:1fcf000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:02160000 ph data[9]=0:2160000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01ef1000 ph data[10]=0:1ef1000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01f62000 ph data[11]=0:1f62000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01fdb000 ph data[12]=0:1fdb000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01fbc000 ph data[13]=0:1fbc000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02025000 ph data[14]=0:2025000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:020fe000 set TERM ph data[15]=0:20fe000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb45e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb45e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:02097000 ph data[0]=0:2097000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:020a0000 ph data[1]=0:20a0000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01e79000 ph data[2]=0:1e79000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01f6a000 ph data[3]=0:1f6a000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01fe3000 ph data[4]=0:1fe3000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02044000 ph data[5]=0:2044000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0202d000 ph data[6]=0:202d000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01ffe000 ph data[7]=0:1ffe000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0209f000 ph data[8]=0:209f000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:02170000 ph data[9]=0:2170000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01e81000 ph data[10]=0:1e81000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01f72000 ph data[11]=0:1f72000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01feb000 ph data[12]=0:1feb000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0204c000 ph data[13]=0:204c000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02035000 ph data[14]=0:2035000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:02086000 set TERM ph data[15]=0:2086000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb44e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4560, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9924 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb45e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf050 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b00000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:02027000 ph data[0]=0:2027000 (fff) get Phys(data[n=1+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:02178000 ph data[1]=0:2178000 (fff) get Phys(data[n=2+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:02009000 ph data[2]=0:2009000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0203a000 ph data[3]=0:203a000 (fff) get Phys(data[n=4+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01ff3000 ph data[4]=0:1ff3000 (fff) get Phys(data[n=5+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:02054000 ph data[5]=0:2054000 (fff) get Phys(data[n=6+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01f75000 ph data[6]=0:1f75000 (fff) get Phys(data[n=7+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0200e000 ph data[7]=0:200e000 (fff) get Phys(data[n=8+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0202f000 ph data[8]=0:202f000 (fff) get Phys(data[n=9+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:020b8000 ph data[9]=0:20b8000 (fff) get Phys(data[n=10+1000]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:02011000 ph data[10]=0:2011000 (fff) get Phys(data[n=11+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:02042000 ph data[11]=0:2042000 (fff) get Phys(data[n=12+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:020c3000 ph data[12]=0:20c3000 (fff) get Phys(data[n=13+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0205c000 ph data[13]=0:205c000 (fff) get Phys(data[n=14+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02045000 ph data[14]=0:2045000 (fff) get Phys(data[n=15+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:02016000 set TERM ph data[15]=0:2016000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4860, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf050 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb48e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb48e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b10000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:02037000 ph data[0]=0:2037000 (fff) get Phys(data[n=1+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:020c0000 ph data[1]=0:20c0000 (fff) get Phys(data[n=2+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:02019000 ph data[2]=0:2019000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0204a000 ph data[3]=0:204a000 (fff) get Phys(data[n=4+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:020cb000 ph data[4]=0:20cb000 (fff) get Phys(data[n=5+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:02064000 ph data[5]=0:2064000 (fff) get Phys(data[n=6+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0204d000 ph data[6]=0:204d000 (fff) get Phys(data[n=7+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0201e000 ph data[7]=0:201e000 (fff) get Phys(data[n=8+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0203f000 ph data[8]=0:203f000 (fff) get Phys(data[n=9+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:020c8000 ph data[9]=0:20c8000 (fff) get Phys(data[n=10+1000]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:02021000 ph data[10]=0:2021000 (fff) get Phys(data[n=11+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02052000 ph data[11]=0:2052000 (fff) get Phys(data[n=12+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01f4b000 ph data[12]=0:1f4b000 (fff) get Phys(data[n=13+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0206c000 ph data[13]=0:206c000 (fff) get Phys(data[n=14+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:02055000 ph data[14]=0:2055000 (fff) get Phys(data[n=15+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02026000 set TERM ph data[15]=0:2026000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf050 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b20000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02047000 ph data[0]=0:2047000 (fff) get Phys(data[n=1+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:020d0000 ph data[1]=0:20d0000 (fff) get Phys(data[n=2+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01f69000 ph data[2]=0:1f69000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01f5a000 ph data[3]=0:1f5a000 (fff) get Phys(data[n=4+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01f53000 ph data[4]=0:1f53000 (fff) get Phys(data[n=5+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:02074000 ph data[5]=0:2074000 (fff) get Phys(data[n=6+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01f55000 ph data[6]=0:1f55000 (fff) get Phys(data[n=7+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0202e000 ph data[7]=0:202e000 (fff) get Phys(data[n=8+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0204f000 ph data[8]=0:204f000 (fff) get Phys(data[n=9+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:020d8000 ph data[9]=0:20d8000 (fff) get Phys(data[n=10+1000]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01f71000 ph data[10]=0:1f71000 (fff) get Phys(data[n=11+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:021b2000 ph data[11]=0:21b2000 (fff) get Phys(data[n=12+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01f5b000 ph data[12]=0:1f5b000 (fff) get Phys(data[n=13+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0203c000 ph data[13]=0:203c000 (fff) get Phys(data[n=14+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01f5d000 ph data[14]=0:1f5d000 (fff) get Phys(data[n=15+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02036000 set TERM ph data[15]=0:2036000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf050 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb49e0, OrigWordsRequested 0x4500, DevSize 0x45 IdeReadWrite (REQ): Starting sector is 38fb49e0, Number of WORDS 0x4500, DevSize 0x45 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b30000, count 8a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:02017000 ph data[0]=0:2017000 (fff) get Phys(data[n=1+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01fe0000 ph data[1]=0:1fe0000 (fff) get Phys(data[n=2+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:02039000 ph data[2]=0:2039000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:021ba000 ph data[3]=0:21ba000 (fff) get Phys(data[n=4+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01f63000 ph data[4]=0:1f63000 (fff) get Phys(data[n=5+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:020a4000 ph data[5]=0:20a4000 (fff) get Phys(data[n=6+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01f65000 ph data[6]=0:1f65000 (fff) get Phys(data[n=7+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0029e000 ph data[7]=0:29e000 (fff) get Phys(data[n=8+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0201f000 set TERM ph data[8]=0:201f000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a14 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb48e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4960, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf993c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb49e0, Count 0x45(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4500, WordsLeft 4500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8a00, full size 8a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01f73000 ph data[0]=0:1f73000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0216c000 ph data[1]=0:216c000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:020a5000 ph data[2]=0:20a5000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:02186000 ph data[3]=0:2186000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01f67000 ph data[4]=0:1f67000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:020b0000 ph data[5]=0:20b0000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01f89000 ph data[6]=0:1f89000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:021ca000 ph data[7]=0:21ca000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0203b000 ph data[8]=0:203b000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:02174000 ph data[9]=0:2174000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:02155000 ph data[10]=0:2155000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0218e000 ph data[11]=0:218e000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01f6f000 ph data[12]=0:1f6f000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:00298000 ph data[13]=0:298000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01f91000 ph data[14]=0:1f91000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0214a000 set TERM ph data[15]=0:214a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4460, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb44e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb44e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:02043000 ph data[0]=0:2043000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0217c000 ph data[1]=0:217c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0215d000 ph data[2]=0:215d000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:02196000 ph data[3]=0:2196000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01f77000 ph data[4]=0:1f77000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:00290000 ph data[5]=0:290000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01f99000 ph data[6]=0:1f99000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:02152000 ph data[7]=0:2152000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0204b000 ph data[8]=0:204b000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:02184000 ph data[9]=0:2184000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:02165000 ph data[10]=0:2165000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0211e000 ph data[11]=0:211e000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01f7f000 ph data[12]=0:1f7f000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:00288000 ph data[13]=0:288000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01fa1000 ph data[14]=0:1fa1000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0215a000 set TERM ph data[15]=0:215a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb04 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb44e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:02053000 ph data[0]=0:2053000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0218c000 ph data[1]=0:218c000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0205d000 ph data[2]=0:205d000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:02126000 ph data[3]=0:2126000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01f87000 ph data[4]=0:1f87000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:00280000 ph data[5]=0:280000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02029000 ph data[6]=0:2029000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0205a000 ph data[7]=0:205a000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0205b000 ph data[7]=0:205a000 (1fff) get Phys(data[n=8+2000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01ffc000 ph data[8]=0:1ffc000 (fff) get Phys(data[n=9+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:02065000 ph data[9]=0:2065000 (fff) get Phys(data[n=10+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0212e000 ph data[10]=0:212e000 (fff) get Phys(data[n=11+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01f8f000 ph data[11]=0:1f8f000 (fff) get Phys(data[n=12+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:00278000 ph data[12]=0:278000 (fff) get Phys(data[n=13+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02031000 ph data[13]=0:2031000 (fff) get Phys(data[n=14+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:01fa2000 set TERM ph data[14]=0:1fa2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb04 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4560, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb45e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb45e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:02063000 ph data[0]=0:2063000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01f44000 ph data[1]=0:1f44000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0206d000 ph data[2]=0:206d000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0203e000 ph data[3]=0:203e000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01fd7000 ph data[4]=0:1fd7000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:020e0000 ph data[5]=0:20e0000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01fb9000 ph data[6]=0:1fb9000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:01faa000 ph data[7]=0:1faa000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0206b000 ph data[8]=0:206b000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:01f4c000 ph data[9]=0:1f4c000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:02075000 ph data[10]=0:2075000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0217e000 ph data[11]=0:217e000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01fdf000 ph data[12]=0:1fdf000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:02068000 ph data[13]=0:2068000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01fc1000 ph data[14]=0:1fc1000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:01fb2000 set TERM ph data[15]=0:1fb2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeb04 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb45e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf050 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b00000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:02073000 ph data[0]=0:2073000 (fff) get Phys(data[n=1+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:01f54000 ph data[1]=0:1f54000 (fff) get Phys(data[n=2+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01fb5000 ph data[2]=0:1fb5000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:002ce000 ph data[3]=0:2ce000 (fff) get Phys(data[n=4+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:02067000 ph data[4]=0:2067000 (fff) get Phys(data[n=5+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:02070000 ph data[5]=0:2070000 (fff) get Phys(data[n=6+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01f49000 ph data[6]=0:1f49000 (fff) get Phys(data[n=7+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01f3a000 ph data[7]=0:1f3a000 (fff) get Phys(data[n=8+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01ffb000 ph data[8]=0:1ffb000 (fff) get Phys(data[n=9+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:01f5c000 ph data[9]=0:1f5c000 (fff) get Phys(data[n=10+1000]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01f3d000 ph data[10]=0:1f3d000 (fff) get Phys(data[n=11+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:002c6000 ph data[11]=0:2c6000 (fff) get Phys(data[n=12+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0206f000 ph data[12]=0:206f000 (fff) get Phys(data[n=13+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:01fb8000 ph data[13]=0:1fb8000 (fff) get Phys(data[n=14+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01f51000 ph data[14]=0:1f51000 (fff) get Phys(data[n=15+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01f42000 set TERM ph data[15]=0:1f42000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4860, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf050 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb48e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb48e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b10000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:02003000 ph data[0]=0:2003000 (fff) get Phys(data[n=1+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:01f64000 ph data[1]=0:1f64000 (fff) get Phys(data[n=2+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01f45000 ph data[2]=0:1f45000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:002be000 ph data[3]=0:2be000 (fff) get Phys(data[n=4+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:02077000 ph data[4]=0:2077000 (fff) get Phys(data[n=5+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01fc0000 ph data[5]=0:1fc0000 (fff) get Phys(data[n=6+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01f59000 ph data[6]=0:1f59000 (fff) get Phys(data[n=7+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01f4a000 ph data[7]=0:1f4a000 (fff) get Phys(data[n=8+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01f8b000 ph data[8]=0:1f8b000 (fff) get Phys(data[n=9+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:01f6c000 ph data[9]=0:1f6c000 (fff) get Phys(data[n=10+1000]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01f4d000 ph data[10]=0:1f4d000 (fff) get Phys(data[n=11+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:002b6000 ph data[11]=0:2b6000 (fff) get Phys(data[n=12+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0207f000 ph data[12]=0:207f000 (fff) get Phys(data[n=13+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:01fc8000 ph data[13]=0:1fc8000 (fff) get Phys(data[n=14+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01f61000 ph data[14]=0:1f61000 (fff) get Phys(data[n=15+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:01f52000 set TERM ph data[15]=0:1f52000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf050 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb4960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b20000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01f93000 ph data[0]=0:1f93000 (fff) get Phys(data[n=1+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:01f74000 ph data[1]=0:1f74000 (fff) get Phys(data[n=2+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0216d000 ph data[2]=0:216d000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:002ae000 ph data[3]=0:2ae000 (fff) get Phys(data[n=4+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:02087000 ph data[4]=0:2087000 (fff) get Phys(data[n=5+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01fd0000 ph data[5]=0:1fd0000 (fff) get Phys(data[n=6+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01fa9000 ph data[6]=0:1fa9000 (fff) get Phys(data[n=7+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:02162000 ph data[7]=0:2162000 (fff) get Phys(data[n=8+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01f9b000 ph data[8]=0:1f9b000 (fff) get Phys(data[n=9+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02114000 ph data[9]=0:2114000 (fff) get Phys(data[n=10+1000]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:02175000 ph data[10]=0:2175000 (fff) get Phys(data[n=11+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:002a6000 ph data[11]=0:2a6000 (fff) get Phys(data[n=12+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0208f000 ph data[12]=0:208f000 (fff) get Phys(data[n=13+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01fd8000 ph data[13]=0:1fd8000 (fff) get Phys(data[n=14+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01fb1000 ph data[14]=0:1fb1000 (fff) get Phys(data[n=15+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02082000 set TERM ph data[15]=0:2082000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef24 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb48e0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf050 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb49e0, OrigWordsRequested 0x4500, DevSize 0x45 IdeReadWrite (REQ): Starting sector is 38fb49e0, Number of WORDS 0x4500, DevSize 0x45 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b30000, count 8a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01fa3000 ph data[0]=0:1fa3000 (fff) get Phys(data[n=1+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0211c000 ph data[1]=0:211c000 (fff) get Phys(data[n=2+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0217d000 ph data[2]=0:217d000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:02136000 ph data[3]=0:2136000 (fff) get Phys(data[n=4+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:02057000 ph data[4]=0:2057000 (fff) get Phys(data[n=5+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:00270000 ph data[5]=0:270000 (fff) get Phys(data[n=6+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01f39000 ph data[6]=0:1f39000 (fff) get Phys(data[n=7+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0208a000 ph data[7]=0:208a000 (fff) get Phys(data[n=8+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01fab000 set TERM ph data[8]=0:1fab000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4960, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb49e0, Count 0x45(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4500, WordsLeft 4500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8a00, full size 8a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb43c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb43c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bae000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:0217f000 ph data[0]=0:217f000 (fff) get Phys(data[n=1+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:02120000 ph data[1]=0:2120000 (fff) get Phys(data[n=2+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:01e91000 ph data[2]=0:1e91000 (fff) get Phys(data[n=3+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:020a2000 ph data[3]=0:20a2000 (fff) get Phys(data[n=4+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:01f3b000 ph data[4]=0:1f3b000 (fff) get Phys(data[n=5+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:02194000 ph data[5]=0:2194000 (fff) get Phys(data[n=6+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:020ad000 ph data[6]=0:20ad000 (fff) get Phys(data[n=7+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:002f6000 ph data[7]=0:2f6000 (fff) get Phys(data[n=8+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:02187000 ph data[8]=0:2187000 (fff) get Phys(data[n=9+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:02128000 ph data[9]=0:2128000 (fff) get Phys(data[n=10+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:01e99000 ph data[10]=0:1e99000 (fff) get Phys(data[n=11+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:020aa000 ph data[11]=0:20aa000 (fff) get Phys(data[n=12+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:01f43000 ph data[12]=0:1f43000 (fff) get Phys(data[n=13+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:0219c000 ph data[13]=0:219c000 (fff) get Phys(data[n=14+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:020b5000 ph data[14]=0:20b5000 (fff) get Phys(data[n=15+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:002ee000 set TERM ph data[15]=0:2ee000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb43c0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4440, OrigWordsRequested 0x1300, DevSize 0x13 IdeReadWrite (REQ): Starting sector is 38fb4440, Number of WORDS 0x1300, DevSize 0x13 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6bbe000, count 2600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:0218f000 ph data[0]=0:218f000 (fff) get Phys(data[n=1+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:021e8000 ph data[1]=0:21e8000 (fff) get Phys(data[n=2+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:01ea1000 set TERM ph data[2]=0:1ea1000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4440, Count 0x13(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x3, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1300, WordsLeft 1300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2600, full size 2600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb43c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fb43c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6bae000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6bae000) AtapiVirtToPhysAddr_: f6bae000 -> 00000000:0209b000 ph data[0]=0:209b000 (fff) get Phys(data[n=1+1000]=f6baf000) AtapiVirtToPhysAddr_: f6baf000 -> 00000000:002bc000 ph data[1]=0:2bc000 (fff) get Phys(data[n=2+1000]=f6bb0000) AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:002cd000 ph data[2]=0:2cd000 (fff) get Phys(data[n=3+1000]=f6bb1000) AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:0027e000 ph data[3]=0:27e000 (fff) get Phys(data[n=4+1000]=f6bb2000) AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:0026f000 ph data[4]=0:26f000 (fff) get Phys(data[n=5+1000]=f6bb3000) AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:00218000 ph data[5]=0:218000 (fff) get Phys(data[n=6+1000]=f6bb4000) AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:01ff1000 ph data[6]=0:1ff1000 (fff) get Phys(data[n=7+1000]=f6bb5000) AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:021f2000 ph data[7]=0:21f2000 (fff) get Phys(data[n=8+1000]=f6bb6000) AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:020a3000 ph data[8]=0:20a3000 (fff) get Phys(data[n=9+1000]=f6bb7000) AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:002b4000 ph data[9]=0:2b4000 (fff) get Phys(data[n=10+1000]=f6bb8000) AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:002c5000 ph data[10]=0:2c5000 (fff) get Phys(data[n=11+1000]=f6bb9000) AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:00276000 ph data[11]=0:276000 (fff) get Phys(data[n=12+1000]=f6bba000) AtapiVirtToPhysAddr_: f6bba000 -> 00000000:00267000 ph data[12]=0:267000 (fff) get Phys(data[n=13+1000]=f6bbb000) AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:00210000 ph data[13]=0:210000 (fff) get Phys(data[n=14+1000]=f6bbc000) AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:020b9000 ph data[14]=0:20b9000 (fff) get Phys(data[n=15+1000]=f6bbd000) AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:021fa000 set TERM ph data[15]=0:21fa000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb43c0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec30 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4440, OrigWordsRequested 0x1300, DevSize 0x13 IdeReadWrite (REQ): Starting sector is 38fb4440, Number of WORDS 0x1300, DevSize 0x13 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6bbe000, count 2600, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6bbe000) AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:021a3000 ph data[0]=0:21a3000 (fff) get Phys(data[n=1+1000]=f6bbf000) AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:002ac000 ph data[1]=0:2ac000 (fff) get Phys(data[n=2+1000]=f6bc0000) AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:002bd000 set TERM ph data[2]=0:2bd000 (5ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4440, Count 0x13(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x3, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1300, WordsLeft 1300 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2600, full size 2600 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec80 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4350, OrigWordsRequested 0x6900, DevSize 0x69 IdeReadWrite (REQ): Starting sector is 38fb4350, Number of WORDS 0x6900, DevSize 0x69 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count d200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:0027d000 ph data[0]=0:27d000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:00236000 ph data[1]=0:236000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:021a7000 ph data[2]=0:21a7000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:02318000 ph data[3]=0:2318000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:020a1000 ph data[4]=0:20a1000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:0029a000 ph data[5]=0:29a000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:0216b000 ph data[6]=0:216b000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:0026c000 ph data[7]=0:26c000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:02095000 ph data[8]=0:2095000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:0022e000 ph data[9]=0:22e000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:021af000 ph data[10]=0:21af000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:02320000 ph data[11]=0:2320000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:02171000 ph data[12]=0:2171000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:021a2000 set TERM ph data[13]=0:21a2000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4350, Count 0x69(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xe, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 6900, WordsLeft 6900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered d200, full size d200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec80 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4350, OrigWordsRequested 0x6900, DevSize 0x69 IdeReadWrite (REQ): Starting sector is 38fb4350, Number of WORDS 0x6900, DevSize 0x69 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count d200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:021a9000 ph data[0]=0:21a9000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:01fca000 ph data[1]=0:1fca000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:0212b000 ph data[2]=0:212b000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:01fe4000 ph data[3]=0:1fe4000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:01fcd000 ph data[4]=0:1fcd000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:0237e000 ph data[5]=0:237e000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:020b7000 ph data[6]=0:20b7000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:02188000 ph data[7]=0:2188000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:02131000 ph data[8]=0:2131000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:02122000 ph data[9]=0:2122000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:02133000 ph data[10]=0:2133000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:01fec000 ph data[11]=0:1fec000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:0212d000 ph data[12]=0:212d000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:02386000 set TERM ph data[13]=0:2386000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4350, Count 0x69(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xe, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 6900, WordsLeft 6900 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered d200, full size d200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec80 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb5830, OrigWordsRequested 0x3e00, DevSize 0x3e IdeReadWrite (REQ): Starting sector is 38fb5830, Number of WORDS 0x3e00, DevSize 0x3e AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b52000, count 7c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:0200b000 ph data[0]=0:200b000 (fff) get Phys(data[n=1+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:021cc000 ph data[1]=0:21cc000 (fff) get Phys(data[n=2+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:00235000 ph data[2]=0:235000 (fff) get Phys(data[n=3+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:020ae000 ph data[3]=0:20ae000 (fff) get Phys(data[n=4+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:0214f000 ph data[4]=0:214f000 (fff) get Phys(data[n=5+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:02110000 ph data[5]=0:2110000 (fff) get Phys(data[n=6+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:01fe1000 ph data[6]=0:1fe1000 (fff) get Phys(data[n=7+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:00252000 set TERM ph data[7]=0:252000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb5830, Count 0x3e(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3e00, WordsLeft 3e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 7c00, full size 7c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbec80 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb5830, OrigWordsRequested 0x3e00, DevSize 0x3e IdeReadWrite (REQ): Starting sector is 38fb5830, Number of WORDS 0x3e00, DevSize 0x3e AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b52000, count 7c00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:020d3000 ph data[0]=0:20d3000 (fff) get Phys(data[n=1+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:02394000 ph data[1]=0:2394000 (fff) get Phys(data[n=2+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:01fd5000 ph data[2]=0:1fd5000 (fff) get Phys(data[n=3+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:023d6000 ph data[3]=0:23d6000 (fff) get Phys(data[n=4+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:0021f000 ph data[4]=0:21f000 (fff) get Phys(data[n=5+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:02940000 ph data[5]=0:2940000 (fff) get Phys(data[n=6+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:021b1000 ph data[6]=0:21b1000 (fff) get Phys(data[n=7+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:01fd2000 set TERM ph data[7]=0:1fd2000 (bff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb5830, Count 0x3e(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3e00, WordsLeft 3e00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 7c00, full size 7c00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0210f000 ph data[0]=0:210f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02098000 set TERM ph data[1]=0:2098000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:285ef000 ph data[0]=0:285ef000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:28468000 set TERM ph data[1]=0:28468000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbed00 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac340, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac340, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0258f000 ph data[0]=0:258f000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02410000 set TERM ph data[1]=0:2410000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac340, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf174 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac360, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac360, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:01f57000 ph data[0]=0:1f57000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02380000 set TERM ph data[1]=0:2380000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac360, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02167000 ph data[0]=0:2167000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:021a8000 set TERM ph data[1]=0:21a8000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:020d7000 ph data[0]=0:20d7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:02398000 set TERM ph data[1]=0:2398000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e87b0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 395e87b0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02137000 set TERM ph data[0]=0:2137000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e87b0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DBAC0, B64BD778, B5DDDDF0, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \RECYCLED\INFO2, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \RECYCLED, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:561) NTFS write-support is EXPERIMENTAL and is disabled by default! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:020a7000 ph data[0]=0:20a7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:002a0000 set TERM ph data[1]=0:2a0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbecec ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e8790, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8790, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0bda7000 ph data[0]=0:bda7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:0bbf0000 set TERM ph data[1]=0:bbf0000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8790, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf230 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 395e87b0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 395e87b0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:00267000 set TERM ph data[0]=0:267000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e87b0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DBAC0, B64BD778, B5DDDDF0, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \RECYCLED\INFO2, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \RECYCLED, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, RECYCLED, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:561) NTFS write-support is EXPERIMENTAL and is disabled by default! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960f460, OrigWordsRequested 0x500, DevSize 0x5 IdeReadWrite (REQ): Starting sector is 3960f460, Number of WORDS 0x500, DevSize 0x5 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c40000, count a00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:02187000 set TERM ph data[0]=0:2187000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f460, Count 0x5(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DBAC0, B64BD778, B5DDDDF0, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DBAC0, B64BD778, B5EA1BA8, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 500, WordsLeft 500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a00, full size a00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb64ca6d8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x1, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x1 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0x6017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0x50 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DBAC0, B64BD778, B5EA1BA8, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BD830, B5E1F028, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BD830, B61DBAC0, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5c00a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 5c00a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5c608 set TERM ph data[0]=0:8d5c608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5c00a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64ca6d8, CDB 0xb64ca708, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64ca6d8 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 920, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 920, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x920, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64ca6d8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64ca6d8, status 1 AtapiInterrupt: RequestComplete, srb 0xb64ca6d8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5E1F028, \, FALSE, F6FBF948) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:139) NtfsGetNameInformation(B5E1F028, B61DA008, B64BC778, B5DDDDF0, F6FBFB4C) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DA008, B64BC778, B5EA1BA8, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5E1F028, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BC830, B61DA008, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 71300a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 71300a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5a608 set TERM ph data[0]=0:8d5a608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x71300a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 113120, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 113120, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x113120, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, F6FBFC14, \, FALSE, F6FBF8B0) (drivers/filesystems/ntfs/finfo.c:430) NtfsQueryInformation(B6211538) (drivers/filesystems/ntfs/finfo.c:105) NtfsGetBasicInformation(F6FBFC14, B61DA008, B64BC778, B5EA1BA8, F6FBF850) (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called (drivers/filesystems/ntfs/create.c:258) NtfsOpenFile(B64BC830, B5E1F028, \autorun.inf, FALSE, F6FBF934) (drivers/filesystems/ntfs/fcb.c:524) NtfsDirFindFile(B64BC830, B61DA008, autorun.inf, FALSE, F6FBF48C) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbef5c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 71300a, OrigWordsRequested 0x200, DevSize 0x2 IdeReadWrite (REQ): Starting sector is 71300a, Number of WORDS 0x200, DevSize 0x2 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051608, count 400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051608) AtapiVirtToPhysAddr_: f7051608 -> 00000000:08d5a608 set TERM ph data[0]=0:8d5a608 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x71300a, Count 0x2(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 200, WordsLeft 200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 400, full size 400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb64be670 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbeea4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 113120, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 113120, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f7051000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051000) AtapiVirtToPhysAddr_: f7051000 -> 00000000:08529000 set TERM ph data[0]=0:8529000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x113120, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b64be670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb64be670, status 1 AtapiInterrupt: RequestComplete, srb 0xb64be670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5e1d4e0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e1d4e0 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e1d4b0, status 4 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5e1d4e0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e1d4e0 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e1d4b0, status 4 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5e1d4e0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e1d4e0 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e1d4b0, status 4 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5e1d4e0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e1d4e0 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e1d4b0, status 4 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5e1d4e0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e1d4e0 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e1d4b0, status 4 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e1d4b0, CDB 0xb5e1d4e0, AtaReq 0xb6782120, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xb5e1d4b0 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b5e1d4e0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data b6527618, count 8, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=b6527618) AtapiVirtToPhysAddr_: b6527618 -> 00000000:08bea618 set TERM ph data[0]=0:8bea618 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e1d4e0 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch1[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 1206017 CMD 0x1206017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e1d4b0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 40000001 ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 40000001 => ch1[10] AHCI: is=40000001 ss=00000113 serror=00000800 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 2051 TFD 0x2051 ERROR 0x20 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x20 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x1206017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x1 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1206017 WriteChannelPort4 1206016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 Err intr (0x40000000), SE (0x800) AtapiInterrupt: ATAPI Entered with status (0x51) AHCI branch (ATAPI) AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 120e017 WriteChannelPort4 120e016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 final CMD 0x1206016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206006 => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciCLO: lChan 1 send CLO ReadChannelPort4 ch1[18] = 1202006 WriteChannelPort4 120200e => ch1[18] ReadChannelPort4 ch1[18] = 1202006 final CMD 0x1202006 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 1202006 CMD 0x1202006 WriteChannelPort4 1202016 => ch1[18] ReadChannelPort4 ch1[18] = 1206016 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 1206016 CMD 0x1206016 WriteChannelPort4 1206017 => ch1[18] ReadChannelPort4 ch1[18] = 120e017 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 1 Base: 0xf778d180 MemIo 1 Proc 0 AHCI1_0x0 (0xf778d180) = 0x8e4a000 AHCI1_0x4 (0xf778d184) = 0x0 AHCI1_0x8 (0xf778d188) = 0x8e4a400 AHCI1_0xc (0xf778d18c) = 0x0 AHCI1_0x10 (0xf778d190) = 0x0 AHCI1_0x14 (0xf778d194) = 0xfd4000ff AHCI1_0x18 (0xf778d198) = 0x120e017 AHCI1_0x1c (0xf778d19c) = 0x0 AHCI1_0x20 (0xf778d1a0) = 0x2051 AHCI1_0x24 (0xf778d1a4) = 0xeb140101 AHCI1_0x28 (0xf778d1a8) = 0x113 AHCI1_0x2c (0xf778d1ac) = 0x300 AHCI1_0x30 (0xf778d1b0) = 0x0 AHCI1_0x34 (0xf778d1b4) = 0x0 AHCI1_0x38 (0xf778d1b8) = 0x0 AHCI1_0x3c (0xf778d1bc) = 0x0 AtapiInterrupt: Error 0x20 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x20 ATAPI: Device not ready AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e1d4b0, status 4 AtapiInterrupt: RequestComplete, srb 0xb5e1d4b0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x2 SRB 0xb5e2ad70, CDB 0xb5e2ada0, AtaReq 0xb6782120, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb5e2ad70 TopLevel (3), AtaReq 0xb6782120 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b5e2ada0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x47, data f7051870, count 12, lCh 1, dev 0 get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f7051870) AtapiVirtToPhysAddr_: f7051870 -> 00000000:08499870 set TERM ph data[0]=0:8499870 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b6782200, ch 1, dev 0 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: LimitedTransferMode == TransferMode = 47 (3), Device 0, last dev 0 AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b5e2ada0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 ReadChannelPort4 ch1[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 1, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0xa5, base 8e45200 ReadChannelPort4 ch1[18] = 120e017 CMD 0x120e017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 Set CI WriteChannelPort4 1 => ch1[38] No CMD START, already active AtapiStartIo: next Srb b5e2ad70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb5e2ad70, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e2ad70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01f8f000 ph data[0]=0:1f8f000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:00278000 ph data[1]=0:278000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:02029000 ph data[2]=0:2029000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0215a000 ph data[3]=0:215a000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:02053000 ph data[4]=0:2053000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:02174000 ph data[5]=0:2174000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0215d000 ph data[6]=0:215d000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0211e000 ph data[7]=0:211e000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01f87000 ph data[8]=0:1f87000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:00280000 ph data[9]=0:280000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01fa1000 ph data[10]=0:1fa1000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:02152000 ph data[11]=0:2152000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0204b000 ph data[12]=0:204b000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0216c000 ph data[13]=0:216c000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:02155000 ph data[14]=0:2155000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:02196000 set TERM ph data[15]=0:2196000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01f7f000 ph data[0]=0:1f7f000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00288000 ph data[1]=0:288000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01f99000 ph data[2]=0:1f99000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0214a000 ph data[3]=0:214a000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:02043000 ph data[4]=0:2043000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:020ac000 ph data[5]=0:20ac000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:020a5000 ph data[6]=0:20a5000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0218e000 ph data[7]=0:218e000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01f77000 ph data[8]=0:1f77000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:00290000 ph data[9]=0:290000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01f91000 ph data[10]=0:1f91000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:021ca000 ph data[11]=0:21ca000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0203b000 ph data[12]=0:203b000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0211c000 ph data[13]=0:211c000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:02185000 ph data[14]=0:2185000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02186000 set TERM ph data[14]=0:2185000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01f6f000 ph data[0]=0:1f6f000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:00298000 ph data[1]=0:298000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01f89000 ph data[2]=0:1f89000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:02092000 ph data[3]=0:2092000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01f73000 ph data[4]=0:1f73000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02114000 ph data[5]=0:2114000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0217d000 ph data[6]=0:217d000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0213e000 ph data[7]=0:213e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01f67000 ph data[8]=0:1f67000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:020b0000 ph data[9]=0:20b0000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01f41000 ph data[10]=0:1f41000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0208a000 ph data[11]=0:208a000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01fab000 ph data[12]=0:1fab000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01f74000 ph data[13]=0:1f74000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:02175000 ph data[14]=0:2175000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02136000 set TERM ph data[15]=0:2136000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0205f000 ph data[0]=0:205f000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:00268000 ph data[1]=0:268000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01f39000 ph data[2]=0:1f39000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:02082000 ph data[3]=0:2082000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01fa3000 ph data[4]=0:1fa3000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:01f6c000 ph data[5]=0:1f6c000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0216d000 ph data[6]=0:216d000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:002a6000 ph data[7]=0:2a6000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:02057000 ph data[8]=0:2057000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:00270000 ph data[9]=0:270000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01fb1000 ph data[10]=0:1fb1000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:02162000 ph data[11]=0:2162000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01f9b000 ph data[12]=0:1f9b000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:01f64000 ph data[13]=0:1f64000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01f4d000 ph data[14]=0:1f4d000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:002ae000 set TERM ph data[15]=0:2ae000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9ad8 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xf, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf988c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9a1c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:02087000 ph data[0]=0:2087000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:01fd0000 ph data[1]=0:1fd0000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01f59000 ph data[2]=0:1f59000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:01f42000 ph data[3]=0:1f42000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01f8b000 ph data[4]=0:1f8b000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01f54000 ph data[5]=0:1f54000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:01f3d000 ph data[6]=0:1f3d000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:002be000 ph data[7]=0:2be000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0207f000 ph data[8]=0:207f000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:01fc8000 ph data[9]=0:1fc8000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01f51000 ph data[10]=0:1f51000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:01f3a000 ph data[11]=0:1f3a000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:02003000 ph data[12]=0:2003000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0204c000 ph data[13]=0:204c000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01fb5000 ph data[14]=0:1fb5000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:002c6000 set TERM ph data[15]=0:2c6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:02077000 ph data[0]=0:2077000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:01fc0000 ph data[1]=0:1fc0000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01f49000 ph data[2]=0:1f49000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:01f72000 ph data[3]=0:1f72000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01ffb000 ph data[4]=0:1ffb000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:02044000 ph data[5]=0:2044000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:02035000 ph data[6]=0:2035000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:002ce000 ph data[7]=0:2ce000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0206f000 ph data[8]=0:206f000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:01fb8000 ph data[9]=0:1fb8000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01e81000 ph data[10]=0:1e81000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01f6a000 ph data[11]=0:1f6a000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:02073000 ph data[12]=0:2073000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:01fbc000 ph data[13]=0:1fbc000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0202d000 ph data[14]=0:202d000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02086000 set TERM ph data[15]=0:2086000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:02067000 ph data[0]=0:2067000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02070000 ph data[1]=0:2070000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01e79000 ph data[2]=0:1e79000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:01f62000 ph data[3]=0:1f62000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01feb000 ph data[4]=0:1feb000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02104000 ph data[5]=0:2104000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02025000 ph data[6]=0:2025000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:01ffe000 ph data[7]=0:1ffe000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0209f000 ph data[8]=0:209f000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:02170000 ph data[9]=0:2170000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01ef1000 ph data[10]=0:1ef1000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0201a000 ph data[11]=0:201a000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01fe3000 ph data[12]=0:1fe3000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:020fc000 ph data[13]=0:20fc000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0201d000 ph data[14]=0:201d000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:020fe000 set TERM ph data[15]=0:20fe000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0a4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:02097000 ph data[0]=0:2097000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:020a0000 ph data[1]=0:20a0000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01ee9000 ph data[2]=0:1ee9000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:020d2000 ph data[3]=0:20d2000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01fdb000 ph data[4]=0:1fdb000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:020f4000 ph data[5]=0:20f4000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:020dd000 ph data[6]=0:20dd000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:020f6000 ph data[7]=0:20f6000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01fcf000 ph data[8]=0:1fcf000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:02160000 ph data[9]=0:2160000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01e21000 ph data[10]=0:1e21000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:020ca000 ph data[11]=0:20ca000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01fd3000 ph data[12]=0:1fd3000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:020ec000 ph data[13]=0:20ec000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:020d5000 ph data[14]=0:20d5000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:020ee000 set TERM ph data[15]=0:20ee000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf98fc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01fc7000 ph data[0]=0:1fc7000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:02158000 ph data[1]=0:2158000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01e19000 ph data[2]=0:1e19000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:020c2000 ph data[3]=0:20c2000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01fcb000 ph data[4]=0:1fcb000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:020e4000 ph data[5]=0:20e4000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:020cd000 ph data[6]=0:20cd000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:020e6000 ph data[7]=0:20e6000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01fbf000 ph data[8]=0:1fbf000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:02150000 ph data[9]=0:2150000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:01e11000 ph data[10]=0:1e11000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:020ba000 ph data[11]=0:20ba000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01ebb000 ph data[12]=0:1ebb000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:02164000 ph data[13]=0:2164000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01ffd000 ph data[14]=0:1ffd000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:020de000 set TERM ph data[15]=0:20de000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:01fb7000 ph data[0]=0:1fb7000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:02148000 ph data[1]=0:2148000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:01e09000 ph data[2]=0:1e09000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:021c2000 ph data[3]=0:21c2000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01f33000 ph data[4]=0:1f33000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:020a4000 ph data[5]=0:20a4000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01f6d000 ph data[6]=0:1f6d000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:020d6000 ph data[7]=0:20d6000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:01faf000 ph data[8]=0:1faf000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:02140000 ph data[9]=0:2140000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:02041000 ph data[10]=0:2041000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:021ba000 ph data[11]=0:21ba000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01f2b000 ph data[12]=0:1f2b000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0203c000 ph data[13]=0:203c000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01f65000 ph data[14]=0:1f65000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:00296000 set TERM ph data[15]=0:296000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf4d4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:01fa7000 ph data[0]=0:1fa7000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:01fb0000 ph data[1]=0:1fb0000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:02039000 ph data[2]=0:2039000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:021b2000 ph data[3]=0:21b2000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01f6b000 ph data[4]=0:1f6b000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:02074000 ph data[5]=0:2074000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01f5d000 ph data[6]=0:1f5d000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0029e000 ph data[7]=0:29e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0201f000 ph data[8]=0:201f000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:020a8000 ph data[9]=0:20a8000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01f71000 ph data[10]=0:1f71000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01f5a000 ph data[11]=0:1f5a000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01f63000 ph data[12]=0:1f63000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0206c000 ph data[13]=0:206c000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01f55000 ph data[14]=0:1f55000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02036000 set TERM ph data[15]=0:2036000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:02017000 ph data[0]=0:2017000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01fe0000 ph data[1]=0:1fe0000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01f69000 ph data[2]=0:1f69000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:02052000 ph data[3]=0:2052000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01f5b000 ph data[4]=0:1f5b000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:02064000 ph data[5]=0:2064000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:02055000 ph data[6]=0:2055000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0202e000 ph data[7]=0:202e000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0204f000 ph data[8]=0:204f000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:020d8000 ph data[9]=0:20d8000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:02021000 ph data[10]=0:2021000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0204a000 ph data[11]=0:204a000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01f53000 ph data[12]=0:1f53000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0205c000 ph data[13]=0:205c000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0204d000 set TERM ph data[14]=0:204d000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcb4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xf, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:02047000 ph data[0]=0:2047000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:020d0000 ph data[1]=0:20d0000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:02019000 ph data[2]=0:2019000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:02042000 ph data[3]=0:2042000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01f4b000 ph data[4]=0:1f4b000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:02054000 ph data[5]=0:2054000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:02045000 ph data[6]=0:2045000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0201e000 ph data[7]=0:201e000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0203f000 ph data[8]=0:203f000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:020c8000 ph data[9]=0:20c8000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:02011000 ph data[10]=0:2011000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0203a000 ph data[11]=0:203a000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:020cb000 ph data[12]=0:20cb000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:01ec4000 ph data[13]=0:1ec4000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01f75000 ph data[14]=0:1f75000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:02016000 set TERM ph data[15]=0:2016000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:02037000 ph data[0]=0:2037000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:020c0000 ph data[1]=0:20c0000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:02009000 ph data[2]=0:2009000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:01eba000 ph data[3]=0:1eba000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:020c3000 ph data[4]=0:20c3000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:01edc000 ph data[5]=0:1edc000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:01ebd000 ph data[6]=0:1ebd000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0200e000 ph data[7]=0:200e000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0202f000 ph data[8]=0:202f000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:020b8000 ph data[9]=0:20b8000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:01cf1000 ph data[10]=0:1cf1000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:01f8a000 ph data[11]=0:1f8a000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:01ff3000 ph data[12]=0:1ff3000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:020dc000 ph data[13]=0:20dc000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:01fad000 ph data[14]=0:1fad000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02066000 set TERM ph data[15]=0:2066000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:02027000 ph data[0]=0:2027000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02178000 ph data[1]=0:2178000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:01f09000 ph data[2]=0:1f09000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:01ff2000 ph data[3]=0:1ff2000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:01cbb000 ph data[4]=0:1cbb000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:020d4000 ph data[5]=0:20d4000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:01f35000 ph data[6]=0:1f35000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0205e000 ph data[7]=0:205e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:01eb7000 ph data[8]=0:1eb7000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01f40000 ph data[9]=0:1f40000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:01eb9000 ph data[10]=0:1eb9000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:01fea000 ph data[11]=0:1fea000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:01cd3000 ph data[12]=0:1cd3000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:01ecc000 ph data[13]=0:1ecc000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:01fa5000 ph data[14]=0:1fa5000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02006000 set TERM ph data[15]=0:2006000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:01e9f000 ph data[0]=0:1e9f000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01fa8000 ph data[1]=0:1fa8000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:01f31000 ph data[2]=0:1f31000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:01f32000 ph data[2]=0:1f31000 (1fff) get Phys(data[n=3+2000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:01f23000 ph data[3]=0:1f23000 (fff) get Phys(data[n=4+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:01f3c000 ph data[4]=0:1f3c000 (fff) get Phys(data[n=5+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:01ead000 ph data[5]=0:1ead000 (fff) get Phys(data[n=6+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:02056000 ph data[6]=0:2056000 (fff) get Phys(data[n=7+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:01eaf000 ph data[7]=0:1eaf000 (fff) get Phys(data[n=8+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:01fe8000 ph data[8]=0:1fe8000 (fff) get Phys(data[n=9+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:01dc1000 ph data[9]=0:1dc1000 (fff) get Phys(data[n=10+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01f2a000 ph data[10]=0:1f2a000 (fff) get Phys(data[n=11+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:01f1b000 ph data[11]=0:1f1b000 (fff) get Phys(data[n=12+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0ba6c000 ph data[12]=0:ba6c000 (fff) get Phys(data[n=13+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:01f9d000 ph data[13]=0:1f9d000 (fff) get Phys(data[n=14+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:021ce000 set TERM ph data[14]=0:21ce000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcef90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcef90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01e97000 ph data[0]=0:1e97000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:02020000 ph data[1]=0:2020000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:01d69000 ph data[2]=0:1d69000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0238a000 ph data[3]=0:238a000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:01cc3000 ph data[4]=0:1cc3000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:01ed4000 ph data[5]=0:1ed4000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:afc65000 ph data[6]=0:afc65000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0b896000 ph data[7]=0:b896000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:01ea7000 ph data[8]=0:1ea7000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:01ff0000 ph data[9]=0:1ff0000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:00239000 ph data[10]=0:239000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:02392000 ph data[11]=0:2392000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:01e8b000 ph data[12]=0:1e8b000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:023e4000 ph data[13]=0:23e4000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:01e9d000 ph data[14]=0:1e9d000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0204e000 set TERM ph data[15]=0:204e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcef90, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf010, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf010, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0b947000 ph data[0]=0:b947000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0ba40000 ph data[1]=0:ba40000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00231000 ph data[2]=0:231000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0239a000 ph data[3]=0:239a000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:01ccb000 ph data[4]=0:1ccb000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:023ec000 ph data[5]=0:23ec000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:023ad000 ph data[6]=0:23ad000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:02a3e000 ph data[7]=0:2a3e000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:afc97000 ph data[8]=0:afc97000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0c080000 ph data[9]=0:c080000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:00229000 ph data[10]=0:229000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:023a2000 ph data[11]=0:23a2000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0234b000 ph data[12]=0:234b000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:023f4000 ph data[13]=0:23f4000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:023c5000 ph data[14]=0:23c5000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02a96000 set TERM ph data[15]=0:2a96000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf090, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf090, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:023b7000 ph data[0]=0:23b7000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02428000 ph data[1]=0:2428000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:00221000 ph data[2]=0:221000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:023ba000 ph data[3]=0:23ba000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0023b000 ph data[4]=0:23b000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:023fc000 ph data[5]=0:23fc000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:023cd000 ph data[6]=0:23cd000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:02a9e000 ph data[7]=0:2a9e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:002ef000 ph data[8]=0:2ef000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:02430000 ph data[9]=0:2430000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:00219000 ph data[10]=0:219000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0243a000 ph data[11]=0:243a000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:00233000 ph data[12]=0:233000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:02444000 ph data[13]=0:2444000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:023dd000 ph data[14]=0:23dd000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02aa6000 set TERM ph data[15]=0:2aa6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf010, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf1e0 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf110, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf110, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:002e7000 ph data[0]=0:2e7000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:02998000 ph data[1]=0:2998000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:00211000 ph data[2]=0:211000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:02442000 ph data[3]=0:2442000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0022b000 ph data[4]=0:22b000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0244c000 ph data[5]=0:244c000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:023e5000 ph data[6]=0:23e5000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:02aae000 ph data[7]=0:2aae000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:002df000 ph data[8]=0:2df000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:029a0000 ph data[9]=0:29a0000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:00289000 ph data[10]=0:289000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0244a000 ph data[11]=0:244a000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:00223000 ph data[12]=0:223000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0297c000 ph data[13]=0:297c000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:023ed000 ph data[14]=0:23ed000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:02ab6000 set TERM ph data[15]=0:2ab6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf0b4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf090, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6bf9934 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf110, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf190, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf190, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:002d7000 ph data[0]=0:2d7000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:02a00000 ph data[1]=0:2a00000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:00281000 ph data[2]=0:281000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0294a000 ph data[3]=0:294a000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0021b000 ph data[4]=0:21b000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0298c000 ph data[5]=0:298c000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:023f5000 ph data[6]=0:23f5000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:02abe000 ph data[7]=0:2abe000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0233f000 ph data[8]=0:233f000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:02a10000 ph data[9]=0:2a10000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:00279000 ph data[10]=0:279000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:02952000 ph data[11]=0:2952000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:00213000 ph data[12]=0:213000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:02994000 ph data[13]=0:2994000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:023fd000 ph data[14]=0:23fd000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:02ac6000 set TERM ph data[15]=0:2ac6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf190, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf210, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf210, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:02347000 ph data[0]=0:2347000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:02a18000 ph data[1]=0:2a18000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:00271000 ph data[2]=0:271000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0295a000 ph data[3]=0:295a000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0020b000 ph data[4]=0:20b000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0299c000 ph data[5]=0:299c000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:02445000 ph data[6]=0:2445000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:02ace000 ph data[7]=0:2ace000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0234f000 ph data[8]=0:234f000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:02a20000 ph data[9]=0:2a20000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:00269000 ph data[10]=0:269000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:02962000 ph data[11]=0:2962000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:00203000 ph data[12]=0:203000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:029a4000 ph data[13]=0:29a4000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0244d000 ph data[14]=0:244d000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02a46000 set TERM ph data[15]=0:2a46000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf4d4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf210, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fcf290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:02377000 ph data[0]=0:2377000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:02a28000 ph data[1]=0:2a28000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:00261000 ph data[2]=0:261000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0296a000 ph data[3]=0:296a000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0236b000 ph data[4]=0:236b000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:029ac000 ph data[5]=0:29ac000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02455000 ph data[6]=0:2455000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:02a4e000 ph data[7]=0:2a4e000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:023c7000 ph data[8]=0:23c7000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:02a30000 ph data[9]=0:2a30000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:00259000 ph data[10]=0:259000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:023c2000 ph data[11]=0:23c2000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:02373000 ph data[12]=0:2373000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:029b4000 ph data[13]=0:29b4000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:029ad000 ph data[14]=0:29ad000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:02a56000 set TERM ph data[15]=0:2a56000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf290, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6fbf600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fcf310, OrigWordsRequested 0x7500, DevSize 0x75 IdeReadWrite (REQ): Starting sector is 38fcf310, Number of WORDS 0x7500, DevSize 0x75 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count ea00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:023cf000 ph data[0]=0:23cf000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:02a88000 ph data[1]=0:2a88000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:00251000 ph data[2]=0:251000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:023ca000 ph data[3]=0:23ca000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0237b000 ph data[4]=0:237b000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:029bc000 ph data[5]=0:29bc000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:029b5000 ph data[6]=0:29b5000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:02a5e000 ph data[7]=0:2a5e000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:023df000 ph data[8]=0:23df000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:02a90000 ph data[9]=0:2a90000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:00209000 ph data[10]=0:209000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:023d2000 ph data[11]=0:23d2000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0238b000 ph data[12]=0:238b000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:02454000 ph data[13]=0:2454000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:029bd000 set TERM ph data[14]=0:29bd000 (9ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fcf310, Count 0x75(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xf, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 7500, WordsLeft 7500 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ea00, full size ea00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 fixme:(dll/win32/comctl32/toolbar.c:5624) [000300DE] response 1 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960f660, OrigWordsRequested 0x1700, DevSize 0x17 IdeReadWrite (REQ): Starting sector is 3960f660, Number of WORDS 0x1700, DevSize 0x17 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6f9c000, count 2e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6f9c000) AtapiVirtToPhysAddr_: f6f9c000 -> 00000000:023ea000 ph data[0]=0:23ea000 (fff) get Phys(data[n=1+1000]=f6f9d000) AtapiVirtToPhysAddr_: f6f9d000 -> 00000000:023c3000 ph data[1]=0:23c3000 (fff) get Phys(data[n=2+1000]=f6f9e000) AtapiVirtToPhysAddr_: f6f9e000 -> 00000000:0295c000 set TERM ph data[2]=0:295c000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f660, Count 0x17(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x3, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1700, WordsLeft 1700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2e00, full size 2e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:12163000 ph data[0]=0:12163000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:12164000 ph data[0]=0:12163000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:12165000 ph data[0]=0:12163000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:1215e000 ph data[1]=0:1215e000 (fff) get Phys(data[n=2+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:12167000 ph data[2]=0:12167000 (fff) get Phys(data[n=3+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:12168000 ph data[2]=0:12167000 (1fff) get Phys(data[n=3+2000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:12161000 ph data[3]=0:12161000 (fff) get Phys(data[n=4+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:12162000 ph data[3]=0:12161000 (1fff) get Phys(data[n=4+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:1216b000 ph data[4]=0:1216b000 (fff) get Phys(data[n=5+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:1216c000 ph data[4]=0:1216b000 (1fff) get Phys(data[n=5+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:1216d000 ph data[4]=0:1216b000 (2fff) get Phys(data[n=5+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:12166000 ph data[5]=0:12166000 (fff) get Phys(data[n=6+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:1216f000 ph data[6]=0:1216f000 (fff) get Phys(data[n=7+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:12170000 ph data[6]=0:1216f000 (1fff) get Phys(data[n=7+2000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:12169000 ph data[7]=0:12169000 (fff) get Phys(data[n=8+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:1216a000 set TERM ph data[7]=0:12169000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b260, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x8, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b2e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b2e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:12173000 ph data[0]=0:12173000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:12174000 ph data[0]=0:12173000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:12175000 ph data[0]=0:12173000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:1216e000 ph data[1]=0:1216e000 (fff) get Phys(data[n=2+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:12177000 ph data[2]=0:12177000 (fff) get Phys(data[n=3+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:12178000 ph data[2]=0:12177000 (1fff) get Phys(data[n=3+2000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:12171000 ph data[3]=0:12171000 (fff) get Phys(data[n=4+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:12172000 ph data[3]=0:12171000 (1fff) get Phys(data[n=4+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:1217b000 ph data[4]=0:1217b000 (fff) get Phys(data[n=5+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:1217c000 ph data[4]=0:1217b000 (1fff) get Phys(data[n=5+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:1217d000 ph data[4]=0:1217b000 (2fff) get Phys(data[n=5+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:12176000 ph data[5]=0:12176000 (fff) get Phys(data[n=6+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:1217f000 ph data[6]=0:1217f000 (fff) get Phys(data[n=7+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:12180000 ph data[6]=0:1217f000 (1fff) get Phys(data[n=7+2000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:12179000 ph data[7]=0:12179000 (fff) get Phys(data[n=8+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:1217a000 set TERM ph data[7]=0:12179000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b2e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x8, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b360, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b360, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:12183000 ph data[0]=0:12183000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:12184000 ph data[0]=0:12183000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:12185000 ph data[0]=0:12183000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:1217e000 ph data[1]=0:1217e000 (fff) get Phys(data[n=2+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:12187000 ph data[2]=0:12187000 (fff) get Phys(data[n=3+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:12188000 ph data[2]=0:12187000 (1fff) get Phys(data[n=3+2000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:12181000 ph data[3]=0:12181000 (fff) get Phys(data[n=4+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:12182000 ph data[3]=0:12181000 (1fff) get Phys(data[n=4+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:1218b000 ph data[4]=0:1218b000 (fff) get Phys(data[n=5+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:1218c000 ph data[4]=0:1218b000 (1fff) get Phys(data[n=5+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:1218d000 ph data[4]=0:1218b000 (2fff) get Phys(data[n=5+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:12186000 ph data[5]=0:12186000 (fff) get Phys(data[n=6+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:1218f000 ph data[6]=0:1218f000 (fff) get Phys(data[n=7+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:12190000 ph data[6]=0:1218f000 (1fff) get Phys(data[n=7+2000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:12189000 ph data[7]=0:12189000 (fff) get Phys(data[n=8+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:1218a000 set TERM ph data[7]=0:12189000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b360, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x8, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b3e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b3e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:12193000 ph data[0]=0:12193000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:12194000 ph data[0]=0:12193000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:12195000 ph data[0]=0:12193000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:1218e000 ph data[1]=0:1218e000 (fff) get Phys(data[n=2+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:12197000 ph data[2]=0:12197000 (fff) get Phys(data[n=3+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:12198000 ph data[2]=0:12197000 (1fff) get Phys(data[n=3+2000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:12191000 ph data[3]=0:12191000 (fff) get Phys(data[n=4+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:12192000 ph data[3]=0:12191000 (1fff) get Phys(data[n=4+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:1219b000 ph data[4]=0:1219b000 (fff) get Phys(data[n=5+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:1219c000 ph data[4]=0:1219b000 (1fff) get Phys(data[n=5+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:1219d000 ph data[4]=0:1219b000 (2fff) get Phys(data[n=5+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:12196000 ph data[5]=0:12196000 (fff) get Phys(data[n=6+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:1219f000 ph data[6]=0:1219f000 (fff) get Phys(data[n=7+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:121a0000 ph data[6]=0:1219f000 (1fff) get Phys(data[n=7+2000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:12199000 ph data[7]=0:12199000 (fff) get Phys(data[n=8+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:1219a000 set TERM ph data[7]=0:12199000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b3e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x8, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:0c7b3000 ph data[0]=0:c7b3000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:0c7b4000 ph data[0]=0:c7b3000 (1fff) get Phys(data[n=1+2000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0c7b5000 ph data[0]=0:c7b3000 (2fff) get Phys(data[n=1+3000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0c7b6000 ph data[0]=0:c7b3000 (3fff) get Phys(data[n=1+4000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0c7b7000 ph data[0]=0:c7b3000 (4fff) get Phys(data[n=1+5000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0c7b8000 ph data[0]=0:c7b3000 (5fff) get Phys(data[n=1+6000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:0c7b9000 ph data[0]=0:c7b3000 (6fff) get Phys(data[n=1+7000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0c7b2000 ph data[1]=0:c7b2000 (fff) get Phys(data[n=2+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:0c7bb000 ph data[2]=0:c7bb000 (fff) get Phys(data[n=3+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0c7bc000 ph data[2]=0:c7bb000 (1fff) get Phys(data[n=3+2000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0c7bd000 ph data[2]=0:c7bb000 (2fff) get Phys(data[n=3+3000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0c7be000 ph data[2]=0:c7bb000 (3fff) get Phys(data[n=3+4000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0c7bf000 ph data[2]=0:c7bb000 (4fff) get Phys(data[n=3+5000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0c7c0000 ph data[2]=0:c7bb000 (5fff) get Phys(data[n=3+6000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:0c7c1000 ph data[2]=0:c7bb000 (6fff) get Phys(data[n=3+7000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0c7ba000 set TERM ph data[3]=0:c7ba000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b460, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b4e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b4e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:0c7c3000 ph data[0]=0:c7c3000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:0c7c4000 ph data[0]=0:c7c3000 (1fff) get Phys(data[n=1+2000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0c7c5000 ph data[0]=0:c7c3000 (2fff) get Phys(data[n=1+3000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0c7c6000 ph data[0]=0:c7c3000 (3fff) get Phys(data[n=1+4000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0c7c7000 ph data[0]=0:c7c3000 (4fff) get Phys(data[n=1+5000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0c7c8000 ph data[0]=0:c7c3000 (5fff) get Phys(data[n=1+6000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0c7c9000 ph data[0]=0:c7c3000 (6fff) get Phys(data[n=1+7000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0c7c2000 ph data[1]=0:c7c2000 (fff) get Phys(data[n=2+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0c7cb000 ph data[2]=0:c7cb000 (fff) get Phys(data[n=3+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0c7cc000 ph data[2]=0:c7cb000 (1fff) get Phys(data[n=3+2000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0c7cd000 ph data[2]=0:c7cb000 (2fff) get Phys(data[n=3+3000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0c7ce000 ph data[2]=0:c7cb000 (3fff) get Phys(data[n=3+4000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0c7cf000 ph data[2]=0:c7cb000 (4fff) get Phys(data[n=3+5000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0c7d0000 ph data[2]=0:c7cb000 (5fff) get Phys(data[n=3+6000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0c7d1000 ph data[2]=0:c7cb000 (6fff) get Phys(data[n=3+7000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:0c7ca000 set TERM ph data[3]=0:c7ca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b4e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0c7d3000 ph data[0]=0:c7d3000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0c7d4000 ph data[0]=0:c7d3000 (1fff) get Phys(data[n=1+2000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0c7d5000 ph data[0]=0:c7d3000 (2fff) get Phys(data[n=1+3000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0c7d6000 ph data[0]=0:c7d3000 (3fff) get Phys(data[n=1+4000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0c7d7000 ph data[0]=0:c7d3000 (4fff) get Phys(data[n=1+5000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0c7d8000 ph data[0]=0:c7d3000 (5fff) get Phys(data[n=1+6000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:0c7d9000 ph data[0]=0:c7d3000 (6fff) get Phys(data[n=1+7000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0c7d2000 ph data[1]=0:c7d2000 (fff) get Phys(data[n=2+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0c7db000 ph data[2]=0:c7db000 (fff) get Phys(data[n=3+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:0c7dc000 ph data[2]=0:c7db000 (1fff) get Phys(data[n=3+2000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0c7dd000 ph data[2]=0:c7db000 (2fff) get Phys(data[n=3+3000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0c7de000 ph data[2]=0:c7db000 (3fff) get Phys(data[n=3+4000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0c7df000 ph data[2]=0:c7db000 (4fff) get Phys(data[n=3+5000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0c7e0000 ph data[2]=0:c7db000 (5fff) get Phys(data[n=3+6000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0c7e1000 ph data[2]=0:c7db000 (6fff) get Phys(data[n=3+7000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0c7da000 set TERM ph data[3]=0:c7da000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b560, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b5e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b5e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0c7e3000 ph data[0]=0:c7e3000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0c7e4000 ph data[0]=0:c7e3000 (1fff) get Phys(data[n=1+2000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0c7e5000 ph data[0]=0:c7e3000 (2fff) get Phys(data[n=1+3000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0c7e6000 ph data[0]=0:c7e3000 (3fff) get Phys(data[n=1+4000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0c7e7000 ph data[0]=0:c7e3000 (4fff) get Phys(data[n=1+5000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0c7e8000 ph data[0]=0:c7e3000 (5fff) get Phys(data[n=1+6000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0c7e9000 ph data[0]=0:c7e3000 (6fff) get Phys(data[n=1+7000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0c7e2000 ph data[1]=0:c7e2000 (fff) get Phys(data[n=2+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0c7eb000 ph data[2]=0:c7eb000 (fff) get Phys(data[n=3+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:0c7ec000 ph data[2]=0:c7eb000 (1fff) get Phys(data[n=3+2000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:0c7ed000 ph data[2]=0:c7eb000 (2fff) get Phys(data[n=3+3000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0c7ee000 ph data[2]=0:c7eb000 (3fff) get Phys(data[n=3+4000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0c7ef000 ph data[2]=0:c7eb000 (4fff) get Phys(data[n=3+5000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0c7f0000 ph data[2]=0:c7eb000 (5fff) get Phys(data[n=3+6000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:0c7f1000 ph data[2]=0:c7eb000 (6fff) get Phys(data[n=3+7000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0c7ea000 set TERM ph data[3]=0:c7ea000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b5e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x4, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:afcc6000 ph data[0]=0:afcc6000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:afcf7000 ph data[1]=0:afcf7000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:afd50000 ph data[2]=0:afd50000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0bd59000 ph data[3]=0:bd59000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:afcc2000 ph data[4]=0:afcc2000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:afcf3000 ph data[5]=0:afcf3000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:afd64000 ph data[6]=0:afd64000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0bd4d000 ph data[7]=0:bd4d000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:afcbe000 ph data[8]=0:afcbe000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:afcef000 ph data[9]=0:afcef000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:afd48000 ph data[10]=0:afd48000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0bd51000 ph data[11]=0:bd51000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:afcba000 ph data[12]=0:afcba000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:afceb000 ph data[13]=0:afceb000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:afd5c000 ph data[14]=0:afd5c000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:afcf5000 set TERM ph data[15]=0:afcf5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:afd56000 ph data[0]=0:afd56000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:afce7000 ph data[1]=0:afce7000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:afd40000 ph data[2]=0:afd40000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:afcf1000 ph data[3]=0:afcf1000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:afd5a000 ph data[4]=0:afd5a000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:afce3000 ph data[5]=0:afce3000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:afd54000 ph data[6]=0:afd54000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:afced000 ph data[7]=0:afced000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:afd4e000 ph data[8]=0:afd4e000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:afcdf000 ph data[9]=0:afcdf000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:afd38000 ph data[10]=0:afd38000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:afce9000 ph data[11]=0:afce9000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:afd52000 ph data[12]=0:afd52000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:afcdb000 ph data[13]=0:afcdb000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:afd4c000 ph data[14]=0:afd4c000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:afce5000 set TERM ph data[15]=0:afce5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b6e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:afd46000 ph data[0]=0:afd46000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:afcd7000 ph data[1]=0:afcd7000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:afd30000 ph data[2]=0:afd30000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:afce1000 ph data[3]=0:afce1000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:afd4a000 ph data[4]=0:afd4a000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:afcd3000 ph data[5]=0:afcd3000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:afd44000 ph data[6]=0:afd44000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:afcdd000 ph data[7]=0:afcdd000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:afd3e000 ph data[8]=0:afd3e000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afccf000 ph data[9]=0:afccf000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:afd28000 ph data[10]=0:afd28000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:afcd9000 ph data[11]=0:afcd9000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:afd42000 ph data[12]=0:afd42000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:afccb000 ph data[13]=0:afccb000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:afd3c000 ph data[14]=0:afd3c000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:afcd5000 set TERM ph data[15]=0:afcd5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b7e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b7e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:afd36000 ph data[0]=0:afd36000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:afcc7000 ph data[1]=0:afcc7000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:afd20000 ph data[2]=0:afd20000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:afcd1000 ph data[3]=0:afcd1000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:afd3a000 ph data[4]=0:afd3a000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:afcc3000 ph data[5]=0:afcc3000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:afd34000 ph data[6]=0:afd34000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:afccd000 ph data[7]=0:afccd000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:afd2e000 ph data[8]=0:afd2e000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afcbf000 ph data[9]=0:afcbf000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:afd18000 ph data[10]=0:afd18000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:afcc9000 ph data[11]=0:afcc9000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:afd32000 ph data[12]=0:afd32000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:afcbb000 ph data[13]=0:afcbb000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:afd2c000 ph data[14]=0:afd2c000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:afcc5000 set TERM ph data[15]=0:afcc5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55e4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b7e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:108fb000 ph data[0]=0:108fb000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:1097c000 ph data[1]=0:1097c000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:1090d000 ph data[2]=0:1090d000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:109a6000 ph data[3]=0:109a6000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:108ff000 ph data[4]=0:108ff000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:108f8000 ph data[5]=0:108f8000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:10919000 ph data[6]=0:10919000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:1091a000 ph data[6]=0:10919000 (1fff) get Phys(data[n=7+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:109b3000 ph data[7]=0:109b3000 (fff) get Phys(data[n=8+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:11a54000 ph data[8]=0:11a54000 (fff) get Phys(data[n=9+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:10905000 ph data[9]=0:10905000 (fff) get Phys(data[n=10+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:1099e000 ph data[10]=0:1099e000 (fff) get Phys(data[n=11+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:109b7000 ph data[11]=0:109b7000 (fff) get Phys(data[n=12+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:109b0000 ph data[12]=0:109b0000 (fff) get Phys(data[n=13+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:10911000 ph data[13]=0:10911000 (fff) get Phys(data[n=14+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:10912000 set TERM ph data[13]=0:10911000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xe, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:109ab000 ph data[0]=0:109ab000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:11a4c000 ph data[1]=0:11a4c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:108fd000 ph data[2]=0:108fd000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:10996000 ph data[3]=0:10996000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:109af000 ph data[4]=0:109af000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:109a8000 ph data[5]=0:109a8000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:10909000 ph data[6]=0:10909000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:1090a000 ph data[6]=0:10909000 (1fff) get Phys(data[n=7+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:109a3000 ph data[7]=0:109a3000 (fff) get Phys(data[n=8+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:11a44000 ph data[8]=0:11a44000 (fff) get Phys(data[n=9+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:109b5000 ph data[9]=0:109b5000 (fff) get Phys(data[n=10+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:1098e000 ph data[10]=0:1098e000 (fff) get Phys(data[n=11+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:109a7000 ph data[11]=0:109a7000 (fff) get Phys(data[n=12+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:109a0000 ph data[12]=0:109a0000 (fff) get Phys(data[n=13+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:10901000 ph data[13]=0:10901000 (fff) get Phys(data[n=14+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:10902000 set TERM ph data[13]=0:10901000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b55a4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b8e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xe, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:1099b000 ph data[0]=0:1099b000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:11a3c000 ph data[1]=0:11a3c000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:109ad000 ph data[2]=0:109ad000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:10986000 ph data[3]=0:10986000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:1099f000 ph data[4]=0:1099f000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:10998000 ph data[5]=0:10998000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:108f9000 ph data[6]=0:108f9000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:108fa000 ph data[6]=0:108f9000 (1fff) get Phys(data[n=7+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:10993000 ph data[7]=0:10993000 (fff) get Phys(data[n=8+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:11a34000 ph data[8]=0:11a34000 (fff) get Phys(data[n=9+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:109a5000 ph data[9]=0:109a5000 (fff) get Phys(data[n=10+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:1097e000 ph data[10]=0:1097e000 (fff) get Phys(data[n=11+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:10997000 ph data[11]=0:10997000 (fff) get Phys(data[n=12+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:10990000 ph data[12]=0:10990000 (fff) get Phys(data[n=13+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:109b1000 ph data[13]=0:109b1000 (fff) get Phys(data[n=14+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:109b2000 set TERM ph data[13]=0:109b1000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960b9e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960b9e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:1098b000 ph data[0]=0:1098b000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:11a2c000 ph data[1]=0:11a2c000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:1099d000 ph data[2]=0:1099d000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:11a56000 ph data[3]=0:11a56000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:1098f000 ph data[4]=0:1098f000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:10988000 ph data[5]=0:10988000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:109a9000 ph data[6]=0:109a9000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:109aa000 ph data[6]=0:109a9000 (1fff) get Phys(data[n=7+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:10983000 ph data[7]=0:10983000 (fff) get Phys(data[n=8+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:11a24000 ph data[8]=0:11a24000 (fff) get Phys(data[n=9+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:10995000 ph data[9]=0:10995000 (fff) get Phys(data[n=10+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:11a4e000 ph data[10]=0:11a4e000 (fff) get Phys(data[n=11+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:10987000 ph data[11]=0:10987000 (fff) get Phys(data[n=12+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:10980000 ph data[12]=0:10980000 (fff) get Phys(data[n=13+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:109a1000 ph data[13]=0:109a1000 (fff) get Phys(data[n=14+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:109a2000 set TERM ph data[13]=0:109a1000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xe, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960b9e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xe, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ba60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ba60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:1097b000 ph data[0]=0:1097b000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:11a1c000 ph data[1]=0:11a1c000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:1098d000 ph data[2]=0:1098d000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:11a46000 ph data[3]=0:11a46000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:1097f000 ph data[4]=0:1097f000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:10978000 ph data[5]=0:10978000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:10999000 ph data[6]=0:10999000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:1099a000 ph data[6]=0:10999000 (1fff) get Phys(data[n=7+2000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:11a5b000 ph data[7]=0:11a5b000 (fff) get Phys(data[n=8+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:11b44000 ph data[8]=0:11b44000 (fff) get Phys(data[n=9+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:10985000 ph data[9]=0:10985000 (fff) get Phys(data[n=10+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:11a3e000 ph data[10]=0:11a3e000 (fff) get Phys(data[n=11+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:11a57000 ph data[11]=0:11a57000 (fff) get Phys(data[n=12+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:11a58000 ph data[11]=0:11a57000 (1fff) get Phys(data[n=12+2000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:10991000 ph data[12]=0:10991000 (fff) get Phys(data[n=13+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:10992000 set TERM ph data[12]=0:10991000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ba60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xd, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:11a53000 ph data[0]=0:11a53000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:11b3c000 ph data[1]=0:11b3c000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:1097d000 ph data[2]=0:1097d000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:11a36000 ph data[3]=0:11a36000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:11a4f000 ph data[4]=0:11a4f000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:11a50000 ph data[4]=0:11a4f000 (1fff) get Phys(data[n=5+2000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:10989000 ph data[5]=0:10989000 (fff) get Phys(data[n=6+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:1098a000 ph data[5]=0:10989000 (1fff) get Phys(data[n=6+2000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:11a4b000 ph data[6]=0:11a4b000 (fff) get Phys(data[n=7+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:11b34000 ph data[7]=0:11b34000 (fff) get Phys(data[n=8+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:11a55000 ph data[8]=0:11a55000 (fff) get Phys(data[n=9+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:11a2e000 ph data[9]=0:11a2e000 (fff) get Phys(data[n=10+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:11a47000 ph data[10]=0:11a47000 (fff) get Phys(data[n=11+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:11a48000 ph data[10]=0:11a47000 (1fff) get Phys(data[n=11+2000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:10981000 ph data[11]=0:10981000 (fff) get Phys(data[n=12+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:10982000 set TERM ph data[11]=0:10981000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bb60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bb60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:11a43000 ph data[0]=0:11a43000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:11b2c000 ph data[1]=0:11b2c000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:11a4d000 ph data[2]=0:11a4d000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:11a26000 ph data[3]=0:11a26000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:11a3f000 ph data[4]=0:11a3f000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:11a40000 ph data[4]=0:11a3f000 (1fff) get Phys(data[n=5+2000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:10979000 ph data[5]=0:10979000 (fff) get Phys(data[n=6+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:1097a000 ph data[5]=0:10979000 (1fff) get Phys(data[n=6+2000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:11a3b000 ph data[6]=0:11a3b000 (fff) get Phys(data[n=7+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:11b24000 ph data[7]=0:11b24000 (fff) get Phys(data[n=8+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:11a45000 ph data[8]=0:11a45000 (fff) get Phys(data[n=9+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:11a1e000 ph data[9]=0:11a1e000 (fff) get Phys(data[n=10+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:11a37000 ph data[10]=0:11a37000 (fff) get Phys(data[n=11+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:11a38000 ph data[10]=0:11a37000 (1fff) get Phys(data[n=11+2000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:11a59000 ph data[11]=0:11a59000 (fff) get Phys(data[n=12+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:11a5a000 set TERM ph data[11]=0:11a59000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xc, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b5720 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bbe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bbe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:11a33000 ph data[0]=0:11a33000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:11b1c000 ph data[1]=0:11b1c000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:11a3d000 ph data[2]=0:11a3d000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:11b46000 ph data[3]=0:11b46000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:11a2f000 ph data[4]=0:11a2f000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:11a30000 ph data[4]=0:11a2f000 (1fff) get Phys(data[n=5+2000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:11a51000 ph data[5]=0:11a51000 (fff) get Phys(data[n=6+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:11a52000 ph data[5]=0:11a51000 (1fff) get Phys(data[n=6+2000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:11a2b000 ph data[6]=0:11a2b000 (fff) get Phys(data[n=7+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:11b14000 ph data[7]=0:11b14000 (fff) get Phys(data[n=8+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:11a35000 ph data[8]=0:11a35000 (fff) get Phys(data[n=9+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:11b3e000 ph data[9]=0:11b3e000 (fff) get Phys(data[n=10+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:11a27000 ph data[10]=0:11a27000 (fff) get Phys(data[n=11+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:11a28000 ph data[10]=0:11a27000 (1fff) get Phys(data[n=11+2000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:11a49000 ph data[11]=0:11a49000 (fff) get Phys(data[n=12+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:11a4a000 set TERM ph data[11]=0:11a49000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bb60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0xc, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bbe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xc, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (win32ss/user/ntuser/cursoricon.c:815) err: Trying to delete global cursor! (win32ss/user/ntuser/cursoricon.c:815) err: Trying to delete global cursor! (win32ss/user/ntuser/cursoricon.c:815) err: Trying to delete global cursor! (win32ss/user/ntuser/cursoricon.c:815) err: Trying to delete global cursor! shellbrowser.cpp:1099: Unexpected failure 80004005. (win32ss/user/ntuser/msgqueue.c:2388) err: MQ Cleanup Post Messages E1776E60 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b fixme:(dll/win32/comctl32/toolbar.c:394) [000800FA] TBSTYLE_REGISTERDROP not implemented TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1570, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1570, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:01f38000 ph data[0]=0:1f38000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:023d9000 ph data[1]=0:23d9000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0ba1a000 ph data[2]=0:ba1a000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0baa3000 ph data[3]=0:baa3000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:0c04c000 ph data[4]=0:c04c000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0b8c5000 ph data[5]=0:b8c5000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:02b7e000 ph data[6]=0:2b7e000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:02a4f000 ph data[7]=0:2a4f000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:02098000 ph data[8]=0:2098000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:0ba59000 ph data[9]=0:ba59000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:023da000 ph data[10]=0:23da000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0239b000 ph data[11]=0:239b000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0bf54000 ph data[12]=0:bf54000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:afc95000 ph data[13]=0:afc95000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:02a7e000 ph data[14]=0:2a7e000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0bb9f000 set TERM ph data[15]=0:bb9f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1570, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x5, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff15f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff15f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:02aa0000 ph data[0]=0:2aa0000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:00201000 ph data[1]=0:201000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:269ea000 ph data[2]=0:269ea000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bdcb000 ph data[3]=0:bdcb000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bf04000 ph data[4]=0:bf04000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b985000 ph data[5]=0:b985000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:38a86000 ph data[6]=0:38a86000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:023ef000 ph data[7]=0:23ef000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:0c120000 ph data[8]=0:c120000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:0bf69000 ph data[9]=0:bf69000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:0c07a000 ph data[10]=0:c07a000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:0bf8b000 ph data[11]=0:bf8b000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0053c000 ph data[12]=0:53c000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:afe2d000 ph data[13]=0:afe2d000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:0bc26000 ph data[14]=0:bc26000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:3f757000 set TERM ph data[15]=0:3f757000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1670, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1670, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:0c130000 ph data[0]=0:c130000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:0bff9000 ph data[1]=0:bff9000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:0bb2a000 ph data[2]=0:bb2a000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:0bf7b000 ph data[3]=0:bf7b000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:afe24000 ph data[4]=0:afe24000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:0b9dd000 ph data[5]=0:b9dd000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:38996000 ph data[6]=0:38996000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:38b37000 ph data[7]=0:38b37000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:0c138000 ph data[8]=0:c138000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:afde1000 ph data[9]=0:afde1000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:0bb22000 ph data[10]=0:bb22000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:0bb93000 ph data[11]=0:bb93000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:0bf2c000 ph data[12]=0:bf2c000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0be25000 ph data[13]=0:be25000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:0bec6000 ph data[14]=0:bec6000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:0bc37000 set TERM ph data[15]=0:bc37000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff16f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff16f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:0bc10000 ph data[0]=0:bc10000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:0bbe1000 ph data[1]=0:bbe1000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:0bbda000 ph data[2]=0:bbda000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:0be43000 ph data[3]=0:be43000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:0009c000 ph data[4]=0:9c000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:38a75000 ph data[5]=0:38a75000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:0b886000 ph data[6]=0:b886000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:0beb7000 ph data[7]=0:beb7000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0bdb0000 ph data[8]=0:bdb0000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:01cd9000 ph data[9]=0:1cd9000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:00532000 ph data[10]=0:532000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:0b94b000 ph data[11]=0:b94b000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:0bc24000 ph data[12]=0:bc24000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:0299d000 ph data[13]=0:299d000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:3f7d6000 ph data[14]=0:3f7d6000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:0baaf000 set TERM ph data[15]=0:baaf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x28 UniataNeedQueueing: qd=3 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff15f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x5, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=2 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1670, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff16f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1770, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1770, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6afa000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6afa000) AtapiVirtToPhysAddr_: f6afa000 -> 00000000:02a5c000 ph data[0]=0:2a5c000 (fff) get Phys(data[n=1+1000]=f6afb000) AtapiVirtToPhysAddr_: f6afb000 -> 00000000:029a5000 ph data[1]=0:29a5000 (fff) get Phys(data[n=2+1000]=f6afc000) AtapiVirtToPhysAddr_: f6afc000 -> 00000000:0bffe000 ph data[2]=0:bffe000 (fff) get Phys(data[n=3+1000]=f6afd000) AtapiVirtToPhysAddr_: f6afd000 -> 00000000:0baf7000 ph data[3]=0:baf7000 (fff) get Phys(data[n=4+1000]=f6afe000) AtapiVirtToPhysAddr_: f6afe000 -> 00000000:38ad0000 ph data[4]=0:38ad0000 (fff) get Phys(data[n=5+1000]=f6aff000) AtapiVirtToPhysAddr_: f6aff000 -> 00000000:0bc29000 ph data[5]=0:bc29000 (fff) get Phys(data[n=6+1000]=f6b00000) AtapiVirtToPhysAddr_: f6b00000 -> 00000000:afdea000 ph data[6]=0:afdea000 (fff) get Phys(data[n=7+1000]=f6b01000) AtapiVirtToPhysAddr_: f6b01000 -> 00000000:0b983000 ph data[7]=0:b983000 (fff) get Phys(data[n=8+1000]=f6b02000) AtapiVirtToPhysAddr_: f6b02000 -> 00000000:02a64000 ph data[8]=0:2a64000 (fff) get Phys(data[n=9+1000]=f6b03000) AtapiVirtToPhysAddr_: f6b03000 -> 00000000:02a45000 ph data[9]=0:2a45000 (fff) get Phys(data[n=10+1000]=f6b04000) AtapiVirtToPhysAddr_: f6b04000 -> 00000000:0b8ce000 ph data[10]=0:b8ce000 (fff) get Phys(data[n=11+1000]=f6b05000) AtapiVirtToPhysAddr_: f6b05000 -> 00000000:0ba2f000 ph data[11]=0:ba2f000 (fff) get Phys(data[n=12+1000]=f6b06000) AtapiVirtToPhysAddr_: f6b06000 -> 00000000:0c0a8000 ph data[12]=0:c0a8000 (fff) get Phys(data[n=13+1000]=f6b07000) AtapiVirtToPhysAddr_: f6b07000 -> 00000000:0bdd9000 ph data[13]=0:bdd9000 (fff) get Phys(data[n=14+1000]=f6b08000) AtapiVirtToPhysAddr_: f6b08000 -> 00000000:005da000 ph data[14]=0:5da000 (fff) get Phys(data[n=15+1000]=f6b09000) AtapiVirtToPhysAddr_: f6b09000 -> 00000000:0b8d3000 set TERM ph data[15]=0:b8d3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1770, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff17f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff17f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b0a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b0a000) AtapiVirtToPhysAddr_: f6b0a000 -> 00000000:65f84000 ph data[0]=0:65f84000 (fff) get Phys(data[n=1+1000]=f6b0b000) AtapiVirtToPhysAddr_: f6b0b000 -> 00000000:02a5d000 ph data[1]=0:2a5d000 (fff) get Phys(data[n=2+1000]=f6b0c000) AtapiVirtToPhysAddr_: f6b0c000 -> 00000000:0be06000 ph data[2]=0:be06000 (fff) get Phys(data[n=3+1000]=f6b0d000) AtapiVirtToPhysAddr_: f6b0d000 -> 00000000:0bef7000 ph data[3]=0:bef7000 (fff) get Phys(data[n=4+1000]=f6b0e000) AtapiVirtToPhysAddr_: f6b0e000 -> 00000000:0bb38000 ph data[4]=0:bb38000 (fff) get Phys(data[n=5+1000]=f6b0f000) AtapiVirtToPhysAddr_: f6b0f000 -> 00000000:0b9a9000 ph data[5]=0:b9a9000 (fff) get Phys(data[n=6+1000]=f6b10000) AtapiVirtToPhysAddr_: f6b10000 -> 00000000:0beda000 ph data[6]=0:beda000 (fff) get Phys(data[n=7+1000]=f6b11000) AtapiVirtToPhysAddr_: f6b11000 -> 00000000:0bc3b000 ph data[7]=0:bc3b000 (fff) get Phys(data[n=8+1000]=f6b12000) AtapiVirtToPhysAddr_: f6b12000 -> 00000000:02a6c000 ph data[8]=0:2a6c000 (fff) get Phys(data[n=9+1000]=f6b13000) AtapiVirtToPhysAddr_: f6b13000 -> 00000000:02a4d000 ph data[9]=0:2a4d000 (fff) get Phys(data[n=10+1000]=f6b14000) AtapiVirtToPhysAddr_: f6b14000 -> 00000000:02dee000 ph data[10]=0:2dee000 (fff) get Phys(data[n=11+1000]=f6b15000) AtapiVirtToPhysAddr_: f6b15000 -> 00000000:02a2f000 ph data[11]=0:2a2f000 (fff) get Phys(data[n=12+1000]=f6b16000) AtapiVirtToPhysAddr_: f6b16000 -> 00000000:0bfc0000 ph data[12]=0:bfc0000 (fff) get Phys(data[n=13+1000]=f6b17000) AtapiVirtToPhysAddr_: f6b17000 -> 00000000:0bef1000 ph data[13]=0:bef1000 (fff) get Phys(data[n=14+1000]=f6b18000) AtapiVirtToPhysAddr_: f6b18000 -> 00000000:029aa000 ph data[14]=0:29aa000 (fff) get Phys(data[n=15+1000]=f6b19000) AtapiVirtToPhysAddr_: f6b19000 -> 00000000:02953000 set TERM ph data[15]=0:2953000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69480 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff17f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff1870, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff1870, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b1a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b1a000) AtapiVirtToPhysAddr_: f6b1a000 -> 00000000:02ab4000 ph data[0]=0:2ab4000 (fff) get Phys(data[n=1+1000]=f6b1b000) AtapiVirtToPhysAddr_: f6b1b000 -> 00000000:38d6d000 ph data[1]=0:38d6d000 (fff) get Phys(data[n=2+1000]=f6b1c000) AtapiVirtToPhysAddr_: f6b1c000 -> 00000000:02b86000 ph data[2]=0:2b86000 (fff) get Phys(data[n=3+1000]=f6b1d000) AtapiVirtToPhysAddr_: f6b1d000 -> 00000000:023f7000 ph data[3]=0:23f7000 (fff) get Phys(data[n=4+1000]=f6b1e000) AtapiVirtToPhysAddr_: f6b1e000 -> 00000000:0bf50000 ph data[4]=0:bf50000 (fff) get Phys(data[n=5+1000]=f6b1f000) AtapiVirtToPhysAddr_: f6b1f000 -> 00000000:afc49000 ph data[5]=0:afc49000 (fff) get Phys(data[n=6+1000]=f6b20000) AtapiVirtToPhysAddr_: f6b20000 -> 00000000:02a1a000 ph data[6]=0:2a1a000 (fff) get Phys(data[n=7+1000]=f6b21000) AtapiVirtToPhysAddr_: f6b21000 -> 00000000:0295b000 ph data[7]=0:295b000 (fff) get Phys(data[n=8+1000]=f6b22000) AtapiVirtToPhysAddr_: f6b22000 -> 00000000:023dc000 ph data[8]=0:23dc000 (fff) get Phys(data[n=9+1000]=f6b23000) AtapiVirtToPhysAddr_: f6b23000 -> 00000000:01f95000 ph data[9]=0:1f95000 (fff) get Phys(data[n=10+1000]=f6b24000) AtapiVirtToPhysAddr_: f6b24000 -> 00000000:02b46000 ph data[10]=0:2b46000 (fff) get Phys(data[n=11+1000]=f6b25000) AtapiVirtToPhysAddr_: f6b25000 -> 00000000:029c7000 ph data[11]=0:29c7000 (fff) get Phys(data[n=12+1000]=f6b26000) AtapiVirtToPhysAddr_: f6b26000 -> 00000000:02a80000 ph data[12]=0:2a80000 (fff) get Phys(data[n=13+1000]=f6b27000) AtapiVirtToPhysAddr_: f6b27000 -> 00000000:0baa9000 ph data[13]=0:baa9000 (fff) get Phys(data[n=14+1000]=f6b28000) AtapiVirtToPhysAddr_: f6b28000 -> 00000000:029b2000 ph data[14]=0:29b2000 (fff) get Phys(data[n=15+1000]=f6b29000) AtapiVirtToPhysAddr_: f6b29000 -> 00000000:023eb000 set TERM ph data[15]=0:23eb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff1870, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b69600 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38ff18f0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38ff18f0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b2a000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b2a000) AtapiVirtToPhysAddr_: f6b2a000 -> 00000000:02034000 ph data[0]=0:2034000 (fff) get Phys(data[n=1+1000]=f6b2b000) AtapiVirtToPhysAddr_: f6b2b000 -> 00000000:01ea5000 ph data[1]=0:1ea5000 (fff) get Phys(data[n=2+1000]=f6b2c000) AtapiVirtToPhysAddr_: f6b2c000 -> 00000000:38d56000 ph data[2]=0:38d56000 (fff) get Phys(data[n=3+1000]=f6b2d000) AtapiVirtToPhysAddr_: f6b2d000 -> 00000000:02a3f000 ph data[3]=0:2a3f000 (fff) get Phys(data[n=4+1000]=f6b2e000) AtapiVirtToPhysAddr_: f6b2e000 -> 00000000:02aa8000 ph data[4]=0:2aa8000 (fff) get Phys(data[n=5+1000]=f6b2f000) AtapiVirtToPhysAddr_: f6b2f000 -> 00000000:0be91000 ph data[5]=0:be91000 (fff) get Phys(data[n=6+1000]=f6b30000) AtapiVirtToPhysAddr_: f6b30000 -> 00000000:029ba000 ph data[6]=0:29ba000 (fff) get Phys(data[n=7+1000]=f6b31000) AtapiVirtToPhysAddr_: f6b31000 -> 00000000:02963000 ph data[7]=0:2963000 (fff) get Phys(data[n=8+1000]=f6b32000) AtapiVirtToPhysAddr_: f6b32000 -> 00000000:0b9a4000 ph data[8]=0:b9a4000 (fff) get Phys(data[n=9+1000]=f6b33000) AtapiVirtToPhysAddr_: f6b33000 -> 00000000:afc85000 ph data[9]=0:afc85000 (fff) get Phys(data[n=10+1000]=f6b34000) AtapiVirtToPhysAddr_: f6b34000 -> 00000000:02d16000 ph data[10]=0:2d16000 (fff) get Phys(data[n=11+1000]=f6b35000) AtapiVirtToPhysAddr_: f6b35000 -> 00000000:01e1f000 ph data[11]=0:1e1f000 (fff) get Phys(data[n=12+1000]=f6b36000) AtapiVirtToPhysAddr_: f6b36000 -> 00000000:02ae8000 ph data[12]=0:2ae8000 (fff) get Phys(data[n=13+1000]=f6b37000) AtapiVirtToPhysAddr_: f6b37000 -> 00000000:023c9000 ph data[13]=0:23c9000 (fff) get Phys(data[n=14+1000]=f6b38000) AtapiVirtToPhysAddr_: f6b38000 -> 00000000:02a72000 ph data[14]=0:2a72000 (fff) get Phys(data[n=15+1000]=f6b39000) AtapiVirtToPhysAddr_: f6b39000 -> 00000000:023e3000 set TERM ph data[15]=0:23e3000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6b694d0 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38ff18f0, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 fixme:(dll/win32/comctl32/toolbar.c:5624) [000800FA] response 30474241 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b fixme:(dll/win32/comctl32/toolbar.c:5624) [000800FA] response 2007516254 not handled to NM_CUSTOMDRAW (CDDS_PREERASE) fixme:(dll/win32/comctl32/toolbar.c:5661) [000800FA] response 2079778261 not handled to NM_CUSTOMDRAW (CDDS_POSTERASE) (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b traywnd.cpp:2906: Unexpected failure 80004005. (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (win32ss/user/winsrv/usersrv/shutdown.c:619) SrvExitWindowsEx(ClientId: 1b4.1b8, Flags: 0x2) (win32ss/user/ntuser/shutdown.c:129) err: NotifyLogon(0x3, 0x0) (win32ss/user/winsrv/usersrv/shutdown.c:672) NtUserSetInformationThread returned STATUS_PENDING TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff230 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe87b0, OrigWordsRequested 0x6700, DevSize 0x67 IdeReadWrite (REQ): Starting sector is 38fe87b0, Number of WORDS 0x6700, DevSize 0x67 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6fb2000, count ce00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6fb2000) AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:afcbc000 ph data[0]=0:afcbc000 (fff) get Phys(data[n=1+1000]=f6fb3000) AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:28695000 ph data[1]=0:28695000 (fff) get Phys(data[n=2+1000]=f6fb4000) AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:025be000 ph data[2]=0:25be000 (fff) get Phys(data[n=3+1000]=f6fb5000) AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:2844f000 ph data[3]=0:2844f000 (fff) get Phys(data[n=4+1000]=f6fb6000) AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:285f8000 ph data[4]=0:285f8000 (fff) get Phys(data[n=5+1000]=f6fb7000) AtapiVirtToPhysAddr_: f6fb7000 -> 00000000:28719000 ph data[5]=0:28719000 (fff) get Phys(data[n=6+1000]=f6fb8000) AtapiVirtToPhysAddr_: f6fb8000 -> 00000000:2871a000 ph data[5]=0:28719000 (1fff) get Phys(data[n=6+2000]=f6fb9000) AtapiVirtToPhysAddr_: f6fb9000 -> 00000000:02593000 ph data[6]=0:2593000 (fff) get Phys(data[n=7+1000]=f6fba000) AtapiVirtToPhysAddr_: f6fba000 -> 00000000:0200c000 ph data[7]=0:200c000 (fff) get Phys(data[n=8+1000]=f6fbb000) AtapiVirtToPhysAddr_: f6fbb000 -> 00000000:2869d000 ph data[8]=0:2869d000 (fff) get Phys(data[n=9+1000]=f6fbc000) AtapiVirtToPhysAddr_: f6fbc000 -> 00000000:285e6000 ph data[9]=0:285e6000 (fff) get Phys(data[n=10+1000]=f6fbd000) AtapiVirtToPhysAddr_: f6fbd000 -> 00000000:020e7000 ph data[10]=0:20e7000 (fff) get Phys(data[n=11+1000]=f6fbe000) AtapiVirtToPhysAddr_: f6fbe000 -> 00000000:28600000 set TERM ph data[11]=0:28600000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe87b0, Count 0x67(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xc, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 6700, WordsLeft 6700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered ce00, full size ce00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff60c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fe87b0, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fe87b0, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c40000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:023e7000 ph data[0]=0:23e7000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:3f728000 set TERM ph data[1]=0:3f728000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fe87b0, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (win32ss/user/winsrv/usersrv/shutdown.c:619) SrvExitWindowsEx(ClientId: a0.2d4, Flags: 0x200) (ntoskrnl/ps/query.c:1552) Privilege to change priority from f to d lacking (win32ss/user/winsrv/usersrv/shutdown.c:786) Terminating process 298 (\Device\Harddisk0\Partition3\ReactOS\system32\kbswitch.exe) (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 00020110 when the thread is in cleanup! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085f8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:647a8000 ph data[0]=0:647a8000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:018e9000 set TERM ph data[1]=0:18e9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085f8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4170, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4170, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:02a90000 ph data[0]=0:2a90000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:00209000 set TERM ph data[1]=0:209000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4170, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085f8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:02998000 ph data[0]=0:2998000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38969000 set TERM ph data[1]=0:38969000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c085f8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fb4170, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4170, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b82000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:01ff0000 ph data[0]=0:1ff0000 (fff) get Phys(data[n=1+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:00239000 set TERM ph data[1]=0:239000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4170, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (win32ss/user/winsrv/usersrv/shutdown.c:786) Terminating process 1b4 (\Device\Harddisk0\Partition3\ReactOS\explorer.exe) (win32ss/user/ntuser/window.c:2741) err: Destroying the ShellWindow! (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/desktop.c:1317) err: ptiLastInput is CLEARED!! (win32ss/user/ntuser/message.c:1264) err: Attempted to post message to window 000200A6 when the thread is in cleanup! (win32ss/user/ntuser/shutdown.c:129) err: NotifyLogon(0x200, 0x0) [NFS41_NP][aglo] NPOpenEnum [NFS41_NP][aglo] NPOpenEnum returning Status 0 [NFS41_NP][aglo] NPEnumResource [NFS41_NP][aglo] NPEnumResource Count Requested -1 [NFS41_NP]OpenSharedMemory: OpenFileMapping failed [NFS41_NP]OpenSharedMemory: return dwStatus: 2 [NFS41_NP][aglo] NPEnumResource entries returned: 0 [NFS41_NP][aglo] NPCloseEnum (win32ss/user/ntuser/msgqueue.c:1277) err: NB Receiving Thread woken up dead! (win32ss/user/ntuser/desktop.c:3221) err: Attempted to change thread desktop although the thread has windows! (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (win32ss/user/winsrv/usersrv/init.c:162) We are logged off (win32ss/user/winsrv/usersrv/shutdown.c:619) SrvExitWindowsEx(ClientId: a0.304, Flags: 0x10204) (ntoskrnl/ps/query.c:1552) Privilege to change priority from f to d lacking (win32ss/user/ntuser/shutdown.c:129) err: NotifyLogon(0x10204, 0x0) (ntoskrnl/config/cmapi.c:2437) Open sub keys: 24 (dll/win32/userenv/profile.c:1627) RegUnLoadKeyW() failed (Error 5) (win32ss/user/winsrv/usersrv/shutdown.c:619) SrvExitWindowsEx(ClientId: a0.314, Flags: 0x202) WARNING: NotifyGenericProcessForShutdown at win32ss/user/winsrv/consrv/shutdown.c:37 is UNIMPLEMENTED! (win32ss/user/winsrv/consrv/shutdown.c:58) Terminating process c0 (\Device\Harddisk0\Partition3\ReactOS\system32\lsass.exe) (win32ss/user/winsrv/consrv/shutdown.c:58) Terminating process e4 (\Device\Harddisk0\Partition3\ReactOS\system32\eventlog.exe) (win32ss/user/winsrv/consrv/shutdown.c:58) Terminating process 160 (\Device\Harddisk0\Partition3\ReactOS\system32\rpcss.exe) (win32ss/user/winsrv/consrv/shutdown.c:58) Terminating process 1a8 (\Device\Harddisk0\Partition3\ReactOS\system32\svchost.exe) (win32ss/user/winsrv/consrv/shutdown.c:58) Terminating process 1c0 (\Device\Harddisk0\Partition3\ReactOS\system32\svchost.exe) (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (win32ss/user/winsrv/consrv/shutdown.c:58) Terminating process 1e0 (\Device\Harddisk0\Partition3\ReactOS\system32\wlansvc.exe) (win32ss/user/winsrv/consrv/shutdown.c:58) Terminating process 234 (\Device\Harddisk0\Partition3\ReactOS\system32\spoolsv.exe) (win32ss/user/winsrv/consrv/shutdown.c:58) Terminating process b8 (\Device\Harddisk0\Partition3\ReactOS\system32\services.exe) (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (win32ss/user/ntuser/shutdown.c:129) err: NotifyLogon(0x303, 0x0) [NFS41_NP][aglo] NPOpenEnum [NFS41_NP][aglo] NPOpenEnum returning Status 0 [NFS41_NP][aglo] NPEnumResource [NFS41_NP][aglo] NPEnumResource Count Requested -1 [NFS41_NP]OpenSharedMemory: OpenFileMapping failed [NFS41_NP]OpenSharedMemory: return dwStatus: 2 [NFS41_NP][aglo] NPEnumResource entries returned: 0 [NFS41_NP][aglo] NPCloseEnum err:(base/system/winlogon/sas.c:1100) Shutting down NT... (win32ss/user/ntuser/msgqueue.c:2300) err: Thread Cleanup Sent Messages E174ED58 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bc60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bc60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:12866000 ph data[0]=0:12866000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:121af000 ph data[1]=0:121af000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:12870000 ph data[2]=0:12870000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:12211000 ph data[3]=0:12211000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:1287a000 ph data[4]=0:1287a000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:12233000 ph data[5]=0:12233000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:1284c000 ph data[6]=0:1284c000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:1221d000 ph data[7]=0:1221d000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:1285e000 ph data[8]=0:1285e000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:1215f000 ph data[9]=0:1215f000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:12868000 ph data[10]=0:12868000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:12209000 ph data[11]=0:12209000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:12872000 ph data[12]=0:12872000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:1222b000 ph data[13]=0:1222b000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:12844000 ph data[14]=0:12844000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:12215000 set TERM ph data[15]=0:12215000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bc60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:12856000 ph data[0]=0:12856000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:12877000 ph data[1]=0:12877000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:12860000 ph data[2]=0:12860000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:12201000 ph data[3]=0:12201000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:1286a000 ph data[4]=0:1286a000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:12223000 ph data[5]=0:12223000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:1283c000 ph data[6]=0:1283c000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:1220d000 ph data[7]=0:1220d000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:1284e000 ph data[8]=0:1284e000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:1286f000 ph data[9]=0:1286f000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:12858000 ph data[10]=0:12858000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:121f9000 ph data[11]=0:121f9000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:12862000 ph data[12]=0:12862000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:1221b000 ph data[13]=0:1221b000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:1211c000 ph data[14]=0:1211c000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:12205000 set TERM ph data[15]=0:12205000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bd60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bd60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:12846000 ph data[0]=0:12846000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:12867000 ph data[1]=0:12867000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:12850000 ph data[2]=0:12850000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:121b1000 ph data[3]=0:121b1000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:1285a000 ph data[4]=0:1285a000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:12213000 ph data[5]=0:12213000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:12114000 ph data[6]=0:12114000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:121fd000 ph data[7]=0:121fd000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:1283e000 ph data[8]=0:1283e000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:1285f000 ph data[9]=0:1285f000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:12848000 ph data[10]=0:12848000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:121a1000 ph data[11]=0:121a1000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:12852000 ph data[12]=0:12852000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:1220b000 ph data[13]=0:1220b000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:1210c000 ph data[14]=0:1210c000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:1207d000 set TERM ph data[15]=0:1207d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff46c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bde0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bde0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:12116000 ph data[0]=0:12116000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:12857000 ph data[1]=0:12857000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:12118000 ph data[2]=0:12118000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:12879000 ph data[3]=0:12879000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:1284a000 ph data[4]=0:1284a000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:12203000 ph data[5]=0:12203000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:12104000 ph data[6]=0:12104000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:12875000 ph data[7]=0:12875000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:1210e000 ph data[8]=0:1210e000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:1284f000 ph data[9]=0:1284f000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:12110000 ph data[10]=0:12110000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:12871000 ph data[11]=0:12871000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:12842000 ph data[12]=0:12842000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:1287b000 ph data[13]=0:1287b000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:120fc000 ph data[14]=0:120fc000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:1286d000 set TERM ph data[15]=0:1286d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bd60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7801a14 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bde0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960be60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960be60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:15d87000 ph data[0]=0:15d87000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:13068000 ph data[1]=0:13068000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:10bc1000 ph data[2]=0:10bc1000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:02752000 ph data[3]=0:2752000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:10ab3000 ph data[4]=0:10ab3000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:11a94000 ph data[5]=0:11a94000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:121e5000 ph data[6]=0:121e5000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:0276e000 ph data[7]=0:276e000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:15d7f000 ph data[8]=0:15d7f000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:1d3f0000 ph data[9]=0:1d3f0000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:11ae1000 ph data[10]=0:11ae1000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:1223a000 ph data[11]=0:1223a000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:10aab000 ph data[12]=0:10aab000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:12084000 ph data[13]=0:12084000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:15d7d000 ph data[14]=0:15d7d000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:12fc6000 set TERM ph data[15]=0:12fc6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960be60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:02907000 ph data[0]=0:2907000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:12fd0000 ph data[1]=0:12fd0000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:02749000 ph data[2]=0:2749000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:15e2a000 ph data[3]=0:15e2a000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:15d83000 ph data[4]=0:15d83000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:11ad4000 ph data[5]=0:11ad4000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:15d75000 ph data[6]=0:15d75000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:12fbe000 ph data[7]=0:12fbe000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:1220f000 ph data[8]=0:1220f000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:12fc8000 ph data[9]=0:12fc8000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:121c1000 ph data[10]=0:121c1000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:12fda000 ph data[11]=0:12fda000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:121cb000 ph data[12]=0:121cb000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:1234c000 ph data[13]=0:1234c000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:10955000 ph data[14]=0:10955000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:12fb6000 set TERM ph data[15]=0:12fb6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bf60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bf60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:12207000 ph data[0]=0:12207000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:12fc0000 ph data[1]=0:12fc0000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:121b9000 ph data[2]=0:121b9000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:12fd2000 ph data[3]=0:12fd2000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:121c3000 ph data[4]=0:121c3000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:12344000 ph data[5]=0:12344000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:1210d000 ph data[6]=0:1210d000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:137de000 ph data[7]=0:137de000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:11b4f000 ph data[8]=0:11b4f000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:12fb8000 ph data[9]=0:12fb8000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:12231000 ph data[10]=0:12231000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:12fca000 ph data[11]=0:12fca000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:1223b000 ph data[12]=0:1223b000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:1233c000 ph data[13]=0:1233c000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:11aad000 ph data[14]=0:11aad000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:137e6000 set TERM ph data[15]=0:137e6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bf60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960bfe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960bfe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:10b7f000 ph data[0]=0:10b7f000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:12fb0000 ph data[1]=0:12fb0000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:12229000 ph data[2]=0:12229000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:12fc2000 ph data[3]=0:12fc2000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:10b73000 ph data[4]=0:10b73000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:12334000 ph data[5]=0:12334000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:11aa5000 ph data[6]=0:11aa5000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:120de000 ph data[7]=0:120de000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:1305f000 ph data[8]=0:1305f000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:137e0000 ph data[9]=0:137e0000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:12221000 ph data[10]=0:12221000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:120e2000 ph data[11]=0:120e2000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:10873000 ph data[12]=0:10873000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:1232c000 ph data[13]=0:1232c000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:11a9d000 ph data[14]=0:11a9d000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:120e6000 set TERM ph data[15]=0:120e6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960bfe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5e4f948 TopLevel (3), AtaReq 0xb6781108 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:28433000 ph data[0]=0:28433000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:12854000 ph data[1]=0:12854000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:28785000 ph data[2]=0:28785000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:2879e000 ph data[3]=0:2879e000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:2876f000 ph data[4]=0:2876f000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:28438000 ph data[5]=0:28438000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:28771000 ph data[6]=0:28771000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:287ea000 ph data[7]=0:287ea000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:28793000 ph data[8]=0:28793000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:1285c000 ph data[9]=0:1285c000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:2877d000 ph data[10]=0:2877d000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:28796000 ph data[11]=0:28796000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:28767000 ph data[12]=0:28767000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:287a8000 ph data[13]=0:287a8000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:28769000 ph data[14]=0:28769000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:287da000 set TERM ph data[15]=0:287da000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c0e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c0e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:2878b000 ph data[0]=0:2878b000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:12864000 ph data[1]=0:12864000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:28775000 ph data[2]=0:28775000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:2878e000 ph data[3]=0:2878e000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:2875f000 ph data[4]=0:2875f000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:287a0000 ph data[5]=0:287a0000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:28761000 ph data[6]=0:28761000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:287d2000 ph data[7]=0:287d2000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:11ac3000 ph data[8]=0:11ac3000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:287cc000 ph data[9]=0:287cc000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:2842d000 ph data[10]=0:2842d000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:28786000 ph data[11]=0:28786000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:28757000 ph data[12]=0:28757000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:28798000 ph data[13]=0:28798000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:28759000 ph data[14]=0:28759000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:287ca000 set TERM ph data[15]=0:287ca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c0e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:11abb000 ph data[0]=0:11abb000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:2876c000 ph data[1]=0:2876c000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:1096d000 ph data[2]=0:1096d000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:15e2e000 ph data[3]=0:15e2e000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:12fdf000 ph data[4]=0:12fdf000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:15e28000 ph data[5]=0:15e28000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:11ab9000 ph data[6]=0:11ab9000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:120fa000 ph data[7]=0:120fa000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:11ab3000 ph data[8]=0:11ab3000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:11acc000 ph data[9]=0:11acc000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:11a8d000 ph data[10]=0:11a8d000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:15e26000 ph data[11]=0:15e26000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:12fd7000 ph data[12]=0:12fd7000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:15e20000 ph data[13]=0:15e20000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:11ab1000 ph data[14]=0:11ab1000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:15e22000 set TERM ph data[15]=0:15e22000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c160, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c1e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c1e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:2866b000 ph data[0]=0:2866b000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:15e34000 ph data[1]=0:15e34000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:12fe5000 ph data[2]=0:12fe5000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:15e1e000 ph data[3]=0:15e1e000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:12fcf000 ph data[4]=0:12fcf000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:15e18000 ph data[5]=0:15e18000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:11aa9000 ph data[6]=0:11aa9000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:15e1a000 ph data[7]=0:15e1a000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:28683000 ph data[8]=0:28683000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:28604000 ph data[9]=0:28604000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:286cd000 ph data[10]=0:286cd000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:2867e000 ph data[11]=0:2867e000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:2869f000 ph data[12]=0:2869f000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:28680000 ph data[13]=0:28680000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:28471000 ph data[14]=0:28471000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:287f2000 set TERM ph data[15]=0:287f2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4e4 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c1e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:28aeb000 ph data[0]=0:28aeb000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:2857c000 ph data[1]=0:2857c000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:2863d000 ph data[2]=0:2863d000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:28aee000 ph data[3]=0:28aee000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:28aff000 ph data[4]=0:28aff000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:28af0000 ph data[5]=0:28af0000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:284b1000 ph data[6]=0:284b1000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:284b2000 ph data[6]=0:284b1000 (1fff) get Phys(data[n=7+2000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:28af3000 ph data[7]=0:28af3000 (fff) get Phys(data[n=8+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:28584000 ph data[8]=0:28584000 (fff) get Phys(data[n=9+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:28645000 ph data[9]=0:28645000 (fff) get Phys(data[n=10+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:28af6000 ph data[10]=0:28af6000 (fff) get Phys(data[n=11+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:28b07000 ph data[11]=0:28b07000 (fff) get Phys(data[n=12+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:28af8000 ph data[12]=0:28af8000 (fff) get Phys(data[n=13+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:28559000 ph data[13]=0:28559000 (fff) get Phys(data[n=14+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:284ba000 set TERM ph data[14]=0:284ba000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c260, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c2e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c2e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:28afb000 ph data[0]=0:28afb000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:284b4000 ph data[1]=0:284b4000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:2864d000 ph data[2]=0:2864d000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:28afe000 ph data[3]=0:28afe000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:284a7000 ph data[4]=0:284a7000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:28b00000 ph data[5]=0:28b00000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:28561000 ph data[6]=0:28561000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:284c2000 ph data[7]=0:284c2000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:28b03000 ph data[8]=0:28b03000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:284bc000 ph data[9]=0:284bc000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:28ad5000 ph data[10]=0:28ad5000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:28b06000 ph data[11]=0:28b06000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:284af000 ph data[12]=0:284af000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:28b08000 ph data[13]=0:28b08000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:28569000 ph data[14]=0:28569000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:284ca000 set TERM ph data[15]=0:284ca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c360, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c360, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:28b0b000 ph data[0]=0:28b0b000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:284c4000 ph data[1]=0:284c4000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:28add000 ph data[2]=0:28add000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:284f6000 ph data[3]=0:284f6000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:2854f000 ph data[4]=0:2854f000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:28b10000 ph data[5]=0:28b10000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:28571000 ph data[6]=0:28571000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:284d2000 ph data[7]=0:284d2000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:28b13000 ph data[8]=0:28b13000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:284cc000 ph data[9]=0:284cc000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:28ae5000 ph data[10]=0:28ae5000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:284a6000 ph data[11]=0:284a6000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:28557000 ph data[12]=0:28557000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:284a8000 ph data[13]=0:284a8000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:28579000 ph data[14]=0:28579000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:284da000 set TERM ph data[15]=0:284da000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c3e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c3e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:284a3000 ph data[0]=0:284a3000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:284d4000 ph data[1]=0:284d4000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:28aed000 ph data[2]=0:28aed000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:284ae000 ph data[3]=0:284ae000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:2855f000 ph data[4]=0:2855f000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:284b0000 ph data[5]=0:284b0000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:28581000 ph data[6]=0:28581000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:284e2000 ph data[7]=0:284e2000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:284ab000 ph data[8]=0:284ab000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:284dc000 ph data[9]=0:284dc000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:28af5000 ph data[10]=0:28af5000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:28556000 ph data[11]=0:28556000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:28567000 ph data[12]=0:28567000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:28560000 ph data[13]=0:28560000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:284b9000 ph data[14]=0:284b9000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:2854a000 set TERM ph data[15]=0:2854a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c2e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c360, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c3e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:285e3000 ph data[0]=0:285e3000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:286bc000 ph data[1]=0:286bc000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:2848d000 ph data[2]=0:2848d000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:2848e000 ph data[2]=0:2848d000 (1fff) get Phys(data[n=3+2000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:28587000 ph data[3]=0:28587000 (fff) get Phys(data[n=4+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:285e8000 ph data[4]=0:285e8000 (fff) get Phys(data[n=5+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:28599000 ph data[5]=0:28599000 (fff) get Phys(data[n=6+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:286c2000 ph data[6]=0:286c2000 (fff) get Phys(data[n=7+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:28493000 ph data[7]=0:28493000 (fff) get Phys(data[n=8+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:286c4000 ph data[8]=0:286c4000 (fff) get Phys(data[n=9+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:285bd000 ph data[9]=0:285bd000 (fff) get Phys(data[n=10+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:28496000 ph data[10]=0:28496000 (fff) get Phys(data[n=11+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:2858f000 ph data[11]=0:2858f000 (fff) get Phys(data[n=12+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:28490000 ph data[12]=0:28490000 (fff) get Phys(data[n=13+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:285a1000 ph data[13]=0:285a1000 (fff) get Phys(data[n=14+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:286ca000 set TERM ph data[14]=0:286ca000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c460, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0xf, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c4e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c4e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:2849b000 ph data[0]=0:2849b000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:286cc000 ph data[1]=0:286cc000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:285c5000 ph data[2]=0:285c5000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:2849e000 ph data[3]=0:2849e000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:28597000 ph data[4]=0:28597000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:28498000 ph data[5]=0:28498000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:285a9000 ph data[6]=0:285a9000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:286d2000 ph data[7]=0:286d2000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:28523000 ph data[8]=0:28523000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:286d4000 ph data[9]=0:286d4000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:285cd000 ph data[10]=0:285cd000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:2851e000 ph data[11]=0:2851e000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:2859f000 ph data[12]=0:2859f000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:284a0000 ph data[13]=0:284a0000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:286a9000 ph data[14]=0:286a9000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:286da000 set TERM ph data[15]=0:286da000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:2852b000 ph data[0]=0:2852b000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:2a24c000 ph data[1]=0:2a24c000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:2b7ed000 ph data[2]=0:2b7ed000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:2b7c6000 ph data[3]=0:2b7c6000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:2852f000 ph data[4]=0:2852f000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:28520000 ph data[5]=0:28520000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:285b1000 ph data[6]=0:285b1000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:28492000 ph data[7]=0:28492000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:2b7eb000 ph data[8]=0:2b7eb000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:2a254000 ph data[9]=0:2a254000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:2b7f5000 ph data[10]=0:2b7f5000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:2b7ce000 ph data[11]=0:2b7ce000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:2a2d7000 ph data[12]=0:2a2d7000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:2b7f8000 ph data[13]=0:2b7f8000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:2a2f9000 ph data[14]=0:2a2f9000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:2a25a000 set TERM ph data[15]=0:2a25a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c4e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c5e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c5e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:2b7f3000 ph data[0]=0:2b7f3000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:2a25c000 ph data[1]=0:2a25c000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:2b7fd000 ph data[2]=0:2b7fd000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:2b7d6000 ph data[3]=0:2b7d6000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:2a2df000 ph data[4]=0:2a2df000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:2b800000 ph data[5]=0:2b800000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2a241000 ph data[6]=0:2a241000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:2a262000 ph data[7]=0:2a262000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:28fd3000 ph data[8]=0:28fd3000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:2a264000 ph data[9]=0:2a264000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:2b805000 ph data[10]=0:2b805000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:2b7de000 ph data[11]=0:2b7de000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:2a2e7000 ph data[12]=0:2a2e7000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:2a238000 ph data[13]=0:2a238000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:2a249000 ph data[14]=0:2a249000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:2a26a000 set TERM ph data[15]=0:2a26a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c560, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c5e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:3f70f000 ph data[0]=0:3f70f000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:3f840000 ph data[1]=0:3f840000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:3f891000 ph data[2]=0:3f891000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:3f772000 ph data[3]=0:3f772000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:3f8c3000 ph data[4]=0:3f8c3000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:3f74c000 ph data[5]=0:3f74c000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:3f785000 ph data[6]=0:3f785000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:3f856000 ph data[7]=0:3f856000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:3f897000 ph data[8]=0:3f897000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:3f848000 ph data[9]=0:3f848000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:3f6c9000 ph data[10]=0:3f6c9000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:3f77a000 ph data[11]=0:3f77a000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:3f8cb000 ph data[12]=0:3f8cb000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:3f754000 ph data[13]=0:3f754000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:3f705000 ph data[14]=0:3f705000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:3f85e000 set TERM ph data[15]=0:3f85e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:3f89f000 ph data[0]=0:3f89f000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:3f850000 ph data[1]=0:3f850000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:3f6d1000 ph data[2]=0:3f6d1000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:3f782000 ph data[3]=0:3f782000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:3f71b000 ph data[4]=0:3f71b000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:3f75c000 ph data[5]=0:3f75c000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:3f70d000 ph data[6]=0:3f70d000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:3f736000 ph data[7]=0:3f736000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:3f8a7000 ph data[8]=0:3f8a7000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:3f858000 ph data[9]=0:3f858000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:3f6d9000 ph data[10]=0:3f6d9000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:3f78a000 ph data[11]=0:3f78a000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:3f723000 ph data[12]=0:3f723000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:3f764000 ph data[13]=0:3f764000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:3f895000 ph data[14]=0:3f895000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:3f73e000 set TERM ph data[15]=0:3f73e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:3f8af000 ph data[0]=0:3f8af000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:3f860000 ph data[1]=0:3f860000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:3f929000 ph data[2]=0:3f929000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:3f70a000 ph data[3]=0:3f70a000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:3f86b000 ph data[4]=0:3f86b000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:3f76c000 ph data[5]=0:3f76c000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:3f89d000 ph data[6]=0:3f89d000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:3f746000 ph data[7]=0:3f746000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:3f8b7000 ph data[8]=0:3f8b7000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:3f868000 ph data[9]=0:3f868000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:3f931000 ph data[10]=0:3f931000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:3f89a000 ph data[11]=0:3f89a000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:3f873000 ph data[12]=0:3f873000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:3f774000 ph data[13]=0:3f774000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:3f8a5000 ph data[14]=0:3f8a5000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:3f78e000 set TERM ph data[15]=0:3f78e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c6e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c7e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c7e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:3f8bf000 ph data[0]=0:3f8bf000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:3f738000 ph data[1]=0:3f738000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:3f939000 ph data[2]=0:3f939000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:3f8a2000 ph data[3]=0:3f8a2000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:3f87b000 ph data[4]=0:3f87b000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:3f77c000 ph data[5]=0:3f77c000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3f8ad000 ph data[6]=0:3f8ad000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:3f796000 ph data[7]=0:3f796000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:3f717000 ph data[8]=0:3f717000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:3f740000 ph data[9]=0:3f740000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:3f941000 ph data[10]=0:3f941000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:3f8aa000 ph data[11]=0:3f8aa000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:3f883000 ph data[12]=0:3f883000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:3f784000 ph data[13]=0:3f784000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:3f8b5000 ph data[14]=0:3f8b5000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:3f81e000 set TERM ph data[15]=0:3f81e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c7e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5ddd7c8 TopLevel (3), AtaReq 0xb6783138 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f9143c, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f9143c, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:00f3e000 ph data[0]=0:f3e000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:00f3f000 ph data[0]=0:f3e000 (1fff) get Phys(data[n=1+2000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:00f18000 ph data[1]=0:f18000 (fff) get Phys(data[n=2+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:00f21000 ph data[2]=0:f21000 (fff) get Phys(data[n=3+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:00f2a000 ph data[3]=0:f2a000 (fff) get Phys(data[n=4+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:00f33000 ph data[4]=0:f33000 (fff) get Phys(data[n=5+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:00f34000 ph data[4]=0:f33000 (1fff) get Phys(data[n=5+2000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:00f35000 ph data[4]=0:f33000 (2fff) get Phys(data[n=5+3000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:00f36000 ph data[4]=0:f33000 (3fff) get Phys(data[n=5+4000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:00f37000 ph data[4]=0:f33000 (4fff) get Phys(data[n=5+5000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:00f10000 ph data[5]=0:f10000 (fff) get Phys(data[n=6+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:00f19000 ph data[6]=0:f19000 (fff) get Phys(data[n=7+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:00f22000 ph data[7]=0:f22000 (fff) get Phys(data[n=8+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:00f2b000 ph data[8]=0:f2b000 (fff) get Phys(data[n=9+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:00f2c000 ph data[8]=0:f2b000 (1fff) get Phys(data[n=9+2000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:00f2d000 set TERM ph data[8]=0:f2b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f9143c, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f914bc, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f914bc, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:00f2e000 ph data[0]=0:f2e000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:00f2f000 ph data[0]=0:f2e000 (1fff) get Phys(data[n=1+2000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:00f08000 ph data[1]=0:f08000 (fff) get Phys(data[n=2+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:00f11000 ph data[2]=0:f11000 (fff) get Phys(data[n=3+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:00f1a000 ph data[3]=0:f1a000 (fff) get Phys(data[n=4+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:00f23000 ph data[4]=0:f23000 (fff) get Phys(data[n=5+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:00f24000 ph data[4]=0:f23000 (1fff) get Phys(data[n=5+2000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:00f25000 ph data[4]=0:f23000 (2fff) get Phys(data[n=5+3000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:00f26000 ph data[4]=0:f23000 (3fff) get Phys(data[n=5+4000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:00f27000 ph data[4]=0:f23000 (4fff) get Phys(data[n=5+5000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:00f00000 ph data[5]=0:f00000 (fff) get Phys(data[n=6+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:00f09000 ph data[6]=0:f09000 (fff) get Phys(data[n=7+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:00f12000 ph data[7]=0:f12000 (fff) get Phys(data[n=8+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:00f1b000 ph data[8]=0:f1b000 (fff) get Phys(data[n=9+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:00f1c000 ph data[8]=0:f1b000 (1fff) get Phys(data[n=9+2000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:00f1d000 set TERM ph data[8]=0:f1b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f9153c, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f9153c, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:00f1e000 ph data[0]=0:f1e000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:00f1f000 ph data[0]=0:f1e000 (1fff) get Phys(data[n=1+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:00ef8000 ph data[1]=0:ef8000 (fff) get Phys(data[n=2+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:00f01000 ph data[2]=0:f01000 (fff) get Phys(data[n=3+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:00f0a000 ph data[3]=0:f0a000 (fff) get Phys(data[n=4+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:00f13000 ph data[4]=0:f13000 (fff) get Phys(data[n=5+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:00f14000 ph data[4]=0:f13000 (1fff) get Phys(data[n=5+2000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:00f15000 ph data[4]=0:f13000 (2fff) get Phys(data[n=5+3000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:00f16000 ph data[4]=0:f13000 (3fff) get Phys(data[n=5+4000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:00f17000 ph data[4]=0:f13000 (4fff) get Phys(data[n=5+5000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:00ef0000 ph data[5]=0:ef0000 (fff) get Phys(data[n=6+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:00ef9000 ph data[6]=0:ef9000 (fff) get Phys(data[n=7+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:00f02000 ph data[7]=0:f02000 (fff) get Phys(data[n=8+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:00f0b000 ph data[8]=0:f0b000 (fff) get Phys(data[n=9+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:00f0c000 ph data[8]=0:f0b000 (1fff) get Phys(data[n=9+2000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:00f0d000 set TERM ph data[8]=0:f0b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f914bc, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f915bc, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f915bc, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:00f0e000 ph data[0]=0:f0e000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:00f0f000 ph data[0]=0:f0e000 (1fff) get Phys(data[n=1+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:00ee8000 ph data[1]=0:ee8000 (fff) get Phys(data[n=2+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:00ef1000 ph data[2]=0:ef1000 (fff) get Phys(data[n=3+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:00efa000 ph data[3]=0:efa000 (fff) get Phys(data[n=4+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:00f03000 ph data[4]=0:f03000 (fff) get Phys(data[n=5+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:00f04000 ph data[4]=0:f03000 (1fff) get Phys(data[n=5+2000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:00f05000 ph data[4]=0:f03000 (2fff) get Phys(data[n=5+3000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:00f06000 ph data[4]=0:f03000 (3fff) get Phys(data[n=5+4000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:00f07000 ph data[4]=0:f03000 (4fff) get Phys(data[n=5+5000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:00ee0000 ph data[5]=0:ee0000 (fff) get Phys(data[n=6+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:00ee9000 ph data[6]=0:ee9000 (fff) get Phys(data[n=7+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:00ef2000 ph data[7]=0:ef2000 (fff) get Phys(data[n=8+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:00efb000 ph data[8]=0:efb000 (fff) get Phys(data[n=9+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:00efc000 ph data[8]=0:efb000 (1fff) get Phys(data[n=9+2000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:00efd000 set TERM ph data[8]=0:efb000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f9153c, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93c1e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93c1e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:00f3e000 ph data[0]=0:f3e000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:00f3f000 ph data[0]=0:f3e000 (1fff) get Phys(data[n=1+2000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:00f18000 ph data[1]=0:f18000 (fff) get Phys(data[n=2+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:00f21000 ph data[2]=0:f21000 (fff) get Phys(data[n=3+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:00f2a000 ph data[3]=0:f2a000 (fff) get Phys(data[n=4+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:00f33000 ph data[4]=0:f33000 (fff) get Phys(data[n=5+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:00f34000 ph data[4]=0:f33000 (1fff) get Phys(data[n=5+2000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:00f35000 ph data[4]=0:f33000 (2fff) get Phys(data[n=5+3000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:00f36000 ph data[4]=0:f33000 (3fff) get Phys(data[n=5+4000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:00f37000 ph data[4]=0:f33000 (4fff) get Phys(data[n=5+5000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:00f10000 ph data[5]=0:f10000 (fff) get Phys(data[n=6+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:00f19000 ph data[6]=0:f19000 (fff) get Phys(data[n=7+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:00f22000 ph data[7]=0:f22000 (fff) get Phys(data[n=8+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:00f2b000 ph data[8]=0:f2b000 (fff) get Phys(data[n=9+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:00f2c000 ph data[8]=0:f2b000 (1fff) get Phys(data[n=9+2000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:00f2d000 set TERM ph data[8]=0:f2b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f915bc, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93c9e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93c9e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:00f2e000 ph data[0]=0:f2e000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:00f2f000 ph data[0]=0:f2e000 (1fff) get Phys(data[n=1+2000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:00f08000 ph data[1]=0:f08000 (fff) get Phys(data[n=2+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:00f11000 ph data[2]=0:f11000 (fff) get Phys(data[n=3+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:00f1a000 ph data[3]=0:f1a000 (fff) get Phys(data[n=4+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:00f23000 ph data[4]=0:f23000 (fff) get Phys(data[n=5+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:00f24000 ph data[4]=0:f23000 (1fff) get Phys(data[n=5+2000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:00f25000 ph data[4]=0:f23000 (2fff) get Phys(data[n=5+3000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:00f26000 ph data[4]=0:f23000 (3fff) get Phys(data[n=5+4000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:00f27000 ph data[4]=0:f23000 (4fff) get Phys(data[n=5+5000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:00f00000 ph data[5]=0:f00000 (fff) get Phys(data[n=6+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:00f09000 ph data[6]=0:f09000 (fff) get Phys(data[n=7+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:00f12000 ph data[7]=0:f12000 (fff) get Phys(data[n=8+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:00f1b000 ph data[8]=0:f1b000 (fff) get Phys(data[n=9+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:00f1c000 ph data[8]=0:f1b000 (1fff) get Phys(data[n=9+2000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:00f1d000 set TERM ph data[8]=0:f1b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93c1e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93d1e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93d1e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:00f1e000 ph data[0]=0:f1e000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:00f1f000 ph data[0]=0:f1e000 (1fff) get Phys(data[n=1+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:00ef8000 ph data[1]=0:ef8000 (fff) get Phys(data[n=2+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:00f01000 ph data[2]=0:f01000 (fff) get Phys(data[n=3+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:00f0a000 ph data[3]=0:f0a000 (fff) get Phys(data[n=4+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:00f13000 ph data[4]=0:f13000 (fff) get Phys(data[n=5+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:00f14000 ph data[4]=0:f13000 (1fff) get Phys(data[n=5+2000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:00f15000 ph data[4]=0:f13000 (2fff) get Phys(data[n=5+3000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:00f16000 ph data[4]=0:f13000 (3fff) get Phys(data[n=5+4000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:00f17000 ph data[4]=0:f13000 (4fff) get Phys(data[n=5+5000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:00ef0000 ph data[5]=0:ef0000 (fff) get Phys(data[n=6+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:00ef9000 ph data[6]=0:ef9000 (fff) get Phys(data[n=7+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:00f02000 ph data[7]=0:f02000 (fff) get Phys(data[n=8+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:00f0b000 ph data[8]=0:f0b000 (fff) get Phys(data[n=9+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:00f0c000 ph data[8]=0:f0b000 (1fff) get Phys(data[n=9+2000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:00f0d000 set TERM ph data[8]=0:f0b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4e4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93c9e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93d9e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93d9e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:00f0e000 ph data[0]=0:f0e000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:00f0f000 ph data[0]=0:f0e000 (1fff) get Phys(data[n=1+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:00ee8000 ph data[1]=0:ee8000 (fff) get Phys(data[n=2+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:00ef1000 ph data[2]=0:ef1000 (fff) get Phys(data[n=3+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:00efa000 ph data[3]=0:efa000 (fff) get Phys(data[n=4+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:00f03000 ph data[4]=0:f03000 (fff) get Phys(data[n=5+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:00f04000 ph data[4]=0:f03000 (1fff) get Phys(data[n=5+2000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:00f05000 ph data[4]=0:f03000 (2fff) get Phys(data[n=5+3000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:00f06000 ph data[4]=0:f03000 (3fff) get Phys(data[n=5+4000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:00f07000 ph data[4]=0:f03000 (4fff) get Phys(data[n=5+5000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:00ee0000 ph data[5]=0:ee0000 (fff) get Phys(data[n=6+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:00ee9000 ph data[6]=0:ee9000 (fff) get Phys(data[n=7+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:00ef2000 ph data[7]=0:ef2000 (fff) get Phys(data[n=8+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:00efb000 ph data[8]=0:efb000 (fff) get Phys(data[n=9+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:00efc000 ph data[8]=0:efb000 (1fff) get Phys(data[n=9+2000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:00efd000 set TERM ph data[8]=0:efb000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93d1e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09274 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93d9e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff670 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fb4300, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4300, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:02ca4000 ph data[0]=0:2ca4000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:02ca5000 set TERM ph data[0]=0:2ca4000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4300, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:38c0b000 ph data[0]=0:38c0b000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:38bbc000 ph data[1]=0:38bbc000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:38d05000 ph data[2]=0:38d05000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:3894e000 ph data[3]=0:3894e000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:38ac7000 ph data[4]=0:38ac7000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:38cf8000 ph data[5]=0:38cf8000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:38a61000 ph data[6]=0:38a61000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:38a0a000 ph data[7]=0:38a0a000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:388eb000 ph data[8]=0:388eb000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:38a44000 ph data[9]=0:38a44000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:38905000 ph data[10]=0:38905000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:38cfe000 ph data[11]=0:38cfe000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:3892f000 ph data[12]=0:3892f000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:38cf0000 ph data[13]=0:38cf0000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:38a51000 ph data[14]=0:38a51000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:38bda000 set TERM ph data[15]=0:38bda000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:38ae3000 ph data[0]=0:38ae3000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:38964000 ph data[1]=0:38964000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:38bf5000 ph data[2]=0:38bf5000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:38cf6000 ph data[3]=0:38cf6000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:38abf000 ph data[4]=0:38abf000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:38a78000 ph data[5]=0:38a78000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:38b61000 ph data[6]=0:38b61000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:38bd2000 ph data[7]=0:38bd2000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:38b0b000 ph data[8]=0:38b0b000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:3890c000 ph data[9]=0:3890c000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:389fd000 ph data[10]=0:389fd000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:38abe000 ph data[11]=0:38abe000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:38a5f000 ph data[12]=0:38a5f000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:38a68000 ph data[13]=0:38a68000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:38909000 ph data[14]=0:38909000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:388f2000 set TERM ph data[15]=0:388f2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:38aeb000 ph data[0]=0:38aeb000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:3895c000 ph data[1]=0:3895c000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:389ed000 ph data[2]=0:389ed000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:38956000 ph data[3]=0:38956000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:38bdf000 ph data[4]=0:38bdf000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:38a60000 ph data[5]=0:38a60000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:38bb9000 ph data[6]=0:38bb9000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:38c12000 ph data[7]=0:38c12000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:38adb000 ph data[8]=0:38adb000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:38a3c000 ph data[9]=0:38a3c000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:388f5000 ph data[10]=0:388f5000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:38b26000 ph data[11]=0:38b26000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:38bd7000 ph data[12]=0:38bd7000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:38a58000 ph data[13]=0:38a58000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:38bb1000 ph data[14]=0:38bb1000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:38bf2000 set TERM ph data[15]=0:38bf2000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c8e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960c9e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960c9e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:38ad3000 ph data[0]=0:38ad3000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:38af4000 ph data[1]=0:38af4000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:38b0d000 ph data[2]=0:38b0d000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:38b1e000 ph data[3]=0:38b1e000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:38bcf000 ph data[4]=0:38bcf000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:38bc8000 ph data[5]=0:38bc8000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:38ba9000 ph data[6]=0:38ba9000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38bfa000 ph data[7]=0:38bfa000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:38be3000 ph data[8]=0:38be3000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:38924000 ph data[9]=0:38924000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:38b05000 ph data[10]=0:38b05000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:38916000 ph data[11]=0:38916000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:38bc7000 ph data[12]=0:38bc7000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:38bc0000 ph data[13]=0:38bc0000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:38b39000 ph data[14]=0:38b39000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:38932000 set TERM ph data[15]=0:38932000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960c9e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ca60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ca60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:38bdb000 ph data[0]=0:38bdb000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:38a2c000 ph data[1]=0:38a2c000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:38afd000 ph data[2]=0:38afd000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:2eda6000 ph data[3]=0:2eda6000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:38a0f000 ph data[4]=0:38a0f000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:389a8000 ph data[5]=0:389a8000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:38ab9000 ph data[6]=0:38ab9000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:38a1a000 ph data[7]=0:38a1a000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:38aab000 ph data[8]=0:38aab000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:38a24000 ph data[9]=0:38a24000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:38af5000 ph data[10]=0:38af5000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:38d06000 ph data[11]=0:38d06000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:38a07000 ph data[12]=0:38a07000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:389a0000 ph data[13]=0:389a0000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:38ab1000 ph data[14]=0:38ab1000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:38a02000 set TERM ph data[15]=0:38a02000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ca60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:2e5cb000 ph data[0]=0:2e5cb000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:38a1c000 ph data[1]=0:38a1c000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:3895d000 ph data[2]=0:3895d000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:38cee000 ph data[3]=0:38cee000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:389ff000 ph data[4]=0:389ff000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:2e5b0000 ph data[5]=0:2e5b0000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:38aa1000 ph data[6]=0:38aa1000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:38bc2000 ph data[7]=0:38bc2000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:38acb000 ph data[8]=0:38acb000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:38954000 ph data[9]=0:38954000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:38a45000 ph data[10]=0:38a45000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:38ce6000 ph data[11]=0:38ce6000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:389f7000 ph data[12]=0:389f7000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:38ac8000 ph data[13]=0:38ac8000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:38a99000 ph data[14]=0:38a99000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:2905a000 set TERM ph data[15]=0:2905a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cb60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cb60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:38ac3000 ph data[0]=0:38ac3000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:3894c000 ph data[1]=0:3894c000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:38a3d000 ph data[2]=0:38a3d000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:38cde000 ph data[3]=0:38cde000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:389ef000 ph data[4]=0:389ef000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:3f6e0000 ph data[5]=0:3f6e0000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:38b11000 ph data[6]=0:38b11000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:38b22000 ph data[7]=0:38b22000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:38abb000 ph data[8]=0:38abb000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:38be4000 ph data[9]=0:38be4000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:38a35000 ph data[10]=0:38a35000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:38cd6000 ph data[11]=0:38cd6000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:38b4f000 ph data[12]=0:38b4f000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:3f6e8000 ph data[13]=0:3f6e8000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:38c69000 ph data[14]=0:38c69000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:38b1a000 set TERM ph data[15]=0:38b1a000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cbe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cbe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:38a13000 ph data[0]=0:38a13000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:38afc000 ph data[1]=0:38afc000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:38a2d000 ph data[2]=0:38a2d000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:3f906000 ph data[3]=0:3f906000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:38b57000 ph data[4]=0:38b57000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:38b78000 ph data[5]=0:38b78000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:38c61000 ph data[6]=0:38c61000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:38b12000 ph data[7]=0:38b12000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:38a0b000 ph data[8]=0:38a0b000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:38bc4000 ph data[9]=0:38bc4000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:38b45000 ph data[10]=0:38b45000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:38b2e000 ph data[11]=0:38b2e000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:38bef000 ph data[12]=0:38bef000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:38b18000 ph data[13]=0:38b18000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:38c39000 ph data[14]=0:38c39000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:38b82000 set TERM ph data[15]=0:38b82000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cb60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e94 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cbe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cc60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cc60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:38bb7000 ph data[0]=0:38bb7000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:3bd98000 ph data[1]=0:3bd98000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:3bdb1000 ph data[2]=0:3bdb1000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:38c82000 ph data[3]=0:38c82000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:38ab3000 ph data[4]=0:38ab3000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:3b384000 ph data[5]=0:3b384000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:38935000 ph data[6]=0:38935000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:3f8ae000 ph data[7]=0:3f8ae000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:38977000 ph data[8]=0:38977000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:3f788000 ph data[9]=0:3f788000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:3bda9000 ph data[10]=0:3bda9000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:38c8a000 ph data[11]=0:38c8a000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:38993000 ph data[12]=0:38993000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:3f88c000 ph data[13]=0:3f88c000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:3f92d000 ph data[14]=0:3f92d000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:3f8a6000 set TERM ph data[15]=0:3f8a6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cc60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:389e7000 ph data[0]=0:389e7000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:38ba8000 ph data[1]=0:38ba8000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:3bda1000 ph data[2]=0:3bda1000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:38aca000 ph data[3]=0:38aca000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:3898b000 ph data[4]=0:3898b000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:38b5c000 ph data[5]=0:38b5c000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:3f6dd000 ph data[6]=0:3f6dd000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:38b0e000 ph data[7]=0:38b0e000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:38baf000 ph data[8]=0:38baf000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:38bd8000 ph data[9]=0:38bd8000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:38ce9000 ph data[10]=0:38ce9000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:3f8b2000 ph data[11]=0:3f8b2000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:3f913000 ph data[12]=0:3f913000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:38b54000 ph data[13]=0:38b54000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:38b95000 ph data[14]=0:38b95000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:38b06000 set TERM ph data[15]=0:38b06000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cd60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cd60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:38ba7000 ph data[0]=0:38ba7000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:38bd0000 ph data[1]=0:38bd0000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:3f8e9000 ph data[2]=0:3f8e9000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:3f8ba000 ph data[3]=0:3f8ba000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:38c73000 ph data[4]=0:38c73000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:38a34000 ph data[5]=0:38a34000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:38b8d000 ph data[6]=0:38b8d000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:38afe000 ph data[7]=0:38afe000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:38b9f000 ph data[8]=0:38b9f000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:38d08000 ph data[9]=0:38d08000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:38c71000 ph data[10]=0:38c71000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:3f8c2000 ph data[11]=0:3f8c2000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:38c6b000 ph data[12]=0:38c6b000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:389e4000 ph data[13]=0:389e4000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:38965000 ph data[14]=0:38965000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:38b8e000 set TERM ph data[15]=0:38b8e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cde0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cde0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:388df000 ph data[0]=0:388df000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:38d00000 ph data[1]=0:38d00000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:388e9000 ph data[2]=0:388e9000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:38aea000 ph data[3]=0:38aea000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:38bd3000 ph data[4]=0:38bd3000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:389dc000 ph data[5]=0:389dc000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3899d000 ph data[6]=0:3899d000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:388f6000 ph data[7]=0:388f6000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:38ab7000 ph data[8]=0:38ab7000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:38ce0000 ph data[9]=0:38ce0000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:388e1000 ph data[10]=0:388e1000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:38ae2000 ph data[11]=0:38ae2000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:38ce3000 ph data[12]=0:38ce3000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:389d4000 ph data[13]=0:389d4000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:38995000 ph data[14]=0:38995000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:3b386000 set TERM ph data[15]=0:3b386000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f0 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cd60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cde0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960ce60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960ce60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:28424000 ph data[0]=0:28424000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:388bd000 ph data[1]=0:388bd000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:38c36000 ph data[2]=0:38c36000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:38d2f000 ph data[3]=0:38d2f000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:38b70000 ph data[4]=0:38b70000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:37809000 ph data[5]=0:37809000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:38d5a000 ph data[6]=0:38d5a000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:38cab000 ph data[7]=0:38cab000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:2842c000 ph data[8]=0:2842c000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:388c5000 ph data[9]=0:388c5000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:38c1e000 ph data[10]=0:38c1e000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:38d37000 ph data[11]=0:38d37000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:38c70000 ph data[12]=0:38c70000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:377b1000 ph data[13]=0:377b1000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:38d62000 ph data[14]=0:38d62000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:38d33000 set TERM ph data[15]=0:38d33000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960ce60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:388bc000 ph data[0]=0:388bc000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:38d4d000 ph data[1]=0:38d4d000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:2c91e000 ph data[2]=0:2c91e000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:286bf000 ph data[3]=0:286bf000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:38c78000 ph data[4]=0:38c78000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:377b9000 ph data[5]=0:377b9000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:38d6a000 ph data[6]=0:38d6a000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:38d3b000 ph data[7]=0:38d3b000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:388cc000 ph data[8]=0:388cc000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:38d55000 ph data[9]=0:38d55000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:389ee000 ph data[10]=0:389ee000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:38bbf000 ph data[11]=0:38bbf000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:38c80000 ph data[12]=0:38c80000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:377c9000 ph data[13]=0:377c9000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:38cda000 ph data[14]=0:38cda000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:2e5bb000 set TERM ph data[15]=0:2e5bb000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cf60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cf60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:38d5c000 ph data[0]=0:38d5c000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:38a9d000 ph data[1]=0:38a9d000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:2e556000 ph data[2]=0:2e556000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:2e60f000 ph data[3]=0:2e60f000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:2c8c8000 ph data[4]=0:2c8c8000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:2e5d9000 ph data[5]=0:2e5d9000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:3891a000 ph data[6]=0:3891a000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:377cb000 ph data[7]=0:377cb000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:38d64000 ph data[8]=0:38d64000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:38c1d000 ph data[9]=0:38c1d000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:38b6e000 ph data[10]=0:38b6e000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:2e587000 ph data[11]=0:2e587000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:2e600000 ph data[12]=0:2e600000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:38b69000 ph data[13]=0:38b69000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:3bdaa000 ph data[14]=0:3bdaa000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:2e63b000 set TERM ph data[15]=0:2e63b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960cfe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960cfe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:2e654000 ph data[0]=0:2e654000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:3f885000 ph data[1]=0:3f885000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:38b76000 ph data[2]=0:38b76000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:38c37000 ph data[3]=0:38c37000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:38bb0000 ph data[4]=0:38bb0000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:2e529000 ph data[5]=0:2e529000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3bdb2000 ph data[6]=0:3bdb2000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:2e633000 ph data[7]=0:2e633000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:2e64c000 ph data[8]=0:2e64c000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:2b735000 ph data[9]=0:2b735000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:38b96000 ph data[10]=0:38b96000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:38c5f000 ph data[11]=0:38c5f000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:38908000 ph data[12]=0:38908000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:2e521000 ph data[13]=0:2e521000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:2869a000 ph data[14]=0:2869a000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:38c83000 set TERM ph data[15]=0:38c83000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cf60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960cfe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:3f6ff000 ph data[0]=0:3f6ff000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:2e5e0000 ph data[1]=0:2e5e0000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:28409000 ph data[2]=0:28409000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:2b70a000 ph data[3]=0:2b70a000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:2afa3000 ph data[4]=0:2afa3000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:388e4000 ph data[5]=0:388e4000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:2e55d000 ph data[6]=0:2e55d000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:2e59e000 ph data[7]=0:2e59e000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:286a7000 ph data[8]=0:286a7000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:2e5d8000 ph data[9]=0:2e5d8000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:28411000 ph data[10]=0:28411000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:360ca000 ph data[11]=0:360ca000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:2af9b000 ph data[12]=0:2af9b000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:38cdc000 ph data[13]=0:38cdc000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:2e615000 ph data[14]=0:2e615000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:3f87e000 set TERM ph data[15]=0:3f87e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d0e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d0e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:286ff000 ph data[0]=0:286ff000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:37838000 ph data[1]=0:37838000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:6fa41000 ph data[2]=0:6fa41000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:360d2000 ph data[3]=0:360d2000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:3070b000 ph data[4]=0:3070b000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:3f8a4000 ph data[5]=0:3f8a4000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:36aad000 ph data[6]=0:36aad000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:2e60e000 ph data[7]=0:2e60e000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:28707000 ph data[8]=0:28707000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:36a80000 ph data[9]=0:36a80000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:6fa49000 ph data[10]=0:6fa49000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:36042000 ph data[11]=0:36042000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:30713000 ph data[12]=0:30713000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:287b4000 ph data[13]=0:287b4000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:36ab5000 ph data[14]=0:36ab5000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:2e5f6000 set TERM ph data[15]=0:2e5f6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d160, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d160, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:2e57f000 ph data[0]=0:2e57f000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:3f908000 ph data[1]=0:3f908000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:2afb9000 ph data[2]=0:2afb9000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:38c22000 ph data[3]=0:38c22000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:3071b000 ph data[4]=0:3071b000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:28ad4000 ph data[5]=0:28ad4000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:388dd000 ph data[6]=0:388dd000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:2e5ee000 ph data[7]=0:2e5ee000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:2e567000 ph data[8]=0:2e567000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:28718000 ph data[9]=0:28718000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:2e581000 ph data[10]=0:2e581000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:388da000 ph data[11]=0:388da000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:3f92b000 ph data[12]=0:3f92b000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:2e63c000 ph data[13]=0:2e63c000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:28405000 ph data[14]=0:28405000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:2e5e6000 set TERM ph data[15]=0:2e5e6000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d0e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d1e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d1e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:360c7000 ph data[0]=0:360c7000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:28400000 ph data[1]=0:28400000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:2e589000 ph data[2]=0:2e589000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:287ba000 ph data[3]=0:287ba000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:38c7b000 ph data[4]=0:38c7b000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:2e624000 ph data[5]=0:2e624000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2840d000 ph data[6]=0:2840d000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:2e61e000 ph data[7]=0:2e61e000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:35907000 ph data[8]=0:35907000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:28408000 ph data[9]=0:28408000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:2e591000 ph data[10]=0:2e591000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:10b92000 ph data[11]=0:10b92000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:2e5fb000 ph data[12]=0:2e5fb000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:2e58c000 ph data[13]=0:2e58c000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:2872d000 ph data[14]=0:2872d000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:36a9e000 set TERM ph data[15]=0:36a9e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d160, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d1e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d260, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d260, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:2fa5a000 ph data[0]=0:2fa5a000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:2e403000 ph data[1]=0:2e403000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:2fa0c000 ph data[2]=0:2fa0c000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:377cd000 ph data[3]=0:377cd000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:2ee8e000 ph data[4]=0:2ee8e000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:2e4cf000 ph data[5]=0:2e4cf000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:2ee78000 ph data[6]=0:2ee78000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:2e4a1000 ph data[7]=0:2e4a1000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:2fa52000 ph data[8]=0:2fa52000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:2e3fb000 ph data[9]=0:2e3fb000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:2fa04000 ph data[10]=0:2fa04000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:2fa55000 ph data[11]=0:2fa55000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:2ee86000 ph data[12]=0:2ee86000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:2e4c7000 ph data[13]=0:2e4c7000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:2ee70000 ph data[14]=0:2ee70000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:2e499000 set TERM ph data[15]=0:2e499000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d260, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d2e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d2e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:3780a000 ph data[0]=0:3780a000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:2e4e3000 ph data[1]=0:2e4e3000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:2f9fc000 ph data[2]=0:2f9fc000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:2fa0d000 ph data[3]=0:2fa0d000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:2ee7e000 ph data[4]=0:2ee7e000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:2e4bf000 ph data[5]=0:2e4bf000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:2ee68000 ph data[6]=0:2ee68000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:2e491000 ph data[7]=0:2e491000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:36a9a000 ph data[8]=0:36a9a000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:2e4db000 ph data[9]=0:2e4db000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:2f9f4000 ph data[10]=0:2f9f4000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:2fa05000 ph data[11]=0:2fa05000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:2ee76000 ph data[12]=0:2ee76000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:2e4b7000 ph data[13]=0:2e4b7000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:2ee60000 ph data[14]=0:2ee60000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:2e489000 set TERM ph data[15]=0:2e489000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d360, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d360, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:2e3fa000 ph data[0]=0:2e3fa000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:2e4d3000 ph data[1]=0:2e4d3000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:2f9e4000 ph data[2]=0:2f9e4000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:2f9fd000 ph data[3]=0:2f9fd000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:2ee6e000 ph data[4]=0:2ee6e000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:2e4af000 ph data[5]=0:2e4af000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:38d40000 ph data[6]=0:38d40000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:360c1000 ph data[7]=0:360c1000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:2e4e2000 ph data[8]=0:2e4e2000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:2e4cb000 ph data[9]=0:2e4cb000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:2ee94000 ph data[10]=0:2ee94000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:2f9f5000 ph data[11]=0:2f9f5000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:2ee66000 ph data[12]=0:2ee66000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:36a97000 ph data[13]=0:36a97000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:38d18000 ph data[14]=0:38d18000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:30729000 set TERM ph data[15]=0:30729000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d2e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d3e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d3e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:2e4da000 ph data[0]=0:2e4da000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:36a83000 ph data[1]=0:36a83000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:3780c000 ph data[2]=0:3780c000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:2f9ed000 ph data[3]=0:2f9ed000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:37806000 ph data[4]=0:37806000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:6fa17000 ph data[5]=0:6fa17000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2e588000 ph data[6]=0:2e588000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:2af99000 ph data[7]=0:2af99000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:2e4d2000 ph data[8]=0:2e4d2000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:36abb000 ph data[9]=0:36abb000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:2e4c4000 ph data[10]=0:2e4c4000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:2f9e5000 ph data[11]=0:2f9e5000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:2fa4e000 ph data[12]=0:2fa4e000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:2b757000 ph data[13]=0:2b757000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:2fa00000 ph data[14]=0:2fa00000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:286d1000 set TERM ph data[15]=0:286d1000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d360, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d3e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d460, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d460, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:6222a000 ph data[0]=0:6222a000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:60d63000 ph data[1]=0:60d63000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:6220c000 ph data[2]=0:6220c000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:62225000 ph data[3]=0:62225000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:0070e000 ph data[4]=0:70e000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:62227000 ph data[5]=0:62227000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:00590000 ph data[6]=0:590000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:60bb9000 ph data[7]=0:60bb9000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:62222000 ph data[8]=0:62222000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:60d5b000 ph data[9]=0:60d5b000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:62204000 ph data[10]=0:62204000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:6221d000 ph data[11]=0:6221d000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:00706000 ph data[12]=0:706000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:6221f000 ph data[13]=0:6221f000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:00518000 ph data[14]=0:518000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:60d99000 set TERM ph data[15]=0:60d99000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d460, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d4e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d4e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:6221a000 ph data[0]=0:6221a000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:62243000 ph data[1]=0:62243000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:621fc000 ph data[2]=0:621fc000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:62215000 ph data[3]=0:62215000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:006fe000 ph data[4]=0:6fe000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:62217000 ph data[5]=0:62217000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:00510000 ph data[6]=0:510000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:60d91000 ph data[7]=0:60d91000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:62212000 ph data[8]=0:62212000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:6223b000 ph data[9]=0:6223b000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:624f4000 ph data[10]=0:624f4000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:6220d000 ph data[11]=0:6220d000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:006f6000 ph data[12]=0:6f6000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:6220f000 ph data[13]=0:6220f000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:00490000 ph data[14]=0:490000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:60d89000 set TERM ph data[15]=0:60d89000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d560, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d560, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:6220a000 ph data[0]=0:6220a000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:62233000 ph data[1]=0:62233000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:624ec000 ph data[2]=0:624ec000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:62205000 ph data[3]=0:62205000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:00676000 ph data[4]=0:676000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:62207000 ph data[5]=0:62207000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:00398000 ph data[6]=0:398000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:60d81000 ph data[7]=0:60d81000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:62202000 ph data[8]=0:62202000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:6222b000 ph data[9]=0:6222b000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:624e4000 ph data[10]=0:624e4000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:621fd000 ph data[11]=0:621fd000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:00596000 ph data[12]=0:596000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:621ff000 ph data[13]=0:621ff000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:00390000 ph data[14]=0:390000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:60d79000 set TERM ph data[15]=0:60d79000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d4e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d5e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d5e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:624fa000 ph data[0]=0:624fa000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:62223000 ph data[1]=0:62223000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:624dc000 ph data[2]=0:624dc000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:624f5000 ph data[3]=0:624f5000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:0058e000 ph data[4]=0:58e000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:624ef000 ph data[5]=0:624ef000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:00088000 ph data[6]=0:88000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:60d71000 ph data[7]=0:60d71000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:624f2000 ph data[8]=0:624f2000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:6221b000 ph data[9]=0:6221b000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:624d4000 ph data[10]=0:624d4000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:624ed000 ph data[11]=0:624ed000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:00556000 ph data[12]=0:556000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:624e7000 ph data[13]=0:624e7000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:00328000 ph data[14]=0:328000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:60d69000 set TERM ph data[15]=0:60d69000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d560, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d5e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:01bb6000 ph data[0]=0:1bb6000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:01b17000 ph data[1]=0:1b17000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:01b70000 ph data[2]=0:1b70000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:01a51000 ph data[3]=0:1a51000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:01b62000 ph data[4]=0:1b62000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:01b4b000 ph data[5]=0:1b4b000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:01b1c000 ph data[6]=0:1b1c000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:01b0d000 ph data[7]=0:1b0d000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:01bbe000 ph data[8]=0:1bbe000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:01b1f000 ph data[9]=0:1b1f000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:01b78000 ph data[10]=0:1b78000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:01a59000 ph data[11]=0:1a59000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:01aea000 ph data[12]=0:1aea000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:01b53000 ph data[13]=0:1b53000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:01b24000 ph data[14]=0:1b24000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:01b15000 set TERM ph data[15]=0:1b15000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:01bc6000 ph data[0]=0:1bc6000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:01b27000 ph data[1]=0:1b27000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:01b80000 ph data[2]=0:1b80000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:01a61000 ph data[3]=0:1a61000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:01af2000 ph data[4]=0:1af2000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:01b5b000 ph data[5]=0:1b5b000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:01bec000 ph data[6]=0:1bec000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:01b1d000 ph data[7]=0:1b1d000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:01bce000 ph data[8]=0:1bce000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:01b2f000 ph data[9]=0:1b2f000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:01b88000 ph data[10]=0:1b88000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:01b29000 ph data[11]=0:1b29000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:01afa000 ph data[12]=0:1afa000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:01b63000 ph data[13]=0:1b63000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:01bf4000 ph data[14]=0:1bf4000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:01b25000 set TERM ph data[15]=0:1b25000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:01bd6000 ph data[0]=0:1bd6000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:01bf7000 ph data[1]=0:1bf7000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:01b90000 ph data[2]=0:1b90000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:01b31000 ph data[3]=0:1b31000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:01b02000 ph data[4]=0:1b02000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:01aeb000 ph data[5]=0:1aeb000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:01bfc000 ph data[6]=0:1bfc000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:01bed000 ph data[7]=0:1bed000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:01bde000 ph data[8]=0:1bde000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:01bff000 ph data[9]=0:1bff000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:01c58000 ph data[10]=0:1c58000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:01b39000 ph data[11]=0:1b39000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:01b0a000 ph data[12]=0:1b0a000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:01af3000 ph data[13]=0:1af3000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:01c04000 ph data[14]=0:1c04000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:01bf5000 set TERM ph data[15]=0:1bf5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d6e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d7e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d7e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:01be6000 ph data[0]=0:1be6000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:01c07000 ph data[1]=0:1c07000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:01c60000 ph data[2]=0:1c60000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:01b41000 ph data[3]=0:1b41000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:01b12000 ph data[4]=0:1b12000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:01afb000 ph data[5]=0:1afb000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:01c0c000 ph data[6]=0:1c0c000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:01bfd000 ph data[7]=0:1bfd000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:01bee000 ph data[8]=0:1bee000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:01c0f000 ph data[9]=0:1c0f000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:01c68000 ph data[10]=0:1c68000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:01b49000 ph data[11]=0:1b49000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:01b1a000 ph data[12]=0:1b1a000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:01b03000 ph data[13]=0:1b03000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:01c14000 ph data[14]=0:1c14000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:01c05000 set TERM ph data[15]=0:1c05000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d7e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:00625000 ph data[0]=0:625000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:0045e000 ph data[1]=0:45e000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:005c7000 ph data[2]=0:5c7000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:003f0000 ph data[3]=0:3f0000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:02e51000 ph data[4]=0:2e51000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:00682000 ph data[5]=0:682000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:006b3000 ph data[6]=0:6b3000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:0061c000 ph data[7]=0:61c000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:0061d000 ph data[7]=0:61c000 (1fff) get Phys(data[n=8+2000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:0043e000 ph data[8]=0:43e000 (fff) get Phys(data[n=9+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:005a7000 ph data[9]=0:5a7000 (fff) get Phys(data[n=10+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:afec0000 ph data[10]=0:afec0000 (fff) get Phys(data[n=11+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:006c1000 ph data[11]=0:6c1000 (fff) get Phys(data[n=12+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:00662000 ph data[12]=0:662000 (fff) get Phys(data[n=13+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:006ab000 ph data[13]=0:6ab000 (fff) get Phys(data[n=14+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:005f4000 set TERM ph data[14]=0:5f4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:005f5000 ph data[0]=0:5f5000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:00436000 ph data[1]=0:436000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:0057f000 ph data[2]=0:57f000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:afec8000 ph data[3]=0:afec8000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:006b9000 ph data[4]=0:6b9000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:0065a000 ph data[5]=0:65a000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:00683000 ph data[6]=0:683000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:005dc000 ph data[7]=0:5dc000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:005ed000 ph data[8]=0:5ed000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:0042e000 ph data[9]=0:42e000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:0056f000 ph data[10]=0:56f000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:afed0000 ph data[11]=0:afed0000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:006b1000 ph data[12]=0:6b1000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:00652000 ph data[13]=0:652000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:00663000 ph data[14]=0:663000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:005c4000 set TERM ph data[15]=0:5c4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:005dd000 ph data[0]=0:5dd000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:00426000 ph data[1]=0:426000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:00567000 ph data[2]=0:567000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:afed8000 ph data[3]=0:afed8000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:006a9000 ph data[4]=0:6a9000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:0062a000 ph data[5]=0:62a000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:0065b000 ph data[6]=0:65b000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:005a4000 ph data[7]=0:5a4000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:005c5000 ph data[8]=0:5c5000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:0041e000 ph data[9]=0:41e000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:00547000 ph data[10]=0:547000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:afee0000 ph data[11]=0:afee0000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:00681000 ph data[12]=0:681000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:00622000 ph data[13]=0:622000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:00653000 ph data[14]=0:653000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:0057c000 set TERM ph data[15]=0:57c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d8e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960d9e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960d9e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:005a5000 ph data[0]=0:5a5000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:00416000 ph data[1]=0:416000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:0053f000 ph data[2]=0:53f000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:afee8000 ph data[3]=0:afee8000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:00661000 ph data[4]=0:661000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:0061a000 ph data[5]=0:61a000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:0062b000 ph data[6]=0:62b000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:0056c000 ph data[7]=0:56c000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:0057d000 ph data[8]=0:57d000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:0040e000 ph data[9]=0:40e000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:00537000 ph data[10]=0:537000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:afdc0000 ph data[11]=0:afdc0000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:00659000 ph data[12]=0:659000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:005f2000 ph data[13]=0:5f2000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:00623000 ph data[14]=0:623000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:00544000 set TERM ph data[15]=0:544000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960d9e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960da60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960da60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:0b8e6000 ph data[0]=0:b8e6000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:0b87f000 ph data[1]=0:b87f000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:0b940000 ph data[2]=0:b940000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:afc69000 ph data[3]=0:afc69000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:afc92000 ph data[4]=0:afc92000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:afc83000 ph data[5]=0:afc83000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:0b884000 ph data[6]=0:b884000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:afd65000 ph data[7]=0:afd65000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:0b8ee000 ph data[8]=0:b8ee000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:0b887000 ph data[9]=0:b887000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:0b948000 ph data[10]=0:b948000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:afc71000 ph data[11]=0:afc71000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:afc9a000 ph data[12]=0:afc9a000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:afc8b000 ph data[13]=0:afc8b000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:0b88c000 ph data[14]=0:b88c000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:afd6d000 set TERM ph data[15]=0:afd6d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960da60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960dae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:0b8f6000 ph data[0]=0:b8f6000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:0b88f000 ph data[1]=0:b88f000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:0b950000 ph data[2]=0:b950000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:afc79000 ph data[3]=0:afc79000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:afd62000 ph data[4]=0:afd62000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:afc93000 ph data[5]=0:afc93000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:0b894000 ph data[6]=0:b894000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:0b87d000 ph data[7]=0:b87d000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:0b8fe000 ph data[8]=0:b8fe000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:0b897000 ph data[9]=0:b897000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:0b958000 ph data[10]=0:b958000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:afc81000 ph data[11]=0:afc81000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:afd6a000 ph data[12]=0:afd6a000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:afc9b000 ph data[13]=0:afc9b000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:0b89c000 ph data[14]=0:b89c000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:0b885000 set TERM ph data[15]=0:b885000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960db60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960db60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:0b906000 ph data[0]=0:b906000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:0b89f000 ph data[1]=0:b89f000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:0b960000 ph data[2]=0:b960000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:afc89000 ph data[3]=0:afc89000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:0b87a000 ph data[4]=0:b87a000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:afd6b000 ph data[5]=0:afd6b000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:0b8a4000 ph data[6]=0:b8a4000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:0b88d000 ph data[7]=0:b88d000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:0b90e000 ph data[8]=0:b90e000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:0b8a7000 ph data[9]=0:b8a7000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:0b968000 ph data[10]=0:b968000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:afc91000 ph data[11]=0:afc91000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:0b882000 ph data[12]=0:b882000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:0b87b000 ph data[13]=0:b87b000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:0b8ac000 ph data[14]=0:b8ac000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:0b895000 set TERM ph data[15]=0:b895000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960dbe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dbe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:0b916000 ph data[0]=0:b916000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:0b8af000 ph data[1]=0:b8af000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:0b970000 ph data[2]=0:b970000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:afc99000 ph data[3]=0:afc99000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:0b88a000 ph data[4]=0:b88a000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:0b883000 ph data[5]=0:b883000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:0b8b4000 ph data[6]=0:b8b4000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:0b89d000 ph data[7]=0:b89d000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:0b91e000 ph data[8]=0:b91e000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:0b8b7000 ph data[9]=0:b8b7000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:0b978000 ph data[10]=0:b978000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:afd61000 ph data[11]=0:afd61000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:0b892000 ph data[12]=0:b892000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:0b88b000 ph data[13]=0:b88b000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:0b8bc000 ph data[14]=0:b8bc000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:0b8a5000 set TERM ph data[15]=0:b8a5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960db60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c0923c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dbe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960dc60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dc60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:0c178000 ph data[0]=0:c178000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:0c069000 ph data[1]=0:c069000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:0c0a2000 ph data[2]=0:c0a2000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:0c08b000 ph data[3]=0:c08b000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:0c0b4000 ph data[4]=0:c0b4000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:0c095000 ph data[5]=0:c095000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:0c126000 ph data[6]=0:c126000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:0c0b7000 ph data[7]=0:c0b7000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:0c180000 ph data[8]=0:c180000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:0c071000 ph data[9]=0:c071000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:0c0aa000 ph data[10]=0:c0aa000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:0c093000 ph data[11]=0:c093000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:0c0bc000 ph data[12]=0:c0bc000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:0c09d000 ph data[13]=0:c09d000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:0c12e000 ph data[14]=0:c12e000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:0c0bf000 set TERM ph data[15]=0:c0bf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dc60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960dce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:0c188000 ph data[0]=0:c188000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:0c079000 ph data[1]=0:c079000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:0c0b2000 ph data[2]=0:c0b2000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:0c09b000 ph data[3]=0:c09b000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:0c0c4000 ph data[4]=0:c0c4000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:0c0a5000 ph data[5]=0:c0a5000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:0c136000 ph data[6]=0:c136000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:0c0c7000 ph data[7]=0:c0c7000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:0c190000 ph data[8]=0:c190000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:0c081000 ph data[9]=0:c081000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:0c0ba000 ph data[10]=0:c0ba000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:0c0a3000 ph data[11]=0:c0a3000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:0c0cc000 ph data[12]=0:c0cc000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:0c0ad000 ph data[13]=0:c0ad000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:0c13e000 ph data[14]=0:c13e000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:0c0cf000 set TERM ph data[15]=0:c0cf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960dd60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dd60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:0c198000 ph data[0]=0:c198000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:0c089000 ph data[1]=0:c089000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:0c0c2000 ph data[2]=0:c0c2000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:0c0ab000 ph data[3]=0:c0ab000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:0c0d4000 ph data[4]=0:c0d4000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:0c0b5000 ph data[5]=0:c0b5000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:0c146000 ph data[6]=0:c146000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:0c0d7000 ph data[7]=0:c0d7000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:0c1a0000 ph data[8]=0:c1a0000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:0c091000 ph data[9]=0:c091000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:0c0ca000 ph data[10]=0:c0ca000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:0c0b3000 ph data[11]=0:c0b3000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:0c0dc000 ph data[12]=0:c0dc000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:0c0bd000 ph data[13]=0:c0bd000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:0c14e000 ph data[14]=0:c14e000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:0c0df000 set TERM ph data[15]=0:c0df000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960dde0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dde0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:0c1a8000 ph data[0]=0:c1a8000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:0c099000 ph data[1]=0:c099000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:0c0d2000 ph data[2]=0:c0d2000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:0c0bb000 ph data[3]=0:c0bb000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:0c0e4000 ph data[4]=0:c0e4000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:0c0c5000 ph data[5]=0:c0c5000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:0c156000 ph data[6]=0:c156000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:0c0e7000 ph data[7]=0:c0e7000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:0c1b0000 ph data[8]=0:c1b0000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:0c0a1000 ph data[9]=0:c0a1000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:0c0da000 ph data[10]=0:c0da000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:0c0c3000 ph data[11]=0:c0c3000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:0c0ec000 ph data[12]=0:c0ec000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:0c0cd000 ph data[13]=0:c0cd000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:0c15e000 ph data[14]=0:c15e000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:0c0ef000 set TERM ph data[15]=0:c0ef000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dd60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08f48 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dde0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960de60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960de60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:0c0f5000 ph data[0]=0:c0f5000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:0c17e000 ph data[1]=0:c17e000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:0c11f000 ph data[2]=0:c11f000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:3fef8000 ph data[3]=0:3fef8000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:3f7c9000 ph data[4]=0:3f7c9000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:38d2a000 ph data[5]=0:38d2a000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:0c0f3000 ph data[6]=0:c0f3000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:0c11c000 ph data[7]=0:c11c000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:0c0fd000 ph data[8]=0:c0fd000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:0c186000 ph data[9]=0:c186000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:60cbf000 ph data[10]=0:60cbf000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:66298000 ph data[11]=0:66298000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:3fe31000 ph data[12]=0:3fe31000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:3feca000 ph data[13]=0:3feca000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:3fedb000 ph data[14]=0:3fedb000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:60cc4000 set TERM ph data[15]=0:60cc4000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960de60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960dee0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dee0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:3fecd000 ph data[0]=0:3fecd000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:67756000 ph data[1]=0:67756000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:60cc7000 ph data[2]=0:60cc7000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:662a0000 ph data[3]=0:662a0000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:3fe39000 ph data[4]=0:3fe39000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:3fed2000 ph data[5]=0:3fed2000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:3fee3000 ph data[6]=0:3fee3000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:401ec000 ph data[7]=0:401ec000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:3fed5000 ph data[8]=0:3fed5000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:6775e000 ph data[9]=0:6775e000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:401df000 ph data[10]=0:401df000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:662a8000 ph data[11]=0:662a8000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:3fe41000 ph data[12]=0:3fe41000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:3feda000 ph data[13]=0:3feda000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:3feeb000 ph data[14]=0:3feeb000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:3fecc000 set TERM ph data[15]=0:3fecc000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960df60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960df60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:3fedd000 ph data[0]=0:3fedd000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:67766000 ph data[1]=0:67766000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:3fec7000 ph data[2]=0:3fec7000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:662b0000 ph data[3]=0:662b0000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:3fe49000 ph data[4]=0:3fe49000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:3fee2000 ph data[5]=0:3fee2000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:3fef3000 ph data[6]=0:3fef3000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:65f94000 ph data[7]=0:65f94000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:65f9d000 ph data[8]=0:65f9d000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:645de000 ph data[9]=0:645de000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:3fecf000 ph data[10]=0:3fecf000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:662b8000 ph data[11]=0:662b8000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:3fe51000 ph data[12]=0:3fe51000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:3feea000 ph data[13]=0:3feea000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:6629b000 ph data[14]=0:6629b000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:65f9c000 set TERM ph data[15]=0:65f9c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff4f4 ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dee0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x10, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960dfe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960dfe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:65f95000 ph data[0]=0:65f95000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:645d6000 ph data[1]=0:645d6000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:3fed7000 ph data[2]=0:3fed7000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:662c0000 ph data[3]=0:662c0000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:67759000 ph data[4]=0:67759000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:3fef2000 ph data[5]=0:3fef2000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:662a3000 ph data[6]=0:662a3000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:65f8c000 ph data[7]=0:65f8c000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:65f8d000 ph data[7]=0:65f8c000 (1fff) get Phys(data[n=8+2000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:645ce000 ph data[8]=0:645ce000 (fff) get Phys(data[n=9+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:38d1f000 ph data[9]=0:38d1f000 (fff) get Phys(data[n=10+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:2e610000 ph data[10]=0:2e610000 (fff) get Phys(data[n=11+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:37811000 ph data[11]=0:37811000 (fff) get Phys(data[n=12+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:2c96a000 ph data[12]=0:2c96a000 (fff) get Phys(data[n=13+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:2e51b000 ph data[13]=0:2e51b000 (fff) get Phys(data[n=14+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:2e42c000 set TERM ph data[14]=0:2e42c000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960df60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x10, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960dfe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0xf, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff620 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960e060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960e060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:15db5000 ph data[0]=0:15db5000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:10a6e000 ph data[1]=0:10a6e000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:2e627000 ph data[2]=0:2e627000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:2c960000 ph data[3]=0:2c960000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:15e89000 ph data[4]=0:15e89000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:15d7a000 ph data[5]=0:15d7a000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:3f6d3000 ph data[6]=0:3f6d3000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:15e74000 ph data[7]=0:15e74000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:35905000 ph data[8]=0:35905000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:15dfe000 ph data[9]=0:15dfe000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:12847000 ph data[10]=0:12847000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:15e38000 ph data[11]=0:15e38000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:15e81000 ph data[12]=0:15e81000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:38d22000 ph data[13]=0:38d22000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:1286b000 ph data[14]=0:1286b000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:13074000 set TERM ph data[15]=0:13074000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960e060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for nexTopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38faca30, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38faca30, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b5e000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:12fed000 ph data[0]=0:12fed000 (fff) get Phys(data[n=1+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:12fee000 ph data[0]=0:12fed000 (1fff) get Phys(data[n=1+2000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:12fef000 ph data[0]=0:12fed000 (2fff) get Phys(data[n=1+3000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:12ff0000 ph data[0]=0:12fed000 (3fff) get Phys(data[n=1+4000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:12ff1000 ph data[0]=0:12fed000 (4fff) get Phys(data[n=1+5000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:12ff2000 ph data[0]=0:12fed000 (5fff) get Phys(data[n=1+6000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:12ff3000 ph data[0]=0:12fed000 (6fff) get Phys(data[n=1+7000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:12ff4000 ph data[0]=0:12fed000 (7fff) get Phys(data[n=1+8000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:12ff5000 ph data[0]=0:12fed000 (8fff) get Phys(data[n=1+9000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:12ff6000 ph data[0]=0:12fed000 (9fff) get Phys(data[n=1+a000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:12ff7000 ph data[0]=0:12fed000 (afff) get Phys(data[n=1+b000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:12ff8000 ph data[0]=0:12fed000 (bfff) get Phys(data[n=1+c000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:12ff9000 ph data[0]=0:12fed000 (cfff) get Phys(data[n=1+d000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:12ffa000 ph data[0]=0:12fed000 (dfff) get Phys(data[n=1+e000]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:12ffb000 ph data[0]=0:12fed000 (efff) get Phys(data[n=1+f000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:12ffc000 set TERM ph data[0]=0:12fed000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca30, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38facab0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38facab0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b6e000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:12ffd000 ph data[0]=0:12ffd000 (fff) get Phys(data[n=1+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:12ffe000 ph data[0]=0:12ffd000 (1fff) get Phys(data[n=1+2000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:12fff000 ph data[0]=0:12ffd000 (2fff) get Phys(data[n=1+3000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:13000000 ph data[0]=0:12ffd000 (3fff) get Phys(data[n=1+4000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:13001000 ph data[0]=0:12ffd000 (4fff) get Phys(data[n=1+5000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:13002000 ph data[0]=0:12ffd000 (5fff) get Phys(data[n=1+6000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:13003000 ph data[0]=0:12ffd000 (6fff) get Phys(data[n=1+7000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:13004000 ph data[0]=0:12ffd000 (7fff) get Phys(data[n=1+8000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:13005000 ph data[0]=0:12ffd000 (8fff) get Phys(data[n=1+9000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:13006000 ph data[0]=0:12ffd000 (9fff) get Phys(data[n=1+a000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:13007000 ph data[0]=0:12ffd000 (afff) get Phys(data[n=1+b000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:13008000 ph data[0]=0:12ffd000 (bfff) get Phys(data[n=1+c000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:13009000 ph data[0]=0:12ffd000 (cfff) get Phys(data[n=1+d000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:1300a000 ph data[0]=0:12ffd000 (dfff) get Phys(data[n=1+e000]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:1300b000 ph data[0]=0:12ffd000 (efff) get Phys(data[n=1+f000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:1300c000 set TERM ph data[0]=0:12ffd000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38facb30, OrigWordsRequested 0x5000, DevSize 0x50 IdeReadWrite (REQ): Starting sector is 38facb30, Number of WORDS 0x5000, DevSize 0x50 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7e000, count a000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:1300d000 ph data[0]=0:1300d000 (fff) get Phys(data[n=1+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:1300e000 ph data[0]=0:1300d000 (1fff) get Phys(data[n=1+2000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:1300f000 ph data[0]=0:1300d000 (2fff) get Phys(data[n=1+3000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:13010000 ph data[0]=0:1300d000 (3fff) get Phys(data[n=1+4000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:13011000 ph data[0]=0:1300d000 (4fff) get Phys(data[n=1+5000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:13012000 ph data[0]=0:1300d000 (5fff) get Phys(data[n=1+6000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:13013000 ph data[0]=0:1300d000 (6fff) get Phys(data[n=1+7000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:13014000 ph data[0]=0:1300d000 (7fff) get Phys(data[n=1+8000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:13015000 ph data[0]=0:1300d000 (8fff) get Phys(data[n=1+9000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:13016000 set TERM ph data[0]=0:1300d000 (9fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff020 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38facab0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff1a4 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39719d40, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 39719d40, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b88000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:13017000 ph data[0]=0:13017000 (fff) get Phys(data[n=1+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:13018000 ph data[0]=0:13017000 (1fff) get Phys(data[n=1+2000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:13019000 ph data[0]=0:13017000 (2fff) get Phys(data[n=1+3000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:1301a000 set TERM ph data[0]=0:13017000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38facb30, Count 0x50(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 5000, WordsLeft 5000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a000, full size a000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39719d40, Count 0x20(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 WARNING: HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fac4a0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fac4a0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b64000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:137f0000 ph data[0]=0:137f0000 (fff) get Phys(data[n=1+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:137f1000 ph data[0]=0:137f0000 (1fff) get Phys(data[n=1+2000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:137f2000 ph data[0]=0:137f0000 (2fff) get Phys(data[n=1+3000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:137f3000 ph data[0]=0:137f0000 (3fff) get Phys(data[n=1+4000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:137fc000 ph data[1]=0:137fc000 (fff) get Phys(data[n=2+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:137f5000 ph data[2]=0:137f5000 (fff) get Phys(data[n=3+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:137ee000 ph data[3]=0:137ee000 (fff) get Phys(data[n=4+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:137ef000 ph data[3]=0:137ee000 (1fff) get Phys(data[n=4+2000]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:137f8000 ph data[4]=0:137f8000 (fff) get Phys(data[n=5+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:137f9000 ph data[4]=0:137f8000 (1fff) get Phys(data[n=5+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:137fa000 ph data[4]=0:137f8000 (2fff) get Phys(data[n=5+3000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:137fb000 ph data[4]=0:137f8000 (3fff) get Phys(data[n=5+4000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:13804000 ph data[5]=0:13804000 (fff) get Phys(data[n=6+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:137fd000 ph data[6]=0:137fd000 (fff) get Phys(data[n=7+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:137f6000 ph data[7]=0:137f6000 (fff) get Phys(data[n=8+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:137f7000 set TERM ph data[7]=0:137f6000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac4a0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x8, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fac520, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fac520, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b74000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:13800000 ph data[0]=0:13800000 (fff) get Phys(data[n=1+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:13801000 ph data[0]=0:13800000 (1fff) get Phys(data[n=1+2000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:13802000 ph data[0]=0:13800000 (2fff) get Phys(data[n=1+3000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:13803000 ph data[0]=0:13800000 (3fff) get Phys(data[n=1+4000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:1380c000 ph data[1]=0:1380c000 (fff) get Phys(data[n=2+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:13805000 ph data[2]=0:13805000 (fff) get Phys(data[n=3+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:137fe000 ph data[3]=0:137fe000 (fff) get Phys(data[n=4+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:137ff000 ph data[3]=0:137fe000 (1fff) get Phys(data[n=4+2000]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:13808000 ph data[4]=0:13808000 (fff) get Phys(data[n=5+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:13809000 ph data[4]=0:13808000 (1fff) get Phys(data[n=5+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:1380a000 ph data[4]=0:13808000 (2fff) get Phys(data[n=5+3000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:1380b000 ph data[4]=0:13808000 (3fff) get Phys(data[n=5+4000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:13814000 ph data[5]=0:13814000 (fff) get Phys(data[n=6+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:1380d000 ph data[6]=0:1380d000 (fff) get Phys(data[n=7+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:13806000 ph data[7]=0:13806000 (fff) get Phys(data[n=8+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:13807000 set TERM ph data[7]=0:13806000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fac5a0, OrigWordsRequested 0x4000, DevSize 0x40 IdeReadWrite (REQ): Starting sector is 38fac5a0, Number of WORDS 0x4000, DevSize 0x40 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b84000, count 8000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:13810000 ph data[0]=0:13810000 (fff) get Phys(data[n=1+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:13811000 ph data[0]=0:13810000 (1fff) get Phys(data[n=1+2000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:13812000 ph data[0]=0:13810000 (2fff) get Phys(data[n=1+3000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:13813000 ph data[0]=0:13810000 (3fff) get Phys(data[n=1+4000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:1381c000 ph data[1]=0:1381c000 (fff) get Phys(data[n=2+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:13815000 ph data[2]=0:13815000 (fff) get Phys(data[n=3+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:1380e000 ph data[3]=0:1380e000 (fff) get Phys(data[n=4+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:1380f000 set TERM ph data[3]=0:1380e000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff028 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac520, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac5a0, Count 0x40(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 4000, WordsLeft 4000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8000, full size 8000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff08c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38fac490, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac490, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:290c6000 ph data[0]=0:290c6000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:2b74f000 set TERM ph data[1]=0:2b74f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac490, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x5, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fac4a0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fac4a0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b64000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:137f0000 ph data[0]=0:137f0000 (fff) get Phys(data[n=1+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:137f1000 ph data[0]=0:137f0000 (1fff) get Phys(data[n=1+2000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:137f2000 ph data[0]=0:137f0000 (2fff) get Phys(data[n=1+3000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:137f3000 ph data[0]=0:137f0000 (3fff) get Phys(data[n=1+4000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:137fc000 ph data[1]=0:137fc000 (fff) get Phys(data[n=2+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:137f5000 ph data[2]=0:137f5000 (fff) get Phys(data[n=3+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:137ee000 ph data[3]=0:137ee000 (fff) get Phys(data[n=4+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:137ef000 ph data[3]=0:137ee000 (1fff) get Phys(data[n=4+2000]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:137f8000 ph data[4]=0:137f8000 (fff) get Phys(data[n=5+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:137f9000 ph data[4]=0:137f8000 (1fff) get Phys(data[n=5+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:137fa000 ph data[4]=0:137f8000 (2fff) get Phys(data[n=5+3000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:137fb000 ph data[4]=0:137f8000 (3fff) get Phys(data[n=5+4000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:13804000 ph data[5]=0:13804000 (fff) get Phys(data[n=6+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:137fd000 ph data[6]=0:137fd000 (fff) get Phys(data[n=7+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:137f6000 ph data[7]=0:137f6000 (fff) get Phys(data[n=8+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:137f7000 set TERM ph data[7]=0:137f6000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac4a0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x8, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fac520, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38fac520, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b74000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:13800000 ph data[0]=0:13800000 (fff) get Phys(data[n=1+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:13801000 ph data[0]=0:13800000 (1fff) get Phys(data[n=1+2000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:13802000 ph data[0]=0:13800000 (2fff) get Phys(data[n=1+3000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:13803000 ph data[0]=0:13800000 (3fff) get Phys(data[n=1+4000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:1380c000 ph data[1]=0:1380c000 (fff) get Phys(data[n=2+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:13805000 ph data[2]=0:13805000 (fff) get Phys(data[n=3+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:137fe000 ph data[3]=0:137fe000 (fff) get Phys(data[n=4+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:137ff000 ph data[3]=0:137fe000 (1fff) get Phys(data[n=4+2000]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:13808000 ph data[4]=0:13808000 (fff) get Phys(data[n=5+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:13809000 ph data[4]=0:13808000 (1fff) get Phys(data[n=5+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:1380a000 ph data[4]=0:13808000 (2fff) get Phys(data[n=5+3000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:1380b000 ph data[4]=0:13808000 (3fff) get Phys(data[n=5+4000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:13814000 ph data[5]=0:13814000 (fff) get Phys(data[n=6+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:1380d000 ph data[6]=0:1380d000 (fff) get Phys(data[n=7+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:13806000 ph data[7]=0:13806000 (fff) get Phys(data[n=8+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:13807000 set TERM ph data[7]=0:13806000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fac5a0, OrigWordsRequested 0x4000, DevSize 0x40 IdeReadWrite (REQ): Starting sector is 38fac5a0, Number of WORDS 0x4000, DevSize 0x40 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b84000, count 8000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:13810000 ph data[0]=0:13810000 (fff) get Phys(data[n=1+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:13811000 ph data[0]=0:13810000 (1fff) get Phys(data[n=1+2000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:13812000 ph data[0]=0:13810000 (2fff) get Phys(data[n=1+3000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:13813000 ph data[0]=0:13810000 (3fff) get Phys(data[n=1+4000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:1381c000 ph data[1]=0:1381c000 (fff) get Phys(data[n=2+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:13815000 ph data[2]=0:13815000 (fff) get Phys(data[n=3+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:1380e000 ph data[3]=0:1380e000 (fff) get Phys(data[n=4+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:1380f000 set TERM ph data[3]=0:1380e000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff008 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac520, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x8, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac5a0, Count 0x40(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 4000, WordsLeft 4000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8000, full size 8000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 WARNING: HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960fc60, OrigWordsRequested 0x4200, DevSize 0x42 IdeReadWrite (REQ): Starting sector is 3960fc60, Number of WORDS 0x4200, DevSize 0x42 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c1c000, count 8400, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:2886e000 ph data[0]=0:2886e000 (fff) get Phys(data[n=1+1000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:269c7000 ph data[1]=0:269c7000 (fff) get Phys(data[n=2+1000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:29118000 ph data[2]=0:29118000 (fff) get Phys(data[n=3+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:284e1000 ph data[3]=0:284e1000 (fff) get Phys(data[n=4+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:29122000 ph data[4]=0:29122000 (fff) get Phys(data[n=5+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:290b3000 ph data[5]=0:290b3000 (fff) get Phys(data[n=6+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:1dcdc000 ph data[6]=0:1dcdc000 (fff) get Phys(data[n=7+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:024f5000 ph data[7]=0:24f5000 (fff) get Phys(data[n=8+1000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:29136000 set TERM ph data[8]=0:29136000 (3ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fc60, Count 0x42(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x9, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:6af90000 ph data[0]=0:6af90000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:6af91000 ph data[0]=0:6af90000 (1fff) get Phys(data[n=1+2000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:6af8a000 ph data[1]=0:6af8a000 (fff) get Phys(data[n=2+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:6af8b000 ph data[1]=0:6af8a000 (1fff) get Phys(data[n=2+2000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:6af8c000 ph data[1]=0:6af8a000 (2fff) get Phys(data[n=2+3000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:6af8d000 ph data[1]=0:6af8a000 (3fff) get Phys(data[n=2+4000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:6af8e000 ph data[1]=0:6af8a000 (4fff) get Phys(data[n=2+5000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:6af8f000 ph data[1]=0:6af8a000 (5fff) get Phys(data[n=2+6000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:6af98000 ph data[2]=0:6af98000 (fff) get Phys(data[n=3+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:6af99000 ph data[2]=0:6af98000 (1fff) get Phys(data[n=3+2000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:6af92000 ph data[3]=0:6af92000 (fff) get Phys(data[n=4+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:6af93000 ph data[3]=0:6af92000 (1fff) get Phys(data[n=4+2000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:6af94000 ph data[3]=0:6af92000 (2fff) get Phys(data[n=4+3000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:6af95000 ph data[3]=0:6af92000 (3fff) get Phys(data[n=4+4000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:6af96000 ph data[3]=0:6af92000 (4fff) get Phys(data[n=4+5000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:6af97000 set TERM ph data[3]=0:6af92000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 4200, WordsLeft 4200 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8400, full size 8400 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002290, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002310, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002310, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:6afa0000 ph data[0]=0:6afa0000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:6afa1000 ph data[0]=0:6afa0000 (1fff) get Phys(data[n=1+2000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:6af9a000 ph data[1]=0:6af9a000 (fff) get Phys(data[n=2+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:6af9b000 ph data[1]=0:6af9a000 (1fff) get Phys(data[n=2+2000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:6af9c000 ph data[1]=0:6af9a000 (2fff) get Phys(data[n=2+3000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:6af9d000 ph data[1]=0:6af9a000 (3fff) get Phys(data[n=2+4000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:6af9e000 ph data[1]=0:6af9a000 (4fff) get Phys(data[n=2+5000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:6af9f000 ph data[1]=0:6af9a000 (5fff) get Phys(data[n=2+6000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:6afa8000 ph data[2]=0:6afa8000 (fff) get Phys(data[n=3+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:6afa9000 ph data[2]=0:6afa8000 (1fff) get Phys(data[n=3+2000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:6afa2000 ph data[3]=0:6afa2000 (fff) get Phys(data[n=4+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:6afa3000 ph data[3]=0:6afa2000 (1fff) get Phys(data[n=4+2000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:6afa4000 ph data[3]=0:6afa2000 (2fff) get Phys(data[n=4+3000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:6afa5000 ph data[3]=0:6afa2000 (3fff) get Phys(data[n=4+4000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:6afa6000 ph data[3]=0:6afa2000 (4fff) get Phys(data[n=4+5000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:6afa7000 set TERM ph data[3]=0:6afa2000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002310, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002390, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002390, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:6afb0000 ph data[0]=0:6afb0000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:6afb1000 ph data[0]=0:6afb0000 (1fff) get Phys(data[n=1+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:6afaa000 ph data[1]=0:6afaa000 (fff) get Phys(data[n=2+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:6afab000 ph data[1]=0:6afaa000 (1fff) get Phys(data[n=2+2000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:6afac000 ph data[1]=0:6afaa000 (2fff) get Phys(data[n=2+3000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:6afad000 ph data[1]=0:6afaa000 (3fff) get Phys(data[n=2+4000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:6afae000 ph data[1]=0:6afaa000 (4fff) get Phys(data[n=2+5000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:6afaf000 ph data[1]=0:6afaa000 (5fff) get Phys(data[n=2+6000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:6afb8000 ph data[2]=0:6afb8000 (fff) get Phys(data[n=3+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:6afb9000 ph data[2]=0:6afb8000 (1fff) get Phys(data[n=3+2000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:6afb2000 ph data[3]=0:6afb2000 (fff) get Phys(data[n=4+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:6afb3000 ph data[3]=0:6afb2000 (1fff) get Phys(data[n=4+2000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:6afb4000 ph data[3]=0:6afb2000 (2fff) get Phys(data[n=4+3000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:6afb5000 ph data[3]=0:6afb2000 (3fff) get Phys(data[n=4+4000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:6afb6000 ph data[3]=0:6afb2000 (4fff) get Phys(data[n=4+5000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:6afb7000 set TERM ph data[3]=0:6afb2000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002410, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002410, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:6afc0000 ph data[0]=0:6afc0000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:6afc1000 ph data[0]=0:6afc0000 (1fff) get Phys(data[n=1+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:6afba000 ph data[1]=0:6afba000 (fff) get Phys(data[n=2+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:6afbb000 ph data[1]=0:6afba000 (1fff) get Phys(data[n=2+2000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:6afbc000 ph data[1]=0:6afba000 (2fff) get Phys(data[n=2+3000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:6afbd000 ph data[1]=0:6afba000 (3fff) get Phys(data[n=2+4000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:6afbe000 ph data[1]=0:6afba000 (4fff) get Phys(data[n=2+5000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:6afbf000 ph data[1]=0:6afba000 (5fff) get Phys(data[n=2+6000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:6afc8000 ph data[2]=0:6afc8000 (fff) get Phys(data[n=3+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:6afc9000 ph data[2]=0:6afc8000 (1fff) get Phys(data[n=3+2000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:6afc2000 ph data[3]=0:6afc2000 (fff) get Phys(data[n=4+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:6afc3000 ph data[3]=0:6afc2000 (1fff) get Phys(data[n=4+2000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:6afc4000 ph data[3]=0:6afc2000 (2fff) get Phys(data[n=4+3000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:6afc5000 ph data[3]=0:6afc2000 (3fff) get Phys(data[n=4+4000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:6afc6000 ph data[3]=0:6afc2000 (4fff) get Phys(data[n=4+5000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:6afc7000 set TERM ph data[3]=0:6afc2000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff028 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002390, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002410, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002e90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002e90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b5e000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:683fb000 ph data[0]=0:683fb000 (fff) get Phys(data[n=1+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:683fd000 ph data[1]=0:683fd000 (fff) get Phys(data[n=2+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:683fe000 ph data[1]=0:683fd000 (1fff) get Phys(data[n=2+2000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:683ff000 ph data[1]=0:683fd000 (2fff) get Phys(data[n=2+3000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:68400000 ph data[1]=0:683fd000 (3fff) get Phys(data[n=2+4000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:683f9000 ph data[2]=0:683f9000 (fff) get Phys(data[n=3+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:683fa000 ph data[2]=0:683f9000 (1fff) get Phys(data[n=3+2000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:68403000 ph data[3]=0:68403000 (fff) get Phys(data[n=4+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:68404000 ph data[3]=0:68403000 (1fff) get Phys(data[n=4+2000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:68405000 ph data[3]=0:68403000 (2fff) get Phys(data[n=4+3000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:68406000 ph data[3]=0:68403000 (3fff) get Phys(data[n=4+4000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:68407000 ph data[3]=0:68403000 (4fff) get Phys(data[n=4+5000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:68408000 ph data[3]=0:68403000 (5fff) get Phys(data[n=4+6000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:68401000 ph data[4]=0:68401000 (fff) get Phys(data[n=5+1000]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:68402000 ph data[4]=0:68401000 (1fff) get Phys(data[n=5+2000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:6840b000 set TERM ph data[5]=0:6840b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002e90, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x6, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002f10, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002f10, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b6e000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:6840c000 ph data[0]=0:6840c000 (fff) get Phys(data[n=1+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:6840d000 ph data[0]=0:6840c000 (1fff) get Phys(data[n=1+2000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:6840e000 ph data[0]=0:6840c000 (2fff) get Phys(data[n=1+3000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:6840f000 ph data[0]=0:6840c000 (3fff) get Phys(data[n=1+4000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:68410000 ph data[0]=0:6840c000 (4fff) get Phys(data[n=1+5000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:68409000 ph data[1]=0:68409000 (fff) get Phys(data[n=2+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:6840a000 ph data[1]=0:68409000 (1fff) get Phys(data[n=2+2000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:68413000 ph data[2]=0:68413000 (fff) get Phys(data[n=3+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:68414000 ph data[2]=0:68413000 (1fff) get Phys(data[n=3+2000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:68415000 ph data[2]=0:68413000 (2fff) get Phys(data[n=3+3000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:68416000 ph data[2]=0:68413000 (3fff) get Phys(data[n=3+4000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:68417000 ph data[2]=0:68413000 (4fff) get Phys(data[n=3+5000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:68418000 ph data[2]=0:68413000 (5fff) get Phys(data[n=3+6000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:68411000 ph data[3]=0:68411000 (fff) get Phys(data[n=4+1000]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:68412000 ph data[3]=0:68411000 (1fff) get Phys(data[n=4+2000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:6841b000 set TERM ph data[4]=0:6841b000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002f90, OrigWordsRequested 0x5000, DevSize 0x50 IdeReadWrite (REQ): Starting sector is 39002f90, Number of WORDS 0x5000, DevSize 0x50 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7e000, count a000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:6841c000 ph data[0]=0:6841c000 (fff) get Phys(data[n=1+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:6841d000 ph data[0]=0:6841c000 (1fff) get Phys(data[n=1+2000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:6841e000 ph data[0]=0:6841c000 (2fff) get Phys(data[n=1+3000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:6841f000 ph data[0]=0:6841c000 (3fff) get Phys(data[n=1+4000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:68420000 ph data[0]=0:6841c000 (4fff) get Phys(data[n=1+5000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:68419000 ph data[1]=0:68419000 (fff) get Phys(data[n=2+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:6841a000 ph data[1]=0:68419000 (1fff) get Phys(data[n=2+2000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:68423000 ph data[2]=0:68423000 (fff) get Phys(data[n=3+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:68424000 ph data[2]=0:68423000 (1fff) get Phys(data[n=3+2000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:68425000 set TERM ph data[2]=0:68423000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002f10, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x5, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff1a4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39719d60, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 39719d60, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b88000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:68426000 ph data[0]=0:68426000 (fff) get Phys(data[n=1+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:68427000 ph data[0]=0:68426000 (1fff) get Phys(data[n=1+2000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:68428000 ph data[0]=0:68426000 (2fff) get Phys(data[n=1+3000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:68421000 set TERM ph data[1]=0:68421000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002f90, Count 0x50(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x3, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 5000, WordsLeft 5000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a000, full size a000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39719d60, Count 0x20(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002290, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002290, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:6af90000 ph data[0]=0:6af90000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:6af91000 ph data[0]=0:6af90000 (1fff) get Phys(data[n=1+2000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:6af8a000 ph data[1]=0:6af8a000 (fff) get Phys(data[n=2+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:6af8b000 ph data[1]=0:6af8a000 (1fff) get Phys(data[n=2+2000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:6af8c000 ph data[1]=0:6af8a000 (2fff) get Phys(data[n=2+3000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:6af8d000 ph data[1]=0:6af8a000 (3fff) get Phys(data[n=2+4000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:6af8e000 ph data[1]=0:6af8a000 (4fff) get Phys(data[n=2+5000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:6af8f000 ph data[1]=0:6af8a000 (5fff) get Phys(data[n=2+6000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:6af98000 ph data[2]=0:6af98000 (fff) get Phys(data[n=3+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:6af99000 ph data[2]=0:6af98000 (1fff) get Phys(data[n=3+2000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:6af92000 ph data[3]=0:6af92000 (fff) get Phys(data[n=4+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:6af93000 ph data[3]=0:6af92000 (1fff) get Phys(data[n=4+2000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:6af94000 ph data[3]=0:6af92000 (2fff) get Phys(data[n=4+3000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:6af95000 ph data[3]=0:6af92000 (3fff) get Phys(data[n=4+4000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:6af96000 ph data[3]=0:6af92000 (4fff) get Phys(data[n=4+5000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:6af97000 set TERM ph data[3]=0:6af92000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002290, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002310, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002310, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:6afa0000 ph data[0]=0:6afa0000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:6afa1000 ph data[0]=0:6afa0000 (1fff) get Phys(data[n=1+2000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:6af9a000 ph data[1]=0:6af9a000 (fff) get Phys(data[n=2+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:6af9b000 ph data[1]=0:6af9a000 (1fff) get Phys(data[n=2+2000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:6af9c000 ph data[1]=0:6af9a000 (2fff) get Phys(data[n=2+3000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:6af9d000 ph data[1]=0:6af9a000 (3fff) get Phys(data[n=2+4000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:6af9e000 ph data[1]=0:6af9a000 (4fff) get Phys(data[n=2+5000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:6af9f000 ph data[1]=0:6af9a000 (5fff) get Phys(data[n=2+6000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:6afa8000 ph data[2]=0:6afa8000 (fff) get Phys(data[n=3+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:6afa9000 ph data[2]=0:6afa8000 (1fff) get Phys(data[n=3+2000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:6afa2000 ph data[3]=0:6afa2000 (fff) get Phys(data[n=4+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:6afa3000 ph data[3]=0:6afa2000 (1fff) get Phys(data[n=4+2000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:6afa4000 ph data[3]=0:6afa2000 (2fff) get Phys(data[n=4+3000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:6afa5000 ph data[3]=0:6afa2000 (3fff) get Phys(data[n=4+4000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:6afa6000 ph data[3]=0:6afa2000 (4fff) get Phys(data[n=4+5000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:6afa7000 set TERM ph data[3]=0:6afa2000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002390, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002390, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:6afb0000 ph data[0]=0:6afb0000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:6afb1000 ph data[0]=0:6afb0000 (1fff) get Phys(data[n=1+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:6afaa000 ph data[1]=0:6afaa000 (fff) get Phys(data[n=2+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:6afab000 ph data[1]=0:6afaa000 (1fff) get Phys(data[n=2+2000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:6afac000 ph data[1]=0:6afaa000 (2fff) get Phys(data[n=2+3000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:6afad000 ph data[1]=0:6afaa000 (3fff) get Phys(data[n=2+4000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:6afae000 ph data[1]=0:6afaa000 (4fff) get Phys(data[n=2+5000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:6afaf000 ph data[1]=0:6afaa000 (5fff) get Phys(data[n=2+6000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:6afb8000 ph data[2]=0:6afb8000 (fff) get Phys(data[n=3+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:6afb9000 ph data[2]=0:6afb8000 (1fff) get Phys(data[n=3+2000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:6afb2000 ph data[3]=0:6afb2000 (fff) get Phys(data[n=4+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:6afb3000 ph data[3]=0:6afb2000 (1fff) get Phys(data[n=4+2000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:6afb4000 ph data[3]=0:6afb2000 (2fff) get Phys(data[n=4+3000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:6afb5000 ph data[3]=0:6afb2000 (3fff) get Phys(data[n=4+4000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:6afb6000 ph data[3]=0:6afb2000 (4fff) get Phys(data[n=4+5000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:6afb7000 set TERM ph data[3]=0:6afb2000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff028 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002310, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002410, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002410, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:6afc0000 ph data[0]=0:6afc0000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:6afc1000 ph data[0]=0:6afc0000 (1fff) get Phys(data[n=1+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:6afba000 ph data[1]=0:6afba000 (fff) get Phys(data[n=2+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:6afbb000 ph data[1]=0:6afba000 (1fff) get Phys(data[n=2+2000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:6afbc000 ph data[1]=0:6afba000 (2fff) get Phys(data[n=2+3000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:6afbd000 ph data[1]=0:6afba000 (3fff) get Phys(data[n=2+4000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:6afbe000 ph data[1]=0:6afba000 (4fff) get Phys(data[n=2+5000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:6afbf000 ph data[1]=0:6afba000 (5fff) get Phys(data[n=2+6000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:6afc8000 ph data[2]=0:6afc8000 (fff) get Phys(data[n=3+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:6afc9000 ph data[2]=0:6afc8000 (1fff) get Phys(data[n=3+2000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:6afc2000 ph data[3]=0:6afc2000 (fff) get Phys(data[n=4+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:6afc3000 ph data[3]=0:6afc2000 (1fff) get Phys(data[n=4+2000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:6afc4000 ph data[3]=0:6afc2000 (2fff) get Phys(data[n=4+3000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:6afc5000 ph data[3]=0:6afc2000 (3fff) get Phys(data[n=4+4000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:6afc6000 ph data[3]=0:6afc2000 (4fff) get Phys(data[n=4+5000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:6afc7000 set TERM ph data[3]=0:6afc2000 (5fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002390, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002410, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 WARNING: HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002fe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002fe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b64000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:6af4f000 ph data[0]=0:6af4f000 (fff) get Phys(data[n=1+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:6af50000 ph data[0]=0:6af4f000 (1fff) get Phys(data[n=1+2000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:6af51000 ph data[0]=0:6af4f000 (2fff) get Phys(data[n=1+3000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:6af4a000 ph data[1]=0:6af4a000 (fff) get Phys(data[n=2+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:6af4b000 ph data[1]=0:6af4a000 (1fff) get Phys(data[n=2+2000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:6af4c000 ph data[1]=0:6af4a000 (2fff) get Phys(data[n=2+3000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:6af4d000 ph data[1]=0:6af4a000 (3fff) get Phys(data[n=2+4000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:6af4e000 ph data[1]=0:6af4a000 (4fff) get Phys(data[n=2+5000]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:6af57000 ph data[2]=0:6af57000 (fff) get Phys(data[n=3+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:6af58000 ph data[2]=0:6af57000 (1fff) get Phys(data[n=3+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:6af59000 ph data[2]=0:6af57000 (2fff) get Phys(data[n=3+3000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:6af52000 ph data[3]=0:6af52000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:6af53000 ph data[3]=0:6af52000 (1fff) get Phys(data[n=4+2000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:6af54000 ph data[3]=0:6af52000 (2fff) get Phys(data[n=4+3000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:6af55000 ph data[3]=0:6af52000 (3fff) get Phys(data[n=4+4000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:6af56000 set TERM ph data[3]=0:6af52000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002fe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39003060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39003060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b74000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:6af5f000 ph data[0]=0:6af5f000 (fff) get Phys(data[n=1+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:6af60000 ph data[0]=0:6af5f000 (1fff) get Phys(data[n=1+2000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:6af61000 ph data[0]=0:6af5f000 (2fff) get Phys(data[n=1+3000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:6af5a000 ph data[1]=0:6af5a000 (fff) get Phys(data[n=2+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:6af5b000 ph data[1]=0:6af5a000 (1fff) get Phys(data[n=2+2000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:6af5c000 ph data[1]=0:6af5a000 (2fff) get Phys(data[n=2+3000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:6af5d000 ph data[1]=0:6af5a000 (3fff) get Phys(data[n=2+4000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:6af5e000 ph data[1]=0:6af5a000 (4fff) get Phys(data[n=2+5000]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:6af67000 ph data[2]=0:6af67000 (fff) get Phys(data[n=3+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:6af68000 ph data[2]=0:6af67000 (1fff) get Phys(data[n=3+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:6af69000 ph data[2]=0:6af67000 (2fff) get Phys(data[n=3+3000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:6af62000 ph data[3]=0:6af62000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:6af63000 ph data[3]=0:6af62000 (1fff) get Phys(data[n=4+2000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:6af64000 ph data[3]=0:6af62000 (2fff) get Phys(data[n=4+3000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:6af65000 ph data[3]=0:6af62000 (3fff) get Phys(data[n=4+4000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:6af66000 set TERM ph data[3]=0:6af62000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390030e0, OrigWordsRequested 0x4000, DevSize 0x40 IdeReadWrite (REQ): Starting sector is 390030e0, Number of WORDS 0x4000, DevSize 0x40 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b84000, count 8000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:6af6f000 ph data[0]=0:6af6f000 (fff) get Phys(data[n=1+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:6af70000 ph data[0]=0:6af6f000 (1fff) get Phys(data[n=1+2000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:6af71000 ph data[0]=0:6af6f000 (2fff) get Phys(data[n=1+3000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:6af6a000 ph data[1]=0:6af6a000 (fff) get Phys(data[n=2+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:6af6b000 ph data[1]=0:6af6a000 (1fff) get Phys(data[n=2+2000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:6af6c000 ph data[1]=0:6af6a000 (2fff) get Phys(data[n=2+3000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:6af6d000 ph data[1]=0:6af6a000 (3fff) get Phys(data[n=2+4000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:6af6e000 set TERM ph data[1]=0:6af6a000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff028 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39003060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390030e0, Count 0x40(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x2, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 4000, WordsLeft 4000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8000, full size 8000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002fe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002fe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b64000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:6af4f000 ph data[0]=0:6af4f000 (fff) get Phys(data[n=1+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:6af50000 ph data[0]=0:6af4f000 (1fff) get Phys(data[n=1+2000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:6af51000 ph data[0]=0:6af4f000 (2fff) get Phys(data[n=1+3000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:6af4a000 ph data[1]=0:6af4a000 (fff) get Phys(data[n=2+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:6af4b000 ph data[1]=0:6af4a000 (1fff) get Phys(data[n=2+2000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:6af4c000 ph data[1]=0:6af4a000 (2fff) get Phys(data[n=2+3000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:6af4d000 ph data[1]=0:6af4a000 (3fff) get Phys(data[n=2+4000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:6af4e000 ph data[1]=0:6af4a000 (4fff) get Phys(data[n=2+5000]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:6af57000 ph data[2]=0:6af57000 (fff) get Phys(data[n=3+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:6af58000 ph data[2]=0:6af57000 (1fff) get Phys(data[n=3+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:6af59000 ph data[2]=0:6af57000 (2fff) get Phys(data[n=3+3000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:6af52000 ph data[3]=0:6af52000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:6af53000 ph data[3]=0:6af52000 (1fff) get Phys(data[n=4+2000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:6af54000 ph data[3]=0:6af52000 (2fff) get Phys(data[n=4+3000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:6af55000 ph data[3]=0:6af52000 (3fff) get Phys(data[n=4+4000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:6af56000 set TERM ph data[3]=0:6af52000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002fe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39003060, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39003060, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b74000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:6af5f000 ph data[0]=0:6af5f000 (fff) get Phys(data[n=1+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:6af60000 ph data[0]=0:6af5f000 (1fff) get Phys(data[n=1+2000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:6af61000 ph data[0]=0:6af5f000 (2fff) get Phys(data[n=1+3000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:6af5a000 ph data[1]=0:6af5a000 (fff) get Phys(data[n=2+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:6af5b000 ph data[1]=0:6af5a000 (1fff) get Phys(data[n=2+2000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:6af5c000 ph data[1]=0:6af5a000 (2fff) get Phys(data[n=2+3000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:6af5d000 ph data[1]=0:6af5a000 (3fff) get Phys(data[n=2+4000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:6af5e000 ph data[1]=0:6af5a000 (4fff) get Phys(data[n=2+5000]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:6af67000 ph data[2]=0:6af67000 (fff) get Phys(data[n=3+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:6af68000 ph data[2]=0:6af67000 (1fff) get Phys(data[n=3+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:6af69000 ph data[2]=0:6af67000 (2fff) get Phys(data[n=3+3000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:6af62000 ph data[3]=0:6af62000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:6af63000 ph data[3]=0:6af62000 (1fff) get Phys(data[n=4+2000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:6af64000 ph data[3]=0:6af62000 (2fff) get Phys(data[n=4+3000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:6af65000 ph data[3]=0:6af62000 (3fff) get Phys(data[n=4+4000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:6af66000 set TERM ph data[3]=0:6af62000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390030e0, OrigWordsRequested 0x4000, DevSize 0x40 IdeReadWrite (REQ): Starting sector is 390030e0, Number of WORDS 0x4000, DevSize 0x40 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b84000, count 8000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:6af6f000 ph data[0]=0:6af6f000 (fff) get Phys(data[n=1+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:6af70000 ph data[0]=0:6af6f000 (1fff) get Phys(data[n=1+2000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:6af71000 ph data[0]=0:6af6f000 (2fff) get Phys(data[n=1+3000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:6af6a000 ph data[1]=0:6af6a000 (fff) get Phys(data[n=2+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:6af6b000 ph data[1]=0:6af6a000 (1fff) get Phys(data[n=2+2000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:6af6c000 ph data[1]=0:6af6a000 (2fff) get Phys(data[n=2+3000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:6af6d000 ph data[1]=0:6af6a000 (3fff) get Phys(data[n=2+4000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:6af6e000 set TERM ph data[1]=0:6af6a000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff028 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39003060, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390030e0, Count 0x40(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 4000, WordsLeft 4000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8000, full size 8000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 WARNING: HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff1a4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39003150, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 39003150, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f7512000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f7512000) AtapiVirtToPhysAddr_: f7512000 -> 00000000:6af0e000 ph data[0]=0:6af0e000 (fff) get Phys(data[n=1+1000]=f7513000) AtapiVirtToPhysAddr_: f7513000 -> 00000000:6af0f000 ph data[0]=0:6af0e000 (1fff) get Phys(data[n=1+2000]=f7514000) AtapiVirtToPhysAddr_: f7514000 -> 00000000:6af10000 ph data[0]=0:6af0e000 (2fff) get Phys(data[n=1+3000]=f7515000) AtapiVirtToPhysAddr_: f7515000 -> 00000000:6af11000 set TERM ph data[0]=0:6af0e000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39003150, Count 0x20(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff1a4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39003150, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 39003150, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f7512000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f7512000) AtapiVirtToPhysAddr_: f7512000 -> 00000000:6af0e000 ph data[0]=0:6af0e000 (fff) get Phys(data[n=1+1000]=f7513000) AtapiVirtToPhysAddr_: f7513000 -> 00000000:6af0f000 ph data[0]=0:6af0e000 (1fff) get Phys(data[n=1+2000]=f7514000) AtapiVirtToPhysAddr_: f7514000 -> 00000000:6af10000 ph data[0]=0:6af0e000 (2fff) get Phys(data[n=1+3000]=f7515000) AtapiVirtToPhysAddr_: f7515000 -> 00000000:6af11000 set TERM ph data[0]=0:6af0e000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39003150, Count 0x20(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x1, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 WARNING: HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff1a4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39003120, OrigWordsRequested 0x3000, DevSize 0x30 IdeReadWrite (REQ): Starting sector is 39003120, Number of WORDS 0x3000, DevSize 0x30 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 6000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:6afd1000 ph data[0]=0:6afd1000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:6afca000 ph data[1]=0:6afca000 (fff) get Phys(data[n=2+1000]=f6c42000) AtapiVirtToPhysAddr_: f6c42000 -> 00000000:6afcb000 ph data[1]=0:6afca000 (1fff) get Phys(data[n=2+2000]=f6c43000) AtapiVirtToPhysAddr_: f6c43000 -> 00000000:6afcc000 ph data[1]=0:6afca000 (2fff) get Phys(data[n=2+3000]=f6c44000) AtapiVirtToPhysAddr_: f6c44000 -> 00000000:6afcd000 ph data[1]=0:6afca000 (3fff) get Phys(data[n=2+4000]=f6c45000) AtapiVirtToPhysAddr_: f6c45000 -> 00000000:6afce000 set TERM ph data[1]=0:6afca000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39003120, Count 0x30(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 3000, WordsLeft 3000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 6000, full size 6000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff1a4 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39003120, OrigWordsRequested 0x3000, DevSize 0x30 IdeReadWrite (REQ): Starting sector is 39003120, Number of WORDS 0x3000, DevSize 0x30 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6c40000, count 6000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6c40000) AtapiVirtToPhysAddr_: f6c40000 -> 00000000:6afd1000 ph data[0]=0:6afd1000 (fff) get Phys(data[n=1+1000]=f6c41000) AtapiVirtToPhysAddr_: f6c41000 -> 00000000:6afca000 ph data[1]=0:6afca000 (fff) get Phys(data[n=2+1000]=f6c42000) AtapiVirtToPhysAddr_: f6c42000 -> 00000000:6afcb000 ph data[1]=0:6afca000 (1fff) get Phys(data[n=2+2000]=f6c43000) AtapiVirtToPhysAddr_: f6c43000 -> 00000000:6afcc000 ph data[1]=0:6afca000 (2fff) get Phys(data[n=2+3000]=f6c44000) AtapiVirtToPhysAddr_: f6c44000 -> 00000000:6afcd000 ph data[1]=0:6afca000 (3fff) get Phys(data[n=2+4000]=f6c45000) AtapiVirtToPhysAddr_: f6c45000 -> 00000000:6afce000 set TERM ph data[1]=0:6afca000 (4fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39003120, Count 0x30(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x2, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 3000, WordsLeft 3000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 6000, full size 6000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 WARNING: HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED! WARNING: HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001d40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39001d40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:34da8000 ph data[0]=0:34da8000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:34da1000 ph data[1]=0:34da1000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:34da2000 ph data[1]=0:34da1000 (1fff) get Phys(data[n=2+2000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:34da3000 ph data[1]=0:34da1000 (2fff) get Phys(data[n=2+3000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:34da4000 ph data[1]=0:34da1000 (3fff) get Phys(data[n=2+4000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:34da5000 ph data[1]=0:34da1000 (4fff) get Phys(data[n=2+5000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:34da6000 ph data[1]=0:34da1000 (5fff) get Phys(data[n=2+6000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:34da7000 ph data[1]=0:34da1000 (6fff) get Phys(data[n=2+7000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:34db0000 ph data[2]=0:34db0000 (fff) get Phys(data[n=3+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:34da9000 ph data[3]=0:34da9000 (fff) get Phys(data[n=4+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:34daa000 ph data[3]=0:34da9000 (1fff) get Phys(data[n=4+2000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:34dab000 ph data[3]=0:34da9000 (2fff) get Phys(data[n=4+3000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:34dac000 ph data[3]=0:34da9000 (3fff) get Phys(data[n=4+4000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:34dad000 ph data[3]=0:34da9000 (4fff) get Phys(data[n=4+5000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:34dae000 ph data[3]=0:34da9000 (5fff) get Phys(data[n=4+6000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:34daf000 set TERM ph data[3]=0:34da9000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001d40, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001dc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39001dc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:34db8000 ph data[0]=0:34db8000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:34db1000 ph data[1]=0:34db1000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:34db2000 ph data[1]=0:34db1000 (1fff) get Phys(data[n=2+2000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:34db3000 ph data[1]=0:34db1000 (2fff) get Phys(data[n=2+3000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:34db4000 ph data[1]=0:34db1000 (3fff) get Phys(data[n=2+4000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:34db5000 ph data[1]=0:34db1000 (4fff) get Phys(data[n=2+5000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:34db6000 ph data[1]=0:34db1000 (5fff) get Phys(data[n=2+6000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:34db7000 ph data[1]=0:34db1000 (6fff) get Phys(data[n=2+7000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:34dc0000 ph data[2]=0:34dc0000 (fff) get Phys(data[n=3+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:34db9000 ph data[3]=0:34db9000 (fff) get Phys(data[n=4+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:34dba000 ph data[3]=0:34db9000 (1fff) get Phys(data[n=4+2000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:34dbb000 ph data[3]=0:34db9000 (2fff) get Phys(data[n=4+3000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:34dbc000 ph data[3]=0:34db9000 (3fff) get Phys(data[n=4+4000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:34dbd000 ph data[3]=0:34db9000 (4fff) get Phys(data[n=4+5000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:34dbe000 ph data[3]=0:34db9000 (5fff) get Phys(data[n=4+6000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:34dbf000 set TERM ph data[3]=0:34db9000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001e40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39001e40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:34dc8000 ph data[0]=0:34dc8000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:34dc1000 ph data[1]=0:34dc1000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:34dc2000 ph data[1]=0:34dc1000 (1fff) get Phys(data[n=2+2000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:34dc3000 ph data[1]=0:34dc1000 (2fff) get Phys(data[n=2+3000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:34dc4000 ph data[1]=0:34dc1000 (3fff) get Phys(data[n=2+4000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:34dc5000 ph data[1]=0:34dc1000 (4fff) get Phys(data[n=2+5000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:34dc6000 ph data[1]=0:34dc1000 (5fff) get Phys(data[n=2+6000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:34dc7000 ph data[1]=0:34dc1000 (6fff) get Phys(data[n=2+7000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:34dd0000 ph data[2]=0:34dd0000 (fff) get Phys(data[n=3+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:34dc9000 ph data[3]=0:34dc9000 (fff) get Phys(data[n=4+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:34dca000 ph data[3]=0:34dc9000 (1fff) get Phys(data[n=4+2000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:34dcb000 ph data[3]=0:34dc9000 (2fff) get Phys(data[n=4+3000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:34dcc000 ph data[3]=0:34dc9000 (3fff) get Phys(data[n=4+4000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:34dcd000 ph data[3]=0:34dc9000 (4fff) get Phys(data[n=4+5000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:34dce000 ph data[3]=0:34dc9000 (5fff) get Phys(data[n=4+6000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:34dcf000 set TERM ph data[3]=0:34dc9000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff028 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001dc0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001ec0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39001ec0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:34dd8000 ph data[0]=0:34dd8000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:34dd1000 ph data[1]=0:34dd1000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:34dd2000 ph data[1]=0:34dd1000 (1fff) get Phys(data[n=2+2000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:34dd3000 ph data[1]=0:34dd1000 (2fff) get Phys(data[n=2+3000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:34dd4000 ph data[1]=0:34dd1000 (3fff) get Phys(data[n=2+4000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:34dd5000 ph data[1]=0:34dd1000 (4fff) get Phys(data[n=2+5000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:34dd6000 ph data[1]=0:34dd1000 (5fff) get Phys(data[n=2+6000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:34dd7000 ph data[1]=0:34dd1000 (6fff) get Phys(data[n=2+7000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:34de0000 ph data[2]=0:34de0000 (fff) get Phys(data[n=3+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:34dd9000 ph data[3]=0:34dd9000 (fff) get Phys(data[n=4+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:34dda000 ph data[3]=0:34dd9000 (1fff) get Phys(data[n=4+2000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:34ddb000 ph data[3]=0:34dd9000 (2fff) get Phys(data[n=4+3000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:34ddc000 ph data[3]=0:34dd9000 (3fff) get Phys(data[n=4+4000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:34ddd000 ph data[3]=0:34dd9000 (4fff) get Phys(data[n=4+5000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:34dde000 ph data[3]=0:34dd9000 (5fff) get Phys(data[n=4+6000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:34ddf000 set TERM ph data[3]=0:34dd9000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff028 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001e40, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001ec0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb677d0a8 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002140, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39002140, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:34008000 ph data[0]=0:34008000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:34001000 ph data[1]=0:34001000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:34002000 ph data[1]=0:34001000 (1fff) get Phys(data[n=2+2000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:34003000 ph data[1]=0:34001000 (2fff) get Phys(data[n=2+3000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:34004000 ph data[1]=0:34001000 (3fff) get Phys(data[n=2+4000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:34005000 ph data[1]=0:34001000 (4fff) get Phys(data[n=2+5000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:34006000 ph data[1]=0:34001000 (5fff) get Phys(data[n=2+6000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:34007000 ph data[1]=0:34001000 (6fff) get Phys(data[n=2+7000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:34010000 ph data[2]=0:34010000 (fff) get Phys(data[n=3+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:34009000 ph data[3]=0:34009000 (fff) get Phys(data[n=4+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:3400a000 ph data[3]=0:34009000 (1fff) get Phys(data[n=4+2000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:3400b000 ph data[3]=0:34009000 (2fff) get Phys(data[n=4+3000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:3400c000 ph data[3]=0:34009000 (3fff) get Phys(data[n=4+4000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:3400d000 ph data[3]=0:34009000 (4fff) get Phys(data[n=4+5000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:3400e000 ph data[3]=0:34009000 (5fff) get Phys(data[n=4+6000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:3400f000 set TERM ph data[3]=0:34009000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002140, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 390021c0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 390021c0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:34018000 ph data[0]=0:34018000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:34011000 ph data[1]=0:34011000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:34012000 ph data[1]=0:34011000 (1fff) get Phys(data[n=2+2000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:34013000 ph data[1]=0:34011000 (2fff) get Phys(data[n=2+3000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:34014000 ph data[1]=0:34011000 (3fff) get Phys(data[n=2+4000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:34015000 ph data[1]=0:34011000 (4fff) get Phys(data[n=2+5000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:34016000 ph data[1]=0:34011000 (5fff) get Phys(data[n=2+6000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:34017000 ph data[1]=0:34011000 (6fff) get Phys(data[n=2+7000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:34020000 ph data[2]=0:34020000 (fff) get Phys(data[n=3+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:34019000 ph data[3]=0:34019000 (fff) get Phys(data[n=4+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:3401a000 ph data[3]=0:34019000 (1fff) get Phys(data[n=4+2000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:3401b000 ph data[3]=0:34019000 (2fff) get Phys(data[n=4+3000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:3401c000 ph data[3]=0:34019000 (3fff) get Phys(data[n=4+4000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:3401d000 ph data[3]=0:34019000 (4fff) get Phys(data[n=4+5000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:3401e000 ph data[3]=0:34019000 (5fff) get Phys(data[n=4+6000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:3401f000 set TERM ph data[3]=0:34019000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39002240, OrigWordsRequested 0x5000, DevSize 0x50 IdeReadWrite (REQ): Starting sector is 39002240, Number of WORDS 0x5000, DevSize 0x50 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b6c000, count a000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:34028000 ph data[0]=0:34028000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:34021000 ph data[1]=0:34021000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:34022000 ph data[1]=0:34021000 (1fff) get Phys(data[n=2+2000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:34023000 ph data[1]=0:34021000 (2fff) get Phys(data[n=2+3000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:34024000 ph data[1]=0:34021000 (3fff) get Phys(data[n=2+4000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:34025000 ph data[1]=0:34021000 (4fff) get Phys(data[n=2+5000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:34026000 ph data[1]=0:34021000 (5fff) get Phys(data[n=2+6000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:34027000 ph data[1]=0:34021000 (6fff) get Phys(data[n=2+7000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:34030000 ph data[2]=0:34030000 (fff) get Phys(data[n=3+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:34029000 set TERM ph data[3]=0:34029000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74feffc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x390021c0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 395e8700, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8700, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b76000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:3402a000 ph data[0]=0:3402a000 (fff) get Phys(data[n=1+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:3402b000 ph data[0]=0:3402a000 (1fff) get Phys(data[n=1+2000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:3402c000 ph data[0]=0:3402a000 (2fff) get Phys(data[n=1+3000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:3402d000 ph data[0]=0:3402a000 (3fff) get Phys(data[n=1+4000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:3402e000 ph data[0]=0:3402a000 (4fff) get Phys(data[n=1+5000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:3402f000 ph data[0]=0:3402a000 (5fff) get Phys(data[n=1+6000]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:34038000 ph data[1]=0:34038000 (fff) get Phys(data[n=2+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:34031000 ph data[2]=0:34031000 (fff) get Phys(data[n=3+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:34032000 ph data[2]=0:34031000 (1fff) get Phys(data[n=3+2000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:34033000 ph data[2]=0:34031000 (2fff) get Phys(data[n=3+3000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:34034000 ph data[2]=0:34031000 (3fff) get Phys(data[n=3+4000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:34035000 ph data[2]=0:34031000 (4fff) get Phys(data[n=3+5000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:34036000 ph data[2]=0:34031000 (5fff) get Phys(data[n=3+6000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:34037000 ph data[2]=0:34031000 (6fff) get Phys(data[n=3+7000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:34040000 ph data[3]=0:34040000 (fff) get Phys(data[n=4+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:34039000 set TERM ph data[4]=0:34039000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39002240, Count 0x50(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 395e8780, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 395e8780, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b86000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:3403a000 ph data[0]=0:3403a000 (fff) get Phys(data[n=1+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:3403b000 set TERM ph data[0]=0:3403a000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 5000, WordsLeft 5000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a000, full size a000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8700, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x5, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff1a4 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 395e8e70, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 395e8e70, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b88000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:3403c000 ph data[0]=0:3403c000 (fff) get Phys(data[n=1+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:3403d000 ph data[0]=0:3403c000 (1fff) get Phys(data[n=1+2000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:3403e000 ph data[0]=0:3403c000 (2fff) get Phys(data[n=1+3000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:3403f000 set TERM ph data[0]=0:3403c000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8780, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x0 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809fa970 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8e70, Count 0x20(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5de0478 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 395e8e90, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 395e8e90, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c12000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c12000) AtapiVirtToPhysAddr_: f6c12000 -> 00000000:31a30000 ph data[0]=0:31a30000 (fff) get Phys(data[n=1+1000]=f6c13000) AtapiVirtToPhysAddr_: f6c13000 -> 00000000:31a31000 ph data[0]=0:31a30000 (1fff) get Phys(data[n=1+2000]=f6c14000) AtapiVirtToPhysAddr_: f6c14000 -> 00000000:31a32000 ph data[0]=0:31a30000 (2fff) get Phys(data[n=1+3000]=f6c15000) AtapiVirtToPhysAddr_: f6c15000 -> 00000000:31a33000 ph data[0]=0:31a30000 (3fff) get Phys(data[n=1+4000]=f6c16000) AtapiVirtToPhysAddr_: f6c16000 -> 00000000:31a34000 ph data[0]=0:31a30000 (4fff) get Phys(data[n=1+5000]=f6c17000) AtapiVirtToPhysAddr_: f6c17000 -> 00000000:31a35000 ph data[0]=0:31a30000 (5fff) get Phys(data[n=1+6000]=f6c18000) AtapiVirtToPhysAddr_: f6c18000 -> 00000000:31a36000 ph data[0]=0:31a30000 (6fff) get Phys(data[n=1+7000]=f6c19000) AtapiVirtToPhysAddr_: f6c19000 -> 00000000:31a37000 ph data[0]=0:31a30000 (7fff) get Phys(data[n=1+8000]=f6c1a000) AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:31a38000 ph data[0]=0:31a30000 (8fff) get Phys(data[n=1+9000]=f6c1b000) AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:31a39000 ph data[0]=0:31a30000 (9fff) get Phys(data[n=1+a000]=f6c1c000) AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:31a3a000 ph data[0]=0:31a30000 (afff) get Phys(data[n=1+b000]=f6c1d000) AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:31a3b000 ph data[0]=0:31a30000 (bfff) get Phys(data[n=1+c000]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:31a3c000 ph data[0]=0:31a30000 (cfff) get Phys(data[n=1+d000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:31a3d000 ph data[0]=0:31a30000 (dfff) get Phys(data[n=1+e000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:31a3e000 ph data[0]=0:31a30000 (efff) get Phys(data[n=1+f000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:31a3f000 set TERM ph data[0]=0:31a30000 (ffff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8e90, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 395e8f10, OrigWordsRequested 0x2000, DevSize 0x20 IdeReadWrite (REQ): Starting sector is 395e8f10, Number of WORDS 0x2000, DevSize 0x20 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6c22000, count 4000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:31a40000 ph data[0]=0:31a40000 (fff) get Phys(data[n=1+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:31a41000 ph data[0]=0:31a40000 (1fff) get Phys(data[n=1+2000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:31a42000 ph data[0]=0:31a40000 (2fff) get Phys(data[n=1+3000]=f6c25000) AtapiVirtToPhysAddr_: f6c25000 -> 00000000:31a43000 set TERM ph data[0]=0:31a40000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x395e8f10, Count 0x20(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001d40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39001d40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:34da8000 ph data[0]=0:34da8000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:34da1000 ph data[1]=0:34da1000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:34da2000 ph data[1]=0:34da1000 (1fff) get Phys(data[n=2+2000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:34da3000 ph data[1]=0:34da1000 (2fff) get Phys(data[n=2+3000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:34da4000 ph data[1]=0:34da1000 (3fff) get Phys(data[n=2+4000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:34da5000 ph data[1]=0:34da1000 (4fff) get Phys(data[n=2+5000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:34da6000 ph data[1]=0:34da1000 (5fff) get Phys(data[n=2+6000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:34da7000 ph data[1]=0:34da1000 (6fff) get Phys(data[n=2+7000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:34db0000 ph data[2]=0:34db0000 (fff) get Phys(data[n=3+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:34da9000 ph data[3]=0:34da9000 (fff) get Phys(data[n=4+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:34daa000 ph data[3]=0:34da9000 (1fff) get Phys(data[n=4+2000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:34dab000 ph data[3]=0:34da9000 (2fff) get Phys(data[n=4+3000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:34dac000 ph data[3]=0:34da9000 (3fff) get Phys(data[n=4+4000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:34dad000 ph data[3]=0:34da9000 (4fff) get Phys(data[n=4+5000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:34dae000 ph data[3]=0:34da9000 (5fff) get Phys(data[n=4+6000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:34daf000 set TERM ph data[3]=0:34da9000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001d40, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001dc0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39001dc0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:34db8000 ph data[0]=0:34db8000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:34db1000 ph data[1]=0:34db1000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:34db2000 ph data[1]=0:34db1000 (1fff) get Phys(data[n=2+2000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:34db3000 ph data[1]=0:34db1000 (2fff) get Phys(data[n=2+3000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:34db4000 ph data[1]=0:34db1000 (3fff) get Phys(data[n=2+4000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:34db5000 ph data[1]=0:34db1000 (4fff) get Phys(data[n=2+5000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:34db6000 ph data[1]=0:34db1000 (5fff) get Phys(data[n=2+6000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:34db7000 ph data[1]=0:34db1000 (6fff) get Phys(data[n=2+7000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:34dc0000 ph data[2]=0:34dc0000 (fff) get Phys(data[n=3+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:34db9000 ph data[3]=0:34db9000 (fff) get Phys(data[n=4+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:34dba000 ph data[3]=0:34db9000 (1fff) get Phys(data[n=4+2000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:34dbb000 ph data[3]=0:34db9000 (2fff) get Phys(data[n=4+3000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:34dbc000 ph data[3]=0:34db9000 (3fff) get Phys(data[n=4+4000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:34dbd000 ph data[3]=0:34db9000 (4fff) get Phys(data[n=4+5000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:34dbe000 ph data[3]=0:34db9000 (5fff) get Phys(data[n=4+6000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:34dbf000 set TERM ph data[3]=0:34db9000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001e40, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39001e40, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:34dc8000 ph data[0]=0:34dc8000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:34dc1000 ph data[1]=0:34dc1000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:34dc2000 ph data[1]=0:34dc1000 (1fff) get Phys(data[n=2+2000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:34dc3000 ph data[1]=0:34dc1000 (2fff) get Phys(data[n=2+3000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:34dc4000 ph data[1]=0:34dc1000 (3fff) get Phys(data[n=2+4000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:34dc5000 ph data[1]=0:34dc1000 (4fff) get Phys(data[n=2+5000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:34dc6000 ph data[1]=0:34dc1000 (5fff) get Phys(data[n=2+6000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:34dc7000 ph data[1]=0:34dc1000 (6fff) get Phys(data[n=2+7000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:34dd0000 ph data[2]=0:34dd0000 (fff) get Phys(data[n=3+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:34dc9000 ph data[3]=0:34dc9000 (fff) get Phys(data[n=4+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:34dca000 ph data[3]=0:34dc9000 (1fff) get Phys(data[n=4+2000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:34dcb000 ph data[3]=0:34dc9000 (2fff) get Phys(data[n=4+3000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:34dcc000 ph data[3]=0:34dc9000 (3fff) get Phys(data[n=4+4000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:34dcd000 ph data[3]=0:34dc9000 (4fff) get Phys(data[n=4+5000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:34dce000 ph data[3]=0:34dc9000 (5fff) get Phys(data[n=4+6000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:34dcf000 set TERM ph data[3]=0:34dc9000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74feffc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001dc0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x4, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff154 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001ec0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 39001ec0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:34dd8000 ph data[0]=0:34dd8000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:34dd1000 ph data[1]=0:34dd1000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:34dd2000 ph data[1]=0:34dd1000 (1fff) get Phys(data[n=2+2000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:34dd3000 ph data[1]=0:34dd1000 (2fff) get Phys(data[n=2+3000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:34dd4000 ph data[1]=0:34dd1000 (3fff) get Phys(data[n=2+4000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:34dd5000 ph data[1]=0:34dd1000 (4fff) get Phys(data[n=2+5000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:34dd6000 ph data[1]=0:34dd1000 (5fff) get Phys(data[n=2+6000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:34dd7000 ph data[1]=0:34dd1000 (6fff) get Phys(data[n=2+7000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:34de0000 ph data[2]=0:34de0000 (fff) get Phys(data[n=3+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:34dd9000 ph data[3]=0:34dd9000 (fff) get Phys(data[n=4+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:34dda000 ph data[3]=0:34dd9000 (1fff) get Phys(data[n=4+2000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:34ddb000 ph data[3]=0:34dd9000 (2fff) get Phys(data[n=4+3000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:34ddc000 ph data[3]=0:34dd9000 (3fff) get Phys(data[n=4+4000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:34ddd000 ph data[3]=0:34dd9000 (4fff) get Phys(data[n=4+5000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:34dde000 ph data[3]=0:34dd9000 (5fff) get Phys(data[n=4+6000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:34ddf000 set TERM ph data[3]=0:34dd9000 (6fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001e40, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x4, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809faa18 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001ec0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x4, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 WARNING: HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED! TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960fe60, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 3960fe60, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f750e000, count 1000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:15d7e000 set TERM ph data[0]=0:15d7e000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fe60, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BD778, B6211538) called (drivers/filesystems/ntfs/create.c:342) NtfsCreateFile(B64BC778, B6211538) called AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960f660, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f660, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:023ea000 ph data[0]=0:23ea000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:023c3000 ph data[1]=0:23c3000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:0295c000 ph data[2]=0:295c000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:029e5000 ph data[3]=0:29e5000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:02af6000 ph data[4]=0:2af6000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:023ff000 ph data[5]=0:23ff000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:02ab0000 ph data[6]=0:2ab0000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:02321000 ph data[7]=0:2321000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:023f2000 ph data[8]=0:23f2000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:023cb000 ph data[9]=0:23cb000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:02964000 ph data[10]=0:2964000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:02a3d000 ph data[11]=0:2a3d000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:02afe000 ph data[12]=0:2afe000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:0244f000 ph data[13]=0:244f000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:02ac8000 ph data[14]=0:2ac8000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:02329000 set TERM ph data[15]=0:2329000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f660, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960f6e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f6e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:023b2000 ph data[0]=0:23b2000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:023d3000 ph data[1]=0:23d3000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:0296c000 ph data[2]=0:296c000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:0245d000 ph data[3]=0:245d000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:02b06000 ph data[4]=0:2b06000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:02457000 ph data[5]=0:2457000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:02ad0000 ph data[6]=0:2ad0000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:02331000 ph data[7]=0:2331000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:02972000 ph data[8]=0:2972000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:023db000 ph data[9]=0:23db000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:02974000 ph data[10]=0:2974000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:02465000 ph data[11]=0:2465000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:02b0e000 ph data[12]=0:2b0e000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:0245f000 ph data[13]=0:245f000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:02a38000 ph data[14]=0:2a38000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:02339000 set TERM ph data[15]=0:2339000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960f760, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f760, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:0298a000 ph data[0]=0:298a000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:02453000 ph data[1]=0:2453000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:029cc000 ph data[2]=0:29cc000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:0246d000 ph data[3]=0:246d000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:02b16000 ph data[4]=0:2b16000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:02957000 ph data[5]=0:2957000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:02a40000 ph data[6]=0:2a40000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:02359000 ph data[7]=0:2359000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:02992000 ph data[8]=0:2992000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:0245b000 ph data[9]=0:245b000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:02a3c000 ph data[10]=0:2a3c000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:02975000 ph data[11]=0:2975000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:02b1e000 ph data[12]=0:2b1e000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:0295f000 ph data[13]=0:295f000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:02a48000 ph data[14]=0:2a48000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:02361000 set TERM ph data[15]=0:2361000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74fef2c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f6e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960f7e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f7e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:0299a000 ph data[0]=0:299a000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:02463000 ph data[1]=0:2463000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:02a44000 ph data[2]=0:2a44000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:0297d000 ph data[3]=0:297d000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:02b26000 ph data[4]=0:2b26000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:029b7000 ph data[5]=0:29b7000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:02a50000 ph data[6]=0:2a50000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:02369000 ph data[7]=0:2369000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:029a2000 ph data[8]=0:29a2000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:0294b000 ph data[9]=0:294b000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:02a4c000 ph data[10]=0:2a4c000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:02995000 ph data[11]=0:2995000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:02b2e000 ph data[12]=0:2b2e000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:029bf000 ph data[13]=0:29bf000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:02a68000 ph data[14]=0:2a68000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:023b9000 set TERM ph data[15]=0:23b9000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74fef2c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f760, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f7e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960f860, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f860, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:10866000 ph data[0]=0:10866000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:029cf000 ph data[1]=0:29cf000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:10c08000 ph data[2]=0:10c08000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:023e1000 ph data[3]=0:23e1000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:01fe2000 ph data[4]=0:1fe2000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:10853000 ph data[5]=0:10853000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:10854000 ph data[5]=0:10853000 (1fff) get Phys(data[n=6+2000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:1085d000 ph data[6]=0:1085d000 (fff) get Phys(data[n=7+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:02346000 ph data[7]=0:2346000 (fff) get Phys(data[n=8+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:0bca7000 ph data[8]=0:bca7000 (fff) get Phys(data[n=9+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:02af0000 ph data[9]=0:2af0000 (fff) get Phys(data[n=10+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:0bcc9000 ph data[10]=0:bcc9000 (fff) get Phys(data[n=11+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:2ed12000 ph data[11]=0:2ed12000 (fff) get Phys(data[n=12+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:01f0b000 ph data[12]=0:1f0b000 (fff) get Phys(data[n=13+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:2ed14000 ph data[13]=0:2ed14000 (fff) get Phys(data[n=14+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:10bc5000 set TERM ph data[14]=0:10bc5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f860, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960f8e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f8e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:2ed0e000 ph data[0]=0:2ed0e000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:11a9f000 ph data[1]=0:11a9f000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:028e0000 ph data[2]=0:28e0000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:11ac9000 ph data[3]=0:11ac9000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:284ea000 ph data[4]=0:284ea000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:2ed13000 ph data[5]=0:2ed13000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:2e5d4000 ph data[6]=0:2e5d4000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:0209d000 ph data[7]=0:209d000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:2914e000 ph data[8]=0:2914e000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:2ed07000 ph data[9]=0:2ed07000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:10b78000 ph data[10]=0:10b78000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:29029000 ph data[11]=0:29029000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:2e50a000 ph data[12]=0:2e50a000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:2ed1b000 ph data[13]=0:2ed1b000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:0bcd4000 ph data[14]=0:bcd4000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:2ed0d000 set TERM ph data[15]=0:2ed0d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960f960, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f960, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:28616000 ph data[0]=0:28616000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:2902f000 ph data[1]=0:2902f000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:284e8000 ph data[2]=0:284e8000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:2ed11000 ph data[3]=0:2ed11000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:28ada000 ph data[4]=0:28ada000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:2e58b000 ph data[5]=0:2e58b000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:284e4000 ph data[6]=0:284e4000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:2ed65000 ph data[7]=0:2ed65000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:28606000 ph data[8]=0:28606000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:0bd57000 ph data[9]=0:bd57000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:12840000 ph data[10]=0:12840000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:2ed59000 ph data[11]=0:2ed59000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:26b82000 ph data[12]=0:26b82000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:024f3000 ph data[13]=0:24f3000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:29144000 ph data[14]=0:29144000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:284e5000 set TERM ph data[15]=0:284e5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f8e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960f9e0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960f9e0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:31886000 ph data[0]=0:31886000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:2916f000 ph data[1]=0:2916f000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:2ed60000 ph data[2]=0:2ed60000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:284e9000 ph data[3]=0:284e9000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:2887a000 ph data[4]=0:2887a000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:284eb000 ph data[5]=0:284eb000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:290a4000 ph data[6]=0:290a4000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:29145000 ph data[7]=0:29145000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:3187e000 ph data[8]=0:3187e000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:290d7000 ph data[9]=0:290d7000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:29168000 ph data[10]=0:29168000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:12239000 ph data[11]=0:12239000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:2917a000 ph data[12]=0:2917a000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:2867b000 ph data[13]=0:2867b000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:2c994000 ph data[14]=0:2c994000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:2b7c5000 set TERM ph data[15]=0:2b7c5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f960, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960f9e0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fa60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960fa60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:31876000 ph data[0]=0:31876000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:2ed67000 ph data[1]=0:2ed67000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:2ed08000 ph data[2]=0:2ed08000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:2af09000 ph data[3]=0:2af09000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:3187a000 ph data[4]=0:3187a000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:2916b000 ph data[5]=0:2916b000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:3187c000 ph data[6]=0:3187c000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:1dd05000 ph data[7]=0:1dd05000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:3186e000 ph data[8]=0:3186e000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:28617000 ph data[9]=0:28617000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:31880000 ph data[10]=0:31880000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:26b89000 ph data[11]=0:26b89000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:31872000 ph data[12]=0:31872000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:29123000 ph data[13]=0:29123000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:31874000 ph data[14]=0:31874000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:27b35000 set TERM ph data[15]=0:27b35000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fa60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fae0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960fae0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:31866000 ph data[0]=0:31866000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:2af3f000 ph data[1]=0:2af3f000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:31878000 ph data[2]=0:31878000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:31881000 ph data[3]=0:31881000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:3186a000 ph data[4]=0:3186a000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:2b73b000 ph data[5]=0:2b73b000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:3186c000 ph data[6]=0:3186c000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:31885000 ph data[7]=0:31885000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:3185e000 ph data[8]=0:3185e000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:31887000 ph data[9]=0:31887000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:31870000 ph data[10]=0:31870000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:31879000 ph data[11]=0:31879000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:31862000 ph data[12]=0:31862000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:27b33000 ph data[13]=0:27b33000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:31864000 ph data[14]=0:31864000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:3187d000 set TERM ph data[15]=0:3187d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fb60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960fb60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:31856000 ph data[0]=0:31856000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:3187f000 ph data[1]=0:3187f000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:31868000 ph data[2]=0:31868000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:31871000 ph data[3]=0:31871000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:3185a000 ph data[4]=0:3185a000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:3187b000 ph data[5]=0:3187b000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:3185c000 ph data[6]=0:3185c000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:31875000 ph data[7]=0:31875000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:3184e000 ph data[8]=0:3184e000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:31877000 ph data[9]=0:31877000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:31860000 ph data[10]=0:31860000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:31869000 ph data[11]=0:31869000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:31852000 ph data[12]=0:31852000 (fff) get Phys(data[n=13+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:31873000 ph data[13]=0:31873000 (fff) get Phys(data[n=14+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:31854000 ph data[14]=0:31854000 (fff) get Phys(data[n=15+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:3186d000 set TERM ph data[15]=0:3186d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fae0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x10, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fbe0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960fbe0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:2866e000 ph data[0]=0:2866e000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:3186f000 ph data[1]=0:3186f000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:31858000 ph data[2]=0:31858000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:31861000 ph data[3]=0:31861000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:3184a000 ph data[4]=0:3184a000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:3186b000 ph data[5]=0:3186b000 (fff) get Phys(data[n=6+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:3184c000 ph data[6]=0:3184c000 (fff) get Phys(data[n=7+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:31865000 ph data[7]=0:31865000 (fff) get Phys(data[n=8+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:29146000 ph data[8]=0:29146000 (fff) get Phys(data[n=9+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:31867000 ph data[9]=0:31867000 (fff) get Phys(data[n=10+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:31850000 ph data[10]=0:31850000 (fff) get Phys(data[n=11+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:31859000 ph data[11]=0:31859000 (fff) get Phys(data[n=12+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:31842000 ph data[12]=0:31842000 (fff) get Phys(data[n=13+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:31863000 ph data[13]=0:31863000 (fff) get Phys(data[n=14+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:31844000 ph data[14]=0:31844000 (fff) get Phys(data[n=15+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:3185d000 set TERM ph data[15]=0:3185d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fb60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fbe0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fc60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960fc60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:2886e000 ph data[0]=0:2886e000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:269c7000 ph data[1]=0:269c7000 (fff) get Phys(data[n=2+1000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:29118000 ph data[2]=0:29118000 (fff) get Phys(data[n=3+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:284e1000 ph data[3]=0:284e1000 (fff) get Phys(data[n=4+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:29122000 ph data[4]=0:29122000 (fff) get Phys(data[n=5+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:290b3000 ph data[5]=0:290b3000 (fff) get Phys(data[n=6+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:1dcdc000 ph data[6]=0:1dcdc000 (fff) get Phys(data[n=7+1000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:024f5000 ph data[7]=0:24f5000 (fff) get Phys(data[n=8+1000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:29136000 ph data[8]=0:29136000 (fff) get Phys(data[n=9+1000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:27b27000 ph data[9]=0:27b27000 (fff) get Phys(data[n=10+1000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:1f398000 ph data[10]=0:1f398000 (fff) get Phys(data[n=11+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:28871000 ph data[11]=0:28871000 (fff) get Phys(data[n=12+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:2b74a000 ph data[12]=0:2b74a000 (fff) get Phys(data[n=13+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:15d7b000 ph data[13]=0:15d7b000 (fff) get Phys(data[n=14+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:29124000 ph data[14]=0:29124000 (fff) get Phys(data[n=15+1000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:15d6d000 set TERM ph data[15]=0:15d6d000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fc60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x10, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fce0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960fce0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:0bcde000 ph data[0]=0:bcde000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:284df000 ph data[1]=0:284df000 (fff) get Phys(data[n=2+1000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:1dcf8000 ph data[2]=0:1dcf8000 (fff) get Phys(data[n=3+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:28fd1000 ph data[3]=0:28fd1000 (fff) get Phys(data[n=4+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:29172000 ph data[4]=0:29172000 (fff) get Phys(data[n=5+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:28fcb000 ph data[5]=0:28fcb000 (fff) get Phys(data[n=6+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:15e7c000 ph data[6]=0:15e7c000 (fff) get Phys(data[n=7+1000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:1211d000 ph data[7]=0:1211d000 (fff) get Phys(data[n=8+1000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:15e5e000 ph data[8]=0:15e5e000 (fff) get Phys(data[n=9+1000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:15e77000 ph data[9]=0:15e77000 (fff) get Phys(data[n=10+1000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:29038000 ph data[10]=0:29038000 (fff) get Phys(data[n=11+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:10a51000 ph data[11]=0:10a51000 (fff) get Phys(data[n=12+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:284f2000 ph data[12]=0:284f2000 (fff) get Phys(data[n=13+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:15e7b000 ph data[13]=0:15e7b000 (fff) get Phys(data[n=14+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:15d84000 ph data[14]=0:15d84000 (fff) get Phys(data[n=15+1000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:12fb5000 set TERM ph data[15]=0:12fb5000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fd60, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960fd60, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:afd1e000 ph data[0]=0:afd1e000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:11a97000 ph data[1]=0:11a97000 (fff) get Phys(data[n=2+1000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:10bf8000 ph data[2]=0:10bf8000 (fff) get Phys(data[n=3+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:12351000 ph data[3]=0:12351000 (fff) get Phys(data[n=4+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:28fca000 ph data[4]=0:28fca000 (fff) get Phys(data[n=5+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:10a3b000 ph data[5]=0:10a3b000 (fff) get Phys(data[n=6+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:27b34000 ph data[6]=0:27b34000 (fff) get Phys(data[n=7+1000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:11a7d000 ph data[7]=0:11a7d000 (fff) get Phys(data[n=8+1000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:6dc6e000 ph data[8]=0:6dc6e000 (fff) get Phys(data[n=9+1000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:1376f000 ph data[9]=0:1376f000 (fff) get Phys(data[n=10+1000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:028a8000 ph data[10]=0:28a8000 (fff) get Phys(data[n=11+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:15e61000 ph data[11]=0:15e61000 (fff) get Phys(data[n=12+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:15e62000 ph data[11]=0:15e61000 (1fff) get Phys(data[n=12+2000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:1211b000 ph data[12]=0:1211b000 (fff) get Phys(data[n=13+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:28fd4000 ph data[13]=0:28fd4000 (fff) get Phys(data[n=14+1000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:15d85000 set TERM ph data[14]=0:15d85000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fce0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x10, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fde0, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 3960fde0, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:269c6000 ph data[0]=0:269c6000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:13777000 ph data[1]=0:13777000 (fff) get Phys(data[n=2+1000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:12240000 ph data[2]=0:12240000 (fff) get Phys(data[n=3+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:15db1000 ph data[3]=0:15db1000 (fff) get Phys(data[n=4+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:15d8a000 ph data[4]=0:15d8a000 (fff) get Phys(data[n=5+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:15d8b000 ph data[4]=0:15d8a000 (1fff) get Phys(data[n=5+2000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:2ed1c000 ph data[5]=0:2ed1c000 (fff) get Phys(data[n=6+1000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:15d8d000 ph data[6]=0:15d8d000 (fff) get Phys(data[n=7+1000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:afcb6000 ph data[7]=0:afcb6000 (fff) get Phys(data[n=8+1000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:1377f000 ph data[8]=0:1377f000 (fff) get Phys(data[n=9+1000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:284f0000 ph data[9]=0:284f0000 (fff) get Phys(data[n=10+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:13771000 ph data[10]=0:13771000 (fff) get Phys(data[n=11+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:26a42000 ph data[11]=0:26a42000 (fff) get Phys(data[n=12+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:15d93000 ph data[12]=0:15d93000 (fff) get Phys(data[n=13+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:15e84000 ph data[13]=0:15e84000 (fff) get Phys(data[n=14+1000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:15d95000 set TERM ph data[14]=0:15d95000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fd60, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0xf, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fde0, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0xf, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff0a8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 3960fe60, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 3960fe60, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:15d7e000 ph data[0]=0:15d7e000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:13787000 set TERM ph data[1]=0:13787000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fe60, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74fef90 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:1377e000 ph data[0]=0:1377e000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:2851f000 set TERM ph data[1]=0:2851f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x5, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff0a8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:1377e000 ph data[0]=0:1377e000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:2851f000 set TERM ph data[1]=0:2851f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f95800, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff0a8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fb4300, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fb4300, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:02ca4000 ph data[0]=0:2ca4000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:02ca5000 set TERM ph data[0]=0:2ca4000 (1fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fb4300, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x1, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff0a8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 39001d30, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 39001d30, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:6bbd5000 ph data[0]=0:6bbd5000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:6bbce000 set TERM ph data[1]=0:6bbce000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x39001d30, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff0a8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38fac490, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38fac490, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:290c6000 ph data[0]=0:290c6000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:2b74f000 set TERM ph data[1]=0:2b74f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38fac490, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff0a8 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10 IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f750e000) AtapiVirtToPhysAddr_: f750e000 -> 00000000:2913e000 ph data[0]=0:2913e000 (fff) get Phys(data[n=1+1000]=f750f000) AtapiVirtToPhysAddr_: f750f000 -> 00000000:3185f000 set TERM ph data[1]=0:3185f000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38faca20, Count 0x10(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x2, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=0 Send to device 2a TopLevel (2), srb 0xb5df8710 TopLevel (3), AtaReq 0xb6777018 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f9143c, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f9143c, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:00f3e000 ph data[0]=0:f3e000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:00f3f000 ph data[0]=0:f3e000 (1fff) get Phys(data[n=1+2000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:00f18000 ph data[1]=0:f18000 (fff) get Phys(data[n=2+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:00f21000 ph data[2]=0:f21000 (fff) get Phys(data[n=3+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:00f2a000 ph data[3]=0:f2a000 (fff) get Phys(data[n=4+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:00f33000 ph data[4]=0:f33000 (fff) get Phys(data[n=5+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:00f34000 ph data[4]=0:f33000 (1fff) get Phys(data[n=5+2000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:00f35000 ph data[4]=0:f33000 (2fff) get Phys(data[n=5+3000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:00f36000 ph data[4]=0:f33000 (3fff) get Phys(data[n=5+4000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:00f37000 ph data[4]=0:f33000 (4fff) get Phys(data[n=5+5000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:00f10000 ph data[5]=0:f10000 (fff) get Phys(data[n=6+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:00f19000 ph data[6]=0:f19000 (fff) get Phys(data[n=7+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:00f22000 ph data[7]=0:f22000 (fff) get Phys(data[n=8+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:00f2b000 ph data[8]=0:f2b000 (fff) get Phys(data[n=9+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:00f2c000 ph data[8]=0:f2b000 (1fff) get Phys(data[n=9+2000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:00f2d000 set TERM ph data[8]=0:f2b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f9143c, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x9, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=1 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f914bc, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f914bc, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:00f2e000 ph data[0]=0:f2e000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:00f2f000 ph data[0]=0:f2e000 (1fff) get Phys(data[n=1+2000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:00f08000 ph data[1]=0:f08000 (fff) get Phys(data[n=2+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:00f11000 ph data[2]=0:f11000 (fff) get Phys(data[n=3+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:00f1a000 ph data[3]=0:f1a000 (fff) get Phys(data[n=4+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:00f23000 ph data[4]=0:f23000 (fff) get Phys(data[n=5+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:00f24000 ph data[4]=0:f23000 (1fff) get Phys(data[n=5+2000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:00f25000 ph data[4]=0:f23000 (2fff) get Phys(data[n=5+3000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:00f26000 ph data[4]=0:f23000 (3fff) get Phys(data[n=5+4000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:00f27000 ph data[4]=0:f23000 (4fff) get Phys(data[n=5+5000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:00f00000 ph data[5]=0:f00000 (fff) get Phys(data[n=6+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:00f09000 ph data[6]=0:f09000 (fff) get Phys(data[n=7+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:00f12000 ph data[7]=0:f12000 (fff) get Phys(data[n=8+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:00f1b000 ph data[8]=0:f1b000 (fff) get Phys(data[n=9+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:00f1c000 ph data[8]=0:f1b000 (1fff) get Phys(data[n=9+2000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:00f1d000 set TERM ph data[8]=0:f1b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 2 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f9153c, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f9153c, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:00f1e000 ph data[0]=0:f1e000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:00f1f000 ph data[0]=0:f1e000 (1fff) get Phys(data[n=1+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:00ef8000 ph data[1]=0:ef8000 (fff) get Phys(data[n=2+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:00f01000 ph data[2]=0:f01000 (fff) get Phys(data[n=3+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:00f0a000 ph data[3]=0:f0a000 (fff) get Phys(data[n=4+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:00f13000 ph data[4]=0:f13000 (fff) get Phys(data[n=5+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:00f14000 ph data[4]=0:f13000 (1fff) get Phys(data[n=5+2000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:00f15000 ph data[4]=0:f13000 (2fff) get Phys(data[n=5+3000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:00f16000 ph data[4]=0:f13000 (3fff) get Phys(data[n=5+4000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:00f17000 ph data[4]=0:f13000 (4fff) get Phys(data[n=5+5000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:00ef0000 ph data[5]=0:ef0000 (fff) get Phys(data[n=6+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:00ef9000 ph data[6]=0:ef9000 (fff) get Phys(data[n=7+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:00f02000 ph data[7]=0:f02000 (fff) get Phys(data[n=8+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:00f0b000 ph data[8]=0:f0b000 (fff) get Phys(data[n=9+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:00f0c000 ph data[8]=0:f0b000 (1fff) get Phys(data[n=9+2000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:00f0d000 set TERM ph data[8]=0:f0b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74fef2c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f914bc, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x9, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=2 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6777018 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f915bc, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f915bc, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6777018: cmd aligned b6777080, d=8 ahci_cmd_ptr 0xb6777080 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6777080) AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:00f0e000 ph data[0]=0:f0e000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:00f0f000 ph data[0]=0:f0e000 (1fff) get Phys(data[n=1+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:00ee8000 ph data[1]=0:ee8000 (fff) get Phys(data[n=2+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:00ef1000 ph data[2]=0:ef1000 (fff) get Phys(data[n=3+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:00efa000 ph data[3]=0:efa000 (fff) get Phys(data[n=4+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:00f03000 ph data[4]=0:f03000 (fff) get Phys(data[n=5+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:00f04000 ph data[4]=0:f03000 (1fff) get Phys(data[n=5+2000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:00f05000 ph data[4]=0:f03000 (2fff) get Phys(data[n=5+3000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:00f06000 ph data[4]=0:f03000 (3fff) get Phys(data[n=5+4000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:00f07000 ph data[4]=0:f03000 (4fff) get Phys(data[n=5+5000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:00ee0000 ph data[5]=0:ee0000 (fff) get Phys(data[n=6+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:00ee9000 ph data[6]=0:ee9000 (fff) get Phys(data[n=7+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:00ef2000 ph data[7]=0:ef2000 (fff) get Phys(data[n=8+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:00efb000 ph data[8]=0:efb000 (fff) get Phys(data[n=9+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:00efc000 ph data[8]=0:efb000 (1fff) get Phys(data[n=9+2000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:00efd000 set TERM ph data[8]=0:efb000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6777080, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 3 request(s)! AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=3 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6781108 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93c1e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93c1e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6781108: cmd aligned b6781180, d=18 ahci_cmd_ptr 0xb6781180 AtapiDmaSetup: mode 0x0, data f6b4c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6781180) AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180 get Phys(data[0]=f6b4c000) AtapiVirtToPhysAddr_: f6b4c000 -> 00000000:00f3e000 ph data[0]=0:f3e000 (fff) get Phys(data[n=1+1000]=f6b4d000) AtapiVirtToPhysAddr_: f6b4d000 -> 00000000:00f3f000 ph data[0]=0:f3e000 (1fff) get Phys(data[n=1+2000]=f6b4e000) AtapiVirtToPhysAddr_: f6b4e000 -> 00000000:00f18000 ph data[1]=0:f18000 (fff) get Phys(data[n=2+1000]=f6b4f000) AtapiVirtToPhysAddr_: f6b4f000 -> 00000000:00f21000 ph data[2]=0:f21000 (fff) get Phys(data[n=3+1000]=f6b50000) AtapiVirtToPhysAddr_: f6b50000 -> 00000000:00f2a000 ph data[3]=0:f2a000 (fff) get Phys(data[n=4+1000]=f6b51000) AtapiVirtToPhysAddr_: f6b51000 -> 00000000:00f33000 ph data[4]=0:f33000 (fff) get Phys(data[n=5+1000]=f6b52000) AtapiVirtToPhysAddr_: f6b52000 -> 00000000:00f34000 ph data[4]=0:f33000 (1fff) get Phys(data[n=5+2000]=f6b53000) AtapiVirtToPhysAddr_: f6b53000 -> 00000000:00f35000 ph data[4]=0:f33000 (2fff) get Phys(data[n=5+3000]=f6b54000) AtapiVirtToPhysAddr_: f6b54000 -> 00000000:00f36000 ph data[4]=0:f33000 (3fff) get Phys(data[n=5+4000]=f6b55000) AtapiVirtToPhysAddr_: f6b55000 -> 00000000:00f37000 ph data[4]=0:f33000 (4fff) get Phys(data[n=5+5000]=f6b56000) AtapiVirtToPhysAddr_: f6b56000 -> 00000000:00f10000 ph data[5]=0:f10000 (fff) get Phys(data[n=6+1000]=f6b57000) AtapiVirtToPhysAddr_: f6b57000 -> 00000000:00f19000 ph data[6]=0:f19000 (fff) get Phys(data[n=7+1000]=f6b58000) AtapiVirtToPhysAddr_: f6b58000 -> 00000000:00f22000 ph data[7]=0:f22000 (fff) get Phys(data[n=8+1000]=f6b59000) AtapiVirtToPhysAddr_: f6b59000 -> 00000000:00f2b000 ph data[8]=0:f2b000 (fff) get Phys(data[n=9+1000]=f6b5a000) AtapiVirtToPhysAddr_: f6b5a000 -> 00000000:00f2c000 ph data[8]=0:f2b000 (1fff) get Phys(data[n=9+2000]=f6b5b000) AtapiVirtToPhysAddr_: f6b5b000 -> 00000000:00f2d000 set TERM ph data[8]=0:f2b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6781180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 4 request(s)! AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6783138 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93c9e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93c9e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6783138: cmd aligned b6783200, d=68 ahci_cmd_ptr 0xb6783200 AtapiDmaSetup: mode 0x0, data f6b5c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6783200) AtapiVirtToPhysAddr_: b6783200 -> 00000000:08e46200 get Phys(data[0]=f6b5c000) AtapiVirtToPhysAddr_: f6b5c000 -> 00000000:00f2e000 ph data[0]=0:f2e000 (fff) get Phys(data[n=1+1000]=f6b5d000) AtapiVirtToPhysAddr_: f6b5d000 -> 00000000:00f2f000 ph data[0]=0:f2e000 (1fff) get Phys(data[n=1+2000]=f6b5e000) AtapiVirtToPhysAddr_: f6b5e000 -> 00000000:00f08000 ph data[1]=0:f08000 (fff) get Phys(data[n=2+1000]=f6b5f000) AtapiVirtToPhysAddr_: f6b5f000 -> 00000000:00f11000 ph data[2]=0:f11000 (fff) get Phys(data[n=3+1000]=f6b60000) AtapiVirtToPhysAddr_: f6b60000 -> 00000000:00f1a000 ph data[3]=0:f1a000 (fff) get Phys(data[n=4+1000]=f6b61000) AtapiVirtToPhysAddr_: f6b61000 -> 00000000:00f23000 ph data[4]=0:f23000 (fff) get Phys(data[n=5+1000]=f6b62000) AtapiVirtToPhysAddr_: f6b62000 -> 00000000:00f24000 ph data[4]=0:f23000 (1fff) get Phys(data[n=5+2000]=f6b63000) AtapiVirtToPhysAddr_: f6b63000 -> 00000000:00f25000 ph data[4]=0:f23000 (2fff) get Phys(data[n=5+3000]=f6b64000) AtapiVirtToPhysAddr_: f6b64000 -> 00000000:00f26000 ph data[4]=0:f23000 (3fff) get Phys(data[n=5+4000]=f6b65000) AtapiVirtToPhysAddr_: f6b65000 -> 00000000:00f27000 ph data[4]=0:f23000 (4fff) get Phys(data[n=5+5000]=f6b66000) AtapiVirtToPhysAddr_: f6b66000 -> 00000000:00f00000 ph data[5]=0:f00000 (fff) get Phys(data[n=6+1000]=f6b67000) AtapiVirtToPhysAddr_: f6b67000 -> 00000000:00f09000 ph data[6]=0:f09000 (fff) get Phys(data[n=7+1000]=f6b68000) AtapiVirtToPhysAddr_: f6b68000 -> 00000000:00f12000 ph data[7]=0:f12000 (fff) get Phys(data[n=8+1000]=f6b69000) AtapiVirtToPhysAddr_: f6b69000 -> 00000000:00f1b000 ph data[8]=0:f1b000 (fff) get Phys(data[n=9+1000]=f6b6a000) AtapiVirtToPhysAddr_: f6b6a000 -> 00000000:00f1c000 ph data[8]=0:f1b000 (1fff) get Phys(data[n=9+2000]=f6b6b000) AtapiVirtToPhysAddr_: f6b6b000 -> 00000000:00f1d000 set TERM ph data[8]=0:f1b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6783200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74fef2c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f9153c, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb677d0a8 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93d1e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93d1e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb677d0a8: cmd aligned b677d180, d=78 ahci_cmd_ptr 0xb677d180 AtapiDmaSetup: mode 0x0, data f6b6c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b677d180) AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180 get Phys(data[0]=f6b6c000) AtapiVirtToPhysAddr_: f6b6c000 -> 00000000:00f1e000 ph data[0]=0:f1e000 (fff) get Phys(data[n=1+1000]=f6b6d000) AtapiVirtToPhysAddr_: f6b6d000 -> 00000000:00f1f000 ph data[0]=0:f1e000 (1fff) get Phys(data[n=1+2000]=f6b6e000) AtapiVirtToPhysAddr_: f6b6e000 -> 00000000:00ef8000 ph data[1]=0:ef8000 (fff) get Phys(data[n=2+1000]=f6b6f000) AtapiVirtToPhysAddr_: f6b6f000 -> 00000000:00f01000 ph data[2]=0:f01000 (fff) get Phys(data[n=3+1000]=f6b70000) AtapiVirtToPhysAddr_: f6b70000 -> 00000000:00f0a000 ph data[3]=0:f0a000 (fff) get Phys(data[n=4+1000]=f6b71000) AtapiVirtToPhysAddr_: f6b71000 -> 00000000:00f13000 ph data[4]=0:f13000 (fff) get Phys(data[n=5+1000]=f6b72000) AtapiVirtToPhysAddr_: f6b72000 -> 00000000:00f14000 ph data[4]=0:f13000 (1fff) get Phys(data[n=5+2000]=f6b73000) AtapiVirtToPhysAddr_: f6b73000 -> 00000000:00f15000 ph data[4]=0:f13000 (2fff) get Phys(data[n=5+3000]=f6b74000) AtapiVirtToPhysAddr_: f6b74000 -> 00000000:00f16000 ph data[4]=0:f13000 (3fff) get Phys(data[n=5+4000]=f6b75000) AtapiVirtToPhysAddr_: f6b75000 -> 00000000:00f17000 ph data[4]=0:f13000 (4fff) get Phys(data[n=5+5000]=f6b76000) AtapiVirtToPhysAddr_: f6b76000 -> 00000000:00ef0000 ph data[5]=0:ef0000 (fff) get Phys(data[n=6+1000]=f6b77000) AtapiVirtToPhysAddr_: f6b77000 -> 00000000:00ef9000 ph data[6]=0:ef9000 (fff) get Phys(data[n=7+1000]=f6b78000) AtapiVirtToPhysAddr_: f6b78000 -> 00000000:00f02000 ph data[7]=0:f02000 (fff) get Phys(data[n=8+1000]=f6b79000) AtapiVirtToPhysAddr_: f6b79000 -> 00000000:00f0b000 ph data[8]=0:f0b000 (fff) get Phys(data[n=9+1000]=f6b7a000) AtapiVirtToPhysAddr_: f6b7a000 -> 00000000:00f0c000 ph data[8]=0:f0b000 (1fff) get Phys(data[n=9+2000]=f6b7b000) AtapiVirtToPhysAddr_: f6b7b000 -> 00000000:00f0d000 set TERM ph data[8]=0:f0b000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b677d180, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0xb5df8710 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df8710, CDB 0xb5df8740, AtaReq 0xb6777018, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6777018 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f915bc, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018 AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080) prd_length 0x9, flags 0x45, base 8e3a080 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df8710 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: TopLevel, qd=4 Non-empty queue Try IDE prepare ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf74ff058 ** Ide: Command AtaReq 0xb6782120 ** --- ** ** Ide: Command continue prep IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 Attention: SCSIOP_WRITE on 2TB IdeReadWrite (Orig REQ): Starting sector 38f93d9e, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 38f93d9e, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6b7c000, count 10000, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6b7c000) AtapiVirtToPhysAddr_: f6b7c000 -> 00000000:00f0e000 ph data[0]=0:f0e000 (fff) get Phys(data[n=1+1000]=f6b7d000) AtapiVirtToPhysAddr_: f6b7d000 -> 00000000:00f0f000 ph data[0]=0:f0e000 (1fff) get Phys(data[n=1+2000]=f6b7e000) AtapiVirtToPhysAddr_: f6b7e000 -> 00000000:00ee8000 ph data[1]=0:ee8000 (fff) get Phys(data[n=2+1000]=f6b7f000) AtapiVirtToPhysAddr_: f6b7f000 -> 00000000:00ef1000 ph data[2]=0:ef1000 (fff) get Phys(data[n=3+1000]=f6b80000) AtapiVirtToPhysAddr_: f6b80000 -> 00000000:00efa000 ph data[3]=0:efa000 (fff) get Phys(data[n=4+1000]=f6b81000) AtapiVirtToPhysAddr_: f6b81000 -> 00000000:00f03000 ph data[4]=0:f03000 (fff) get Phys(data[n=5+1000]=f6b82000) AtapiVirtToPhysAddr_: f6b82000 -> 00000000:00f04000 ph data[4]=0:f03000 (1fff) get Phys(data[n=5+2000]=f6b83000) AtapiVirtToPhysAddr_: f6b83000 -> 00000000:00f05000 ph data[4]=0:f03000 (2fff) get Phys(data[n=5+3000]=f6b84000) AtapiVirtToPhysAddr_: f6b84000 -> 00000000:00f06000 ph data[4]=0:f03000 (3fff) get Phys(data[n=5+4000]=f6b85000) AtapiVirtToPhysAddr_: f6b85000 -> 00000000:00f07000 ph data[4]=0:f03000 (4fff) get Phys(data[n=5+5000]=f6b86000) AtapiVirtToPhysAddr_: f6b86000 -> 00000000:00ee0000 ph data[5]=0:ee0000 (fff) get Phys(data[n=6+1000]=f6b87000) AtapiVirtToPhysAddr_: f6b87000 -> 00000000:00ee9000 ph data[6]=0:ee9000 (fff) get Phys(data[n=7+1000]=f6b88000) AtapiVirtToPhysAddr_: f6b88000 -> 00000000:00ef2000 ph data[7]=0:ef2000 (fff) get Phys(data[n=8+1000]=f6b89000) AtapiVirtToPhysAddr_: f6b89000 -> 00000000:00efb000 ph data[8]=0:efb000 (fff) get Phys(data[n=9+1000]=f6b8a000) AtapiVirtToPhysAddr_: f6b8a000 -> 00000000:00efc000 ph data[8]=0:efb000 (1fff) get Phys(data[n=9+2000]=f6b8b000) AtapiVirtToPhysAddr_: f6b8b000 -> 00000000:00efd000 set TERM ph data[8]=0:efb000 (2fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 45: IdeSendCommand: SRB_STATUS_PENDING AtapiStartIo: Already have 5 request(s)! AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df8710, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df8710 AtapiInterrupt: NextRequest, srb=0xb5e4f948 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5e4f948, CDB 0xb5e4f978, AtaReq 0xb6781108, SCmd 0x2a UniataNeedQueueing: qd=4 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77fdcbc ** Ide: Command AtaReq 0xb6781108 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93c1e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108 AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180) prd_length 0x9, flags 0x45, base 8e44180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5e4f948 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5e4f948, status 1 AtapiInterrupt: RequestComplete, srb 0xb5e4f948 AtapiInterrupt: NextRequest, srb=0xb5ddd7c8 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5ddd7c8, CDB 0xb5ddd7f8, AtaReq 0xb6783138, SCmd 0x2a UniataNeedQueueing: qd=3 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c09394 ** Ide: Command AtaReq 0xb6783138 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93c9e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6783138 AHCI AtaReq CMD 0xb6783200 (ph 0x8e46200) prd_length 0x9, flags 0x45, base 8e46200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5ddd7c8 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5ddd7c8, status 1 AtapiInterrupt: RequestComplete, srb 0xb5ddd7c8 AtapiInterrupt: NextRequest, srb=0xb5df6778 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb677d0a8, SCmd 0x2a UniataNeedQueueing: qd=2 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb677d0a8 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93d1e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8 AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180) prd_length 0x9, flags 0x45, base 8e40180 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0xb5de0478 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5de0478, CDB 0xb5de04a8, AtaReq 0xb6782120, SCmd 0x2a UniataNeedQueueing: qd=1 Send to device 2a Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf6c08e8c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (ExecOnly): AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f93d9e, Count 0x80(0x1) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x9, flags 0x45, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5de0478 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0 AHCI0_0x0 (0xf778d100) = 0x913c000 AHCI0_0x4 (0xf778d104) = 0x0 AHCI0_0x8 (0xf778d108) = 0x913c400 AHCI0_0xc (0xf778d10c) = 0x0 AHCI0_0x10 (0xf778d110) = 0x0 AHCI0_0x14 (0xf778d114) = 0xfd4000ff AHCI0_0x18 (0xf778d118) = 0xe017 AHCI0_0x1c (0xf778d11c) = 0x0 AHCI0_0x20 (0xf778d120) = 0xd0 AHCI0_0x24 (0xf778d124) = 0x101 AHCI0_0x28 (0xf778d128) = 0x123 AHCI0_0x2c (0xf778d12c) = 0x300 AHCI0_0x30 (0xf778d130) = 0x0 AHCI0_0x34 (0xf778d134) = 0x0 AHCI0_0x38 (0xf778d138) = 0x1 AHCI0_0x3c (0xf778d13c) = 0x0 AHCI: unexpected, incomplete command or error ? AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=0, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5de0478, status 1 AtapiInterrupt: RequestComplete, srb 0xb5de0478 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x8, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 AtapiStartIo: Flush (do nothing) AtapiStartIo: Srb 0xb5de0478 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b6789008, b5de0478) AtapiStartIo: UniataRemoveRequest(b6789008, b5de0478) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b6789008, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7665468 ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3960fe60, OrigWordsRequested 0x3700, DevSize 0x37 IdeReadWrite (REQ): Starting sector is 3960fe60, Number of WORDS 0x3700, DevSize 0x37 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f6c1e000, count 6e00, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f6c1e000) AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:15d7e000 ph data[0]=0:15d7e000 (fff) get Phys(data[n=1+1000]=f6c1f000) AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:13787000 ph data[1]=0:13787000 (fff) get Phys(data[n=2+1000]=f6c20000) AtapiVirtToPhysAddr_: f6c20000 -> 00000000:269c0000 ph data[2]=0:269c0000 (fff) get Phys(data[n=3+1000]=f6c21000) AtapiVirtToPhysAddr_: f6c21000 -> 00000000:13779000 ph data[3]=0:13779000 (fff) get Phys(data[n=4+1000]=f6c22000) AtapiVirtToPhysAddr_: f6c22000 -> 00000000:15d9a000 ph data[4]=0:15d9a000 (fff) get Phys(data[n=5+1000]=f6c23000) AtapiVirtToPhysAddr_: f6c23000 -> 00000000:15d9b000 ph data[4]=0:15d9a000 (1fff) get Phys(data[n=5+2000]=f6c24000) AtapiVirtToPhysAddr_: f6c24000 -> 00000000:137d4000 set TERM ph data[5]=0:137d4000 (dff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3960fe60, Count 0x37(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x6, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request (win32ss/user/ntuser/input.c:353) err: Raw Input Thread Exit! (ntoskrnl/po/poshtdwn.c:259) smss.exe is still RUNNING (00000060) (ntoskrnl/po/poshtdwn.c:259) csrss.exe is still RUNNING (00000090) (ntoskrnl/po/poshtdwn.c:259) winlogon.exe is still RUNNING (000000A0) NDIS_STATUS_MEDIA_DISCONNECT (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 3700, WordsLeft 3700 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 6e00, full size 6e00 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb5df6778, status 1 AtapiInterrupt: RequestComplete, srb 0xb5df6778 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0x3 & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 DeviceID+VendorID/Rev 0x43911002/0x0 imp: 0x3 & 0x1 SRB 0xb5df6778, CDB 0xb5df67a8, AtaReq 0xb6782120, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb5df6778 TopLevel (3), AtaReq 0xb6782120 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf77b560c ** Ide: Command AtaReq 0xb6782120 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 38f8f801, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 38f8f801, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb6782120: cmd aligned b6782200, d=80 ahci_cmd_ptr 0xb6782200 AtapiDmaSetup: mode 0x0, data f750fae0, count 200, lCh 0, dev 0 AtapiDmaSetup: Not DMA mode, assume this is just preparation get Phys(AHCI_CMD=b6782200) AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200 get Phys(data[0]=f750fae0) AtapiVirtToPhysAddr_: f750fae0 -> 00000000:084e9ae0 set TERM ph data[0]=0:84e9ae0 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b6782200, ch 0, dev 0 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x38f8f801, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120 AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200) prd_length 0x1, flags 0x5, base 8e45200 ReadChannelPort4 ch0[18] = 6017 CMD 0x6017 Set CI WriteChannelPort4 1 => ch0[38] No CMD START, already active IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b5df6778 AtapiStartIo: query PORT for next request