(boot/freeldr/freeldr/arch/i386/pcdisk.c:130) err: Disk Read Failed in LBA mode(ntoskrnl/kd/kdio.c:321) ----------------------------------------------------- (ntoskrnl/kd/kdio.c:322) ReactOS 0.4-SVN (Build 20110919-r53762) (ntoskrnl/kd/kdio.c:324) 1 System Processor [0 MB Memory] (ntoskrnl/kd/kdio.c:325) Command Line: /NOGUIBOOT /DEBUGPORT=COM1 /FIRSTCHANCE (ntoskrnl/kd/kdio.c:329) ARC Paths: multi(0)disk(0)cdrom(111) \ multi(0)disk(0)cdrom(111) \reactos\ (ntoskrnl/ke/i386/cpu.c:499) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_3DNOW KF_XMMI64 KF_NX_BIT (ntoskrnl/ke/i386/cpu.c:806) Prefetch Cache: 64 bytes L2 Cache: 1048576 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 16 (ntoskrnl/mm/ARM3/mminit.c:1228) HAL I/O Mapping at FFFE0000 is unsafe (ntoskrnl/ke/i386/kiinit.c:54) Large Page support detected but not yet taken advantage of (ntoskrnl/ke/i386/patpge.c:46) Global page support detected but not yet taken advantage of (ntoskrnl/ke/i386/patpge.c:60) PAT support detected but not yet taken advantage of (ntoskrnl/ke/i386/cpu.c:1086) Support for SYSENTER disabled. (ntoskrnl/ke/i386/mtrr.c:25) MTRR support detected but not yet taken advantage of (ntoskrnl/mm/mminit.c:243) 0x80000000 - 0x81000000 Boot Loaded Image (ntoskrnl/mm/mminit.c:247) 0xB0000000 - 0xB0C00000 PFN Database (ntoskrnl/mm/mminit.c:251) 0xB0C00000 - 0xB4BB8000 ARM³ Non Paged Pool (ntoskrnl/mm/mminit.c:255) 0xBC000000 - 0xBD000000 System View Space (ntoskrnl/mm/mminit.c:259) 0xBD000000 - 0xC0000000 Session Space (ntoskrnl/mm/mminit.c:262) 0xC0000000 - 0xC0300000 Page Tables (ntoskrnl/mm/mminit.c:265) 0xC0300000 - 0xC0400000 Page Directories (ntoskrnl/mm/mminit.c:268) 0xC0400000 - 0xC0800000 Hyperspace (ntoskrnl/mm/mminit.c:272) 0xE1000000 - 0xF2400000 ARM³ Paged Pool (ntoskrnl/mm/mminit.c:275) 0xF2400000 - 0xF7BE0000 System PTE Space (ntoskrnl/mm/mminit.c:278) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (hal/halx86/legacy/bussupp.c:591) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail! (hal/halx86/legacy/bussupp.c:620) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957] (rev 00) Subsystem: Unknown [1002:5957] Flags: bus master, 66MHz, medium devsel, latency 0 Memory at e0000000 (64-bit, non-prefetchable) [size=512M] 00:02.0 PCI bridge [0604]: RD790 PCI to PCI bridge (externa [1002:5978] (rev 00) Subsystem: GLoria L [0000:0000] Flags: bus master, latency 0, IRQ 10 Memory at 00010100 (32-bit, non-prefetchable) [size=256] I/O ports at 2000d1d0 [size=16] Memory at fea0fd00 (32-bit, non-prefetchable) [size=256] I/O ports at dff1ce00 [size=512] 00:07.0 PCI bridge [0604]: RD790 PCI to PCI bridge (PCI exp [1002:597d] (rev 00) Subsystem: GLoria L [0000:0000] Flags: bus master, latency 0, IRQ 11 Memory at 00020200 (32-bit, non-prefetchable) [size=512] I/O ports at 2000e1e0 [size=32] Memory at feb0feb0 (32-bit, non-prefetchable) [size=512] I/O ports at fbf1fbf0 [size=16] 00:11.0 IDE interface [0101]: SB700/SB800 SATA Controller [IDE [1002:4390] (rev 00) Subsystem: Unknown [1565:3700] Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 I/O ports at c000 [size=16K] I/O ports at b000 [size=4K] I/O ports at a000 [size=8K] I/O ports at 9000 [size=4K] I/O ports at 8000 [size=32K] Memory at fcfff800 (32-bit, non-prefetchable) [size=2K] 00:12.0 USB Controller [0c03]: SB700/SB800 USB OHCI0 Controller [1002:4397] (rev 00) Subsystem: Unknown [1565:3700] Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 Memory at fcffe000 (32-bit, non-prefetchable) [size=8K] Device is using IRQ 11! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (rev 00) Subsystem: Unknown [1565:3700] Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 11! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (rev 00) Subsystem: Unknown [1565:3700] Flags: 66MHz, medium devsel, latency 64, IRQ 10 Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:13.0 USB Controller [0c03]: SB700/SB800 USB OHCI0 Controller [1002:4397] (rev 00) Subsystem: Unknown [1565:3700] Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 Memory at fcffc000 (32-bit, non-prefetchable) [size=16K] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (rev 00) Subsystem: Unknown [1565:3700] Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 Memory at fcffb000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (rev 00) Subsystem: Unknown [1002:4396] Flags: 66MHz, medium devsel, latency 64, IRQ 11 Memory at fcffa800 (32-bit, non-prefetchable) [size=2K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: Unknown [1565:3700] Flags: 66MHz, medium devsel, latency 0 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 00) Subsystem: Unknown [1565:3700] Flags: bus master, 66MHz, medium devsel, latency 0 I/O ports at 0000 I/O ports at 0000 I/O ports at 0000 I/O ports at 0000 I/O ports at ff00 [size=256] 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 00) Subsystem: Unknown [1565:821f] Flags: bus master, fast devsel, latency 64, IRQ 11 Memory at fcff4000 (64-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 00) Subsystem: Unknown [1565:3700] Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 00) Subsystem: GLoria L [0000:0000] Flags: bus master, 66MHz, medium devsel, latency 64 Memory at 40030300 (32-bit, non-prefetchable) [size=256] Memory at 228000f0 (32-bit, non-prefetchable) [size=8M] Memory at 0000fff0 (32-bit, non-prefetchable) [size=256] Memory at 0000fff0 (32-bit, non-prefetchable) [size=256] 00:14.5 USB Controller [0c03]: SB700/SB800 USB OHCI2 Controller [1002:4399] (rev 00) Subsystem: Unknown [1002:4396] Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 Memory at fcff9000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:18.0 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron] [1022:1200] (rev 00) Subsystem: GLoria L [0000:0000] Flags: latency 0 00:18.1 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron] [1022:1201] (rev 00) Subsystem: GLoria L [0000:0000] Flags: latency 0 00:18.2 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron] [1022:1202] (rev 00) Subsystem: GLoria L [0000:0000] Flags: latency 0 00:18.3 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron] [1022:1203] (rev 00) Subsystem: GLoria L [0000:0000] Flags: latency 0 00:18.4 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron] [1022:1204] (rev 00) Subsystem: GLoria L [0000:0000] Flags: latency 0 01:00.0 VGA compatible controller [0300]: 82562GT-2 10/100 Network Connect [10de:10c3] (rev a2) Subsystem: Unknown [1462:2400] Flags: bus master, latency 0, IRQ 10 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at ce000000 (64-bit, prefetchable) [size=32M] I/O ports at d800 [size=2K] Device is using IRQ 10! ISA Cards using that IRQ may fail! 01:00.1 Audio device [0403]: nVidia Corporation Unknown device [10de:0be3] (rev a1) Subsystem: Unknown [1462:2400] Flags: bus master, latency 0, IRQ 11 Memory at fea7c000 (32-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 02:00.0 Ethernet controller [0200]: RTL8111/8168B PCI Express Gigabi [10ec:8168] (rev 03) Subsystem: Unknown [1565:2309] Flags: bus master, latency 0, IRQ 11 I/O ports at e800 [size=2K] Memory at fbfff000 (64-bit, prefetchable) [size=4K] Memory at fbff8000 (64-bit, prefetchable) [size=32K] Device is using IRQ 11! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (ntoskrnl/io/pnpmgr/pnpinit.c:404) Need to build DACL (ntoskrnl/io/pnpmgr/pnpmgr.c:2821) ZwOpenKey(\Registry\Machine\SYSTEM\CURRENTCONTROLSET\Control\Pnp) failed with status 0xc0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:2824) Firmware mapper is enabled (ntoskrnl/io/pnpmgr/pnpreport.c:346) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) ATAPI IDE MiniPort Driver (UniATA) v 0.40b2 Parameter PrintLogo AtapiCheckRegValue: Parameters -> PrintLogo is 0x0 Parameter PrintLogo = 0x0 (ntoskrnl/ex/sysinfo.c:118) User-mode list not yet supported in ReactOS! Init PsGetCurrentProcessId cur 0 GetProcAddr(NTOSKRNL.EXE,PsGetCurrentProcessId) = 808e7646 final Init PsGetCurrentThreadId cur 0 GetProcAddr(NTOSKRNL.EXE,PsGetCurrentThreadId) = 808f0120 final Init KeTestSpinLock cur 0 GetProcAddr(NTOSKRNL.EXE,KeTestSpinLock) = 8081071a final Init InterlockedIncrement cur 0 GetProcAddr(NTOSKRNL.EXE,InterlockedIncrement) = 8083f3be final Init InterlockedDecrement cur 0 GetProcAddr(NTOSKRNL.EXE,InterlockedDecrement) = 8083f3b5 final Init InterlockedExchangeAdd cur 0 GetProcAddr(NTOSKRNL.EXE,InterlockedExchangeAdd) = 8083f3ae final Init InterlockedCompareExchange cur 0 GetProcAddr(NTOSKRNL.EXE,InterlockedCompareExchange) = 8083f3d3 final Init HAL.DLL,KeRaiseIrqlToDpcLevel cur 0 GetProcAddr(HAL.DLL,KeRaiseIrqlToDpcLevel) = 80130331 final 80130331 Init HAL.DLL,KeRaiseIrqlToSynchLevel cur 0 GetProcAddr(HAL.DLL,KeRaiseIrqlToSynchLevel) = 80130356 final 80130356 Init NDIS.SYS,NdisInitializeReadWriteLock cur 0 (ntoskrnl/ex/sysinfo.c:118) User-mode list not yet supported in ReactOS! (ntoskrnl/ex/sysinfo.c:118) User-mode list not yet supported in ReactOS! GetProcAddr(NDIS.SYS,NdisInitializeReadWriteLock) = 0 final f7b852f0 Init NDIS.SYS,NdisAcquireReadWriteLock cur 0 (ntoskrnl/ex/sysinfo.c:118) User-mode list not yet supported in ReactOS! (ntoskrnl/ex/sysinfo.c:118) User-mode list not yet supported in ReactOS! GetProcAddr(NDIS.SYS,NdisAcquireReadWriteLock) = 0 final f7b85320 Init NDIS.SYS,NdisReleaseReadWriteLock cur 0 (ntoskrnl/ex/sysinfo.c:118) User-mode list not yet supported in ReactOS! (ntoskrnl/ex/sysinfo.c:118) User-mode list not yet supported in ReactOS! GetProcAddr(NDIS.SYS,NdisReleaseReadWriteLock) = 0 final f7b854e0 check CPU Gen CPU Gen f ILOCK ok UniATA Init: OS ver 5.2 (-1073738034) Performance calibration: dt=14995, counter=4122463 InitBadBlocks general InitBadBlocks returned: 0xc0000034 UniataInitAtaCommands: cmd 00: !28->48 -> 00 (00) cmd 01: !28->48 -> 01 (00) cmd 02: !28->48 -> 02 (00) cmd 03: !28->48 -> 03 (00) cmd 04: !28->48 -> 04 (00) cmd 05: !28->48 -> 05 (00) cmd 06: !28->48 -> 06 (00) cmd 07: !28->48 -> 07 (00) cmd 08: !28->48 -> 08 (00) cmd 09: !28->48 -> 09 (00) cmd 0a: !28->48 -> 0a (00) cmd 0b: !28->48 -> 0b (00) cmd 0c: !28->48 -> 0c (00) cmd 0d: !28->48 -> 0d (00) cmd 0e: !28->48 -> 0e (00) cmd 0f: !28->48 -> 0f (00) cmd 10: !28->48 -> 10 (00) cmd 11: !28->48 -> 11 (00) cmd 12: !28->48 -> 12 (00) cmd 13: !28->48 -> 13 (00) cmd 14: !28->48 -> 14 (00) cmd 15: !28->48 -> 15 (00) cmd 16: !28->48 -> 16 (00) cmd 17: !28->48 -> 17 (00) cmd 18: !28->48 -> 18 (00) cmd 19: !28->48 -> 19 (00) cmd 1a: !28->48 -> 1a (00) cmd 1b: !28->48 -> 1b (00) cmd 1c: !28->48 -> 1c (00) cmd 1d: !28->48 -> 1d (00) cmd 1e: !28->48 -> 1e (00) cmd 1f: !28->48 -> 1f (00) cmd 20: LBA -> 24 (03) cmd 21: !28->48 -> 21 (00) cmd 22: !28->48 -> 22 (00) cmd 23: !28->48 -> 23 (00) cmd 24: 48 LBA !28->48 -> 24 (05) cmd 25: DMA 48 LBA !28->48 -> 25 (0d) cmd 26: DMA 48 LBA !28->48 -> 26 (0d) cmd 27: !28->48 -> 27 (00) cmd 28: !28->48 -> 28 (00) cmd 29: 48 LBA !28->48 -> 29 (05) cmd 2a: DMA 48 LBA !28->48 -> 2a (0d) cmd 2b: DMA 48 LBA !28->48 -> 2b (0d) cmd 2c: !28->48 -> 2c (00) cmd 2d: !28->48 -> 2d (00) cmd 2e: !28->48 -> 2e (00) cmd 2f: !28->48 -> 2f (00) cmd 30: LBA -> 34 (03) cmd 31: !28->48 -> 31 (00) cmd 32: !28->48 -> 32 (00) cmd 33: !28->48 -> 33 (00) cmd 34: 48 LBA !28->48 -> 34 (05) cmd 35: DMA 48 LBA !28->48 -> 35 (0d) cmd 36: DMA 48 LBA !28->48 -> 36 (0d) cmd 37: !28->48 -> 37 (00) cmd 38: !28->48 -> 38 (00) cmd 39: 48 LBA !28->48 -> 39 (05) cmd 3a: DMA 48 LBA !28->48 -> 3a (0d) cmd 3b: DMA 48 LBA !28->48 -> 3b (0d) cmd 3c: !28->48 -> 3c (00) cmd 3d: DMA 48 LBA !28->48 -> 3d (0d) cmd 3e: DMA 48 LBA !28->48 -> 3e (0d) cmd 3f: !28->48 -> 3f (00) cmd 40: LBA -> 42 (03) cmd 41: !28->48 -> 41 (00) cmd 42: 48 LBA !28->48 -> 42 (05) cmd 43: !28->48 -> 43 (00) cmd 44: !28->48 -> 44 (00) cmd 45: !28->48 -> 45 (00) cmd 46: !28->48 -> 46 (00) cmd 47: DMA !28->48 -> 47 (08) cmd 48: !28->48 -> 48 (00) cmd 49: !28->48 -> 49 (00) cmd 4a: !28->48 -> 4a (00) cmd 4b: !28->48 -> 4b (00) cmd 4c: !28->48 -> 4c (00) cmd 4d: !28->48 -> 4d (00) cmd 4e: !28->48 -> 4e (00) cmd 4f: !28->48 -> 4f (00) cmd 50: !28->48 -> 50 (00) cmd 51: !28->48 -> 51 (00) cmd 52: !28->48 -> 52 (00) cmd 53: !28->48 -> 53 (00) cmd 54: !28->48 -> 54 (00) cmd 55: !28->48 -> 55 (00) cmd 56: !28->48 -> 56 (00) cmd 57: DMA !28->48 -> 57 (08) cmd 58: !28->48 -> 58 (00) cmd 59: !28->48 -> 59 (00) cmd 5a: !28->48 -> 5a (00) cmd 5b: !28->48 -> 5b (00) cmd 5c: !28->48 -> 5c (00) cmd 5d: DMA !28->48 -> 5d (08) cmd 5e: !28->48 -> 5e (00) cmd 5f: DMA !28->48 -> 5f (08) cmd 60: !28->48 -> 60 (00) cmd 61: !28->48 -> 61 (00) cmd 62: !28->48 -> 62 (00) cmd 63: !28->48 -> 63 (00) cmd 64: !28->48 -> 64 (00) cmd 65: !28->48 -> 65 (00) cmd 66: !28->48 -> 66 (00) cmd 67: !28->48 -> 67 (00) cmd 68: !28->48 -> 68 (00) cmd 69: !28->48 -> 69 (00) cmd 6a: !28->48 -> 6a (00) cmd 6b: !28->48 -> 6b (00) cmd 6c: !28->48 -> 6c (00) cmd 6d: !28->48 -> 6d (00) cmd 6e: !28->48 -> 6e (00) cmd 6f: !28->48 -> 6f (00) cmd 70: !28->48 -> 70 (00) cmd 71: !28->48 -> 71 (00) cmd 72: !28->48 -> 72 (00) cmd 73: !28->48 -> 73 (00) cmd 74: !28->48 -> 74 (00) cmd 75: !28->48 -> 75 (00) cmd 76: !28->48 -> 76 (00) cmd 77: !28->48 -> 77 (00) cmd 78: !28->48 -> 78 (00) cmd 79: !28->48 -> 79 (00) cmd 7a: !28->48 -> 7a (00) cmd 7b: !28->48 -> 7b (00) cmd 7c: !28->48 -> 7c (00) cmd 7d: !28->48 -> 7d (00) cmd 7e: !28->48 -> 7e (00) cmd 7f: !28->48 -> 7f (00) cmd 80: !28->48 -> 80 (00) cmd 81: !28->48 -> 81 (00) cmd 82: !28->48 -> 82 (00) cmd 83: !28->48 -> 83 (00) cmd 84: !28->48 -> 84 (00) cmd 85: !28->48 -> 85 (00) cmd 86: !28->48 -> 86 (00) cmd 87: !28->48 -> 87 (00) cmd 88: !28->48 -> 88 (00) cmd 89: !28->48 -> 89 (00) cmd 8a: !28->48 -> 8a (00) cmd 8b: !28->48 -> 8b (00) cmd 8c: !28->48 -> 8c (00) cmd 8d: !28->48 -> 8d (00) cmd 8e: !28->48 -> 8e (00) cmd 8f: !28->48 -> 8f (00) cmd 90: !28->48 -> 90 (00) cmd 91: !28->48 -> 91 (00) cmd 92: !28->48 -> 92 (00) cmd 93: !28->48 -> 93 (00) cmd 94: !28->48 -> 94 (00) cmd 95: !28->48 -> 95 (00) cmd 96: !28->48 -> 96 (00) cmd 97: !28->48 -> 97 (00) cmd 98: !28->48 -> 98 (00) cmd 99: !28->48 -> 99 (00) cmd 9a: !28->48 -> 9a (00) cmd 9b: !28->48 -> 9b (00) cmd 9c: !28->48 -> 9c (00) cmd 9d: !28->48 -> 9d (00) cmd 9e: !28->48 -> 9e (00) cmd 9f: !28->48 -> 9f (00) cmd a0: !28->48 -> a0 (00) cmd a1: !28->48 -> a1 (00) cmd a2: !28->48 -> a2 (00) cmd a3: !28->48 -> a3 (00) cmd a4: !28->48 -> a4 (00) cmd a5: !28->48 -> a5 (00) cmd a6: !28->48 -> a6 (00) cmd a7: !28->48 -> a7 (00) cmd a8: !28->48 -> a8 (00) cmd a9: !28->48 -> a9 (00) cmd aa: !28->48 -> aa (00) cmd ab: !28->48 -> ab (00) cmd ac: !28->48 -> ac (00) cmd ad: !28->48 -> ad (00) cmd ae: !28->48 -> ae (00) cmd af: !28->48 -> af (00) cmd b0: !28->48 -> b0 (00) cmd b1: !28->48 -> b1 (00) cmd b2: !28->48 -> b2 (00) cmd b3: !28->48 -> b3 (00) cmd b4: !28->48 -> b4 (00) cmd b5: !28->48 -> b5 (00) cmd b6: !28->48 -> b6 (00) cmd b7: !28->48 -> b7 (00) cmd b8: !28->48 -> b8 (00) cmd b9: !28->48 -> b9 (00) cmd ba: !28->48 -> ba (00) cmd bb: !28->48 -> bb (00) cmd bc: !28->48 -> bc (00) cmd bd: !28->48 -> bd (00) cmd be: !28->48 -> be (00) cmd bf: !28->48 -> bf (00) cmd c0: !28->48 -> c0 (00) cmd c1: !28->48 -> c1 (00) cmd c2: !28->48 -> c2 (00) cmd c3: !28->48 -> c3 (00) cmd c4: LBA -> 29 (03) cmd c5: LBA -> 39 (03) cmd c6: !28->48 -> c6 (00) cmd c7: DMA LBA -> 26 (0b) cmd c8: DMA LBA -> 25 (0b) cmd c9: !28->48 -> c9 (00) cmd ca: DMA LBA -> 35 (0b) cmd cb: !28->48 -> cb (00) cmd cc: DMA LBA -> 36 (0b) cmd cd: !28->48 -> cd (00) cmd ce: 48 LBA !28->48 -> ce (05) cmd cf: !28->48 -> cf (00) cmd d0: !28->48 -> d0 (00) cmd d1: !28->48 -> d1 (00) cmd d2: !28->48 -> d2 (00) cmd d3: !28->48 -> d3 (00) cmd d4: !28->48 -> d4 (00) cmd d5: !28->48 -> d5 (00) cmd d6: !28->48 -> d6 (00) cmd d7: !28->48 -> d7 (00) cmd d8: !28->48 -> d8 (00) cmd d9: !28->48 -> d9 (00) cmd da: !28->48 -> da (00) cmd db: !28->48 -> db (00) cmd dc: !28->48 -> dc (00) cmd dd: !28->48 -> dd (00) cmd de: !28->48 -> de (00) cmd df: !28->48 -> df (00) cmd e0: !28->48 -> e0 (00) cmd e1: !28->48 -> e1 (00) cmd e2: !28->48 -> e2 (00) cmd e3: !28->48 -> e3 (00) cmd e4: !28->48 -> e4 (00) cmd e5: !28->48 -> e5 (00) cmd e6: !28->48 -> e6 (00) cmd e7: LBA -> ea (03) cmd e8: !28->48 -> e8 (00) cmd e9: !28->48 -> e9 (00) cmd ea: 48 LBA !28->48 -> ea (05) cmd eb: !28->48 -> eb (00) cmd ec: !28->48 -> ec (00) cmd ed: !28->48 -> ed (00) cmd ee: !28->48 -> ee (00) cmd ef: !28->48 -> ef (00) cmd f0: !28->48 -> f0 (00) cmd f1: !28->48 -> f1 (00) cmd f2: !28->48 -> f2 (00) cmd f3: !28->48 -> f3 (00) cmd f4: !28->48 -> f4 (00) cmd f5: !28->48 -> f5 (00) cmd f6: !28->48 -> f6 (00) cmd f7: !28->48 -> f7 (00) cmd f8: !28->48 -> f8 (00) cmd f9: -> 37 (02) cmd fa: !28->48 -> fa (00) cmd fb: !28->48 -> fb (00) cmd fc: !28->48 -> fc (00) cmd fd: !28->48 -> fd (00) cmd fe: !28->48 -> fe (00) cmd ff: !28->48 -> ff (00) AtapiCheckRegValue: Paramaters\PnpInterface -> 1 is 0x0 AtapiCheckRegValue: Paramaters\PnpInterface -> 5 is 0x0 Parameter SkipRaids AtapiCheckRegValue: Parameters -> SkipRaids is 0x1 Parameter SkipRaids = 0x1 Parameter ForceSimplex AtapiCheckRegValue: Parameters -> ForceSimplex is 0x0 Parameter ForceSimplex = 0x0 Parameter LogToDisplay AtapiCheckRegValue: Parameters -> LogToDisplay is 0x0 Parameter LogToDisplay = 0x0 HwInitializationDataSize = 50 set NeedPhysicalAddresses = TRUE set AtapiAdapterControl() ptr ATAPI IDE enum supported BusMaster Devices Parameter VirtualMachineType AtapiCheckRegValue: Parameters -> VirtualMachineType is 0x0 Parameter VirtualMachineType = 0x0 Parameter VirtualBox AtapiCheckRegValue: Parameters -> VirtualBox is 0x0 Parameter VirtualBox = 0x0 -- BusID: 0x0:0x11:0x0 Storage Class DevId = 43901002 Class = 0001/0001 Parameter Include AtapiCheckRegValue: Parameters -> Include is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390\Slot_00000011 -> Include is 0x0 Parameter Include = 0x0 No force include, check exclude Parameter Exclude AtapiCheckRegValue: Parameters -> Exclude is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390\Slot_00000011 -> Exclude is 0x0 Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0xa Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x107 PCI_ENABLE_IO_SPACE InterruptLine = 0xa New pciData.Command = 0x107 PCI_ENABLE_MEMORY_SPACE InterruptLine = 0xa New pciData.Command = 0x107 PCI_ENABLE_BUS_MASTER InterruptLine = 0xa New pciData.Command = 0x107 Final pciData.Command = 0x107 Range 0 = 0xc001 Range 1 = 0xb001 Range 2 = 0xa001 Range 3 = 0x9001 Range 4 = 0x8001 Range 5 = 0xfcfff800 count: BMListLen++ -- BusID: 0x0:0x14:0x1 Storage Class DevId = 439C1002 Class = 0001/0001 Parameter Include AtapiCheckRegValue: Parameters -> Include is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> Include is 0x0 Parameter Include = 0x0 No force include, check exclude Parameter Exclude AtapiCheckRegValue: Parameters -> Exclude is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> Exclude is 0x0 Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0x0 Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x5 PCI_ENABLE_IO_SPACE InterruptLine = 0x0 New pciData.Command = 0x5 PCI_ENABLE_MEMORY_SPACE InterruptLine = 0x0 New pciData.Command = 0x5 PCI_ENABLE_BUS_MASTER InterruptLine = 0x0 New pciData.Command = 0x5 Final pciData.Command = 0x5 Range 4 = 0xff01 count: BMListLen++ -- BusID: 0x0:0x11:0x0 Storage Class DevId = 43901002 Class = 0001/0001 Parameter Include AtapiCheckRegValue: Parameters -> Include is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390\Slot_00000011 -> Include is 0x0 Parameter Include = 0x0 No force include, check exclude Parameter Exclude AtapiCheckRegValue: Parameters -> Exclude is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390\Slot_00000011 -> Exclude is 0x0 Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0xa Range 0 = 0xc001 Range 1 = 0xb001 Range 2 = 0xa001 Range 3 = 0x9001 Range 4 = 0x8001 Range 5 = 0xfcfff800 found suitable device -- BusID: 0x0:0x14:0x1 Storage Class DevId = 439C1002 Class = 0001/0001 Parameter Include AtapiCheckRegValue: Parameters -> Include is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> Include is 0x0 Parameter Include = 0x0 No force include, check exclude Parameter Exclude AtapiCheckRegValue: Parameters -> Exclude is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> Exclude is 0x0 Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0x0 Range 4 = 0xff01 found suitable device Parameter NativePCIMode AtapiCheckRegValue: Parameters -> NativePCIMode is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> NativePCIMode is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> NativePCIMode is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> NativePCIMode is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> NativePCIMode is 0x0 Parameter NativePCIMode = 0x0 Add to BMList, AltInit 0 -- BusID: 0x0:0x11:0x0 Storage Class DevId = 43901002 Class = 0001/0001 Parameter Include AtapiCheckRegValue: Parameters -> Include is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390\Slot_00000011 -> Include is 0x0 Parameter Include = 0x0 No force include, check exclude Parameter Exclude AtapiCheckRegValue: Parameters -> Exclude is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_4390\Slot_00000011 -> Exclude is 0x0 Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x1 InterruptLine = 0xa Range 0 = 0xc001 Range 1 = 0xb001 Range 2 = 0xa001 Range 3 = 0x9001 Range 4 = 0x8001 Range 5 = 0xfcfff800 found suitable device Add to BMList, AltInit 0 -- BusID: 0x0:0x14:0x1 Storage Class DevId = 439C1002 Class = 0001/0001 Parameter Include AtapiCheckRegValue: Parameters -> Include is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> Include is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> Include is 0x0 Parameter Include = 0x0 No force include, check exclude Parameter Exclude AtapiCheckRegValue: Parameters -> Exclude is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> Exclude is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> Exclude is 0x0 Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x1 InterruptLine = 0x0 Range 4 = 0xff01 found suitable device BMListLen=2 Parameter WaitBusyCount AtapiCheckRegValue: Parameters -> WaitBusyCount is 0xc8 Parameter WaitBusyCount = 0xc8 Parameter WaitBusyDelay AtapiCheckRegValue: Parameters -> WaitBusyDelay is 0xa Parameter WaitBusyDelay = 0xa Parameter WaitDrqDelay AtapiCheckRegValue: Parameters -> WaitDrqDelay is 0xa Parameter WaitDrqDelay = 0xa Parameter AtapiSendDisableIntr AtapiCheckRegValue: Parameters -> AtapiSendDisableIntr is 0x1 Parameter AtapiSendDisableIntr = 0x1 Parameter AtapiDmaRawRead AtapiCheckRegValue: Parameters -> AtapiDmaRawRead is 0x1 Parameter AtapiDmaRawRead = 0x1 ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard) ATAPI IDE: BMListLen 2 Parameter IgnoreIsaCompatiblePci AtapiCheckRegValue: Parameters -> IgnoreIsaCompatiblePci is 0x0 Parameter IgnoreIsaCompatiblePci = 0x0 Parameter IgnoreIsaCompatiblePci AtapiCheckRegValue: Parameters -> IgnoreIsaCompatiblePci is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> IgnoreIsaCompatiblePci is 0x0 Parameter IgnoreIsaCompatiblePci = 0x0 Try init channel 0, method 0 UniataFindBusMasterController: Context=0, BMListLen=2 ConfigInfo->Length 8c AdapterInterfaceType: Isa bm_offset 0, channel 0 AdapterInterfaceType=0x1 IoBusNumber=0x0 slotNumber=0x34 busDataRead DevId = 439C1002 Class = 0001/0001 Storage Class MasterDev (1) UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex AtapiCheckRegValue: Parameters -> ForceSimplex is 0x0 Parameter ForceSimplex = 0x0 i: 0x15 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 i: 0x8 HwFlags: 0x0 Parameter HwFlagsOverride AtapiCheckRegValue: Parameters -> HwFlagsOverride is 0x0 Parameter HwFlagsOverride = 0x0 HwFlagsOverride: 0x0 Parameter HwFlagsAdd AtapiCheckRegValue: Parameters -> HwFlagsAdd is 0x0 Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x0 MaxTransferMode: 0x46 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x46 Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 UniataChipDetectChannels: MasterDev -> 1 chan ATI New ATI PATA 1 chan allocate Luns for 1 channels ATI ForceSimplex = 0 HwFlags = 0 (0)HwFlags = 0 (1)HwFlags = 0 (2)found suitable device HwFlags = 0 (3)Range 4 = 0xff01 IsBusMaster == TRUE AtapiGetIoRange: AtapiGetIoRange: rid 0x4, start 0x0, offs 0x0, len 0x8, mem 0x0 AtapiGetIoRange: (2) 0xff00 BusMasterAddress (base): 0xff00 AtapiReadChipConfig: devExt 0xb496d2b4 AtapiReadChipConfig: dev 0x0, ph chan -1 Parameter ForceSimplex AtapiCheckRegValue: Parameters -> ForceSimplex is 0x0 Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x46 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x46 Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 Parameter AtapiDmaZeroTransfer AtapiCheckRegValue: Parameters -> AtapiDmaZeroTransfer is 0x0 Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd AtapiCheckRegValue: Parameters -> AtapiDmaControlCmd is 0x0 Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead AtapiCheckRegValue: Parameters -> AtapiDmaRawRead is 0x1 Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite AtapiCheckRegValue: Parameters -> AtapiDmaReadWrite is 0x1 Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x0, ph chan -2 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 ATI AtapiChipInit: dev 0x0, ph chan 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 ATI simplexOnly = 0 (2)MasterDev (2) 1 channels & 1 irq for 1 controller update ConfigInfo->nt4 update ConfigInfo->w2k Reconstruct ConfigInfo BMList[i].channel 0x0, NumberChannels 0x1, channel 0x0 de 0xb496d2b4, Channel 0x0 chan = 0xb496db60 AtapiReadChipConfig: devExt 0xb496d2b4 AtapiReadChipConfig: dev 0x0, ph chan 0 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\IDE_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> MaxTransferMode is 0x46 Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 Parameter ReorderEnable AtapiCheckRegValue: Parameters -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> ReorderEnable is 0x1 Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable AtapiCheckRegValue: Parameters -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_0 -> ReadCacheEnable is 0x1 Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable AtapiCheckRegValue: Parameters -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_0 -> WriteCacheEnable is 0x1 Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\IDE_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_0 -> MaxTransferMode is 0x46 Parameter MaxTransferMode = 0x46 Parameter PreferedTransferMode AtapiCheckRegValue: Parameters -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_0 -> PreferedTransferMode is 0xffffffff Parameter PreferedTransferMode = 0xffffffff Parameter ReadOnly AtapiCheckRegValue: Parameters -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_0 -> ReadOnly is 0x0 Parameter ReadOnly = 0x0 Parameter GeomType AtapiCheckRegValue: Parameters -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_0 -> GeomType is 0xffffffff Parameter GeomType = 0xffffffff Parameter Hidden AtapiCheckRegValue: Parameters -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_0 -> Hidden is 0x0 Parameter Hidden = 0x0 Parameter ReadCacheEnable AtapiCheckRegValue: Parameters -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_1 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_1 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_1 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_1 -> ReadCacheEnable is 0x1 Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable AtapiCheckRegValue: Parameters -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_1 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_1 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_1 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_1 -> WriteCacheEnable is 0x1 Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\IDE_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_1 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_1 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_1 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> MaxTransferMode is 0x46 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_1 -> MaxTransferMode is 0x46 Parameter MaxTransferMode = 0x46 Parameter PreferedTransferMode AtapiCheckRegValue: Parameters -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_1 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_1 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_1 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_1 -> PreferedTransferMode is 0xffffffff Parameter PreferedTransferMode = 0xffffffff Parameter ReadOnly AtapiCheckRegValue: Parameters -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_1 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_1 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_1 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_1 -> ReadOnly is 0x0 Parameter ReadOnly = 0x0 Parameter GeomType AtapiCheckRegValue: Parameters -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_1 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_1 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_1 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_1 -> GeomType is 0xffffffff Parameter GeomType = 0xffffffff Parameter Hidden AtapiCheckRegValue: Parameters -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_0\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_0\Chan_0\Lun_1 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Chan_0\Lun_1 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Chan_0\Lun_1 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Ven_1002\Dev_439c\Slot_00000034\Chan_0\Lun_1 -> Hidden is 0x0 Parameter Hidden = 0x0 set AccessRanges Getting IO ranges IO range 1 0x1f0 IO range 2 0x3f6 IDX_IO1 0->1f0(io) IDX_IO2 10->3f6(io) IDX_BM_IO 14->ff00(io) IDX_SATA_IO 19->0(io) AltStatus (0x7f) Reg_0x1 (0x1f1) = 0xff Reg_0x2 (0x1f2) = 0xff Reg_0x3 (0x1f3) = 0xff Reg_0x4 (0x1f4) = 0xff Reg_0x5 (0x1f5) = 0xff Reg_0x6 (0x1f6) = 0xff Reg_0x7 (0x1f7) = 0x7f BM_0x0 (0xff00) = 0x0 BM_0x1 (0xff01) = 0x0 BM_0x2 (0xff02) = 0x0 BM_0x3 (0xff03) = 0x0 claim Compatible controller claim Primary AtapiDmaAlloc: allocate tmp buffers below 4Gb exit: init spinlock MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0x0 Init ISR: Unnecessary MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0x0 return SP_RETURN_FOUND Attempt 0 of MasterDev ok (ntoskrnl/io/iomgr/iorsrce.c:882) IoReportResourceUsage is halfplemented! AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 ATI AtapiChipInit: dev 0xffffffff, ph chan 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 ATI FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 AtapiDisableInterrupts_0: 1 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 7f: DMA status 0x0 nobody home! 0xff != 0x55 AtapiEnableInterrupts_0: 2 AtapiDisableInterrupts_0: 1 CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 7f: DMA status 0x0 nobody home! 0xff != 0x55 AtapiEnableInterrupts_0: 2 AtapiEnableInterrupts_0: 1 FindDevices: returning 0 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiHwInitialize: (base) done TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x439c1002/0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device TopLevel (2), srb 0xf7a13e88 TopLevel (3), AtaReq 0xb4b88000 nobody home! 0xff != 0x55 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7a13e88 complete with status 0xa AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1 VendorID+DeviceID/Rev 0x439c1002/0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device TopLevel (2), srb 0xf7a13e88 TopLevel (3), AtaReq 0xb4b88000 nobody home! 0xff != 0x55 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7a13e88 complete with status 0xa AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x439c1002/0x0 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf7a13e88 complete with status 0x1 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0 VendorID+DeviceID/Rev 0x439c1002/0x0 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7a13e88 complete with status 0xa AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x439c1002/0x0 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7a13e88 complete with status 0xa AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreIsaCompatiblePci AtapiCheckRegValue: Parameters -> IgnoreIsaCompatiblePci is 0x0 AtapiCheckRegValue: Parameters\Chan_1 -> IgnoreIsaCompatiblePci is 0x0 Parameter IgnoreIsaCompatiblePci = 0x0 Try init channel 1, method 0 UniataFindBusMasterController: Context=0, BMListLen=2 ConfigInfo->Length 8c AdapterInterfaceType: Isa bm_offset 8, channel 1 AdapterInterfaceType=0x1 IoBusNumber=0x0 slotNumber=0x34 busDataRead DevId = 439C1002 Class = 0001/0001 Storage Class MasterDev (1) UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex AtapiCheckRegValue: Parameters -> ForceSimplex is 0x0 Parameter ForceSimplex = 0x0 i: 0x15 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 i: 0x8 HwFlags: 0x0 Parameter HwFlagsOverride AtapiCheckRegValue: Parameters -> HwFlagsOverride is 0x0 Parameter HwFlagsOverride = 0x0 HwFlagsOverride: 0x0 Parameter HwFlagsAdd AtapiCheckRegValue: Parameters -> HwFlagsAdd is 0x0 Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x0 MaxTransferMode: 0x46 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x46 Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 UniataChipDetectChannels: MasterDev -> 1 chan ATI New ATI no 2nd PATA chan FAILED => SP_RETURN_ERROR ScsiPortInitialize Status 0xc00000e5 make still one attempt Parameter IgnoreIsaCompatiblePci AtapiCheckRegValue: Parameters -> IgnoreIsaCompatiblePci is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> IgnoreIsaCompatiblePci is 0x0 Parameter IgnoreIsaCompatiblePci = 0x0 Try init channel 0, method 1 UniataFindBusMasterController: Context=80000000, BMListLen=2 ConfigInfo->Length 8c AdapterInterfaceType: Isa bm_offset 0, channel 0 AdapterInterfaceType=0x1 IoBusNumber=0x0 slotNumber=0x34 busDataRead DevId = 439C1002 Class = 0001/0001 Storage Class MasterDev (1) UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex AtapiCheckRegValue: Parameters -> ForceSimplex is 0x0 Parameter ForceSimplex = 0x0 i: 0x15 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 i: 0x8 HwFlags: 0x0 Parameter HwFlagsOverride AtapiCheckRegValue: Parameters -> HwFlagsOverride is 0x0 Parameter HwFlagsOverride = 0x0 HwFlagsOverride: 0x0 Parameter HwFlagsAdd AtapiCheckRegValue: Parameters -> HwFlagsAdd is 0x0 Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x0 MaxTransferMode: 0x46 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x46 Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 UniataChipDetectChannels: MasterDev -> 1 chan ATI New ATI PATA 1 chan allocate Luns for 1 channels ATI ForceSimplex = 0 HwFlags = 0 (0)HwFlags = 0 (1)HwFlags = 0 (2)found suitable device HwFlags = 0 (3)Error: Primary channel already claimed by another driver ScsiPortInitialize Status 0xc00000c0 Parameter IgnoreIsaCompatiblePci AtapiCheckRegValue: Parameters -> IgnoreIsaCompatiblePci is 0x0 AtapiCheckRegValue: Parameters\Chan_1 -> IgnoreIsaCompatiblePci is 0x0 Parameter IgnoreIsaCompatiblePci = 0x0 Try init channel 1, method 1 UniataFindBusMasterController: Context=80000000, BMListLen=2 ConfigInfo->Length 8c AdapterInterfaceType: Isa bm_offset 8, channel 1 AdapterInterfaceType=0x1 IoBusNumber=0x0 slotNumber=0x34 busDataRead DevId = 439C1002 Class = 0001/0001 Storage Class MasterDev (1) UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex AtapiCheckRegValue: Parameters -> ForceSimplex is 0x0 Parameter ForceSimplex = 0x0 i: 0x15 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 i: 0x8 HwFlags: 0x0 Parameter HwFlagsOverride AtapiCheckRegValue: Parameters -> HwFlagsOverride is 0x0 Parameter HwFlagsOverride = 0x0 HwFlagsOverride: 0x0 Parameter HwFlagsAdd AtapiCheckRegValue: Parameters -> HwFlagsAdd is 0x0 Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x0 MaxTransferMode: 0x46 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x46 Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 UniataChipDetectChannels: MasterDev -> 1 chan ATI New ATI no 2nd PATA chan FAILED => SP_RETURN_ERROR ScsiPortInitialize Status 0xc00000e5 make still one attempt !BMList[i].MasterDev ATAPI IDE: Look for PCI IDE controller ATAPI IDE: i 1, BMListLen 2 Parameter IgnoreNativePci AtapiCheckRegValue: Parameters -> IgnoreNativePci is 0x0 Parameter IgnoreNativePci = 0x0 Try init 1002 4390 (hal/halx86/legacy/bussupp.c:1149) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=1, BMListLen=2 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x0 slotNumber=0x11 busDataRead DevId = 43901002 Class = 0001/0001 Storage Class UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex AtapiCheckRegValue: Parameters -> ForceSimplex is 0x0 Parameter ForceSimplex = 0x0 i: 0x15 VendorID/DeviceID/Rev 0x1002/0x4390/0x0 i: 0x9 HwFlags: 0x12000000 Parameter HwFlagsOverride AtapiCheckRegValue: Parameters -> HwFlagsOverride is 0x12000000 Parameter HwFlagsOverride = 0x12000000 HwFlagsOverride: 0x12000000 Parameter HwFlagsAdd AtapiCheckRegValue: Parameters -> HwFlagsAdd is 0x0 Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x12000000 MaxTransferMode: 0x47 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0x47 Parameter MaxTransferMode = 0x47 MaxTransferMode (overriden): 0x47 UniataChipDetectChannels: SATA/AHCI -> possible PM, max luns 16 ATI allocate Luns for 2 channels ATI Parameter IgnoreAhci AtapiCheckRegValue: Parameters -> IgnoreAhci is 0x1 Parameter IgnoreAhci = 0x1 AHCI excluded FAILED => SP_RETURN_ERROR ScsiPortInitialize Status 0xc00000e5 Parameter IgnoreIsa AtapiCheckRegValue: Parameters -> IgnoreIsa is 0x0 Parameter IgnoreIsa = 0x0 ATAPI IDE: Look for ISA Controllers AtapiFindController: assume max PIO4 allocate Luns for 1 channels AtapiReadChipConfig: devExt 0xb496cd0c AtapiReadChipConfig: dev 0xffffffff, ph chan -1 Parameter ForceSimplex AtapiCheckRegValue: Parameters -> ForceSimplex is 0x0 AtapiCheckRegValue: Parameters\IDE_2 -> ForceSimplex is 0x0 AtapiCheckRegValue: Parameters\ISA_0 -> ForceSimplex is 0x0 Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0xc Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_2 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_0 -> MaxTransferMode is 0xc Parameter MaxTransferMode = 0xc MaxTransferMode (overriden): 0xc Parameter AtapiDmaZeroTransfer AtapiCheckRegValue: Parameters -> AtapiDmaZeroTransfer is 0x0 AtapiCheckRegValue: Parameters\IDE_2 -> AtapiDmaZeroTransfer is 0x0 AtapiCheckRegValue: Parameters\ISA_0 -> AtapiDmaZeroTransfer is 0x0 Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd AtapiCheckRegValue: Parameters -> AtapiDmaControlCmd is 0x0 AtapiCheckRegValue: Parameters\IDE_2 -> AtapiDmaControlCmd is 0x0 AtapiCheckRegValue: Parameters\ISA_0 -> AtapiDmaControlCmd is 0x0 Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead AtapiCheckRegValue: Parameters -> AtapiDmaRawRead is 0x1 AtapiCheckRegValue: Parameters\IDE_2 -> AtapiDmaRawRead is 0x1 AtapiCheckRegValue: Parameters\ISA_0 -> AtapiDmaRawRead is 0x1 Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite AtapiCheckRegValue: Parameters -> AtapiDmaReadWrite is 0x1 AtapiCheckRegValue: Parameters\IDE_2 -> AtapiDmaReadWrite is 0x1 AtapiCheckRegValue: Parameters\ISA_0 -> AtapiDmaReadWrite is 0x1 Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0xffffffff, ph chan -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x0/0x0/0x0 Parameter PortBase AtapiCheckRegValue: Parameters -> PortBase is 0x0 AtapiCheckRegValue: Parameters\IDE_2 -> PortBase is 0x0 AtapiCheckRegValue: Parameters\ISA_0 -> PortBase is 0x0 Parameter PortBase = 0x0 Parameter Irq AtapiCheckRegValue: Parameters -> Irq is 0x0 AtapiCheckRegValue: Parameters\IDE_2 -> Irq is 0x0 AtapiCheckRegValue: Parameters\ISA_0 -> Irq is 0x0 Parameter Irq = 0x0 AtapiFindController: AtdiskPrimaryClaimed Parameter PortBase AtapiCheckRegValue: Parameters -> PortBase is 0x0 AtapiCheckRegValue: Parameters\IDE_3 -> PortBase is 0x0 AtapiCheckRegValue: Parameters\ISA_1 -> PortBase is 0x0 Parameter PortBase = 0x0 Parameter Irq AtapiCheckRegValue: Parameters -> Irq is 0x0 AtapiCheckRegValue: Parameters\IDE_3 -> Irq is 0x0 AtapiCheckRegValue: Parameters\ISA_1 -> Irq is 0x0 Parameter Irq = 0x0 BaseIoAddress1=170 BaseIoAddress2=376 AtapiFindController: Identifier read back from Master (0x7f) de 0xb496cd0c, Channel ??? chan = 0xb4949008 AtapiReadChipConfig: devExt 0xb496cd0c AtapiReadChipConfig: dev 0xffffffff, ph chan 0 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\Chan_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_3 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_1 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> MaxTransferMode is 0xc Parameter MaxTransferMode = 0xc MaxTransferMode (overriden): 0xc Parameter ReorderEnable AtapiCheckRegValue: Parameters -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1 -> ReorderEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> ReorderEnable is 0x1 Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable AtapiCheckRegValue: Parameters -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_0 -> ReadCacheEnable is 0x1 Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable AtapiCheckRegValue: Parameters -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_0 -> WriteCacheEnable is 0x1 Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\Chan_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_3 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_1 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_0 -> MaxTransferMode is 0xc Parameter MaxTransferMode = 0xc Parameter PreferedTransferMode AtapiCheckRegValue: Parameters -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_0 -> PreferedTransferMode is 0xffffffff Parameter PreferedTransferMode = 0xffffffff Parameter ReadOnly AtapiCheckRegValue: Parameters -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_3 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\ISA_1 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_0 -> ReadOnly is 0x0 Parameter ReadOnly = 0x0 Parameter GeomType AtapiCheckRegValue: Parameters -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_0 -> GeomType is 0xffffffff Parameter GeomType = 0xffffffff Parameter Hidden AtapiCheckRegValue: Parameters -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Chan_0\Lun_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_3 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\ISA_1 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_0 -> Hidden is 0x0 Parameter Hidden = 0x0 Parameter ReadCacheEnable AtapiCheckRegValue: Parameters -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_1 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> ReadCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_1 -> ReadCacheEnable is 0x1 Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable AtapiCheckRegValue: Parameters -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_1 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> WriteCacheEnable is 0x1 AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_1 -> WriteCacheEnable is 0x1 Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode AtapiCheckRegValue: Parameters -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\Chan_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_3 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_1 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_1 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> MaxTransferMode is 0xc AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_1 -> MaxTransferMode is 0xc Parameter MaxTransferMode = 0xc Parameter PreferedTransferMode AtapiCheckRegValue: Parameters -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_1 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> PreferedTransferMode is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_1 -> PreferedTransferMode is 0xffffffff Parameter PreferedTransferMode = 0xffffffff Parameter ReadOnly AtapiCheckRegValue: Parameters -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_3 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_1 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\ISA_1 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> ReadOnly is 0x0 AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_1 -> ReadOnly is 0x0 Parameter ReadOnly = 0x0 Parameter GeomType AtapiCheckRegValue: Parameters -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_1 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> GeomType is 0xffffffff AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_1 -> GeomType is 0xffffffff Parameter GeomType = 0xffffffff Parameter Hidden AtapiCheckRegValue: Parameters -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\Chan_0\Lun_1 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_3 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_3\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\IDE_3\Chan_0\Lun_1 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\ISA_1 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\ISA_1\Chan_0 -> Hidden is 0x0 AtapiCheckRegValue: Parameters\ISA_1\Chan_0\Lun_1 -> Hidden is 0x0 Parameter Hidden = 0x0 AtapiChipInit: dev 0xffffffff, ph chan 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x0/0x0/0x0 UNIATA_NO80CHK AtapiFindController: Found IDE at 0x170 AtapiFindController: Atapi Only (2) AtapiFindController: look for devices FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 AtapiDisableInterrupts_0: 1 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 nobody home! 0x7f != 0x55 AtapiEnableInterrupts_0: 2 AtapiDisableInterrupts_0: 1 CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 7f: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found AltStatus (0x0) Reg_0x1 (0x171) = 0x1 Reg_0x2 (0x172) = 0x1 Reg_0x3 (0x173) = 0x1 Reg_0x4 (0x174) = 0x14 Reg_0x5 (0x175) = 0xeb Reg_0x6 (0x176) = 0xb0 Reg_0x7 (0x177) = 0x0 BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 ldev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: IPNOEE RVD-DWR VD-R FW: .100 S/N: FICQ629968LW Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20 SATA: 0 InitBadBlocks local LunExt 0xb4b87300 S/N:PIONEER_DVD-RW__DVR-118L________________-IFQC269986WL________ IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found AtapiEnableInterrupts_0: 2 FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x7f FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiFindController: detected AtapiFindController: return SP_RETURN_FOUND (ntoskrnl/io/iomgr/iorsrce.c:882) IoReportResourceUsage is halfplemented! AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1 HwFlags: 0x1000000 VendorID/DeviceID/Rev 0x0/0x0/0x0 AtapiChipInit: dev 0xffffffff, ph chan 0 HwFlags: 0x1000000 VendorID/DeviceID/Rev 0x0/0x0/0x0 UNIATA_NO80CHK FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 AtapiDisableInterrupts_0: 1 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 nobody home! 0x7f != 0x55 AtapiEnableInterrupts_0: 2 AtapiDisableInterrupts_0: 1 CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 7f: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found AltStatus (0x0) Reg_0x1 (0x171) = 0x1 Reg_0x2 (0x172) = 0x1 Reg_0x3 (0x173) = 0x1 Reg_0x4 (0x174) = 0x14 Reg_0x5 (0x175) = 0xeb Reg_0x6 (0x176) = 0xb0 Reg_0x7 (0x177) = 0x0 BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 ldev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: IPNOEE RVD-DWR VD-R FW: .100 S/N: FICQ629968LW Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20 SATA: 0 InitBadBlocks local LunExt 0xb4b87300 lib/rtl/nls.c:511: Pagable code called at IRQL > APC_LEVEL (12) Assertion 'FALSE' failed at ntoskrnl/rtl/libsupp.c line 212 Entered debugger on embedded INT3 at 0x0008:0x80903b9e. Intr: VendorID+DeviceID/Rev 0x0/0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): disabled INTR on ch 0 AtapiInterrupt(base): exit with status 0x0 Intr: VendorID+DeviceID/Rev 0x0/0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): disabled INTR on ch 0 AtapiInterrupt(base): exit with status 0x0 kdb:>